rail signalling and power product and services catalogue
TRANSCRIPT
RSP Rail | 01752 969321 | [email protected]
Product and Services Cataloguewww.rsprail.co.uk | 01752 969321
Rail Signalling and Power
2 RSP Rail | 01752 969321 | [email protected]
Introduction to RSPRail Signalling & Power; More than just a leading UK supplier of Signalling and Power products
About RSPRSP has an experienced workforce focussed on delivering high quality design, manufacturing and test of electrical and electronic housings to the UK Rail industry.
The company is a member of the Hampden Group, a leading provider of specialist insurance, investment and financial support services.
Our TeamWe have a team of IRSE licenced signalling engineers and mechanical engineers with a wealth of knowledge and experience on both mainline and mass transit projects – across overseas and UK markets. Our specialised services cover Signalling and E&P works from concept design, detailed wiring design all the way to entry into service and project handback.
The multi-skilled teams of installation and testing engineers are co-located with our designers to offer an holistic and innovative solution in the most efficient way possible.
Our Senior Team have over 100 years combined experience delivering some of the world’s most complex projects.
Get in touch today Call: 01752 969321 Visit: www.rsprail.co.uk
3 RSP Rail | 01752 969321 | [email protected]
Table of ContentClick a page to jump straight to it
Power: Functional Supply Points (FSP) 23
FSP Range Overview 24
Power Product Selector 25
FSP01/02 Switchgear 26
FSP03 Switchgear 37
FSP04 Switchgear 56
TC04 Terminal Chambers 77
Principal / Auxiliary Supply Points (PSP/ASP) 114
Domestic Network Operator Cubicles (DNO) 116
Points Heating Control Cubicles (PHCC) 118
Level Crossing Lighting Control (LCU/LCC) 120
Rail: Services 5
Plug Couplers 8
Component Boards 10
Magshields 15
Signalling: Signalling Location Cases 18
Relocatable Equipment Buildings (REB) 19
Equipment Racks 20
Signal Aspect Flashing Relays (SAFR) 21
5 RSP Rail | 01752 969321 | [email protected]
RSP Services – Design
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Rail
OverviewRail Signalling & Power have a team of IRSE licensed signalling and mechanical engineers with a wealth of knowledge and experience. Our specialised services cover those activities undertaken in Signalling and Electrification & Plant work packages from GRIP 3 through to GRIP 8. We are also experienced in undertaking CRE and CEM roles as required. Our engineering design services are delivered from our modern UK design office. We have proven experience across a range of safety-critical sectors and clients. Our engineering designers are focussed on providing a service to deliver an innovative design solution, to both electrical and mechanical engineering problems and work in accordance with CDM regulations and ISO 9001.
RSP can design the following equipment: � GRIP 3-8
� E&P Design Works
� Stage Works & Enabling Designs
� Design Modifications
� Correlation Updates
� Final Record Updates & Returnds to NRG
� Product Development
� Power/Volt Drop & Heating Calculations
� 2D Microstation
� 3D Solidworks
6 RSP Rail | 01752 969321 | [email protected]
RSP Services – Build
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Rail
OverviewRail Signalling & Power are manufacturers of equipment housings for both Signalling and E&P solutions. From simple Trackside Connection Boxes (TCB) to full size Relocatable Equipment Buildings (REB) or Principal Supply Points (PSP), RSP have the knowledge and capabilities. Working from our factory in Saltash, Cornwall, we can design, manufacture and test complete housing solutions offering our clients and its project the increased safety of off site manufacturing.
RSP can build the following equipment: � Functional Supply Points (FSP)
� Relocatable Equipment Building (REB)
� DNO Cubicles (DNO)
� Signalling Location Case (LOC)
� Auxiliary Supply Points (ASP)
� Points Heating Control Cubicle (PHCC)
� Signal Aspect Flashing Relay (SAFR)
� Principal Supply Points (PSP)
� Trackside Disconnection Box (TCB)
� Lighting Control Cubicles (LCC)
7 RSP Rail | 01752 969321 | [email protected]
RSP Services – Supply
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Rail
OverviewRail Signalling & Power are specialist in Rail Cat numbers and PADS approved products. If you are looking for a supplier of Network Rail approved products and components then look no further than RSP. We are an entrusted supplier of materials into the rail industry with a proven track record in helping to source and supply to keep to project and clients timescales. Serving the rail infrastructure contractors and Network Rail itself, RSP offer a dedicated project support network or just a simple product supply depending on the requirements of the project.
RSP can supply the following equipment: � Rail Cat. No’s
� NR PADS Approved Products
� Signalling
� Power
� Telecoms
� Electrical
� Mechanical
� Fixings
� 2BA Covers
� SIN119
� Plug & Play
� Cable
8 RSP Rail | 01752 969321 | [email protected]
A full range of Network Rail Product Accepted pre-wired, fully assembled and tested plugs and recaptacles aka “Plug Couplers”
Key Features: � Reduced installation time, improved reliability and improved project safety.
� Assembled using only Network Rail accepted signalling wire.
� All plug couplers conform to military specification MIL-DTL-5015
� All plug couplers come with a free ends available in a range of standard lengths; 0.3m, 0.5m, 1.0m, 1.5m, 2.0m
� Available in Front or Rear Panel mounting depending on application
� Can be supplied as a standalone product or speak to us about designing plug couplers into a fully integrated project delivery solution.
Wired Plugs and Receptacles
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Rail
9 RSP Rail | 01752 969321 | [email protected]
Wired Plugs and Receptacles
Cable Receptacles General Use MCB-OD Signal &
Indicators TPWS IBCL & HyDrive
Point Operating Equipment
Train Detection
Lineside Cabling
Lineside AzLM
& Quad Cabling
Black BS6231 Type CK 2.5mm²
MIL5015 Receptacle (F) to Free End
MIL5015 Receptacle (M) to Free End
White DEF STAN 61-12 Pt6 Type 3 0.75mm²
MIL5015 Receptacle (F) to Free End
MIL5015 Receptacle (M) to Free End
3 Wire Bl/Wh/Scr Type A4
MIL5015 Receptacle (F) to Free End
A4 2 core + screen MIL5015 Receptacle (F) to Free End
Blue & Yellow 4 Wire DEF STAN 61-12 Pt6 Type 3
1.0mm²
MIL5015 Receptacle (F) to Free End
Blue & Yellow DEF STAN 61/12 Pt6 Type 3
1.0mm²
MIL5015 Receptacle (F) to Free End
Rail
10 RSP Rail | 01752 969321 | [email protected]
Component Boards
A comprehensive range of pre-assembled and factory tested component boards.
Key Features: � Easy to install and sized to fit in a standard single (or double where stated) size
BR930 series relay slot.
� Robust construction with board made from either Stainless Steel or Paxolin.
� Featuring 400V rated Weidmüller 2.5mm² screw terminal blocks.
Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need. Choose from our existing product selection or contact us to have a bespoke item made.
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Rail
11 RSP Rail | 01752 969321 | [email protected]
Component Boards
Rail
Application Description Components Part No.
Point
Single Point End 2 x 1kΩ 10W DLS20021
Single Point End 2 x 1.5kΩ 10W DLS20252
Double Point End 4 x 1kΩ 10W DLS20023
Clamp Lock 2 x 2.2kΩ 10W DLS20104
Signal
Double Flashing Aspect Signal 2 x 680Ω 10W DLS20022
Double Fibre Optic Banner Signal 2 x 47Ω 50W DLS20026
Position Light Signal 4 x 2.2Ω 10W DLS20101
ECRO 1 x 1.2Ω 2.5W DLS20106
Fibre Optic Banner Signal 1 x 4.7Ω 50W DLS20107
TPWS1 Resistor 1 x 3.9kΩ 25W DLS20032
2 Resistor 2 x 3.9kΩ 25W DLS20076
AWS 2 x 5.6Ω 25W DLS20142
Level Crossing Audible Warning Volume Limiter (Double Width) 6 x 680Ω 2.5W 6 x 1kΩ 2.5W DLS20165
General
1 Resistor 0.25W 1 x 20kΩ 0.25W DLS20280
1 Resistor 0.4W 1 x 15Ω 0.4W DLS20279
1 Resistor 2.5W 1 x 10kΩ 2.5W DLS20082
1 Resistor 4W 1 x 15Ω 4W DLS20281
1 Resistor 5W 1 x 1.2Ω 5W DLS20257
1 Resistor 25W 1 x 33Ω 25W DLS20033
1 Resistor 25W 1 x 10kΩ 25W DLS20267
1 Resistor 50W 1 x 300Ω 50W DLS20297
2 Resistor 2.5W 2 x 10kΩ 2.5W DLS20030
2 Resistor (10W) 1 x 10kΩ 10W 1 x 2.2Ω 10W DLS20171
2 Resistor 360 (50W) 3 x 360Ω 50W DLS20164
2 Resistor 470 (50W) 2 x 470Ω 50W DLS20037
3 Resistor (10W) 2 x 1kΩ 10W 1 x 2.2Ω 10W DLS20170
4 Resistor 2.5W 4 x 10kΩ 2.5W DLS20031
Resistor Plate Range
12 RSP Rail | 01752 969321 | [email protected]
Component Boards
Rail
Application Description Components Part No.
General
1 Diode 400V 1 x IN5404 400V 3A DLS20039
4 Diode 400V 4 x IN5404 400V 3A DLS20100
4 Diode 50V 4 x IN4001 50V 3A DLS20179
Diode Plate Range
13 RSP Rail | 01752 969321 | [email protected]
Component Boards
Rail
Application Description Components Part No.
HO Board
1 Capacitor, 1 Resistor1 x 470µF 100V 1 x 330Ω 25W
DLS20131
1 Capacitor, 1 Resistor1 x 3300µF 11V 1 x 330Ω 25W
DLS20132
1 Capacitor, 1 Resistor1 x 2200µF 100V 1 x 6.8Ω 25W
DLS20136
2 Capacitors, 2 Resistors2 x 470µF 100V 2 x 330Ω 25W
DLS20172
1 Capacitor, 1 Resistor1 x 470µF 100V 1 x 150Ω 25W
DLS20174
1 Capacitor, 1 Resistor1 x 2200µF 100V 1 x 150Ω 25W
DLS20176
1 Capacitor, 1 Resistor1 x 1000µF 100V 1 x 150Ω 25W
DLS20193
1 Capacitor, 1 Resistor1 x 4700µF 63V 1 x 100Ω 20W
DLS20294
1 Capacitor, 1 Resistor1 x 1000µF 50V 1 x 270Ω 10W
DLS20295
1 Capacitor, 1 Resistor1 x 1000µF 50V 1 x 100Ω 20W
DLS20296
HO Board - Double Width
2 Capacitors, 2 Resistors2 x 2200µF 100V 2 x 6.8Ω 25W
DLS20173
2 Capacitors, 2 Resistors1 x 470µF 100V 1 x 1000µF 100V 2 x 150Ω 25W
DLS20175
JO Board J/O Board 11V2 x IN5404 400V 3A 2 x 100Ω 2.5W
DLS20133
HOJ Board 1 Capacitor, 1 Diode, 1 Resistor1 x 470µF 100V 1 x 330Ω 15W 1 x IN4004 400V 1A
DLS20065
HOJ Board - Double Width 2 Capacitors, 2 Diodes, 2 Resistors2 x 6800µF 63V 2 x 36Ω 2W 2 x IN4004 400V 1A
DLA20231
Capacitor / Resistor /Diode (HO / JO / HOJ) Plate Range
14 RSP Rail | 01752 969321 | [email protected]
Component Boards
Rail
Application Description Components Part No.
ATP TrF Board6VA Transformer (CPA10047)
1 x 15Ω 5WDLS20167
Dummy Load Plate Range
15 RSP Rail | 01752 969321 | [email protected]
A range of covers providing additional barrier protection from live terminals in accordance with NR/L2/SIG/11201 - Mod B3
Key Features: � Quick and easy installation - average install time of 16 seconds.
� Simple, safe non-intrusive barrier.
� No special tools or equipment needed - only a standard 2BA nut runner required.
� Complete with 4mm test point holes to enable measurement and testing with covers in place.
� Fully compatible with terminals requiring red dome nuts.
Magshields
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Rail
16 RSP Rail | 01752 969321 | [email protected]
Magshield Product Range
Rail
Product Part No. Railway Cat No.
6-way 2BA 6 Terminal Block Cover DMS2BA06 0086/043943
4-way 2BA 6 Terminal Block Cover DMS2BA04 0086/043944
2-way 2BA 6 Terminal Block Cover DMS2BA02 0086/043945
1-way 2BA 6 Terminal Block Cover DMS2BA01 0086/043946
BS714 Cartridge Fuse Holder Cover DMS2BAF1 0086/043947
Pack of 10 Red Dome Nuts for use with 2BA covers CFR00033 0086/043948
Pack of 20 Red Dome Nuts for use with 2BA covers CFR00034 0086/043949
Pack of 30 Red Dome Nuts for use with 2BA covers CFR00035 0086/043950
Magshield Range:
18 RSP Rail | 01752 969321 | [email protected]
A full range of Network Rail Product Accepted full and half width location cases suitable for signalling, telecoms and power applications.
Key Features: � Built to either your own design or allow us to produce detailed design using
our unique RSP standardised approach to provide; greater consistency, improved lead times and cost savings.
� Galvanised mild steel, stainless, steel and GRP options.
� Configured to suit relay and computer based interlocking equipment or to deliver a full Digital Railway ready solution.
� All cases can be supplied full 3A tested in the factory and we can provide the option of accommodating Factory Functional testing.
� Full width case Dimensions; W=1022mm x H=1861mm x D=558mm. Max Weight = 400Kg.
� Half Width Case Dimensions; W=588mm x H = 1861mm x D=558mm. Max Weight = 200Kg.
Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.
Location Cases
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Signallng
19 RSP Rail | 01752 969321 | [email protected]
Available in standard Network Rail sizes from type 1 to 9 or made to your bespoke dimensions. RSP can offer an REB to meet your needs from dedicated Signalling rooms to combined rooms or split purpose buildings.
Key Features: � Built to either your own design or allow us to produce detailed design using
our unique RSP standardised approach to provide; greater consistency, improved lead times and cost savings.
� Available in a range of RAL colours including standard Green and Grey railway options.
� Configured to suit relay and computer based interlocking equipment or to deliver a full Digital Railway ready solution.
� Full range of options available including: additional internal walls, removable side walls, floor re-enforcement, bespoke lighting arrangements, forced air ventilation or air conditioning as required, intruder and fire alarms.
� All REBs can be supplied full 3A and / or BS EN61439 tested in the factory and we can provide the option of accommodating Factory Functional testing.
Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.
Relocatable Equipment Building
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Signallng
20 RSP Rail | 01752 969321 | [email protected]
Whether free standing or wall/floor mounted RSP are experts in providing equipment racks for installation in existing buildings and housings of all shapes and sizes. We can provide support from initial site surveys, 3D modelling, factory build and test all the way to assistance with on-site installation.
Key Features: � Built to either your own design or allow us to produce full 3d concept and
detailed wiring designs using our unique RSP standardised approach to provide; greater consistency, improved lead times and cost savings.
� We can supply single racks or multiple plug coupled or free wired racks to suit.
� Configured for relay and computer based interlocking equipment or power and telecoms applications.
� We have experience in both Network Rail and London underground sites and have key knowledge to overcome the challenges of tight spaces, restricted access, listed structures and many other site issues.
� All racks can be supplied full 3A and / or BS EN61439 tested in the factory and we can provide the option of accommodating Factory Functional testing.
Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.
Equipment Racks
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Signallng
21 RSP Rail | 01752 969321 | [email protected]
The only Network Rail Accepted Product to replace the old Flashing Aspect Control Unit (FACU).
Key Features: � Railway Cat No. 086/009191.
� RSP Part No. DLL05246.
� Compliant to NR/SP/SIG/1007.
� Compatible with both incandescent and LED Signals.
� Quick and easy installation with base and unit designed and built to fit into standard BR930 relay slot.
� Adaptor plate available to allow quick and easy replacement of an old FACU module.
� Supplied fully certified and factory tested for improved reliability.
Signal Aspect Flashing Relay
Signallng
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
24 RSP Rail | 01752 969321 | [email protected]
OverviewA Functional Supply Point (FSP) is the equipment tasked with power distribution throughout the rail infrastructure. RSP’s range of products cover all installation requirements - from a legacy changeover of a single piece of switchgear to a full FSP equipment housing, offering multiple power supplies and auto reconfiguration facility.
RangeRSP produce a range of FSP products in both class I and class II for use in signalling power distribution systems as defined in NR/L2/ELP/27410. The range conforms to NR/L2/SIGELP/27409 Issue 2.
RSP’s FSP01/02 switchgear assemblies is suitable for single and dual end fed systems with manual reconfiguration. Available in both 240V and 650V configurations.
The FSP 03 can be installed within dual end fed, auto reconfiguration systems and can be installed with all approved ARS systems currently in the market place. Switching can be provided for 110V through to 650V installations, both ac and dc.
The FSP04 range is designed specifically for SIN119 solutions to replace legacy installations. Supporting this is the range of TC04 Terminal Chambers which can be used for cable termination to support the whole FSP range.
Functional Supply Point (FSP)Range Overview
In House Manufacture And TestingAll our products are built at our manufacturing facilities in Plymouth. Our manufacturing and test staff have a wealth of experience in this field and also hold IRSE licences appropriate to their role. This gives our clients peace of mind that we will deliver a high standard of workmanship and quality which is then verified by our in house testing team, who carry out full 3A testing of each product.
InnovationThe RSP range offers a number of unique advantages to the industry and our customers. We can install up to four 1500VA transformers or up to four 10A T/J’s within a single FSP. Alternatively we could provide an FSP that houses a 25Ah point battery system, inclusive of charger. Feeder cables up to 120mm² in both copper and aluminium can also be installed easily, using our sliding gland plates.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
Power
Contact us to order or get more infoCall us on 01752 969321Alternately you can fill out our online form
25 RSP Rail | 01752 969321 | [email protected]
FSP Type
Distribution Topology Architecture Configuration Installation
Single End Fed Dual End Fed Manual Auto New Legacy
FSP01
FSP02
FSP03
FSP04
Power Product SelectorUse the table below to find your ideal product
Power
26 RSP Rail | 01752 969321 | [email protected]
FSP01 and 02
Power
FSP Type 20DLLF2S20
FSP Type 21DLLF2S21
FSP Type 20DLLF2P20-02
FSP Type 21DLLF2P21-02
FSP Type 22DLLF2P22-02
Class I I II II II
Feeder Switches 2 2 2 2 2
Functional Supplies 2 3 2 3 3
Feeder Cable Size
(Cu or Al)16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm²
Type of Fuses BS88 BS88 IEC IEC IEC
Dimensions (mm)W=498
H=346
D=259
W=498
H=346
D=259
W=506
H=400
D=233
W=506
H=400
D=233
W=506
H=400
D=233
Weight 18Kg 18Kg 13.5Kg 13.5Kg 13.5Kg
Railway Cat No. 092/000296 092/000297 054/213902 054/213903 054/213904
Additional Comments Surge Arrestor Protection provided
Surge Arrestor Protection provided
Labelled for use in 240V systems.
• NetworkRailProductAcceptanceCertificatePA05/07055(ClassI)and PA05/07053(ClassII).• ComplianttoNR/L2/SIGELP27409Issue2.
• AllFSP01and02productscomefittedwithRSP’suniqueremovableand split-ableglandplates.
27 RSP Rail | 01752 969321 | [email protected]
FSP01/02 Switchgear Assembly - Type 20 Class 1
� Railway Cat No - 092/000296.
� RSP Part No. DLLF2S20.
� Class I Distribution Enclosure for 650V Signalling Systems.
� Surge Arrestor Protection provided.
� Robust stainless steel enclosure.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Two Switched and Fused Output Functional Supplies.
� Functional Supply Fuse Carriers BS88.
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=498mm x H=346mm x D=259mm.
� Weight = 18Kg.
FSP01/02 - Type 20 Class 1
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
28 RSP Rail | 01752 969321 | [email protected]
FSP01/02 - Type 20 Class 1
Power
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
T
B
f2 T
B
f3 T
B
f4 T
B
f5 T
B
f6T
B
f1
T1
T2
T3
T4
T5
T6
T7 T8 T10T9T11 T12 T13 T14
DIMENSIONINGFSP02 Type 20SS
WIRING DIAGRAM
INTERNAL VIEW
346
259
224
398
498
458
306
346 #3
B
T2 SUPPLY
NO
POINTTEST TEST
NC
CARRIERFUSEABBE91/32
CARRIERFUSEABBE91/32
CARRIERFUSEABBE91/32
CARRIERFUSEABBE91/32
CARRIERFUSEABBE91/32
CARRIER
L1-B
X650 B
N
L2-N
X650 B
K
L1-B
X650 B
N
L1-B
X650 B
N
L1-B
X650 B
N
L1 - BX650
L2 - NX650
FUSEABB
ISOLATORABB
OT80FT3
ISOLATOR
#1 #2
#3 #4
FUTURE ALARM
#4 #3 #4
ABBOT80FT3
E91/32
SUPPLYINCOMING
MAINSW1
SUPPLY 1CIRCUIT
FUNCTIONALSWA
SUPPLY 2CIRCUIT
FUNCTIONALSWB
SUPPLY 3CIRCUIT
FUNCTIONALSWC
SUPPLY
16mm COPPER BUSBAR
PS3/60/16
L1-B
X650 B
N
L1-B
X650 B
N
L1-B
X650 B
N
#3 #4 #3 #3#4 #4
SW1
OUTGOINGMAIN
ISOLATORABB
OT40FT3
ISOLATORABB
OT40FT3
ISOLATOR
L2-N
X650 B
K
L2-N
X650 B
K
L2-N
X650 B
K
L2-N
X650 B
K
L2-N
X650 B
K
L2-N
X650 B
K
#2
T
B
T
B
T
B
T
OT40FT3
C NCNO
T1 SUPPLY INDICATION
E
1
BELDON 9302
#1
L2-N
X650 B
K
L1-B
X650 B
N
#1 #2
#1 #2
TO
EARTH
STUD
SW2ABB
POINT
SWA SWB SWC
L N
C
SW2
BOTHORPERTM150/650ESP
TERMINALCHAMBER
TERMINALCHAMBER
29 RSP Rail | 01752 969321 | [email protected]
FSP01/02 - Type 21 Class 1
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
FSP01/02 Switchgear Assembly - Type 21 Class 1
� Railway Cat No. 092/000297.
� RSP Part No. DLLF2S21.
� Class I Distribution Enclosure for 650V Signalling Systems.
� Robust stainless steel enclosure.
� Surge Arrestor Protection provided.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Three Switched & Fused Output Functional Supplies.
� Functional Supply Fuse Carriers BS88.
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=498mm x H=346mm x D=259mm.
� Weight = 18Kg.
30 RSP Rail | 01752 969321 | [email protected]
FSP01/02 - Type 21 Class 1
4
51
2
3
6 4
51
2
3
6
3
4
51
2 6 4
51
2
3
6 4
51
2
3
6
T
B
T
B
T
B
T
B
T
B
T
B
f1
T1
T2
T3
T4
T5
T6
T7 T8 T10T9 T11 T12
WIRING DIAGRAM DIMENSIONINGFSP02 Type 21SS
INTERNAL VIEW
398
306
498
458
346
259
346
224
L2-N
X650 B
K
SWA
1
T1 SUPPLY
#4
FUNCTIONAL
T2 SUPPLY
#4 #3
SUPPLY 1CIRCUIT
TESTPOINT
E91/32ABBFUSECARRIER
E91/32ABBFUSECARRIER
E91/32ABBFUSECARRIER
E91/32ABBFUSECARRIER
E91/32
CARRIER
L1-B
X650 B
N
L1-B
X650 B
N
L1 - BX650
ABBFUSE
ABBFUSE
L2 - NX650
OT80FT3
ISOLATOR
#3 #4 #3
ABBISOLATOR
CARRIER
SUPPLYINCOMING
MAINSW1
SUPPLY 3
ISOLATOR
SW2
L2-N
X650 B
K
#4
ABBOT80FT3
B
SWBFUNCTIONAL
CIRCUITSUPPLY 2
SWC
SUPPLY
16mm COPPER BUSBAR
PS3/60/16
FUNCTIONALCIRCUIT
MAINOUTGOING
SW1OT40FT3
ABBISOLATOR
OT40FT3
ISOLATOR
L2-N
X650 B
K
L2-N
X650 B
K
T
B
T
B
T
B
T
B
TO
EARTH
STUD
ABB ABB
POINT
SWA SWB SWC
T3 SUPPLY
T
B
T
E91/32
#5 #5
L2-N
X650 B
K
L1-B
X650 B
N
#1 #2
L1-B
X650 B
N
#3 #4
L2-N
X650 B
K
L2-N
X650 B
K
L1-B
X650 B
N
#1 #2
#2#1 #1 #2
L1-B
X650 B
N
L1-B
X650 B
N
L1-B
X650 B
N
#3 #4 #3
SW2
OT40FT3
TEST
L2-N
X650 B
K
TERMINALCHAMBER
TERMINALCHAMBER
31 RSP Rail | 01752 969321 | [email protected]
FSP01/02 Switchgear Assembly - Type 20
� Railway Cat No. 054/213902.
� RSP Part No. DLLF2P20-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� Surge Arrestor Protection provided.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Two Switched and Fused Output Functional Supplies.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=400mm x D=233mm.
� Weight = 13.5Kg.
FSP01/02 - Type 20
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
32 RSP Rail | 01752 969321 | [email protected]
FSP01/02 - Type 20
Power
2
3
4
51
6
4
51
2
3
6 2
3
4
51
6 2
3
4
51
6
2
3
4
51
6
T6T5
T
B
T8T7
T
B
T
B
T
B
T
B
T3 T4T1 T2
T
B
T11T10 T12T9
NO
ABB40-660
L N
C NC PTSU
458
FSP02 TYPE 20
INDICATION
CARRIER
BELDON 9302
OUTGOINGFUNCTIONALCIRCUITSUPPLY 1
CIRCUIT
FUTURE ALARM
ISOLATOR
SUPPLY 2
FUNCTIONAL
TEST
ABB
NO NC
#1
ISOLATOR
POINTPOINT
INCOMING
TEST
ISOLATOR
SUPPLY 3
CARRIERFUSEABBE91/32
CARRIERFUSEABBE91/32
CARRIERFUSEABBE91/32
CARRIER
E91/32
CARRIER
L1-B
X6
50
BN
L2-N
X6
50
BK
L1-B
X6
50
BN
L1-B
X6
50
BN
L1-B
X6
50
BN
L1-B
X6
50
BN
L1 - BX650
L2 - NX650
#5 #5
FUSEABB
FUSEABB
#6 #6
FUSE
ABB ABB
MAX SIZE 120mm²
#1 #2
#3 #4 #3 #4 #3
OT80FT3
ABBE91/32
SWB
OT40FT3ABB
S
#2
INCOMING WIRES
OT80FT3
E91/32
SUPPLYINCOMING
MAINSW1
SUPPLY 1CIRCUIT
FUNCTIONALSWA
SUPPLY 2
SWC
SUPPLYCIRCUIT
FUNCTIONALOUTGOING
MAX SIZE 120mm²
L1-B
X6
50
BN
L1-B
X6
50
BN
L1-B
X6
50
BN
#3 #4 #3 #3
16mm COPPER BUSBAR
FUNCTIONALCIRCUIT
PS3/60/16
#4 #4
INCOMING WIRES
MAIN
POINTTESTSW1
POINTTESTSW2
ISOLATOR
OT40FT3
ISOLATOR
L2-N
X6
50
BK
L2-N
X6
50
BK
L2-N
X6
50
BK
L2-N
X6
50
BK
L2-N
X6
50
BK
L2-N
X6
50
BK
L2-N
X6
50
BK
#1 #2 #1 #2
B
T T
B
T
B
T
B
T
B
T
B
T
B
T
B
C
SW2
OT40FT3ABB
#4
TERMINALCHAMBER
TERMINALCHAMBER
DIMENSIONINGWIRING DIAGRAM
506
400
220 400
400
233
INTERNAL VIEW
33 RSP Rail | 01752 969321 | [email protected]
FSP01/02 Switchgear Assembly - Type 21
� Railway Cat No. 054/213903.
� RSP Part No. DLLF2P21-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Three Switched & Fused Output Functional Supplies .
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=400mm x D=233mm.
� Weight = 13.5Kg.
FSP01/02 - Type 21
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
34 RSP Rail | 01752 969321 | [email protected]
FSP01/02 - Type 21
4
51
2
3
6
4
51
2
3
6 4
51
2
3
6 4
51
2
3
6
4
51
2
3
6
T6T5
T
B
T8T7
T
B
T
B
T9
T
B
T
B
T10 T3 T4T1 T2
T
B
458
FSP02 Type 21WIRING DIAGRAM
INTERNAL VIEW
SWC
CIRCUIT
OUTGOINGFUNCTIONALCIRCUITSUPPLY 1
CIRCUITSUPPLY 2
FUNCTIONAL
SW2
FUNCTIONAL
SWB
TEST
SUPPLY 3
TESTPOINT
INCOMING
B
T T
B
T
B
T
B
T
B
T
B
T
B
T
B
T
B
T
POINT
SWA
POINT
TEST
B
SW1
POINT
SW1 SW2TEST
DIMENSIONING
TERMINALCHAMBER
TERMINALCHAMBER
233
400
506
220
400
400
35 RSP Rail | 01752 969321 | [email protected]
FSP01/02 Switchgear Assembly - Type 22
� Railway Cat No. 054/213904.
� RSP Part No. DLLF2P22-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� Labelled for use in 240V systems.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Three Switched & Fused Output Functional Supplies.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=400mm x D=233mm.
� Weight = 13.5Kg.
FSP01/02 - Type 22
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
36 RSP Rail | 01752 969321 | [email protected]
FSP01/02 - Type 22
2
3
4
51
6
2
3
4
51
6 2
3
4
51
6
3
4
51
2 6
2
3
4
51
6
T6T5
T
B
f2
T8T7
T
B
f3 T
B
f4
T9
T
B
f5 T
B
f6
T10 T3 T4T1 T2
T
B
f1
458
FSP02 TYPE 22 WIRING DIAGRAM DIMENSIONING
INTERNAL VIEW
T
SUPPLY
OUTGOINGFUNCTIONALCIRCUIT CIRCUIT
SUPPLY 2
FUNCTIONAL FUNCTIONALCIRCUIT
B
PS3/60/16
SUPPLY 3
TESTPOINT POINT
T
B
SUPPLY 3
ISOLATOR
TEST
INCOMING
E91/32ABBFUSECARRIER
E91/32ABBFUSECARRIER
E91/32ABBFUSECARRIER
E91/32ABBFUSECARRIER
E91/32
CARRIER
L1-B
X2
40
BN
N1
-NX
24
0 B
U
L1-B
X2
40
BN
L1-B
X2
40
BN
L1-B
X2
40
BN
L1-B
X2
40
BN
L1 - BX240
N1 - NX240
#5 #5
#6
ABBFUSE
ABBFUSE
#6
OT80FT3ABB ABB
MAX SIZE 120mm²
#1 #2 #3 #4 #3 #4 #3 #5 #1
ISOLATORISOLATOR
CARRIER
E91/32
OT80FT3
INCOMING WIRES
#2
SW1MAIN
INCOMINGSUPPLY
SWAFUNCTIONAL
CIRCUITSUPPLY 1
SWBFUNCTIONAL
CIRCUITSUPPLY 2
SWC
OUTGOING
16mm COPPER BUSBAR
FUNCTIONAL
ABB
MAX SIZE 120mm²
L1-B
X2
40
BN
L1-B
X2
40
BN
L1-B
X2
40
BN
#3 #4 #3 #3#4
B
CIRCUITMAIN
INCOMING WIRES
#4
SW1TEST
POINT
SW2TEST
POINT
OT40FT3ABB
ISOLATOR
OT40FT3
ISOLATOR
N1
-NX
24
0 B
U
N1
-NX
24
0 B
U
N1
-NX
24
0 B
U
N1
-NX
24
0 B
U
N1
-NX
24
0 B
U
N1
-NX
24
0 B
U
N1
-NX
24
0 B
U
#1 #2 #1 #2
B
T T
B
T
B
T
B
T
B
T
B
T
B
T
SW2
OT40FT3ABB
SUPPLY 1
TERMINALCHAMBER
TERMINALCHAMBER
400
220
506
400
233
400
37 RSP Rail | 01752 969321 | [email protected]
FSP03 Assemblies FSP03 PRODUCTS
FSP0
3Type 3
2D
LLF3P
32
-02
FSP0
3
Type 32
CD
LLF3P
32
C
FSP0
3
Type 30
DLLF3
P3
0-0
2
FSP0
3
Type 31
DLLF3
P3
1-0
2
FSP0
3Type 3
3D
LLF3P
33
-02
FSP0
3
Type 34
DLLF3
P3
4-0
2
FSP0
3
Type 35
DLLF3
P3
5-0
2
FSP0
3Type 3
6D
LLF3P
36
-02
FSP0
3Type 3
7D
LLF3P
37
-02
FSP0
3 Type 3
2Surge Suppressor M
oduleD
LLF3P
32
SM
Class II II II II II II II II II II
Feeder Switches2 – Mains3 - ARS
2 – Mains3 - ARS
2 – Mains3 - ARS
N/A N/A N/A N/A N/A N/A N/A
Functional Supplies
Dependant on functionalFSP03 Module selected
2 4 4 2 2 2 4 N/A
Feeder Cable Size (Cu or Al)
16-120mm² 16-120mm² 16-120mm² N/A N/A N/A N/A N/A N/A N/A
Type of Fuses IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC
Dimensions (mm)Full Width
CaseHalf Width
Case
W=506H=800D=233
W=506H=800D=228
W=506H=800D=228
W=506H=800D=228
W=506H=800D=228
W=506H=400D=233
W=506H=400D=228
W=100H=150D=99
Weight 18.75Kg 18.75Kg 18.75Kg 18.75Kg 18.75Kg 13.50Kg 13.50Kg 1Kg
Railway Cat No. 054/213905 054/213906 054/213907 054/213908 054/213909 054/213910 054/213911 054/213912 054/213913 054/213914
Additional Comments
Optional Heater and Light available
Optional Heater and Light available
Primary and Secondary
fuses
Primary and Secondary
fuses
Including termination
facility for one spur supply
A single surge suppressor in its
own housing
• NetworkRailProductAcceptanceCertificatePA05/07053.• ComplianttoNR/L2/SIG/ELP/27409Issue2.• AllFSP03scomefittedwithRSP’suniqueremovableandsplit-ableglandplates.
FSP03• AllFSP03casesarefullycompatiblewithallNWRProductAcceptedAutomatic ReconfigurationSystemsandcanbesuppliedinyellowbandedcasesmade frommildorstainlesssteel.
Power
38 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 30
� Railway Cat No. 054/213907.
� RSP Part No. DLLF3P30-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� FSP03 Main Distribution Module.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=800mm x D=233mm.
� Weight = 18.75Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 30
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
39 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 30
Power
2
3
4
51
6 2
3
4
51
6 2
3
4
51
6 2
3
4
51
6 2
3
4
51
6
2
3
4
51
6 2
3
4
51
6 B
E91/32ABBFUSE
T
CARRIER
f2
B
E91/32ABBFUSE
f1 T
CARRIER
T4T3T1 T2
458
FSP03 TYPE 30
233
800
WIRING DIAGRAM
INTERNAL VIEW
DIMENSIONING
220
180
400
800
506
220
BX
65
0 B
NL1
SUPPLY
POINTS
INCOMING
L2-N
X6
50
BK
L1-B
X6
50
BN
#1
AUTO
NX
65
0 B
KL2
NO.1RECON
TEST
#2
AUTORECONSUPPLY
RECONSUPPLYNO.2
#3
NX
65
0 B
K
SUPPLYNO.1
DISTRIBUTIONSUPPLY
#3
BYPASS
LOCAL
SUPPLY
POINTS
T7
T5 T6 T9
NO.2
TEST
POINTS
OUTGOING
L2-N
X6
50
BK
L1-B
X6
50
BN
#1 #2
T14
T10
SUPPLY
BYPASS
BK
#4
TEST
T12
L2N
X6
50
#3L1 BK
#4
BX
65
0B
N L2BN
#4#3
#5 #6 #5
NX
65
0
#3L1
BK
#4
BX
65
0
#6
L2N
X6
50
#3L1
BK
#4
BX
65
0B
N
L2BN
S12S11
NX
65
0
BX
65
0
POINTS
#4#3 #4#3
T8
T11L1
-BX
65
0 B
N
L1-B
X6
50
BN
L1-B
X6
50
BN
L1-B
X6
50
BN
#3
L2
L2-N
X6
50
BK
L2-N
X6
50
BK
L2-N
X6
50
BK
L1-B
X6
50
BN
L2-N
X6
50
BK
T13
TEST
L2-N
X6
50
BK
TESTPOINTS
L2N
X6
50
BK
L1B
X6
50
BN AUTO
L1
L1B
X6
50
BN
40 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 31
� Railway Cat - No. 054/213908.
� RSP Part - No. DLLF3P31-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� FSP03 Functional Supply Module with Primary and Secondary fuses.
Key Features: � Four Switched & Fused Output Functional Supplies.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=800mm x D=228mm.
� Weight = 18.75Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 31
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
41 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 31
Power
2
3
4
51
6 2
3
4
51
6 2
3
4
51
62
3
4
51
6
T1 T2
B
E91/32ABBFUSE
T
CARRIER
f2
B
E91/32ABBFUSE
f1 T
CARRIER
B
E91/32ABBFUSE
f3 T
CARRIER
B
E91/32ABBFUSE
f5 T
CARRIER
B
E91/32ABBFUSE
f7 T
CARRIER
B
E91/32ABBFUSE
f4 T
CARRIER
B
E91/32ABBFUSE
f6 T
CARRIER
B
E91/32ABBFUSE
f8 T
CARRIER
B
E91/32ABBFUSE
f9 T
CARRIER
B
E91/32ABBFUSE
f10 T
CARRIER
B
E91/32ABBFUSE
f11 T
CARRIER
B
E91/32ABBFUSE
f12 T
CARRIER
B
E91/32ABBFUSE
f13 T
CARRIER
B
E91/32ABBFUSE
f14 T
CARRIER
B
E91/32ABBFUSE
f15 T
CARRIER
B
E91/32ABBFUSE
f16 T
CARRIER
458
FSP03 Type 31
POINTS
T14
INCOMING
___ ___
T3 T4 T5 T6 T7 T8 T10T9L1
-BX
650 B
N
L2-N
X650 B
K
___
#2#1
#4#3 #4#3 #4#3 #4#3
#4#3 #4#3 #4#3 #4
TEST
SUPPLY 4
#3
FUNCTIONALSUPPLY 1
FUNCTIONALSUPPLY 2
FUNCTIONALSUPPLY 3
FUNCTIONALSUPPLY 4
FUNCTIONALSUPPLY 4
FUNCTIONALSUPPLY 3
FUNCTIONALSUPPLY 2
FUNCTIONALSUPPLY 1
POINTSTEST
FUNCTIONALSUPPLY 3
FUNCTIONALSUPPLY 2
POINTS
#3
FUNCTIONALSUPPLY 1
SW1FUNCTIONAL
SUPPLY 1
SW2FUNCTIONAL
SUPPLY 2
SW4
SUPPLY 3
T11 T12 T13
FUNCTIONAL
T15 T16 T17 T18
T19 T20 T21 T22 T23 T24 T25
FUNCTIONALSUPPLY 4
SW3FUNCTIONAL
T26
L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K
L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2
BN
NX
11
0B
K
L1 BK
BX
65
0
#3 L2
BN
NX
65
0
#4
L1 BK
BX
65
0
#3 L2 BN
NX
65
0
#4 L1 BK
BX
65
0
#3 L2 BN
NX
65
0
#4 L1 BK
BX
65
0
#3 L2 BN
NX
65
0
#4 L1 BK
#4
___
BX
65
0
#3 L2
BN
NX
65
0
___
L1 BK
BX
65
0
#3 L2 BN
NX
65
0
#4 L1 BK
BX
65
0
#3 L2 BN
NX
65
0
#4 L1 BK
BX
65
0
NX
65
0
#4
TEST
L2
TESTPOINTS
WIRING DIAGRAM DIMESNIONS
INTERNAL VIEW
400
506
220
180
800
220
228
800
42 RSP Rail | 01752 969321 | [email protected]
FSP03 Full Width Location Case Assembly
� Railway Cat No. 054/213905.
� RSP Part No. DLLF3P32-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� Full Width Case - Optional Heater and Light available.
When ordering a complete case a Type 30 Distribution Module is supplied as standard as well as one other FSP03 Functional Supply Module which is to be specified by the client.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=1022mm x H=1861mm x D=558mm.
� Weight = Dependant on final design. Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form
FSP03 - Type 32
Power
43 RSP Rail | 01752 969321 | [email protected]
FSP03 Half Width Location Case Assembly
� Railway Cat No. 054/213906.
� RSP Part No. DLLF3P32C.
� Class II Distribution Enclosure for 650V Signalling Systems.
� Half Width Case - Optional Heater and Light available.
When ordering a complete case a Type 30 Distribution Module is supplied as standard as well as one other FSP03 Functional Supply Module which is to be specified by the client.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=588mm x H=1861mm x D=558mm.
� Weight = Dependant on final design.
FSP03 - Type 32C
Power
Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form
44 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 33
� Railway Cat - No. 054/213909.
� RSP Part - No. DLLF3P33-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� FSP03 Functional Supply Module.
Key Features: � Four Switched & Fused Output Functional Supplies.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=800mm x D=228mm.
� Weight = 18.75Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 33
Power
Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form
45 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 33
Power
458
2
3
4
51
6 2
3
4
51
6 2
3
4
51
6
1
2
3
4
5
6
T1 T2 B
E91/32ABBFUSE
T
CARRIER
ABBFUSE
f1 T
B
E91/32
CARRIER
ABBFUSE
f3 T
B
E91/32
CARRIER
ABBFUSE
f5 T
B
E91/32
CARRIER
ABBFUSE
f7 T
B
E91/32
CARRIER
ABBFUSE
f4 T
B
E91/32
CARRIER
ABBFUSE
f6 T
B
E91/32
CARRIER
T
B
E91/32ABBFUSE
f8
CARRIER
FSP03 Type 33
228
800
DIMENSIONINGWIRING DIAGRAM
INTERNAL VIEW
220
506
400
220
180
800
POINTS
FUNCTIONAL
INCOMINGL1
-BX
65
0 B
N
L2-N
X650
BK
___
L1-B
X65
0 B
N
L2-N
X650
BK
___
L1-B
X65
0 B
N
L2-N
X650
BK
#3
L1-B
X65
0 B
N
L2-N
X650
BK
___
T3 T4 T5 T6 T7 T8 T10T9
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK___
#2#1 #4#3 #4#3 #4
FUNCTIONAL
#4#3
#4#3 #4#3 #4#3 #4
TESTPOINTS
TEST
#3
SUPPLY 4FUNCTIONAL
SUPPLY 2FUNCTIONAL
SUPPLY 3
POINTS
SUPPLY 4
SUPPLY 1
___
SW1FUNCTIONAL
SUPPLY 1
SW2FUNCTIONAL
SUPPLY 2
SW4FUNCTIONALFUNCTIONAL
SUPPLY 3
TEST
SW3
TESTPOINTS
46 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 34
� Railway Cat - No. 054/213910.
� RSP Part - No. DLLF3P34-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� FSP03 Functional Supply Module with Primary and Secondary fuses.
Key Features: � Two Switched and Fused Output Functional Supplies.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=800mm x D=228mm.
� Weight = 18.75Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 34
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
47 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 34
Power
2
3
4
51
6 2
3
4
51
6
T1 T2
B
E91/32ABBFUSE
T
CARRIER
B
E91/32ABBFUSE
f1 T
CARRIER
B
E91/32ABBFUSE
f3 T
CARRIER
B
E91/32ABBFUSE
f4 T
CARRIER
B
E91/32ABBFUSE
f5 T
CARRIER
B
E91/32ABBFUSE
f10 T
CARRIER
B
E91/32ABBFUSE
f11 T
CARRIER
B
E91/32ABBFUSE
f12 T
CARRIER
B
E91/32ABBFUSE
f6 T
CARRIER
B
E91/32ABBFUSE
f7 T
CARRIER
B
E91/32ABBFUSE
f8 T
CARRIER
B
E91/32ABBFUSE
f9 T
CARRIER
458
FSP03 TYPE 34
POINTSTEST
INCOMING
___
T3 T4 T5 T6
L1-B
X650 B
N
L2-N
X650 B
K
___
#2#1
#4#3 #4#3 #4#3 #4#3
#4#3 #4#3 #4#3 #4
TESTPOINTS
#3
FUNCTIONALSUPPLY 1
FUNCTIONALSUPPLY 2
FUNCTIONALSUPPLY 4
FUNCTIONALSUPPLY 3
FUNCTIONALSUPPLY 2
FUNCTIONALSUPPLY 1
FUNCTIONALSUPPLY 4
FUNCTIONALSUPPLY 3
FUNCTIONALSUPPLY 2
POINTS
#3
FUNCTIONALSUPPLY 1
SW1
SUPPLY 2
T10 T11 T12 T13 T14
T15 T16 T18 T19 T20
FUNCTIONALSUPPLY 1
SW2FUNCTIONAL
T21
L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K
L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2N
X11
0B
K L1B
X11
0B
N L2
BN
NX
11
0B
K
L1 BK
BX
65
0
#3 L2
BN
NX
65
0
#4
L1 BK
BX
65
0
#3 L2 BN
NX
65
0
#4 L1 BK
#4
BX
65
0
#3 L2
BN
NX
65
0
___
L1 BK
#4
T7 T8 T9
T17
BX
65
0
NX
65
0
T22
TEST
L2
TESTPOINTS
WIRING DIAGRAM DIMENSIONING
INTERNAL VIEW
180
220
506
400
220
800
800
228
48 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 35
� Railway Cat - No. 054/213911.
� RSP Part - No. DLLF3P35-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� FSP03 Functional Supply Module.
Key Features: � Two Switched and Fused Output Functional Supplies.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=800mm x D=228mm.
� Weight = 18.75Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 35
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
49 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 35
Power
1
2
3
4
5
6
1
2
3
4
5
6
T1 T2
T
B
E91/32ABBFUSECARRIER
ABBFUSE
f1 T
B
E91/32
CARRIER
T
B
E91/32ABBFUSE
f3
CARRIER
T
B
E91/32ABBFUSE
f4
CARRIER
458
FSP04 Type 35
#4
TEST
INCOMING
T3 T4 T5 T6
L1-B
X650 B
N
L2-N
X650 B
K
#2
NX
65
0
POINTS
#1
FUNCTIONALSUPPLY 2
BX
65
0
#3
FUNCTIONALSUPPLY 1
SW1FUNCTIONAL
SUPPLY 1
SW2
BN
FUNCTIONALSUPPLY 2
L1 BK
BX
65
0
#3 L2
BN
NX
65
0
#4
L1 BK
BX
65
0
#3 L2 BN
NX
65
0
#4 L1 BK
BX
65
0
#3 L2
BN
NX
65
0
#4
L1 BKL2
TESTPOINTS
WIRING DIAGRAM DIMENSIONING
INTERNAL VIEW
180
220
506
400
220
800
800
228
50 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 36
� Railway Cat - No. 054/213912.
� RSP Part - No. DLLF3P36-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� FSP03 Functional Supply Module including termination facility for one spur supply.
Key Features: � Two Switched and Fused Output Functional Supplies.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=400mm x D=233mm.
� Weight = 13.50Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 36
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
51 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 36
Power
458 4
51
2
3
6 4
51
2
3
6
T1 T2
ABBFUSE
T
B
E91/32
CARRIER
f2E91/32ABBFUSE
f1 T
B
CARRIER
E91/32ABBFUSE
f3 T
B
CARRIER
E91/32ABBFUSE
f4 T
B
CARRIER
FSP03 Type 36 DIMENSIONINGWIRING DIAGAM
INTERNAL VIEW
400
233
400
220
506
400
BX
65
0
BK
POINTSTEST
SPUR
INCOMING
___
T3 T4 T5 T6
L1-B
X6
50
BN
L2#3
L2-N
X6
50
BK
NX
65
0
NX
65
0
___
#3 L2
SUPPLY
#2
#4
TESTPOINTS
#1
SUPPLY 1
SW1
BN
FUNCTIONAL
SUPPLY 1
L1 BK
FUNCTIONAL
#3 L2
BN
BX
65
0
#4
L1 BK
#4
NX
65
0
#3 L2 BN
BX
65
0
L1
BK
#4
BN
BX
65
0
___
L1
NX
65
0
SW2
SPURSUPPLY
52 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 37
� Railway Cat No. 054/213913.
� RSP Part No. DLLF3P37-02.
� Class II Distribution Enclosure for 650V Signalling Systems.
� FSP03 Functional Supply Module.
Key Features: � Four Switched & Fused Output Functional Supplies.
� Easy cable installation with Magplate sliding split-able Gland Plate.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=506mm x H=400mm x D=228mm.
� Weight = 13.50Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 37
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
53 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 37
Power
458
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
T1 T2
T
B
E91/32ABBFUSECARRIER
f2
FUSE
f1 T
B
E91/32ABB
CARRIERFUSE
f3 T
B
E91/32ABB
CARRIERFUSE
f5 T
B
E91/32ABB
CARRIERFUSE
f7 T
B
E91/32ABB
CARRIERFUSE
f4 T
B
E91/32ABB
CARRIERFUSE
f6 T
B
E91/32ABB
CARRIERFUSE
f8 T
B
E91/32ABB
CARRIER
FSP03 Type 37
400
220
506
400
WIRING DIAGRAM DIMENSIONING
INTERNAL VIEW
POINTSTEST
INCOMING
L1-B
X65
0 B
N
L2-N
X650
BK
___
L1-B
X65
0 B
N
L2-N
X650
BK
___
L1-B
X65
0 B
N
L2-N
X650
BK
___
L1-B
X65
0 B
N
L2-N
X650
BK
___
T3 T4 T5 T6 T7 T8 T10T9
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK
L1-B
X65
0 B
N
L2-N
X650
BK___
#2#1 #4#3 #4#3 #4#3 #4#3
#4#3 #4#3 #4#3 #4
TESTPOINTS
#3
FUNCTIONALSUPPLY 1
FUNCTIONALSUPPLY 2
FUNCTIONALSUPPLY 3
POINTS
SUPPLY 4
FUNCTIONALSUPPLY 4
SW1FUNCTIONAL
SUPPLY 1
SW2FUNCTIONAL
SUPPLY 2
SW4FUNCTIONALFUNCTIONAL
SUPPLY 3
TEST
SW3
TESTPOINTS
400
228
54 RSP Rail | 01752 969321 | [email protected]
FSP03 Switchgear Assembly - Type 32SM
� Railway Cat No. 054/213914.
� RSP Part No. DLLF3P32SM.
� Class II Distribution Enclosure for 650V Signalling Systems.
� A single surge suppressor in its own housing.
Key Features: � Dedicated Surge Arrestor Module.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=100mm x H=150mm x D=99mm.
� Weight = 1Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP03 - Type 32SM
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
55 RSP Rail | 01752 969321 | [email protected]
FSP03 - Type 32SM
Power
T
B
ABB2CSM200923R1801
f1
E91/32
B
ABB2CSM200923R1801
f2 T
E91/32
FSP03 Type 32 SM
INTERNAL VIEW
150
99
100
150
P TS
L1
14 11 12
L2
#1 #2
WIRING DIAGRAM
ABBOVR T240-660
DIMENSIONING
56 RSP Rail | 01752 969321 | [email protected]
FSP04
Power
FSP0
4 Type 0
1D
LLF4P
01
FSP0
4 Type 0
2D
LLF4P
02
FSP0
4 Type 0
3D
LLF4P
03
D
LLF2P
20
-02
FSP0
4 Type 0
4D
LLF4P
04
D
LLF2P
21
-02
FSP0
4 Type 0
5D
LLF4P
05
D
LLF2P
22
-02
FSP0
4 Type 0
6D
LLF4P
06
FSP0
4 Type 0
7D
LLF4P
07
FSP0
4 Type 0
8D
LLF4P
08
FSP0
4 Type 0
9D
LLF4P
09
FSP0
4 Type 1
0D
LLF4P
10
Class II II II II II II II II II II
Feeder Switches 1 1 1 1 2 2 1 1 2 2
Functional Supplies 1 1 1 1 1 1 2 2 2 2
Feeder Cable Size
(Cu or Al)6-50mm² 6-50mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm²
Type of Fuses IEC BS88 IEC BS88 IEC BS88 IEC BS88 IEC BS88
Dimensions (mm)W=300H=200D=224
W=300H=200D=224
W=300H=300D=224
W=300H=300D=224
W=300H=300D=224
W=300H=300D=224
W=400H=300D=221
W=400H=300D=221
W=400H=300D=221
W=400H=300D=221
Weight 5Kg 5Kg 6Kg 6Kg 6Kg 6Kg 7.5Kg 7.5Kg 7.5Kg 7.5Kg
Railway Cat No. 092/002324 092/002325 092/002326 092/002327 092/002328 092/002329 092/002330 092/002331 092/002332 092/002333
Additional CommentsFunctional
supplies share a common fuse
Functional supplies share a
common fuse
• NetworkRailProductAcceptanceCertificatePA05/07058.• ComplianttoNR/L2/SIGELP27409Issue2.• AllFSP04scomefittedwithRSP’suniqueremovableandsplit-ableglandplates.• SuitableforSIN119LegacyInstallationupgrades.
57 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 01
� Railway Cat No. 092/002324.
� RSP Part No. DLLF4P01.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Combined Ring Power IN/OUT Isolator.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².
� One Switched and Fused Output Functional Suppy.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=300mm x H=200mm x D=224mm.
� Weight = 5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales. Need a tailored design?
Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form
FSP04 - Type 01
58 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 01
Power
T6B
TT5
B
TT4
B
TT3
B
T
5
SWA
1
2
3
4 6
5
SW1
1
2
3
4 6
T1B
TT2
B
T
Lf1
R
Lf2
R
FSP04 Type 01
INTERNAL VIEW
DIMENSIONINGWIRING DIAGRAM
200
260
300
110
200
200
224
POINTINCOMING
#3
#3
#3 #4
#4
#4
#1 #2#1 #2 #5 #6 #5
TESTSUPPLY
#6
OUTGOINGSUPPLYPOINT
INOUT
TEST FUNCTIONALCIRCUIT 1
59 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 02
� Railway Cat No. 092/002325.
� RSP Part No. DLLF4P02.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Combined Ring Power IN/OUT Isolator.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².
� One Switched and Fused Output Functional Suppy.
� Functional Supply Fuse Carriers BS88.
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=300mm x H=200mm x D=224mm.
� Weight = 5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 02
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
60 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 02
Power
T6
B
TT5
B
TT4
B
TT3
B
T
SWA
1
2
3
4
5
6
SW1
1
2
3
4
5
6
T1
B
TT2
B
T
f1 L
R
f2 L
R
FSP04 Type 02WIRING DIAGRAM DIMENSIONING
INTERNAL VIEW
200
260
300
110
200
224
200
POINTPOINT
#3
#3
#3 #4
#4
#4
#1 #2#1 #2 #5 #6 #5
TEST
OUT
#6
OUTGOINGSUPPLYSUPPLY
IN
INCOMING TEST FUNCTIONALCIRCUIT 1
61 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 03
� Railway Cat No. 092/002326.
� RSP Part No. DLLF4P03.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Combined Ring Power IN/OUT Isolator.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� One Switched and Fused Output Functional Suppy.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=300mm x H=300mm x D=224mm.
� Weight = 6Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 03
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
62 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 03
Power
T6B
TT5
B
TT4
B
TT3
B
T
2
3
4
5
SWA
1
62
3
4
5
SW1
1
6
T1B
TT2
B
T
f1 L
R
f2 L
R
FSP04 Type 03
POINT
#3
#3
POINT
#3 #4
#4
#4
#1 #2#1 #2 #5 #6 #5
TEST
OUT
#6
OUTGOINGSUPPLYSUPPLY
IN
INCOMING TEST FUNCTIONALCIRCUIT 1
225
300
190
300
260
300
200
WIRING DIAGRAM DIMENSIONING
INTERNAL VIEW
63 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 04
� Railway Cat No. 092/002327.
� RSP Part No. DLLF4P04.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Combined Ring Power IN/OUT Isolator.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� One Switched and Fused Output Functional Suppy.
� Functional Supply Fuse Carriers BS88.
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=300mm x H=300mm x D=224mm.
� Weight = 6Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 04
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
64 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 04
Power
T6B
TT5
B
TT4
B
TT3
B
T
4
5
SWA
1
2
3
64
5
SW1
1
2
3
6
T1B
TT2
B
T
f1 L
R
f2 L
R
WIRING DIAGRAM DIMENSIONINGFSP04 Type 04
INTERNAL VIEW
POINTPOINT
#3
#1 #3 #4
#4
#4
#3
#2#1 #2 #5 #6 #5
TEST
OUT
#6
OUTGOINGSUPPLYSUPPLY
IN
INCOMING TEST FUNCTIONALCIRCUIT 1
200
190
300
260
300
225
300
65 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 05
� Railway Cat No. 092/002328.
� RSP Part No. DLLF4P05.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� One Switched and Fused Output Functional Suppy.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=300mm x H=300mm x D=224mm.
� Weight = 6Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 05
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
66 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 05
Power
2
3
4
5
SW2
1
6
1
2
3
4
5
SWA
62
3
4
5
SW1
1
6
T1B
T T2B
T T6B
TT5B
T
f1 L
R
f2 L
R
T4B
TT3B
T
WIRING DIAGRAM DIMENSIONINGFSP04 Type 05
INTERNAL VIEW
190
300
300
200
260
225
300
#4
#3
#1
#3
OUTGOINGSUPPLY
#3
#3 #4#2
INCOMINGCIRCUIT 1
#5
#4
IN
#6
OUT
#1
FUNCTIONALPOINT SUPPLY
#5
#2#6
TEST
TESTPOINT
#4
67 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 06
� Railway Cat No. 092/002329.
� RSP Part No. DLLF4P06.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� One Switched and Fused Output Functional Suppy.
� Functional Supply Fuse Carriers BS88.
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=300mm x H=300mm x D=224mm.
� Weight = 6Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 06
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
68 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 06
Power
3
4
5
SW2
1
2 6
1
2
3
4
5
SWA
6
3
4
5
SW1
1
2 6
T1B
TT2
B
TT6
B
TT5
B
T
Lf1
R
Lf2
R
T4B
TT3
B
T
WIRING DIAGRAM DIMENSIONINGFSP04 Type 06
INTERNAL VIEW
INCOMING
#4
#1
#3#4
SUPPLY
#3
#3 #4#2
OUTGOINGCIRCUIT 1
#5
#3
IN
#6
OUT
#1
FUNCTIONALPOINT SUPPLY
#5
#2#6
TEST
TESTPOINT
#4
300
225
200
190
300
260
300
69 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 07
� Railway Cat No. 092/002330.
� RSP Part No. DLLF4P07.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Combined Ring Power IN/OUT Isolator.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Two Switched & Fused Output Functional Supplies.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=400mm x H=300mm x D=221mm.
� Weight = 7.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 07
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
70 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 07
Power
T6B
TT5
B
T
Lf1
R
Lf2
R
3
4
5
SWB
1
2 6
5
SWA
1
2
3
4 6
5
SW1
1
2
3
4 6
T1B
TT2
B
TT4
B
TT3
B
TT8
B
TT7
B
T
Lf3
R
Lf4
R
WIRING DIAGRAM DIMENSIONINGFSP04 Type 07
INTERNAL VIEW
221
300
300
210
400
360
300
#4
TEST
#3
#3 #4
FUNCTIONAL
POINT
CIRCUIT 1
#5 #6
#1
#4
FUNCTIONALSUPPLY
#1#2
INCOMINGSUPPLY
#5 #6
#3
#3 #4#2
OUTGOINGCIRCUIT 2
#3
#4
#3
#4
IN
TESTPOINTOUT
71 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 08
� Railway Cat No. 092/002331.
� RSP Part No. DLLF4P0.
� Class II Distribution Enclosure for 650V Signalling Systems.
Key Features: � Combined Ring Power IN/OUT Isolator.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Two Switched & Fused Output Functional Supplies.
� Functional Supply Fuse Carriers BS88.
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=400mm x H=300mm x D=221mm.
� Weight = 7.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 08
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
72 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 08
Power
T6B
TT5
B
T
Lf1
R
f2 L
R
SWB
1
2
3
4
5
62
3
4
5
SWA
1
6
SW1
1
2
3
4
5
6
T1B
TT2
B
TT4
B
TT3
B
TT8
B
TT7
B
T
f3 L
R
f4 L
R
WIRING DIAGRAM DIMENSIONINGFSP04 Type 08
INTERNAL VIEW
300
210
400
360
300
300
221
#3
#5
#3
OUTGOING
#4
#4
#4
CIRCUIT 1
#1
#6
FUNCTIONAL FUNCTIONAL
#4
SUPPLY
#1
SUPPLYINCOMING
#2 #5 #6
#3
#3 #4#2
POINT
CIRCUIT 2
#3
#4
#3
TEST
IN
TESTPOINTOUT
73 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 09
� Railway Cat No. 092/002332.
� RSP Part No. DLLF4P09.
� Class II Distribution Enclosure for 650V Signalling Systems.
� Functional supplies share a common fuse.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Two Switched Output Functional Supplies sharing a common fuse.
� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=400mm x H=300mm x D=221mm.
� Weight = 7.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 09
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
74 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 09
Power
1
2
3
4
5
SWB
6
1
2
3
4
5
SWA
6
1
2
3
4
5
SW1
6
T2B
TT1
B
TT4
B
TT3
B
TT6
B
TT5
B
T
Lf1
R
Lf2
R
Lf3
R
Lf4
R
T9B
T
T8B
TT7
B
T
T10B
T
WIRING DIAGRAM DIMENSIONINGFSP04 Type 09
INTERNAL VIEW
300
221
300
210
400
360
300
SUPPLY
#2#1
SECONDARY
#4
SUPPLY
#3
#3 #4#2
POINTSUPPLY
#1 #4
#3
#3
INCOMINGTEST
OUTGOING
#4
#5 #6
PRIMARYCIRCUITSUPPLY 2
SUPPLYFUNCTIONAL
IN
#5 #6
TESTPOINTOUT
75 RSP Rail | 01752 969321 | [email protected]
FSP04 Switchgear Assembly - Type 10
� Railway Cat No. 092/002333.
� RSP Part No. DLLF4P10.
� Class II Distribution Enclosure for 650V Signalling Systems.
� Functional supplies share a common fuse.
Key Features: � Dedicated Ring Power IN and OUT Isolators.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Two Switched Output Functional Supplies sharing a common fuse.
� Functional Supply Fuse Carriers BS88.
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.
� Dimensions W=400mm x H=300mm x D=221mm.
� Weight = 7.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
FSP04 - Type 10
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
76 RSP Rail | 01752 969321 | [email protected]
FSP04 - Type 10
Power
2
3
4
5
SWB
1
64
5
SWA
1
2
3
64
5
SW1
1
2
3
6
T2B
TT1
B
TT4
B
TT3
B
TT6
B
TT5
B
T
f1 L
R
f2 L
R
f3 L
R
f4 L
R
T9B
T
T8B
TT7
B
T
T10B
T
WIRING DIAGRAM DIMENSIONINGFSP04 Type 10
INTERNAL VIEW
300
300
400
360
210
300
221
186
SUPPLY
OUTGOING
#1
SECONDARY
#4
SUPPLY
#3
#3 #4#2
INCOMINGSUPPLY
#1 #2
#3
#3 #4
#4
POINTTEST
#5 #6
PRIMARYCIRCUITSUPPLY 2
SUPPLYFUNCTIONAL
IN
#5 #6
TESTPOINTOUT
78 RSP Rail | 01752 969321 | [email protected]
Terminal Chambers• NetworkRailProductAcceptanceCertificatePA05/07058.• SuitableforSIN119LegacyInstallationupgrades.
2 Core Cable - Terminal Chambers 4 Core Cable - Terminal Chambers
TC04
Type 20
DLLT4
P2
0
TC04
Type 21
DLLT4
P2
1
TC04
Type 22
DLLT4
P2
1
TC04
Type 23
DLLT4
P2
3
TC04
Type 24
DLLT4
P2
4
TC04
Type 25
DLLT4
P2
5
TC04
Type 26
DLLT4
P2
6
TC04
Type 27
DLLT4
P2
7
TC04
Type 28
DLLT4
P2
8
TC04
Type 29
DLLT4
P2
9
TC04
Type 30
DLLT4
P3
0
TC04
Type 31
DLLT4
P3
1
Class II II II II II II II II II II II II
No of Terminals 2 2 2 2 2 2 4 4 4 4 4 4
Type of Terminals Screw Screw Lug Screw Screw Lug Screw Screw Lug Screw Screw Lug
Feeder Cable Size (Cu or Al)
6-50mm² 16-120mm² 16-120mm² 6-50mm² 16-120mm² 16-120mm² 6-50mm² 16-120mm² 16-120mm² 6-50mm² 16-120mm² 16-120mm²
Dimensions (mm)W=300H=200D=132
W=300H=200D=187
W=300H=200D=132
W=300H=300D=133
W=300H=300D=188
W=300H=300D=133
W=300H=200D=132
W=300H=200D=187
W=300H=200D=132
W=300H=300D=133
W=300H=300D=188
W=300H=300D=133
Weight 4.5Kg 4.5Kg 4.5Kg 5.5Kg 5.5Kg 5.5Kg 4.5Kg 4.5Kg 4.5Kg 5.5Kg 5.5Kg 5.5Kg
Railway Cat No. 092/002334 092/002335 092/002336 092/002337 092/002338 092/002339 092/002340 092/002341 092/002342 092/002343 092/002344 092/002345
Additional Comments
79 RSP Rail | 01752 969321 | [email protected]
Terminal Chambers
2 x 2 Core Cables – Segregated Terminal Chambers 2 x 2 Core Cables with Brass Plate for Terminating Shield/Earth
TC04 Type 32DLLT4P32
TC04 Type 33DLLT4P33
TC04 Type 34DLLT4P34
TC04 Type 40DLLT4P40
TC04 Type 41DLLT4P41
Class II II II II II
No of Terminals 4 4 4 1 2
Type of Terminals Screw Screw Lug Brass Plate Brass Plates
Feeder Cable Size (Cu or Al)
6-50mm² 16-120mm² 16-120mm² 50-120mm² 50-120mm²
Dimensions (mm)W=300H=300D=133
W=300H=300D=188
W=300H=300D=133
W=300H=200D=132
W=500H=200D=132
Weight 5.5Kg 5.5Kg 5.5Kg 4.5Kg 9Kg
Railway Cat No. 092/002346 092/002347 092/002348 092/002349 092/002350
Additional Comments
80 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 20
� Railway Cat No. 092/002334.
� RSP Part No. DLLT4P20.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Two Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=200mm x D=132mm.
� Weight = 4.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
Need a tailored design? Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form
TC04 - Type 20
Power
81 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 20
Power
CONFIGURATION DIMENSIONINGTC04 Type 20
INTERNAL VIEW
200
200
300
260
110
200
132
82 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 21
� Railway Cat No. 092/002335.
� RSP Part No. DLLT4P21.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Two Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=200mm x D=187mm.
� Weight = 4.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 21
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
83 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 21
Power
DIMENSIONINGTC04 Type 21
CONFIGURATION
INTERNAL VIEW 187
200
200
300
260
110
200
84 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 22
� Railway Cat No. 092/002336.
� RSP Part No. DLLT4P22.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Two Lug Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=200mm x D=132mm.
� Weight = 4.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 22
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
85 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 22
Power
CONFIGURATION DIMENSIONINGTC04 Type 22
INTERNAL VIEW
200
110
300
260
200
200
132
86 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 23
� Railway Cat No. 092/002337.
� RSP Part No. DLLT4P23.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Two Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=133mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 23
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
87 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 23
Power
CONFIGURATION DIMENSIONINGTC04 Type 23
INTERNAL VIEW
200
190
300
260
300
133
300
88 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 24
� Railway Cat No. 092/002338.
� RSP Part No. DLLT4P24.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Two Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=188mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 24
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
89 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 24
Power
CONFIGURATION DIMENSIONINGTC04 Type 24
INTERNAL VIEW
200
190
300
260
300
300
188
90 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 25
� Railway Cat No. 092/002339.
� RSP Part No. DLLT4P25.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Two Lugs Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=133mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 25
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
91 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 25
Power
CONFIGURATION DIMENSIONINGTC04 Type 25
INTERNAL VIEW
200
190
300
260
300
300
133
92 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 26
� Railway Cat No. 092/002340.
� RSP Part No. DLLT4P26.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=200mm x D=132mm.
� Weight = 4.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 26
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
93 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 26
Power
CONFIGURATION DIMENSIONINGTC04 Type 26
INTERNAL VIEW
200
110
300
260
200
200
132
94 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 27
� Railway Cat No. 092/002341.
� RSP Part No. DLLT4P27.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=200mm x D=187mm.
� Weight = 4.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 27
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
95 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 27
Power
CONFIGURATION DIMENSIONINGTC04 Type 27
INTERNAL VIEW
200
187
200
110
260
300
200
96 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 28
� Railway Cat No. 092/002342.
� RSP Part No. DLLT4P28.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Lug Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=200mm x D=132mm.
� Weight = 4.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 28
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
97 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 28
Power
CONFIGURATION DIMENSIONINGTC04 Type 28
INTERNAL VIEW
300
110
200
260
200
200
132
98 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 29
� Railway Cat No. 092/002343.
� RSP Part No. DLLT4P29.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=133mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 29
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
99 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 29
Power
CONFIGURATION DIMENSIONINGTC04 Type 29
INTERNAL VIEW
190
200
260
300
300
300
133
100 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 30
� Railway Cat No. 092/002344.
� RSP Part No. DLLT4P30.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=188mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 30
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
101 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 30
Power
CONFIGURATION DIMENSIONINGTC04 Type 30
INTERNAL VIEW
300
188
200
190
260
300
300
102 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 31
� Railway Cat No. 092/002345.
� RSP Part No. DLLT4P31.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Lug Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=133mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 31
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
103 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 31
Power
CONFIGURATION DIMENSIONINGTC04 Type 31
INTERNAL VIEW
300
190
200
260
300
300
133
104 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 32
� Railway Cat No. 092/002346.
� RSP Part No. DLLT4P32.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=133mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 32
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
105 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 32
Power
CONFIGURATION DIMENSIONINGTC04 Type 32
INTERNAL VIEW
200
190
300
260
300
300
133
106 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 33
� Railway Cat No. 092/002347.
� RSP Part No. DLLT4P33.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Screw Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=188mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 33
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
107 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 33
Power
CONFIGURATION DIMENSIONINGTC04 Type 33
INTERNAL VIEW
300
188
200
190
300
260
300
108 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 34
� Railway Cat No. 092/002348.
� RSP Part No. DLLT4P34.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Four Lug Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 16-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=300mm x D=133mm.
� Weight = 5.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 34
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
109 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 34
Power
CONFIGURATION DIMENSIONINGTC04 Type 34
INTERNAL VIEW
300
133
200
190
300
260
300
110 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 40
� Railway Cat No. 092/002349.
� RSP Part No. DLLT4P40.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � One Brass Plate Type Terminal.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 50-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=300mm x H=200mm x D=132mm.
� Weight = 4.5Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 40
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
111 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 40
Power
DIMENSIONINGTC04 Type 40
CONFIGURATION
INTERNAL VIEW
200
200
260
300
110
200
132
112 RSP Rail | 01752 969321 | [email protected]
2 Core Cable Terminal Chambers - Type 41
� Railway Cat No. 092/002350.
� RSP Part No. DLLT4P41.
� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.
Key Features: � Two Brass Plate Type Terminals.
� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 50-120mm².
� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 1.
� Dimensions W=500mm x H=200mm x D=132mm.
� Weight = 9Kg.
SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.
TC04 - Type 41
Power
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
113 RSP Rail | 01752 969321 | [email protected]
TC04 - Type 41
Power
CONFIGURATION DIMENSIONINGTC04 Type 41
INTERNAL VIEW
400
200
460
500
110
200
132
115 RSP Rail | 01752 969321 | [email protected]
PSP/ASP
Available in standard Network Rail sizes from type 1 to 9 or made to your bespoke dimensions. RSP can provide REB style buildings to create modular, compact and mini PSP/ASP solutions to meet any requirements.
Key Features: � Built to either your own design or allow us to produce detailed design using
our unique RSP standardised approach to provide; greater consistency, improved lead times and cost savings.
� Available in a range of RAL colours including standard Green and Grey railway options.
� Built and tested to BS EN61439 and BS7671 using industry leading materials and switchgear and with a fully documented client focussed Factory Acceptance Test.
� Available with re-enforced flooring to enable both generator and UPS installation.
� Full range of options available including: additional internal walls, removable side walls, floor re-enforcement, bespoke lighting arrangements, forced air ventilation or air conditioning as required, intruder and fire alarms.
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Power
117 RSP Rail | 01752 969321 | [email protected]
DNO Cubicles
Choose from one of our standard size and layout solutions or allow us to design and build a bespoke solution to suit your needs. Our DNO cubicles come in both single phase 230V and 3 Phase 400V versions.
Key Features: � Supplied complete with full detailed design and O&M manuals in accordance
with NR/L2/SIG/ELP/27417 for ease of handover and entry into service.
� Fully built and tested in accordance with BS EN 61439 with a fully documented client focussed Factory Acceptance Test.
� Available in either GRP, mild or stainless steel enclosures.
� Using industry leading materials and switchgear.
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Power
119 RSP Rail | 01752 969321 | [email protected]
Points Heating Control Cubicles
Choose from one of our standard size and layout solutions or allow us to design and build a bespoke solution to suit your needs. Our Points Heating Control Cubicles are available in Single or 3 Phase versions capable of feeding up to 8 Point ends.
Key Features: � Supplied complete with full detailed design and O&M manuals in accordance
with NR/L2/SIG/ELP/27417 for ease of handover and entry into service.
� Fully built and tested in accordance with BS EN 61439 with a fully documented client led Factory Acceptance Test provided.
� Available in either GRP, mild or stainless steel enclosures.
� Using industry leading materials and switchgear.
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Power
121 RSP Rail | 01752 969321 | [email protected]
LCU / LCC
Choose from one of our standard size and layout solutions for Lighting Control Cubicles (LCC) or allow us to design and build a bespoke solution to suit your needs.
Don’t need an entire cubicle? RSP can also supply a factory built and fully tested Lighting Control and Override Unit (LCU) to retrofit inside an existing housing at a fraction of the cost of an entire cubicle - quote RSP Part Number DLLLCU01.
Key Features: � Supplied complete with full detailed design and O&M manuals in accordance
with NR/L2/SIG/ELP/27417 for ease of handover and entry into service.
� Fully built and tested in accordance with BS EN 61439 with a fully documented client led Factory Acceptance Test provided.
� Available in either GRP, mild or stainless steel enclosures.
� Using industry leading materials and switchgear.
Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form
Power
RSP Rail | 01752 969321 | [email protected]
Call: 01752 969321
Email: [email protected]
Visit: www.rsprail.co.uk
17 Moorlands Lane Saltash, Cornwall PL12 4HJ