r. h. scales co., 73 years of wheel experience! · 243 these wheel simulators for dual wheels are...
TRANSCRIPT
238
PASSENGER & LIGHT TRUCK WHEELS
WHEELS AND RIMS • HUB COVERS
Team up with Hayes . . .Hayes Wheel has the most complete line ofwheels available-for import or domestic cars;compact or full size; front or rear drive; light truckand trailer applications.
Safety and performance inspection-Whenever you replace a tire, check for wheel damage that might require replacement.
Snow wheel convenience-Mount snow tire on a set of their own “snow wheels” . . .save time and effort andchangeover time.
Compact spare replacement-For the motorist who rolls in on a compact spare and wants the security of a full-size tire and wheel.
Plus-Wheels for all types of trailers . . utility and cargo trailers, boat trailers, horse trailers and travel trailers.
R. H. SCALES CO., 73 YEARS OF WHEEL EXPERIENCE!
All Weather Wheel CoversTop quality durable wheel covers for use with snow tires and wheels, or to dress up your passenger car or light truck.
Heavy Duty ABS ConstructionSpecially formulated ABS to endure extreme temperatures. High quality brushed silver finish.
Sold individuallyStyles may vary
850713S - 13” Directional Silver
85414S - 14” 8 Spoke Silver
85415S - 15” 9 Spoke Silver
32116SHD - 16” 10 Spoke Silver
32117SHD - 17” 10 Spoke Silver
HUB COVERS
239
The rim supported the tire. There are two types of rims: a single piece rim (tubeless-some16 inchsingle piece rims are either tubeless or tube-type) and a multi-piece rim (tube type). A SINGLE PIECERIM is a continuous one-piece assembly. A MULTI-PIECE RIM is an assembly consisting of a baseand either a side ring or a side and lock ring depending on the type. A DEMOUNTABLE RIM does nothave a center disc and is clamped onto a cast spoke wheel.
TUBELESS DEMOUNTABLE RIM (SINGLE PIECE)
TUBE TYPE DEMOUNTABLE RIM ASSEMBLY((MULTI-PIECE)
SPACER BANDUsed on rear cast spoke wheels, the spacer band holds the two rims apart and provides proper dualspacing for the tires.
RIMS
A combination of a rim and a disc permanently attached to the rim and attached to the hub by studsand nuts.
TUBE TYPE DISC WHEEL ASSEMBLY
TUBELESS DISC WHEEL(2 mounting systems - see below)
Tubeless Disc Wheels Can Have a:
DISC WHEELS
WHEELS AND RIMS
STEEL TRUCK WHEELS & RIMS
Or
Hub-piloted wheelsuse two-pieceflange nuts
Non-chamferedbolt holes identifya hub-pilotedwheel.
Stud-pilotedwheels use nutswith ball seat.
Inner cap nutsare used to locateinner dual in dualwheel assembly
Chamfered boltholes identify astud-pilotedwheel
Cross section of typical dual assemblywith stud-pilotedwheels (Both righthand and left handthreads)
Outer cap nutsInner cap nuts
Outer dualInner dual Outboard brake drum
StudsHub
CHARACTERISTICS
CHARACTERISTICS
Cross section of typical dualassembly with hub-pilotedwheels (Both right hand and lefthand threads)
Two-piecefingernuts
Hub pilotsOuter dualInner dual
Outboard brake drum
Studs
Hub
240
STUDS AND NUTS FOR DISC WHEELS
RIM CLAMPS, STUDS AND NUTS FOR DEMOUNTABLE RIMS
WHEELS AND RIMS
TRUCK WHEEL ATTACHING PARTS
Typical examples of studs, nuts and clamping plates used with disc wheels are illustrated in this section.A typical stud (Fig.1) used with in-board brake drums has a thread on both ends, a shoulder with two flats,and is longer from the shoulder on the one end with an unthreaded section. The flat surfaces of theshoulder fit into the recessed outer surface of the hub to keep the stud from turning. The smooth portionis long enough to fit through the brake drum, and is then held in place by a back or jam nut (Fig.2). Foroutboard brake drums a serrated stud with threads on one side is typically used (Fig. 3).
On front stud mount wheels, an outer cap nut (Fig.4) or (Fig.6) is used. On stud mount rear dualwheel applications, the inner wheel is held in place by an inner cap nut (Fig.5) and the outer wheel byan outer cap nut (Fig.6).
For hub mount wheels which pilot from the center hole, flange nuts are used on both the front and rearwheels. One-piece flanged cap nuts (Fig.7) are used on light truck and medium truck applications. Heavytrucks and buses and some light trucks use a two-piece flange nut or swiveling lug nut (Fig.8) when hubmount wheels are used. Some light trucks use a clamping plate (Fig.9) and 90degree cone nuts (Fig.10)for both the front and rear wheel. Light trucks which use single wheels on the front and rear axle require90degree cone nuts or 60 degree cone nuts (Fig.11), depending on the truck manufacturer.
The stud for cast spoke wheels (Fig.12), threaded on both ends, is installed in a threaded hole at theend of a spoke. The front clamp (Fig.13) and a rear clamp(Fig.14) hold the demountable rim in posi-tion with studs and nuts (Fig.15). A clamp for a three-spoke wheel with two stud holes is shown in(Fig.16).
241
Alcoa is America’s largest manufacturer of forged alu-minum wheels. Aluminum wheels are manufacturedeither in a “casing” or “forging” process. Alcoa producesforged aluminum wheels. Forged aluminum wheels arestronger than cast or steel wheels.
The forging process of an Alcoa wheel starts with an hotaluminum ingot, shaped under pressure, then machinedand polished to perfection.
Alcoa wheels are not just for 18 wheelers. Alcoa nowoffers a full-line of forged aluminum wheels for lighttrucks, sport vehicles, RV’s and vans.
Light truck owners know the quality of Alcoa wheels andwant Alcoa wheels and accessories on their truck.
15”, 16”, & 19.5” light truck wheels available.
LIGHT TRUCK WHEELS
ALUMINUM WHEELS
The right wheel for your mounting needs.Whether your fleet runs on ball seat or hub-piloted wheels... oryou’re considering super weight saving wide base wheels...you can get the Alcoa wheels you need right now. That’sbecause only Alcoa makes aluminum wheels for every majormounting type.
Stud or hub pilot 22.5” & 24.5” truck wheelsavailable.
Stud or hub pilot 22.5” wide base wheels available.
NO-MAR RIM GUARD
Wheel caps, lug nuts, & nut covers in stock now - see pg. 242
HEAVY TRUCK WHEELS
WHEELS AND RIMS
Fits 10 Hole 22.5, 24.5 Disc WheelsPrevents impact wrenches from leaving damaginggrooves in aluminum, chrome or painted truck wheels.Made of flexible high impact nylon.
MFR. NO. DESCRIPTIONNMRG NO-MAR Rim Guard
PART #600Installation Tool for Hub CoverSystems 076185, 076188 and
077188
242
PART # DESCRIPTION4-4 fits 8 23/32”pilot diameter, 4 notches on back rim of cap4-4H same as above, has cutout in center of cap for hubodometer4-5 fits 8 23/32” pilot diameter, 5 notches on back rim of cap4-5H same as above, has cutout in center of cap for hubodometer4-6 fits 8 23/32” pilot diameter, 6 “evenly spaced” notches on back rim of cap4-6N same as above, 6 notches on back rim of cap unevenly spaced
FRONT HUB CAPS, SNAP IN (for stud & hub pilot, steel and aluminum 22.5” & 24.5” duals)
PART # DESCRIPTION2S 22.5” & 24.5”, 10 on 11.25” or 10 on 285.75mm bolt patterns2SH same as above, has cutout in center of cap for hubodometer44US 17.5”, 19.5”, 20”, 22.5”, 6 on 8.75” bolt pattern94 19.5”, 20”, 22.5”, 10 on 7.25” bolt pattern64UE 16” & 16.5”, 8 on 6.5” bolt pattern (simulated lug nut covers)64UEOE same as above, with cutout for 4WD axle (simulated lug nut covers)
FRONT HUB CAPS, LUG MOUNTED (for light, medium, & HD trucks, steel & aluminum duals)
PART # DESCRIPTION5US 22.5” & 24.5”, 10 on 11.25” or 10 on 285.75mm bolt patterns5USH same as above, has cutout in center of cap for hubodometer5U8 19.5”, 22.5”, & 24.5”, 8 on 275mm bolt pattern45US 17.5”, 19.5”, 20”, 22.5”, 6 on 8.75”, bolt pattern95 19.5”, 10 on 7.25” bolt pattern
65UE 16” & 16.5”, 8 on 6.5” bolt pattern (simulated lug nut covers)
REAR AXLE COVERS (derby style for lt., medium, & HD trucks, steel & aluminum duals)
LIGHT & HEAVY TRUCK WHEEL ACCESSORIES
PART # DESCRIPTIONNC1000 1” hex stainless steel- older GMC light trucksNC1000T 1” hex stainless- later model GMC light trucks (taller for longer stud)NC1012D 1 1/2” hex stainless- “Budd” wheels w/ double cap nuts (stud pilot)NC1014 1 1/4” hex chromed stainless- “Dayton” style rim clamp nutsNC1016F 1 1/16” hex flanged stainless- 84+ Ford light trucksNC1018F 1 1/8” hex flanged stainless- GMC, Ford, Dodge 1 pc. flanged nutNC1030F 30mm hex flanged stainless- GMC medium duty (19.5”)NC1033F 33mm hex flanged stainless- 10h unimount (hub pilot) wheelsNC1041 41mm hex stainless- medium duty import trucks w/ double cap nuts (stud pilot)NC1078F 7/8” hex flanged stainless- older GMC, late model Ford light trucksH150 (=L004) 1 1/2” hex Alcoa “Hug-A-Lug” spring loaded cover- “Budd” wheels (stud pilot)H180 (=L005) 35mm hex Alcoa “Hug-A-Lug” spring loaded cover- Unimount wheels (hub pilot)H181 33mm hex • 31mm High Cover ChromeH188 33mm threaded with inner threaded clamp ring (for 076188, 077188 kits)
LUG NUT COVERS
PART # DESCRIPTION076188 1 steer axle cap & 10-L005 nut covers for unimount front wheel077188 1 drive axle cap & 10-L005 nut covers for unimount rear wheel076155 1 steer axle cap & 10-L004 nut covers for “Budd” front wheel077155 1 drive axle cap & 10-Loo4 nut covers for “Budd” rear wheel
COMPLETE ALCOA HUB COVER SYSTEMS
PART # DESCRIPTION9 universal 8 1/2” axle end cover, use with 5/8” drive flange studs9H same as above, has cutout in center of cap for hubodometer11 universal 8 1/2” axle end cover, use with 3/4” drive flange studs11H same as above, has cutout in center of cap for hubodometer
REAR AXLE END HUB COVERS (for stud and hub pilot, steel and aluminum 22.5” & 24.5” duals)
USE KA4-4
243
These wheel simulators for dual wheels are manufactured by Kaper II, Inc., one of the original pioneers inthe industry, and are made of “bright” polished no. 304 stainless steel. Limited Lifetime Warranty
PART # WHEEL SIZE/BOLT PATTERN STYLE** APPLICATION1602F-UE 16”/16.5”, 8 on 6.5” 2WD lug mt. front or tag axle, F, Ch, Dg. (2 covers)1604-C35 16” 8° on 6.5” lug mounted fits Accu-Ride ‘01+ Chevy NBS 29588,
29361 (x45477)1604-EZN 16”, 8 on 6.5” 2WD, 4WD OTL Universal, Fits most applications1604-4F92 16”/16.5”, 8 on 6.5” 4WD, OTL Ford (92+), custom fit1604-6P 16”, 6° on 222mm lug mounted fit medium duty import trucks (FS28860)1610-EZN 16”, 10° on 7.25” over the lug Ford (88+), custom fit, Super Duty 29223ULT 16” 8° on 170mm lug mounted fits Accu-Ride ‘02 & earlier Ford Super Duty29579-ULT 16”, 8° on 6.5” over the lug Ford E-350 w/ 8 rd. cutouts on wheel29583ULT 16” 8° on 170mm lug mounted fits Accu-Ride ‘03 plus Ford Super Duty
29837ULT 17” Dual 8 on 170 mm 2WD, 4WD OTL 05+ Ford F350
1954I 19.5 6° on 222mm lug mounted fits Accu-Ride #295061954-10N-1 19.5”, 5/10 on 7.25” lug mounted P-30 & Class A motorhomes1958-4ULTG 19.5”, 8 on 275mm over the lug GM/Ford w/ 30mm hex lugs1958-4ULTI 19.5”, 8 on 275mm over the lug IH, Freightliner, Ford w/ 32mm hex lugs29186ULT 19.5 x 6 8 on 225mm lug mounted fits Accu-Ride #29186 ‘99-0229584ULT 19.5 x 6 8 on 225mm lug mounted fits Accu-Ride ‘03+ Ford Super Duty29736ULT 19.5 x 6.75”, 8 on 225mm over the lug ‘99 Ford SuperDuty29839ULT 19.5 x 6 10 on 225mm 2WD, 4WD OTL 05+ Ford SuperDuty
2252FC-82 22.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27404, fronts2252RC-82 22.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27404, rears2254C-7510 22.5x7.50”, 10 on 11.25” lug mounted fits Accu-Ride #27403
2452FC-82 24.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27406, fronts2452RC-82 24.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27406, rears
** the “Style” Column refers to how the simulator is mounted on the wheel; “lug mount” simulators are actually heldon by the lug nuts of the vehicle, while “over the lug” (OTL) simulators are held on by a series of lock nuts thread-ed on to the end of the vehicle’s studs
DUALLY WHEEL SIMULATORS
Kaper’s unique and patented ring mount system, can be used on both dual wheels & rims, and is installedusing an expanding and locking ring inside the wheel’s rim contour. Front styles have a highly positive off-set (like a front “Budd” type) and the rear style has a less positive offset to imitate a rear drive or trailerapplication. Security screws hold the cover in place.
PART # DESCRIPTION175F 17.5” rims/wheels, front style, mod style175R 17.5” rims/wheels, rear style, mod style195F 19.5” wheels, front style, mod style195R 19.5” wheels, rear style, mod style225F 22.5” rims/wheels (including wide base), front style, 2HH225R 22.5” rims/wheels (including wide base), rear style, 2HH
RING MOUNT SIMULATORS
WHEEL SIMULATORS & COVERS
“Eazzy On” covers are for single wheel applications and are made of highly polished stainless steel. Theyattach using a 360 degree retention ring, that is sure to hold on all applications.
PART # DESCRIPTION16EZN 16” wheels, universal for trucks/trailers (except Ford F-350)
16” “EAZZY ON” WHEEL COVERS
244
Now, you can convert your 2WD or 4WD 3/4 or 1 ton truck with single wheels to a factory style dual wheeltruck. This adapter kit will add stability to any former single wheel truck to aid in plowing, load carrying,towing, etc. However, it will not increase the vehicle’s load carrying capacity (total GVW), DO NOT OVER-LOAD!!!!
Kits include two aircraft aluminum spacers and sixteen grade 8 heat treated 9/16” studs & nuts. All kits arecustom machined for specific applications, so every kit fits safely and precisely.
PART # DESCRIPTION3000D 94’ - up Dodge3001 86-98 Ford3001A Pre 86 Ford - pre 88 Chevy3002 88-00 Chevy3003 01 + Chevy NBS3099 99 + Ford SD 8-170mmREMA Tool to bore out hooks on 7529186
Note: Stock rear kits only, all front kits special order, approximately one week lead time.
REAR DUAL WHEEL ADAPTER (CONVERSION) KITS
DUAL WHEEL ADAPTER INSTALLATIONTypical 2 or 4 wheel drive
Please Note: Use only Hayes, & Accu-Ride steel or Alcoa Aluminum wheels.The use of any other wheel will void manufacterer’s warranty!!
NEW!
EXISTING AXLEHUBFRONT
TIRE & WHEEL
EXISTING AXLEHUBREAR
TIRES & WHEELS
4.12”
3.00”
WHEEL ADAPTERS
245
RUBBER/ POLYMER PRODUCTS
Buyers heavy duty rubber splash guards are produced with all rubber for greater strength and longerwear. These splash guards are available in a variety of sizes to fit most trucks and trailers.
Heavy Duty Rubber Splash Guards 1/4" ThickPART NO. STYLE SIZEB2018LSP Plain 20" L x 18" W
HEAVY DUTY RUBBER SPLASH GUARD - DUAL WHEELS
Designed for unusually heavy loads. Built to OSHA standards. Convenient molded handhold & chaineye.
PART NO. DESCRIPTION SIZEWC2556A Heavy duty rubber wheel chock 7” W x 8” L
HEAVY DUTY RUBBER WHEEL CHOCK
Wheel chocks are made of tough, reinforced rubber. Resistant to sun, salt, oil and acid. Practicallyindestructible .
PART NO. DESCRIPTION SIZEWC1468 Rubber wheel chock 8” W x 5” x 6”WC1467 Rubber wheel chock 5” W x 5” x 6”WC1086 Rubber wheel chock 9” W x 8” x6”
with metal eye bolt
RUBBER WHEEL CHOCK
WC1468
Buyers thermo-flex fender guards are produced with a high - density poly-mer developed specifically for strength and stability. These splash guardsare designed with a flare to confirm to the truck or trailer body.
Polymer Fender Splash GuardsPART NO. COLOR SIZEB1018PPB Black - Small 18L x 10WB1237PPB Black 37L x 12W
THERMO FLEX FENDER GUARD - SINGLE WHEELS
WC1467 WC1086
246
Rema Tip Top’s famous RAD100 Series Radial Repair Units, another member of Rema’s BlueBonding SystemTM, revolutionized radial tire repair. With far better adhesion power than most otherrepair systems and an extensive range of sizes, Rema RAD100 Series Radial Repair Units can becold or hot vulcanized, making them an ideal choice for tire dealers, retreaders or fleets. RAD100Series repair units are specially constructed to absorb and disperse high flex forces. When used withSpecial Cement BL, the center-over-injury repair units become a dynamic part of any radial tire.
STOCK NO. SIZE PLIES UNITS/BOX CAR TRUCKRAD-110 2x2 3/4” 1 20 •RAD-112 2 3/8x4 1/8” 1 10 •RAD-114 3x4 3/4” 1 10 •RAD-120 4 7/8x3” 2 10 •RAD-122 6 7/8x3” 2 10 •RAD-124 8 1/2x3” 2 10 •RAD-125 4 1/2x4 7/8” 3 10 •RAD-126 2 7/8x10 1/2” 3 10 •RAD-128 2 7/8x13 1/8” 3 10 •RAD-135 5 1/4x7 1/4” 4 10 •RAD-140 7 7/8x3 15/16” 3 10 •
RAD100 SERIES RADIAL REPAIR UNITS
PATCHES, PLUGS & ACCESSORIES
TIRE REPAIR MATERIAL
Designed specifically for everything from nail hole to section repairs of bias ply tires, Rema’s PN BiasPly Tire Repair Units, another member of Rema’s exclusive Blue Bonding SystemTM, can be used witheither a cold or hot vulcanizing process and will deliver reliable and durable adhesion, regardless howthey’re applied. Because they have a high temperature resistance, PN Repair Units are ideal forretreading systems. With high tensile nylon cords for maximum patch strength and exceptional flexibili-ty, easy-to-install unidirectional PN Repair Units allow users to perform even the largest sectionrepairs with complete confidence. PN Repair Units are available in a variety of sizes (passengerthrough giant earthmover tires) and larger PN units (agricultural, logger, skidder, flotation and OTRapplications) are pre-contoured to provide a better, more reliable fit in the tire.
PN Units For Tread & Shoulder Injuries/Passenger, Light Truck & TruckTiresSTOCK NO. SIZE PLIES UNITS/BOXPN-0 1 1/4” 1 50PN-1 2 1/2” 1 30PN-2 3 1/4” 2 20PN-3 4” 2 10PN-4 5 3/4” 2 10PN-5 6 1/2” 4 10PN-6 9 1/4” 6 10PN-7 11 3/4” 6 10PN-8 13 1/2” 6 5
PN BIAS PLY TIRE REPAIR UNITS
Rema Tip Top’s most popular repair unit, Minicombi sets a new standard in one-piece repair units,making complete permanent nail hole repairs on passenger, performance, light truck and truck tiressimple and easy. Part of Rema’s renowned Blue Bonding SystemTM, Minicombi features a metal pilotguide for easy installation and seating. Specially developed for tread area punctures on both radialand bias ply tires, Minicombi should be used with Special Cement BL.
STOCK NO. OLD STOCK NO. DESCRIPTION UNITS/BOXA3 670 1/8” Minicombi A3 50A6 673 1/4” Minicombi A6 40A6-R 673RP 1/4” Minicombi A6 8A-36 KIT 676 Minicombi Combo Kit (25 A3s & 20 A6s) 1B8-MC 680 5/16” Minicombi B8 20B10 684 3/8” Minicombi B10 18CC-3 6456 1/8” Carbide Cutter 1CC-6 6451 1/4” Carbide Cutter 1CC-8 6459 5/16” Carbide Cutter 1CC-10 6450 3/8” Carbide Cutter 1BL-5 Special Cement BL, 50gm Tube 1BL-8 Special Cement BL, 8 oz. Brush Top Can 24See Cutters, Buffing Tools, Rasps & Finishing Stones sections for specially designed Combi Cutters.
REMA MINICOMBI REPAIR UNITS & ACCESSORIES
247
STOCK NO. SIZE PLIES UNITS/BOXPN-30 10” 6 3PN-31 14” 6 3PN-32 18” 8 2PN-33 22” 8 2PN-34 26” 10 1PN-35 30” 12 1PN-36 34” 14 1
PN UNITS FOR TREAD & SHOULDER INJURIES/OTR TIRES
PATCHES, PLUGS & ACCESSORIES
TIRE REPAIR MATERIAL
STOCK NO. SIZE PLIES UNITS/BOXPN-40 7” 4 2PN-41 8 3/4” 6 2PN-42 10 1/4” 8 2
PN UNITS FOR TREAD, SHOULDER & SIDEWALL INJURIES/INDUSTRIAL TIRES
STOCK NO. SIZE PLIES UNITS/BOXPN-30S 10” 6 3PN-31S 14” 6 3PN-32S 18” 8 2PN-33S 22” 8 2PN-34S 26” 10 1PN-35S 30” 12 1PN-36S 34” 14 1
PN UNITS FOR SIDEWALL INJURIES/OTR TIRES
Designed specifically for agricultural and OTR tire repairs, Rema’s new PN 50 Series Bias Ply RepairUnits are ideal for tread area and sidewall section repairs. PN 50 Series Repair Units feature a 900
cord angle for greater compatibility with the flexing action of tires under load. And the highly flexiblePN 50 Series units are much easier to install. In addition, PN 50 Series Repair Units feature a ply-endcover strip to eliminate cord breakout. Each size is available in two ply levels, providing outstandingcoverage and allowing the repair technical to select the right unit for the job. “S” units are designed forsidewall injuries only.
STOCK NO. SIZE PLIES UNITS/BOXPN-50 9 1/2” 4 3PN-50+ 9 1/2” 6 3PN-52 14” 6 3PN-52+ 14” 8 2PN-54 19” 8 2PN-54+ 19” 10 2PN-56 26” 10 2PN-56+ 26” 12 2PN-56S 26” 10 2PN-56S+ 26” 12 2PN-58 32” 12 1PN-58+ 32” 14 1PN-58S 32” 12 1PN-58S+ 32” 14 1PN-60 39 3/4” 14 1PN-60+ 39 3/4” 16 1
PN 50 SERIES BIAS PLY REPAIR UNITS
248
The only patch you’ll ever need for most nail hole repairs on radial on radial or bias passenger, per-formance, light truck or truck tires. Part of Rema’s exclusive Blue Bonding SystemTM, Universal Patchis specially reinforced for outstanding durability and reliability, and formulated to provided maximumflexibility. The non-directional, center-over-injury Universal Patch is available in boxes or convenientand cost effective pails.
STOCK NO. DESCRIPTION UNITS/BOXUP-3 1/8” Universal Patch 100UP-6 1/4” Universal Patch 50UP-8 5/16” Universal Patch 50UP-6P 200 UP-6 Patches in Pail 200/PailUP-8P 150 UP-8 Patches in a Pail 150/PailBL-8 Special Cement BL 8oz. Brush Top Can 24
UNIVERSAL PATCH
PATCHES, PLUGS & ACCESSORIES
TIRE REPAIR MATERIAL
Specially designed for small nail hole repair on radial passenger, performance, light truck and trucktires, Rema’s RX Radial Reinforced Patches are perfect for tread area and sidewall repair.
STOCK NO. DESCRIPTION UNITS/BOXRAD-00 1 3/16” Round RX Radial Reinforced Tread Area Repair 10RAD-0 1 9/16” Round RX Radial Reinforced Tread Area Repair 10RAD-1 2 3/4”x1 5/8” Non-Reinforced Radial Tread & Sidewall Repair 10
RX RADIAL REINFORCED PATCHES
Rema Tip Top’s extensive line of high quality tire tube patches are renowned for their easy applicationand extraordinary effectiveness. With sizes for motorcycle, passenger, light truck, medium/heavy truck,agricultural and small off-the-road tire tube repairs, Rema Tip Top Tube Patches feature Rema’s famil-iar double-scalloped feathered edge to ensure perfect bonding and complete vulcanization, and aunique rubber compound that allows the patch to stretch evenly and equally in all directions uponinflation, assuring a reliable bond and minimal bulging in any service condition. All in convenient dis-penser packs.
Refer to size chart on pages 3 & 4 for actual patch sizes.
STOCK NO. SIZE UNITS/BOX ATV CAR TRUCK TRACTOR OFF
ROAD0 1 1/4” Round 100 • •1 1 1/2” Round 30 • •2 1 3/4” Round 30 • •3 2” Round 30 • • •4 3” Round 30 • • • •5 3 3/4” Round 10 • • •6 4” Round 10 • • •7 3x1 1/2” Oval 30 • •7A 4x1” Oval 30 • • • •7B 6x2” Oval 10 • • •7C 7 1/4”x3 1/2” Oval 10 • • •7D 9x4 3/4” Oval 10 • • •8 9x2 1/4” Oval 10 • • •
REMA RED EDGE TUBE PATCHES
TUBE PATCHES
249
Rema’s non-flammable Rim/Bead Sealer stops minor seal leaks between the tire bead and rim, partic-ularly on truck, agricultural and OTR tires.
STOCK NO. DESCRIPTION960 Rim/Bead Sealer, 32 oz. Brush Top Can
REMA RIM/BEAD SEALER
TIRE REPAIR MATERIAL
Tire Talc makes tube and liner installation a breeze, helps eliminate tube and liner damage caused bypinching, folding, friction and sticking, and also eliminates chaffing of tubes on repair units.
STOCK NO. DESCRIPTION63 Tire Talc, 1lb. Shaker Top Canister
REMA TIRE TALC
Developed especially for tire and retreader shop air tools, Rema Moisture Guard Pneumatic Tool Oilkeeps them running smoothly and helps eliminate damaging moisture.
STOCK NO. DESCRIPTION77 Moisture Guard Oil, 16 oz. Can
REMA MOISTURE GUARD PNEUMATIC TOOL OIL
VULCANIZING FLUIDS, CEMENTS & LIQUID PRODUCTS
Repair Sealant is designed for use around the edges of reair units, overbuff areas and on porousinnerliners. Rema Repair sealant creates an airtight seal, improving the integrity and reliability ofrepairs.Rema’s Tire mounting paste applies with a brish, and will not discolor or corrode aluminum or alloywheels, won’t freeze or harden, reduces wear and tear on mounting equipment, and dries quickly sothe tire won’t spin on the wheel.
STOCK NO. DESCRIPTION76 Repair Sealant, 16 oz. Brush Top Can76G Repair Sealant, 1 Gallon Can75 Universal Mounting Paste, 7.7 lb. Container73 Brush for Mounting Paste
TIRE REPAIR SEALANT & MOUNTING PASTE
76 75
73
76G
250
Proper skiving and stitching are important elements of any section repair. Rema Tip Top’s line of highquality knives and durable ball bearing stitchers are built to last.
STOCK NO. DESCRIPTION UNITS/BOX6007 Skiving Knife, Flexible Round Point Blade 16008 Skiving Knife, Tapered Point 16017 Skiving Knife, Narrow 6” Blade 16018 Skiving Knife, Standard 6” Blade 16019 Rubber Scissors, 8” 16004 Ball Bearing Stitcher, 1x1/8” 16005 Ball Bearing Stitcher, 2x1/4” 16006 Ball Bearing Stitcher, 2x2” 1
REMA SKIVING KNIVES & STITCHERS
TIRE REPAIR HAND TOOLS
TIRE REPAIR MATERIAL
VULCANIZING FLUIDS, CEMENTS & LIQUID PRODUCTS
The lynch pin of Rema’s exclusive Blue Bonding System,TM Special Cement BL creates a nearly inde-structible bond between tire and repair unit. Specially formulated for use in all types of tire repair, spe-cial accelerator solution that can be used equally well in both cold and hot vulcanizing.
STOCK NO. DESCRIPTIONBL-5 Special Cement BL, 50gm TubeBL-8 Special Cement BL, 8 oz. Brush Top CanBL-32 Special Cement BL, 32 oz. CanBL-G Special Cement BL, 1 Gallon Can6020 16 oz. Aluminum Cement Dispenser With Brush Top
REMA SPECIAL CEMENT BL
Rema Tip Top’s Cold Vulcanizing Fluid, designed for use with our line of tube patches as well as valvepatches and rubber-based valves, is available in a wide-range of sizes, from 25gm tubes up to onegallon containers.
STOCK NO. DESCRIPTION203 Cold Vulcanizing Fluid, 8 oz. Brush Top Can204 Cold Vulcanizing Fluid, 32 oz. Can205 Cold Vulcanizing Fluid, 1 Gallon Can
REMA COLD VULCANIZING FLUID
Possibly the most important step in any tire repair is cleaning the innerliner around the injury. RemaTip Top’s Pre-Buff Cleaner dissolves mold-release lubricant and loosens other contaminants so thatthey can be removed using Rema’s Rubber Scraper, creating a clean, solid surface for any repair unit.And Rema’s Pre-Buff Cleaner is the perfect solution for crayon marks, grease and oil smears, and rub-ber skid marks on equipment. Available in easy-to-use aerosol cans or bulk containers.
STOCK NO. DESCRIPTION70 Pre-Buff Cleaner, 16 oz. Spray Can71 Pre-Buff Cleaner, 32 oz. Spout Top69 Pre-Buff Cleaner, 1 Gallon Can28 Rubber Scraper27 Replacement blades for Rubber Scraper6020 16 oz. Aluminum Cement Dispenser With Brush Top
REMA PRE-BUFF CLEANER
251
Designed to roughen nail holes for reliable repairs, Rema’s line of Radial Hand Rasps are made ofhigh quality, tempered carbide steel and are mill cut for exacting sharpness and diameter. Rema’s Awlis designed for probing the probing the injury to determine the extent of damage.
STOCK NO. DESCRIPTION UNITS/BOX190 Awl 16003 Radial Hand Rasp, 1/4” for Super Radial Anchor Seal Kit 16003T Radial Hand Rasp, 1/4”, for Truck Tires 1
REMA RADIAL HAND RASPS & AWLS
TIRE REPAIR MATERIAL
Rema Tip Top’s line of mill cut Bias Stickleback Hand Rasps are available in a wide range of sizes,and are made of high quality, tempered steel. Handles made of durable, high impact plastic.
STOCK NO. DESCRIPTION UNITS/BOX199 Bias Stickleback Rasp 10-R 4 1/2” Stickleback Rasp 11-R 6 3/4” Stickleback Rasp 12-R 9” Stickleback Rasp 13-R 13” Stickleback Rasp 1
REMA BIAS HAND RASPS
Sometimes a buffing wheel just won’t do. Rema’s quality Hand Buffers keep their edge repair-after-repair. Easy to clean blades are available in replacement packs.
STOCK NO. DESCRIPTION31 Hand Buffer, Straight Steel With Replacement Blade32 Replacement Pack, 10 Straight Steel Blades
REMA HAND BUFFERS
TIRE REPAIR HAND TOOLS
Encapsulated Wire Brushes- run at 5,000 rpm maximum- are perfect for removing rubber from aroundsteel cords, while the Rotary Wire Brush helps remove scorched rubber from buzzouts.
STOCK NO. DESCRIPTION6055 2” Encapsulated Wire Brush (5,000 rpm max.)6056 3” Encapsulated Wire Brush (5,000 rpm max.)6057 3” Rotary Wire Brush (5,000 rpm max.)6053 1/4” Drive Arbor for 6057 Rotary Wire Brush
WIRE BRUSHES/WHEELS
CUTTERS, BUFFING TOOLS, RASPS & FINISHING STONES
STOCK NO. DESCRIPTION6425 2” Rotary OTR Tire Gouge, 1/2” Arbor33 1/4” Drill Arbor For Mounting Buffing Wheels34 2 1/2” Diameter Tungsten Carbide Round Nose Buffing Wheel, Fine Grit788 Two 2 1/2” Diameter Tungsten Carbide Round Nose Buffing Wheels, Fine Grit,
Mounted Back-to-Back on Arbor6333 2” Diameter Tungsten Carbide Round Nose Buffing Wheel
MISCELLANEOUS BUFFING & CUTTING TOOLS
252
Industry standard all-rubber snap-in valves for tubeless bias or radial passenger and light truck tires.Comes complete with plastic dome-type valve cap and valve core.
STOCK NO. DESCRIPTION TR NO.T13R* 1 1/4” Long Snap-In Valve, .453” rim hole 413T14R 1 1/2” Long Snap-In Valve, .453” rim hole 414T18R* 2” Long Snap-In Valve, .453” rim hole 418T23R 2 1/2” Long Snap-In Valve, .453” rim hole 423T15R 1 1/4” Long Snap-In Valve, .625” rim hole 415T25R 2” Long Snap-In Valve, .625” rim hole 425437 Motorcycle Valve, .327” rim hole 430VS911R Tornado/Eldorado Clamp-in Valve 417VS902VL Oval Base Clamp-in 416VLLE600R 1 1/4” rubber/brass snap-in, .453” rim hole 600hpLE602R 2” rubber/brass snap-in, .453” rim hole 602hp•available with chrome sleeve also
SNAP-IN TUBELESS PASSENGER/LIGHT TRUCK TIRE VALVES
TIRE VALVES AND HARDWARE
Today’s high performance custom wheels need special valves. Quality Custom Wheel Clamp-InTubeless Tire Valves fit both .453” and .625” rim holes, and are recommended for all air pressure lev-els above 30 psi. Comes complete with dome-type valve cap and valve core.
STOCK NO. DESCRIPTION TR NO.VS944/5 1 7/16” Long Custom Wheel Clamp-In Valve 416
CUSTOM WHEEL CLAMP-IN TUBELESS TIRE VALVES
Rema’s Tubeless Tire Valve Extensions are perfect for those hard-to-reach passenger and light trucktire valves. Both plastic and metal valve extensions are available.
STOCK NO. DESCRIPTION UNITS/BOX686P 3/4” Plastic Valve Extension 50688P 1 1/4” Plastic Valve Extension 50689P 1 1/2” Plastic Valve Extension 506241M 3/4” Metal Valve Extension 106241G 1 1/4” Metal Valve Extension 10
TUBELESS TIRE VALVE EXTENSIONS
High quality straight brass Clamp-In Valves for tubeless truck and bus tires. All with standard 5/8” sidehole mount. Complete with fork-type valve cap and valve core.
STOCK NO. DESCRIPTION TR NO.T501R 1 21/32” Long Clamp-In Brass Valve 501T500R 2 5/32” Long Clamp-In Brass Valve 500T570R 3 9/32” Long Clamp-In Brass Valve 570T571R 3 17/32” Long Clamp-In Brass Valve 571T572R 3 29/32” Long Clamp-In Brass Valve 572T573R 4 17/32” Long Clamp-In Brass Valve 573T574R 5” Long Clamp-Brass Valve 574462 Replacement Rubber Grommets RG-15
CLAMP-IN BRASS TRUCK VALVES
253
Designed for tubeless truck and bus tires mounted on aluminum wheels with 9.7mm (.389”) valveholes, these high quality Clamp-In Valves come in a wide range of metric sizes.
STOCK NO. DESCRIPTION TR NO.VS902VL Oval Base Clamp-In Valve 416VS543 59mm Clamp-In Valve 543VS543D 60mm Clamp-In Valve, with 600 bend 543DVS544D 73mm Clamp-In Valve, with 600 bend 544DVS545D 91mm Clamp-In Valve, with 600 bend 545D
METRIC CLAMP-IN TRUCK VALVES
TIRE VALVES AND HARDWARE
Specially designed for use on drop-center aluminum truck wheels, these high quality single-bend steelvalves have a 5/8” bottom hole, and come complete with dome-type valve cap and valve core.Replacement rubber grommets also available.
STOCK NO. DESCRIPTION TR NO.VS946R 4 3/4” Long Aluminum Wheel Valve 509VS879R 5 1/2” Long Aluminum Wheel Valve 510523 Replacement Rubber Grommets RG-46
ALUMINUM WHEEL TRUCK VALVES
Solid brass Valve Extensions are ideal for those hard-to-reach tubeless truck and bus tire valves.Extensions come complete with fork-type valve cap and hex-nut base.
STOCK NO. DESCRIPTION402 2 1/4” Long Truck/Bus Valve Extension403 3 1/8” Long Truck/Bus Valve Extension404 4 1/8” Long Truck/Bus Valve Extension405 5 1/4” Long Truck/Bus Valve Extension
TRUCK/BUS TIRE VALVE EXTENSIONS
Brass clamp-in valve allows rapid filling of air or liquids used to add weight and improve the capabili-ties of agricultural and OTR tires. Both units feature fast flow valve cores, and come complete withfork-type valve caps.
STOCK NO. DESCRIPTION TR NO.VS714AR Agricultural/OTR Clamp-In Valve, large bore, fast flow valve core 618-AVS921AR Agricultural/OTR Clamp-In Valve,2 31/32” long with 650 bend, 621-A
fits .625” rim hole, fast flow valve core
AGRICULTURAL/OTR CLAMP-IN VALVES
Top quality Large Bore OTR Spuds, tubeless and tube-type, come in the most popular configurations.
STOCK NO. DESCRIPTION TR NO. UNITS/BOXVS977 Large Bore Spud, tubeless SP2 53022 Large Bore Spud, tube-type, SP4000 5
with bridge washer and hex nut3024 Large Bore Spud, tubeless, for rims SP3 5
with 1/2” female NPT valve holes
LARGE BORE OTR SPUDS
254
Developed especially for front wheels and outside duals, and usable with 3020, 3022 and 3024 spuds,each unit comes complete with all necessary fittings, large bore valve core and fork-type valve cap.
STOCK NO. DESCRIPTION TR NO. UNITS/BOX3025 3 1/8” Long Large Bore Single Bend J650 1
Swivel Valve, 800 bend, 1 5/64” vertical height3026 4 11/16” Long Bore Single Bend J651 1
Swivel Valve, 900 bend, 1 17/64” vertical height3027 3 1/8” Long Large Bore Single Bend J654 1
Swivel Valve, 600 bend, 1 5/64” vertical height3028 3 1/8” Long Large Bore Single Bend J655 1
Swivel Valve, 740 bend, 1 5/64” vertical height3029 8 3/4” Long Large Bore Single Bend J660 1
Swivel Valve, 900 bend, 1 57/64” vertical height3030 7 1/2” Long Large Bore Single Bend J4000-7 1/2 1
Swivel Valve, 900 bend, 1 5/64” vertical height3031 9” Long Large Bore Single Bend J4000-9 1
Swivel Valve, 900 bend, 1 5/64” vertical height3032 29 1/2” Long Large Bore Single Bend J4000-29 1/2 1
Swivel Valve, 900 bend, 1 5/64” vertical height3033 2 1/2” Long Large Bore Single Bend J4000-2 1/2 1
Swivel Valve, 900 bend, 1 5/64” vertical height3034 4 1/2” Long Large Bore Single Bend
Swivel Valve, 900 bend, 1 5/64” vertical height J4000-4 1/2 1
LARGE BORE AGRICULTURAL/OTR SINGLE BEND SWIVEL VALVES
TIRE VALVES AND HARDWARE
High quality Valve Cores include standard Short Cores, Heat-Resistant Cores, Long Cores and LargeBore Cores.
STOCK NO. DESCRIPTION TR NO. UNITS/BOX100AA Short Valve Core C1 100100HA Short Heat-Resistant Valve Core C1 1003001 0.302” Large Bore Valve Core, 32-T C2 10
VALVE CORES
An often overlooked way to keep tires properly inflated, we offer a wide-range of standard and largebore valve caps.
STOCK NO. DESCRIPTION TR NO. UNITS/BOX643 Fork-Type Standard Metal Cap VC2 100655 Dome-Type Standard Metal Cap VC3 10039 Dome-Type Standard Plastic Cap VC8 1000658 Skirted Dome-Type Metal Cap VC3 100632 Skirted Dome-Type Heat-Resistant Metal Cap VC3 1008971 Fork-Type Large Bore Valve Cap VC6 108971H Hex Head Large Bore Valve Cap VC7 10
VALVE CAPS
Specially-designed Valve Pullers for passenger and light truck applications.
STOCK NO. DESCRIPTION5407 Solid-Bar Pull-Through Valve Puller5409 Big Yank Slip-On Valve Puller
VALVE PULLERS
255
STOCK NO. DESCRIPTION7213 Passenger/Light Truck Pressure Gauge: 10-50 psi low pressure, durable nylon
indicator bar reads in one pound increments, high impact chrome body, complete with pocket clip and deflator pin
7215 Truck Pressure Gauge: 20-120 psi high pressure, durable nylon indicator bar reads in two pound increments, high impact chrome body, complete with pocket clip and deflator pin
7275/7285 Dual Head Truck Pressure Gauge: 10-120 psi high pressure, 6” extension on all-chrome body, durable nylon indicator bar reads in two pound increments, complete with metal ring
7230 Agricultural Pressure Gauge:5-45 psi for air/liquid ballast filled tires, durable nylon indicator bar reads in one pound increments, high impact chrome body, gauge specially designed to allow pumping out and oiling to prevent corrosion, complete with pocket clip
7278 Dual Head RV Pressure Gauge: 20-120 psi high pressure, durable nylon indicator bar reads in two pound increments, high impact chrome body, completewith pocket clip
5123 Tread Depth Gauge: durable all-chrome construction, wide base, reads 0” to 1” in 1/32” increments, complete with pocket clip
AIR PRESSURE & TREAD DEPTH GAUGES
TIRE SERVICE TOOLS AND GAUGES
STOCK NO. DESCRIPTION1504 In-Line Tire Inflator: easy-to-read three-sided brass indicator bar calibrated from
0 to 120 psi in two pound increments, convenient chuck and inflator valve for easy bleeding of over-inflated tires, complete with 36” safety hose with clip-on valve chuck
IN-LINE TIRE INFLATORS
STOCK NO. DESCRIPTION5209 4-in-1 Valve Repair Tool8909 Cable-Type Valve Fishing Tool449 Valve Spinner Wrench (screwdriver type)
VALVE SERVICING TOOLS
STOCK NO. DESCRIPTION3042 Standard & Large Bore Screwdriver-Style Valve Core Removal Tool47-068 Quick Deflator Core Removal Tool5406 Pencil-Type Core Removal Tool188 Large Grip Cap/Core Removal Tool
VALVE CORE SERVICING TOOLS
PRESSURE GAUGES & INFLATORS
256
AIR LINE ACCESSORIES
STOCK NO. DESCRIPTION UNITS/BOX764 Ball Chuck: barb type, 1/4” fitting 106044 Ball Chuck: 1/4” female fitting 106293 Ball Chuck: clip-on type, not flow through (for direct air lines) 56293A Screw-in Air Chuck Clip 5
103753 Ball Chuck: clip-on type, flow through 5(for tire changers & inflator gauges)
6999L Lock-on Dual Head Chuck 56999 Press-on Dual Head Chuck 57150 Grip-on Lock Type Chuck, not flow through (for direct air lines) 5
AIR CHUCKS
Cadmium-plated hardened steel air linecouplers and nipples are designed forlong service life. All couplers feature apositive locking, sliding sleeve to preventaccidental uncoupling. Tru-Flate, ARO,Lincoln and Milton types available.
STOCK NO. DESCRIPTION THREAD13-124 1/4” Tru-Flate Male Coupler 1/4”13-134 1/4” Tru-Flate Female Coupler 1/4”13-136 1/4” Tru-Flate Female Ring Sleeve Coupler 1/4”12-124 1/4” Tru-Flate Male Nipple 1/4”12-134 1/4” Tru-Flate Female Nipple 1/4”12-104 1/4” Tru-Flate .302-32 Female
Nipple, with standard valve cap thread 1/4”13-604 3/8” Tru-Flate Male Coupler 3/8”13-612 3/8” Tru-Flate Female Coupler 3/8”12-604 3/8” Tru-Flate Male Nipple 3/8”12-612 3/8” Tru-Flate Female Nipple 3/8”13-704 1/2” Tru-Flate Male Coupler 1/2”13-712 1/2” Tru-Flate Female Coupler 1/2”12-704 1/2” Tru-Flate Male Nipple 1/2”12-712 1/2” Tru-Flate Female Nipple 1/2”12-702 1/2” Tru-Flate Male Nipple, with 3/8” NPT 3/8”13-324 1/4” ARO Male Coupler 1/4”13-334 1/4” ARO Female Coupler 1/4”12-324 1/4” ARO Male Nipple 1/4”12-334 1/4” ARO Female Nipple 1/4”13-424 1/4” Lincoln Male Coupler 1/4”13-434 1/4” Lincoln Female Coupler 1/4”12-424 1/4” Lincoln Male Nipple 1/4”12-434 1/4” Lincoln Female Nipple 1/4”13-224 1/4” Milton Male Coupler 1/4”13-234 1/4” Milton Female Coupler 1/4”12-224 1/4” Milton Male Nipple 1/4”12-234 1/4” Milton Female Nipple 1/4”
AIR LINE COUPLERS & NIPPLES
PRESSURE GAUGES & INFLATORS
AIR TANKS, AIR HOSE & ACCESSORIES
TRU-FLATE
257
AIR LINE ACCESSORIES
Two-ply heavy duty, non-kink Reinforced Air Hose can take the worst punishment: oil, grease, abra-sion and extreme temperatures. Built to handle pressures up to 250 psi. Length come complete withmale pipe thread on both ends.
STOCK NO. DESCRIPTION HOSE ID38-25HD 25’ Reinforced Air Hose with 3/8” Male Ends 3/8”38-50HD 50’ Reinforced Air Hose with 3/8” Male Ends 3/8”12-25B 25’ Reinforced Air Hose with 1/2” Male Ends 1/2”12-50B 50’ Reinforced Air Hose with 1/2” Male Ends 1/2”
REINFORCED AIR HOSE
PERMA COIL® RETRACTING AIR HOSE
Bright yellow coiled retracting air hose is extremely durable and resists damage from oil, chemicalsand abrasion. Easy-to-see bright color helps eliminate accidents. All units include a brass 3600 swivelmale connector.
STOCK NO. DESCRIPTIONTF23-403 25’ Perma Coil Air Hose, 1/4”TF23-404 50’ Perma Coil Air Hose, 1/4”TF23-413 25’ Perma Coil Air Hose, 3/8”TF23-414 50’ Perma Coil Air Hose, 3/8”Note: Air line regulators, filters, and water separators also available.
PNEUMATIC BEAD EXPANDERS
258
TORQUE LIMITING SOCKETS
RECOMMENDED BY TIRE SERVICE PROFESSIONALS!We Stock #30174 Four Piece Starter Kit
Six-Piece and Nine-Piece Starter Sets are available by Special Order.Individual Sockets are also available by Special Order.
For removing 13/16” Budd wheel inner cap nuts, 3/4” and 5/8” lug studs. Kit includes Drive-On Tool,13/16” sq. 1 1/8” dia., 3/4”, and 5/8” Rib Nuts, and Drift Pin.
PART # DESCRIPTION5205 Triple Duty Kit
WHEEL NUT AND STUD REMOVING KIT
WHEEL ATTACHING PARTS AND TOOLS
Order as required.
PART # DESCRIPTION5206 1 1/8” dia. (13/16” square head) Rib Nut5207 3/4” Rib Nut5208 5/8” Rib Nut
REPLACEMENT RIB NUTS
• Protect Steel and Aluminum Wheels• Prevent Corrosion
Wheel Guard is a black nylon separator plate approximately 1/32” thick that is placed between the huband the wheel or between dual wheels. We recommend the wheel guard be used to prevent corrosionand wear between surfaces. Use with both steel and aluminum wheels.
MFR. NO. APPLICATION DIAMETER STUD5901 10 HOLE 11 1/4” bolt circle 1 1/8” and 7/8”5902 10 HOLE 285.75 mm bolt circle 3/4”7902 8 HOLE 275 mm bolt circle 20 mm
WHEEL GUARD
Simply thread STUD SETTER on. Use impact or 4-way wrench to install stud.
ORDER NO. DESCRIPTION5833 5/8” Wheel Stud Setter - uses 1 1/8” hex socket5834 3/4” Wheel Stud Setter - uses 1 1/4” hex socket
5/8” AND 3/4” STUD SETTERS
259
HAMMER WITH FIBERGLASS HANDLE.MFR. NO. OVERALL LENGTH
TG-11 35429 32”TG-11EH 35229 32” Rpl. Handle
HAMMER WITH WOOD HANDLEMFR. NO. OVERALL LENGTH
T-11E 35329 30”T-11EH 35129 30” Rpl. Handle*Other sizes & replacement handles available
TRUCK TIRE HAMMERS
STANDARDMFR. NO. SOCKET SIZES
TR1 32501 1 1/8”, 13/16”, sq.TR98 32508 1 1/2”, 13/16” sq.TR2 32502 1”, 1 1/4”, 5/8” sq.TR9 32509 1 1/4”, 1 1/16”
TRUCK WRENCH HANDLEHandle is extra long for increased leverage and heat treated for extra strength
MFR. NO. LENGTH HEXTR-5 32318 22” 3/4”
DOUBLE END TRUCK WRENCHES
TOOLS & EQUIPMENT
PASSENGER CARMFR. NO. LENGTH
Socket sizes: 3/4”, 13/16”, 7/8”, 15/16”T-57 35657 23”
LIGHT TRUCKMFR. NO. LENGTH
Socket sizes: 7/8”, 15/16”, 1”, 1 1/16”T-90 35690 25”
HEAVY DUTY TRUCK FOUR-WAYMFR. NO. LENGTH
Socket sizes: 1 1/16”, 1 1/4”, 1 1/2”, 13/16” sq.T-95 35695 27 1/2”*Other sizes available
4-WAY WRENCHES
Designed for mounting and demounting tubeless tires. Hand forged chrome nickel steel. Use in pairs.
MFR. NO. LENGTHT-45A 34645 37”
HEAVY DUTY TUBELESS TRUCK IRONStock is 7/8” for extra strength, length is 41” for extra leverage. Use in pairs.
MFR. NO. LENGTHT-45 HD 34647 41”
TUBELESS TIRE TOOLS
260
STRAIGHT SPOON TIRE IRONSMFR. NO. LENGTH DIA.
T-19 32119 24” 11/16”T-19A 33219 30” 11/16”T-38 33238 30” 7/8”
CURVED SPOON TIRE IRONSMFR. NO. LENGTH DIA.
T-2X 32102 18” 11/16”T-20A 33220 30” 11/16”T-39 33239 30” 7/8”
MOUNT/DEMOUNT TIRE SPOONS
Designed especially for Firestone RH and TI rims.
MFR. NO. LENGTH DIA.T-23 32123 24” 11/16”
Designed especially for Firestone RH and RI rimsT-23A 33223 30” 11/16”
Combination ring tool T-23B with flat tapered end. Ideal for all around ring and rim work.
MFR. NO. LENGTH DIA.T-23B 33224 23 1/2” 11/16”
Combination ring remover. Curved end is shaped to remove full circle lock rings. Avoids distorting rings.
MFR. NO. LENGTH DIA.T-22 32122 18” 5/8”
For servicing 5o wide base rims.
MFR. NO. LENGTH DIA.T-25 32125 18” 5/8”
For removal of continuous side rings on two piece truck rims
MFR. NO LENGTH DIA.T-27A 32128 18” 5/8”
Aids in removing and replacing lock rings on all Budd, Ford, Chevrolet, and GMC wheels.
MFR. NO. LENGTH DIA.T-48A 34648 37” 3/4”
TRUCK LOCK RING REMOVERS
TOOLS & EQUIPMENT
Holds outer cap nut while turning inner nut on Budd and Ford wheels.
MFR. NO. SIZETX-9 30609 1 1/2” and 38mmTX-10 30610 35mmTX-12 30612 41mm
BUDD NUT WRENCHES
261
Steel JacketPrecision made tire studs with carbide traction pins encased in a wear resistant jack. The hole designof the jacket together with the tapered carbide pin help maintain a consistent pin protrusion for the lifeof the tire. Sold in boxes of 1,000.
ORDER NO DESCRIPTION HOLE DEPTH INCHES12 #12 Tire Studs 12/3213 #13 Tire Studs 13/3215 #15 Tire Studs 15/3216 #16 Tire Studs 16/3217 #17 Tire Studs 17/32
TIRE STUDS
STUDS AND STUDDING EQUIPMENT
Fully Automatic FeedingElectric MotorA fully automatic, fast loading feeder that provides positive stud orientation. Fewer moving parts forcontinuous service, minimum maintenance. Feeds up to 225 studs per minute. Handles (TSMI) sizes#12, #13, #15, #16 and #17. 110 V, 60 cycle.
ORDER NO MFR. NO DESCRIPTIONKFP2 KFP2-1 Stud Feeder
STUD FEEDER
GARAGE EQUIPMENT
Ideal for Busy ShopsIncludes: shelf for stud package, gun holder and support for tire stud feeder. Welded steel constructionand stable T-shape support. Base dimensions: 21”x 27”, 5’2” Height.
ORDER NO. DESCRIPTIONK5 K-5 Stud Stand
Gun and Stud Feeder Not Included
MODEL K-5 STAND
For Automatic FeedingEquipped for automatic feeding of studs to gun. Positive center feed eliminates wrong positioning ofstuds. Handles stud sizes (TSMI) 10 thru 17. Studs installed straight. Easy maintenance- no toolsneeded. No “push rod” yet fingers are automatically ejected from hole.
ORDER NO. DESCRIPTION10 Model 10 Stud Gun
MODEL 10 STUD GUN
MFR. NO. DESCRIPTION0382 Repair Kit for #10 Stud Gun
REBUILD KIT
MFR. NO. DESCRIPTION0385 Rebuild Kit for #10 Stud Gun
REPAIR KIT FOR #10 STUD GUN AND REBUILD KIT FOR #10 STUD GUN
FEEDER BOY
Holds Up to 100 StudsInexpensive and fast method for feeding studs automatically to Model 10 gun. Lift off cap and loadwith up to 100 studs. Snap onto base and rotate by hand to release studs into gun chamber.Lightweight rugged plastic construction. Gun not included.
ORDER NO. DESCRIPTION4048 Stud Feeder boy
262
Removes and installs chrome wheel nut covers without scratching or damage. Adjustable. Formedsteel jaws with Non-Mar protective coating.
ORDER NO. DESCRIPTIONN88-1101 Chrome Nut Remover
CHROME NUT COVER REMOVER
TIRE AND WHEEL EQUIPMENT
Permanent PaintPermanent, waterproof and fadeproof. Marks on wet tires or tires covered with mold lubricant.Withstands vulcanizing and retreading temperatures. Also marks on wood, plastic, glass, etc.Nontoxic, contains no lead. Sold 12 per box.
MFR. NO. COLORMHKPS White
MARKAL® PAINTSTIK®
GARAGE EQUIPMENT
Visually detects excessive wear in .875R spherical chamfers of bolt holes in disc wheels. Designed foruse with stud piloted dual steel wheels with .875R spherical chamfered bolt holes 3/8” to 1/2” discthickness.
ORDER NO. DESCRIPTIONFS5905 Bolt hole Chamfer Wear Gauge
BOLT HOLE CHAMFER WEAR GAUGE
Continuous Balance... Every Tire, Every Wheel Position, Every Time!No More Vibration & Uneven TreadwearEqual is a revolutionary dry balancing formula that provides a continous balance to the tire and wheelassembly. Fast and easy to install on or off the vehicle. Ideal for all types of truck tire and wheelassemblies, aluminum or steel, disc or spoke, tube and tubeless. Especially effective for difficult to bal-ance aluminum rims.
ORDER NO. FOR TIRE SIZE USE PACKAGE SIZEA12 1200 R22.5 AB10 10.00 R20-275/80 R24.5 BC8 900 R20- 245/75 R22.5 CD6 800 R19.5-245/70 R19. DE4 800 R17.5-225/75 R17.5 EF2 215/85 R16-9.50-R16.5 F
For best results, use a valve stem filter extension when using Equal. Install Equall through the valve stem.
Recommended AccessoriesDESCRIPTIONPortable ApplicatorValve Stem Filter- Nickel PlatedValve Stem Filter- Brass
EQUAL TIRE BALANCING FORMULA
AUTO & LIGHT TRUCK BOLT PATTERN GAUGE
Easily identify rim sizes. Gauge fits over disc or drum studs to accurately measure bolt patterns. Magwheels are measureed by fitting the gauge into 2 lug holes. To measure wheels with conical holes usethe 2 conical adapters. Kit includes 4 and 5 lug hole gauges.
PART # DESCRIPTION2002 Wheel Gauge
263
• Set Tubeless Beads Instantly- Every Time!• Eliminate Personal Injuries
Use No Ether Use No Tire Grease Use No Tire Compressor Bands
A SAFE AND EASY TIRE INFLATING DEVICE.COULD PAY FOR ITSELF IN 24 HOURS!
• Completely Portable- weighs only 25 lbs.• Carry in one hand- Road & Shop use• If your man can turn a key, then he can now seat a Bead Instantly• Set all tires from the smallest car up to 17.5x25• Golf Cart Tires• Race Car Tires
THE BEAD SEATER
TIRE MOUNTING EQUIPMENT AND LUBRICANTS
GARAGE EQUIPMENT
For Mounting Tube & Tubeless TiresRust InhibitorEconomical and long lasting 8 lb. pail makes 5 gallons when mixed with water. Alsoavailable premixed as liquid. Can also be used for lubricating rubber mounted springshackles, bushings, fan belts, and other rubber fittings.
PART NO. SIZE PAIL PER CASE2000 8 Lbs. 42005 25 Lbs. 12010 40 Lbs. 1
Liquid MURPHY’S2020 1 Gal. 42023 5 Gal. 22055 55 Gal. 1
000491 Lube Swab 1
MURPHY’S TIRE & TUBE COMPOUND
Bead LubricantRust InhibitorPrevents corrosion caused by electrolysis as well as conventional rust. Reducesreplacement expenses for flaps on conventional tires.
PART NO. SIZE PAIL PER CASEFRY5 4 1/2 lb. Can 4FRY25 25 lb. Can 1
FREYLUBE
264
GREASE AND GREASE EQUIPMENT
The highest quality multi-purpose grease due to a lithium complex base providing for greater heat andwater resistance. Operating temperature range of -10o to 350oF. Fortified with additives to resist rust,oxidation, extreme pressure and wear. Excellent water resistance. Designed for boat trailers, discbrake wheel bearings and more. NLGI Grade 2.
PART NO. DESCRIPTION30-141 3 oz. cartridge, 3 per display bag3160 14 oz. cartridge3161 1 lb. (16 oz.) can
HEAVY DUTY DISC BRAKE WHEEL BEARING GREASE
MARINE AND TRAILER WHEEL BEARING GREASEA high quality lithium based, multi purpose grease that performs well under a temperature range of 0o
to 290oF. Highly water insoluble and washout resistant. Fully fortified with additives to protect againstrust, oxidation, extreme pressure, and wear. A recommended leader for medium slow to medium highspeed bearings and greased chassis points. NLGI Grade 1 1/2. USDA H2.
PART NO. DESCRIPTION3121 1 lb. (16 oz.) can3184 3 oz. cartridge, 3 per display bag3120 14 oz. cartridge
MULTI-PURPOSE GREASEA lithium base grease that performs well under a temperature range of 0o to 265oF. Water insoluble.Use in most automotive, agricultural and industrial applications including chassis and other greaselubricated bearings. A grease for normal temp/speed conditions and job requiring frequent regreasingbecause of contaminating environment. NLGI Grade 2.
PART NO. DESCRIPTION30-124 14 oz. cartridge
GREASE GUNS
1142 Lisle Brand Professional Lever Action Grease Gun Our heavy-duty grease gun for automotive professionals. Variable/short stroke for easy use in confined areas.
1134 Lisle Brand Professional Pistol Grip Action Grease Gun Our heavy-duty grease gun for automotive professionals. Pistol grip action for one-hand operation.
PROFESSIONAL LIGHTING AND CORD PRODUCTS
• The Industry Standard• SL-907 (6Ft cord).• SL-935 (25Ft cord).• SL-936 (50Ft cord).
ROUGH DUTY FLUORESCENT/SPOT WORK LIGHT - PROFESSIONAL SERIES
LAMP HANDLE CORD BULB PLUG/ CS CSOUTLET QTY WT
High Impact Yellow Flame Retardant 16/3 Uses 13 Watt Polarized Plug SL-907 6 9lbs.Lamp Protector Polypropylene SJEO 10,000 Hr. Rated with 12 AMP SL-935 6 14 lbs.with High Gloss 6500 Kelvin Grounded SL-936 4 19 lbs.Reflector (included) Receptacle
Pro Mechanics choice. Impact resistant fluorescent work light with chemical and UV resistant lampprotector. Custom high gloss reflector and clear polycarbonate top for spot-lighting. Convenient dou-ble hang hook allows hanging or standing. Unique nylon tips for scratch resistance and extra grip.Polypropylene handle and convenient rocker on/off switch. 6ft, 25ft or 50ft 16/3 SJT cord. 12 AMPgrounded receptacle. Cool running 13 wall 10,000 hour rated 6500k fluorescent bulb (included).
• SL-851 (50Ft cord).
UTILITY LIGHT ON 50FT RETRACTABLE REEL - PROFESSIONAL SERIES
LAMP HANDLE CORD BULB CS QTY CS WTGalvanized Heavy Duty Metal 18/3 Up to 75 Watt 4 17 lbs.Metal Lamp Retractable Reel with SVT IncandescentShield with Black Flame Retardant (not included)Hang Hook Polypropylene Handle
Heavy duty metal retractable reel and utility light with reflective galvanized metal lamp shield, hanghook, black polypropylene handle, and durable push on/off switch. 50ft 18/3 SVT cord. Uses up to75 watt incandescent bulb (not included).
• SL-825 (40Ft cord).
ROUGH DUTY FLUORESCENT WORK LIGHT ON 40FT METAL REEL - PROFESSIONAL SERIES
LAMP REEL CORD BULB PLUG/ CS CSOUTLET QTY WT
High Impact Lamp Heavy Duty 16/3 13 Watt Polarized Plug 4 44 lbs.Protector with Metal Retractable SJT 10,000 Hour with 10 AMPHigh Gloss Rated 6500 Kelvin GroundedReflector (included) Receptacle
Heavy duty metal retractable reel and fluorescent work light with clear chemical resistant lamp pro-tector, high gloss reflector, yellow polypropylene handle, and durable push on/off switch. Nylontipped double hang hook or convenient magnetic clamp. 40ft 16/3 SJT cord with polarized plug and10 AMP grounded receptacle. Cool running 13 wall 10,000 hour rated 6500k fluorescent bulb(included).
265
LIGHTING AND CORDS • WIPER BLADES
• SL-1002 UPC# 0 17398 21002 (3Ft cord).
500 WATT HALOGEN PROJECT WORK LIGHT
LAMP HANDLE CORD BULB PLUG CS CSQTY WT
Tempered Glass Lens Foam Grip 18/3 500 Watt Polarized Plug 6 31 lbs.with Metal Safety “S” Type SJTW HalogenGrill with a spare
Portable 500 watt halogen work light with foam grip “S” type handle. Tempered glass lens with metalsafety grill and power coat finish. 3ft 18/3 SJTW all weather cord with molded plug. 500 watt halo-gen bulb with a spare bulb in a protective bulb holder (included).
CONTRACTOR GRADE - SINGLE TAP
MODEL CORD LENGTH CORD RATING CS QTY UPCSL-725 25ft 16/3 SJTWA 13A 18 0 17398 10128 8
SL-750 50ft 16/3 SJTWA 13A 12 0 17398 10129 5
SL-751 100ft 16/3 SJTWA 10A 6 0 17398 10164 6
SL-752 25ft 14/3 SJTWA 15A 12 0 17398 10191 2
SL-753 50ft 14/3 SJTWA 15A 6 0 17398 10192 9
SL-754 100ft 14/3 SJTWA 13A 6 0 17398 10193 6
SL-757 25ft 12/3 SJTWA 15A 4 0 17398 10194 3
SL-758 50ft 12/3 SJTWA 15A 2 0 17398 10195 0
SL-759 100ft 12/3 SJTWA 15A 2 0 17398 10196 7
266
CALL FOR APPLICATIONS
SAVER WIPER BLADES
VISION SAVER
267
• Resists Oil & Dust Buildup • Cleans & Displaces Moisture• Fast-acting Penetrant • Ideal for Electrical/Electronic Components and for • Contains No CFCs Delicate Mechanisms
PART NO. DESCRIPTION00116 11 oz.01128 1 gal.
LPS® 1 GREASELESS LUBRICANT
• Non-drying Oily Film • Long Lasting Lubrication• Loosens Rusted & Frozen Parts • Multi-purpose Lubricant, Penetrant, Protectant• Nonflammable Propellant • Contains no CFCs
PART NO. DESCRIPTION00216 11 oz.02128 1 gal.
LPS® 2 INDUSTRIAL-STRENGTH LUBRICANT
LUBRICANTS, CLEANERS, AND INHIBITORS
• Transparent, Soft Waxy Film • Stops Rust & Corrosion• Protects Up to 2 Years • Non-slinging Heavy Duty Lubricant• Contains No CFCs
PART NO. DESCRIPTION00316 11 oz.03128 1 gal.
LPS® 3 HEAVY-DUTY RUST INHIBITOR
• 1,1,1 Replacement Alternative • Natural-based Solvent• Cleans & Degreases on Contact • Controlled Evaporation for Deep Cleaning • No Rinsing, No Residue Penetration• Contains No CFCs
PART NO. DESCRIPTION01420 15 oz.
LPS® PRESOLVE® CLEANER/DEGREASER
• 5% Silicone • Lubricates and Protects• Water Based • Safe on Most Surfaces• Contains no CFCs or Chlorinated Solvents
PART NO. DESCRIPTION40003 13 oz.
LPS® HEAVY-DUTY SILICONE LUBRICANT
• 95% Pure Zinc • Works as a Primer• Works on Rusted Surfaces and All Metals • Contains No CFCs or 1,1,1 Trichloroethane
PART NO. DESCRIPTION00516 16 oz.
LPS® COLD GALVANIZE
• Cleans, Degreases Delicate Mechanisms • Quick Penetration and Evaporation• No Rinsing, No Residue • Nonconductive, Nonflammable• Safe on Most Surfaces
PART NO. DESCRIPTIONLPS 00416 16 oz.
LPS® ELECTRO CONTACT CLEANER
268
CLEANERS AND CAR CARE PRODUCTS
CAR CLEANING PRODUCTS
MORE SHINE LESS TIME™
TRIM SHINE®
The protectant professions use. Trim Shine brightens and protects bumpers, running boards, trim,dashboards, vents, hoses, door gaskets, and more. Just spray and walk away. Won’t run, drip, orstreak. No rags, dirty hands, or waste.
• 12 ox. Aerosol, 12 cans per case. • Item No. 91034
“I was given a can of Stoner Trip Shine by my Ford Dealer. Your product is incredible. Trim Shineblows away Armor All and that 2000 stuff.”
D.N., Centerville, VA
SPEED BEAD®
Speed Bead lets you wax in minutes, not hours. Cleans, polishes, and waxes in one easy step.Removes oxidized paint, light scratches, and environmental damage. Contains a proprietaryblend of cleaners, waxes, and synthetic micropolymers. Safe for clear coat finishes.
• 15 oz aerosol, 12 cans per case• Item No. 91354
“Speed Bead is the best wax n the world. Wow, is that stuff great! Other race team come over toour paddock area to bowwow Stoner products.”
Scott Bove, Owner/Driver Team Tech Racing, Porsche GT3 Cup World Challenge
BEAD MAX®
Bead max chemically bonds to your finish giving your maximum surface protection, water beading,and shine. It contains no cleaners or abrasives.
• 15 oz. Aerosol, 12 cans per case.• Item No. 91384.
“I have used ZymÔl, and most mass market waxes. I have even used products most people don’tknow about. Bead max is the best by far.
J.T., Stockton, CA
“Bead max is very fast to use and much more efficient than any other wax. It made he pain looklike it came directly off of the showroom floor.”
A.G., Strasburg, PA
More Shine Less Time is not a messy fam or drippy liquid. This long lasting spray-on coatingmakes dull, faded tires look brand new in seconds. Just spray and walk away. Other brands don’tlast because they’re made with water and surfactants (soaps) that evaporate and wash off easilywith water. More Shine Less Time contains NO surfactants or water so it lasts longer. Selected“Best Tire Product” by Corvette Fever magazine.
• 12 oz. Aerosol, 12 cans per case. • Item No. 91044
“More Shine Less Time for tires makes tires shine without that greasy look. And the goop thatspins nto the wheels and inner fenders is thankfully missing.
R.B., San Jose, CA
CLEANERS AND CAR CARE PRODUCTS
The fastest way to remove greasy dirt and “sticky stuff.” You won’t find a better way to removeadhesives, decals, gum, lipstick, and tar from carpeting, glass, chrome, metals, and moare.
• 10 oz. aerosol, 12 cans per case. • Item No. 94213
“XENIT is the only product that will remove a rubber doughnut from the side of our race cars afterrunning speedways like Daytona or Talladega.”
Tony Barnes, Shop Foreman, ML Motorosports
Jason Jarett crew, ARCA Series
Call for information on additional Stoner Products.
INVISIBLE GLASS®
TARMINATOR®
Finally, a tar and sap remover that works! Used by a leading German luxury sedan manufacturerto clean and prep cars after transit from Europe. Cleans painted surfaces in preparation for wax-ing. Clearcoat safe.
• 14 oz aerosol, 12 cans per case.• Item No. 91154
“I’ve just thrown away near full cans of your competitors’ sap and tar removers. The differencebetween Tarminator and the others is simple, their don’t work. “
M.B. Los Angeles, CA
UPHOLSTERY AND CARPET CLEANERRemoves water-soluble dirt and stains such as coffee, food, candy, smudged dirt, and grime.Dries fast and won’t leave surfaces saturated and wet
• 18 oz aerosol, 12 cans per case• Item No. 91144
“Stoner Carpet Cleaner is excellent! I tried it first on a chocolate stain on my minivan upholsteryand it came out right away.”
P.B. Nashua, NH
XENIT® CLEANER/REMOVER
Cleans windows and mirrors so well, you’ll think they’re invisible. Other cleaners use water andfoamy soaps and surfactants. These low cost ingredients remove basic dirt, but leave streakyresidues. Invisible Glass contains NO soaps, surfactants, or foams so you get maximum clarity.Safe for tinted windows.
• 19 oz. aerosol, 12 cans per case.• Item No. 91164
“It really works? Many brands claimed to be streak free but none were until I tried Invisible Glass.”M.G. Warren, PA
“I applied Invisible Glass to my award winning Corvette aand the glass almost disappeared. MyCorvette went on to win the grand championship, beating out all year Corvettes.”
D.H., Woburn, MA
CAR CLEANING PRODUCTS
269
270
LPROFESSIONAL LANDSCAPE TRAILER ACCESSORIES
LT10 Lockable Trimmer Rack
LT15 Multi-Rack
LT22 Backpack Blower Rack
LT37 Hand Tool Rack
LT35Hand Tool Rack
LT20Backpack Blower Rack
LT12 Trimmer Rack
LT13 Lockable Trimmer Rack
LT30 Gas Can Rack
LT32 Locking Gas Can Rack
LT25Water Cooler Rack
WE STOCK TARPS TOO! - SEE PAGE 271
271
TRUCK SAFETY • TRUCK TARPS
Part Number Description3500 6’ x 12’ Black Mesh Tarp3598 7’ x 12’ Black Mesh Tarp3599 7’ x 14’ Black Mesh Tarp3600 7’ x 16’ Black Mesh Tarp397 7’-6” x 16’ Asphalt Lumite Tarp
TRUCK TARPS
EMERGENCY TRIANGLE SAFETY WARNING KITS
TARP SYSTEMS
449Warning Triangle Kit
1015 James King KitWarning Triangle Kit W/Flares and Fire Extinguisher
272
1215200
143020012VDC w/Roller Fairlead
145020012VDC w/Roller Fairlead
144020012VDC w/Roller Fairlead
273
TUBULAR CHOCK
Part# T101-2003• 1” 304 Stainless Steel Construction • One Man Installation / Top Side• Quick Release• Wood Floor Installation Hardware Included
Experience The Difference...- No Rust Stainless Steel- Thick Wall Heavy Duty- Larger Diameter than Competitors- Shipped On Time / Every Time- Call For Details
Proven Unique Fastener SystemPart# Z101-0010 (Additional Hardware (4))
Available in 24” and 16” Lengths Black Powder Coated
Part # Description T436-1634B 16” RecessedT436-2400B 24” Recessed
• Flush Mount• Heavy Duty Steel Pan & Lid• Tie Down Strap Storage• Installation Hardware Included
RECESSED CHOCK
• 1 1/4” 304 Stainless Steel Construction• Easy Flange Mount• Arrives Fully Assembled for Easy Installation• Style Similar to Pit Stop Wheel Chock• Designed to Strap and Restrain Helmets and Accessories• Restraint Bars Hug Riding Apparel Nicely
HELMET AND ACCESSORY RACK
MOTORCYCLE PRODUCTS
Part # Length T101-2400 24”T101-3200 32”T101-4800 48”
MOTORCYCLE CHOCKS AND ACCESSORIES
274
LIFTGATE REPLACEMENT PARTSDRAIN PARTS
APL 3365Heavy duty drain solenoid kit comescomplete with solenoid, bracket, cap andstem hardware.
AMF 3330Complete solenoid drain valve with car-tridge replaces Maxon 250072 andLeyman. Used on most SPX (Fenner)electric power units.
MOTORS
BMT 0022A very popular regular duty tang shaftliftgate motor! This CCW, 12-Volt, DC,OEM motor is found on Waltco, MAxonMonarch and MTE.
SOLENOIDS
APL 30003-post, positive to excite, metal ground-ed solenoid with flat base. Use for mostall liftgate makes and models.
APL 3020Another great replacement option, thisbakelite upright solenoid is built toPrestolite standards. 3-post, positive,grounded with curved base.
SWITCHES
APL 2250This common dimmer style start switch offersquality, reliability and value all in one.
BPL 2250Order this canister switch for service andreplacement of many Monarch and Theimanitems. Features screw-type mount.
NEED PARTS FOR THAT OLD LIFTGATE? NOW WE HAVE EM!
AMT 0077Regular dutyCW replacement motorwith spline shaft. An exact replacementfor the Prestolite MDY7039. Also use forMaxon, Waltco and Venco replace-ments.
AMT 0097Built to Prestolite specifications andaffodably priced. Regular duty motorreplaces Waltco, Maxon, Anthony,Venco, DelAmerica, Tommy and SPX(Fenner) products.
POWER UNITSAPP 0100Replace that worn out pump with this OEM manual power pack. Features OE punp and motor, 3-qt. reser-voir and regular duty motor.
APP 0250Drop-in replacement for MAxon 250100 power unit. Pressure set to 2500 psi, adjustable. Prestolite sole-noid with 2 wires for drain solenoid and a 12” L reservoir with breather. Includes extra port for return line.
We Stock These & Much More!
LIFTGATE PARTS
TOW CONDUCTOR TRAILER DISCONNECT PLUGDual pole, rated 200 amps for 6 gauge wire.BPL 2610 Plug and Socket.BPL 2611 Socket only.BPL 2612 Male plug only.
BATTERY CABLESDo that installation right! If you want to add products to what you’ve already bought, check our pricingbefore you buy the competition.
ELW 50001/0 gauge, SGT, black jacket, copper wire, 133 strand.
ELW 50044 gauge, SGT, red jacket, copper wire, 63 strand.
ELW 3042Dual pole change line Bonded 4 gauge copper rated. 200 amps
ELECTRICAL COMPONENTSACCESSORIES
DELUXE TERMINAL ASSORTMENTMake sure you have the correct teminal for the job 240 pieces.EPR 5099
Keeps those connecotrs watertight and seals connections for longevity. Heat shrinkable polyolefin shrinksto 1/2 of original size
SHRINK TUBINGWaterproof polyolefin spool. Shrink ratio 2 to 1.EPR 4008 4’ x 1/8”EPR 4016 4’ x 3/16”EPR 4025 4’ x 1/4”EPR 4038 4’ x 3/8”EPR 4050 4’ x 1/2”EPR 4100 4’ x 1”
Heavy wall with adhesive. Superior strain relief. SHrink ratio 3 to 1. Preshrunk IDEPR 4238 3/8”EPR 4275 3/4”EPR 4210 1”
LIFTGATE PEPLACEMENT PARTS - WIRE AND BATTERY PRODUCTSMASTER DISCONNECT SWITCHAPL 96536-36 Volt. 180 Amps continuous capacity - 1,000 amps rush. S.P.S.T. (off-on). Two stud terminals 3/8” copper. 4-1/8 long by 2-5/8” diameter. Conforms to UL 558. WIth face plate.
CIRCUIT BREAKERSAPL 9005 50 Amp Circuit BreakerAPL 9009 90 Amp Circuit BreakerAPL 9012 120 Amp Circuit BreakerAPL 9015 150 Amp Circuit Breaker
Same mounting holes as APL 8012. SLightly smaller overall. Same trip characteristics.
TRAILER DISCONNECT PLUGBPL 2600 Trailer disconnect plug.BPL 2601 Socket only.BPL 2602 Male Plug onlySingle pole connector. Up to 1/0 cables. Hot, 2 gauge ground. Brass contracts. Mount through 2” diameter hole. Internal ground return terminal. 300 amps continuous.
275
LIFTGATE PARTS
276
AUTOMOTIVE SERVICE PRODUCTS
# SNOBRUM Telescoping Aluminum Handle
# SNOWBRUM -1 Gen II Wooden Handle
ALSO AVAILABLEARJ-104 Standard 12 Volt Portable Jump Starter
WPG-103 “Winchester” 12 Volt Portable Jump Starter with power inverter
ALLSTART12Volt Portable Jump StarterUltra-Reflectiver labeling29 foot, 6 gauge cablesAdjustable Emergency LightDisplay Packaged for Resale
AMPG-108 “MARINA”Marina 12Volt Portable Jump StarterHeavy Duty High Output Battery4 foot, 4 gauge cablesAdjustable Emergency Light12 Volt DC Power Source115 Volts AC Power SourceDC Charging Cord IncludedDisplay Packaged for Resale
AMJ-401 “MINI-JUMPER”Mini 12Volt Portable Jump StarterHi-Brite 10 Watt Halogen SpotlightUser Safe Battery ClampsHigh Output 12 amp hr. BatteryAdapter Storage Great for Cell Phones, 12V Car Vac.12V Spotlights, Air Compressors,12V Fans, 12V TV’s, Portable Radios.and Much More!Display Packaged for Resale
ALLSTART-SPORT12Volt Portable Jump Starter115 Volts AC - 300 Watts PowerDeep Cycle 24 Hr BatteryAdjustable Emergency LightDisplay Packaged for Resale
APSOP-106 “PRO-ONE”Built Tough for Professional Use12Volt Portable Jump Starter4 Foot 4 Gauge Cables Adjustable Emergency LightDisplay Packaged for Resale
ALLSTART-CORD12Volt Charging Cord
PORTABLE BATTERY JUMP PACKS
FAST, EASY, ACCURATE RECHARGING.
AUTOMOTIVE SERVICE PRODUCTS
R134A REFRIGERANT
30 lb. ContainersBulk Discounts AvailableCall Us Today for a Quote
R134A FREON REFRIGERANT
R134A FREON CHARGING TOOL
Easy to read color-coded gauge for an accurate system fill
Easy reach with 8-inch of charging hose to reach all low-side ports
Easy one-hand operation. Squeeze trigger to fill,release to measure
Sturdy metal coupler attaches & detaches with ease.
# QC-1CS
3M Intake System Cleaner Kit
3M Intake System Aerosol Adaptor Kit
INTAKE CLEANING KITS
This is the most complete package of intake system cleaning chemicals available.This 3-pack is designed with the professional user in mind, providing the cleaningagents to go through the upper intake and in the tank, while including an aerosolproduct to clean the throttle plate and air intake on fuel-injected gasoline engines.
Equipped with an assembled tube attached to a brass quick disconnect fitting(08927) for attachment to the 3M Intake System Cleaner 08958. The kit alsoincludes a can hanger (08837) and a complete set of instructions
# 08962
# 08960277
278
AUTOMOTIVE SERVICE PRODUCTS
278
3M SILICONE PASTE #08946 8 OZ NET WT
A non-melting, water resistant, 100% solids, silicone compound designed to protect surfaces from oxidation. Also used as a general purpose lubricant for brakes (metal to rubber applications); great for O rings and weatherstripping.
3M THROTTLE PLATE AND CARB CLEANER #08866 8.5 OZ NET WT
Unique, low VOC aerosol product designed to dissolve the deposits that are normally found on the throttle plate in fuel injected cars. It both cleans and lubricates, while restoring performance
3M WINDOW-WELD ROUND RIBBON SEALER #08610 1/4 IN X 15 FT KIT
Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allowseasy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replaceone windshield or backlite
SCOTCH-BRITE ROLOC SURFACE CONDITIONING DISC #07480 2 IN, COARSE, 25 DISCS PER BOX
Offers ease of disc centering and is used in conjunction with 3M Roloc Disc Pad Assembly 05539
SCOTCH-BRITE ROLOC SURFACE CONDITIONING DISC #07485 3 IN, COARSE, 25 DISCS PER BOX
Offers ease of disc centering and is used in conjunction with 3M Roloc Disc Pad Assembly 05540
3M HEAT SHRINK TUBING REFILL PACKS #36618, 3/32 IN X 6 IN, 10 PACKS PER CASE
REFILL PACKS #36619, 1/8 IN X 6 IN, 10 PACKS PER CASE
REFILL PACKS #36620, 3/16 IN X 6 IN, 10 PACKS PER CASE
REFILL PACKS #36621, 1/4 IN X 6 IN, 10 PACKS PER CASE
Flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Assortment contains 3 each of the 7 colors.
AUTOMOTIVE SERVICE PRODUCTS
3M AUTOMOTIVE ATTACHMENT TAPE, #06377GRAY, 1/2 IN X 20 YDS, 30 MIL
Unique, low VOC aerosol product designed to dissolve the deposits that are normally found on thethrottle plate in fuel injected cars. It both cleans and lubricates, while restoring performance
SCOTCH FILAMENT TAPE #0689418 MM X 55 M
Excellent for bundling elongated metal and wood parts and for sealing and reinforcing cartons containing heavy items for shipment. Strong - High performance - Adheres instantly. Tensile strength is 380 lbs./inch
SCOTCH PERFORMANCE MASKING TAPE #26340 GREEN, 8 MM X 55 M
Highly conformable, provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put.Perfectly balanced to give outstanding masking results.
TARTAN VINYL ELECTRICAL TAPE #496563/4 IN X 60 FT
General purpose electrical insulating tape. Economical and durable with excellent resistance to a wide range of contaminants and weather conditions.
POST-IT LABELING TAPE #069503/4 IN X 36 YDS
General purpose removable marking tape which can be used for labeling bin and shelf marking, package identification and correction and coverup work. Sticks firmly yet removes easily.
3M DUCT TAPE SILVER #0696948 MM X 54.8 M
A general purpose cloth duct tape designed for non-critical applications such as sealing, bundling,holding, and various miscellaneous applications
279
SCOTCH PREMIUM HEAVY DUTY PACKAGING TAPE CLEAR #39523, 48 MM X 50 MTAN #39524, 48 MM X 50 M
This reusable dispenser makes it extremely convenient to use in a variety of locations without makingan investment in extra dispensers
AUTOMOTIVE SERVICE PRODUCTS
PERMATEX FAST CURE EPOXY #21425
Convenient premeasured 10 - 4 g mixer cups in packed can epoxy mixer cups. No mess, no guess, no waste. Ideal for bonding glass, hard plastics, rubber and metal. Bonds in 5-15 minutes. Grey adhesive has excellent chemical resistance. Fills porosities and can be used to build up worn parts.
Suggested Applications: Loose trim, broken grilles, loose door glass channels and casting cracks and holes
PERMATEX SURFACE INSENSITIVE THREADLOCKER BLUE #24027
OEM specified. Medium/high strength thread-locker for general-purpose applications. Especially well-suited for 1/4" to3/4" (6mm to 20mm) fasteners that have a slight oil film. Prevents vibration loosening. Oil resistant. Removable withhand tools for easy disassembly.
Suggested Applications: Rocker studs, rocker adjustment bolts and bolts on valve and cam covers, oil pans, disc brake calipers, intakes, alternators, and pulley assemblies
6 ML Tube (Carded)
PERMATEX MEDIUM STRENGTH THREADLOCKER BLUE #24200
OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustmentnuts, carburetor studs
6 ML Tube (Carded)
PERMATEX HIGH STRENGTH THREADLOCKER RED #27100
OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especiallywell-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies.Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.
Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts
6 ML Tube (Carded)
PERMATEX HIGH TEMPERATURE THREADLOCKER RED #27200
OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents bolts and press fits3/8" to 1" (10mm to 25mm) from loosening due to shock, severe vibration and heat stress. Exclusive formulation fornewer engines and high performance applications that require extreme temperature resistance.
Suited for temperatures up to 450 F (232 C). Removable with heat and hand tools. 10 ML. Bottle
21425
24027
24200
27100
27200
280
AUTOMOTIVE SERVICE PRODUCTS
31163
80078
81160
82180281
PERMATEX HIGH TACK SPRAY-A-GASKET SEALANT #80065
Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive. Remains effectiveunder temperatures of -65 F to 500 F (-54 C to 260 C). Resists gasoline, oil, antifreeze, axle lube, kerosene, propaneand butane. Level 3 12 Oz. Aerosol
Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; seals all felt, cork, metal, paper, rubber and asbestos gaskets
PERMATEX COPPER ANTI-SEIZE LUBRICANT #31163
A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and gallingwhere high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-syntheticgrease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30 F to 1800 F (-34 C to 982 C). Provides good electrical conductivity. Meets Mil Spec #907E. 16 Oz. Brush-Top Bottle
Suggested Applications: Spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, fuel filter fittings, and battery cable connections
PERMATEX HIGH-TEMP RED RTV SILICONE GASKET #91160
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cutgasket by making reliable ìformed-in-placeî gaskets that resist cracking, shrinking and migrating caused by thermalcycling. Coats pre-cut gaskets to increase reliability. Temperature range -65 F to 650 F (-54C to 343C) intermittent;resists auto and shop fluids. First generation 1970-1980 gasket maker. 8 Oz. Tube
Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans
PERMATEX ULTRA BLACK MAXIMUM OIL RESISTANCE #82180RTV SILICONE GASKET MAKER
OEM specified. For dealership warranty requirements, ensures extended drivetrain warranty compliance. Fast-curingformula. Sensor safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility,oil resistance properties through use of a patented adhesion system. Temperature range -65 F to 500 F (-54 C to 260 C) intermittent; resists auto and shop fluids and vibration. 3.35 Oz. Tube
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, transmission pans
PERMATEX ANTI-SEIZE LUBRICANT #80078
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60 F to 1600 F (-51 Cto 871 C). Salt, corrosion and moisture resistant ñ ideal for marine use. Non-aerosol version meets Mil Spec #907E. Aerosol - Level 3 8 0z.. Bottle
Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
80065
81724
PERMATEX ULTRA BLUE MULTIPURPOSE RTV SILICONE GASKET MAKER #81724
OEM specified. Permatex Ultra silicones were developed to meet todayís technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement values. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. 3.35 Oz. TubeTemperature range -65 F to 500 F (-54 C to 260 C) intermittent; resists auto and shop fluids and vibration.
Suggested Applications: Valve covers, oil pans, timing covers, transmission pans, differential covers
282
AUTOMOTIVE SERVICE PRODUCTS
PROFESSIONAL AUTO SERVICE CHEMICALS
PART NO. DESCRIPTION CASE QUANTITY
2812 Power Steering Fluid 12 per Case2942 Windshield Wash Concentrate 12 per Case12820 Windshield Wash Pre-Mix Gallons 6 per Case2418 Non-Chlorinated Brake Cleaner 10 oz. 12 per Case4642 Carb & Choke Cleaner 12 per Case4602 Rust Penetrant 10 oz. 12 per Case4603 Silicane Spray 10 oz. 12 per Case4604 White Lithium Grease 10 oz. 12 per Case2412 Disc Brake Quiet 8.5 oz. 12 per Case2420 Brake Cleaner 18 oz. 12 per Case4684 Fuel Injection Cleaner 8 oz. 12 per Case2212 DOT3 Brake Fluid 12 oz. 12 per Case2234 DOT3 Brake Fluid 32 oz. 4 per Case5000 Diesel Conditioner 12 oz. 12 per CaseTAC3913 Air Conditioner Odor Treatment 12 per CasePBBlaster Rust Penetrant 11 oz. 12 per Case
PART NO. DESCRIPTION
41128 12 x 1.25 Chrome Bulge Acorn - 3/4 Hex41138 12 x 1.50 Chrome Bulge Acorn - 3/4 Hex41148 14 x 1.55 Chrome Bulge Acorn - 3/4 Hex41178 7/16 “ Chrome Bulge Acorn - 3/4 Hex41188 1/2 “ Chrome Bulge Acorn - 3/4 Hex
71128 12 x 1.25 Chrome Acorn - 13/16 Hex71138 13 x 1.50 Chrome Acorn - 13/16 Hex 71178 7/16” Chrome Acorn - 13/16 Hex71188 1/2” Chrome Acorn - 13/16 Hex
PART NO. DESCRIPTION
91138 12 x 1.50 Chrome Bulge Acorn - 13/16 Hex91148 14 x 1.50 Chrome Bulge Acorn - 13/16 Hex91178 7/16” Chrome Bulge Acorn - 13/16 Hex91188 1/2” Chrome Bulge Acorn - 13/16 Hex
5844 12 x 1.25 OE Lug Nut - 21mm Hex5845 12 x 1.50 OE Lug Nut - 19mm Hex 5580R 7/16” OE Lug Nut - 3/4 Hex5581R 1/2” OE Lug Nut - 3/4 Hex 5586R 1/2” OE Lug Nut - 13/16 Hex
Leave the wrench on the bench..Get it off faster - with PB Blaster!
2812
2942
2418
4642
4603
4604
2412
2420
4602
TECHNICAL CHEMICAL COMPANY
REPLACEMENT LUG NUTS