quickship price list - escnj.us...penco will assign the order to the most economical shipping point....

QuickShip Price ListEffective November 1, 2016

Clipper® Shelving RivetRite® Shelving(Steel framework only)

Vanguard™ Lockers and Accessories

pencoproducts.com

Benches & Pedestals

QuickShip products ship in 5 working days or less from Penco Distribution Centers located across the U.S.

• Salt Lake City, UT 84088

• Memphis, TN 38118

• Fort Wayne, IN 46818

• Philadelphia, PA 19020

pencoproducts.com/quickship

Product availability by location is listed on back.

Fillers and Slope Hoods & Ends

QuickShip Ordering/General Information

Copyright 2016, Penco Products, Inc. Clipper®, Hi-Performance® and RivetRite® are Trademarks of Penco Products, Inc.

The goal of the QuickShip Program is to schedule and ship all orders from Penco Distribution Centers in 5 working days or less. For requirements less than five days, please contact customer service.

Locker Assembly: QuickShip Locker Assembly by Penco is $15 Net per frame for 1, 2, & 3 Tier, $18 Net per frame for 5 & 6 Tier, $18 Net for Wall Mount and $54 Net for 16 Person lockers.

PROGRAM GUIDELINES• The standard lead time for assembled lockers is 5

working days for orders up to 50 frames. For the lead time on more than 50 assembled frames, please con-tact customer service.

• Maximum QuickShip order size is 100 frames of lock-ers, with or without legs. Orders in excess of this quan-tity will be processed as production orders.

• The lead time for knocked-down lockers without legs is 5 working days up to 50 frames. Please contact cus-tomer service for lead time for more than 50 frames.

• Maximum QuickShip order size is $10,000 net for clip-per shelving, and $5,000 net for rivet shelving. Please check with customer service for availability and lead time on orders greater than these limits.

QuickShip Products: All shipments will be made pre-pay and add unless otherwise specified. When freight is prepaid, charges will be added to the invoice. If you put a non-QuickShip part number on an order, the entire order will be given a “standard” ship date based on the lead times shown on our website (not 5 working days). If you put a QuickShip part number on a NON-QuickShip order, it will do nothing to improve the lead time, and the order will be given a “standard” date.

Mark Your Orders: All QuickShip Orders must be clearly marked. If your order is not recognized as “QuickShip” upon receipt at Penco, it will be delayed.

Changes and Cancellations: Changes and cancellations are not available after placement of a QuickShip order.

Shipping: All shipments will be made pre-pay and add unless otherwise specified. When freight is prepaid, charges will be added to the invoice. Each order must be for one destination to one consignee. Pick-ups are available by privately owned vehicles, with prior authorization. Orders cannot be held for accumulation to ship with other orders, nor can they be put on “hold” status for shipment at a later date.

Claims and Freight Damage: For Prepay and add shipments only, claims for damaged or lost material must be reported to Penco Corporate headquarters within 72 hours from receipt of shipment. CAUTION: When you give the delivering carrier a clear receipt for a shipment in which there is damaged merchandise or a shortage, the carrier is relieved of further responsibility. Penco will not accept claims unless the delivery receipt is noted as damaged. All Third-Party claims must be filed with the delivering carrier.

Material Availability: If we are UNABLE to ship KD material in 5 working days due to availability of stock, Penco Customer Service will call you to advise the schedule date, and give you the opportunity to cancel without penalty.

Return Shipments: No return shipments will be accepted without previous written factory authorization. Material returned without authorization will be refused. A restocking charge of 25% or more with a minimum of $50.00 net will be levied on all authorized returned material, subject to inspection for damage at the factory. No credit will be issued for damaged material. All return freight charges must be prepaid.

Guarantee: We guarantee our products for a one year limited warranty to be free from mechanical and manufacturing defects. Penco is not responsible for products damaged by misuse, abuse or any acts of vandalism. The guarantee is also voided if the standard finish is exposed to items such as high humidity, chlorine salts, abrasive cleaners, germicidal cleaners or acids.

Specifications: (Subject to change without notice) Refer to current Penco catalogs or website for descriptions and specifications.

Locker Information: Lockers will be provided with number plates in the hardware from 1-up when a numbering preference is not specified on the order. Numbers from 1 to 300 are available from QuickShip stock. QuickShip lockers are furnished with flat tops and 6" legs as standard. Legs will be removed by Penco at no additional charge if "NO LEGS" is requested on the order. KD Locker orders for 3 frames or less will be individually packed; orders for 4 or more frames will be bulk packed (like parts packed together).

Anchoring: For safety purposes, all lockers whould be floor and wall anchored. Even when properly anchored, lockers are NOT designed to withstand stepping on bottoms or swinging on doors. PENCO ASSUMES NO RESPONSIBILITY FOR PRODUCT FAILURE OR PERSONAL INJURY IF PRODUCTS ARE MODIFIED OR USED FOR OTHER THAN THEIR DESIGNED PURPOSE.

Locker Accessories: These will be shipped in separate cartons with the following exceptions: Slope Top Kits and Front Bases will be attached to lockers by Penco at no additional charge when ordered with assembled lockers.

Weight: Weights shown are approximate for average packing per average order.

QuickShip Warehouse Freight ClassesFreight Class Product Line

70 K.D. Lockers & AccessoriesRivetRite & Clipper Shelving

85 Bench Pedestals

125-150 Assembled Lockers

All prices are based on Penco standard construction. Order by indicating quantity and catalog number.All orders are subject to final acceptance at the main office.

Prices are F. O. B. shipping point and subject to change without notice.Penco will assign the order to the most economical shipping point.

Prices are in U.S. Dollars at time of shipment.

2 Penco QuickShip

Penco Products, Inc. · 1820 Stonehenge Drive · Greenville, NC 27858 · 800-562-1000 · www.pencoproducts.com

3

W D H Cat. No. Price Per Wt. Pkg.

Penco QuickShip


Open Clipper Basic UnitsHeavy Duty Hi-Performance Shelves

5 Shelves 36 12 87 1H7015028 217.20 Ea. 62.0 PPO 36 18 87 1H7025028 250.70 Ea. 73.4 PPO 36 24 87 1H7035028 282.85 Ea. 84.3 PPO 48 12 87 1H7075028 260.25 Ea. 73.6 PPO 48 18 87 1H7085028 327.50 Ea. 88.0 PPO

48 24 87 1H7095028 379.40 Ea. 102.3 PPO


48 24 87 1H7096028 437.30 Ea. 116.9 PPO


48 24 87 1H7097028 495.20 Ea. 131.5 PPO


48 24 87 1H7098028 553.10 Ea. 143.2 PPO

Open Clipper End Kits To End Row of Open ShelvingConsists of front Box Post and 1 pair of Side Sway Braces.

12 87 101287028 38.85 Ea. 10.1 PPO 18 87 101887028 39.85 Ea. 10.5 PPO 24 87 102487028 41.50 Ea. 10.9 PPO

Closed Clipper Basic UnitsHeavy Duty Hi-Performance Shelves


48 24 87 1H8095028 529.25 Ea. 138.2 PPO


48 24 87 1H8096028 587.15 Ea. 152.9 PPO


48 24 87 1H8097028 645.05 Ea. 167.5 PPO


48 24 87 1H8098028 702.95 Ea. 182.1 PPO

Closed Clipper End Kits To End Row of Closed ShelvingConsists of front Box Post and Side Panel.

12 87 1C1287028 55.80 Ea. 14.1 PPO 18 87 1C1887028 67.30 Ea. 17.5 PPO 24 87 1C2487028 78.85 Ea. 21.0 PPO

OPEN & CLOSED Clipper® Heavy Duty Shelving UNITS - 028 Gray

All Shelving parts are painted 028 Gray with powder coat enamel.

Use a Closed Clipper Basic Unit to start a single unit or a row of shelving. Add additional Clipper Basic Units to add to a row. To end a row or single unit, finish the unit with a Closed End Kit.

Closed Basic Clipper Unit

1 front Box Post-14 Ga.,2 rear Offset Angle

Posts-14 Ga.,1 Side & 1 Back Panel,

Heavy Duty Hi-Performance®

Shelves

Closed Clipper End KitUsed to end single units or

a row of Heavy DutyClosed Clipper Units

1 Front Box Post-14 Ga.,1 Side Panel

(Order End Kits in the appropriate depth)

Color: 028 Gray

Front bases must be ordered separately.

Use an Open Clipper Basic Unit to start a single unit or a row of shelving. Add additional Clipper Basic Units to add to a row. To end a row or single unit, finish the unit with an Open End Kit.

Open Basic Clipper Unit

1 Front Box Post-14 Ga.,2 Rear Offset Angle

Posts-14 Ga.,1 Side & 1 Back Sway

Brace,Heavy Duty

Hi-Performance® Shelves

Open Clipper End KitUsed to end single units or a row of Heavy Duty

Open Clipper Units

1 Front Box Post-14 Ga.,1 pair of Side Sway

Braces

(Order End Kits in the appropriate depth)

Color: 028 Gray

NOTE: Many additional size combinations are are available outside the QuickShip program.

4


Penco QuickShip


Box Posts 14 Gauge 87 1B4087028 31.65 Ea. 9.1 10

Offset Angle Posts 14 Gauge 87 1A4087028 16.85 Ea. 6.1 12

Floor Anchor Clip Anchor holes are 7/16" diameter. 3-1/2 2-7/8 10006Z 3.00 Ea. 0.4 PPO

Concrete Floor AnchorUse the longer anchor # 9281 in seismic zones above 2A.

3/8 2-1/4 9280 1.75 Ea. 0.1 PPO

Back Sway Braces (Pair) For Open ShelvingOne pair forms a set which bolts to the short leg of the rear Offset Angle Posts for lateral stability. Can be used in common between back-to-back units. Dimension shown is shelf width.

36 12036H028 12.65 Pr. 3.2 PPO 48 12048H028 14.70 Pr. 3.8 PPO

Side Sway Braces (Pair) One pair forms a set which bolts to the front and rear posts for stability. Can be used in common between adjoining units. Dimension shown is shelf depth.

12 12015S028 7.20 Pr. 1.0 PPO 18 12026S028 8.20 Pr. 1.4 PPO

24 12034S028 9.85 Pr. 1.8 PPO

Back Panels For Closed ShelvingPunched on 1" centers at vertical edges and center for attaching to posts & shelves. Includes back clip and hardware. 48" wide backs are furnished in 2 pieces (51" & 39" high).

36 87 12540H028 84.70 Ea. 20.9 PPO 48 87 12740H028 127.20 Ea. 28.2 PPO

Side Panels 12 87 11440H028 24.15 Ea. 5.0 PPO 18 87 11640H028 35.65 Ea. 8.4 PPO 24 87 11740H028 47.20 Ea. 11.9 PPO

Front Base Strips Fastens directly to the bottom shelf front to close the gap beneath it and the floor. Normally used with closed shelv-ing. Includes hardware.

36 3 14520H028 8.50 Ea. 1.6 PPO 48 3 14540H028 10.35 Ea. 2.0 PPO

Clipper Shelves, with 4 ClipsHeavy Duty Class '1' Shelves are included with Basic Units and can be purchased as extra shelves as compo-nent parts. See 'SHELF CAPACITIES' below: Select the proper shelf type for the expected maximum load.

Hi-Performance Heavy Duty, Class 1 36 12 1H203612028 26.40 Ea. 7.3 10 36 18 1H203618028 32.90 Ea. 9.5 10 36 24 1H203624028 39.00 Ea. 11.6 10

48 12 1H204812028 34.60 Ea. 9.4 10 48 18 1H204818028 47.85 Ea. 12.2 6

48 24 1H204824028 57.90 Ea. 15.0 6

Clipper Shelving Components & Accessories - 028 Gray

Shelf Capacities

36" w x 12" d 800 lbs.*

36" w x 18" d 850 lbs.*

36" w x 24" d 800 lbs.*

48" w x 12" d 500 lbs.*

48" w x 18" d 500 lbs.*

48" w x 24" d 500 lbs.*

* Evenly Distributed Loads for Clipper Hi-Performance Heavy Duty Class 1 Shelves.

5


Penco QuickShip


Double Rivet Units (w/o Center Support) 4 Shelf Starter Unit, 48" Wide 48 18 84 46001HP 180.00 Unit 59.2 48 24 84 46002HP 184.80 Unit 62.4 48 30 84 46003HP 190.40 Unit 65.6 48 36 84 46004HP 201.20 Unit 68.0 48 48 84 46005HP 219.60 Unit 80.0

4 Shelf Starter Unit, 60" Wide 60 18 84 46011HP 194.00 Unit 66.4 60 24 84 46012HP 198.80 Unit 69.6 60 30 84 46013HP 204.40 Unit 72.8 60 36 84 46014HP 215.20 Unit 75.2 60 48 84 46015HP 233.60 Unit 87.2

4 Shelf Starter Unit, 72" Wide 72 18 84 46021HP 211.60 Unit 74.4 72 24 84 46022HP 216.40 Unit 77.6 72 30 84 46023HP 222.00 Unit 80.8 72 36 84 46024HP 232.80 Unit 83.2 72 48 84 46025HP 251.20 Unit 95.2

4 Shelf Add-On Unit, 48" Wide 48 18 84 46006HP 172.30 Unit 57.2 48 24 84 46007HP 177.10 Unit 60.4 48 30 84 46008HP 182.70 Unit 63.6 48 36 84 46009HP 193.50 Unit 66.0 48 48 84 46010HP 211.90 Unit 78.0



5 Shelf Starter Unit, 72" Wide 72 30 120 46041HP 287.20 Unit 104.2 72 36 120 46042HP 300.70 Unit 107.2 72 48 120 46043HP 323.70 Unit 122.2

5 Shelf Add-On Unit, 72" Wide 72 30 120 46044HP 274.10 Unit 101.6 72 36 120 46045HP 287.60 Unit 104.6 72 48 120 46046HP 310.60 Unit 119.6

RivetRite® Shelving - Double Rivet Units - 723 Light Putty

RivetRite Shelving - General Information• 48" to 96" wide beams• Access to stored items from all sides• Choice of Double Rivet or Single Rivet beam construction to meet your storage requirements• Easy assembly without special tools• Units available in 84" and 120" heights• 723 Light Putty Powdercoat finish

Penco RivetRite shelving is designed to provide an economical solution for the storage of retail, wholesale or industrial goods. Installation can be done without special tools in a minimum amount of time. All steel parts in the QuickShip program are finished in attractive 723 Light Putty baked enamel.

Starter and add-on units are combined to form economical rows of shelving. Each add-on unit includes a pair of tee posts which are used in common between units. This reduces assembly time and the number of parts required. Begin each row with two angle posts from the starter unit and join the desired number of add-on units to complete the row. Finish the last unit with a pair of angle posts from the starter unit. Example: One starter and two add-ons.

ALL units must have a full perimeter of double rivet beams at the top and bottom to insure a stable and rigid unit.

Shelf deck material is not available in the QuickShip program. It must be obtained outside the QuickShip program or purchased locally (particleboard supplied by Penco on a production basis is classified as '1-M-1 Interior Grade').

If you are cutting your own board, use the nominal shelf deck size and cut +0" -1 /8".

Starter Unit Add-On Unit

Double Rivet Units without Center Supports Consist of:

Starter Units4 Standard Angle Posts 2 Double Rivet Angle Beams left to right per shelf level2 Double Rivet Angle Beams front to back per shelf level

Add-On Units2 Standard Tee Posts2 Double Rivet Angle Beams left to right per shelf level2 Double Rivet Angle Beams front to back per shelf level

Color: 723 Light Putty

Shelf deck material MUST be obtained separately - It is not available in the QuickShip program.

NOTES• Double Rivet Beams 48" or longer in these units are Heavy Duty, all others are Standard Beams.• All Unit Catalog Numbers are for Steel Framing only. • Shelf deck material must be obtained separately.

6


Penco QuickShip


Double Rivet Units (w/Center Support) 4 Shelf Starter Unit, 48" Wide 48 18 84 46W01HP 206.80 Unit 64.8 48 24 84 46W02HP 215.60 Unit 69.6 48 30 84 46W03HP 224.80 Unit 74.4 48 36 84 46W04HP 238.40 Unit 78.8 48 48 84 46W05HP 268.40 Unit 94.0

4 Shelf Starter Unit, 60" Wide 60 18 84 46W11HP 220.80 Unit 72.0 60 24 84 46W12HP 229.60 Unit 76.8 60 30 84 46W13HP 238.80 Unit 81.6 60 36 84 46W14HP 252.40 Unit 86.0 60 48 84 46W15HP 282.40 Unit 101.2



4 Shelf Add-On Unit, 48" Wide 48 18 84 46W06HP 199.10 Unit 62.8 48 24 84 46W07HP 207.90 Unit 67.6 48 30 84 46W08HP 217.10 Unit 72.4 48 36 84 46W09HP 230.70 Unit 76.8 48 48 84 46W10HP 260.70 Unit 92.0




5 Shelf Starter Unit, 72" Wide 72 30 120 46W41HP 330.20 Unit 115.2 72 36 120 46W42HP 347.20 Unit 120.7 72 48 120 46W43HP 384.70 Unit 139.7

5 Shelf Starter Unit, 96" Wide 96 30 120 46W47HP 417.20 Unit 144.2

96 36 120 46W48HP 437.70 Unit 152.2 96 48 120 46W49HP 489.70 Unit 175.2

5 Shelf Add-On Unit, 72" Wide 72 30 120 46W44HP 317.10 Unit 112.6 72 36 120 46W45HP 334.10 Unit 118.1 72 48 120 46W46HP 371.60 Unit 137.1

5 Shelf Add-On Unit, 96" Wide 96 30 120 46W50HP 404.10 Unit 141.6

96 36 120 46W51HP 424.60 Unit 149.6 96 48 120 46W52HP 476.60 Unit 172.6

RivetRite® Shelving - Double Rivet Units - 723 Light Putty

Double Rivet Units with Center Supports Consist of:

Starter Units4 Standard Angle Posts 2 Double Rivet Angle Beams left to right per shelf level2 Double Rivet Angle Beams front to back per shelf level1 Center Support per shelf level except for 96" wide units which have 2 per level.

Add-On Units2 Standard Tee Posts2 Double Rivet Angle Beams left to right per shelf level2 Double Rivet Angle Beams front to back per shelf level1 Center Support per shelf level except for 96" wide units which have 2 per level.

All double rivet beam units must have a full perimeter of beams at every level.

ALL units must have a full perimeter of double rivet beams at the top and bottom to insure a stable and rigid unit.



7


Penco QuickShip


Single Rivet Shelving Units 5 Shelf Starter Unit 36 12 84 461315P 142.10 Unit 42.4 36 18 84 461325P 147.30 Unit 44.6 36 24 84 461335P 150.40 Unit 46.6 36 36 84 461345P 181.00 Unit 56.8

48 12 84 461415P 155.20 Unit 51.4 48 18 84 461425P 157.20 Unit 52.0 48 24 84 461435P 163.50 Unit 55.6 48 36 84 461445P 194.10 Unit 65.8

5 Shelf Add-On Unit 36 12 84 462355P 134.40 Unit 40.4 36 18 84 462365P 139.60 Unit 42.6 36 24 84 462375P 142.70 Unit 44.6 36 36 84 462385P 173.30 Unit 54.8


6 Shelf Starter Unit 36 12 84 461316P 152.00 Unit 45.6 36 18 84 461326P 157.20 Unit 47.8 36 24 84 461336P 160.30 Unit 49.8 36 36 84 461346P 200.80 Unit 63.2












RivetRite® Shelving - Single Rivet Units - 723 Light Putty

Single Rivet Units Consist of:

Starter Units4 Standard Angle Posts 4 Double Rivet Angle Beams left to right 4 Double Rivet Angle Beams front to backThe appropriate number of Single Rivet Shelf Beams left to right.2 Single Rivet Shelf Beams front to back up to 24" deep;36" Deep - Single Rivet Shelf Beams front to back at every shelf level

Add-On Units2 Standard Tee Posts4 Double Rivet Angle Beams left to right2 Double Rivet Angle Beams front to back, except 36" deep unit has 4. The appropriate number of Single Rivet Shelf Beams left to right.1 Single Rivet Shelf Beam front to back except for 36" deep which has 2 per shelf level.

All units must have a full perimeter of double rivet beams at the top and bottom to insure a stable and rigid unit.



8


Penco QuickShip


Record Storage Shelving UnitsObtain Deck Material Separately.

For Use With DeckingStarter Units

42 15 84 46601AP 165.20 Unit 48.8 42 30 84 46602AP 178.40 Unit 56.8

69 15 84 46603AP 203.60 Unit 70.4 69 30 84 46604AP 251.20 Unit 87.2

Obtain Deck Material Separately.

Add-On Units

42 15 84 46613AP 157.50 Unit 46.8 42 30 84 46614AP 170.70 Unit 54.8

69 15 84 46615AP 195.90 Unit 68.4 69 30 84 46616AP 243.50 Unit 85.2

Angle Posts (Punched on 1-1/2" centers) Standard, 1-1/2" x 1-1/2" 72 46AS06P 12.85 Ea. 4.1 84 46AS07P 15.10 Ea. 4.8 96 46AS08P 17.00 Ea. 5.5 120 46AS10P 21.30 Ea. 6.8

Tee Posts (Punched on 1-1/2" centers) Standard, 3" x 1-1/2" 72 46TS06P 22.85 Ea. 7.4 84 46TS07P 26.35 Ea. 8.6 96 46TS08P 29.70 Ea. 9.9 120 46TS10P 36.05 Ea. 12.3

Single Rivet Shelf BeamsFor use as left to right and front to back shelf support. See Beam Load Table in Ill. Price Boo for capacity. NOTE: DO NOT MIX STANDARD AND HEAVY DUTY SINGLE RIVET BEAMS ON THE SAME LEVEL.

Standard 12 1 46SS12P 2.30 Ea. 0.6 18 1 46SS18P 3.30 Ea. 0.9

24 1 46SS24P 3.65 Ea. 1.1 30 1 46SS30P 4.20 Ea. 1.3

36 1 46SS36P 4.95 Ea. 1.6 42 1 46SS42P 5.35 Ea. 1.9 48 1 46SS48P 5.60 Ea. 2.1

Heavy Duty 48 1-1/4 46HS48P 8.95 Ea. 4.2

Double Rivet Angle Beams2-3/4" h. x 1" d. - For left to right and front to back shelf support.

Standard 12 46SB12P 4.20 Ea. 0.8 15 46SB15P 4.65 Ea. 1.0 18 46SB18P 5.00 Ea. 1.2

24 46SB24P 5.60 Ea. 1.6 30 46SB30P 6.30 Ea. 2.0

36 46SB36P 7.65 Ea. 2.3 42 46SB42P 8.45 Ea. 2.7

Heavy Duty 48 46HB48P 9.95 Ea. 3.8 60 46HB60P 11.70 Ea. 4.7

69 46HB69P 13.25 Ea. 5.4

72 46HB72P 13.90 Ea. 5.7 84 46HB84P 15.95 Ea. 6.6 96 46HB96P 18.30 Ea. 7.5

RivetRite Components & Parts

RivetRite® Shelving & Components - 723 Light Putty

Record Storage Units For Use With Decking Consist of:

Starter Units4 Standard Angle Posts 2 Double Rivet Angle Beams left to right per shelf level2 Double Rivet Angle Beams front to back per shelf level1 Center Support per shelf level for 69" w. x 30" d. only.

Add-On Units2 Standard Tee Posts 2 Double Rivet Angle Beams left to right per shelf level2 Double Rivet Angle Beams front to back per shelf level1 Center Support per shelf level for 69" w. x 30" d. only.

All double rivet beam units must have a full perimeter of beams at every level.


Shelf deck material MUST be obtained separately - It is not available in the

QuickShip program.

NOTE: Standard Duty RivetRite Angle and Tee Posts are not recommended for use in high rise or multiple-level storage structures. For these applications, Heavy Duty RivetRite posts should be used. Contact your Penco representative for more information.

9


Penco QuickShip


Double Rivet Zee Step Beams2-1/4" x 1" d. - For left to right and front to back shelf sup-port. Lower profile than other double rivet beams allows more useable space between shelf levels.

ZB Style Beam 12 46ZB12P 4.05 Ea. 0.9 18 46ZB18P 5.45 Ea. 1.3 24 46ZB24P 6.65 Ea. 1.8

36 46ZB36P 9.05 Ea. 2.7 42 46ZB42P 10.20 Ea. 3.1 48 46ZB48P 11.30 Ea. 3.5

Center Supports2-3/4" h. - Bolts to double rivet or channel beams to add support to decking and stabilize beams. Supplied with bolts and wing nuts for fast assembly. Use 1 per pair of beams under 96"; 2 per pair of 96" beams.

15 46CS15P 6.25 Ea. 1.2 18 46CS18P 6.70 Ea. 1.4

24 46CS24P 7.70 Ea. 1.8 30 46CS30P 8.60 Ea. 2.2

36 46CS36P 9.30 Ea. 2.7 48 46CS48P 12.20 Ea. 3.5

Foot PlateFor use in anchoring angle and tee posts to the floor. Hardware included for attaching to posts. Floor anchor holes are 1/2" diameter. Hardware to anchor to the floor not included - see No. 9280, Concrete Floor Anchor in Wide Span Section.

4 46FP0H 3.50 Ea. 0.5

Concrete Floor Anchor 3/8" x 2-1/4" 3/8 2-1/4 9280 1.75 Ea. 0.1 PPO

Tie PlateUsed to join Angle Post units side by side to insure proper row alignment.

3 3 46TP00P 1.45 Ea. 0.2

Replacement HardwareFour Wing Nuts and Four 10-24 x 5/8" TR HD Machine Screws required per Center Support.Wing Nut For Center Support

8860 0.20 Ea. 0.1

TR HD Machine Screw, 10-24 x 5/8" 8704 0.10 Ea. 0.1

RivetRite® Components - 723 Light Putty / Intro to Lockers

LOCKER ASSEMBLY • QuickShip Locker Assembly by Penco is $15 Net per frame for 1, 2, & 3 Tier, $18 Net per frame for 5

& 6 Tier, $18 Net for Wall Mount and $54 Net for 16 Person lockers.• You must specify on the order that you want the lockers assembled.• When requesting assembly of exposed ends it must be clearly noted and the appropriate group-

ing must be identified.

To order assembled lockers, add an "A" suffix to the locker catalog number. This changes the lead time to 5 work days.

Lockers are assembled in 1, 2 or 3-wide groups only. Assembly for accessories is not available except for Slope Top Kits & Front Bases.

General QuickShip LOCKER InformationLOCKER ORDER INFORMATION

The shaded area in the locker illustrations indicates pricing unit. 2 & 3-wide lockers must be ordered in multiples of 2 or 3, but are priced by the frame. Example: For a row of ten lockers, Order nine 3-wide lockers and one 1-wide locker.

LOCKER HEIGHTHeight refers to the nominal height of the tier. Example: 5 tier locker with a (tier) height of 12” with 6” legs

5 tiers x 12” tier height = 60" + 6” legs = 66” total height with legs.(QuickShip Lockers have 6” legs as standard, but they can be supplied without legs if specified on the order.)

For safety purposes, all lockers should be floor and wall anchored. Even when properly anchored, lockers are NOT designed to withstand stepping on bottoms or swinging on doors. PENCO ASSUMES NO RESPONSIBILITY FOR PRODUCT FAILURE OR PERSONAL INJURY IF PRODUCTS ARE MODIFIED OR USED FOR OTHER THAN THEIR DESIGNED PURPOSE.

10


Penco QuickShip


Vanguard Recessed Handle Lockers 1 Tier, 1 Wide028 Gray

12 12 60 68001R028 249.05 Frm. 50.0 12 15 60 68011R028 259.15 Frm. 52.0 12 18 60 68021R028 273.25 Frm. 57.0

12 12 72 68051R028 272.30 Frm. 57.0 12 15 72 68061R028 281.70 Frm. 65.0 12 18 72 68071R028 296.80 Frm. 69.0

15 18 72 68091R028 321.95 Frm. 71.0

18 18 72 68101R028 343.45 Frm. 83.0

1 Tier, 2 Wide 12 12 60 68002R028 228.30 Frm. 48.4 12 15 60 68012R028 237.55 Frm. 49.5 12 18 60 68022R028 250.45 Frm. 51.7

12 12 72 68052R028 249.60 Frm. 53.9 12 15 72 68062R028 258.25 Frm. 56.1

12 18 72 68072R028 272.10 Frm. 60.5

15 18 72 68092R028 295.15 Frm. 71.5

18 18 72 68102R028 314.80 Frm. 80.3


12 12 72 68053R028 226.90 Frm. 49.0 12 15 72 68063R028 234.75 Frm. 51.0

12 18 72 68073R028 247.35 Frm. 55.0

15 18 72 68093R028 268.30 Frm. 65.0

18 18 72 68103R028 286.20 Frm. 73.0

2 Tier, 1 Wide 12 12 30 68111R028 317.15 Frm. 52.0

12 12 36 68121R028 332.75 Frm. 56.0 12 15 36 68131R028 346.90 Frm. 62.0 12 18 36 68141R028 360.00 Frm. 66.0

15 18 36 68261R028 386.50 Frm. 76.0

2 Tier, 2 Wide 12 12 30 68112R028 290.75 Frm. 49.5

12 12 36 68122R028 305.05 Frm. 55.0 12 15 36 68132R028 318.00 Frm. 57.2 12 18 36 68142R028 330.00 Frm. 61.6

15 18 36 68262R028 354.30 Frm. 74.8

2 Tier, 3 Wide 12 12 30 68113R028 264.30 Frm. 45.0

12 12 36 68123R028 277.30 Frm. 50.0 12 15 36 68133R028 289.10 Frm. 52.0 12 18 36 68143R028 300.00 Frm. 56.0

15 18 36 68263R028 322.10 Frm. 68.0




Vanguard Box Lockers 5 Tier Box Locker, 1 Wide 12 12 12 68161X028 323.95 Frm. 50.0 12 15 12 68171X028 329.00 Frm. 55.0

5 Tier Box Locker, 2 Wide 12 12 12 68162X028 296.95 Frm. 48.0 12 15 12 68172X028 301.55 Frm. 53.0


6 Tier Box Locker, 1 Wide 12 12 12 68191X028 378.25 Frm. 60.0 12 15 12 68201X028 388.60 Frm. 66.0 12 18 12 68211X028 408.80 Frm. 72.0



Vanguard 16 Person Locker Assembled units shipped in 3 pieces. 69 18 72 68231X028 1107.25 Unit 180.0

Vanguard Lockers - 028 Gray

11


Penco QuickShip


Vanguard Unit Packaged Wall Mount Height is body height. One frame of four 12" x 18" x 12" openings w/ coat rack. Flat top, no legs only. Ships in 2 cartons. 45 18 13-5/8 68242X028 450.15 Unit 43.0

Slope Top Kits, Individual - 028 Gray To Convert Flat Tops to Indiv. Slope Tops1 WideDesigned to convert a 1-wide flat top locker into a slope top locker. Kit contains 1 top, 1 back, 2 ends.

12 12 4 60229H028 21.10 Kit 2.5 12 15 5 60231H028 23.65 Kit 2.9

12 18 6 60233H028 26.90 Kit 3.5

15 18 6 60239H028 32.20 Kit 4.0

18 18 6 60243H028 36.30 Kit 5.0

3 WideDesigned to convert a 3-wide flat top package locker group into slope top lockers. Kit contains 3 tops, 3 backs, 4 ends.

12 12 4 60230H028 57.65 Kit 7.0 LPP 12 15 5 60232H028 64.25 Kit 8.0 LPP

12 18 6 60234H028 73.30 Kit 9.0 LPP

15 18 6 60240H028 88.20 Kit 11.0 LPP

18 18 6 60244H028 98.95 Kit 14.0 LPP

Front Bases - 028 Gray 18 Gauge.

12 6 60217-028 10.30 Ea. 1.0 LPP 15 6 60218-028 11.10 Ea. 2.0 LPP 18 6 60219-028 12.55 Ea. 2.0 LPP

End Bases - 028 Gray Single Row 12 6 60204-028 15.35 Ea. 1.0 LPP 15 6 60205-028 15.40 Ea. 2.0 LPP 18 6 60206-028 17.15 Ea. 2.0 LPP

Fillers, Standard Vertical Angle - 028 Gray 12 60 66113-028 46.00 Ea. 9.0 LPP 12 66 661221-028 46.75 Ea. 9.5 LPP 12 72 661141-028 50.95 Ea. 10.0 LPP 12 78 66116-028 53.35 Ea. 11.0 LPP

Wall Angle (Slip Joint) - 028 Gray 60 66118-028 27.70 Ea. 3.5 LPP 66 66120-028 31.30 Ea. 3.8 LPP 72 66119-028 34.15 Ea. 4.1 LPP 78 66121-028 43.90 Ea. 4.6 LPP

Flat Top Fillers - 028 GrayOverlaps standard tops

15 12 661321C028 18.35 Ea. 2.0 LPP 15 15 661322C028 20.35 Ea. 3.0 LPP 15 18 661323C028 23.90 Ea. 4.0 LPP

Flat Top Corner Fillers - 028 Gray 12 12 66138-028 18.35 Ea. 2.0 LPP 15 15 66139-028 20.45 Ea. 3.0 LPP 18 18 66140-028 28.90 Ea. 4.0 LPP

Slope Top Fillers - 028 Gray 15 12 661371-028 19.10 Ea. 2.0 LPP 15 15 661372-028 21.40 Ea. 3.0 LPP 15 18 661373-028 24.70 Ea. 4.0 LPP

Slope Top Corner Fillers - 028 Gray 12 12 66100-028 116.30 Ea. 3.0 LPP 15 15 66101-028 118.50 Ea. 4.0 LPP 18 18 66102-028 121.90 Ea. 6.0 LPP

Slope Hood - 028 Gray18 gauge, available in 72" length only 72 12 5 66144H028 108.20 Ea. 17.2 LPP 72 15 6 66147H028 123.50 Ea. 20.2 LPP 72 18 7 66150H028 136.75 Ea. 23.2 LPP

Hood Splice - 028 Gray 12 66168-028 17.30 Ea. 0.5 LPP 15 66169-028 18.35 Ea. 1.0 LPP 18 66170-028 20.05 Ea. 1.3 LPP

Left Hand Slope End - 028 Gray 12 66158H028 12.20 Ea. 1.0 LPP 15 66160H028 13.45 Ea. 1.5 LPP 18 66162H028 14.20 Ea. 2.0 LPP

Right Hand Slope End - 028 Gray 12 66159H028 12.20 Ea. 1.0 LPP 15 66161H028 13.45 Ea. 1.5 LPP 18 66163H028 14.20 Ea. 2.0 LPP Flat Top Exposed End - 028 Gray

16 gauge 12 60 601660-028 51.20 Ea. 11.0 LPP 15 60 601670-028 64.10 Ea. 14.0 LPP 18 60 601680-028 76.85 Ea. 17.0 LPP


Univeral Hood Support 66070 7.75 Ea. 0.6 LPP

Lockers & Accessories - 028 Gray

See page 14 and 15 for benches, pedes-tals, anchors, key locks and Zee Base.

12


Penco QuickShip


ADA Conversion Accessories Extra Locker Shelves for ADA Application028 Gray, 24 GaugeNote: When ordering an extra shelf and ADA Logo to cre-ate an ADA locker, drilling and attachment of the shelf at the proper height may have to be completed on site by the installer. It is recommended that the ADA locker be ordered as 1-Wide for ease of installing the extra shelf and placement on site. Extra shelves and ADA labels will NOT be attached to QuickShip lockers assembled by Penco.


15 18 60408-028 12.55 Ea. 2.0 LPP 18 18 60412-028 14.20 Ea. 3.0 LPP

ADA Logo LabelPressure sensitive sticker.Shipped loose for field application.

8690 6.20 Ea. 0.1 LPP

End of 028 Gray Vanguard Lockers

073 Champagne

Vanguard Recessed Handle Lockers 1 Tier, 1 Wide073 Champagne

12 12 60 68001R073 249.05 Frm. 50.0 12 15 60 68011R073 259.15 Frm. 52.0 12 18 60 68021R073 273.25 Frm. 57.0

12 12 72 68051R073 272.30 Frm. 57.0 12 15 72 68061R073 281.70 Frm. 65.0 12 18 72 68071R073 296.80 Frm. 69.0

15 18 72 68091R073 321.95 Frm. 71.0

18 18 72 68101R073 343.45 Frm. 83.0


12 12 72 68052R073 249.60 Frm. 53.9 12 15 72 68062R073 258.25 Frm. 56.1

12 18 72 68072R073 272.10 Frm. 60.5

15 18 72 68092R073 295.15 Frm. 71.5

18 18 72 68102R073 314.80 Frm. 80.3


12 12 72 68053R073 226.90 Frm. 49.0 12 15 72 68063R073 234.75 Frm. 51.0

12 18 72 68073R073 247.35 Frm. 55.0

15 18 72 68093R073 268.30 Frm. 65.0

18 18 72 68103R073 286.20 Frm. 73.0

2 Tier, 1 Wide 12 12 30 68111R073 317.15 Frm. 52.0

12 12 36 68121R073 332.75 Frm. 56.0 12 15 36 68131R073 346.90 Frm. 62.0 12 18 36 68141R073 360.00 Frm. 66.0

15 18 36 68261R073 386.50 Frm. 76.0

2 Tier, 2 Wide 12 12 30 68112R073 290.75 Frm. 49.5

12 12 36 68122R073 305.05 Frm. 55.0 12 15 36 68132R073 318.00 Frm. 57.2 12 18 36 68142R073 330.00 Frm. 61.6

15 18 36 68262R073 354.30 Frm. 74.8

2 Tier, 3 Wide 12 12 30 68113R073 264.30 Frm. 45.0

12 12 36 68123R073 277.30 Frm. 50.0 12 15 36 68133R073 289.10 Frm. 52.0 12 18 36 68143R073 300.00 Frm. 56.0

15 18 36 68263R073 322.10 Frm. 68.0




Vanguard Lockers - 073 Champagne

13


Penco QuickShip


Vanguard Box Lockers 5 Tier Box Locker, 1 Wide 12 12 12 68161X073 323.95 Frm. 50.0 12 15 12 68171X073 329.00 Frm. 55.0






Vanguard 16 Person Locker Assembled units shipped in 3 pieces. 69 18 72 68231X073 1107.25 Unit 180.0

Vanguard Unit Packaged Wall MountHeight is body height. One frame of four 12" x 18" x 12" openings w/ coat rack. Flat top, no legs only. Ships in 2 cartons. 45 18 13-5/8 68242X073 450.15 Unit 43.0

Slope Top Kits, Individual - 073 Champagne To Convert Flat Tops to Indiv. Slope Tops1 WideDesigned to convert a 1-wide flat top locker into a slope top locker. Kit contains 1 top, 1 back, 2 ends.

12 12 4 60229H073 21.10 Kit 2.5 12 15 5 60231H073 23.65 Kit 2.9

12 18 6 60233H073 26.90 Kit 3.5

15 18 6 60239H073 32.20 Kit 4.0

18 18 6 60243H073 36.30 Kit 5.0

3 WideDesigned to convert a 3-wide flat top package locker group into slope top lockers. Kit contains 3 tops, 3 backs, 4 ends.

12 12 4 60230H073 57.65 Kit 7.0 LPP 12 15 5 60232H073 64.25 Kit 8.0 LPP 12 18 6 60234H073 73.30 Kit 9.0 LPP

15 18 6 60240H073 88.20 Kit 11.0 LPP

18 18 6 60244H073 98.95 Kit 14.0 LPP

Front Bases - 073 Champagne 18 Gauge.


End Bases - 073 Champagne Single Row 12 6 60204-073 15.35 Ea. 1.0 LPP 15 6 60205-073 15.40 Ea. 2.0 LPP 18 6 60206-073 17.15 Ea. 2.0 LPP

Fillers, Standard Vertical Angle - 073 Champagne 12 60 66113-073 46.00 Ea. 9.0 LPP 12 66 661221-073 46.75 Ea. 9.5 LPP 12 72 661141-073 50.95 Ea. 10.0 LPP 12 78 66116-073 53.35 Ea. 11.0 LPP

Wall Angle (Slip Joint) - 073 Champagne 60 66118-073 27.70 Ea. 3.5 LPP 66 66120-073 31.30 Ea. 3.8 LPP 72 66119-073 34.15 Ea. 4.1 LPP 78 66121-073 43.90 Ea. 4.6 LPP

Flat Top Fillers - 073 ChampagneOverlaps standard tops

15 12 661321C073 18.35 Ea. 2.0 LPP 15 15 661322C073 20.35 Ea. 3.0 LPP 15 18 661323C073 23.90 Ea. 4.0 LPP


14


Penco QuickShip


Flat Top Corner Fillers - 073 Champagne 12 12 66138-073 18.35 Ea. 2.0 LPP 15 15 66139-073 20.45 Ea. 3.0 LPP 18 18 66140-073 28.90 Ea. 4.0 LPP

Slope Top Fillers - 073 Champagne 15 12 661371-073 19.10 Ea. 2.0 LPP 15 15 661372-073 21.40 Ea. 3.0 LPP 15 18 661373-073 24.70 Ea. 4.0 LPP

Slope Top Corner Fillers - 073 Champagne 12 12 66100-073 116.30 Ea. 3.0 LPP 15 15 66101-073 118.50 Ea. 4.0 LPP 18 18 66102-073 121.90 Ea. 6.0 LPP

Slope Hood - 073 Champagne18 gauge, available in 72" length only 72 12 5 66144H073 108.20 Ea. 17.2 LPP 72 15 6 66147H073 123.50 Ea. 20.2 LPP 72 18 7 66150H073 136.75 Ea. 23.2 LPP

Hood Splice - 073 Champagne 12 66168-073 17.30 Ea. 0.5 LPP 15 66169-073 18.35 Ea. 1.0 LPP 18 66170-073 20.05 Ea. 1.3 LPP

Left Hand Slope End - 073 Champagne 12 66158H073 12.20 Ea. 1.0 LPP 15 66160H073 13.45 Ea. 1.5 LPP 18 66162H073 14.20 Ea. 2.0 LPP

Right Hand Slope End - 073 Champagne 12 66159H073 12.20 Ea. 1.0 LPP 15 66161H073 13.45 Ea. 1.5 LPP 18 66163H073 14.20 Ea. 2.0 LPP Flat Top Exposed End - 073 Champagne

16 gauge 12 60 601660-073 51.20 Ea. 11.0 LPP 15 60 601670-073 64.10 Ea. 14.0 LPP 18 60 601680-073 76.85 Ea. 17.0 LPP


Univeral Hood Support 66070 7.75 Ea. 0.6 LPP

ADA Conversion Accessories Extra Locker Shelves for ADA Application073 Champagne, 24 GaugeNote: When ordering an extra shelf and ADA Logo to cre-ate an ADA locker, drilling and attachment of the shelf at the proper height may have to be completed on site by the installer. It is recommended that the ADA locker be ordered as 1-Wide for ease of installing the extra shelf and placement on site. Extra shelves and ADA labels will NOT be attached to QuickShip lockers assembled by Penco.


15 18 60408-073 12.55 Ea. 2.0 LPP 18 18 60412-073 14.20 Ea. 3.0 LPP

ADA Logo LabelPressure sensitive sticker.Shipped loose for field application.

8690 6.20 Ea. 0.1 LPP

Wood Locker Room BenchesFinished with 2 coats of clear lacquer. For fractional sizes, contact your Penco representative. Order Bench Pedestals separately. 36 9-1/2 1-1/4 9611 138.80 Ea. 13.0 LPP

48 9-1/2 1-1/4 9600 166.45 Ea. 16.0 LPP 72 9-1/2 1-1/4 9602 231.70 Ea. 24.0 LPP 96 9-1/2 1-1/4 9604 300.90 Ea. 32.0 LPP

ADA Bench 48 18 1-1/4 9628 343.90 Ea. 30.3 LPP 48 24 1-1/4 9623 377.35 Ea. 36.0 LPP

Bench PedestalsOrder 2 pedestals for benches through 96" long. Hard-ware is supplied to fasten pedestal to bench only (see "Concrete Floor Anchor" #9680.)

Heavy Duty, Steel Tube w/Flanges-028028 Gray. Must be Anchored to Floor.

16-1/4 60822H028 49.50 Ea. 5.0 LPP

Heavy Duty, Steel Tube w/ Flanges-073073 Champagne. Must be Anchored to Floor.

16-1/4 60822H073 49.50 Ea. 5.0 LPP

Stainless Steel PedestalFor free-standing use, order one for each extreme end of benches up to a maximum length of 72". For fixed use (anchored to floor) use two pedestals for benches through 96" long, and three pedestals for benches over 96" to 144" long. Hardware is supplied to fasten pedestal to bench only.

14 16-1/4 60827H 146.35 Ea. 6.0 LPP

Non-Skid Pedestal KitSet of 4 rubber feet and fastening hardware for Stainless Steel Pedestal only. Order 1 set per pedestal.

68420 15.55 Ea. 1.0 LPP


15


Penco QuickShip


Bench Bracket for ADA Bench Bench Bracket w/Hdwr-073 ChampagneTo provide a back support for ADA benches.For attaching 18" deep bench as backrest and 24" deep bench as seat. Minimum of 2 required per ADA bench. Must be used with a minimum of 4 bench pedestals. Steel construction.

20 20 6ACXHP61H073 98.20 Ea. 8.1 LPP

Miscellaneous Locker Accessories Concrete Floor AnchorFor Lockers/Bench Pedestals

1/4 2 9680 1.30 Ea. 0.3 LPP

Key Locks, Built-in, Flat Key Dead Bolt, 2 KeysKeyed Differently, fits RH or LH

9617 11.65 Ea. 0.3 LPP

Master Key, Flat 96171 6.00 Ea. 0.1 LPP

Zee Base, 4" High - 949 BlackFront Zee Base (14 Ga.)A continuous 4" high steel base used with KD lockers with NO legs. Must be cut to length in field. See also #60092-949 - Rear Leg for use with Black 4" Zee base.

72 4 66700H949 54.10 Ea. 11.0 LPP

Splice/End Base(Use at ends of rows & where 6' sections adjoin).

12 4 66701H949 25.85 Ea. 1.6 LPP 15 4 66702H949 27.20 Ea. 1.9 LPP 18 4 66703H949 29.10 Ea. 2.2 LPP

Zee Inside Corner Splice - 4" 4 66709H949 16.45 Ea. 0.9

Rear Leg, Use with 4" Zee Base 13 60092-949 3.40 Ea. 0.5 LPP

Lockers & Accessories - 073 Champagne / Barrier Rail

Zee Base details shown below.

PENCO PRODUCTS, INC. PHONE: 800-562-1000 • FAX: 800-248-1555 • E-MAIL: [email protected] form may be downloaded and reproduced from the distributor section of www.pencoproducts.com.

Order by Catalog Number Only QuickShipPrice-5-2014.indd/pdf

Product Salt Lake City,UT 84088

Memphis,TN 38118

Fort Wayne,IN 46818

Philadelphia,PA 19020

Lockers

5 Tier Lockers

Clipper® Shelving

RivetRite® Shelving

Every customer’s first choice to transform space into safe, secure and effective storage.

www.pencoproducts.com

PENCO PRODUCTS, INC. • 1820 Stonehenge Drive, Greenville, NC 27858 800-562-1000 • FAX: 800-248-1555 • [email protected]

© Copyright 2016 Penco Products, Inc. QuickShipPrice10-2016.indd/pdf

quickship price list - escnj.us...penco will assign the order to the most economical shipping point....

Documents