quick selection guide 36cb chilled...
TRANSCRIPT
00 10 20 30 40 50 60
500
1000
1500
2000
IQID-360
IQID-300
IQID-240
IQID-180
Cooling effect in W incl supply air
Supply air flow, l/s
00 10 20 30 40 50
500
1000
1500Cooling effect in W, supply air included
Supply air flow, l/s
IQFC-300
IQFC-240
IQFC-180
IQFC-120
00 10 20 30 40 50
500
1000
1500Cooling effect in W, supply air included
Supply air flow, l/s
IQDA-300
IQDA-240
IQDA-180
�� �� �� �� 4� 5�
6��
4��
���
8��
����
����Cooling�effect�in�W,�supply�air�included
Supply�air�flow,�l/s
IQSA-300
IQSA-240
IQSA-180
IQSA-120
00 10 20 30 40 50
600
400
200
800
1000
1200Cooling effect in W, supply air included
Supply air flow, l/s
IQTA-300
IQTA-240
IQTA-180
36CB CHILLED BEAMS
DISCREET OPTIMUM COMFORT
Quick selection guideInduction beamsIQID• IQID chilled beam for flush mounting into false ceilings • Very flexible – available in a wide range of versions from basic to multifunctional • Suitable for standard 600 mm false ceiling modules • Mounting brackets for quick and easy mounting – lift up – snap on
• Available with the following functions: Comfort control, function for high air flow (2 hole rows), Flow Pattern Control (FPC air deflector), heating, control and regulation equipment, lighting and provision for a sprinkler system
IQFC• IQFC chilled beam for exposed installation • Air flow through beam is directed diagonally upwards • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable adjustment of air flow and capacity for inspection and cleaning • Patent pending sound attenuator • Enclosures for connections available as accessories • Mounting brackets for quick and easy mounting — lift up — snap on
IQDA• IQDA customized beam for exposed installation • Exclusive and slimline design • Capacity and flow directions are easily set • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on
IQSA• IQSA chilled beam for integration into false ceilings • Suitable for standard 300 mm false ceiling grids • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable inspection and cleaning • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on.
IQTA• IQTA chilled beam for exposed installation • Air and water connection within extended casing (300 mm/600 mm) • Available in three standard lengths, 210, 270 and 330 mm • Installed using special brackets attached to the wall or ceiling • The bottom plate can be pushed aside to enable inspection and cleaning.
Order No.: 18351-20, 02.2007 - Supersedes order No.: New Manufacturer reserves the right to change any product specifications without notice.
http://www.carrier.com
Chilled beam systems – design for optimum comfort
The 36CB range offers a comprehensive range of
air conditioning beams suitable for applications
where optimum comfort in the room is of importance.
Operating principles of Chilled beam systems
Active chilled beam systems use primary air that has been pre-cooled using chilled water and dimensioned to fulfil the requirements of good air quality for the occupied area. Induced room air is then cooled or heated by the beam to meet the room requirements.
“The 36CB range is a complete range of chilled beams and accessories suitable for ventilation, cooling and heating in all applications including high cooling demands and/or where there is a requirement for individual temperature control.”
New chilled beam 36CB - IQID –From a basic beam to a multi-service beam
Chilled beams with FPC (Flow Pattern Control)
The 36CB IQID is an integrated system for
ventilation, cooling and heating, fulfilling
most indoor air requirements:
• Comfort Control
• High air flow function
(2 rows of holes)
• Flow pattern control
• Heating
• Controls
• Lighting and provision
for a sprinkler system.
The 36CB is truly unique with the FPC (Flow Pattern Con-
trol) function that provides high flexibility in new buildings or
refurbishments. The combination of FPC and Comfort Control
gives the 36CB beam its unique characteristics.IQ Beams with FPC function• Adjustable air vanes in the outlet• Optimized for minimal noise and pressure drop
IQ Beams with FPC functionHighest possible efficiency can be maintained by adjusting the Comfort Control and air vanes! A combination of different angles on one side is possible.
When increased air flow is required, the flow pattern can be adapted to maintain optimal comfort in the room!
Designed to ensure draught-free and quiet air flow for perfect
room air comfort conditions, the 36CB range offers a cooling
and heating solution combined with efficient ventilation and
ensures:
• Energy savings
• Advanced comfort
• Flexibility
• Multi-service integration.
• Sections of 300 mm• Adjustable air vanes: 0° + 15° + 30° + 45°• Unique combination with Comfort Control
Chilled beam systems – design for optimum comfort
The 36CB range offers a comprehensive range of
air conditioning beams suitable for applications
where optimum comfort in the room is of importance.
Operating principles of Chilled beam systems
Active chilled beam systems use primary air that has been pre-cooled using chilled water and dimensioned to fulfil the requirements of good air quality for the occupied area. Induced room air is then cooled or heated by the beam to meet the room requirements.
“The 36CB range is a complete range of chilled beams and accessories suitable for ventilation, cooling and heating in all applications including high cooling demands and/or where there is a requirement for individual temperature control.”
New chilled beam 36CB - IQID –From a basic beam to a multi-service beam
Chilled beams with FPC (Flow Pattern Control)
The 36CB IQID is an integrated system for
ventilation, cooling and heating, fulfilling
most indoor air requirements:
• Comfort Control
• High air flow function
(2 rows of holes)
• Flow pattern control
• Heating
• Controls
• Lighting and provision
for a sprinkler system.
The 36CB is truly unique with the FPC (Flow Pattern Con-
trol) function that provides high flexibility in new buildings or
refurbishments. The combination of FPC and Comfort Control
gives the 36CB beam its unique characteristics.IQ Beams with FPC function• Adjustable air vanes in the outlet• Optimized for minimal noise and pressure drop
IQ Beams with FPC functionHighest possible efficiency can be maintained by adjusting the Comfort Control and air vanes! A combination of different angles on one side is possible.
When increased air flow is required, the flow pattern can be adapted to maintain optimal comfort in the room!
Designed to ensure draught-free and quiet air flow for perfect
room air comfort conditions, the 36CB range offers a cooling
and heating solution combined with efficient ventilation and
ensures:
• Energy savings
• Advanced comfort
• Flexibility
• Multi-service integration.
• Sections of 300 mm• Adjustable air vanes: 0° + 15° + 30° + 45°• Unique combination with Comfort Control
00 10 20 30 40 50 60
500
1000
1500
2000
IQID-360
IQID-300
IQID-240
IQID-180
Cooling effect in W incl supply air
Supply air flow, l/s
00 10 20 30 40 50
500
1000
1500Cooling effect in W, supply air included
Supply air flow, l/s
IQFC-300
IQFC-240
IQFC-180
IQFC-120
00 10 20 30 40 50
500
1000
1500Cooling effect in W, supply air included
Supply air flow, l/s
IQDA-300
IQDA-240
IQDA-180
�� �� �� �� 4� 5�
6��
4��
���
8��
����
����Cooling�effect�in�W,�supply�air�included
Supply�air�flow,�l/s
IQSA-300
IQSA-240
IQSA-180
IQSA-120
00 10 20 30 40 50
600
400
200
800
1000
1200Cooling effect in W, supply air included
Supply air flow, l/s
IQTA-300
IQTA-240
IQTA-180
36CB CHILLED BEAMS
DISCREET OPTIMUM COMFORT
Quick selection guideInduction beamsIQID• IQID chilled beam for flush mounting into false ceilings • Very flexible – available in a wide range of versions from basic to multifunctional • Suitable for standard 600 mm false ceiling modules • Mounting brackets for quick and easy mounting – lift up – snap on
• Available with the following functions: Comfort control, function for high air flow (2 hole rows), Flow Pattern Control (FPC air deflector), heating, control and regulation equipment, lighting and provision for a sprinkler system
IQFC• IQFC chilled beam for exposed installation • Air flow through beam is directed diagonally upwards • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable adjustment of air flow and capacity for inspection and cleaning • Patent pending sound attenuator • Enclosures for connections available as accessories • Mounting brackets for quick and easy mounting — lift up — snap on
IQDA• IQDA customized beam for exposed installation • Exclusive and slimline design • Capacity and flow directions are easily set • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on
IQSA• IQSA chilled beam for integration into false ceilings • Suitable for standard 300 mm false ceiling grids • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable inspection and cleaning • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on.
IQTA• IQTA chilled beam for exposed installation • Air and water connection within extended casing (300 mm/600 mm) • Available in three standard lengths, 210, 270 and 330 mm • Installed using special brackets attached to the wall or ceiling • The bottom plate can be pushed aside to enable inspection and cleaning.
Order No.: 18351-20, 02.2007 - Supersedes order No.: New Manufacturer reserves the right to change any product specifications without notice.
http://www.carrier.com