Upload File

rack mount interconnect center (ric3) - the siemon...

  • Home
  • Documents
  • Rack Mount Interconnect Center (RIC3) - The Siemon …files.siemon.com/...ric_rack_mount_interconnect_center_spec-sheet.pdfRack Mount Interconnect Center (RIC3) The RIC3 provides the
4
Rack Mount Interconnect Center (RIC3) The RIC3 provides the best overall value for exceptional fiber management. The RIC3 enclosure offers superior fiber density without sacrificing fiber protection and accessibility. Features include a fully removable tray, improved labeling, standard front and rear door locks, and single-finger door latches. With superior cable management, port identification, fiber accessibility and security, the RIC3 is the best way to protect mission critical fiber connections. Removable Tray The RIC3 cable management tray is fixed in place, but can be removed from the front or rear of the enclosure and moved to a work table for greater convenience. Enhanced Labeling — Label virtually any port configuration with our hinged labels. The labels hang on the front door for improved visibility. When the door is opened, labels flip down allowing ready viewing of the label and corresponding ports Rotating Grommets — Patented rotating grommets facilitate loading and retention of jumpers and fiber while minimising microbending stress when using the sliding tray Complete Access — Management tray has a positive stop in both front and rear working positions providing complete access for moving, adding, changing, or cleaning of fiber connections Maximum Capacity — The RIC3 enables a maximum amount of fibers to be patched or patched and spliced in a 2, 3, and 4U enclosure without compromising accessibility. This allows more efficient utilisation of rack space Superior Design — Top and bottom access holes located at the rear of the enclosure allow fibers to be routed between tandem enclosures without having to run fibers outside of the enclosure Quick-Release Hinges — Spring loaded quick-release hinges enable easy opening and removal of front and rear doors for complete access to fiber connections Latching and Locking The RIC3 features a single-finger latch on both front and rear doors. Front and rear doors include a lock for added security. Quick-Pack ® Adapter Plates Siemon Quick-Pack adapter plates can be inserted or removed with a single-finger latch for quick and easy access to fiber connections.

Upload: vothien

Post on 08-Mar-2018

226 views

Category:

Documents


3 download

Report

TRANSCRIPT

Page 1: Rack Mount Interconnect Center (RIC3) - The Siemon …files.siemon.com/...ric_rack_mount_interconnect_center_spec-sheet.pdfRack Mount Interconnect Center (RIC3) The RIC3 provides the

Rack Mount Interconnect Center (RIC3)The RIC3 provides the best overall value for exceptional fiber management.

The RIC3 enclosure offers superior fiber density without sacrificing fiber

protection and accessibility. Features include a fully removable tray,

improved labeling, standard front and rear door locks, and single-finger

door latches. With superior cable management, port identification, fiber

accessibility and security, the RIC3 is the best way to protect mission critical

fiber connections. Removable TrayThe RIC3 cable management tray is fixed inplace, but can be removed from the frontor rear of the enclosure and moved to awork table for greater convenience. Enhanced Labeling — Label virtually any port

configuration with our hinged labels. The labelshang on the front door for improved visibility.When the door is opened, labels flip downallowing ready viewing of the label andcorresponding ports

Rotating Grommets — Patented rotating grommetsfacilitate loading and retention of jumpers and fiber whileminimising microbending stress when using the slidingtray

Complete Access — Management tray has a positive stopin both front and rear working positions providing completeaccess for moving, adding, changing, or cleaning of fiberconnections

Maximum Capacity — The RIC3 enables amaximum amount of fibers to be patchedor patched and spliced in a 2, 3, and 4Uenclosure without compromisingaccessibility. This allows more efficientutilisation of rack space

Superior Design — Top and bottom access holeslocated at the rear of the enclosure allow fibers tobe routed between tandem enclosures withouthaving to run fibers outside of the enclosure

Quick-Release Hinges — Spring loaded quick-releasehinges enable easy opening and removal of front andrear doors for complete access to fiber connections

Latching and LockingThe RIC3 features a single-finger latch onboth front and rear doors. Front and reardoors include a lock for added security.

Quick-Pack® AdapterPlatesSiemon Quick-Pack adapter plates can beinserted or removed with a single-fingerlatch for quick and easy access to fiberconnections.

SS_RIC3_QckPack_C.qxp_Layout 1 4/19/18 3:11 PM Page 1

Page 2: Rack Mount Interconnect Center (RIC3) - The Siemon …files.siemon.com/...ric_rack_mount_interconnect_center_spec-sheet.pdfRack Mount Interconnect Center (RIC3) The RIC3 provides the

Siemon RIC3 enclosures are designed for enhanced fiber management and ease of use. They are compatible with an array of Siemon fiber Quick-Pack® and MTP adapterplates for your choice of fiber adapters and port density.

RIC3-48-01 . . . . . . . . . . . . . . .48- to 192-fiber (up to 768 fibers with MTP adapter plates)Rack Mount Interconnect Center, accepts (8) Quick-Pack adapter plates, 3U , black

. . . . . . . . . . . . . . . . . . . . .height: 133mm (5.2 in.) . . . . . . . . . . . . . . . . . . . . .width: 432mm (17.0 in.) . . . . . . . . . . . . . . . . . . . . .depth: 380mm (15.0 in)

RIC3-72-01 . . . . . . . . . . . . . . . .72- to 288-fiber (up to 1152 fibers with MTP adapter plates)Rack Mount Interconnect Center, accepts (12)Quick-Pack adapter plates, 4U, black

. . . . . . . . . . . . . . . . . . . . .height: 178mm (7.0 in.) . . . . . . . . . . . . . . . . . . . . .width: 432mm (17.0 in.) . . . . . . . . . . . . . . . . . . . . .depth: 380mm (15.0 in)

Part # Description

RIC3-24-01 . . . . . . . . . . . .24- to 96-fiber (384 fibers with MTP adapter plates) Rack Mount Interconnect Center, accepts (4)Quick-Pack adapter plates, 2U, black

. . . . . . . . . . . . . . . . . . . . .height: 86.6mm (3.4 in.) . . . . . . . . . . . . . . . . . . . . .width: 432mm (17.0 in.)

. . . . . .depth: 380mm (15.0 in)

Part # Description

RIC3-36-01 . . . . . . . . . . . . . . .36- to 144-fiber (up to 576 fibers with MTP adapter plates)Rack Mount Interconnect Center, accepts (6)Quick-Pack adapter plates, 2U, black

. . . . . . . . . . . . . . . . . . . . .height: 86.6mm (3.4 in.) . . . . . . . . . . . . . . . . . . . . .width: 432mm (17.0 in.) . . . . . . . . . . . . . . . . . . . . .depth: 380mm (15.0 in)

Note: 1U = 44.5mm (1.75 in.)

Note: All RIC products include laser-printable labels*, cable ties, rack-mounting hardware, and pre-installed fiber management clips.

*Visit www.siemon.com for labelling software.

Rack Mount Interconnect Center (RIC3)

# Fibers per Quick-Pack Adapter Options RIC24 RIC36 RIC48 RIC72

6 ST, SC 24 36 48 728 ST, SC 32 48 64 96

12 ST, SC, LC 48 72 96 14416 LC 64 96 128 19224 LC 96 144 192 28896 MTP 384 567 768 1152

MAXIMUM RIC3 FIBER CAPACITY

MAXIMUM SPLICING CAPACITY

Splice Type RIC24 RIC36 RIC48 RIC72

Fusion 96 96 96 144

SS_RIC3_QckPack_C.qxp_Layout 1 4/19/18 3:11 PM Page 2

Page 3: Rack Mount Interconnect Center (RIC3) - The Siemon …files.siemon.com/...ric_rack_mount_interconnect_center_spec-sheet.pdfRack Mount Interconnect Center (RIC3) The RIC3 provides the

Siemon’s patented Quick-Pack adapter plates feature an integrated latch, which provides single-finger access to fiber even in fully populated enclosures.

RIC-F-SA6-01 . . . . . .

3 duplex ST adapters (6 fibers)

RIC-F-SA8-01 . . . . . .

4 duplex ST adapters (8 fibers)

RIC-F-SA12-01 . . . . .

6 duplex ST adapters (12 fibers)

Only recommended forpush-pull ST connectorsdue to limited access

RIC-F-BLNK-01. . . . .

Blank adapter plate

XGLO® & LightSystem®

Quick-Pack® Adapter Plates

LightSystem®

RIC-F-SC6-01 . . . . . . . . . . . . . .

3 duplex SC adapters (6 fibers)

RIC-F-SCQ6-01 . . . . . . . . . . . . .

3 duplex SC adapters (6 fibers), aqua adapters (not shown)

RIC-F-SC8-01 . . . . . . . . . . . . . .

4 duplex SC adapters (8 fibers)

RIC-F-SCQ8-01 . . . . . . . . . . . . .

4 duplex SC adapters (8 fibers), aqua adapters (not shown)

RIC-F-SC12-01 . . . . . . . . . . . . .

6 duplex SC adapters (12 fibers)

RIC-F-SCQ12-01 . . . . . . . . . . . .

6 duplex SC adapters (12 fibers), aqua adapters (not shown)

RIC-F-L(X)12-01C . . . . . . . . . . .

3 quad LC adapters (12 fibers), beige adapters(not shown)

RIC-F-L(X)U12-01C . . . . . . . . . .

3 quad LC adapters (12 fibers), blue adapters(not shown)

RIC-F-L(X)Q12-01C . . . . . . . . . .

3 quad LC adapters (12 fibers), aqua adapters

RIC-F-L(X)16-01C . . . . . . . . . . .

4 quad LC adapters (16 fibers), beige adapters(not shown)

RIC-F-L(X)U16-01C . . . . . . . . . .

4 quad LC adapters (16 fibers), blue adapters(not shown)

RIC-F-L(X)Q16-01C . . . . . . . . . .

4 quad LC adapters (16 fibers), aqua adapters

RIC-F-L(X)24-01C . . . . . . . . . . .

6 quad LC adapters (24 fibers), beige adapters(not shown)

RIC-F-L(X)U24-01C . . . . . . . . . .

6 quad LC adapters (24 fibers), blue adapters(not shown)

RIC-F-L(X)Q24-01C . . . . . . . . . .

6 quad LC adapters (24 fibers), aqua adapters

RIC-F-SCE6-01 . . . . . . . . . . . . .

3 duplex SC adapters (6 fibers), erika violet adapters(not shown)

RIC-F-SCE8-01 . . . . . . . . . . . . .

4 duplex SC adapters (8 fibers), erika violet adapters(not shown)

RIC-F-SCE12-01 . . . . . . . . . . . .

6 duplex SC adapters (12 fibers), erika violet adapters(not shown)

RIC-F-L(X)E12-01C . . . . . . . . . .

3 quad LC adapters (12 fibers), erika violet adapters

RIC-F-L(X)E16-01C . . . . . . . . . .

4 quad LC adapters (16 fibers), erika violet adapters

RIC-F-L(X)E24-01C . . . . . . . . . .

6 quad LC adapters (24 fibers), erika violet adapters

Each adapter plate with icon pockets includes red, blue, black, and clear icons with paper labels. All SC and ST adapters are “universal” to support Multimode and Singlemode.

Fiber Management Tray (FMT)The Siemon Fiber Management Tray (FMT) is an economical solution for managing fiber cable slack and splice trays. The management tray has been designed to easily retrofitany standard 1 RMS CT® or MAX® Series Patch Panel and can organise up to 32 fibers. The tray is only 254mm deep, allowing it to readily fit into cabinet enclosures. Eachenclosure can accept up to two fiber splice trays.

Part # Description RMS

CT-FMT-16 . . . . . . . . . . . Fiber tray for 1U CT or MAX Panel . . . . . . . . . . . . . . . . . . . . . . . 1

Note: 1U = 44.5mm

(X)C = Standard LC AdapterS = Shuttered LC Adapter

* Optional Shuttered LC adapters feature a small plastic shutter door thatopens upon insertion without touching the connector endface and springsback into the closed position upon removal to ensure protection of emptyports.

SS_RIC3_QckPack_C.qxp_Layout 1 4/19/18 3:11 PM Page 3

Page 4: Rack Mount Interconnect Center (RIC3) - The Siemon …files.siemon.com/...ric_rack_mount_interconnect_center_spec-sheet.pdfRack Mount Interconnect Center (RIC3) The RIC3 provides the

SS_R

IC3_

Qck

Pack

_B

1/18

Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.

Worldwide Headquarters North AmericaWatertown, CT USA

Phone (1 ) 860 945 4200

Regional Headquarters Europe Russia AfricaChertsy, Surrey, England

Phone (44 ) 0 1932 571771

Regional Headquarters ChinaShanghai, P.R. China

Phone (86) 215385 0303

Regional Headquarters Latin America Bogota, Colombia

Phone (571) 657 1950/51/52

Regional Headquarters India Middle EastDubai, United Arab Emirates

Phone (971) 4 3689743

Siemon Interconnect SolutionsWatertown, CT USAPhone (1 ) 860 945 4213 US

www.siemon.com/SIS

Regional HeadquartersAsia PacificSydney, Australia

Phone (61) 2 8977 7500

SS_RIC3_QckPack_C.qxp_Layout 1 4/19/18 3:11 PM Page 4


Interconnect 2012

Interconnect - POAL

VoIP Interconnect

IP interconnect

Interconnect (1)

42LK520 Interconnect

Interconnect Presentation

1 Interconnect/Via. 2 Delay of Devices and Interconnect

Apccas92 Interconnect

Interoperable Communications Technology...Infinimux G4 Rack MountInfinimux G4 Rack Mount Infinimode Systems Inc. Features and Function • Infinimux G4 is a modular interconnect system

Interconnect Architectures

Surface Mount Wall PIR Light Controller · •Terminal or Electricians screwdriver. •Small philips screwdriver. •Wire •Suitable mains interconnect cable. This product is suitable

Interconnect Al

Interconnect 2

4 Interconnect

Multi-functional Interconnect Co-optimization for … Interconnect Co-optimization ... Integrated Circuits ... 2.2 Power Interconnect Ina3Dstacked IC,powerisfedfromthepackage through

Wall Mount Interconnect Centre (SWIC3) - The Siemon …files.siemon.com/...wall-mount-interconnect-unit-swic3_spec-sheet.pdf · The Wall Mount Interconnect centre(SWIC3) is a cost-effective

Interconnect Synthesis

Interconnect Basics

CSG INTERCONNECT

Interconnect Solutions

PMP InterConnect

2009 Interconnect

Interconnect Impedance Measurements, Signal …qtwork.tudelft.nl/~schouten/linkload/tdrwshop.pdf · 1 The Interconnect Modeling CompanyŽ Interconnect Impedance Measurements, Signal

EENY10 Interconnect

Technology · • Introduction of new and unique connector products to the electronics industry. ... interconnect solutions ... (90º) printed board mount terminations. Five connector

Digital Integrated Circuits© Prentice Hall 1995 Interconnect COPING WITH INTERCONNECT

Optical Interconnect

Interconnect & Communication

Diameter Signaling Router · 2019-04-04 · Oracle® Communications Diameter Signaling Router Rack Mount Server Network Interconnect Guide Release 8.4 F12330-01 April 2019

14 Interconnect

Interconnect Performance Modeling. Performance modeling Given an interconnect topology, routing, and other parameters, predict the interconnect performance

FHD Optic Wall Mount Enclosure - FS · FHD Optic Wall Mount Enclosure FHD Fiber Optic Wall Mount Enclosures can be used as an interconnect or cross-connect in any telecommunications

DesignCon 2016 - Samtec Microelectronicssuddendocs.samtec.com/notesandwhitepapers/designcon2016...of cable connectors but are lacking for board mount video interconnect. A method to

AXI4-Stream Interconnect v1 - Xilinx · AXI4-Stream Interconnect v1.1 4 PG035 October 4, 2017 Product Specification Introduction The AXI4-Stream Interconnect is a key interconnect