quick install

Qi DL UniQ - 927

75 - 83mm

450 lm

CRI > 90

2700K

NO INSTALLATION BOX IS REQUIRED

SUITABLE FOR DIFFERENT SIZED CUT-

OUT HOLES

HIGH EFFICIENCY

GOOD COLOR RENDERING

WARM WHITE LIGHT COLOR

75-83mm

NEW & UNIQ

More new articles:Qi DL Design

p. 4

‘2. www.quickinstall.no

75-83mm

When you choose a downlight from Quick Install both you and your custo-mer will save time and money. No installation box is required, and it can be mounted directly into the insulation. Excellent for rehabilitation of halogen systems.

The body of the downlight has a diameter of 72mm, while the ring areahas a diameter of 98mm. This makes the downlight suitable for cut-out holes ranging from 75mm to 83mm.

Recessed ring allows smooth and perfect surface connection without any gaps and shadows!

No installation box is required!

Suitable for different sized cut-out holes

Perfect fitting - no gaps between ceiling and downlight

Insulation

98mm

41,3mm

72mm

13mm

Ceiling 11mm

Installation space (using a 30mm plank)

30,3mm

‘www.quickinstall.no 3.

Qi DL UniQ - 927Approvedby Nemko

36˚ 35°Ø75

IP 21IP44F90°

Firerated

LED

75-83mm DIM

230V50/60Hz

• Quick installation, without installation box• 450lm - 7,5W - 230V• Adjustable: 35°. Light Angle: 36°. • The lamp has a satin touch, which provides a low glare.

UGR<19• Light colour warm white: 2700K • High color rendering: CRI > 90 • Cut-out hole: Ø75 - 83mm• IP44

• Firerated F90 (90 min)• Loop In, loop out connection (No crossing wires)• 5 year warranty w/8h daily use• Expected life (L70): 50 000 hours • Dimbar: Både forkant- og bakkant-dimmer kan benyttes. • Dimmable 1 - 100%

(See dimming guide on www.quickinstall.no)• H: 41,3mm Ø: 98mm

This LED downlight is quick and easy to install. It does not require any installation box; saves time and money! It fitsboth new buildings and home improvement. It has an attractive design, and provides a nice warm white LED light. It is firerated and approved for being installed into ceilings with a 90 min fire resistance in case of fire.

Benefits:• No installation box• Installation directly into the insulation area• Saves time on installation• Saves money

• LED - saves energy• Satisfied customers• No gaps between ceiling and downlight

Art.no. 3234413 927, round, white

Art.no. 3234414927, round, alu

Art.no. 3234415927, round, black

UNIQ DOWNLIGHT

*Coming spring 2015


Qi DL DesignApprovedby Nemko

36˚ 35°Ø75

IP 21IP44LED

83mm DIM

230V50/60Hz

• Quick installation, without installation box• 470lm - 10W - 230V• Tiltable: 35°. Light Angle: 36°• Light colour warm white: 2700K • High color rendering: CRI = 95 • Cut-out hole: 83 mm• IP44

• Loop In, loop out connection (No crossing wires)• 5 year warranty w/8h daily use• Expected life (L70): 50 000 hours • Dimmable 1 - 100%

(See dimming guide on www.quickinstall.no)• H: 57,9mm Ø: 98mm

This is another new downlight from Quick Install, with great light and design. Through the back positioning of the LED light source the downlight is glare free. The angle can be adjusted and it has a modern design.

Art.no. 3234430 Round, white

Art.no. 3234431Round, alu

*Coming spring 2015

Benefits:• No installation box• Installation directly into the insulation area• Saves time on installation• Saves money

• LED - saves energy• Satisfied customers• No gaps between ceiling and downlight

310,75mm

98,6mm

82,49mm

51,9

mm

25,1

mm

60,4

mm


Qi LED 230V track

This 230V track system has a sophisticated design and is easy to install! Due to the high flexi-bility it can be custumized to meet the individual requirements of the customer. Compact and slim design. Complete track length is 2 meters, including 4 spots with Osram 7W LED lamp (equivalent to 50W) and end connector.

The kit includes:• 4 pcs spots with Osram 7W LED lamp • 2 pcs 1m track • 1 pcs end powerfeed • 2 pcs “invisible” connector

Benefits:• Attractive design • Easy to install • No transformer • Flexible • Dimmable

• 2 pcs spots with Osram 7W LED lamp • 1 m track • 1pcs connector, both straight and 90º

Expand with multiple spots. 7W Osram lamp included (equivalent to 50W).

Universal, suitable for ”all” pendants. Simple up to 1,5 kg Double up to 3 kg.

Art.no.: 3300041Qi LED 230V track - starter set

Art.nr: 3300042Qi LED 230V track - extension set

Art.nr: 3300043Qi LED 230V track - spot

Art.nr: 3300044Qi LED 230V track - pendant

LED230V GU10 7,5W

Extension set

Qi LED 230V track - starter set

Trackspot Track pendant

VIDEO:

1:1

18 mm

18 mm


Art.nr. 3300000Qi LED ceiling lamp

Art.nr. 3300001Qi LED ceiling lamp w/sensor

Qi LED Ceiling lamp

Qi LED ceiling lamp Qi LED ceiling lamp w/sensor

Quick and easy installation as well as consistent light distribution. The LEDs are placed around the edge of the fixture, performing an even and well balanced light distribution! They fit over standard roof box.

LED 230V50/60Hz130˚

• LED 16W • 1000 lm • System Power: 20W • 230V • IP40 • Warm white light: 2700K

• Good color rendering, CRI: Ra>85

• Dimensions: Ø350mm, H99mm

• 5 years warranty, daily use of 8 hours

• LED 16W • 1000 lm • System Power: 20W • 230V • IP40 • Warm white light: 2700K

• Good color rendering, CRI: Ra>85

• Dimensions: Ø326mm, H98mm

• 5 years warranty, daily use of 8 hours

VIDEO:


Qi LED strips

Our complete LED strips - starter set is simple and easy to install. Total length of 5 meters. Extendable up to 10 meters by using our “Qi LED strips - extension set” on the same power supply (5m x 2). Automatic temperature control. LED strips are ideal for lots of purposes and can be used almost anywhere.

• IP67 (LED strips only) • 24 VDC LED strip, 60 LED pr. m.• 100-240V 96W • 500lm/m, 36W/5m • Dimmable (remote included)• Expected life: 50 000 hours

• PCB Color: white • 2700K, CRI > 80 • 5m per roll (cutable every 6 LEDs) • 3M adhesive tape, applied on the backside of LED strip • Working temp: -10ºC - + 40ºC

Extendable by 5 metres. Suitable in combination with Qi LED strips starter KIT, extendable to max length of 10m.

Complete set of RGB LED strips: quick and easy installa-tion. Automatic temperature control. 10 different modes - almost infinite variations and lighting applications.

Art.nr: 3300010Qi LED strips - starter set, WW

Art.nr: 3300011Qi LED strips - extension set

Art.nr: 3300012Qi LED strips - RGB set

Qi LED strips - extension set

Qi LED strips - starter set

Qi LED strips - RGB set

Included:• 5m LED strips • Power supply • Dimming Module • Remote control w / wall bracket • Installation and wiring materials

IP67LED 230V50/60Hz

VIDEO:


• Ultra slim - unique and innovative design • IP66• 3000K• Aluminium with bracket

• Expected life: 50 000 hours • 12W - 72W• Energy-efficiency and high performance

Art.nr. 3234480Qi LED floodlight - 12W

Qi LED floodlight

Unique and innovative lighting and compact design. Available in a range from 12W up to 72W. Expected lifetime 50 000 hours. With IP66 protection it is suitable for outdoor use.



Art.nr. 3234483Qi LED floodlight - 72W*

LUMEN TABLE:

12W = 960lm24W = 2000lm48W = 4000lm72W = 5400lm

IP66

12W: L 175mm, W 135mm, H 42mm24W: L 220mm, W 170mm, H 45mm48W: L 290mm, W 225mm, H 55mm72W: L 330mm, W 250mm, H 75mm

IP66LED

*Coming spring 2015


Qi EsyFold

Art.nr: 8801800

• No sharp edges• Can be used on both sides of the metal frames• Supports an easy cable installation within the metal frames,

regardless of the drilling direction

• Can be used in corners• Drills holes into metal frames quickly• Easy to use• Hole diameter ø28 mm

Qi EsyFold is a tool manufactured from hardened steel.The hole saw as well as the drill bit is replaceable. The saw design makes metal sawdust easily fall out of the drilled holes. The tool comes in a size that allows it to be easily stored in a toolbox or work vest.

Drills holes into metal

frames quickly

VIDEO:

No sharp edges


Art.nr. 1231202Qi Spotless Pro - dust collector

Qi Spotless Pro- dust collector

• No stains on the ceiling• Easily cleanable• Stain-free rubber securing a long lifetime and• no stains• Solid cup, made of acryl• The cup doesn’t rotate during operation

• Fits hole- saws from 32mm – 127mm• Ball bearing closed and greased. Securing a• long life.• Axle of semi-hardy compact steel• Spring, securing tightness against ceiling.• Satisfied customers and electricians

When drilling holes for downlights, wall installation boxes etc., there is a lot of dust emitted into the air. The inhalation of dust, dust in eyes, hair and clothes are vital issues an electrician has to deal with when doing these kinds of installations. Also the room, where an installation is being done, will be covered with dust. By using Qi Spotless Pro–Dust Collector you will avoid all of these problems. This is a need-to-have tool for all electricians!

Drills holes – without dust!• Avoid inhalation of dust• Avoid dust in eyes, ears and clothes• Dust-free installation site = no cleaning• Long life• No dust in your power-drill, enhancing the life length• SKS ball bearing• Fits most power drills• Solid cup of acryl• Contains 2 drill bits

‘Quick Install ASOur products are quick and easy to install, they have a beautiful design and the documentation is easy accesible.

Quick Install ASwww.quickinstall.no

[email protected]

Tlf: +47 38 60 44 00

quick install

Documents