quick setup guide 1. location - cloud object storage ... · réglages des commutateurs 5. filage...
TRANSCRIPT
© 2014 552_Q - 02/141A Watts Water Technologies Company
tekmarNet® Thermostat 552
Quick Setup Guide
552_Q02/14
Zoning Replaces: 12/13
1. Location
2. Remove Mounting Base
3. Install Mounting Base
ExteriorWall
BehindDoor
InteriorWall
5 feet1.5 m
3 1/4”(83 mm)
ThermostatBase
Stud
SwitchBox
Wall
StudThermostat
Base
© 2014 552_Q - 02/142A Watts Water Technologies Company
4. Switch Settings
5. Wiring
Switch Position Action
1ON LOCK Access level adjustment is not
available.
OFF UNLOCK Access level adjustment is available.
tNt 552One Stage Heat
Mmm YYYYLot # 12345
Power: 24 V ±10% 50/60 Hz 1.7 VA
1051-03
witc
h S
ettin
gs:
Set
back
Sce
ne
Non
e
ON
ool M
aste
r 1
ffn loc
k
1 2 3
/
tekmarNet Thermostat 552One Stage Heat
P N2 24 V ( ) 10% 1 8 VA
1051-03
Switch
Settings
www.tekmarcontrols.com
Lock
sed
ock
/
ON
1 2
Back of Thermostat
tN2 tN2C
tN2tN4tN2
RRh W1
tekmarNet®2
To tN2 device
Thermostat
CtN2
tN4tN2
RRh W1
tN4 C WR
tekmarNet®4
To tN4 device
Thermostat
W(T)(T)R
24 V
W(T)(T)R
H NX X H N H N N L
N L
Com Switching Relay
Zone 1
Pump
Zone 2 Zone 3
W(T)(T)R
CtN2
tN4tN2
RRh W1
Standalone - Switching Relay
Thermostat
© 2014 552_Q - 02/143A Watts Water Technologies Company
6. Install Thermostat
Standalone - Zone Valve
CtN2
tN4tN2
R
R
C
L
N
Rh W1
Thermostat
24 V (ac) Transformer
Valve
No Power
S1 S2Com
Thermostat
Sensors5. Wiring (Continued)
ThermostatFront
Push
ThermostatBase
Adjustthe Time
Adjust theSchedule
Display theFloor or Outdoortemperature
Away Key
Turn the Heat on
or OffHome Button.Return to the ‘Home’ Screen from any menu. Press and hold for 3 seconds to access the programming menus
Adjust the Temperature
RoomTemperature
HomeButton
7. User Interface
All specifications are subjectto change without notice
4 552_Q - 02/14.
Product design, software and literature are Copyright ©2014 by tekmar Control Systems Ltd., A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road, Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com
For a full list of settings and operational details, please refer to the thermostat Installation and Operation Manual (552_D) included with compatible tekmarNet® controls or download the brochure from www.tekmarcontrols.com
8. Critical SettingsThe following settings are essential to the successful operation of the system.Step 1: Set switch setting #1 and tekmarNet® system control located in the mechanical room to Unlock to change Access level to Installer. Return to Lock setting once installation has been completed.Step 2: Press and hold “Home” button for 3 seconds to enter programming menus.Step 3: Touch NEXT to locate the Setup Menu and touch ENTER.
Setup Menu SettingsSENSOR 1Select to the type of sensor connected to auxiliary sensor input 1.
Range: OFF, ROOM, FLOR (floor), OUT (outdoor)
Default: OFF
SENSOR 2Select to the type of sensor connected to auxiliary sensor input 2.
Range: OFF, ROOM, FLOR (floor)
Default: OFF
ROOM SENSORSelect whether the built-in room temperature sensor is on or off.
Range: OFF or ON
Default: ON
W1 TERMINAL UNITSelect the terminal unit type of the first stage of heat W1.
Range: CTRL, HRF1, HRF2, CONV, COIL, OTHR
Default: CTRL
Setup Menu SettingsW1 PUMPSelect whether the boiler system pump or mix system pump on a tekmarNet® system control should operate while the first stage of heat W1 is operating.
Range: OFF or ON
Default: ON
W1 THERMAL MOTORSelect whether the first stage of heat W1 operates a thermally actuated zone valve (wax actuator). When set to ON, there is a 3 minute delay before operating the pump and any heat sources.
Range: OFF or ON
Default: OFF
W CYCLES PER HOURSelect the number of heating cycles per hour. Only available when the thermostat is not connected to a tekmarNet® System Control.
Range: SYNC, AUTO, 2 to 12
Default: SYNC
© 2014 552_Q - 02/145Une Entreprise de Watts Water Technologies
1. Emplacement
2. Retirez la base de montage
3. Installez la base de montage
3 1/4”(83 mm)
ThermostatBase
Stud
SwitchBox
Wall
StudThermostat
Base
Mur extérieur
Mur intérieur
5 pi.1,5 m
Mur
Base de thermostat
Base de thermostat
Commutateur boîte
GoujonGoujon
tekmarNet® Thermostat 552
Guide d'installation rapide
552_Q02/14
Zonage Remplace: 12/13
Derrièreporte
© 2014 552_Q - 02/146Une Entreprise de Watts Water Technologies
4. Réglages des commutateurs
5. Filage
Commutateur Position Action
1
ONVERROUILLAGE Le réglage du niveau d'accès n'est pas disponible.
OFFDÉVERROUILLAGE Le réglage du niveau d'accès est disponible.
tNt 552One Stage Heat
Mmm YYYYLot # 12345
Power: 24 V ±10% 50/60 Hz 1.7 VA
1051-03
witc
h S
ettin
gs:
Set
back
Sce
ne
Non
e
ON
ool M
aste
r 1
ffn loc
k
1 2 3
/
tekmarNet Thermostat 552One Stage Heat
P N2 24 V ( ) 10% 1 8 VA
1051-03
Switch
Settings
www.tekmarcontrols.com
Lock
sed
ock
/
ON
1 2
Dos du thermostat
tN2 tN2C
tN2tN4tN2
RRh W1
tekmarNet®2
Au dispositif tN2
Thermostat
CtN2
tN4tN2
RRh W1
tN4 C WR
tekmarNet®4
Au dispositif tN4
Thermostat
W(T)(T)R
24 V
W(T)(T)R
H NX X H N H N N L
N L
Com Switching Relay
Zone 1
Pump
Zone 2 Zone 3
W(T)(T)R
CtN2
tN4tN2
RRh W1
Relais de commutation - Autonome
Thermostat
Relais de commutation
Pompe
© 2014 552_Q - 02/147Une Entreprise de Watts Water Technologies
6. Installer le Thermostat
Zone de Soupape - Autonome
CtN2
tN4tN2
R
R
C
L
N
Rh W1
Thermostat
24 V (ca) Transformateur Soupape
5. Filage (suite)
7. Interface d’utilisateur
No Power
S1 S2Com
Thermostat
Capteurs
Pas d’alimentation
Base de thermostat
Façade du thermostat
Poussoir
Régler l’heure
Régler le programme
Clè à distance
Activer ou déactiver la
chaleur
Afficher latempérature au sol ou à l’extérieure
Température de la chambre
Régler la température
Bouton daccueil. Revenir à l’écran «Home» (Accueil) depuis n’importe quel menu. Appuyez et maintenez enfoncé pendant 3 secondes pour accéder aux menus de programmation
Home
Toutes spécifications sont sujettes à changements sans préavis. Imprimé au Canada.
8 552_Q - 02/14.
Conception de produit, logiciel et littérature sont des droits réservés ©2014 par tekmar Control Systems Ltd., Une Entreprise de Watts Water Technologies. Bureau Principal: 5100 Silver Star Road, Vernon, B.C. Canada V1B 3K4, 250-545-7749, Téléc: 250-545-0650 Site Web: www.tekmarControls.com
Pour une liste complète des paramètres et les détails opérationnels, s’il vous plaît se référer à l’installation du thermostat et mode d’emploi (552_D) inclus avec les compatible tekmarNet® contrôles ou télécharger la brochure depuis www.tekmarcontrols.com
8. Paramètres critiquesLes paramètres suivants sont essentiels au bon fonctionnement du système.Étape 1: Définir le réglage du commutateur sur #1 et le système de contrôle tekmarNet® situé dans la salle mécanique sur Déverrouiller pour changer le niveau d'accès à l'installateur. Retour pour Verrouiller réglage, une fois l'installation terminée.Étape 2: Appuyez et maintenez le bouton «Home» pendant 3 secondes pour entrer dans les menus de programmation.Étape 3: Touchez SUIVANT pour localiser le menu de configuration et appuyez sur ENTRER.
Réglages du menu de configuration
CAPTEUR 1Sélectionner le type de capteur relié à l'entrée auxiliaire du capteur 1.
Gamme: OFF, CHAMBRE, FLOR (étage), OUT (en plein air)
Par défaut: OFF
CAPTEUR 2Sélectionner le type de capteur relié à l'entrée auxiliaire du capteur 2.
Gamme: OFF, CHAMBRE, FLOR (étage)
Par défaut: OFF
CAPTEUR DE CHAMBRESélectionnez si le capteur intégré de la température ambiante est allumé ou éteint.
Gamme: OFF ou ON
Par défaut: ON
UNITÉ DU TERMINAL W1Sélectionner le type d'unité du terminal de la première étape de chauffage W1.
Gamme: CTRL, HRF1, HRF2, CONV, COIL, OTHR (AUTRE)
Par défaut: CTRL
Réglages du menu de configurationPOMPE W1Selectionnez soit la pompe du système de la chaudière ou la pompe du système de mélange du système de tekmarNet® doit fonctionner pendant la première étape de fonctionnement de chauffage W1.
Gamme: OFF ou ON
Par défaut: ON
MOTEUR THERMIQUE W1Sélectionner si la première étape de chauffage de W1 active une soupape de zone actionnée thermiquement (actuateur a cire). Lorsqu'elle est activée, il ya un délai de 3 minutes avant de faire fonctionner la pompe et n’importe quelle sources de chaleur.
gamme: OFF ou ONPar défaut: OFFW CYCLES PAR HEURESélectionnez le nombre de cycles de chauffage par heure. Uniquement disponible lorsque le thermostat n'est pas connecté à un Système de Contrôle tekmarNet®.Gamme: SYNC, AUTO, 2 à 12
Par défaut: SYNC
© 2014 552_Q - 02/149Una Compañía de Watts Water Technologies
1. Ubicación
2. Quite la base de montaje
3. Instalación de la base de montaje
Pared exterior
Pared interior
5 pies1,5 m
Wall
StudThermostat
BaseBase del
termostato
Pared
3 1/4”(83 mm)
ThermostatBase
Stud
SwitchBox
Base del termostato
Caja de interruptor
tekmarNet® Thermostat 552
Guía de instalación rápida
552_Q02/14
División en zonas
Remplazado por: 12/13
Detrásde la puerta
© 2014 552_Q - 02/1410Una Compañía de Watts Water Technologies
4. Ajustes del interruptor
5. Cableado
Interruptor Posición Acción
1
ONLOCK (BLOQUEADO) el nivel de acceso para ajustes se encuentra bloqueado.
OFFUNLOCK (DESBLOQUEADO) el nivel de acceso para ajustes se encuentra disponible.
tNt 552One Stage Heat
Mmm YYYYLot # 12345
Power: 24 V ±10% 50/60 Hz 1.7 VA
1051-03
witc
h S
ettin
gs:
Set
back
Sce
ne
Non
e
ON
ool M
aste
r 1
ffn loc
k
1 2 3
/
tekmarNet Thermostat 552One Stage Heat
P N2 24 V ( ) 10% 1 8 VA
1051-03
Switch
Settings
www.tekmarcontrols.com
Lock
sed
ock
/
ON
1 2
Parte trasera del termostato
tN2 tN2C
tN2tN4tN2
RRh W1
tekmarNet®2
tN2 control de zones
Termostato
CtN2
tN4tN2
RRh W1
tN4 C WR
tekmarNet®4
tN4 control de zonesTermostato
W(T)(T)R
24 V
W(T)(T)R
H NX X H N H N N L
N L
Com Switching Relay
Zone 1
Pump
Zone 2 Zone 3
W(T)(T)R
CtN2
tN4tN2
RRh W1
Relé de acoplado – Independiente
Termostato
Relé de acoplado
Bomba
© 2014 552_Q - 02/1411Una Compañía de Watts Water Technologies
6. Instalación del termostato
Válvula de zona – Independiente
CtN2
tN4tN2
R
R
C
L
N
Rh W1
Termostato
24 V (ca) Transformador Válvula
No Power
S1 S2Com
Termostato
Sensores5. Cableado (continuación)
7. Interfaz del usuario
Base del termostato
Frente del termostato
Eempuje
Ajustar hora
Ajustar la programación
Tecla de salida
Prender o apagar la
calefacción
Mostrar la temperatura del Piso o del Exterior
Temperatura ambiente
Ajustar la temperatura
Botón Inicio. Vuelva a la pantalla inicial desde cualquier otro menú. Mantenga presionado por 3 segundos para acceder al menú del programa
Home
Todas las especificaciones pueden cambiar sin previo aviso.
12 552_Q - 02/14.
El diseño del producto, software y la literatura poseen derechos reservados ©2014 a nombre de tekmar Control Systems Ltd., Una Compañía de Watts Water Technologies Ofi cina Principal: 5100 Silver Star Road, Vernon, B.C. Canadá V1B 3K4, 250-545-7749, Fax. 250-545-0650 Sitio web: www.tekmarControls.com
8. Ajustes críticosLas siguientes configuraciones son esenciales para que el sistema trabaje de manera correcta.Paso 1: Desbloquee (opción UNLOCK) el ajuste número uno del interruptor y del control del sistema tekmarNet® para cambiar el nivel de accesibilidad a Instalador. Cámbielo nuevamente a Bloquear (opción Lock) luego de finalizar la instalación.Paso 2: Mantenga presionado el botón “Home” por 3 segundos para ingresar a los menús de programación.Paso 3: Presione el botón NEXT (SIGUIENTE) para localizar el menú de SETUP (Instalación) y presione ENTER (ENTRAR).
Ajustes del menú de instalaciónSENSOR 1Seleccione el tipo de sensor conectado a la entrada número 1 para sensor auxiliares.
Rango: OFF (Apagado), ROOM (Ambiente), FLOR (Piso), OUT (Exterior)
Predeterminado: OFF (Apagado)
SENSOR 2Seleccione el tipo de sensor conectado a la entrada número 2 para sensor auxiliares.
Rango: OFF (Apagado), ROOM (Ambiente), FLOR (Piso),
Predeterminado: OFF (Apagado)
SENSOR AMBIENTEPrenda o apague el sensor integrado de la temperatura del aire en el ambiente.
Rango: OFF (Apagado) o ON (Encendido)
Predeterminado: ON (Encendido)
TIPO DE TERMINAL W1Seleccione el tipo de terminal de la primera etapa de calefacción W1.
Rango: CTRL, HRF1, HRF2, CONV, COIL, OTHR
Predeterminado: CTRL
Ajustes del menú de instalaciónBOMBA W1Seleccione si la bomba del sistema de caldera o una bomba de sistema mixto en un control de sistema tekmarNet® se accionará mientras se encuentre en funcionamiento la primera etapa de calentamiento W1.
Rango: OFF (Apagado) o ON (Encendido)
Predeterminado: ON (Encendido)
MOTOR TÉRMICO W1Seleccione si la primera etapa W1 de calentamiento opera una válvula térmica de zona (actuador de cera). Cuando se encuentra en ON (encendido), hay un retraso de 3 minutos antes de accionar la bomba o cualquier tipo de fuente de calefacción.
Rango: OFF (Apagado) o ON (Encendido)
Predeterminado: OFF (Apagado)
CICLOS W POR HORASeleccione el número de ciclos de calentamiento por hora.Solamente disponible cuando el termostato no se encuentra conectado a un control de sistema tekmarNet®.
Rango: SYNC (Sincronizar), AUTO, 2 a 12
Predeterminado: SYNC (Sincronizar)
Para una lista completa de ajustes y detalles funcionales, por favor diríjase al Manual de instalación y manejo del termostato (552_D) incluido en los controles compatibles tekmarNet® o descargue el folleto informativo en www.tekmarcontrols.com