TAP DOAN DIEN LVC VIET NAM

TONG LONG TY DIEN LIJC MIEN TRUNG

DEN s.6. 43..1' Ngay. .

Chuyen.

EVN

QUY TRINH n

AN TOAN DIEN (Ban hanh kern then Quyet dinh SO 1157/QD-EVN ngay 19 tilling 12 nam 2014

cua TOng Giant doe T4p (loan Dqn Itre V* Nam)

Ha Ni, thing 12 nam 2014

TAP DOAN CONG HOA XA HOI CHU NGHIA VIET NAM DIEN LIXC VIET NAM DOc 14p - Tir do - Hanh phtic

\\9/QD-EVN Ha Noi, ngay A g timing 12 nam 2014 QUYET DINH

Ve vie;c ban hanh Quy trinh An toan dien trong reap doan Dien Inc Qu6c gia Viet Nam

TONG Gam DOC TAP DOAN DIEN LVC VIET NAM Can cur Nghi dinh so 205/2013/ND-CP ngay 06 thang 12 ram 2013 dm

Chinh phfi ve viec ban hanh Dieu le to eh& va hoat Ong dm Tap doan Dien lvc Viet Nam;

Can dr Nghi dinh so 14/2014/ND-CP ngay 26 thang 02 ram 2014 cfra Chinh phir Quy dinh chi tiet thi hanh Lust dien lvc ye an toan dien;

Can dr Thong tu. so 31/2014/TT-BCT ngay 02 thang 10 nam 2014 cfra BO twang Bo Cong Thtrang ve Quy dinh chi tiet mot so not dung ye an toan dien;

Can cur Quy chuan ky thuat quac gia v'e an toan dien (QCVN 01: 2008/BCT) cua BO Gong Thtrang;

Theo de nghi cfra Truerng Ban An toan,

QUYET DINH: Dieu I. Ban hanh kern theo Quyet dinh nay "Quy trinh An toan dien"

trong Tap doan Dien lvc Quoc gia Viet Nam. Dieu 2. Quy trinh nay c6 hieu lvc ke tir ngay 01 thang 01 nam 2015 va

thay the cho Quy trinh An toan dien ban hanh theo Quy6t dinh so 1186/QD-EVN ngay 07 thang 12 nam 2011 cfra Tap doan Dien lvc Viet Nam.

Dieu 3. Cac Ph6 rang Giam dac, Twang Ban Tang hop, Tmong Ban 'dem soat not IDO cfra dOng thanh vien, Chanh Van phong, Truong cac Ban chirc nang cita co. quan Tap doan Dien lvc Viet Nam, Thu twang cac don vi trVc thuOc, cac Cong ty con do EVN nam gift 100% von dieu le, Ngtred dai dien theo fry quyen phan von g6p cua Tap doan Dien lvc Viet Nam tai cac cong ty con, ding ty lien ket chiu trach nhiem thi hanh quyet dinh nay./.

Noi nh(tn: - Ntur diL 3; - Cpc KTAT va MTCN-B0 CT (b/cao); - d6ng thanh vin (b/cao); - Cong doan BLVN; - Ltru VT, AT.

TAP DOAN CONG HOA XA HQI CHU NGHIA VIET NAM DIEN LI.J'C VIET NAM DOc I4p - Tv do - Hanh philc

QUY TRINH AN TOAN DIEN

TRONG TAP DOAN DIEN LifC QUOC GIA VIET NAM (Ban hanh kern theo Quyit clinh so 1157/QD-EVN ngay 19 thong 12 elm 2014

clia Thing Giam doe Tap doan Dien h:rc Viet Nam) Chuang I

QUY DINH CHUNG Dieu 1. Phalli vi dieu chink

Quy trinh nay quy dinh ye cac nguyen tac, bien phap dam boo an town dien khi thgc hien cong viec ,quan I/ van hanh, thl nghiem, stra xay dung duong day dan dien, thiet bi dien va cac cong viec khac theo quy dinh cua phap luat & thiCt bi dien, he th6ng dien do Tap doan Dien lgc Viet Nam quanlr.

Dieu 2. Dili tircing Ai) dung 1. Cong ty me - Tap doan Dien lye Viet Nam; 2. Cac Don vi truc thuOc Tap doan Dien lgc Viet Nam;

3. Cac Cong ty con do Tap doan Dien lgc Viet Nam nom gill 100% von diCu le;

4. Ngued dai dien phap von gOp theo uy quyCn ciia Tap doan Dien lgc Viet Nam tai cong ty con, cong ty lien ket;

5. Cac to chirc, ca quan, dan vi, canhan khac(khong phai la cac don ca nhan quy Binh tai Khoan 1, 2, 3, 4 Dieu 2) khi den lam viec u cong trinh

va thiet bi dien thu'Oc quyen quan ly cua EVN, cac don vi true thuOc, cac cong ty con do EVN nom gift 100% von diCu

Dieu 3. Giai thich tir ngI va cac tir vitt tat

Trong Quy trinh nay, cac tir ngit va tir vitt tat clued day (Iliac hiCu nip./ sau:

1. EVN: Tap doan Dien lgc Viet Nam. 2. Ngithi lanh dao cong viec la ngu&i chi dao chung khi cong viec do

nhieu don vi cong tac dia ding mot to chirc hoot dOng dien lgc thgc hien.

3. Ngtroi chi huy trvc tiep la ngtreri co trach nhiem phan cong cong viec, chi huy va giam sat nhan vien don vi cong tac trong suot qua trinh thvc hien cong viec.

4. Nguai cap phiiu cong tac la ngued cUa clan vi trvc tiep quan 1)'7 van hanh cac thiet bi dien, clueing day dan dien dugc giao nhiem vu cap phieu cong tac theo quy dinh cua Quy trinh nay.

5. Ngiroi cho phep la ngued thvc hien viec cho phep dan vi cong tac vao lam viec a tai hien trueyng (nai hoac vi tri lam viec), khi hien truang cong tac da du dieu kien dam bao an toan ve dien.

6. Ngweri gicim sat an toan dien la ngued c6 kin thirc ve an toan dien, throe huan luyen, chi dinh va thvc hien viec giarn sat an toan dien cho dan vi ding tac.

7. Ngu.dei canh giai la rived duot chi dinh va thvc hien viec theo doi va canh bao an toan lien quan den nai lam viec doi voi cong (long.

, 8. Dan vi cong tac la dan vi thvc hien cong viec sira chira, thi nghiem, xay lap v.v. M6i dcm vi cong tac phai c6 it nhat 02 ngued, trong do phai c6 01 ngtx6i chi huy trvc tie') chiu trach nhiem chung.

9. Dan vi lam cong viec la dan vi c6 quyen va trach nhiem cir ra don vi cong tac de thvc hien cong viec sira chua, thi nghiem, xay lap v.v.

10. Dan vi quan ly van hanh la dan vi trixc tiep thvc hien cong viec quan ly, van hanh cac thiet bi dien, throng day dan diem

11. Nhan vien don vi cOng tac la ngued cua dan vi cOng tac trvc tiep thvc hien cong viec do nguai chi huy trVc tiep phan Cong.

12. Lam viec co dien la ding viec lam 6' thiet bi mang dien, c6 sir dung cac trang bi, dung cu chuyen dung.

13. Lam viec co cat dien hoan toan la cong viec lam & thiet bi dien ngoai trefi hoac trong nha da &roc cat dien tix mai phia (ka ca dau vao cUa duo'ng day tren khOng va duemg cap), cac 16i di ra phan phan phoi ngoai trai hoac thong sang phong ben canh dang c6 dien da khod cira, trong trueng hop cl4c biet thi chi c6 nguon dien ha ap de tien hanh cOng viec.

14. Lam viec co cat dien mot phdn la cong viec lam 'Cr thiet bi dien ngoai tred hoac trong nha chi c6 mot phan dugc cat dien, de lam viec hoac thiet bi dien ducec cat dien hoan toan nhung cac loi di ra phan phan ph6i ngoai tred ho4c thong sang ph6ng ben canh c6 dien van me( cira.

15. Phtrang tien bao ve Ca nhan la trang bi ma ngued eta dan vi cOng tac phai sir dung de phOng ngra tai nan cho chinh minh.

16. Xe chuyen dimg la loci xe duoc trang bi phuang tien a sir dung cho muc dich rieng biet.

17. Cat dien la cach ly phan dang mang dien khoi ngu6n dien.

2

18. Tram cach cUn khi (Gas insulated substation - GIS) la tram thu gon dat trong buong kim loaf dugc not dat, each dien cho cac thiet bi dien chinh cua tram bang chat khi nen (khong phai la khong khi).

19. DiOz ha ap la dien ap du6i 1000 V. 20. Dien cao ap la dien ap tit 1000 V tra len.

Dieu 4. Nhiing quy dinh chung de dam bao an toan dien

1. Moi ding viec khi thuc hien tai thiet bi va vat lieu dien, a g'an hoac lien quan den thiet bi dien va vat lieu dien mang dien (ke ca dien cam Ung) deu phai thuc hien theo phieu cong tac hoac lenh cong tac quy dinh trong Quy trinh nay.

, 2. Cdm,ra menh lenh hoac giao cong viec cho nhang ngtroi chua dugc huan luyen, kiem tra dat yeu cau Quy trinh nay va cac quy trinh c6 lien quan, chua biet ro nhang viec s8 phai lam.

3. Nhang menh lenh khong dung Quy trinh nay va cac quy trinh co lien quan khac, c6 nguy ca mat an toan cho ngued hoac thiet bi thi nguoi nhan lenh co quyen 'thong chap hanh, neu nguesi ra lenh khOng chap thuan thi nguei nhan lenh dugc quyen bao cao voi cap ten.

4. Khi phat hien can bO, cong nhan vi pham Quy trinh nay va cac quy trinh c6 lien quan khk, c6 nguy ca de doa den tinh mang con nguoi hoac mat an toan dOi vOi thiet bi, nguei phat hien phai lap tire ngan chan va bao cao voi cap c6 tham quyen.

5. Nguefi trvc tiep lam cong tac guar' ly van hanh, kinh doanh, thi nghiem, sixa xay dien phai co Ich6e tieu chuan theo quy dinh cua phap luat ye lao Ong.

6. Nhan vien m6i phai qua thed gian kern cap cUa nhan vien c6 kinh nghiem de co trinh cho ky thuat va an toan theo yeu cau cua cong viec, sau do phai dugc kiem tra bang bai viet va van dap true tiep, dat yeu cau mai dugc giao nhiem vu.

7. Quan dOc, ph6 quan d8c phan xtfang (hoac cap tuang duang), dOi truOng, pho coi san xuat, ky thuat vien, ky su trvc tiep san xuat, cong nhan (nhan vien) phai dugc huan luyen, kiem tra quy trinh nay moi nam 01 lan. Giam dOc, Ph6 Giam doe ky thuat cap Cong ty (hoac clan vi tuang throng) cong nhan ket qua huAn luyen, xep bac va cap the an toan dien, luu giu h8 so huan luyen theo hang nam.

Can dr cac not dung quy dinh tai Dieu 5, Dieu 6, Dieu 7 Thong to so 31/2014/TT-BCT ngay 02/10/2014 cua BO Cong Thuang, not dung Quy trinh nay va thuc to san xuat tai ca sa cac dan vi cap COng ty c6 trach nhiem bien soan, ban hanh tai lieu huan luyen sao cho phir hop, sat thuc v6i nhiem vv cong viec cua nguei lao dOng.

3

Bac an toan dien va The an toan dien thuc hien theo quy dinh tai Dieu 8, Dieu 9 va P1-11.1 LLJC I Thong to so 31/2014/TT-BCT ngay 02/10/2014 dm BO Cong Thuang dugc trich dan tai Phu luc I cua Quy trinh nay.

8. Khi phat hien c6 nguai bi dien gi4t, trong bAt kST tnrang hop nao nguai pha.i hien clang phai tim bien phap nhanh nhat de tach nan nhan ra khoi mach dien va dru china nguai bi nan. Phuong phap ciru china nguai bi dien giat dugc huang dan o Phu luc II cua Quy trinh nay.

Dieu 5. Trach nhiem dam bao an toan cua cac cap span ly va lao gong

1. Giam dee, Ph6 Giam dOc dcm vi trvc tiep sir dung lao d'Ong; Nguoi quan 151, dieu hanh trvc tiep cac cong truOng, phan >along hoc cac b8 phan tuang ducmg c6 nhiem vu de ra cac bien phap an toan lao dOngz kiem tra va giarn sat thuc hien cac bien phap an toan d6 trong don vi minh, dong thai phai chiu hoan toan trach nhiem ye nhang bien phap an toan ma minh da de ra.

2. Can bO an toan cac cap c6 nhiem vu kiern tra, giarn sat cac bien phap an toan da" de ra va ghi thong bao an toan de nhL nho khi phat hien nhang vi pham c6 the dan den mat an toan.

corong truangshgp vi pham cac

bien phap an toan c6 the clan den tai nan, su O thi dugc quyen lap bien ban va dinh chi cong viec de thuc hien du, dung cac bien phap an toan, dOng thai phai chiu hoan toan trach nhiem ye quyet dinh cua minh.

3. BO phasn hoc ca nhan truc tiep thuc hien nhiem vu chi dugc de hanh ding viec khi da thuc hien di). \Ta . dung cac bien phap an toan dal de ra.

Trong twang hop vi pham bien phap an toan bi phat hien, lap bien ban yeu cau tam dirng cong viec thi phai ngay lap tirc dive hien du, clung cac bien phap an toan da de ra ho4c dugc yeu cau. Chi dugc tiep tuc tien hanh cong viec sau khi dal lam du, dung cac quy dinh ye an toan va dugc can bO an toan chap thu4n.

Chuang II THAO TAC THIET BI DIEN

Dieu 6. Quy dinh chung 1. Trong the dO binh thuOng, cac thao taco thiet bi dien cao ap deu

phai 14p va thuc hien theo phieu thao tac quy dinh trong Quy trinh Thao tac he thong dien quOc gia.

Cho phep thuc hien the thao tac ten so do not dien chink bang cac "Phieu thao tac mau". Phieu thao tac mau phai dugc cac cap c6 tham quyen phe duyet mai c6 hieu luc thi hanh.

2. Trong the dO su c8, thao tac cac thiet bi dien thuc hien theo Quy trinh Xir ly su co he th8ng dien quOc gia.

3. Thao tac clang, cat dien a thiet bi dien cao ap, it nhat phai do hai nguai thuc hien (trir truang hgp thiet bi dugc trang bi d4'c biet va c6 quy trinh thao tac rieng). Nhiing nguai nay phai hieu fa sa do va vi tri cUa thiet bi tai hien truang, mot nguai thao tac va mot nguai giam sat thao tac. Nguiyi thao tac phai c6 bac 3 an toan dien tra len, nguai giam sat thao tac phai c6 bac 4 an toan dien ter len.

, 4. Cam dong, cat dien bang sao than tac va dao cach ly thao tac truc tiep tai ciao hoac thay day chi doi ved thiet bi a ngodi trai trong lUc mua to nuac chay thanh dong tren thiet bi, dung cu an toan hoac gang c6 giong set.

5. Dao cach ly dugc phep thao tac khong dien ho4c thao tac c6 dien khi dong dien thao tac nho han dOng dien cho phep theo quy trinh van hanh dm dao cach ly do do dan vi quan ly van hanh ban hanh. Cac truang hop Eng dao cach ly de tien hanh cac than tac c6 dien dugc quy dinh cu the trong Quy trinh Thao tac he thOng dien quoc gia.

6. Truang hgp da'c biet dugc phep &rig, cat dao cach ly khi trait, mua, giOng a nhung duang day khong c6 dien va thay day chi dm may bien ap, may bien dien ap vao inc khi hau am, trot sau khi da cat dao each ly ca hai phia cao ap va ha ap cila may bien ap, may bien dien ap.

7. Neu xay ra tai nan, six c6 hoac co the gay ra mat an toan cho nguai va hu hong thiet bi thi nhan vien van hanh dugc pile') cat cac may cat, dao each ly ma khong phai di lenh hoac phieu, nhung sau do phai bao cao cho nhan vien van hanh cap tren Va nguai phu trach truc tiep cua minh biet not dung nhting viec da lam, dong thai phai ghi day du vao so nhat 14 van hanh.

8. Phieu thao tac thuc hien xong phai dugc km it nhat 03 thang. TruOng hgp thao tac c6 lien quan den su co, tai nan thi cac phieu thao tac c6 lien quan phai dugc luu trong ho so diet' tra su co, tai nan lao dOng cilia dan vi.

Dieu 7. Track nhiem dm nhfing nprol thuc hien

1. Nguai ra lenh thao tac phai hieu ra trinh to tien hanh tat ca cac buck thao tac da dg kien, dieu kien cho phep thuc hien theo tinh trang sa do thgc to va the do van hanh thiet bi. Khi truyen dat lenh, nguai ra lenh phai not rei ho ten minh va xac dinh 1.6 ho ten, chirc danh dm nguai nhan lenh. Lenh thao tac phai dugc ghi am va ghi chep day dil.

2. Nguai nhan lenh thao tac (nguai giam sat thao tac) phai nhac lai toan bi, lenh, ghi chep day du trinh to thao tac, ten nguai ra lenh va thai diem yeu cau thao tac. Khi chua hieu rO lenh thao tac thi c6 quyen de nghi nguai ra lenh giai thich. Chi khi nguai ra lenh xac dinh hoan toan dUng va cho phep thao tac thi nguai giam sat thao tac va nguai thao tac mai dugc tien hanh thao tac. Thao tac xong phai ghi lai thai diem ket thUc va bao cao lai cho nguai ra lenh. Truang hgp nguai nhan lenh thao tac khong phai la nguai giam sat thao tac thi nguai nhan chuyen lenh thao tac phai ghi day du lenh do vao so nhat

5

ky van hanh, ghi am (neu co) va c6 trach nhiem chuyen ngay lenh thao tac den dung nguai giam sat thao tac.

3. Trong dieu kien van hanh binh thtrang nguai giam sat thao tac va nguai thao tac phai thpc hien nhihig quy dinh sau:

a) Khi nhan phieu thao tac phai doc ky va kiem tra tai nOi dung thao tac theo so do, neu chug thi phai hoi 10 nguai ra lenh. Neu nh4n yenh bang dien thoai thi nguai giam sat thao tac phai ghi day du lenh do va nhac lai tirng d'Ong tac trong dien thoai, ghi am lai (neu co), ghi ten nguai ra lenh, nhan lenh, ngay, truyen lenh vao phial thao tac, nhat lc-5T van hanh;

,b) Ngtrai giam sat thao tac va nguai thao tac, sau khi xem xet khOng con thac mac ding 1(57 vao phieu, mang phieu den dia diem thao tac;

c) Tai not tri) thao tac phai kiem tra lai mot lan theo so 6 (neu co) va doi chieu vi tri thiet bi tren thge to dimg not dung ghi trong phieu, &rig thai kiem tra xung quanh hay tren thiet bi con gi tra ngai khong, sau do mai dugc phep thao tac;

d) Ngued giam sat thao tac doc to timg dOng tac theo tit* to da ghi trong phieu. Ngtrai thao tac phai nhac lai, nguai giam sat thao tac ra lenh "dOng" hoac "cat" nguai thao tac mod dugc lam dOng tac. Moi dOng the a thvc hien xong, nguai giam sat d8u phai anti dau (x) vao 'nue tuong ang trong phieu;

e) Trong khi thao tac, neu nghi nga dOng,tac vira thvc hien thi phai ngimg, ngay cong viec kiem tra lai toan neu khong c6 bat thuong thi moi tiep tpc tier' hanh;

f) Neu thao tac sai hoac gay su co thi phai ngimg ngay viec thpc hien theo phieu thao tac va bao cad cho nguai ra lenh biet. Vies thgc hien tiep thao tac phai tien hanh theo mot phial mai;

g) Sau khi thao tac cat dien a lam viec, bO phan truyen dOng cua dao each ly phai treo bien "Cam clang dien! CO nguai dang lam viec" va phai di them bien phap tang cuang (khod tay truyen dOng, at tam lot, Cir. nguai canh gac v.v) de khOng the dong dao dua dien vao thiet bi c6 nguai dang lam viec.

h) DOng, cat dao each ly tai ch6 true tiep bang tay phai mang gang tay each dien va di ung each dien (hoac mang gang tay each dien va dirng tren gh8 each dien). Chi dugc &mg, cat dao each ly (hoac cau chi to rai) tren cot vai cap dien ap < 35 kV bang sao each dien khi dieu kien khoang each tir phan clan dien thap nhat cua cac thiet bi nay den nguai thao tac khOng nhO hon 3,0 m, trong tnrang hop nay nguai thao tac phai mang gang tay each dien.

4. Trong moi tnremg hop, nguai ra lenh thao tac, nguai giam sat thao tac, nguai thao tac, nguai nhan chuyen lenh thao tac (neu co) phai chiu trach

6

nhiem ve viec thao tic cac thiet bi diem Chi dugc cho la hoan thanh nhi'em vu khi ngued giam sat thao tac bac) cao cho ngued ra lenh thao tac da thao tac xong.

Chuvng III BIEN PHAP KC' THUAT CHUAN BI NOT LAM VIEC

DE DAM BAO AN TORN Kill TIEN HANH CONG VIEC

Muc 1 QUY DINH CHUNG

Dieu 8. Bien Oar, 11(S, thu4t chung Nhang bien pilaf) ky thuat chuan bi nod lam viec phai cat dien bao

gOm: 1. Cat dien va ngan chan c6 dien trO lai not lam viec. 2. Kiem tra khong con dien. 3. Brat (lam) tiep dat. 4. Dat (lam) rao chin; treo bien bao, tin,hieu. Neu cat dien hoan town

thi khong phai lam rao chan. Bien bao an toan ye dien thuc hien theo quy dinh tai Dieu 14, Dieu 15, Dieu 16 va PHIJ LUC II Thong to so 31/2014/TT-BCT ngay 02/10/2014 dm B6 Gong Thuang dugc trich dan tai Phu luc III cua Quy trinh nay.

Muc 2 CAT DIEN VA NGAN CHAN CO DIEN TROD LAI NM LAM VIEC

Dieu 9. C'At dien de lam cong viec trong nhirng truirng hyp sau:

1. Nhang pWan c6 dien ma tai d6 se tien hanh cong viec. 2. Nhang phan c6 dien ma khi lam viec khong the tranh dugc va cham

hoac vi pham khoang cach quy dinh nhu sau:

Cap dien ap (kV) Khoang each den phan mang dien (m) Tir 1 den 15 0,7 Tren 15 den 35 1,0 Teen 35 den 110 1,5 220 2,5 500 4,5 3. Truang hgp khong the cat dien dugc, nhung khi lam viec van c6

kha nang vi pham khoang cach quy dinh tai Khoan 2 Dieu nay thi phai lam rao chan. Khoang cach nho nhat tir rao chan den phan mang dien quy dinh nhu sau:

7

Cap dien tip (kV) Khoang each nho nhat (m) Tir 1 den 15 0,35 Tren 15 den 35 0,6 Teen 35 den 110 1,5 220 2,5 500 4,5

* Yeu cau, each thi.rc dat rao chan, treo bien bao, tinh hieu thuc hien theo quy dinh tai Dieu 17 va 18 Quy trinh nay va &roc xac dinh thy theo dieu kien cu the, tinh chat cong viec do ngued chuan bi not lam viec, nguai cho phep hay ngued chi huy true tiep chiu trach nhiem.

Dieu 10. Cac yeti cau khi cat dien de lam cong viec

Cat dien de lam cong viec phai thuc hien nhu. sau: 1. Phan thiet bi tien hanh cong viec phai &roc nhin thay ro da cach ly

khoi cac phan c6 dien tir moi phia bang each cat dao each ly, thao cau chi, thao dau cap, thao day dan (trir tram GIS).

2. dm cat dien d lam viec chi bang may cat, dao phv tai va dao each ly c6 bO truyen dOsng to Ong.

3. Phai ngan ch4n doge nhang nguOn dien cao, ha tip qua cac may bien tip luc, may bien tip do luting, may phat dien khac c6 dien nguoc tr& lai gay nguy hiem cho ngued lam viec.

DOi v6i nhang may phat dien diesel hoac nhang may phat dien bang nguOn nang luting so cap khac khi hoat,dOng phai tach rieng re, hoan toan dOc lap (ke phan trung tinh) ved phan thiet bi clang c6 ngued lam viec.

, 4. Neu cat dien bang may cat va dao each ly ,c6 bO truyen dOng (lieu khien xa thi phai khod mach dial khien cac thiet bi nay, bao cat aptomat, go' cau chi v.v.

DOi voi dao cach ly thao tac true tiep bang tay, sau khi cat dien phai kiem tra luOi dao da 6 vi tri cat va c6 giai phap nhu 6 Diem g Khoan 3 Dieu 7 Quy trinh nay de khong the &rig dien tro. lai.

5. Cat dien do nhan vien van hanh dam nhiem. Cam uST nhiem viec thao tac cat, (Ring cho ngued cila don vi cong tac, trir tnr&ng hop nguati thuc hien thao tac da (loge huan luyen, kiem tra cong nhan chirc danh van hanh va throe phep caa don vi van hanh.

, 6. Cat dien timg phan d lam viec phai giao cho nhan vien van hanh nam yang so do va vi tri thuc to cua thiet bi de ngan ngira kha n'ang nham lan, gay nguy hiem cho don vi cong tac.

8

7. Nguai thvc hien thao tac cat dien phai treo bien: "Cam &mg dien! Co ngueri dang lam viec" 6. cac 130 phan truy'en dOng cna cac may cat, dao cach ly v.v ma tix do c6 the (long dien den nai lam viec. Vai cac dao cach ly mot pha, phai treo bier' bao a timg pha. Chi c6 ngubi treo bien hoac ngtrai dugc chi dinh thay the mai dugc thao cac Nen bao, nay. Khi lam viec ten throng day thi dao cach ly duerng day treo bien "Cam &mg dien! Co ngtred dang lam viec".

Muc 3 MEM TRA KHONG CON DEPT

Dieu 11. Kiem tra khong con dien

1. Ngued thirc hien thao tac cat dien dong thoi phai tien hanh kiem tra kh'Ong con dien a cac thiet bi da cat dien.

2. Kim tra khong con dien bang thiet bi thir dien chuyen dimg phu hgp vai dien ap danh dinh cua thiet bi dien can thir, nhu but thin dien, cOi thir dien; phai thir tat ca cac pha va cac phia vao, ra thiet dien.

3. Cam can dr tin,hieu den, iv le, d8ng 1-18 xac nhan thiit dien khong con dien, nhung neu den, ra le, clung ho bao tin hi'eu c6 dien thi phai xem nhu thiet bi van c6 dien.

4. Phai kiem tra,thiit thir dien nui c6 dien truck, sau do mai thir nui khong con dien. Neu a nui lam viec khong co dien de thir thi dugc thir nal khac truac 111c flair b nui lam viec va phai bao quail tot thiet bi thir dien khi chuyen ch .a.

Muc 4 TIEP DAT

Dieu 12. Tiep dAt noi lam viec di Cat dien

Nai lam viec c6 cat dien, vi tri tier) dat phai thvc hien nhu sau: 1. Phai flip dat ngay sau khi thir het dien. 2. Tiip dat & tat ca cac pha cUa thiit bi ve phia c kha nang d'an dien

din. 3. Dam bao khoang each an toan dui vai phan con mang dien.

, 4. Dam bao cho toan 130 dun vi cong tac nam tron trong vAng bao ve cua not dat.

Dieu 13. Tiep &At khi lam viec 6' tram bien Ai) phan phoi hoac to phan phi

1. Khi lam cong viec c6 cat dien hoan toan dugc phep chi phai tiep dat thanh cai va mach dau ten do se tien hanh cong viec. Neu chuyen sang lam

9

viec 6. mach ddu khac thi mach ddu se lam viec phai tiep d'At, trong truang hop nay chi dugc lam viec tren mach dau c6 tiep dat.

2. Khi,sira chira thanh cai c6 phan doan thi ten m8i phan doan phai c6 mot b6 tiep dat.

Dieu 14. Tit') dat khi lam viec tren throng day Dueng day da cat dien (hoac gang xay dung mai) c6 tiep Vic hay den

gan day dan (ice ca khi mang dung cu) vai khoang each theo quy dinh tai Khoan 2 Dieu 9 Quy trinh nay dugc thuc hien nhu sau:

, 1. Tai vi tri lam viec phai c6 tiep dkday,d-dn, neu tiep ddt nay can tr& den cong viec thi dugc lam 6. vi tri ke gan nhat vi tri lam viec ve phia nguon dien den. Khi cong viec c6 thao red day dan thi phai tiep dat a hai phia ch6 dinh thao roi tnxerc khi thao.

2. Khi chi lam viec tai (hoac g'an ke ca khi mang dung cu) day dan mot pha cua duang day tren khOng dien ap -lir 35 kV trer len thi tai nai lam viec chi can tiep dat day dan cua pha dO vol dieu kien khoang each giira day clan cac pha khOng nho han 2,0 m doi v0i duerng day 35 kV; 3,0 m doi vOi duiing day 110 kV; 5,0 m dOi vOi duerng day 220 kV; 10,0 m (16'i voi throng day 500 kV. Chi dugc lam viec a day dan cua pha da tiep dat, day dan cua hai pha khOng tiep dat phai dugc coi nhu c6 dien.

3. Khi lam viec tai khoang cot vugt song lan thi phai tiep d'At tai cot vuo:t va cot ham lien ke a ca hai phia.

4. Khi ding lam viec a nhieu vi tri tren mot doan duemg day khong co nhanh re phai,lam,tiep datahai dAu khu vuc lam viec, khoang cach xa nhAt gift hai bO tiep dat khong ion Ilan 2,0 km. Neu doan duerng day not ten di ben canh (song song) hoac giao cheo v6i duerng day cao ap co dien thi khoang each xa nhat gala hai b6 tiep dat khOnglOn han 500 m.

5. Trueng hop trong doan duerng day, c6 nhanh re ma khOng cat dugc dao cach ly thi nhanh phai lam m6tb6 tiep data dau nhanh.

, 6. DOi nhanh re vao tram, neu dai khong qua 200 m phai lam mot b6, tiep dat phia nguon dienden va dau kia phai cat dao cach ly vao may bien ap.

7. DOi vai duerng cap ndam phai lam tiep,ddt hai dAu r' doan cap tie hanh ding viec. Throng hop lamyiec tai mot dau cap ma theo yeti cau cong viec khong the tiep dat dugc tai dau cap nay thi trong theri gian thuc hien cong viec do phai c6 tiep data dau cap con lai.

, 8. DOI vai duong day boc, neu khong thao red day dan thi phai lam tiep data hai dau khoang dimg co not day dan trong khu vire lam viec.

9. Truang hop lam viec ten &Tong day ha ap cho phep lam tiep dat bang cach chap ca 3 pha v6i day trung tinh va not vai dat.

10

Di'eu 15. L'Ap va dia. () tiep dAt Ldp va thao tiep ddt phai dip hien nhu sau: 1. Lap va thao tiep slat do hai nguOi thgc hien, trong do mot nguai

phai co bac an toan dien tir bac 4 tr6 len, nguai con lai tir bac 3 troy 2. Khi lap tiep ddst phai ddu mot ddu day tier), ddt v6i ddt trtroc, sau d6

dung sao cach then (ho4c deo gang tay cach dien dui v6i thiet bi dien ha ap) de lap dau con lai vao day dan. Thao tiep dat lam ngtrgc lai. Dau day dau xuong dat phai bat bang bu-long, cam van xodn. Neu dau vao tiep dat cua cot hoc he thong not dat chung thi phai cao sach ri cho dau not dat. Tnreng hop nai ddt cot bi hOng, kh6 bdt bu-long phai clung C9C sat (ho'ac dOng) sau it nhdt 1,0 m de lam tiep ddt.

3. Khi th-vc hien thao tac tier) ddt ten cot diem nguai lam tiep ddt phai dam bao khoang each an toan theo quy dinh tai Khoan 2 Dieu 9 dm Quy trinh nay va khOng de cac dau day tiep dat va cham vao nguai, va cham vao cac day dan, thi'et bi khac tren cot dien.

Dieu 16. Day tier) dat di Ong 1. Day tiep ddt la day chuyen thing, b:kg d6ng hoc hop kim trdn

nhieu sgi, mem (co the dtrgc boc bang nhira trong). 2. Tiet dien phai chiu dupe tac dung dien dOng va nhiet hoc nhung

khOng nhu han 16 mm2.

Muc 5 LAM RAO CHAN; TREO BIEN BAO, TIN HIEU

Dieu 17. Lam rao chan

1. Rao chan tam tiled de ngan each phdn thiet bi c6 dien nai lam viec phai lam bang vat lieu khO va chac chan, nhu tre, gO, nhra, tam vat lieu each dien v.v. Khoang cach tir rao chan tam th6i den phan co dien theo quy dinh tai Khoan 2 Dieu 9 Quy trinh nay.

2. Tru6ng hop d'ac biet, a thiet bi dien cap dien ap den 15 kV, rao chan tam th6i bang vat lieu cach dien doge cham vao phan c6 diem Rao chan nhu \Tay phai phil hop vai tieu chuan ky thuat sir dung va thir nghiem dung cu an toan diing thiet bi dien. Khi lam rao chan loci nay phai deo gang each diem di ung cach dien hoc dimg tren tam tham each dien va awe hien duai su giam sat cilia ngtr6i c6 bac 5 an toan diem

3. Rao chan tam thai phai dat sao cho khi co nguy hiem nguai lam viec de clang thoat ra khoi viing nguy hiem.

11

Dieu 18. Treo hien bao, tin hien

, 1. 1340 phan truyen dOng dm may cat, dao cach ly ma tir do gong dien den nai lam viec, treo 'Dien "Cam" quy dinh tai Khoan 7 Dieu 10 Quy trinh nay.

2. Tren rao chan tam then phai treo bien canh bao: lai! CO dien nguy hiem chet nguai". Truamg hop dac biet phai treo them tin hieu canh bao khac.

3. 0 thiet bi phan phi dien trong nha, ten rao Igen holac da sat dia cac ngan ben canh va doi dien yeti cho lam viec phai treo bien canh bao "Dirng lai! CO dien nguy hiem chet nguai". Neu et cac ngan ben canh va doi dien khOng c rao igen hoac cira va cac len di nguai lam viec khOng dugc di qua thl phai dung rao chan tam thai ngan lai va treo bien canh bao "DUng lai! CO dien nguy hiem chet nguai". Tai nai lam viec, sau khi lam tiep dat treo bien chi dan "Lam viec tai day!".

4. Trong thai gian lam viec cam di chuyen hoac thao cac rao chan tam thai va bien bao, tin hieu.

Chuang IV BIEN PHAP TO CHI:rC

DE DAM BAO AN TOAN KM TIEN HANH CONG VIEC

Muc 1 QUY DINH CHUNG

Dieu 19. Bien phap to chin chung

Bien phap to chirc de dam bao an toan khi lam viec thiet bi dien bao gOin:

1. Khao sat, lap bien ban hien truang (neu can thiet). 2. Dang 1(7 cong tac. 3. Lam viec theo Phieu cong tac hoac Lenh cong tac. 4. Cho phep lam viec tai hien truang (noi hoac vi tri thgc hien cong

viec). 5. Giam sat an town trong thai gian lam viec.

. 6. Nhang bien phap chirc khac nhtr: Nghi giai lao; Di chuyen dia diem (nai hoac vi tri) lam viec; Nghi het ngay lam viec va bat dau ngay tiep theo; Thay doi nguai khi lam viec; Ket thiac cong viec, trao tra noi lam viec, khod phieu va &rig dien; Trach nhiem cUa cac don vi c lien quan khi thgc hien cong viec.

12

Muc 2 ICHAO SAT, LAP BIEN BAN HIEN TRU'ONG; BANG K.)? CONG TAC

Dieu 20. Khdo sat, 14 bien ban hien truirng

1. Dan vi to chirc cong viec phai phi hop vOi don vi quan VT van hanh de to chirc khao sat, lap bien ban hien truang (trix truang hop cong viec dun gian, it yeu to nguy hiem ye an toan dien ma dan vi quan VT van hanh va dun vi lam cong viec biet ro, thay khOng phai khao sat) v6i su tham gia day du cua cac don vi quan 15( van hanh c6 lien quan va don vi diet' dO (khi c6 yeu cau cua don vi quan VT van hanh).Nguai di khao sat phai la nhang nguai se dugc dr lam nguai chi huy true tiep, hoac nguai giam sat an toan dien (neu co), hoac nguai lanh dao cong viec ciia don vi cong tac. Truang hop nguai chi huy true tiep, hoac nguai giam sat an toan dien (neu co), hoac nguai lanh dao cong viec khong, di khao sat hien truang dugc thi ho van phai biet ro cac yeu to nguy hiem, diet' kien an toan khi tien hanh cong viec.

2. Truang hop, neu cong viec c6 lien quan den thiet bi cua tir 02 don vi quan VT van hanh tr len thi khi khao sat, lap bien ban hien truang don vi lam cong viec va cac dun 'vi quan VT van hanh phai thong nhat, lam ro trach nhiem cua tang ben, dr mot don vi quan VT van hanh chiu trach nhiem cap Phieu cong tac (hoac Lenh cong tac), cac don vi quail ly van hanh can 10 chiu trach nhiem cap Giay phOi hop cho phep de khi to chirc trien khai cong viec dam bao tuyet dOi an toan. Vic cix don vi quan VT van hanh cap Phieu cong tac, va Giay phOi hop cho phep thgc hien theo quy dinh tai Diem c Khoan 2 Dieu 45 Quy trinh nay.

3. Mau Bien ban khao sat hien truong theo quy dinh tai Phu lac IV dm Quy trinh nay.

Dieu 21. Bang 14 cong tac

1. Dorn vi lam cong viec phai gCri Gidy clang ky cong tac den tang don vi quan, VT van hanh lien quan de cac don vi nay lap ke hoach clang 14 cat dien, viet Phieu cong tac, Giay phoi hop cho phep, L'enh cong tac (twang hop dugc lam viec bang L'enh cong tac do don vi quan 1ST van hanh cap).

a) Twang hop clan vi lam cong viec la 1)0 phan trong Dan vi quan VT van hanh tir cap Cong ty tr .& xuang thgc hien theo mau Giay gang 14 cong tac quy dinh tai Phu lac V hoac mau Giay gang ky ding tac va Phieu cOng tac (l 02 phial dugc ghep chung trong 01 to giay) quy dinh tai Phu lac VI cua Quy trinh nay;

b) Truang hop don vi lam cOng viec la cac to chirc, co quan, don vi khac khong ding trong Don vi quan VT van hanh thuc hien theo mau Giay clang 14 cong tac quy dinh tai Phu lac VII cua Quy trinh nay;

2. Sau khi c6 clang 14 cua dan vi lam cong viec don vi quan ly van

13

hanh phai lap ke hoach de ket hop ding tac va clang 1c)r cat dien voi cac cap dieu do theo quy dinh (trugng hop c6 cat dien). Thong bao va giri lich cat dien cho don vi lam cong viec de trien khai cong viec khi clang 1( , cat dien da dugc phe duyet.

Muc 3 PHIEU CONG TAC

Dieu 22. Phieu cong tac

1. Phieu cong tac la giay cho phep don vi cong tac lam viec \fed thiet bi dien va phong ngixa de khOng xay ra tai nan dien. Phieu cong tac do nguoi dugc giao nhiem vu dia dan vi quan 1)r van hanh cap. Mau Phieu cong tac quy dinh tai Phu luc VIII cua Quy trinh nay.

2. Khi lam viec theo phieu cong tac: a) M6i Phieu cong tac chi dugc cap cho 01 don vi cong tac de lam 01

cong viec. b) Tnrgng hop cap 01 Phieu cong tac cho 01 dan vi cong tac de lam

viec lan lugt nhieu nai (vi tri) ten cong mot &Tong day (16) thi nhUng nai cong lam viec theo 01 phieu cong tac nay phai dugc nhan vien van hanh thuc hien bien phap ky- thuat chuan bi nai lam viec va dugc ngugi cho phep chi dan cho ngugi chi huy truc tiep Ur ban dau khi cho phep dan vi cong tac vao lam viec o nai (vi tri) dau tien;

c) Khi dan vi cong tac di chuyen den nai (vi tri) lam viec tiep theo phai thuc hien cac quy dinh ye di chuyen nai lam viec tai Dieu 40 Quy trinh nay.

3. Cap Phieu cong tac phai thuc hien nhu sau: a) Theo dimg mau, not dung ghi de hieu, du va dimg theo yeu cau cong

viec; cam fay x6a, viet bang but chi, rach nat, nhOe chit; b) Lap thank 02 ban, do Ngugi cap phieu 4 va trip tiep giao cho

Ngugi cho phep mang den hien truOng de thuc hien viec cho phep lam viec. Tai hien truang, sau khi kiem tra du, dung cac bien phap an toan theo yeu cau cong viec va cua Nguoi cap phieu, Ngugi cho phep giao 01 ban cho Ngugi chi huy truc tiep va gift lai 01 ban;

c) Truong hap Ngugi cho phep kiem Ngueyi chi huy trip tiep thi dugc phep lap, sir dung 01 ban song phai tuan thil day du trinh tu. cUa 2 chiric danh nay theo nhiem vu cong viec quy dinh trong Quy trinh nay de dam bao tuyet d8i an toan.

,4. Trong khi tien hanh cong viec, neu r6ng pham vi lam viec thi phai cap Phieu cong tac med.

14

, 5. Sau khi hoan thanh cOng viec, Phieu cong tac dugc tra lai nguoi cap phieu de kiem tra, ltru giir it nhat 01 thang (ke ca nhimg , phieuda cap nhtmg khong thuc hien). Tnreng hop khi tien hanh cOng viec, nett xay ra su co hoac tai nan thi Phieu cong tac phai dugc luu trong ho so dial tra su co, tai nan lao dOng cua don vi.

Dieu 23. Cong viec thkre hien theo Phieu cong tac

Cac cong viec khi tien hanh tai thiet bi dien va vat lieu dien, ,o' gAn hoac lien quan den thiet bi dien va vat mang dien (hoac c the xuat hien dien Ai) > 42 V) phai thuc hien cac bien phap ky thuat chuan bi chi) lam viec va cho phep lam viec tai hien truOng lam theo Phial cong tac bao

1. Lam viec khOng co dien; 2. Lam viec c6 dien; 3. Lam viec o On phAn c6 dien.

Dieu 24. Cac chfrc danh trong Phieu cong tic

1. Phieu cong tac c6 cac chirc danh sau: a) Nguai cap phieu cong tac; b) Ngued cho phep; c) Nguad giam sat an toan dien; d) Nguoi lanh dao cOng viec; e) Ngued chi huy truc tiep;

Nhan vien don vi cong tac. 2. Trong 01 phiL cong tac, 01 nguei dugc pile') dam nhan nhi&u nhdt

la 3 chirc danh Ngtrei, cap phial cong tac, Ngtrei cho phep, Ngtfgi chi huy true tiep hoac,Nguoi cap phial cong tac, Ngueri cho phep, Ngugi giam sat an toan dien (neu co). Khi dam nhan cac chirc danh nay thi phai c dit tieu chuan theo yeu cau cua chirc danh dam nhan.

3. Nhttng ngtroi dugc giao nhiem vu cap phieu cong tac, cho phep, giam sat an toan dien, lanh dao cong viec, chi huy truc tiep hang nam phai dugc huan luyen ye nhting not dung c6 lien quan, kiem tra dat yeu cau va &roc Giam doc, PhO Giam doe ky thuat cap Cong ty (hoac cap Wong duong) ra quyet dinh cong nhan.

Dieu 25. Ngiriri cap Phieu cong tic

1; Ngueei cap Phieu cong tac: phai l nguOi cUa don vi truc tiep van hanh thiet bi dien (luefi dien, nha may dien);

Phai nam yang ve van hanh luOi dien hoac nha may dien do don vi

15

minh truc tiep quan 1/, bit dugc not dung cong viec, dieu kien dam bao an toan dien de de ra du, dung cac bien phap an toan ye dien cho dan vi cong tac;

CO bac 5 an toan dien va dugc cong nhan chirc danh "Ngueli cap phieu cong tac" theo quy dinh tai Khoan 3 Dieu 24 Quy trinh nay, cu the nhu sau:

a) Tai cac nha may dien: do Quan do'c, PhO Quan d6c, Ky thuat vien phan xuang van hanh dien, Twang ca cap phieu cong tac;

b) Tai cac dan vi truyen tai dien: do Giam doc, PhO Giam d'6c Truyen tai dien, Truomg phong va Pho Tnrang phong lcY thuat, DOi truong va DOi pho duemg day, Tram truong, Tram phO, Tru.O.ng ca, Ky thuat vien cap phieu cong tac

c) Tai cac don vi dien lkrc cap quan, huyen: do Giam d6c, Pho Giam cloc ky,thuat, TnrOng phong va PhO Tnrong phong Icy thuat, DOi truong, DOi pho, To truong, TO pho, Truang ca, Ky thuat vien cap phieu ding tac;

d) Tai cac chi nhanh luai dien cao the (hoac cap tuang duang): do Giam dOc, PhO Giam doc ky thuat, Truong phong va Pith TruOng phong ky thuat, DOi truong va DOi phO dueing day, Tram twang, Tram pho, Truemg ca, Ky thuat vien cap phieu cong tac.

2. Trach nhiem cua nguai cap Phieu cong tac a) Cir Nguefi cho phep thuc hien viec cho phep lam viec tai hien

truong (cho phep dan vi cong tac vao lam viec); b) Ghi vao Muc 1 cua Phieu cOng tac, lc/ cap phieu va giao phieu cho

nguOi cho phep, tiep nhan tai phieu va k/ sau khi hoan thanh cong viec; c) Khi giao phieu cho Nguai cho phep phai chi dan nhang yeu c'au cu

the va nhUng yeu to nguy hiem ve an toan dien tai not lam viec de Nguad cho phep huong dan cho dan vi cong tac khi thuc hien viec cho phep lam viec de dam bao an toan.

Dieu 26. Ngtroi cho phep

1. Ngueri cho phep: phai -l nhan vien van hanh lam nhiem vu trong ca true; c bac 4 an toan dien tra len va dugc cong nhan chirc danh "Ngued cho phep" theo quy dinh tai Khoan 3 Dieu 24 Quy trinh nay;

Dugc nguoi cap phieu giao nhiem vu thuc hien viec cho phep lam viec tai hien truong.

Truemg hop O. nai, thiet bi khOng co ngued trgc thuemg xuyen thi ngued cho phep phai la nhan vien true tiep van hanh thiet bi dO (hoac dugc cap co tham quyen cOng nhan la nhan vien van hanh thiet bi do) va phai dugc truong ca (trgc chinh) ca true van hanh cua dan vi (Cong ty Truyen tai, Truyen tai dien khu vgc; Cong ty LuOi dien cao the, Chi nhanh Luoi dien cao the; Cong ty Dien luc/ Dien luc quan, huyen v.v) dieu hanh, chi dan ve thuc

16

trang k6t dien nai (vi tri) lam viec. 2. Trach nhiem cua nguoi cho phep a) Nhan Phieu cong tac tix Ngueyi cap phieu, tiep nhan su dieu hanh,

chi dan dm truOng ca (truc,chinh) ca true van hanh cUa don vi biet day &A tinh trong van hanh thiet bi nai thgc hien cong viec (neu nguoi cap phieu

thong phai la trugng ca, true chinh ca truc van hanh), kiem tra bien phap an toan va thuc hien viec cho phep lam viec tai hien trueng de cho don vi cong tax vao lam viec;

b) Kiem tra, xac dinh tai nai lam viec khong con dien theo quy dinh tai Khoan 2 Dieu 11 Quy trinh nay (truong hop lam viec c6 cat dien);

c) Kiem tra (ho-ac thuc hien neu dugc Nguefi cap phiL giao) viec thuc hien &mg, du cac bien phap an toan tai hien trueng thuc trach nhiem cua

minh de chuan bi ch6 lam viec cho dem vi cong tac, ghi nhOng viec cid lam vao Mgc 2 dm Phieu cong tac;

d) TruOng hop neu nai lam viec co lien quan den thi6t bi cua to 02 don vi quail VT van hanh tra len thi thuc hien theo quy dinh tai Khoan 2 Dieu 45 Quy trinh nay;

e) Kiem tra danh sach nhan vien dan vi cong tac va nguoi giam sat an toan dien (neu co) CO mat tai nai lam viec theo dUng v&i clang k 'Y cila don vi lam ding viec;

f) Chi an nai lam viec, pham vi clugc pile') lam viec, nhimg nai (phan, thiet bi) c6 dien xung quanh va canh bao nhang nguy ca gay ra mat an toan cho toan don vi cong tac va nguoi giam sat an toan dien (neu co) de ho Wet va phOng tranh;

g) Khi lam viec khOng phai cat dien hoc gan nai c6 dien thi chi an nhang yeu to nguy hiem ve an toan dien cho nguoi chi huy truc tiep, nguoi giam sat an toan dien (neu co) va nhan vien don vi cong tac biet de dam bao an toan trong khi lam viec;

h) Ghi tiled gian cho phep b'L dau lam viec, 14 ten vao Muc 2 dm Phieu cong tac. Giao 01 ban Phial cong tac cho nguefi chi huy truc -Wei) sau khi ngubi chi huy truc tiep, nguOi giam sat an toan dien (neu co) da' kiem tra lai va lam nhang bien phap an toan tai hien truOng theo yeu cau, ky vao Mgc 2 cila Phieu cong tac;

i) Thgc hien va ghi vao Mgc 4 cila Phieu cong tac (lieu c6); k) Tip nhan lai Phieu cong tac va nai lam viec do nguei chi huy truc

tiep ban giao khi clan vi cong tac lam xong cong viec; kiem tra not dung ding viec, nai lam viec, viet, lc)", khOa phial vao Mtic 5.2 cila Phieu cong tac, giao tra lai phieu cho nguoi cap phieu.

17

Dieu 27. Nguiri giam sat an toan dien

1. Nhang truong hop phai cu ngued giam sat an toan dien rieng cho don vi cong tac (khong phai la nguesi chi huy trvc flap) bao gom:

a) Don vi cong tac lam cac cong viec (nhu: ne, m6c, co khi v.v) a nha may dien, tram dien va ngued chi huy truc tiep don vi cong tac kh6ng c6 chuyen mon ye dien;

b) Don vi cong tac lam cac cong viec cang, keo day, lay d6 'yang duemg day giao cheo e phia duai va g'an clueing day dang van hanh;

c) Don vi cong tac lam viec O. nhang not dac biet nguy hiem ve diem 2. Ngued giam sat an toan dien (theo quy dinh tai Khoan 1 Dieu nay):

phai c6 bac 4 an toan dien tr& len va dugc cong nhan chirc danh "Nguoi giam sat an toan dien" theo quy dinh tai Khoan 3 Dieu 24 Quy trinh nay;

Dugc don vi lam cong viec hoc don vi quail VT van hanh cir a lam nhiem vu giam sat an toan dien cho don vi cong tac.

3. Trach nhiem cUa ngubi giam sat an toan dien

a) N&rn yang cac quy dinh va nhang yeu c'au ve an toan dien tai not lam viec de giam sat don vi cong tac dam bao an toan ve dien;

b) CO mat tai not lam viec -Ur khi ngueri cho phep thvc hien viec cho phep lam viec;

c) CUng ngued chi huy tnrc tiep tiep nhan not lam viec, kiern tra va thuc hien (neu co) cac bien phap an toan da dU va dung, 14T ten vao Mvc 2 dia. Phieu cong tac;

d) CO mat lien tvc tai not lam viec de lam nhiem giam sat an toan dien (cho den khi hoar' thanh phan nhiem vv dugc phan cong) va khong lam bat cir viec gi khac ngoai nhiem vv giam sat an toan diem

Dieu 28. Ngirtri lanh dao cong viec

1. Ngueri lanh dao cong viec: phai c6 bac 5 an toan dien va dugc cOng nhan chirc danh "Ngued lanh dao cOng viec" theo quy dinh tai Khoan 3 Dieu 24 Quy trinh nay; dugc don vi lam cong viec cir.

2. Trach nhiem cita nguefi lanh dao cOng viec Chiu trach nhiem phi hop hoat dOng diacac don vi cong tac, khi

cong viec do nhieu don vi cong tac cong mot to ch*c hog d6ng dien lvc thvc hien theo cac phieu cong tac de dam bao an toan.

18

Dieu 29. Ngtriri chi huy triyc tiep

1. Ngtrad chi huy true phai c6 b4c,4 an toan dien tra len va dugc cong nhan chirc danh "NguOi chi buy truc tiep" theo quy dinh tai Khoan 3 Dieu 24 Quy trinh nay;

Phai nam yang thei gian, dia diem, noi dung cong viec dugc giao va cac bien phap an toan phit hop vOi yeu cau cua ding viec;

Dugc dun vi lam cong viec cir de thuc hien cong viec. 2. Trach nhiem cita nguoi chi huy true t* a) Chuan bi, kiem tra chat luong cua cac dung cu, trang bi an toan sir

dung trong khi lam viec; kiem tra so bO tinh trang sirc khOe, trang bi phucmg tien bac) ve ca nhan cua nhan vien don vi cong tac;

b) Chi huy moi nguoi den dung dia diem (noi) se lam viec theo ke hoach, chi dan cu the nhiem vu, noi dung cong viec cho cac nhan vien trong don vi cOng tac;

c) Tai hien truUng phai kiem tra, tiep nhan cac bien phap an toan, cac ye'u to nguy hiem, noi lam viec do nguoi cho phep giao va chi dan khi thuc hien viec cho phep lam viec;

d) Kiem tra xac dinh noi lam viec da het dien va lam tiep dat di Ong tai hien truaing (neu lam viec c6 cat dien) sao cho toan bO don vi cong tac nam tron trong vi mg bao ve cua noi dat.

Lam b8 sung cac bien pita') an toan (rao chart, bien bao hoac tin hieu canh bao khac); ghi, 1c2 vao Muc 2 cita Phieu cong tac, chinh thirc tiep nhan noi lam viec va giu Phieu cong tac do nguoi cho phep giao trong thin gian lam viec;

e) Huerng dan va trao dOi, thong nhat ve cac dieu kien an toan, yeu to nguy hiem c6 the dan den tai nan trong khi lam viec v6i tat ca thanh vien caa don vi cong tac. Sau do, phan cOng nhan vien vao vi tri lam viec va c6 mat lien tuc tai noi lam viec de chi huy, ph'Oi hop, kiem tra, giam sat tat ca cac nhan vien cua don vi cong tac trong su'Ot qua trinh lam viec de dam bao an toan.

Ngtrin chi huy truc tiep chi dugc phan cong nhan vien don vi cOng tac vao lam viec sau khi (la nhan dugc su cho phep va Phieu cong tac cua nguoi cho phep, clong thin da kiem tra va thgc hien du, dUng cac bien phap an toan theo yeu cau nhiem vu cong viec.

Neu nhan vien c dau hieu vi pham dAn den mat an toan thi phai nhac nho ngay ho'ac dinh chi cong viec cua nguoi do;

f) Truing hgp noi lam viec co lien quan den thiet bi cua tir 02 dun vi quan b'T van hanh tra len thi thuc hien trach nhiem cita nguoi chi huy truc tiep theo quy dinh tai cac Diem c Khoan 2 Dieu 45 Quy trinh nay;

19

g) Khi co nhan vien don vi cong tac dugc 1:16 sung trong qua trinh lam viec thi phai pile) bien cho nhan vien nay biet nhiem NT, not dung cong viec, dieu kin an toan, cac yeti to nguy hiem, bien phap phong tranh de ho,biet va thtrc hien, dOng tiled bao cho ngueri cho phep biet de ghi vao ban Phial cong tac ma ngueri cho phep

,h) Thirc hien va ghi, Ic)'T vao cac Muc 3 (truang hop clang lam viec phai thay doi Ngueri chi huy trtrc tiep), Muc 4 dm Phial cong tac (neu c);

i) Khi cong viec hoan thanh, chi huy ki6m tra chdt lugng cong viec, thu don dung cu, ve sinh nai lam viec, rut bien phap an toan do don vi cong tac lam (neu c va bien phap an toan nay khi rift di khOng gay ra mat an toan cho don vi cOng tac khac);,cho nhan vien clan vi cong tac ra khoi not lam viec tap ket vi tri an toan, nhac nho nhan vial don vi cong tac khOng toy troy lai khu vtrc lam viec va tiep xUc vai thiet bi.

Thtrc hien nhi-mg quy dinh ve ke't thUc cong viec, ghi, ky vao Muc 5.1 ciia Phial cong tac, trao tra nai lam viec va Phieu cong tac cho ngued cho phep;

k) Trong khi lam viec, ngueri chi huy tnrc tiep phai thut hien viec giam sat ve an toan dien (trir truerng hop quy dinh tai Dieu 27) va an toan chung trong cong viec dOi veri tat ca cac nhan vien da don vi cong tac de dam bao an than. Truerng hop xay ra tai nan phai tim mai bien phap va chi huy nhan vien trong don vi cong tac ciru china nguen bi nan dat hieu qua cao nhat.

Dieu 30. Nhan vien dun vi cong tac

1. Nhan vien don vi cong tac phai la nhixng ngueri dugc ciao tao ye chuyen mon, nghiep vu va hudn luyen ve an toan dien phu hop voi cong viec dugc giao.

2. Cir nhan vien don vi cOng tac a) D6i vori cac don vi trtrc thuOc, cac cong ty con do EVN ridm gift

100% von dieu le, nhan vien dan vi cong tac do nguefi dugc giao nhiem vu trtrc tiep quan ly nhan vien ciia dan vi lam cong viec cir;

b)Si veri cac to chirc, co quan, don vi khac (khong phai la cac don vi don vi trtrc thu'Oc, cac cong ty con do EVN nam gift 100% von dial nhan vien don vi cOng tac do ngueri sir dung lao dOng (ho;dc ngueri dugc nguai sir dung lao dOng uSr quyen) cila don vi lam ding viec

3. Trach nhiem cua nhan vien clan vi cong tac a) Dam bao tot th6 chAt va tinh thdn de lam viec. Chu dOng bao cao

vai ngueri chi huy trtrc tiep tinh tang sire khOe cua minh de dugc giao cong viec phir hop;

b) Phai ndm virng nhang you cdu ve an toan c lien quan den cong viec;

20

c) Tu kiem tra va bao dam day du phuang tien bao ve ca nhan; d) Khi den nai lam viec, sau khi nghe ph/3 bien nhiem vv cong viec,

pham vi dugc phep lam viec, cac yeu to nguy hiem can phong tranh, c6 the hoi lai nguoi chi huy trvc tiep ve nhang not dung chua rO. Khi thay cac dieu kien dam bao an toan de lam viec chua du va dung phai bao cao ngay voi nguoi chi huy trvc tiep de xem xet giai quyet;

e) Ghi ho, ten, thai gian valcf vao Mvc 3 dm Phieu cong tac khi den lam viec va rift kh6i nai lam viec trong truerng hop gang thvc hien cong viec;

f), Chip hanh nghiem nhiem dugc phan cong va co trach nhiem to bao ye de dam bao an toan khi lam viec.

Tir chi thvc hien cong viec khi thy khOng dam bao an toan, neu nguoi chi huy trvc tiep lchOng chap thuL thi bao cao len cap tren de giai quyet;

g) Khong dugc vao cac \lung ma nguoi chi huy trvc tiep cam vao hoc cac viing c6 nguy ca xay ra tai nan;

h) Khi xay ra tai nan phai tim each cUu chin nguoi bi nan. Muc 4

LENH CONG TAC Dieu 31. Lenh cong tac

1. Lenh cong tac la lenh viec ra gidy hoc trvc tiep ra lenh bang loi not (hay qua dien thoai, 1340 dam) de thvc hien cong viec 6 thiet bi dien va vat lieu dien ma Ichong phai thvc hien viec cho phep lam viec nhu:

a) Lam viec o xa nai c6 dien; b) Xir ly sir c6 thiet bi do nhan vien Van hanh thvc hien trong ca trvc,

hoac nhimg nguoi lchac thirc hien duai sv giam sat caa nhan vien van hanh; c) Lam viec a thiet bi dien ha ap trong mot s6 tnxorng hop. 2. Cac dan vi phai c6 quy dinh cu the ve nhting cong viec dugc thvc

hien theo Lenh cong tac quy dinh o Khoan 1 Dieu nay de thOng nhat ap dung trong dan

3. Lenh cong tac viet theo mau quy dinh tai Phu lvc X dm Quy trinh nay.

Truong hap da"c biet, theo yeu cau cong viec phaigiai quyet cap bach ma khong the ra lenh viet dugc thi dugc truyen dat trVc tiep hoc qua dien thoai, ,b0 dam song phai ghi lai va ghi am (neu c6 dieu kien) theo quy dinh tai Diem b Khoan 2 Dieu 33 va Diem a Khoan 2 Dieu 35 Quy trinh nay.

4. Sau khi hoan thanh cong viec Lenh cong tac phai dugc luu gia it nhdt 01 thong (ce ca nhirng lenh cid ban hanh nhung khOng thvc hien). Trueing

21

hop khi tien hanh cong viec, neu xay ra su co hoac tai nan thi Lenh cong tac phai dugc luu trong ho so dieu tra su co, tai nan lao deng cua don

Dieu 32. Cic chirc danh cila lenh cong tic

1. Lenh cong tac c cac chirc danh sau: a) Nguai ra lenh; b) Nguai giam sat an toan dien; c) Nguai chi huy truc tiep (khi to chirc thanh don vi cong tac), Nguai

thi hanh lenh; d) Nhan vien don vi cOng tac. 2. Nhang ngu6i dugc giao nhiem vu ra lenh cong tac, giam sat an toan

dien, chi huy truc tiep, thi hanh lenh hang nam, phai dugc huan luyen ye nhang del dung c lien quan, kiem tra dat yeu cau va dugc Giam doe, Pho Giam doe ky thuat cap Cong ty (ho4c cap tuong duong) ra quyet dinh cong nhan.

Dieu 33. Ngtroi ra lenh cOng tic

1. Nguai ra lenh cong tac: phai dam yang ve van hanh dien hoc nha may dien do don vi minh trixc tiep quan ly, biet dugc nei dung cong viec, dieu kien dam bao an toan dien khi tien hanh cong viec;

Phai co bac 5 an toan dien, dugc cong nhan chirc danh "Nguai ra lenh cong tac" theo quy dinh tai Khoan 2 Dieu 32 Quy trinh nay.

2. Trach nhiem cua ngued ra lenh cong tac a) Khi ra lenh cong tac phai ghi dAy du cac nei dung trong phAn A va

Mgc 1 phan B cua Lenh cong tac (neu lap thanh quyen), truc tiep 4 va giao Lenh cong tac cho Ngueii, chi huy true tier) (ho4c Nguai thi hanh lenh); tiep nhan lai Lenh cong tac, kiem tra, ky sau khi hoan thanh cong viec;

b) TruOng hop ra lenh bang led not truyen dat truc tiep ho4c qua dien thoai, be dam, trugc khi ra lenh cong tac ngued ra lenh phai ghi vao so hocso lenh ding tac nhang del dung sau: nguai ra lenh, ho ten cila nguei chi huy true tiep (ho4c nguai thi hanh lenh), ngued giam sat an toan dien (neu co), nhan vien dm don vi cong tac, dia diem (nai) lam viec, nei dung cong tac, dieu kien tien hanh cong viec, tiled gian bat dau va kat thiac cong viec, &mg thOi danh met mvc de ghi viec kat thiac cong viec.

Neu Nguai ra lenh khOng truc tiep ghi, &roc thi phai thong bao ye not trgc van hanh de ghi vao so lenh cong tac (so nhat 14 van hanh) day du cac nei dung nal a tren va phai ghi am (neu co dieu kien);

c) Phai chi dan nhang dieu c lien quan den cong viec Ira cac yau to nguy hiem tai hien truOng cho ngue(i chi huy truc tiep (ho4c nguai thi hanh

22

lenh), ngued giam sat an toan dien (n6u co) de dam bao an toan khi thgc hien cong viec;

d) Khi thirc hien xong cong viec, Ngubi chi huy trvc tiep (hoac Ngued thi hanh lenh) phai ghi kat qua, th6i gian hoan thanh vao Lenh cong tac hoac so cua minh; bao coo vOi Ngued ra lenh de biet va ghi vao so lenh ding tac theo quy dinh.

Dieu 34. Nguiri giam sat an toan dien

1:Tn.reng hop lam viec theo lenh cong tac, ne'u c6 yeu to nguy him co the dan den tai non dien trong khi lam viec doi ved dan vi cong tac ma ngued chi huy tnrc tiep khOng the giam sat an toan dien dugc thi phai cir

nguad giam sat an toan dien rieng. 2. Nguoi giam sat an toan dien: phai c6 bac 4 an toan dien tra len va

dugc cong nhan chirc danh "Nguad giam sat an toan dien" theo quy dinh tai Khoan 2 Dieu 32 Quy trinh nay;

Dugc dan vi lam cong viec (hoac don vi quail 12 van hanh) dr de lam nhiem vu giam sat an toan dien cho dan vi cong tac.

3. Trach nhiem cua ngued giam sat an toan dien a) Nam yang cac quy dinh va nhimg yeu cau ye an toan dien tai nai

lam viec de giam sat an toan dien cho dan vi cong tac dam bao an toan ye dien;

b) Cimg nguei chi huy trvc,tikD kiem tra va thgc hien (neu co) cac bien phap an toan da va dung, neu lam viec theo lenh viet thi phai 1c2 ten vao Muc 2.2 cila Lenh cong tac;

c) Co mat lien tuc tai nai lam viec de lam nhiem vu giam sat an toan dien (cho den khi hoan thanh nhiem vu dugc phan cong) va khOng lam bat cir viec gi kha.c.

Dieu 35. Nguiri chi huy trip tiep (hoac Ngutri thi hanh lenh) 1. Ngued chi huy trvc tiep, Ngued thi hanh lenh: phai co bac 4 an toan

dien tra len va dugc cong nhan chirc danh "Ngued chi huy trirc tiep", "Ngued thi hanh lenh" theo quy dinh tai Khoan 2 Dieu 32 Quy trinh nay, dugc nguoi ra lenh dr de thuc hien cong viec;

Phai bit thed gian, dia diem, nom yang not dung cong tac dugc giao va cac bien phap an toan phii hop vai yeu cau cfia cong viec.

Truemg hop: i) cong viec lam a nal c6 it yeu to nguy hiem ve an toan dien; ii) lam viec a xa nai c6 then; iii) xir 12 sg co thie't bi do nhan vien van hanh thgc hien trong ca trvc; iv), nguai thvc hien ,cong viec c6 luat lao dngO nghiem va chuyen mon nghe nghiep yang, biet ro nai lam viec va dieu kien an toan thi ngued thi hanh lenh phai c6 bac 3 an toan dien tra len.

23

2. Trach nhiem cua ngtred chi huy true tiep (hoac Nguari thi hanh lenh)

a) Nhan Lenh cong tac tir ngtrai ra lenh. Trtrong hop nhan lenh bang lai not dugc truyen dat tnrc tiep hoac qua

dien thoai, 1)8 dam thi phai ghi am (neu c6 dieu kien) va ghi vao so nhat ,Trong nhat 14,

phai ghi ro: ngtrari ra lenh, ho ten dm ngtrai chi huy truc tiep, ngtrgi giam sat an toan dien (neu co) va nhan vien cua don vi ding tac, dia diem (nai) viec, thai gian bat dau, ket thitc cong viec, (tong thai

danh mot muc de ghi viec ket thitc cong viec. Phai doc k*ST' not dung lenh cong tac, neu thy bit thuang hoac chua ra

thi phai hOi lai ngay ngtrai ra lenh; b) Chuan bi, kiem tra chit luting cua cac dung cu, trang bi an toan sir

dung trong khi lam viec; kiem tra sa bO tinh trang sirc khoe, trang bi phtrang tien bao ve ca nhan cUa nhan vien don vi cong tac;

c) Chi huy moi ngtroi den dUng dia diem (nai) se lam viec theo ke

hoach, chi dan cu the nhiem vu, not dung cong viec cho cac nhan vien trong dan vi cong tac;

d) Kiem tra va thgc hien cac bien pita') an toan de tien hanh cong viec; e) Huang clan va trao doi, thong nhat ve cac dieu kien an toan, yeu to

c6 the dan den tai nan trong khi lam viec vgi tat ca thanh vien cua dan vi cong tac.

Sau do,,phan cong nhan vien vao vi tri lam viec va c6 mat lien tuc tai nai viec de chi huy,,phoi hap, kiern tra, giam sat tat ca cac nhan vien cua

don vi cong tac trong suot qua trinh lam viec de dam bao an toan. Neu nhan vien c diu hieu vi pham clan den mit an toan thi phai nhac

nha ngay ho4c dinh chi ding viec cua ngtrai do; Khi c6 nhan vien don vi cong tac dugc 13,6 sung trong qua trinh lam

viec thi phai pito bien cho nhan vien nay biet nhiem vu, not dung cong viec, dieu kien an toan, cac yeu to nguy hiem, bien phap phong tranh de biet va thgc hien;

g) Ghi nhat 1(5/ ding tac va bien phap an toast vao Muc 2.3 cua Lenh cong tac;

h) Trong khi lam viec, nguari chi huy truc tiep ,phai thgc hien viec giam sat ye an toan dien (frit. tnrarng hop quy dinh tai Dieu 34 Quy trinh nay) va an toan chung trong cong viec doi voi tat ca nhan vien cua don vi cong tac de tuyet doi dam bao an toan. Trtrarrig hop xay ra tai nan phai tim moi bien phap va chi huy nhan vien trong dan vi cong tac ciru china nguari bi nan dat hieu qua cao nhat;

24

i) Khi cong viec hoan thanh, chi huy ki"em tra chdt lugng cOng viec, thu don dung cu, ve sinh nai lam viec, rut bien phap an toan do dan vi cong tac lam (neu co); cho nhan vien dan ding tac ra kh6i nai lam viec

ket vi tri an toan, nhac nhOr nhan vien don vi cong tac khong toy tra lai khu vire lam viec va tiep Vic voi thiet bi. Ghi then gian ket thfic toan 1310 cong viec, k 'y vao Muc 3 dm Lenh cOng tac va bao cho ngueti ra lenh biet;

Di&I 36. Nhan vien dun vi cong tac

1. Nhan vien dan vi cong tac phai la nhimg nguOi dugc ciao tao ve chuyen mon, nghiep vu va huan luyen ve an toan dien phU hop veri cong viec dugc giao, doge nguad ra lenh giao nhiem vu (dr) thirc hien cOng viec.

2. Trach nhiem cua nhan vien dan vi cong tac a) Dam bao tot th6 chdt va tinh than a lam viec. ChU d6ng bao cao

vai nguaii chi huy true tiep tinh trang sire khOe cua minh de dugc giao cong viec phi hop;

b) Phai ndm yang nhfing yeu cau ve an toan c6 lien quan den cong viec;

c) Tg ki'em tra va dam bao day du phucmg tien bao ve ca nhan; d) Khi den nai lam viec, sau khi nghe piths bien nhiem vu cong viec,

pham vi dugc phep lam viec, cac yeu to nguy hiem phai phOng tranh, c6 the hOi lai nguefi chi huy trirc tiep ve nhttng not dung chua r6; neu thay cac dieu kien dam bao an toan khi lam viec chua dU va dung phai bao cao ngay voi ngueri chi huy true tiep de xem xet giai quyet;

e) Ky ten vao Muc 1.2 dia. Lenh cong tac khi den lam viec va rut kh6i nai lam viec (neu c6 trong truOng hgp clang thgc hien cong viec);

f), CI* hanh nghiem nhiem vu dugc phan cong va c6 trach nhiem to bao ye de dam bao an toan khi lam viec. Tin choi thirc hien cong viec khi thay IchOng dam bao an toan, neu nguai chi huy trirc tiep khong chap thuan thi bao cao cap tren de giai quyet;

g) Khong doge vao cac vUng ma nguesi chi huy true tiep cam vao hoc cac \rung c6 nguy ca xay ra tai nan;

h) Khi xay ra tai nan phai tim each dru china ngued bi nan. Muc 5

CHO PHEP LAM VItC Dieu 37. Cho pile') lam viec tai hien truirng Tai hien tnrOng (nai hoac vi tri lam viec) khi thirc hien cho phep lam

viec, nguiyi cho phep phai ding voi nguoi chi huy true tiep va ngueii giam sat an than dien (neu co) kiem tra cac bien phap an toan dd: thuc hien dU va &mg.

25

Sau do, ngued cho phep thuc hien nhimg viec nhu sau: 1. Chi an cho ngueli chi huy trkrc tier), ngued giam sat an toan dien

(neu co), nhan vien don vi cong tac biet pham vi dugc pile') lam viec va nhising phan c6 dien xung quanh (khi cat dien timg phan hoac lam viec khong cat dien).

Neu lam viec c6 cat dien phai sir dung thi6t bi thir dien chuyen dimg phii hop vai dien ap danh dinh cua thiet bi dien can thir (nhu but thir dien, col thir dien v.v.) chimg minh la 'thong con dien a cac phan da dugc cat dien.

2. Kiem tra se) luting va bac an toan cua cac thanh vien dan vi cong tac.

Twang hop don vi lam cong viec cac chirc, ca quan, clan vi khac (ngodi EVN) thi kiem tra so luting nhan vien don vi cong tac, the an toan, cac chirc danh trong phieu phai dimg vOi ban clang k5f cong tac cua dan vi lam cong viec vad don vi quanb'i Van hanh.

3. Sau khi ngued chi huy truc tier) thkrc hien tiep dat di Ong va cac bien phap an toan khac (neu co), yeu cau nguesi chi huy true tiep ghi, ky vao phieu cong tac theo quy dinh va giao 01 ban phieu cho ngued chi huy true tiep.

4. Giao 14i Phieu cong tac, hoc thong bao cho Truong ca (Truong kip, Truc chinh) true van hanh khi da thuc hien xong viec cho phep lam viec va nhung yeu cau cua Ngt.r8i cap phial.

Muc 6 GIAM SAT AN TOAN TRONG THYI GIAN LAM VItC

Di&I 38. Giam sat an toan

1. Giam sat an toan dien va an toan trong khi lam viec d6i vOi tat ca nhan vien dan vi cong tac thuc trach nhiem cua Ngued chi huy tivc tiep.

2. Khi cong viec phai cir Ngired giam sat an toan dien rieng (theo quy dinh tai Diem a Khoan 1 Dieu 27 va Khoan 1 Dieu 34 Quy trinh nay) thi viec giam sat an toan dien cho tat ca dan vi cong tac thuc ve trach nhiem cua. Ngued giam sat an toan dien. Ngirod,

chi huy tut tiep chi phai chiu trach nhiem giam sat ve an toan cong viec d8i voi cac nhan vien don vi cOng tac.

3. TuSi theo nhiem vu cong viec, dieu kien lam viec ngu8i chi huy truc tiep dugc phep clang theii vim lam viec, vira giam sat an toan, nhung phai thuc hien viec giam sat an toan la chinh.

4. Ngued sir dung lao dOng, can 138 an toan dm don vi lam cOng viec c6 trach nhiem kiem tra viec dive hien giam sat dam bao an toan trong khi lam viec.

5. Neu de xay ra mat an toan do 161 khong thuc hien giam sat nhan

26

vien don vi cong tac trong khi tien hanh cong viec thi Nguoi chi huy trgc tiep va ngubi giam sat an toan dien (neu co) phai chiu hoar' toan trach nhiem truck phap luat.

Muc 7 NHVNG BIEN PHAP TO CHCC KHAC

Dieu 39. Nghi giii lao

, 1. Nghi giai lao trong khi lam viec, neu cat dien timg plian hoc khong cat dien thi tat ca moi ngued trong don vi cong tac phai ra khOi pham vi lam viec, cac bien phap an toan phai duoc gilt nguyen. Cac nhan vien van phai chiu su giam sat cila Nguaei chi huy truc tiep.

Sau khi nghi xong, neu chua c m'a't ci:ia nguen chi huy trgc tiep, ngueyi giam sat an toan dien (neu co) thi khOng nhan vien nao dugc toy vao nai lam viec. Ngueri chi huy trgc tiep, nguOi giam sat an toan dien (neu co) chi dugc cho nhan vien vao lam viec khi da kiem tra cac bien phap an toan con du va dimg .

2. Khi nghi giai lao, trong truang hop d4c bit neu bat buOc phai khoi phuc lai thiet bi dang sua chtra thi don vi quan 13'T van hanh co the gong dien lai thiet bi nay khi Net chac chan thiet bi do van dii tieu chuan van hanh, khong con nguoi lam viec, khong gay ra nguy hiem va mat an toan cho dan vi cong tac khac c lien quan (neu co) ma khong phai eh& khoa Phieu ding tac, nhung phai lam cac bien phap nhu sau:

a) Thao cac bien bao, rao chan tam thai (nL co) va cac not (tiep) d'At. Dat 14i rao chan CO dinh va treo bien canh bao "Dimg 14i! Co dien nguy hiem chet ngueyi" thay cho bien chi clan "Lam viec tai day!";

, b) Phai cu ngueyi thuarng trgc tai ch76 de bao cho nguefi chi huy trgc tiep, nguoi giam sat an toan dien (neu co) va nhan vien dan vi cong tac biet la thiet bi da dirge &mg dien, khong dugc phep lam viec a do nira.

Dieu 40: Di chuyen noi lam viec

Neu lam viec lan lugt 45. nhieu nai ten cimg mot &rams day (10), clop duOng day voi 01 phieu cong tac thi phai thgc hien theo cac quy dinh nhu sau:

1. Nhang nai se lam viec phai dugc nhan vien van hanh thgc hien bien phap k'y thuat chuan bi nai lam viec, duoc nguoi cho phep chi dan cho nguOi chi huy trgc tiep tir ban dau khi cho pile') dan vi cong tac vac) lam viec a nai (vi tri) dau tien.

2. Nguei chi huy trgc tier) va toan don vi cong tac chi dugc lam viec C'Y mot nai (vi tri) xac dinh trong so cac nai not ten.

27

, 3. 6 nhfing nai c nhan vien true van hanh thuOng xuyen, khi di chuyen den nai (vi tri) lam viec tiep theo phai do nguth cho phep thvc hien viec cho phep lam viec, &Ong tiled nguth cho phep va nguoi chi huy true tiep phai ghi, cung 1c5f vao Muc 4 dm Phieu ding tac.

4. 6 nhung nai khOng c nhan vien van hanh true thuong xuyen, tai nai (vi tri) lam viec tiep theo thi phai c sir thong nhat gifia dan vi lam cong viec vth dan vi quan 1)% van hanh ye nhang nth (vi tri) se di chuyen trong qua trinh lam Ong viec va phai dugc six chi dan chi tiet tir ban d'au cua nguoi cho phep.

TnrOc khi di chuyen, nguoi chi huy true tiep phai thong bao de nguth cho phep (hoac TruOng ca true van hanh) chap thuan. Khi do, nguoi chi huy trirc tiep va nguoi cho phep (hoac Truong ca trgc van hanh) phai clung tiled ghi vao ban phieu cong tac do hai ben clang giu. Nguth chi huy true tiep chi dugc phan cong nhan vien don vi cong tac vao lam viec tai vi tri lam viec ke tiep sau khi da kiem tra hoac thirc hien dU, dung cac bien phap an toan theo yeu cau cong viec.

5. dm thvc hien "Di chuyL nai lam viec" nhu Khoan 3, Khoan 4 Dieu nay ma khi den nai lam viec tiep theo phai thvc hien cat dien (hoac lam viec khong cat dien neu den nai lam viec tiep theo c cap dien ap khac). Khi do, phai tier' hanh theo Phieu cong tac

A Dieu 41. Nghil het ngay lam viec va bat cau ngay tiep theo

1. Neu cong viec phai keo dai nhiL ngay thi sau, mai ngay lam viec,

dan vi cong tac phai thu don nai lam viec, loi di; rieng Nen bao, rao chan, not (tiep) dat nguyen. Nguth chi huy true tiep phai giao 14i Phieu con g tac va

nhung viec lien quan cho nguth cho phep, &Ong thth hai ben phai ding 1c5T vao phieu.

2. Khi bat dati cong viec ngay tiep theo, nguth cho phep va nguth chi huy true tiep phai kiem tra 14i cac bien phap an toan va thixc hien viec cho phep lam viec, ghi va ky vao Muc 4 cila Phieu cong tac.

3. Twang hop lam viec tren &rang day, nL nai lam viec O. qua xa nai true van hanh va dugc six thong nhat tt'r,tnro.c glib clan vi lam cang viec vOi dan vi quan 15T van hanh thi khi nghi het ngay lam viec cho phep nguth chi huy true tiep dugc giu lai Phieu cong tac, nhung phai thong bao nhfmg viec da lam de nguth cho phep (hoac TruOng ca true van hanh) biet va ghi vao Phieu ding tac (ban do nguth cho phep hoac Truong ca trirc van hanh gift), so nhat k7 van hanh.

Den ngay lam viec tiep theo, nguth chi huy true tiep chi dugc phan cong nhan vien don vi cong tac vao lam viec sau khi kiem tra 14i cac bien phap an toan da du va dung theo yeu cau cOng viec.

28

Dieu 42. Thay dOi ngtroi dm dun vi eking tac

Viec thay dOi nguai (ke ca nguai chi huy trgc tiep) hoc so lugng nhan vien dan vi cong tac do nhang nguai co trach nhiem dm don vi lam cong viec quyet dinh cir theo quy dinh tai Khoan 2 Dieu 30 Quy trinh nay va dOng tiled phai thong bao vai nguai chi huy tivc tiep, nguai cap Phial cong tac.

Trueng hop dia diem (nai) lam viec c6 s6 lugng nguai han the thi phai dugc nguai cap Phieu cong tac dOng y.

Dieu 43. Ket thac cong viec

1. Khi lam xong cong viec, nguOi chi huy truc tiep cho clan vi ding tac thu don, ve sinh nai lam viec va kiem tra, xem xet 10 de hoan thien tat ca nhfx'ng viec c6 lien quan.

Sau do, chi huy thao tiep dat, rut nhfing bien phap an toan do dan vi cong tac lam (neu co) va cho nhan vien dan vi cong tac ra khoi nai lam viec tap ket o vi tri an toan.

, CuOi ding, nguai chi huy -Live tiep dugc ghi, 1(51 vao Muc 5.1 cna Phieu cong tac, trao tra nai lam viec va Phieu cong tac cho nguai cho phop de tiep nhan, kiem tra nai lam viec.

2. Trong qua trinh kiem tra chat luting, neu phat hien thay c6 thieu sot phai sira chfia 10 ngay thi nguai chi huy trgc tiep phai thirc hien theo dUng quy dinh ye "Cho phep lam viec" nhu dOi voi mot cong viec

bat lam b6 sung nay, khOng phai cap Phieu nhung phai ghi theyi

gian bat dau, ket thiic viec lam them vao Muc 4 cda Phieu ding tac. 3. Khi ket thiac cong viec, neu da c6 lenh iliac) tier) dat thi cam moi

nguefi,trong dan vi cong tac to vao nai lam viec va tiep ?die vai thiet bi de lam bat cur viec gi.

Dieu 44 Trao tra not lam viec, khoa phieu va dong dien

, 1. Ban giao trao tra nai lam viec, khoa phieu phai dugc tin hanh truc tiep Oita dan vi cong tac va dan vi quan 1ST van hanh thiet bi.

NguOi chi huy trgc tiep 4 vao Muc 5.1 ket di& cong tac. Nguaei cho phap sau khi kiem tra lai tai nai lam viec khong con tiep

dat di Ong (neu co) dam bao an toan mai dugc ky khod phieu vao Muc 5.2 va thirc hien nhimg viec cda nhan vien van hanh (neu dugc giao), bao cao Truang ca (Truang kip, Trirc chinh) ca trirc van hanh not dung cong viec da thgc hien.

2. Thao tac clung dien vao thiet bi da cat dien khi lam viec dugc thvc hien nhu sau:

29

a) Da khoa Phieu cong tic, neu thi& bi dOng dien c lien quan ,den nhieu dan cong tic thi phai khoa tat ca cac phial cOng tic, dam bao thiet bi se dOng dien tuyet dOi an toan;

b) Nai (thi& by lam viec da cat bin bao va rao chin tam thai khi lam viec (neu co), dat lai rao chin co dinh;

c) Tai nai trvc van hanh cua dan vi quan 1/ van hanh da -did het cac dau hieu bao c don vi cong tic lam viec ten so. do;

d) Dugc phep dOng dien cua cap c quy&I dieu khien thi& bi theo quy dinh.

Muc 8 TRACH NHIEM CUA CAC DON VI CO LIEN QUAN

KHI THVC HIEN CONG VIEC Dieu 45. Trach nhqm cua dun vi lam cong viec, dun vi quail 1ST in

hanh, dun vi Dieu di) 1. DOi vOi don vi lam cong viec:

, a) Lap phuang an thi cong (trong cac truong hop: cong viec dai ngdy, ket cau dien phirc tap, nai lam viec c yeu to nguy hiem cao ve an toan dien v.v) va thOng nhat vOi cac don vi quan 151 van hanh c lien quan ve tien do va to chirc cac clan vi cong tic phi hgp voi cOng viec, lieu kien thvc to cila hien truing cong tic.

b) To chirc cac don vi cong tic, cir nguai ra l'enh cong tic, nguiyi chi huy truc tiep, nguai lanh dao cong viec, ngtthi giam sat an toan dien, nhan vien don vi cong tic theo quy dinh cua Quy trinh nay;

Viec to chirccac don vi cong tic phai thvc hien sao cho yeti mot don vi cong tic khi lam viec theo 01 phial ding tic (hoac lenh cong tic) nguai chi huy true tiep va nguai giam sat an toan dien (neu co) phai giam sat dugc tat ca nhan vien cua clan vi cong tic trong ding mot thai gian, khong gian de dam bao an toan ye dien.

c) Nguai s* dung lao dOng dia don vi lam cOng viec la cac to chirc, co quan, don vi khac (khong phai la cac don vi trot thuloc, cac cong ty con do EVN nam gift 100% von diet' le) phai chiu hoan toan trach nhiem tnrac phap luat ve su dam bao dap irng cac yeu cau dm bac an toan dien doi tong loai cOng viec va nhang chirc danh trong Phieu cong tic, Lenh cong tic theo quy dinh cua Quy trinh nay dugc ghi trong Giay gang ky cong tic.

2. DOi vOi don vi quan 1y van hanh: a) Chu dOng phoi hop vOi dan vi lam cong viec, don vi dieu do trien

khai thuc hien cong viec theo dung ke hoach va quy dinh cua Quy trinh nay de dam bao an toan cho don vi cOng tic;

30

b) Cur nhan vien 4n, hanh thgc hien cac bien phap 1(5/ thuat chuan bi nai viec. Neu thao tac cat dien thuOc cac dun vi quail 1/ van hanh khac thi chu dOng ph& hop ved Dieu dO cat dien theo clung ke hoach, dam bao tiled gian lam viec.

c) Ca'p Phieu cong tac, Lenh cong tac, GiAy ph& hop cho phep; -

Trueng hop thiet bi hoac nai lam viec c 01 dan vi quan I/ van hanh thi dan vi quan 1/ van hanh do chiu trach nhiem ban hanh phieu cong tac.

- Twang hop, neu thiet bi hoac nai lam viec CO tir 02 don vi quail 1/

van hanh tro len thi nguyen tac cir don vi quan 1/ van hanh cap Phieu cong tac, Lenh cong tac, Giay phoi hop cho phep nhu sau:

+ Neu ding viec trvc tiep lam O,thiet bi mot dan vi quan 1/ van hanh, nhung nai lam viec co lien quan den thiet bi cua cac don vi quan 1/ van hanh khac thi dan vi quan 1/ van hanh thiet bi se lam viec la don vi chiu trach nhiem cap Phieu cong tac;

+ Neu cong viec lam O. thiet bi, duong day dang trong qua trinh xay lap ,(chua dua vao van hanh), nhung c quan den cac thiet khac cna nhieu don vi quan 1/ van hanh thi dan vi quan 1/ van hanh thiet bi c thed gian cat dien dai nhat la dun vi cap Phieu cong tac. Trueng hop thoi gian phai cat dien cUa cac dun vi la nhu nhau thi don vi quan I/ van hanh o gan nai lam viec nhat la don vi cap Phieu cong tac, hoac theo chi dinh dm cap ten khi van con nhfing dieu kien nhu nhau;

+ Ngoai don vi quan 1/ van hanh cap Phieu cong tac, (cac) dun vi quan 1/ van hanh c8 lien quan phai cap "GiAy ph& hop cho phep lam viec" (sau day goi la "Giay ph& hop cho phep") va cix nhan vien van hanh lam cac bien phap an toan d'Oi vOi phan thiet bi do don vi minh quan 1/, &Ong thbi phai chiu trach nhiem ye viec da lam du, dung cac bien phap an toan nay;

Trong truong hop nay, "Gik, ph& hgp cho phep" cua 01 dan vi quan 1/ van hanh dugc lap thanh 03 ban, trong do 01 ban don vi quan 1/ van hanh cap "Giay phoi hop cho phep" va giao 02 ban cho nguad chi huy trgc tiep de ngued chi huy trgc tiep giao lai cho nguei cho phep cUa don vi quan 1/ van hanh cap phieu cong tac 01 ban;

"GiAy ph& hop cho phep" chi dugc phep giao nhan tai hien trueng ved ngued chi huy trvc tiep khi cac bien phap an toan do dun vi quan 1/ van hanh da thvc hien dU, Eng de ngued chi huy tryc tiep tiep tuc ding voi ngued cho phep cua don vi cap Phieu cong tac thgc hien viec cho phep lam viec.

Mau "Giay ph& hop cho phep" thgc hien theo mau quy dinh tai Phu luc IX cua Quy trinh nay.

d) Cir ngued cho phep la nhan vien van hanh (lam nhiem vu trong ca trvc) de thgc hien viec cho phep lam viec tai hien trueng;

Ngued cho phep cua dun vi cap phieu cong tac chi dugc k/ cho phep

31

va giao "PhiL cong tac" cho nguai chi huy trgc flap khi: - Da kiem tra va c6 dU, dUng cac bien phap an toan dm don vi minh; - Da nhan du cac "Giay ph6i hop cho phep" cua cac dan vi quan 1ST

van hanh khac c6 lien quan den cong viec; e) Cu ngued giam sat an toan dien theo Diem b, c Khoan 1 DiL 27

hoc Diem a Khoan 1 Dieu 27 Quy trinh nay theo de nghi dm don vi lam cong viec.

f) Treo the danh d'Au tong don vi cong tac tren so do van hanh cua b6 phan trgc tiep van hanh thiet bi (nai) tien hanh cong viec.

TruOng hop don vi quan 1ST van hanh la don vi lam cong viec phai thuc hien nhu sau:

- Lap phuang an cu the, chi tit khi trie'n khai ke hoach cong viec; - Phan dinh ro trach nhiem thgc hien cua tirng chirc danh trong "Phi6u

cong tac", "Giay phoi hop cho phep" (nL co) va cac b6 phan trong don vi c6 lien quan an ding viec de thgc hien dung theo quy dinh cua Quy trinh nay, dam ba.o tuyet doi an toan.

3. D6i vai don vi Dieu d6 a) Lap, duyet phuong th*c van hanh, lich cat dien ding tac tuAn

(thang), thong bao va lich cat dien da dugc duyet cho cac don vi quan 1ST

van hanh c6 lien quan den ding viec; b) Chi huy thao tac cat dien, ban giao thiet bi cho don vi quan 15/ van

hanh theo dung quy dinh va thai gian dugc phe duyet; c) Treo the danh dau dan vi cong tac tren so d6 van hanh theo s6

luting don vi quan VT van hanh dang 14 cat dien; d) Khoi phuc lai thi& bi khi don vi quail 1ST van hanh da khod het phiL

cong tac, giao tra nai lam viec va phai yeu cau don vi quan 15T van hanh kiem tra, xem xet ky Wang, dam bao tuyet doi an toan.

Chuo'ng V CAC BIEN PHAP AN TOAN KHAC

VA BIEN PHAP AN TOAN Kill LAM VIEC TREN CAO

Muc 1 CAC BIEN PHAP AN TOAN KHAC

Ditu 46. MO phap an toan khac

Thirc hien theo quy dinh tir Dieu 46 an Dieu 57 trong QuychuAn ky thuat quoc gia ve an toan dien (QCVN 01:2008/BCT), dugc trich dan tai Phu luc XI cua Quy trinh nay.

32

Muc 2 BIEN PHAP AN TOAN KM LAM VIEC TREN CAO

Dieu 47. Quy dinh chung 1. Nguai lao Ong tam tuy6n, nguai lao dOng lam viec theo hop d8ng

lao Ong co thai han dirai 12 thang, hoc sinh cac truang va cac trung tam dao tao nghe ,dien trong qua trinh thucstap khi lam viec tren cao phai dugc huAn luyen, kiem tra quy trinh dat yeu cau va phai tuan theo nhang quy dinh trong Muc 2 Chucmg V Quy trinh nay.

2. Nhang nguai lam viec vci thi6t bi dien tren cot (hoac vi tri dat thi6t bi c the bi roi, nsai) c d8 cao tir 3,0 m so vai mat dat (mat bang) tra len phai &roc co quan y to ket Wan du sire khoe lam viec tren cao.

Truang hop, lam viec a &rang day (hoac vi tri,dat thik bi) co cao

so vai mat dat ten 50 m thi truck khi lam viec phai kiem tra lai sire khoe cua

nguai lao dOng. Khi chuAn bi treo cao, nguai chi huy true tip phai hoi so bc) tinh trang

sire khoe cUa nguai treo, neu binh thuang mei dugc treo len cao; trong qua trinh treo len cao hoac dang lam viec neu thay sire khoe khong dam bao hoan thanh tong viec thi phai bao cho nguai chi huy true tiep biet.

3. Nguai lao Ong tarn tuy'L, hop clang ngAn han, hoc sinh cac truang va cac trung tam dao tao nghe dien trong qua trinh thuc tap chi dugc lam viec tren cao trong truang hop khong c dien.

4. Nguai lam viec tren cao, neu thy bien phap an toan chua du, &mg voi quy trinh an toan thi c ,quyen bao cao ved nguai ra lenh. Neu chua duce giai quyet day &I thi co quyen khong thirc hien va bao cao voi cap tren.

5. Nguai lam viec tren cao, quAn ao phai dimg quy dinh ve trang phut, gon gang, tay ao bu8ng va cai cue, doi ma an toan cai quai, di giay an toan, deo day an toan, mug ret phai mac du am; khong mac day deo an toan vac. nhUng 1D0 phan di &Ong hoac nhang vat khOng chac char', de gay, de tuOt; khong mang theo dien thoai de sir dung.

Dieu 48. Nhiing quy dinh ve lam viec tren cao

1. Nhang truang hop khong dugc phep lam viec tren cao: a) Nguai chua dugc co quan y to ket Juan du sire khOe lam viec tren

cao, dang O'm dau hoac da sir dung cac chAt kith thich, do u8ng co con truce khi lam viec;

b) Khi c gio tad cap 6 (39-49 km/h) hay trai mua tonang hat hoac c giong set, trix nhang truang hop dac biet do cap c tham quyen yeu cAu.

2. Khi dang lam viec tren cao, cam cac hanh vi sau:

33

a) Sir dung cac chat kich thich, do u6ng c6 con, not chuyen, dua nghich, sir dung dien thoai;

b) Dua dung cu, vat lieu len cao hoac tir tren cao xu6ng bang cach tung, nem, mang vac dung cu, vat lieu nang len cao ding vai nguai;

c) Cho vao tili quan, do cdc dung cu, vat lieu de de phong rai xu6ng dau ngugi khac.

3. Khi lam viec tren cao phai thvc hien ntrix sau:

a) De dung cu lam viec vao ch6 chac chan hoac lam mac treo vao cot, sao cho khi va dap mann khOng roi xuOng dat;

b) Khi dua dung cu, vat lieu len cao hoac ha xu6ng phai dung day trtrc tiep hoac qua puly de keo len, ha xuOng, ngugi a dual phai giix mot dau day va khong dimg gan sat vi tri lam viec tinh theo phuang thang dung;

c) Chi dugc mang theo ngugi nhung dung cu nhe nhu kim, tu6c-na- vit, m6-18t, bila con v.v, nhung phai Ong trong bao chuyen dimg.

4. Khi treo len cot be tong hoac mai nha: a) Treo len cot be-tong ly tam khong c6 bac treo phai dung thang mot

d6ng, hai don*, guoc treo, ty leo chuyen dung. Khi treo len cot, len thang phai treo tir tir, chac char', tap trung tu tugng; cam vua treo vixa not chuyen, sir dung dien thoai, nhin di ch8 khdc. Khi dung thang mot dong, hai &ng, guoc treo chuyen dung hoac ty leo phai co quy trinh sir dung rieng cho cdc loai phuang tien nay. Cam treo cot bang dugng "day neo cot";

b) COt do mOng be-tOng trvc tiep dung xong khi be tong chua dil thei gian lien ket theo quy dinh ve xay dung thi khOng dugc treo len bat xa, sir;

c) COt do mong be-tong trtrc tiep, sau khi be tong du thgi gian lien ket theo quy dinh ve xay ding mai dugc treo len de thao day chang, khi treo phai sir dung day deo an toan;

d) Lam viec tren nhung mai nha trop, d6c phai c6 bien phap an toan de tranh trust nga. Nguai phu trach, can Ix) k5/ thuat phai c6 trach nhiem theo dOi, nhac nha.

Dieu 49. Nhirng quy dinh ye thang di Ong

1. Quy dinh ve ket cau va chat lugng thang di &Ong: a) Thang di dOng la loai thang lam bang tre, go, sat v.v. v4t lieu dung

lam thang bang tre, go phai chac chan va khO; b) Chieu rang chan thang it nhat la 50 cm; c) Khoang cach giita cdc bac thang deu nhau va khOng las hon 45 cm; d) Bac thang khong dugc &mg bang dinh, bac dau va bac cu6i phai c6

chat;

34

e) Thang bang tre phai lay day thep buOc, xoan chac chan a hai d'au va giva thang;

f) Khi not thang phai dung dai bang sat va bat bu-long, hoac dung nep bang go, tre cirng op hai dau cho not dai it nhat 1,0 m va diing day thep de neo xoan that chat, dam bac) lchOng lung lay, xOc xech;

g) Thang phai clang dugc sir dung, khong bi mot, oan, cong khi lam viec tren do;

h) Phai thuang xuyen kiem tra thang, neu thay chua an toan thi phai sira chila lai ngay hoac loci bo.

2. Quy dinh ve lam viec vai thang di Ong: a) d nhirng ch8 khong c dieu kien bac gian gido thi cho phep lam

viec tren thang di dOng; b) Chieu dai cua thang phai thich hop vai dO cao can lam viec; c) Phai c mot nguoi giir chan thang, ten nen da hoa, xi mang, gach

tran, nhan ,phai lot chan thang bang cao su hoac bao tai mit de khoi trugt. Tren nen dat phai khoet lOm dat dui chan thang;

d) Dirng lam viec tren thang it nhat phai each ngon thang 1,0 m va phai dimg bac ten bac duai;

e) Trong dieu kien binh thuang, thang phai dkrng vai mat phang thang clung sao cho khoang cach,tir chan thang den mat phang dung dung thang bang % chieu dai thang. DOi vai thang di dOng khong deo day an toan vao thang;

) Khi dung thang vao cac xa dai, ting tron phai dUrig day de buOc dau thang vao vat do;

j,) Cam mang theo nhimg vat qua nang len thang, treo len thang ding mot 16c hai va &mg tren thang de dich chuyen tir vi tri nay sang vi tri khac.

Dieu 50. Quy dinh ve sir dung day deo an toan 1. Hang ngay, nguoi lao dOng truac khi lam viec tren cao phai to kiem

tra day deo an Wan minh bang each deo vao rOi buOc day vao vat chac chan a duoi dat va chum chan lai nga ngtrai ra phia sau xem day c hien tugng bat thirang gi khong.

2. Phai ban van tot day deo an toan, lam xong phai cuOn lai gon gang, IchOng de ch6 am thap ma phai treo len hoac de ch6 cao, kho rao, such se.

3. Day deo an toan phai dugc thir 06 thang 01 ran, bang each treo trong luting hoac thiet bi thir day an toan chuyen &mg. Trong luting thir dOi vai day Cu la 225 kg, day mai la 300 kg, thai gian thir 05 phut, tnroc khi sir dung phai

35

kiem tra khoa, nick, duang chi v.v xem c6 bi ri hoac dirt khOng, neu nghi nga thi phai thir' trong hrong ngay.

4. Sau khi thir day deo an toan phai ghi ngay that, trong lugng,thir va nhan xet tot, xau vao theo doi thir day an toan. Ding thai clanh dau (dan tem) vao day a thir con dat tieu chuan, chi day nao danh dau mai dugc sir dung. Nhang day deo an toan khOng sir dung dugc phai dugc lap bien ban va hay b6.

5. T6, doi san xudt c6 trach nhiem quail ly chat the day deo an toan. Neu xay ra tai nan do day bi dirt, gay moc hoac do khong thir dung ky han thi to truing, dOi truing, quan doe phan xuang (hoac cap tuang &rung) va can bO phu trach an toan cua dun vi phai chiu hoan toan trach nhiem.

Chuang VI BIEN PHAP AN TOAN }CHI LAM VIEC THIET BI DIEN

Dieu 51. Bi0 phi') an toan khi lam viec cac tram bien ap 1. Nguai vao tram bien ap mot minh phai CO bac 5 an toan dien, ding

thai phai c6 ten trong danh sach da dugc lanh dao don vi quan lY van hanh duyet.

2. Nhan vien don vi cong tac vao tram lam viec phai co bac 2 an toan dien tra len, neu lam cong viec a thiet bi dien thi nguai chi huy true tiep phai c6 bac 4 an toan dien tr& len (trir nhung ding viec neu tai Diem a Khoan 1 Dieu 27 Quy trinh nay).

3. Khi lam cong viec soca chir'a, lap dat thiet bi hoac diL chinh rale, dung ho phai c6 hai nguai. Nhang nguai nay chi dugc lam viec trong pham vi cho phep va dam bao khoang each den phan c6 dien theo quy dinh tai Khoan 2 Dieu 9 Quy trinh nay.

4. Can b6 quan 1Y, nhan vien van hanh, sua chira, xay dung vao tram lam viec, kiem tra deu phai ghi vao so nhat kyr van hanh tram nhiing cong viec da lam.

5. Nguai lam nhiem vu kiem tra cac thik bi dien ha ap phai CO bac 3 an toan dien tra len.

6. Nguai di kiem tra hoac ghi chi s6 ding his) dien mot minh khOng dugc vugt qua rao chan hoac toy sua chila, lap (tat thiet bi.

7. Cac nhan vien lam viec, kiem tra trong tram phai chd nhung thiet bi dang van hanh bi mat dien, hoac da cat dien nhung chua tiep dat, hoac thiet bi du phOng dat trong tram c6 the dugc khoi phuc lai dien bat cif lac nao; cam lam viec cac thiet bi do.

8. Neu ma cira luai kiem tra thiet bi dang van hanh thi phai c6 hai nguai, nguai giam sat phai c6 bac an toan dien to bac 4 tra len, nguai kiem

36

tra tix bac 3 tro len va phai quan sat ky ph'an mang dien de dam bao khoang each an toan. Khi c6 giong set khOng dugc kiem tra cac tram ngoai tr6i.

9. Cam dan ngued la vao tram, d6i ved nhung ngoai vao tham quan, nghien ctru phai do hanh dao dan vi quan 1./ van hanh (hoac ky thuat vien) hu6ng dan. Vao tram lam viec, tham quan deu phai ton trong not quy cua

tram, nhung ngued vao lan d'au phai dugc huong dan ti mi. 10. Chia khod tram phai ghi ten rO rang Ira dugc guar' ly theo not quy

rieng. Moi khi rai khoi tram deu phai khoa va kiem tra xem cira da khoa chat chua.

, 11. Can cur nhiem vu cong viec va ket cau thiet bi timg tram tren

he thong dien cac don vi c6 quy dinh cu the de thuc hien cong viec trong tram theo phieu cong tac hay lenh cong tac.

Dien 52. Lam viec voi thiet bi dien cao AI) Wong cat dien 1. Can dr vao mire d6 nguy hiem, nhung cong viec lam khong cat dien

dugc chia lam hai loai chu yeu nhu sau: a) Nhang viec lam ben ngoai rao chan hoac ngoai khoang cach an toan

vii thiet bi dang co dien; b) Nhung viec lam i g'an hoac ten cac 1)8 phan va thiet bi dang c6

dien nhung khong c6 kha nang the chan, gay nguy hiem cho ngoai lam viec. 2. Nhting cong viec lam ben ngoai rao chan co dinh hoac phan dien

ha tip dm tram thi don vi cong tac khOng phai c6 Phieu cong tac nhung phai c6 Lenh cong tac va sau khi lam xong phai ghi vao so nhat 1c3'T van, hanh nhung cong viec da lam. NguOi lao thong khong trinh do an toan ve dien vao tram lam viec phai co ngoai giam sat an toan dien theo quy dinh tai Khoan 1 Dieu 27 va Khoan 1 Dieu 34 Quy trinh nay.

3. Nhang,cong viec cho phop mcY tura luoi an toan khi thiet bi van 06 dien phai c6 phieu cong tac va dam bao khoang cach an toan theo quy dinh bao

a) Lary mau da.'u may bien tip (chil 3'T kiem tra tiep dat v6 may truac); b) Tien hanh loc dLT a nhung may bien tip 16n dang van hanh; c) Kiem tra d8 rung dm thanh tai bang sao thao tac; d) Do dung dien bang am-pe kim; e) Lau sir each dien tux 35 kV tra xu6ng bang dung cu chuyen dung da

dugc kiem tra va thu nghiem dinh kY theo &mg quy dinh hien hanh. 4. Nhirng cong viec lam o Khoan 3 Dieu nay chi dugc tien hanh khi

cac bO phan mang dien o phia tnr6c mat hay o phia ten dau, nguei lam viec phai dimg ten nen nha hoac gian gido chac char', cam ngoai lam viec dimg lom khom.

37

Dieu 53. Sir dung kim do ctromg di) dong dien 1. Ngueyi sir dung &Ong ha kieu kim a do cfrang d6 &mg dien phai

dugc huan luyen ye cach do. , 2. Neu do thiet bi dien cao ap thi phai dugc hudn luyen

each doc chi so, giam sat an toan, do hai nguai c6 bac 4 an toan dien tra len va thuc hien theo phial cong tac hos4c lenh cong tac.

3. Chi dugc dung ampe kim de do demg dien o thiet bi dien cao ap tir 22 kV tra xuong va phai c6 ampe met lap ngay tren kim. Khi do phai stir dung gang tay each dien, Ung each dien hoc ghe cach dien tucmg irng voi cap dien ap cUa thiet bi. Vi tri do phai thuan tien va khoang cach gitra cac pha khong duai 0,25 m.

4. Phd.n each dien khi sir dung kim do .6 thiet bi dien cao ap phai trong tiled han thir nghiem. Khong sir dung kim do neu phan each dien a phia mieng kim bi nirt,

5. Khi do clang dien o thief bi dien ha ap, dugc pile') do 6. truang hop

ampe met d4"t rieng, nguai do khong can mang thiet bi an toan, neu do tren cot thi phai tuan theo quy dinh lam viec tren cao cua quy trinh nay. Khi do phai dfirng tren nen nha hoc gia do chac chan, khong dimg tren thang di d6ng de do.

6. Do xong, kim do dien phai de trong hOp va bao quail nal kho rao.

Dieu 54. Nhirng bien phap an toan khac

1. Cdm lam viec a tren cac gian gido tam thai hoc tren thang di d6ng khi ben dual c6 thiet bi c6 dien cao ap (mac dU da dam bac) khoang each an toan). ddt. 2. Cdm lam viec o cac doan cap ngam hay day an not khong lam tiep

Dieu 55. Quy dinh ve cong viec co cat dien nhung cho phep khong not dAt

1. NhQng ding viec nhu do, kiem tra dien tra not ddt, do cac th6ng so cua thiet bi ma bat bu6c phai khong dugc tiep dat, cong CO 14i tiep dat cua

thiet bi hoc dm he thong not dat toan tram thi dugc phep tam thai thao go' day not dat trong thai gian tien hanh cac cong viec nay.

2. Nhang ding viec neu tai Khoan 1 Dieu nay phai co Phieu cong tac va ghi rO iliac, nOi dat nao, do nhan vien van hanh nao thgc hien.

38

pieu 56. Nheng quy dinh de" dam bao an toan khi lam viec tren may cat

1. Khi tien hanh cong viec ten may cat c6 1