quick fire 1
TRANSCRIPT
-
8/9/2019 Quick Fire 1
1/10Page 1
Select File>New.
Set the size and resolution in
the New File control panel
File>New.
-
8/9/2019 Quick Fire 1
2/10Page 2
Select Layer>New
Change the layer name to Fire Layer
New Fire Layer added
Select Filter>Render>Clouds
Clouds Filter applied to Fire Layer
*** NOTE: Change the Foreground and
Background colors to the default Black
and White colors by clicking the D
key on the keyboard before running the
Clouds filter ***
-
8/9/2019 Quick Fire 1
3/10Page 3
Select Filter>Render>Difference Clouds
Difference Clouds Filter applied to Fire
Layer
Apply the Difference Clouds Filter to
the Fire Layer 10-12 times or until you get
a pattern like the one shown.
Select Image>Adjustments>Levels
-
8/9/2019 Quick Fire 1
4/10Page 4
Fire Layer Levels Histogram
Fire Layer Levels Histogram,showing
changes made to the white point slider.
By holding the Option Key(Mac) orr
Alt Key (PC) while moving the slider you
can watch and see where the highlightportions of the image start to become
blown out. Take the levels to the point
where they just start to overexpose.
Image>Adjustments>Levels results.
Notice that the Fire layer has a lot more
contrast.
Select Filter>Distort>Polar Coordinates
-
8/9/2019 Quick Fire 1
5/10Page 5
Select Polar to Rectangular in the Polar
Coordinates control panel.
Results of the Polar Coordinates Polar
to Rectangular distortion
Select Image>Rotate Canvas
>Flip Canvas Vertical
Canvas Flipped Vertical
-
8/9/2019 Quick Fire 1
6/10Page 6
Select the create New Fill or Adjustment
layer icon at the bottom of the layers
palette
Select Solid Color from the popout menu
Select a light Orange Color from the color
picker in this example the color values
are R-233,G-106,B-22
Solid Color Fill layer at Normal 100%
-
8/9/2019 Quick Fire 1
7/10Page 7
Solid Color Fill layer, layer Blend mode is
set at Normal 100%
Solid Color Fill layer, change the layer
Blend mode to Color Burn at 100%
Results of changing the layer Blend mode
to Color Burn at 100%
Select the create New Fill or Adjustment
layer icon at the bottom of the layers
palette
-
8/9/2019 Quick Fire 1
8/10Page 8
Select Solid Color from the popout menu
Select a light Red Color from the color
picker in this example the color values
are R-252,G-48,B-48
Solid Color Fill layer, layer Blend mode is
set at Normal 100%
Solid Color Fill layer at Normal 100%
-
8/9/2019 Quick Fire 1
9/10Page 9
Solid Color Fill layer, change the layerBlend mode to Screen at 20%
Results of changing the layer Blend mode
to Screen at 20%
Results of changing the layer Blend mode
to Screen at 10%
Solid Color Fill layer, change the layerBlend mode to Screen at 10%
-
8/9/2019 Quick Fire 1
10/10Page 10
By clicking on the Fire Layer and then
selecting Sharpen>Unsharp Mask you
can adjust the wildness of the flames by
applying, differing amounts of sharpening
Variations
Final Flame image being used as a back-
ground for a rescue company
Flatten Image when you are done.