rail car pressure gauges -...

by D

B A

G /

Web

er

Rail Car Pressure Gauges

ARMATURENBAU GmbH

MANOTHERM Beierfeld GmbH

Q

DIN ISO

2 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH

Since many years we deliver pressure gauges in various confi gurations to operators, manufacturers and suppliers of

Rail cars of domestic and foreign rail car companiesUndergroundsTramways Locomotives for surface miningQuayside railways

and others.

MANOTHERM Beierfeld GmbH was founded as subsidi-ary company of ARMATURENBAU GmbH in 1991.The company was based on the former Messgerätewerk Beierfeld which passed into private hands. Since a coup-le of decades already almost all pressure gauges for the former ˝Deutsche Reichsbahn˝ were manufactured at our Beierfeld location.The range of these products was permanently improved and extended for the international market.

MANOTHERM Beierfeld GmbH is accredited Q1-Sup-plier of the Deutsche Bundesbahn AG (German Federal Railways). This means a high quality standard of the pro-duction, and of the delivered pressure gauges.

The ARMATURENBAU GmbH as well as theMANOTHERM Beierfeld GmbH are certifi ed according to DIN EN ISO 9001 since many years.

Further more, MANOTHERM Beierfeld GmbH has got the required GOST model and customs approvals for the export to Russia, the Ukraine, and Kazakhstan.

Our Experience - Your Advantage

Quality as Our Highest Aim

by D

B A

G /

Jazb

ec

by D

B A

G /

Web

er

,


As the result of our long-time experience with our customer's various demands on pressure gauge fea-tures we developed a new series:

the standardized

Combi Gauge,

manufactured in series with

direct lighting and

indirect lighting.

One and the same standard pressure gauge can be ap-plied for both methods of lighting. This can help you to save storage expenses!

On top of that, our Combi Gauges show the following advantages:

United front appearance (now for all available case diameters!)

Numerous variations / options

Minimized front-to-back sizes and reduced weights

Reliable pressure measurement

Comfortable reading

Long service life

One Solution for All Rail Cars

by D

B A

G /

Web

er

by D

B A

G /

Spi

elho

fen

BAs

•

• BAs

IP

Blow-outSEN

The Case - Handy and Secure


The Lighting

Our Combi Gauges have a case with black anodized crimped-on ring.

The equal appearance of the pressure gauge front side makes a good impression at every driver's compart-ment.

The instruments are protected against ingress of humidi-ty in front of the panel (IP 54).

All our Combi Gauges are provided with a U-clamp for panel mounting by default.

Due to the blow-out device in the case back, all our Com-bi Gauges comply with the safety pattern S1 according to EN 837-1.

Indirect Lighting

The pressure gauges can be illuminated by the driver's compartment lighting through lighting apertures in the case, without any separate electrical power supply.

Direct Lighting

A light bulb BA7s (24 V DC, 3 W) is provided for direct lighting.A light guide ring distributes the light optimized across pointer and dial.One single light bulb is suffi cient for the complete lighting of the whole gauge in all nominal case sizes (NCS)!

Optionally available for NCS 80 (3") and 100 (4"):

• LED lighting for operating voltages of more than 24 V DC up to max. 110 V DC

• Light bulb BA9s (24 V DC, 2 W)

by D

B A

G /

Web

er

Variety for Individual Demands

Rail Car Specialties


Our Combi Gauges combine by default many features that are required for the applications at very different kinds of rail cars.

Nevertheless, there are still many options and versions available to ensure that you receive exactly the suitable pressure gauge for your demands:

Different kinds of process connections

Special coloured design of the dial and scale

Individual, coloured dial inscriptions matching the application purpose

Coloured pointer design

Calibration for special fi tting positions

Other pressure units

and others more.

A good standard helps to simplify things and to make them straightforward – and saves expenses.But still it should always be possible to meet the individu-al and varied requirements even for very special applica-tions and demands.

You need a very special type of pressure gauge for rail cars?

We manufacture for you the pressure gauges as desired. On pages 10 and 11 you will fi nd some examples of pres-sure gauge versions that we manufacture additionally to our Combi Gauges on customer's requests.

Ask us, if you need a special pressure gauge version!

by D

B A

G /

Jazb

ec

EN


The SelectionThe selection criteria for Bourdon tube pressure gauges are described in EN 837-2.

Combi Gauges are available in two basic versions:

with one Bourdon tube

as duplex pressure gauge with two Bourdon tubes

Single Bourdon tube gauges are applied e. g.for separate compressed air pressure measurement of a brake cylinder or at the temporal reservoir of pneumatic brake systems.

You can fi nd a detailed description in our data sheet 1901.

Duplex pressure gauges serve for reading two sepa-rate pressures at the same time, e.g. the pressures at the brake cylinders of two bogies or of the main air reser-voir pipe and the main brake pipe of a pneumatic brake system.

The pressure gauges are provided with two indepen-dently working measuring systems. A special duplex movement with two pointer arbors transfers the pressure caused motion of the Bourdon tubes to the pointers. The pressure connections are marked with a coloured spot, equal to the pointer colour.

You can fi nd a detailed description in our data sheet 5901.

by D

B A

G /

Web

er

DINEN

60, 63 80, 100

0- 1,6 — 0,05 0,05

0- 2,5 0- 2,5 0,1 0,05

0- 4 0- 4 0,2 0,1

0- 6 0- 6 0,2 0,1

0-10 0-10 0,2 0,2

0-12 0-12 0,2 0,2

0-16 0-16 0,2 0,2

EN

-40 °C +70 °C -40 °C +60 °C +60 °C

(90° ± 5°)

Standard Pressure Ranges in bar (complying with DIN 38030/EN 837-1)

SinglePressure Gauge

Duplex Pressure Gauge

Subdivision

NCS 60, 63(2½")

NCS 80, 100(3", 4")

0- 1,6 — 0.05 0.05

0- 2,5 0- 2,5 0.1 0.05

0- 4 0- 4 0.2 0.1

0- 6 0- 6 0.2 0.1

0-10 0-10 0.2 0.2

0-12 0-12 0.2 0.2

0-16 0-16 0.2 0.2

Pressure Limitations (EN 837-2)

At static pressure: 75%

At cyclic pressure: 65%

of full scale value

Overpressure: max. full scale value

Temperature LimitationsStorage/transport: -40 to +70 °C (-40 to +158°F)Operation: Ambient -40 to +60 °C (-40 to +140 °F) Medium max. +60 °C (+140 °F)

DialBlack, white scale, with zero stop (stop pin)

Options: Different colours Coloured markings Coloured inscriptions Luminesce scale

PointerAluminum, colour selectable: red, white, yellow

Fitting PositionStandard is vertical (90° ± 5°)

Special Versionse. g. for load changes up to 1.000.000or special versions according to your demands (drawing) can be manufactured and deliverd within short time!

Technical Data in Common


by D

B A

G /

Jazb

ec

: Rg 60–1 Fz Chg 80–1 Fz RChg 100–1 Fz

Blow-outSEN

EN 837-1 60: 1,6 80, 100: 1,0

EN ISO 8434/1L Mx

LMx

BA7s,

Combi Gauge Models R...


Instruments for One Pressure Pipe

Models: Rg 60–1 Fz RChg 80–1 Fz RChg 100–1 Fz

CaseDiameter/nominal case sizes (NCS) 60, 80, 100,with black ring, crimped-on, (2.36", 3", 6")

blow-out in the back of the case,safety pattern S1 according to EN 837-1,U-clamp for panel mounting

WindowSingle strength glassAt option: glare-free and fail-safe safety glass window

Pressure Ranges0-1.6 to 0-16 bar

Accuracy Classes (EN 837-1)NCS 60 (2.36" ): 1.6NCS 80, 100 (3", 4"): 1.0

Process ConnectionBrass, center back,according to EN ISO 8434-1,NCS 60: L6 (M 12 x 1.5 with chuck cone, (2.36") including cutting ring and union nut)

NCS 80, 100: L10 (M 16 x 1.5 with chuck cone, (3", 4") including cutting ring and union nut)

LightingDirect by light bulb BA7s,indirect by lighting apertures in the case

Details and options: Data sheet 1901.

by D

B A

G /

Kle

e

Combi Gauge Models R...

DIN 38 030:2008

according to DIN 38 030:2008

Combi Gauge Models DR...

: DRg 60–1 Fz DRChg 80–1 Fz DRChg 100–1 Fz

Blow-outS1EN

0-2,5 0-16

(EN 837-1)HP 60 : 1,6HP 80, 100: 1,0

EN ISO 8434-1,HP 60 : 2x L6 (M 12 x 1,5 )HP 80, 100: 2x L10 (M 16 x 1,5 )

BA7s,


Instruments for Two Pressure Pipes

Models: DRg 60–1 Fz DRChg 80–1 Fz DRChg 100–1 Fz

CaseDiameter/nominal case sizes (NCS) 60, 80, 100,with black ring, crimped-on, (2.36", 3", 6")

blow-out in the back of the case,safety pattern S1 according to EN 837-1,U-clamp for panel mounting

WindowSingle strength glassAt option: glare-free and fail-safe safety glass window

Pressure Ranges0-2.5 to 0-16 bar

Accuracy Classes (EN 837-1)NCS 60 (2.36"): 1.6NCS 80, 100 (3", 4"): 1.0

Process ConnectionsBrass, center back parallel one above the other,according to EN ISO 8434-1,NCS 60: 2x L6 (M 12 x 1.5 with chuck cone, (2.36", 2½") including cutting ring and union nut)

NCS 80, 100: 2x L10 (M 16 x 1.5 with chuck cone, (3", 4") including cutting ring and union nut)

LightingDirect by light bulb BA7s,indirect by lighting apertures in the case

Details and options: Data sheet 5901.

by D

B A

G /

Web

er

Combi Gauge Models DR...

DIN 38 030:2008

according to DIN 38 030:2008

RB, RCh, RChg, RK

0-6 , 0-10 , 0-12 0-16 M 20 x 1,5,

Rail Car Gauges Specialties


DIN 6697 Pm 160–2 DIN 6697

RChgG 63–1 rmFr, 0-1,4-4

0-1,4 240°,

2,5 , , ,

For Tank Wagons

For Various Applications

For the pressure monitoring at tank wagons for dustlike goods we manufacture:

e. g. Diaphragm pressure gauges with connection according to DIN 6697 ("coal dust fl ange")

Model: Pm 160–2 DIN 6697 Details: Data sheet 3110

e. g. Bourdon tube pressure gauges with crimped-on ring stainless steel

Model RChgG 63–1 rmFr, 0-1.4-4 bar in special version

With front fl ange for panel mounting

Expanded scale 0-1,4 bar over 240°,

red mark at 2.5 bar,

special calibration for differing pressure rates: at test operation (1 bar), at transport (0.5 bar), at unloading (2.5 bar)

Details upon request

Besides our optimized Combi Gauges for pressu-re measurement at pneumatic brake systems, we supply pressure gauge versions for any applica-tions, e. g for replacement requirements.

Here you fi nd just a few examples from our large choice:

Bourdon tube pressure gauges with standard cases black or stainless steel

Models e. g. RB, RCh, RChg, RK

With rear mounting fl ange for wall mounting or U-clamp for panel mounting

Case: Nominal sizes 63, 80, 100, 160, (2½", 3", 4", 6") alloy steel, stainless steel, or polyamide 6B

Pressure ranges: Selectable, typically: 0-6 bar, 0-10 bar, 0-12 bar, and 0-16 bar

Connection: e. g. M 20x1.5 bottom brass

Details: Model overview 1000 and e.g. data sheets 1101, 1201, 1211, 1203, 1300

RChgG 63–3 rFr

G¼

Rail Car Gauges Specialties


RÜ 130–1 rBFr

DRÜ 130-1 rBFr

L 10 (M 16 x 1,5 ) BA9s

Single Bourdon tube gauges andDuplex Bourdon tube gauges

Models RÜ 130–1 rBFr DRÜ 130-1 rBFr

U-clamp for panel mounting

Case: Diameter (NCS) 130 (5") with black bezel ring

Pressure range: Selectable, typically: 0-12 bar

Dial Aluminum black

Scale: White, inscription as ordered

Connection: e. g. L 10 (M 16 x 1,5 with chuck cone, including cutting ring and union nut)

Lighting: Indirect (lighting apertures in the case), direct (light bulb BA9s 24V/2W)

Details: Upon request

RB, RChg, RCh, RK

G ½ B

7/16"-20 UNF DIN 3866 63, 80, 100, 160 -1/+15 , -1/+24 , -1/+30 T01-000-015 /

Bourdon tube pressure gauge with crimped-on ring stainless steel

Model RChgG 63–3 rFrWith front fl ange for panel mountingTightness tested with helium leak detection

Case: Stainless steel Case fi lling: Glycerine 86.5% Pressure range: 0-16 bar et. al. Connection: G ¼ B (¼" BSP) lower back connection stainless steel Details: Data sheet 1212

Bourdon tube pressure gauges, various casesModels e.g. RB, RChg, RCh, RK

With front mounting fl ange or U-clamp

Combined scale pressure/temperature for refrigerants

Connection brass or stainless steel G ½ B (½" BSP) or others, e. g. 7/16"-20 UNF acc. to DIN 3866

Case: Nominal sizes 63, 80, 100, 160, (2½", 3", 4", 6") alloy steel, stainless steel, or polyamide 6B

Pressure ranges: -1/+15 bar, -1/+24 bar, -1/+30 bar and others

Dial: Aluminum white

Scale: Black for pressure, coloured for refrigerant

Details: T01-000-015 / catalogue rubric 1

For Magnetic Brakes

For Air Conditioners

Special Sizes

ARMATURENBAU GmbHManometerstraße 5

D – 46487 Wesel–GinderichTel.: +49 (0) 28 03 / 91 30 – 0

Fax: +49 (0) 28 03 / 10 35 [email protected]

http://armaturenbau.dehttp://armaturenbau.com

Am Gewerbepark 9D – 08344 Grünhain-Beierfeld Tel.: +49 (0) 37 74 / 58 – 0Fax: +49 (0) 37 74 / 58 – [email protected]

http://manotherm.dehttp://manotherm.com

Subsidary Company and Sales East Germany and Eastern Europe

MANOTHERM Beierfeld GmbH

The Experts for Pressure and Temperature Measurement

AwB 33 6/06

Cop

yrig

ht fo

r al

l pic

ture

s of

rai

l car

s, d

river

‘s c

ompa

rtm

ents

, and

for

the

cove

r ba

ckgr

ound

pic

ture

: Die

Deu

tsch

e B

ahn

AG

and

the

phot

ogra

pher

rail car pressure gauges -...

Documents