Quick Guide

Mobile Locator

3

Thank you

Contents

for choosing Tracker.com! In the following pages you will find key information about how to operate your Mobile Locator.

The Mobile Locator is preconfigured and equipped with a SIM card. It works only with the SIM card ins-talled by Tracker.com. Any other use of the SIM card or swapping it out with another is not permitted.

Mobile Locator buttons and componentsFirst stepsSwitching on/offVolume controlKeypad lockSOS button, call buttonsPlacing a callAccepting an incoming callEnding a call, refusing a callGSM reception status displayBattery displayGPS reception status displayDashboard admin.tracker.comFinding a positionProgramming numbersLoading call credits

4–678889

10101011111112121212

54

Mobile Locator buttons and components(1) On/Off

(2) Volume control

(3) Keypad lock

(4) Mini USB socket

(5) GSM status display

(6) Battery display

(7) GPS status display

(8) SOS button

(9) Calling buttons 1–4

(10) Accept an incoming call

(11) End/refuse a call

(12) Loudspeaker

(13) Microphone

(1)(12)

(4)

(3)

(8)

(7)

(11)(13)

(10)

(9)

(6)

(5)

(2)

76

(4)

(3)

(1)

(2)

First steps1. Plug the supplied power adapter into the mini

USB socket (4) and charge the battery until the battery display (6) is constantly lit.

2. Hold the Mobile Locator outdoors, turn the unit on and wait approximately 2 minutes until the GPS position has been determined (also see page 11).

3. Check the position in the Dashboard at (https://admin.tracker.com) and also configure the call buttons 1–4 (at least one number must be entered).

4. While in the Dashboard, make sure that sufficient call credits are available.

The Mobile Locator is now ready and fully functional.

98

Switching on/off (1 or symbol)

Volume control (2)

Set the desired audio level with the volume control.Pressing the Quiet button for at least 3 seconds turns the Mute function on or off.

Switching onPush the On/Off button for a short time. The battery display (6) lights up for a short time and the GSM display (5) begins to flash.

Switching offPush the On/Off button for 3 seconds.

Keypad lock (3)

In order to avoid unintentional calls, the keypad lock (3) should be activated; to do so, slide it into the proper position (locked).

Triggering the alarm with the SOS button (8) func-tions even if the keypad is locked.

SOS button (8), call buttons 1–4 (9)Configuring the buttons with the desired numbers to call must be done ahead of time in the Dashboard (https://admin.tracker.com).

It is mandatory that the SOS button and/or call button #1 be configured with a number.

To initiate a call with the SOS button (8), push the button for at least 5 seconds.

The SOS button (8) functions even if the keypad is locked.

If the 7x24 Help Line option is activated, the SOS button is programmed to contact the emergency desk of the euro help line. If the 7x24 Help Line option is not activated, the SOS button is configured identical to call button (1).

The buttons can be reprogrammed at any time in the Dashboard (https://admin.tracker.com).

1110

Placing a call

Accepting an incoming call

To accept an incoming call, press the Call button (10).

To call the preprogrammed number, even if the keyboard lock (3) is activated, press the SOS button (8) at least 5 seconds. The connection is automati-cally made.To call one of the additional preprogrammed num-bers on call buttons 1–4, once the keypad lock (3) is released, first press button 1–4 and afterwards press the Call button (10).

Ending a call, refusing a call

To end a call or refuse an incoming call, press the Call Complete button (11).

GSM reception status display (5)Flashes quicklyConnection with the GSM network and tracker.com is being established.

Flashes slowlyThe unit is connected with the GSM network and tracker.com.

Battery display (6)

Status display for GPS reception (7)

Flashes slowlyCharging in progress.

Constantly litBattery fully charged.

Flashes quickly, beeps every 30 secondsCharging capacity at 5% - battery must be rechar-ged as soon as possible.

Flashes quicklySearch for satellites in progress.

Lights up constantly for 2 secondsThe GPS position is valid.

12

Dashboard admin.tracker.com

Finding a position

Recall the unit’s last known position or retrieve the current position.

Log on to the web site https://admin.tracker.com with your personal login information.

Programming telephone numbers

Loading call credits

Manage your account and configure your numbers to be called when the SOS button and call buttons 1–4 are pressed.

Load call credits in the Dashboard at https://admin.tracker.com.

Further information at https://admin.tracker.com.

tracker.ch AGZürcherstrasse 41CH-8400 WinterthurT: +41 43 543 43 00F: +41 43 543 43 01Info@tracker.ch

Hotline: +41 43 543 43 00support@tracker.ch

This equipment complies with the European R&TTE directive. Conformity at: http://www.tracker.com/CE

Free APP available in the AppStore and Android market

Version 2011-02