Radio Remote Controls

K-Series Radio Remote ControlsThe K-Series Radio Remote Controls are suitable for most standard overhead travelling crane applications. Phase Lock Loop (PPL) system creates distinct narrow band

operating frequencies, set by software. Units are C-Tick approved by the Australian Communications and Media Authority with 70 non-licensed operating channels

available on the 433-434MHz band. Units are also fully compliant with the requirements of AS1418.1-2002.

- Emergency Stop (EMS) is independently certifi ed EN-ISO 13849-1

Category 4 Safety of Machinery: Safety-related parts of control systems

- Transmitter EMS mushroom features 2 × N/C switches

- Receiver features dual independent CPUs (microcontrollers) which

monitor each other and will execute emergency stop if one CPU fails

- Receiver features dual series-connected main relays, each controlled

separately by 2 × different CPUs and will execute emergency stop‚

if one main relay fails

- Current sensing “jammed relay” detection on function relays

Extensive Safety Features

- 2-speed buttons with distinctive position detents

- Large mushroom E-Stop button (twist to reset)

- Integrated internal antenna

- Removable waterproof key

- 3 stage low power indicator (visual and audible)

- 4 × standard alkaline or rechargeable AA batteries

Transmitter Features

- Integrated horn / alarm built into receiver

- Visible external power indicator

- F-Type antenna for easy antenna extension

- Pre-wired with 2m loom multi-core cable

- Vibration dampening rubber bushing mounts

- 48 / 240 / 415V AC or 24V DC power supply

Receiver Features

Dual Frequencies: At start-up the radio control automatically selects frequency less likely to suffer interference

Adjustable Emission Power: Transmitter power can be adjusted (ie, lowered) as required for different applications and industry types (8 settings possible)

Remote Pairing: New transmitters (without data fi le) can be paired to an existing receiver without accessing the receiver installed on the crane

“Power On” Switch / Key: Non-contacting reed switch is also a removable key to disable transmitter

Temperature Stabilization: Temperature Control Crystal Oscillator (TXCO) prevents frequency deviation due to temperature changes

Changing Functions: Pushbutton functions and system settings are changed via PC software

Programmable Functions: Numerous possible non-standard functions include inching, acceleration delay, interlock delay, magnet control, etc.

Other Features of K-Series

K-Series Specifi cations

Operating Range: Minimum 100m

Frequency Range: 433.05 – 434.775MHz

70 channels with 25kHz channel spacing

Emission Power: Less than 10mW (adjustable, 8 levels)

ID Code: Over 1 million sets

Hamming Distance: ≥ 4

Enclosures: Glass fi bre reinforced nylon, IP65

EMS Stop EN-ISO 13849-1 Cat. 4

K2 Receiver Wiring Diagram

K2 Series

(1) AC-1

(2) AC-2

(3) MAIN-IN

(4) MAIN-OUT

(5) COM 1

(6) UP 1S

(7) UP 2S

(8) DOWN 1S

(9) DOWN 2S

COM 2 (10)

EAST 1S (11)

WEST 1S (12)

E/W 2S (13)

COM 3 (14)

SOUTH 1S (15)

NORTH 1S (16)

S/N 2S (17)

COM 4 (18)

AUX 1 (19)

AUX 2 (20)

AUX 2S (21)

COM 5 (22)

ALARM (23)

6.3A (F4)

6.3A (F5)

0.5A (F1)

6.3A (F2)

DB1

DB2

6.3A (F3)

RED

8-Button, 2-Speed with E-Stop

Kit Part Numbers:

- SAGA1-K2

AC Supply: 48 / 240 / 415V AC

- SAGA1-K2-24V DC

DC Supply: 24V DC

Kit consists of:

- 2 × Transmitters + 1 × Receiver

- 2 × Protective Pouches

- 8 × AA Alkaline Batteries

- Installation Manual

Transmitter Receiver

Part No. SAGA1-K2TX SAGA1-K2RX

Dimensions 167 × 48 × 55mm 167 × 154 × 88mm

Weight 210g 2100g

Power 4 × AA Batteries AC or DC supply

K4 Series

K4 Receiver Wiring Diagram

(1) AC-1

(2) AC-2

(3) MAIN-IN

(4) MAIN-OUT

(5) COM 1

(6) UP 1S

(7) UP 2S

(8) DOWN 1S

(9) DOWN 2S

(10) COM 2

(11) EAST 1S

(12) WEST 1S

(13) E/W 2S

COM 3 (14)

SOUTH 1S (15)

NORTH 1S (16)

S/N 2S (17)

COM 4 (18)

R1 (19)

R2 (20)

R1/2 2S (21)

R3 (22)

R4 (23)

R3/4 2S (24)

AUX 1 (25)

AUX 2 (26)

AUX 2S (27)

COM 5 (28)

SW A (29)

SW B (30)

0.5A (F1)

6.3A (F2)

6.3A (F3)

6.3A (F4)

RED

6.3A (F5)

12-Button, 2-Channel, 2-Speed with E-Stop

Kit Part Number:

- SAGA1-K4

AC Supply: 48 / 240 / 415V AC

Kit consists of:

- 2 × Transmitters + 1 × Receiver

- 8 × AA Alkaline Batteries

- Installation Manual

Transmitter Receiver

Part No. SAGA1-K4TX SAGA1-K4RX

Dimensions 274 × 77 × 42mm 310 × 160 × 95mm

Weight 385g 2900g

Power 4 × AA Batteries AC supply

K-Series Radio Remote Controls

The Protean-HT Radio Remote Control is ideal for controlling monorail hoists. Quartz crystals create distinct stable operating frequency. Unit is C-Tick approved by the

Australian Communications and Media Authority with 7 non-licensed operating channels on the 433-434MHz band.

Protean HT Radio Remote Controls

Protean HT

0.5 A

10 A

B

POWER 1WIRE COLOUR

BLACK

POWER 2 BROWN

COM (MAIN) RED

MAIN (COM) ORANGE

UP YELLOW

DOWN GREEN

EAST BLUE

WEST VIOLET

U/D 2S GREY

E/W 2S WHITE

RO/START PINK

Protean HT Wiring Diagram

4-Button, 2-Speed with E-Stop

Kit Part Numbers :

- 700PRO6DHT

AC Supply: 24 / 48V or 240 / 415V

- 700PRO6DHT-24VDC

DC Supply: 12 ~ 24V DC

Transmitter Receiver

Part No. 701PROL6B-TX 701PROL6B-RX

Dimensions 167 × 48 × 55mm 161 × 74 × 52mm

Weight 210g 2100g

Power 2 × AA Batteries AC or DC supply

Kit consists of:

- 2 × Transmitters + 1 × Receiver

- 2 × Protective Pouches

- 4 × AA Alkaline Batteries

- Installation Manual

Optional Accessories

Passive Antenna Protective Covers

© C

ondu

ctix

-Wam

pfl e

r | 2009 | s

ubje

ct t

o te

chni

cal m

odifi

catio

ns w

ithou

t pr

ior

notic

e Victoria (Head Offi ce)

14 England Street

Dandenong VIC 3175

Phone: +61 3 9706 8844

Fax: +61 3 9794 9298

New South Wales

4/77 Newton Road

Wetherill Park NSW 2164

Phone: +61 2 9604 9800

Fax: +61 2 9604 9844

Queensland

2/9 Archimedes Place

Murarrie QLD 4172

Phone: +61 7 3902 6000

Fax: +61 7 3902 6001

Western Australia

6/133 Kelvin Road

Maddington WA 6109

Phone: +61 8 9452 1986

Fax: +61 8 9459 0503

sales-australia@conductix.com

www.conductix.com

www.conductix.com

PUSH BUTTONPENDANTS ANDACCESSORIES

For the control of:

• Cranes

• Hoists

• Material handling

equipment

• Lift tables

• Transfer carswww.conductix.com.au

• Supplied fully assembled or in component form.

• Wide variety for easy customisation.

• Two to twelve buttons or up to twenty four

buttons in a duplex configuration.

• Compact safety yellow enclosure.

• High impact LEXAN polycarbonate or chemical

resistant XYLON enclosures.

• One, two and three speed switches.

• Neoprene booted buttons.

• Two-piece enclosure simplifies field wiring.

• Easy force and positive detent

switches/buttons.

Buttons:Neoprene booted buttons seal

out dirt and moisture. Available

in red, green and black.

Jumpers:Included with all

pre-assembled

pendants.

COB81P & COB81.5Ppistol grip pendants

Button legends:Standard button legends are included.

Vertical, selector and mushroom

legends are also available.

Fasteners:Self-captive stainless steel hardware

and threaded inserts in housing to

prevent thread stripping.

Cable bushings:Available in 8 sizes from

7.5mm to 29.5mm.

Bushing collar:Two sizes for cable

diameters from 7.5mm

to 29.5mm.

Hanger ring:For external strain relief

connection. ‘S’ hook is

available for strain relief

cable connection.

Enclosure:Ergonomic design, visible

safety yellow, shock and

vibration resistant, rugged

LEXAN polycarbonate or

XYLON. 2 through 12 button.

Regular or deep style.

Two-piece enclosure

simplifies field wiring.

Cable packing gland:Furnished with bushing and available

in 16 sizes. Insures water-tight seal.

Lamp and horn switch:Knock-out holes in 12mm dia.

and 19mm dia. are available for a

lamp and horn switch on 6

through 12 button enclosures.

• -15OC to 70O operation.

• UL listed and CSA approved.

• Contacts rated 5A at 120VAC & 3A at 240VAC.

• NEMA 4X (IP 56) enclosure rating.

• 100g shock resistance.

• Double insulated 2500V withstand voltage.

• Indoor or outdoor use.

FEATURES

Operation Appearance Wires✱✱ Part number(s) Contact arrangement

Pilot light small12mm. dia. hole

Colour: Red

(Voltage in parentheses)

1

35293 - (110VAC)36082 - (220VAC)36087 - (12VDC)34315 - (24VDC)

LED light ✱

Pilot light large19mm. dia. hole

Colour: Red

(Voltage in parentheses)

1

34316 - (110VAC)36083 - (220VAC)36088 - (12VDC)36081 - (24VDC)

Neon light ✱

Momentary push button

switch for horn 19mm. dia. hole

1 34312Resistive load ✱

125VAC 6A250VAC 3A

Pilot light

(Takes up onebutton space)

1

36042 - (24VDC)35181 - (12VDC)34303 - (110VAC)37581 - (220VAC)

Specify Light Colour= Red

G = GreenW = WhiteA = AmberB = Blue (DC only)

MaintainedON/OFF

1 3429234293

Momentary non-interlocking

2343083430934310

Dual pole momentary with

mechanical interlock

43432134322

Momentary single-speed

with mechanical interlock

2 3429434295

Momentary single button

1 3430534306

2343073711437199

✱ For use in6, 8, 10 and12 buttonenclosures

34292 34293

ON(Green)

OFF(Red)

ON(Green)

OFF(Red)

34308 34309 34310

34321 34322

34294 34295

34306

34307

37114

3719934305

Momentary 3 speed withmechanical & electrical

interlock

4 34323

✱✱ For reference only, quantity may vary depending on wiring method used.

SWITCHES

Operation Appearance Wires✱✱ Part number(s) Contact arrangement

2 positionkey switch

13711237115

2371163711737118

3 position key switch

2371193712037121

Variableposition resistor

2

34314B - (1K)34314D - (2K)34314 - (5K)

34314C - (10K)

Blank plate

0 34304 Blind rubber gasket with metal plate

37115 37116

37117 37118

37112

37119 37120

37121

Momentary 2 speed withmechanical

interlock

3342963429734298

34297

34298 – Same as 34297 but with delayed opening of contacts 7 & 8“Break- Before - Make” Contact Arrangement

34296

Maintained multi-position

selector switch (2 position and

3 position)

1 3710737108

2

343173431834319343203710937110

34317 34318 34319 34320

37107 37108 37109 37110

Push lock twist-releasemushroom

switch

13431337122

2371233712437125

34313 37123

37124

37125

37122

✱✱ For reference only, quantity may vary depending on wiring method used.

SWITCHES

Pendant cables:

Supplied with two

outer steel support

wires as required

by crane code

AS1418.1.

Pre-assembled festoon systems:

Choose a Conductix C-track, square track or beam festoon system and have

it completely pre-assembled and pre-wired with a pushbutton pendant.

Radio remote controls:

For the wireless control of

electrical equipment.

RELATED PRODUCTS

VICTORIA Head Office14 England Street, Dandenong, Victoria 3175, AustraliaTel: 61 3 9706 8844 Fax: 61 3 9794 9298 Email: info@conductix.com.au

NEW SOUTH WALES

4 / 77 Newton Road, Wetherill Park,New South Wales 2164, AustraliaTel: 61 2 9604 9800 Fax: 61 2 9604 9844 Email: info@conductix.com.au

QUEENSLAND

52 Lysaght Street, PO Box 6211, Acacia Ridge, Queensland 4110, Aust.Tel: 61 7 3219 6911 Fax: 61 7 3344 5377 Email: info@conductix.com.au

WESTERN AUSTRALIA

592 Albany Highway, Victoria Park,Western Australia 6100, AustraliaTel: 61 8 9355 2077 Fax: 61 8 9355 2088Email: info@conductix.com.au

TELFORD 1417