r-series lcd monitor

HYUNDAI IT

Hyundai IT CO.LTD

Service Manual R-Series LCD Monitor

Model

- R247DP*

- R227DP*

Table of Contents

CHAPTER 1- PRECAUTIONS & SAFETY NOTICES ................................................................................................................ 3 1. SAFETY PRECAUTIONS ........................................................................................................................................................ 3 2. PRODUCT SAFETY NOTICE ................................................................................................................................................. 3 3. SERVICE NOTES .................................................................................................................................................................... 3

CHAPTER 2- SERVICE TOOLS & EQUIPMENT REQUIRED ................................................................................................. 4 CHAPTER 3- CIRCUIT THEORY ................................................................................................................................................ 5

1. BLOCK DIAGRAM ...................................................................................................................................................................... 5 2. GENERAL INFORMATION .......................................................................................... 오류! 책갈피가 정의되어 있지 않습니다. 3. DSUB PIN DESCRIPTION............................................................................................................................................................ 6 4. HDMI PIN DESCRIPTION.......................................................................................... 오류! 책갈피가 정의되어 있지 않습니다. 5. DISPLAY PORT PIN DESCRIPTION ................................................................................................................................................ 6 6. FFC CABLE PIN ASSIGNMENT .................................................................................................................................................. 7 7. KEY PAD PIN ASSIGNMENT ........................................................................................................................................................ 7 8. FACTORY PRESET TIMMING ........................................................................................................................................................ 7 9. INTERFACE ................................................................................................................................................................................ 8

9-1. SIGNAL INTERFACE ....................................................................................................................................................... 8 9-2. KEY PAD INTERFACE ..................................................................................................................................................... 9 9-3. CIRCUIT DIAGRAM ...................................................................................................................................................... 10 9-4 .PCB DRAWING .............................................................................................................................................................. 14

CHAPTER 4- DISASSEMBLY & ASSEMBLY ........................................................................................................................... 15 1. PRECAUTION ........................................................................................................................................................................... 15 2. DISASSEMBLE AND ASSEMBLE ................................................................................................................................................. 16 3. UNPACKING ........................................................................................................................................................................... 18 4. DISASSEMBLE PRODUCT .......................................................................................................................................................... 19

CHAPTER 5- MAINTENANCE .......................................................................................................................................... 20

1. FW UPGRADE ....................................................................................................................................................................... 20 2. BOM LIST............................................................................................................................................................................ 23

CHAPTER 6- TROUBLE SHOOTING ....................................................................................................................................... 29

1.NO POWER TROUBLE SHOOTING ................................................................................................................................................ 29 2. NO VIDEO TROUBLE SHOOTING ................................................................................................................................................ 30

CHAPTER 7- SERVICE PROCESS GUIDE ............................................................................................................................... 31

Service Manual

2

Chapter 1- PRECAUTIONS & SAFETY NOTICES

1. SAFETY PRECAUTIONS This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper used or installation may cause damage to the monitor as well as to the user.

WARNINGS: This monitor should be operated only at the correct power sources indicated on the label on the rear of the

monitor. If you’re unsure of the power supply in you residence, consult your local dealer or Power Company.

Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor should only be repaired by a qualified technician.

Do not remove the monitor Cabinet. There is high-voltage parts inside that may cause electric shock to human bodies.

Stop using the monitor if the cabinet is damaged. Have it checked by a service technician. Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable immediately

and consult your closed dealer. Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply

non-ammonia based cleaner onto the cloth, not directly onto the class screen. Do not place heavy objects on the monitor or power cord.

2. PRODUCT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety visual inspections and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Before replacing any of these components read the parts list in this manual carefully. The use of substitute replacement parts, which do not have the same safety characteristics as specified in the parts list, may create shock, fire, or other hazards.

3. SERVICE NOTES When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.

Keep wires away from high voltage, high temperature components and sharp edges. Keep wires in their original position so as to reduce interference.

Adjustment of this product please refers to the user’ manual.

Service Manual

3

Chapter 2- SERVICE TOOLS & EQUIPMENT REQUIRED

1. VIDEO TEST SIGNAL GENERATOR

2. AUDIO TEST SIGNAL GENERATOR

3. MULTIMETER

4. SCREW DRIVER

5. OSCILLOSCOPE

6. IRON

7. SOLDER

8. DP Cable and HDMI Cable and VGA CABLE (15PINS POINT TO POINT)

9. AUDIO CABLE

10. COLOR ANALYZER

11. ISP BOARD

Service Manual

4

Chapter 3- CIRCUIT THEORY

1. Block Diagram

2. General Information IC TSUMO58HT9-1

Signal

Resolution 1920*1200@60Hz， Colors 8BIT Hsync 31.5K Hz-83KHz Vsync 55Hz-75Hz

Port Input

VGA HDMI DISPLAY Port PC Audio in

Output Panel Interface：FFC (LVDS) Audio Output：2*1.5W

Power Power Input 12V,5V Power Output Panel_VCC：5V Low-power <0.5W。

Key Board 5 Five key The number of key could be change Led Indicator Blue single， Can be set to double colors by design。

mailto:1920*1080@144Hz

3. D-SUB Connector Pin Assignment

Pin Symbol Pin Symbol Pin Symbol 1 Red+ 6 Red_GND 11 GND 2 Green+ 7 Green_GND 12 DDC_DAT 3 Blue+ 8 Blue_GND 13 Hsync 4 GND 9 5V_VGA 14 Vsync 5 Cable Detect 10 NC 15 DDC_CLK

4. HDMI Connector Pin Assignment

Pin Symbol Pin Symbol Pin Symbol 1 HDMI_RX2+ 9 HDMI_RX0- 17 GND 2 GND 10 HDMI_RXC+ 18 +5V

3 HDMI_RX2- 11 DET_CABLE_HDMI 19 HPDHDMI_CTRL 4 HDMI_RX1+ 12 HDMI_RXC- 5 GND 13 NC 6 HDMI_RX1- 14 NC 7 HDMI_RX0+ 15 SCL_HDMI 8 GND 16 SDA_HDMI

5. DISPLAY Port Connector Pin Assignment

Pin Symbol Pin Symbol Pin Symbol 1 Lane 0+ 9 Lane 2- 17 AUX- 2 GND 10 Lane 3+ 18 HOT PLUG

3 Lane 0- 11 GND 19 Return 4 Lane 1+ 12 Lane 3- 20 DP_PWR(5V) 5 GND 13 GND 6 Lane 1- 14 GND 7 Lane 2+ 15 AUX + 8 GND 16 GND

15 10 5

6 1

11

Service Manual

6

6. FFC Cable (LVDS interface)

7. Key Pad Interface

1 Power

2 LED R

3 LED G

4 GND

5 Left

6 Right

7 Auto

8 Menu

9 UP

10 Down

8. FACTORY PRESET TIMING

RESOLUYION H-Freq (kHz) H-Pol V-Freq (Hz) V-Pol PIXEL Source 640 x 350 31.47 - 70.09 - 25.18 VGA 640 x 480 31.47 - 59.94 - 25.175 VGA 640 x 480 37.5 - 75 - 31.5 VGA 640 x 480 37.861 - 72.809 - 31.5 VGA 720 x 400 31.47 - 70.08 - 28.32 VGA 800 x 600 37.88 + 60.32 + 40 VESA 800 x 600 46.88 + 75 + 49.5 VESA 800 x 600 48.077 + 72.188 + 50 SVGA 800 x 600 35.156 + 56.25 ± 36 SVGA 1024 x 768 48.36 - 60 - 65 VESA 1024 x 768 56.476 - 70.069 - 75 XGA 1024 x 768 57.67 - 72 + 78.43 XGA 1024 x 768 60.02 + 75.03 + 78.75 VESA 1280 x 800 49.702 - 59.81 + 83.5 CVT-8 1280 x 800 62.8 - 75 + 106.5 1280 x 768 47.396 + 60 - 68.25 CVT 1280x 1024 63.98 + 60.02 + 108 VESA 1280x 1024 79.98 + 75.02 + 135 VESA 1360 x 768 47.7 + 60.01 + 85.5 VESA 1440 x 900 55.94 - 59.89 + 106.5 CVT 1.30MA 1440 x 900 70.6 - 75 + 136.75 1440 x 900 55.469 + 59.901 - 88.75 WXGA+ 1680x 1050 65.29 - 59.95 + 146.25 WSXGA 1680x 1050 64.67 + 59.883 - 119 WSXGA 1920x 1080 67.5 + 60 + 148.5 FHD

Service Manual

7

9. Interface 9.1 Signal Interface

Service Manual

8

9-2. Key Pad Interface

Service Manual

9

9-3. Circuit Diagram

Service Manual

10

Service Manual

11

Service Manual

12

Service Manual

13

9-4. PCB Drawing

Service Manual

14

Chapter 4- Disassemble and Assembly

1. Precaution

Product Category: Monitors and Displays

Marketing Name / Model [List multiple model if applicable] LCD Monitor / R247DP* Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description Tool Size (if applicable)

Scewdrivers Product Disassembly Process List the basic steps that should typically be followed to remove components and materials requiring selective tratement: 1. With the aid of a screwdriver, loosen the four screws of stand. 2. Loosen the two screws of rear cover with screwdriver and then disassemble the rear cover from set. 3. Disconnect the backlight wire from the panel. 4. Loosen the three screws of driver board with screwdriver then disassemble driver board from set. 5. Loosen the six screws of mainboard cover with screwdriver then disassemble mainboard cover from set. 6. Loosen the four screws of mainboard with screwdriver then disassemble mainboard from set. 7. Loosen the four screws of speakers with screwdriver then disassemble speakers from set. 8. Disconnect the LVDS cable from the panel. 9. Loosen the five screws of front frame with screwdriver. 10. Loosen the six screws of Middle frame with screwdriver then disassemble middle frame from set.

Service Manual

15

2. Disassemble and Assemble

Service Manual

16

Service Manual

17

3. Unpacking Drawing

1)Box Open 2) Take out cushion and product from box

4) Separate Stand from top Cushion

5) Separate Prroduct from Bottom Cushion 3) Separate the cushion from top to bottom.

Service Manual

18

4. Disassemble Product

1) Unscrew the screw using the driver. (*Tool)

2) Open Rear Cover with Tool.

3) Separate Rear Cover with Tool

Service Manual

19

4) Unscrew with Driver

5) Sreperate Plastic Mold from LCD Module

Screw Screw

Chapter 5- Maintence 1. FW Upgrade

Software upgrade approach

Option one：

Mstar serial port tools are needed to upgrade BIN file and primary

Jig <Program>

Mstar serial tool driver: FTC100103(Mstar)

Installation method:

Service Manual

20

1. Insert the serial port into the computer USB port.

2. The computer will recognize the USB hardware and prompt you to install it. Select the custom

driver path as FTC100103(MSTAR) folder.

3. After successful installation, it can be seen in the port in the device manager of the computer.

(COM ports vary from computer to computer)

Upgrade BIN method:

1. Connect the computer and board CARDS with serial port tools. (4Pin wire is connected to main

board J105 (above optical fiber), or VGA wire is directly connected to VGA interface)

2. Open isp_tool_4522.exe

3. Click to select the boot.bin file

Service Manual

21

1. After AC is powered on, click Connect.

2. The chip type will pop up after success. (the name shown below is for reference only)

If the connection fails, please re-power AC and reconnect.

1.Configuration according to the following Parameters.

1. Click on the , burin in the mboot.bin

The implementation process is as follows.

Service Manual

22

2.Tip for Pass when you're successful.

3. BIN file burning is completed.

Method 2, if the wrong software is burned, the WP foot of FLASH is locked and cannot write

data into FLASH, the FLASH component should be manually welded down and burned

separately with offline burning tool.

Service Manual

23

2. BOM LIST Iteam Item no Description QTY Remark

100101020790 MNT 23.6 inch neutral software M24B6 USA M24B6 black V+DP+A

M236HJJ-P02

10 200102049140 panel M24B6 M236HJJ-P02 C4 250 Hyundai 240mA 52.7V NTSC 72%

ES7.0 HK236WLEDM 1 Panel

10 220001001500 OC 23.6 CMI M236HJJ-P02 C4 0.046 1920x1080 VA 1

20 230101001570 Lamp stripe product M24A6 68 LED 4014 36 (>36) 2H 2G Aluminum

substrate 525.00X4.50X1.00MM M236HJJ-P02 1

40 230102002060 Light guide panel assembly parts M24A6 PMMA 2T Hot pressing

528.28x302.3mm Three-sided silver sticking 1

30 230105000750 White opposition M24A6 528.3X302.3MM V1 Structural change 1

60 230106002140 Diffusion film M24A6 Downward expansion 6531.88x301.97mm 2

TBD composite membrane M24B6 0 (90 °) 531.88x301.97mm 1

TBD composite membrane M24B6 0(0 °) 531.88x301.97mm 1

110 270101036220 Face frame M24B6 ABS Black Etching pattern print Hyundai LOGO

270101036420 Button die carving 1

120 270103000231 Middle frame M24B6 Pure PC HB 8600 Black Etching pattern add High

appearance 1

260 270104010340 bottom chassis M24A6 Lock horn SGCC 0.6T Reducing screw holes 1

140 270203000400 Light guide plate support column HA238 PC (black) 2

150 270701001140 Cross tapping screw CB2X4 low carbon steel Black zinc plating

0.9(Head Diameter 5 Thickness 0.9 ) 2

160 270702002010 Cross Tooth Screw CM1.7X2 low carbon steel Blue zinc plating 3.0

0.5(Head Diameter 3 Thickness 0.5 ) 12

170 270702002190 CM2.5X3 harden low carbon steel Blue zinc plating Φ5.4-5.6 0.6(Head

Diameter 5.4-5.6 Thickness 0.6 ) 3

70 280805000870 Bar code sticker copperplate paper) 65.00X35.00 CN 1

180 290101003310 Silicone pad HA238 grey 20X1.5X0.8 Gum surface 20X1.5 4

190 290101004320 Silicone pad M24A6 grey 20X2X1.1 Single side adhesive 20X2 2

200 290102004830 High density sponge M24A6 PORON black 526X5X0.6526X5X0.6

Hardness 38 deg Single side 3MM black adhesive glue 1

210 290102007730 High density sponge PORON black 527.5X3X0.8 Single side 3MM

9488 adhesive glue 1

220 290104001040 PET M24A6 soft PET black 515X30X0.075 Single side adhesive Under

PCB board 1

230 290104001050 PET M238T soft PET black 20X15X0.075 Fixed diaphragm hanging ear

and back plate 2

90 290104001630 PET 3229F black 20X6X0.075 Soft one-sided backing glue 2

240 290106003570 Double faced adhesive tape ) M24B6 NC1800KY-S black

527.5x3x0.86mm 1

250 290106003580 Double faced adhesive tape M24B6 NC1800KY-S black

299.5x3x0.86mm 2

100 290113001210 Conductive foam 24B1 black 534X3.5X0.6 Single side adhesive 1

80 290114000220 Conductive cloth 2176 50X5 non dioxin flame retardant 1

Service Manual

24

30 TBD M1 TSUMOP38CDMT9 VHDPA stand (double)8 D B10 5V with DC 1 Main board

1 260602001150 signal socket DP20P 17x16.5x4.76 SMTSMT 1

2 260603000270 FFC 1.0 30pin H=2.8mm white SMT SMT 1

3 260602000270 HDMI 19p in SMT 1

4 261001000160 The patch capacitance 0805 10uF 10V ±10% X5R 1

5 261001000700 The patch capacitance 0402 0.1uF 16V -20%+80% Y5VSMT 23


7 261001000640 The patch capacitance 0402 0.1uF 50V ±10% X7R 2

8 261001003920 The patch capacitance 0603 1uF 16V 0.6 Y5V 3

9 261001000660 The patch capacitance 0402 100pF 50V ±5% NPOSMT 2


11 261001000930 The patch capacitance 0402 47nF 16V ±10% X7R 6

12 261001000670 The patch capacitance 0402 1nF 50V ±10% X7RSMT 3

13 261001000770 The patch capacitance 0402 22pF 50V ±5% NPOSMT 3

14 261001000780 The patch capacitance 0402 220pF 50V ±10% X7R 1

15 261001000720 The patch capacitance 0402 1uF 10V -20%+80% Y5VSMT 9

16 261001003940 The patch capacitance 0603 10uF 6.3V ±10% X5R 3

17 261001000830 The patch capacitance 0402 2.2uF 6.3V ±20% X5R 2


19 261001000940 The patch capacitance 0402 0.47uF 16V -20%+80% Y5V 6

21 261001000870 The patch capacitance 0402 0.33uF 16V +-10% X5R 1

22 261001000590 The patch capacitance 1206 10uF 25V -20%+80% Y5V 2

23 261001003700 The patch capacitance 0805 220PF 100V ±10% X7R 1

24 261107000180 Switching diode BAT54C 30V 0.2A SOT-23 SMT 2

25 261101000410 Schottky diode SS310 100V 3A DO-214AA SMT 1

26 260901001750 SMD resistor 0402 0Ω ±1% SMT 2

27 261704000050 Magnetic beads 0603 30Ω/3A 2

28 261704000160 Magnetic beads 0402 80Ω/1.2A 3

29 260901000970 SMD resistor 1206 0Ω ±1% SMT 1

30 261701000610 Power inductor 6X6 10UH/4.5A 1

31 260901010000 SMD resistor 0805 0Ω 5% SMT 2

32 261704000110 Magnetic beads 0603 600Ω/1A 4

33 261701000280 SMT inductance 12X12X7.5 68uH SMT 5.7 1

34 261204000070 P MOS NCE3407 30V 4.1A SOT-23SMT 1

35 261201000050 NPN triode 3904 40V 0.2A SOT-23 SMT 4

36 261203000800 N-MOS MTB100N10RKJ3 100V 10A SOT-23 SMT 1

37 260901002900 SMD resistor 0603 2.2K ±5% braid 1

38 260901001820 SMD resistor 0402 100K ±5% braid 7




42 260901002170 SMD resistor 0402 56Ω ±1% braid 3




Service Manual

25








53 260901001830 SMD resistor 0402 1M ±5% braid 3











64 260901001700 SMD resistor 1206 0.1Ω ±1% braid 2


66 260901000790 SMD resistor 0805 4.7Ω ±1% braid 4



69 TBD SOT-23-6 1

70 260802000150 Linear voltage regulator IC az1117c-1.2 (1%) SOT223 SMTDIODES 1

71 260805000020 Store IC EEPROM24C02 SOP8 SMTROHM 2

72 TBD TSUMOP38CDMT9-1IC-129P-LQFP-14X14（scaler） 1

73 260805000050 Storage IC FLASHMX25L8006E(8M) SOP8 MXIC(wang h） 1

74 260806000040 IC PAM8003 SOP16 PAM 1

75 260803000020 Operational amplifier IC PAM8003 SOP16 PAM 1

76 260802000100 Linear voltage regulator IC az11175.0-3.3 V1% TO-223 SMTDIODES 1

1 260601000210 Dc-0050h 3pin diameter 2.0h =14mm vertical DIP disc mounting 1

2 260602000440 Signal socket VGA socket 15pin PCB 10.5mm to the card position

vertical DIP package SMT processing SMT 1

3 260603002480 Connector PH socket 2.0 pin distance H=4.7mm 10pin horizontal

white DIP bulk 1

4 260602001070 Audio socket 5PIN 18.6x10.1x6.1mm inner diameter 3.6mm vertical

black DIP bulk 1

5 260603000360 Connector socket PH 2.0 spacing 4pin H=4.7mm horizontal white DIP

bulk 1

6 260603000420 Connector socket PH 2.0 spacing 3p H=4.7mm vertical white DIP bulk 1

7 261002002730 Electrolytic capacitor 8x7x3.5mm 220UF 25V ±20% aluminum 3000H

stand 3MM powder 2

8 261002001350 CD al electrolytic capacitor 6.3x11x2.5mm 220uF 16V ±20%KF vertical

420mA3000H lead type 3mm bulk 2

Service Manual

26

9 261002002490 CD aluminum electrolytic capacitor 10x13x5mm 47uF 100V ±20%RF

vertical 480mA5000H guide type 3mm bulk 1

10 261902000020 Crystal oscillator 14.318MHZ L=5mm metal shield key 1

20 260142000300 Adapter SOY-120025OUSULB 30W 12V/2.5 Wall insertion 2.1 (sixth

grade) 1.5m With magnetic ring 1 Adapter

50 260153000360 keyboard HA-KEY 1.25-4Pin 5key Single Blue Voltage Scanning V1.1 1 Key Pad

10 260151001040 keyboard SMT HA-KEY1.25-4P 5key Single Blue Voltage Scanning V

11 1

70 260153000550 keyboard HA-KEY 1.25-4P 5key 78X10MM Single Blue Voltage V1.1 1

10 260603000090 Connector socket 1.25 4pin H=3.7mm Vertical (Ivory) SMT

SMT(taping) 1

20 260701000140 Tact Switch TVCM16-020CY-R4x4x2.0mm 4pin 250V Vertical SMTSMT

taping BeiJiaer 5

30 260901001800 SMD resistor(chip resistor ) 0402 10K ±5% SMT(taping) 2

40 260901001900 SMD resistor(chip resistor ) 0402 2K ±5% SMT(taping) 1

50 260904000080 Varistor 18KV 5

60 261105000120 LED light-emitting diode blue 1206 3V 10MA Plain bright SMD 1

190 260301000030 Internal magnetic horn boxed 8 euro 2W welding 500Hz Hole

spacing 73mm L50mm 2

180 260502000020 Horn wire 2468#26 2.0 Rubber shell 4P 2PP R250mm100mm 1

120 260502000500 Electron wire UL10368#28 PH2.06P NH-4P L250mm 1

110 260502002440 Keyline UL2651#30 2.0 Rubber shell 5P 1.25(Buckle ) 4P 300mm 1

130 260503000140 HDMI cable 20276 OD=5.5 (Black double head) HDMI 19P 1800mm

With magnetic ring 1

140 260503000960 DP cable Black line doeble head DP L=1800mm 1

170 260503001020 audio 3.5mm Stereo line blackg diameter 3.5(plug) Lengh=1.5m 1

70 260505001390 Electronic screen line FFC Opposite head 1.0 spacing FI-30P tail FFC

L=180mm Z (Folding single-sided aluminium foil ) 1

200 270105000650 back cover M24B6 ABS GAR 011C black Etching pattern V+DP

origianl 279101021052 1

230 270201003080 Horn bracket A6 serie SGCC T=1.0 natural color 4

240 270201003170 Wall hanger A M25A6 SGCC U T=0.6 natural color 1

250 270201021300 Wall hanger B M25A6 SGCC T=0.8 natural color U Modification of

Blanking Die for U-shaped Wall-hanging Parts 2

450 270201027450 Bracket M25A6 ABS GAR 011C Moulding with Black Corrosion Fine

Lines to Prevent Stalking 0.082KG (origianl)279101021052 1

440 270202000130 Bracket cover M25A6 ABS GAR 011C Black etched fine lines

(origianl)279101021052 1

460 270205009870 Base M21A6 ABS GAR 011C Moulding with Black Corrosion Fine Lines

to Prevent Stalking 0.135KG (origianl)279101021052 1

270 270501000040 Main board shielding cover B6 SGCC T=0.6 natural color V+DP 1

280 270602000190 Rotating shaft 21P2 2T Appearance blackening 1

290 270701000900 Cross tapping screw KA2X8 Black galvanized low carbon steel head

diameter 4.5 1

300 270702000190 Cross Tooth Screw PM3X5 Black galvanized low carbon steel 2

310 270702001210 Cross Tooth Screw TM3X6 Non-standard (Blue Zinc for Low Carbon

Steel ) (add)D=3.3 Stepped hole lock motherboard 7

Service Manual

27

320 270702002430 Cross Tooth Screw CM3X3 Blue Zinc for Low Carbon Steel Head

Φ5.5 Head thickness 0.6 8

330 270702002590 Cross Tooth Screw CM3X3 Blue Zinc for Low Carbon Steel Head

Φ7.8-8 Head thickness 0.9 4

340 270705000130

Triple cross screw PM4X12 Drop Resistance Treatment of Low

Carbon Steel with Hard Black Zinc Plating

Meson outer diameter 8 thickness 0.8

2

350 270708000310 Six angle stud (H)4.9 (outer)Φ3.7X2.7 (Lock VGA standard hexagon

nut ) 2

360 280106001480 Blank calf carton (BE pit ) 24P3 (Knife 606x127x440 withstands

breaking 12Kg/cm BHP 4.5KN/m moisture content of 11+3%.) 1

370 290101000010 Silicone pad Single Back 3M-9448 Rubber with Lattice (Base foot

pad ) 6

90 290111000190 Conductive aluminum foil 40X35 (Double-sided Conductive

Single-sided Back Glue ) 1

100 290113000400 Conductive foam (Single VGA interface ) 1

80 290113000560 Conductive foam Single side adhesive 1

380 290202000560 EPE white(wihte) 620x460x0.5 Loading assembly machine 1

390 290203000930 PE bag clear 300X165X0.03 Black font warning slogans 1

400 290203001050 PE(bag) (clear) 250X300 English Screen Printing Environmental

Protection Sign Warning Language to Mount column 1

410 290203001360 PE(bag) clear 140X200 Intermediate punch 1

420 290205003740 polyfoam M24A6 EPS white 596X120X416 P6S6YXC Compatible Base 1

430 290217000010 Handle PP material 165X35X0.75MM (Carton handle ) 1

160 300201000040 (Patent fees ) HDCP KEY 1

150 990004000050 List of Production Accessories MNT 20.5 to 32 inches 1

130 280805000990 Blank copperplate paper 30x12 CN 4

10 280805001830 Sticker copperplate paper 2136 MONITOR 77x105 Chinese neutral

bold characters 1

120 290109000090 Acetate adhesive tape black 80x20 Single side adhesive 1

100 290110000040 Fiber tape white 15X70 3

20 290209000030 Stretch film PE NW 3KG 450X0.025MM Apply to ROHS 0.0075

30 290211000040 Sealing tape 500MX60MM (Hui Li Bang) 2

50 290211000390 Transparent adhesive 10MMX30Y 0.03

40 290302000010 Gummed paper 15MMX30Y(1Y=0.915M) (Y-code is an English unit

of measure, capitalized ) 0.08

110 290304000800 Tool Water ethanol (industrial alcohol) 99% alcohol content)

(NW)11.5KG 15L/(bucket) 2

60 290305000060 Ribbon style : E9101 (Mixed basis) 110mmx300m 0.12

90 290305000090 Resin ribbon (black) RICOH B120HS 300m*80mm 0.0375

80 290306000040 Lead free solder wire 1.2MM99.3SN/0.7CU 0.006

70 290308000060 tool Hot melt adhesive tape UL standard 914W single length weitht

32G 0.00971

Box 1

Paper Cushion Top 1

Paper Cushion Bottom 1

Service Manual

28

Chapter 6- TROUBLE SHOOTING GUIDE

1. NO POWER

Service Manual

29

2. NO VIDEO

Service Manual

30

Chapter 7-SERVICE PROCESS GUIDE

HIT Authorized Service Center Locations AVC Tech 777 Mark St., Wood Dale, IL 60191 Tel : 800-568-0080 or 630-595-0123 Fax : 630-595-2345 Email : [email protected] Web site : www.Hyundaimonitor.com

GOVERNMENT ADVANCED EXCHANGE WARRANTY PROGRAM INSTRUCTIONS (Government Purchasers only)

COMPUTER MONITORS Brand New

Exchange Unit (DOA)

Repair Service (NON-DOA)

Under 30 Days

of purchase date.

Freight Term: Hyundai Service Center

will pay both ways. (Except Alaska & Hawaii)

36 Months (3 Years) Warranty of Monitor

Freight Term:

Hyundai Service Center will pay both ways.

(Except Alaska & Hawaii)

How to get the warranty service: To obtain warranty service, please contact Hyundai IT (ImageQuest) via www.hyundaimonitor.com Customer Support for a Return

Instructions for Government customers:

Go to: www.hyundaimonitor.com

Click: Section titled customer service

Next Click section titled: US GOVERNMENT CUSTOMERS

Next select agency or contract monitor was purchased through (if no present select section titled other) Next agree to terms and conditions Next fill out requested information including serial numbers Select request for advanced unit or repair service based on chart above Last click submit RMA will be processed within 48 hours and you will receive instructions for processing the service of the unit.

To obtain an Authorization Number (RMA). You will be required to provide: A. Agency and/or Company name. B. Your name. C. Your address & Phone number, email address D. The model number & serial number of the product E. A description of the problem.

NOTE: Hyundai is not responsible for any returned product without an Assigned RMA number.

http://www.hyundaimonitor.com/

http://www.hyundaimonitor.com/

r-series lcd monitor

Documents