quickmanual hps-01 eng rev.1.0 181205 사본poe switch or injector. 2 1 product image connect utp...
TRANSCRIPT
1) This device is designed for indoor use only.
2) Do not use this device for other purpose.
3) Do not subject the product to physical shocks.
4) Do not disassemble the product or insert foreign object.
Precautions for use
HPS-01 Installation Guide
Features
Applications
1) 1 input 2 output design (Possible to connect 2 network devices using 1 cable)
2) Extended Ethernet transmission distance up to 250m
(When configured with the Hybrid PoE Switch Series)
3) PoE, PoE+, Extra PoE (Max. 60W output)
4) Over current protection for secured power supply
5) NMS (Network Management System) by IP address
Connection Status monitoring / Transmission Bandwidth per port monitoring /
Reset per each port / Event & Alarm / e-MAP
6) Plug & Play
Overview
The HPS-01 is a 2Port Hybrid PoE Switch that transmits network signal and PoE+ power up
to 250 meters between the devices.
1 input 2 output design makes easy to install 2 network devices into a single LAN cable and
possible to connect multiple devices in a cascade configuration.
Please read the installation guide carefully before product installation.
Caution
1) Please install the device following the installation guide.
2) Do not touch the device and cable with wet hands.
3) Keep away from moisture and shock.
4) Do not install the device near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
5) If the device is defective or malfunctioning, please unplug the power immediately and
contact to dealer or service senter.
Precautions for Installation
Max. 250m
Cat.5e or Better
Max. 130m
Max. 100m
Max. 100m
Max. 130m
NVR PoE Switch
Computer(NMS)
56V DC/1.2A Power Supply(optional)
HPS-01 HPS-01
HPS-01
Installation Guide
Specification
Warranty
HPS-01 is powered by power supply or PSE (Power Sourcing Equipment) such as
PoE Switch or Injector.
2
Product Image1
Connect UTP cable from PSE to "PoE IN" port.
Data/PoE LED indicates working status.
3
4
5
Model
Cat5e or Better
DC 56V
IEEE 802.3at/af
10/100Mbps
250m(100Mbps) / supports distance extension by applying
additional power supply on the device newly installed.
Green: Data link / Amber: PoE
Working Temp.: 0 ~ 60°C / Storage Temp. : -20 ~ 80°C
Max. 95%
118g
80.4x61.6x24(mm)
HPS-01
RJ45
UTP
Power Input
PoE
Bandwidth
Trans. Distance
LED Indication
Temperature /
Humidity
Weight
Dimension
Data & PowerInput/Output
PoE IN
PoE
OUT
This device has passed the quality control and product inspection.
Please install and use according to the installation guide.
The warranty period for this product is 24 months from the date of puchase.
Any damages or breakage from user’s abuse, accident, modification
or natural disasters will not be covered manufacturer’s warranty
Please visit below website for more detailed information.
Manufacturer : INTERCOAX CO.,LTD
TEL : 031-365-3133
FAX : 031-365-3135
E-mail : [email protected]
www.intercoax.com
Bracket
56VDC
PWR/RUN
DATA PoE
Up Link
DATA
Po
rt 1
PoE DATA PoE
Bracket
Po
rt 2
Connect power supply (48VDC~57VDC)in case the device cannot be powered by PoE Switch or
PoE Injector. Also, power supply is applicable if the PoE power is not sufficient for end-device
operating and if multiple devices are connected in a cascade configuration. When the power
supply connected to the device, PoE input function is automatically stopped.
Connect UTP cable from Camera to "PoE OUT" port and Data/PoE LED indicates working status.
Also, applying additional HPS-01s on the one of "PoE OUT" port , it is possible to connect
multiple network devices in a cascade configuration.