railing components · railing components brass and stainless steel fittings, tubing and extrusions...
TRANSCRIPT
Railing ComponentsBrass and Stainless Steel Fittings, Tubing and Extrusions
C a t a l o g N o . 1 1 0 2
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
2
Handrails 4-7
Short Rails 8-9
Footrails and Armrails 10-11
Flanges, Finials and 12-13Mounting Solutions
Ball Fittings 14-15
Flush Fittings 16-17
Ball Fitting Posts: 18Factory Assembled
Flush Fitting Posts: 19Factory Assembled
Free Standing Rails 20-21
Glass Clips and 22-24Cap Rails
Booth Divider Posts 25-26
Universal and Adjustable 27Railing Connectors
Tubing and Extrusions 28-30
Finishes and Specifications 31
This catalog is part of a series of catalogsdescribing our full product line. The seriesconsists of the following:
• Catalog I - Public Guidance Systems• Catalog II - Hospitality Fixtures• Catalog III - Railing Components
Featured in this Railing Components catalog, aresolid brass and stainless steel components that canbe utilized in most railing applications, as well asprefabricated systems that are "ready-to-install".
Our large on-hand inventory, knowledgeable salesstaff and highly skilled design/manufacturingdepartment, provide you with a quick delivery ofproducts that meet your exact needs.
Lavi Industries was founded in 1979 for the purposeof producing architectural products that meet thehighest quality standards for the commercialenvironment.
We recognize the high demand placed on ourproducts, and therefore they are crafted andfinished to meet the expectations of the mostdiscriminating client.
We invite you to participate in our quest forexcellence.
The products in this catalog are continuously being developed and improved upon. Specifications, data and dimensions may change withoutnotice. When these specifications orcolors are critical, consult factory forcurrent information.
RAILING COMPONENTS Table of Contents
East Coast FacilitiesLavi Industries - New YorkTwo Geneva RoadBrewster, New York 10509877.213.lavi (213.5284)845.278.1766845.278.1765 fax
3
West Coast FacilitiesLavi Industries - California
27810 Avenue HopkinsValencia, California 91355
877.ask.lavi (275.5284)661.257.7800
661.257.4938 fax
4
301StandardHandrailBracket
Our Glass Handrail Bracket 304in stainless steel, is designed to bemounted through a predrilledhole in the glass panel.(see page 7)
606Scroll Finial
Notes:
• All fittings are supplied with necessary hardware forinstallation.
• Mount brackets to stud in wall.
• Maximum spacing between brackets – 4 feet.
• Consult local codes for rail height and other requirements.
RAILING COMPONENTS Handrails
Pages 4 thru 7 feature a variety of Handrailsolutions. The pages are organized for quickreference of all components necessary tocomplete your project.
Pages 4 thru 7 feature a variety of Handrailsolutions. The pages are organized for quickreference of all components necessary tocomplete your project.
Fittings aresupplied withself-drilling /
self-tappinghardware
Tubing & BendsTubing product # diameter thickness mill lengthA110 1-1/2" .050 12, 16 ft.A120 2" .050 12, 16 ft.Stainless steel tubing available in 20 ft. lengths only.
Bendsproduct # diameter thickness angle radiusA110/903 1-1/2" .050 90° bend 3" radiusA120/903 2" .050 90° bend 3" radiusA110/333 1-1/2" .050 147° bend 3" radiusA120/333 2" .050 147° bend 3" radius
Tubing splice available. Order part number 830 in 1-1/2" or 2" diameter. See Page 28.
5
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
310Flat Handrail Bracketitem# cp d310 2-1/4" 2-1/2"
311Deluxe Flat Handrail Bracketitem# cp d311 3" 3-1/4"
533Adjustable Flangeitem# tubing h d533/2 2" 2-15/16" 4"
D
CP
304Glass Mount Handrail Bracketitem# tubing cp d304/1-1/2 1-1/2" 2-1/4" 2-1/2"304/2 2" 2-1/2" 2-1/2"
D
CP
CP
D
H
D
Handrails RAILING COMPONENTS
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
Finishes:Polished, satin, chromeplated or Lido-Tone® powdercoating.See page 31 for finishes.
Lavi Industriesuses Alloy 304 solidstainless steel on all railingcomponents.
NEWITEM
W
L
732Flush Ellitem# tubing w l732/1-1/2 1-1/2" 2" 2"732/2 2" 2-1/2" 2-1/2"
730AFlush 147° Angleitem# tubing w l730A/1-1/2 1-1/2" 2-1/4" 3-1/4"730A/2 2" 2-3/4" 3-3/4"
W
L
H
W
606Scroll Finialitem# tubing w h606/1-1/2 1-1/2" 2-3/4" 2-7/8"606/2 2" 3" 3-1/8"
W
H
608Wall Returnitem# tubing w h608/1-1/2 1-1/2" 3" 2-3/4"608/2 2" 3-1/4" 3"
730A*
301608
533 7" StepHeight
11" StepWidth
*730A is angled at 33° to fit most stairs.
D
CP
301*Standard Handrail Bracketitem# tubing cp d301/1-1/2 1-1/2" 2-1/2" 2-1/2"301/2 2" 2-1/2" 2-1/2"*301 available with concealed mount.
D
CP
302Deluxe Handrail Bracketitem# tubing cp d302/2 2" 2-3/4" 3-1/8"
6
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
H1600CBitem # a bH1600CB 5-3/4" 5-3/4"
H1600LTitem # a bH1600LT 4-1/2" 5-1/4"
B
A
H1600SLitem # a bH1600SL 9" 11-1/4"
B
A
H1600SRitem # a bH1600SR 9" 11-1/4"
B
A
H1600SEitem # a bH1600SE 2-1/2" 5-1/4"
B
A
B
A
Cap Rail & Extrusions Cap Rail part # a b mill lengthH1300 1-5/8" 1-1/16" 16 ft.H1600 2" 1-5/16" 16 ft.H1800 2-1/4" 1-9/16" 16 ft.
Extrusionspart # a b mill lengthB0202 1/4" 1/4" 12 ft.B0404 1/2" 1/2" 12 ft.
Materials:Solid Brass
Finishes:Polished.
B
B0404Picket
A
H1600PC*Picket Collaritem # a bH1600PC 1-1/2" 2"*H1600PC is used with picketextrusion B0404. See chart below fordimensions.
B
A
H1600Eitem # a bH1600E 2" 3-1/2"
B
A
H1600BFitem # a bH1600BF 3-1/4" 3"
BA
B
A
RAILING COMPONENTS Handrails
310*Flat Handrail Bracketitem# cp d310 2-1/2" 2-3/8"*Available in polished andclear coat finishes.
311*Deluxe Flat Handrail Bracketitem# cp d311 3" 3-1/4"*Available in polished andclear coat finishes.
D
CP
CP
D
Typical Rail Installation
H1600Cap Rail
H1600EEnd Finial
H1600PCPicket Collar
B0202/B0404Picket
Handrail BracketItem# Tubing CP D308/1-1/2 1-1/2" 3" 3"308/2 2" 3" 3"
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Handrails RAILING COMPONENTS
D
CP
D
CP
D
CP
D
CP
Saddle Post – LowItem# Tubing CP D348/1-1/2 1-1/2" 4" 3"348/2 2" 4-1/8" 3"
Saddle Post – TallItem# Tubing CP D348L/1-1/2 1-1/2" 6" 3"348L/2 2" 6-1/8" 3"
Glass Mounted BracketItem# Tubing CP D308GM/1-1/2 1-1/2" 3" 3"308GM/2 2" 3" 3"
348 348L
308 308GM
300STM 300P 300GP300HS 300PS
Bracket StemItem# Height300STM 2-1/4"300STM/L 4-1/4"
Hardware sold separately
Handrail SaddleItem# Tubing Dia.300HS/1-1/2 1-1/2"300HS/2 2"
Hardware sold separately
Post SaddleItem# Tubing Dia.300PS/1-1/2 1-1/2"300PS/2 2"
Hardware sold separately
Bracket MountingPlateItem# Diameter300P 3"300P/U (Undrilled)3"Hardware sold separately
Glass MountingBack PlateItem# Diameter300GP 3"
Hardware sold separately
Lavi Industries introduces an innovativesystem for railing support. You can create avariety of handrail and short rail bracketsfor mounting 1-1/2" and 2" rails. The useof these brackets will present a consistentappearance throughout your space.
7
Lavi Industries uses Alloy304 solid stainless steel on allrailing components.
Stainless SteelPolished / Satin
8
600Flush End Cap
The various posts in this system are designedto project a short distance from the mountingsurface. Typical applications include:
• Handrails• Door Pulls• Café Curtain Rods• Chair Guard Rails
RAILING COMPONENTS Short Rails
341Saddle Post
Notes:
• All fittings are supplied with necessary hardware forinstallation.
• Mount brackets to stud in wall.
• Maximum spacing between brackets – 4 feet.
• Consult local codes for rail height and other requirements.
The various posts in this system are designedto project a short distance from the mountingsurface. Typical applications include:
• Handrails• Door Pulls• Café Curtain Rods• Chair Guard Rails
Fittings aresupplied withself-drilling /
self-tappinghardware
9
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Tubing & Oak Full Round
Short Rails RAILING COMPONENTS
D
CP
330 Ball End Postitem# tubing cp d330/1 1" 2-3/4" 2-1/4"330/1-1/2 1-1/2" 2-3/4" 2-15/16"330/2 2" 3" 3-3/8"
HD
600Flush End Capitem# tubing d h600/1 1" 1" 1/8"600/1-1/2 1-1/2" 1-1/2" 1/8"600/2 2" 2" 1/8"
D
CP
332 Ball Center Postitem# tubing cp d332/1 1" 2-3/4" 2-1/4"332/1-1/2 1-1/2" 2-3/4" 2-15/16"332/2 2" 3" 3-3/8"
D
CP
334Ball End Post6" highitem# tubing cp d334/2 2" 5" 3-1/4"
A
B
814Curtain Ringitem# tubing a b814/1 1" 2-1/8" 5/16"814/1-1/2 1-1/2" 2-7/16" 3/8"814/2 2" 2-7/8" 7/16"
D
CP
342Flush Center Postitem# tubing cp d342/1 1" 2-1/8" 1-3/4"342/1-1/2 1-1/2" 2-7/16" 2-5/16"342/2 2" 3-1/4" 2-1/2"
W
L
730Flush 135° Angleitem# tubing w l730/1-1/2 1-1/2" 2-3/8" 3"730/2 2" 2-7/8" 3-3/8"
D
CP
D
CP
336Ball Center Post6" highitem# tubing cp d336/2 2" 5" 3-1/4"
W
L
732Flush Ellitem# tubing w l732/1-1/2 1-1/2" 2" 2"732/2 2" 2-1/2" 2-1/2"
Lavi Industriesuses Alloy 304
solid stainless steel on allrailing components.
Finishes:See page 31 for a full list offinishes.
product # diameter thickness mill lengthA100 1" .050 12 ft.A110 1-1/2" .050 12, 16 ft.A120 2" .050 12, 16 ft.A210 1-1/2" solid oak 12 ft.A220 2" solid oak 12 ft.Stainless steel tubing available in 20 ft. lengths only.
Tubing splice available. Order part number 830 in 1-1/2" or 2" diameter. See Page 28.
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
340Flush End PostItem# tubing cp d340/1 1" 2-1/8" 1-3/4"340/1-1/2 1-1/2" 2-7/16"2-5/16"340/2 2" 3-1/4" 2-1/2"
H
D
600W*Outer End Capitem# tubing d h600W/2 2" 2-1/8" 7/8"* Ideal for use with wood rail.
D
CP
341*Saddle Postitem# tubing cp d341/1-1/2 1-1/2" 2-7/16" 2-5/16"341/2 2" 3-1/4" 2-1/2"* 341 available with concealed mount.
10
400CombinationBracket
Footrails are traditional where bar-height seatingis utilized. When heavy use is anticipated, steelinserts provide added strength (A110SL orA120SL). 4-foot spacing between brackets isrecommended.
RAILING COMPONENTS Footrails and Armrails
730Flush 135°Angle
The Bar Mount Footrail bracket(part no. 402) is used whenunobstructed clearance isrequired between floor and rail.
604Ball Finial
LB-00202Lido-Lustre™ Metal PolishCream should be used torepolish uncoated brass,aluminum and stainlesssteel. Available in 6.33 oz.tubes and 16 oz. jars.
Footrails are traditional where bar-height seatingis utilized. When heavy use is anticipated, steelinserts provide added strength (A110SL orA120SL). 4-foot spacing between brackets isrecommended.
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
11
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Tubing & Steel InsertsTubingproduct # diameter thickness mill lengthA110 1-1/2" .050 12, 16 ft.A111 1-1/2" .065 16 ft.A120 2" .050 12, 16 ft.A121 2" .065 16 ft.A140 3" .050 12 ft.A141 3" .065 16 ft.
Steel Insertproduct # diameter thickness mill lengthA110SL 1-1/2" - 12 ft.A120SL 2" - 12 ft.
Tubing splice available. Order part number 830 in 1-1/2", 2" & 3" diameter. See Page 28.
Footrails and Armrails RAILING COMPONENTS
B
CP
406Contemporary Bracketitem# tubing cp b406/2 2" 6-1/16" 2-7/8"
HD
600*Flush End Capitem# tubing d h600/1-1/2 1-1/2" 1-1/2" 1/8"600/2 2" 2" 1/8"600/2-1/2 2-1/2" 2-1/2" 3/16"600/3 3" 3" 3/16"* Use with .050 tubing only, for .065 tubing consult factory.
CP
B
410Victorian Bracketitem# tubing cp b410/2 2" 8-1/8" 4-11/16"
W
L
730*Flush 135° Angleitem# tubing w l730/1-1/2 1-1/2" 2-15/16" 3"730/2 2" 2-7/8" 3-3/8"* Use with .050 tubing only, for .065 tubing consult factory.
B
CP
CPBar Top
450Bar Armrail Bracketitem# tubing cp450/1-1/2 1-1/2" 6"450/2 2" 5-5/8"450/2-1/2 2-1/2" 7"450/3 3" 7"
W
L
731*Flush Radius Ellitem# tubing w l731/1-1/2 1-1/2" 2-7/8" 2-7/8"731/2 2" 3" 3"* Use with .050 tubing only, for .065 tubing consult factory.
CP
B
404Floor Bracketitem# tubing cp b404/1-1/2 1-1/2" 5-5/8" 6-11/16"404/2 2" 6-1/8" 6-11/16"
CP
460Elephant Bracketitem# tubing cp460/2-1/2 2-1/2" 3-3/8"
W
L
732*Flush Ellitem# tubing w l732/1-1/2 1-1/2" 2" 2"732/2 2" 2-1/2" 2-1/2"732/3 3" 3-1/2" 3-1/2"* Use with .050 tubing only, for .065 tubing consult factory.
H
CP
400Combination Bracketitem# tubing cp h400/1-1/2 1-1/2" 6-1/8" 6-1/4"400/2 2" 6-1/8" 6-1/2"400/2-1/2 2-1/2" 6-1/8" 7-1/4"400/3 3" 9-3/4" 8-3/8"
H
D
604*Ball Finialitem# tubing d h604/1-1/2 1-1/2" 2-5/8" 3-1/4"604/2 2" 3-1/8" 4-1/2"604/3 3" 5" 7"* Use with .050 tubing only, for .065 tubing consult factory.
Stainless steel tubing
available in 20 ft.
lengths only.
402*Bar Mount Bracket*item# tubing cp b402/1-1/2 1-1/2" 6-1/16" 4"402/2 2" 6-7/8" 4-1/4"* Bar Mount Bracket may be bolted from back side for additional strength.
12
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
RAILING COMPONENTS Flanges, Finials and Mounting Solutions
45°
D
CP
515/535Angle Flangeitem# tubing d cp515/1-1/2 1-1/2" 3" 2-1/8"535/2 2" 4" 2-1/8"
H
W
536Cubical Flangeitem# tubing w h536/2 2" 4-1/2" 1-5/8"
H
D
530*/550Wall Flangeitem# tubing d h530/2 2" 4" 1-1/4"550/2-1/2 2-1/2" 5-1/2" 1-1/2"550/3 3" 5-1/2" 1-1/2"
H1
D1
D
W
511*/531Cut Flangeitem# tubing d w511/1-1/2 1-1/2" 3" 2"531/2 2" 4" 2-1/2"
H
D
532*/534Floor Flangeitem# tubing d h532/2 2" 5" 1-3/8"534/2 2" 7" 1-1/2"
12"3"
4"
542/SET & 543/SETCubical Flange and Canopyitem# tubingLR-02-543/SET 1-1/2"LR-02-542/SET 2"
H
D
512Floor Flangeitem# tubing d h512/1-1/2 1-1/2" 4" 1-1/4"
H
D533Adjustable Flangeitem# tubing d h533/2 2" 4" 2-9/16"
H
D
544/545Floor Socket w/Capitem# tubing d h544/2 2" 2-3/4" 4-1/2"545/2 2" 5" 4-1/2"
H
D
502/510*Wall Flangeitem# tubing d h502/1 1" 3" 1-1/2"510/1-1/2 1-1/2" 3" 1-1/4"
H
D
500Wall Flangeitem# tubing d h500/1 1" 2" 7/8"
H
D
552/560Floor Flangeitem# tubing d h552/2-1/2 2-1/2" 7" 1-1/2"560/3 3" 7" 1-1/2"
H
D
580/581/582/585Socket Flangeitem# tubing d h580/1 1" 1-1/8" 3/4"581/1-1/4 1-1/4" 1-3/8" 1-3/16"582/1-1/2 1-1/2" 1-5/8" 7/8"585 1-5/16" 1-5/8" 7/8"
H
W
590Square Flangeitem# tubing w h590/1 1" 3" 1-1/2"590/1-1/2 1-1/2" 3-1/2" 1-1/2"590/2 2" 4" 1-1/2"
L
W
591Cut Square Flangeitem# tubing w l591/1-1/2 1-1/2" 3-1/2" 2-1/2"591/2 2" 4" 3-1/4"
H2
D2
540/541Steel Flange and Canopyitem# tubing d-1 h-1540/1-1/2 1-1/2" 4" 1-1/2"540/2 2" 5" 1-1/2"540/3 3" 7" 1-1/2"540BT * 6" 7/8"item# tubing d-2 h-2541/1-1/2 1-1/2" 3-1/2" 12"541/2 2" 4-1/2" 12"* For use with Beltrac® Post.
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
Steel
13
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Flanges, Finials and Mounting Solutions RAILING COMPONENTS
Finishes:Polished, satin, chromeplated or Lido-Tone®
powder coating.See page 31 for finishes.
LaviIndustries
uses Alloy 304 solidstainless steel on all railingcomponents.
HD
640*Channel Tube End Capitem# tubing d h640/2 2" 2" 1/8"640/2-1/2 2-1/2" 2-1/2" 3/16"640/3 3" 3" 3/16"* For channel tubing see Cap Rail Systems for Glass on page 23.
HW
650Flat Square End Capitem# tubing w h650/1 1" 1" 1/8"650/1-1/2 1-1/2" 1-1/2" 1/8"650/2 2" 2" 1/4"
H
D
602Half Ball End Capitem# tubing d h602/1 1" 1" 1/2"602/1-1/2 1-1/2" 1-1/2" 3/4"602/2 2" 2" 1"602/3 3" 3" 7/8"
W
H
W
H
652Conical Square End Capitem# tubing w h652/1-1/2 1-1/2" 1-1/2" 3/4"652/2 2" 2" 3/4"
H
D
604Ball Finialitem# tubing d h604/1 1" 1-1/2" 2"604/1L 1" 2" 3"604/1-1/2 1-1/2" 2-5/8" 3-1/4"604/2 2" 3-1/8" 4-1/2"604/3 3" 5" 7"
HD
610Snap-On End Capitem# tubing d h610/1-1/2 1-1/2" 1-1/2" 1/32"610/2 2" 2" 1/32"
D
L
H
W
HD
600Flush End Capitem# tubing d h600/1 1" 1" 1/8"600/1-1/2 1-1/2" 1-1/2" 1/8"600/2 2" 2" 1/8"600/3 3" 3" 3/16"
HD
600WOuter End Cap*item# tubing d h600W/2 2" 2-1/8" 7/8"* Ideal for use with wood rail.
Mounting Solutions
.050 Tubing
540 Flange Canopy
Steel Insert
.050 Tubing
540 Flange Canopy
Threaded Steel Insert
541 Steel Flange
4 Lag Bolts w/ Floor Anchors
.050 Tubing
512/532Floor Flange
Wood Screws (provided)
These mounting solutions will solve most commoninstallation problems. See page 12 for a complete lineof flanges which can be utilized in these variousmounting solutions.
Type B Surface Mount
Type A Surface Mount
Type C Core Drilled
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
606Scroll Finialitem# tubing w h606/1-1/2 1-1/2" 2-3/4" 2-7/8"606/2 2" 3" 3-1/8"
700Ball Single Outletitem# tubing d l700/1-1/2 1-1/2" 2-1/2" 2-3/4"700/2 2" 3-1/4" 3-3/8"
608Wall Returnitem# tubing w h608/1-1/2 1-1/2" 3" 2-3/4"608/2 2" 3-1/4" 3"
14
Our ball fittings are used when constructingrailing in a traditional setting. The vertical postsshould be made with a continuous tube (forstrength) while the horizontals are cut and fitbetween posts.
RAILING COMPONENTS Ball Fittings
540/541Steel Flangeand Canopy
702Ball Ell
LB-00202Lido-Lustre™
Metal PolishCream
703Ball SideOutlet Ell
Our ball fittings are used when constructingrailing in a traditional setting. The vertical postsshould be made with a continuous tube (forstrength) while the horizontals are cut and fitbetween posts.
Fittings aresupplied withself-drilling /
self-tappinghardware
15
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Tubing & Oak Full Round
Ball Fittings RAILING COMPONENTS
D
L
703Ball Side Outlet Ellitem# tubing d l703/1 1" 2" 2-1/2"703/1-1/2 1-1/2" 2-1/2" 2-3/4"703/2 2" 3-1/4" 3-3/4"703/3 3" 5" 5-1/2"
D
L
706Ball Crossitem# tubing d l706/1 1" 2" 3"706/1-1/2 1-1/2" 2-1/2" 3"706/2 2" 3-1/4" 3-1/2"706/3 3" 5" 6"
D
L
700Ball Single Outletitem# tubing d l700/1-1/2 1-1/2" 2-1/2" 2-3/4"700/2 2" 3-1/4" 3-3/8"
D
L
707Side Outlet Crossitem# tubing d l707/1 1" 2" 2-1/2"707/1-1/2 1-1/2" 2-1/2" 2-3/4"707/2 2" 3-1/4" 3-3/4"
D
L
701A135° Ball Ellitem# tubing d l701A/1-1/2 1-1/2" 2-1/2" 3-1/4"701A/2 2" 3-1/4" 5"
D
L
701Ball Parallel Outletitem# tubing d l701/1-1/2 1-1/2" 2-1/2" 3"701/2 2" 3-1/4" 3-1/2"
D
L
708135° Side Outlet Ellitem# tubing d l708/1-1/2 1-1/2" 2-1/2" 3-1/4"708/2 2" 3-1/4" 5"
D
L
702Ball Ellitem# tubing d l702/1 1" 2" 2-1/2"702/1-1/2 1-1/2" 2-1/2" 2-3/4"702/2 2" 3-1/4" 3-3/4"702/3 3" 5" 5-1/2"
D
L
D
L
709135° Side Outlet Teeitem# tubing d l709/1-1/2 1-1/2" 2-1/2" 3-1/4"709/2 2" 3-1/4" 5"
D
L
Finishes:See page 31 for a full list offinishes.
800/2 AngleCollar is used todevelop theproper angle on astair railing.
product # diameter thickness mill lengthA110 1-1/2" .050 12, 16 ft.A120 2" .050 12, 16 ft.A140 3" .050 12 ft.A210 1-1/2" solid oak 12 ft.A220 2" solid oak 12 ft.
Tubing splice available.Order part number 830 in 1-1/2", 2" & 3"diameter. See Page 28.
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
D
H
800Angle Collaritem# tubing d h800/1-1/2 1-1/2" 1-3/4" 15/16"800/2 2" 2-3/16" 1"
D
H
801Flush Angle Collaritem# tubing d h801/2 2" 2" 7/8"
704Ball Teeitem# tubing d l704/1 1" 2" 2-1/2"704/1-1/2 1-1/2" 2-1/2" 2-3/4"704/2 2" 3-1/4" 3-3/4"704/3 3" 5" 5-1/2"
705Ball Side Outlet Teeitem# tubing d l705/1 1" 2" 2-1/2"705/1-1/2 1-1/2" 2-1/2" 2-3/4"705/2 2" 3-1/4" 3-3/4"
16
A streamlined look is achieved with the use offlush fittings. Lavi's component options ensuresimple assembly and flexibility to accommodateany project. Our line of flush fittings feature a 1” long sleeve (the longest in the industry) foradded strength and adhesive coverage.
RAILING COMPONENTS Flush Fittings
532Floor Flange
734Flush Tee
818CPCopedPerpendicularCollar
LB-00201Lido-Weld™
Metal Contact CementOur line of flush fittings isdesigned to work with Lido-Weld™,as they feature a 1" long sleeve forgreater adhesive coverage.
A streamlined look is achieved with the use offlush fittings. Lavi's component options ensuresimple assembly and flexibility to accommodateany project. Our line of flush fittings feature a 1” long sleeve (the longest in the industry) foradded strength and adhesive coverage.
Fittings aresupplied withself-drilling /
self-tappinghardware
17
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Flush Fittings RAILING COMPONENTS
W
L
734Flush Teeitem# tubing w l734/1-1/2 1-1/2" 3" 2-1/4"734/2 2" 3" 2-1/2"
W
L
735Flush Outlet Teeitem# tubing w l735/1-1/2 1-1/2" 3" 2-1/4"735/2 2" 3" 2-1/2"
W
L
733Flush Side Outlet Ellitem# tubing w l733/1-1/2 1-1/2" 2-1/4" 2"733/2 2" 2-1/2" 2-1/4"
W
L
731Flush Radius Ellitem# tubing w l731/1 1" 1-7/8" 1-7/8"731/1-1/2 1-1/2" 2-7/8" 2-7/8"731/2 2" 3" 3"
W
L
730Flush 135° Angleitem# tubing w l730/1-1/2 1-1/2" 2-15/16" 3"730/2 2" 2-7/8" 3-3/8"
W
L
CP
W
738135° Side Outlet Ellitem# tubing w cp738/1-1/2 1-1/2" 2-1/4" 1-3/4"738/2 2" 2-7/8" 2"
CP
D
752Flush Wall Returnitem # tubing d cp752/1-1/2 1-1/2" 3" 2-3/4"752/2 2" 4" 3"
CP
D754Wall Mount Teeitem # tubing d cp754/1-1/2 1-1/2" 3" 2-3/4"754/2 2" 4" 3"
Tubing
Lavi Industriesuses Alloy 304
solid stainless steel on allrailing components.
D
H
818*Perpendicular Collaritem# tubing d h817/1-1/2 1-1/2" 2" 1-1/2"818/1-1/2 1-1/2" 1-1/2" 1-15/16"818/2 2" 2" 2"* No installation hardware supplied.
D
H
818CP*Coped PerpendicularCollaritem# tubing d h818CP 2" 2" 15/16"* No installation hardware supplied.
730A*Flush 147° Angleitem# tubing w l730A/1-1/2 1-1/2" 2-1/4" 3-1/4"730A/2 2" 2-3/4" 3-3/4"*See page 5 for usage exampleillustration.
W
L
NEWITEM
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
product # diameter thickness mill lengthA100 1" .050 12 ft.A110 1-1/2" .050 12, 16 ft.A120 2" .050 12, 16 ft.A140 3" .050 12 ft.
Tubing splice available. Order part number 830 inappropriate diameter. See Page 28.Stainless steel tubing available in 20 ft. lengths only.
W
L
736Flush Crossitem# tubing w l736/1-1/2 1-1/2" 3" 3"736/2 2" 3" 3"
732Flush Ellitem# tubing w l732/1-1/2 1-1/2" 2" 2"732/2 2" 2-1/2" 2-1/2"732/3 3" 3-1/2" 3-1/2"
18
Single Line Ball Posts
36"42"
1-1/2"S102/3
2"S202/3S202/4
1-1/2"S103/3
2"S203/3S203/4
1-1/2"S104/3
2"S204/3S204/4
1-1/2"S105/3
2"S205/3S205/4
1-1/2"S108/3
2"S208/3S208/4
End Post Corner Post Center Post Tee Post 135° Corner Post
X
End Post Corner Post Center Post Tee Post
1-1/2"D102/3D102/4
2"D202/3D202/4
1-1/2"D103/3D103/4
2"D203/3D203/4
1-1/2"D104/3D104/4
2"D204/3D204/4
1-1/2"D105/3D105/4
2"D205/3D205/4
36"42"
End Post Corner Post Center Post Tee Post 135° Corner Post
1-1/2"L102/5L102/1
2"L202/5L202/1
1-1/2"L103/5L103/1
2"L203/5L203/1
1-1/2"L104/5L104/1
2"L204/5L204/1
1-1/2"L105/5L105/1
2"L205/5L205/1
1-1/2"L108/5
2"L208/5
6"12"
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
RAILING COMPONENTS Ball Fitting Posts: Factory Assembled
Tubing
Double Line Ball Posts
Low Line Ball PostsLow Line Posts are pre-assembled with wall flanges.Narrow (cut) flanges may be substituted on Low Line Posts at no additional charge.
LegendS = Single LineD = Double LineL = Low Line/3 = 36" Height Post/4 = 42" Height Post/5 = 6" Height Post/1 = 12" Height Post
example:S102/3 is a single linepost, 1-1/2" diameter,36" in height.
Dimensions36" Post: X = 19"42" Post: X = 22"
Materials:Solid brass or solidstainless steel.
Finishes:Polished, satin, chromeplated or Lido-Tone®
powder coating.See page 31 for finishes.
LaviIndustries
uses Alloy 304 solidstainless steel on all railingcomponents.
Prefabricated posts are factory welded toprovide for easier installation and greaterstrength. The recommended space betweenposts is 4 feet.
product # diameter thickness mill lengthA110 1-1/2" .050 12, 16 ft.A120 2" .050 12, 16 ft.
Tubing splice available. Order part number 830 in1-1/2" or 2" diameter. See page 28.Stainless steel tubing available in 20 ft. lengthsonly.
19
End Post Corner Post Center Post Tee Post 135° Corner Post
1-1/2"S132/3
2"S232/3S232/4
1-1/2"S133/3
2"S233/3S233/4
1-1/2"S134/3
2"S234/3S234/4
1-1/2"S135/3
2"S235/3S235/4
1-1/2"S138/3
2"S238/3S238/4
36"42"
X
End Post Corner Post Center Post Tee Post
1-1/2"D132/3D132/4
2"D232/3D232/4
1-1/2"D133/3D133/4
2"D233/3D233/4
1-1/2"D134/3D134/4
2"D234/3S234/4
1-1/2"D135/3D135/4
2"D235/3D235/4
36"42"
End Post Corner Post Center Post Tee Post 135° Corner Post
1-1/2"L132/5L132/11-1/2"
L232/5L232/1
1-1/2"L133/5L133/11-1/2"
L233/5L233/1
1-1/2"L134/5L134/11-1/2"
L234/5S234/1
1-1/2"L135/5L135/11-1/2"
L235/5L235/1
1-1/2"L138/5
1-1/2"L238/5
6"12"
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Flush Fitting Posts: Factory Assembled RAILING COMPONENTS
Mounting Solutions
.050 Tubing
540 Flange Canopy
Steel Insert
.050 Tubing
540 Flange Canopy
Threaded Steel Insert
541 Steel Flange
4 Lag Bolts w/ Floor Anchors
.050 Tubing
512/532Floor Flange
Wood Screws (provided)
Type B Surface Mount
Type A Surface Mount
Type C Core Drilled
These mounting solutions will solve most commoninstallation problems. Please specify which mounting ispreferred. The examples shown are priced individuallyand need to be added to “Factory Assembled” post prices.
Single Line Flush Post
Double Line Flush Post
Low Line Flush PostLow Line Posts are pre-assembled with wall flanges.Narrow (cut) flanges may be substituted on Low Line Posts at no additional charge.
Dimensions36" Post: X = 19"42" Post: X = 22"
LB-00201Lido-Weld™
Metal Contact CementOur line of flush fittings isdesigned to work withLido-Weld™, as they feature a1" long sleeve for greateradhesive coverage. UseLido-Weld™ to attachhorizontal tubing to factoryassembled posts.
20
540/541Steel Flangeand Canopy
Free Standing Rails (FSR) are usedas dividers in an open space or as atransition handrail between splitlevels. Standard components may beused or Lavi Industries can fabricatean FSR to your dimensions. Pleasesee opposing page.
RAILING COMPONENTS Free Standing Rails
LB-00202Lido-Lustre™ Metal PolishCream should be used torepolish uncoated brass,aluminum and stainlesssteel. Available in 6.33 oz.tubes and 16 oz. jars.
This removable horizontalFree Standing Rail providesa separation between thedining and dance areas.Installed with the 545 FloorSocket and Cap (page 12),the rails may be removedwhen a different roomconfiguration is required.
Fittings aresupplied with
necessaryhardware forinstallation.
21
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Free Standing Rails RAILING COMPONENTS
Sizes:1-1/2" and 2"diametertubing.
Finishes:Polished, satin, chromeplated or Lido-Tone®
powder coating.See page 31 for finishes.
LaviIndustries
uses Alloy 304 solidstainless steel on all railingcomponents.
H
W
606Scroll Finialitem# tubing w h606/1-1/2 1-1/2" 2-3/4" 2-7/8"606/2 2" 3" 3-1/8"
CP
D
820Adjustable Saddleitem# tubing d cp820/1-1/2 1-1/2" 1-1/2" 2-7/8"820/2 2" 2" 3-1/8"
D
35°
CP
822Adjustable Teeitem# tubing d cp822/2 2" 2" 3"
S2821/3Post
S2821/3 Post Detail
606Scroll Finial
821BallAdjustableSaddle
FSR 100
12"
12" 12"FSR 200 FSR 300 FSR 400
CP
D
821Ball Adjustable Saddleitem# tubing d cp821/1-1/2 1-1/2" 2" 3-5/8"821/2 2" 2" 2-7/8"
Free Standing Rails: Factory AssembledNotes:
• All fittings are suppliedwith necessary hardwarefor installation.
• For mounting solutionssee page 13.
• Consult factory formeasurement instructionguide sheets to assist inrailing dimensions.
Adjustable saddle (#820) and scrollfinial (#606) provide style andsafety for multi-level conditions.
Carpet bracket (828SET) andspirated tubing (00-A60S).Consult factory for specifications.
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
22
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
RAILING COMPONENTS Glass Clips and Cap Rails
Finishes:Polished brass, chromeplated or Lido-Tone®
powder coating.See page 31 for finishes.
W
H
812Glass Clip 1/4" Glassitem# tubing w h812/1-1/2 1-1/2" 1-1/2" 1-1/2"812/2 2" 1-1/2" 1-1/2"812/2SL (with left glass stop) 812/2SR (with right glass stop)
W
H
812FGlass Clip 1/4" Glassitem# w h812F 3/4" 1-3/4"
H
W
813Glass Clip 1/2" Glassitem# tubing w h813 2" 13/16" 1-1/2"813/SL (with left glass stop) 813/SR (with right glass stop)
H
W
813FGlass Clip 1/2" Glassitem# w h813F 13/16" 1-3/8"
813/2SR
813/2SL
Our solid brass glassclips are used tocreate booth dividersand guard rails andcan accommodate1/4" to 1/2" glass.
812/2 and 813 glass clips are available with both leftand right glass stops to provide ease of glassinstallation.
Glass Clip Exploded View
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
Glass Clips and Cap Rails RAILING COMPONENTS
308Glass Mounted BracketItem# Tubing CP D308GM/1-1/2 1-1/2" 3" 3"308GM/2 2" 3" 3"
23
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Finishes:Polished, satin, chromeplated or Lido-Tone®
powder coating.See page 31 for finishes.
Products arealso available
in solid stainless steel.Please consult your SalesRepresentative for details.
640Channel Tube End Capitem# tubing d h640/2 2" 2" 1/8"640/2-1/2 2-1/2" 2-1/2" 3/16"640/3 3" 3" 3/16"
HD
Channel TubingSolid Brass product # a (in.) b (in.) t (in.) lb./ft. mill length00-A121U 2 .75 .062 2.350 16 ft.00-A131U 2-1/2 .75 .065 2.750 16 ft.00-A142U 3 .75 .087 3.650 10 ft.
Stainless Steelproduct # a (in.) b (in.) t (in.) lb./ft. mill length40-A121U 2 .75 .062 1.950 10 ft.40-A132U 2-1/2 .75 .062 2.300 10, 19 ft.40-A142U 3 .75 .062 2.650 10 ft.40-A152U 3-1/2 .75 .062 3.000 10 ft.Tubing splice available. Order part number 830 in appropriate diameter.
Aluminum Baseproduct # a (in.) b (in.) c (in.) lb./ft. mill length50-A122B 3-1/2 2-1/4 .075 7.00 16 ft.
Claddingproduct # a (in.) c (in.) t (in.) mill length00-SRS420/3 3-1/2 .75 .050 8 ft.40-SRS420/3 3-1/2 .75 .050 8 ft.
B
A
C
TA
C
B
A T
B
A
T
D
CP
304Glass Mount Handrail Bracketitem# tubing cp d304/1-1/2 1-1/2" 2-1/4" 2-1/2"304/2 2" 2-1/2" 2-1/2"
Cap Rail System forglass componentscreate the look of afloating handrail thateasily adapts to bothtraditional andcontemporaryarchitecturalenvironments. Utilizing1/2" thick temperedglass as a structuralelement, it providessafety and anunobstructed view.
D
CP
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
RAILING COMPONENTS Glass Clips and Cap Rails
24
B
A
816/2GlassGrip™
item# tubing a b816/2 2" 2-1/4" 15/16"
B
A
816FGlassGrip™ Flatitem# a b816F 2-1/4" 15/16"
B
A
813R/2GlassGrip™ for 1/2" glassitem# tubing a b813R/2 2" 2-9/16"1-7/16"
B
A
813R/FGlassGrip™ Flat for 1/2" glassitem# a b813R/F 2-5/16"1-7/16"
NEWITEM
NEWITEM
Glass Support PinInstall through prefabricated hole in glass(optional)
Clip BaseRubber O-Rings
Clip Top
Finishes:Clear coat brass, chromeplated brass and satin /polished stainless steel.
GlassGrip™ is perfectfor all guard rail andbooth dividerapplications. It has a1/4" to 3/8"adjustable opening.
GlassGrip™
Exploded View
A
B
813/2Glass Clip for 1/2" glassitem# tubing a b813/2 2" 2-5/16"1-5/16"
A
B
813/FGlass Clip Flat for 1/2" glassitem# a b813/F 2-3/16"1-5/16"
NEWITEM
NEWITEM
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
25
Booth Divider Posts: Factory Assembled RAILING COMPONENTS
Our Divider Posts are designed to hold1/4" thick panels of glass or other materials.All posts are furnished with either channel or
glass clips for convenient and attractiveattachment of panels to posts.
Sizes:1-1/2 and 2 inch diameter tubing.
Materials:Solid brass.
Finishes:Clear coated polished brass, chrome plated or Lido-Tone® powder coating.
Options:• Posts may be ordered to accommodate 3/8" panels.
Please specify.• Height of post can be customized to accommodate your panels.• Recommended post spacing: 36" to 48".• Lavi Industries also provides glass panels. Please contact the
factory for information.
12" 10"
2"
1-1/2"PR41/L
1-1/2"PR41/E
1-1/2"PR41/T
1-1/2"PR41/C
End Post Corner Post Center Post Tee Post
PR4 Series: Short Post
16" 14"
2"
1-1/2"PR51/L
2"PR52/L
1-1/2"PR51/E
2"PR52/E
1-1/2"PR51/T
2"PR52/T
1-1/2"PR51/C
2"PR52/C
End Post Corner Post Center Post Tee Post
PR5 Series: Dome Post
Our Divider Posts are designed to hold1/4" thick panels of glass or other materials.All posts are furnished with either channel or
glass clips for convenient and attractiveattachment of panels to posts.
26
1-1/2"PR61/L
2"PR62/L
1-1/2"PR61/E
2"PR62/E
1-1/2"PR61/T
2"PR62/T
1-1/2"PR61/C
2"PR62/C
End Post Corner Post Center Post Tee Post
16" 14"
2"
PR6 Series: Ball Post
16"14"
2"
1-1/2"PR71/L
2"PR72/L
1-1/2"PR71/E
2"PR72/E
1-1/2"PR71/T
2"PR72/T
2"PR71/C
2"PR72/C
End Post Corner Post Center Post Tee Post
PR7 Series: Square Post
2"PR82/L
2"PR82/E
2"PR82/T
2"PR82/C
End Post Corner Post Center Post Tee Post
16" 14"
2"
PR8 Series: 14" Glass Grip™ Post
2"PR92/L
2"PR92/E
2"PR92/T
2"PR92/C
End Post Corner Post Center Post Tee Post
18" 16"
2"
PR9 Series: 18" Glass Grip™ Post
511
2"
3"
591
2-1/2"
3-1/2"
530
4"
590
4"Sq.
531
2-1/2"
4"
591
3-1/4"
4"
510
3"
590
3-1/2"Sq.
1-1/2" Mounting Flanges 2" Mounting Flanges
Standard Optional Standard Optional
Mounting Solutions Booth dividers are pre-assembled with standard wallflanges. Narrow (cut) flanges may be substituted at noadditional charge.
RAILING COMPONENTS Booth Divider Posts: Factory AssembledIF
YO
U H
AV
E Q
UE
ST
ION
S O
R T
O P
LA
CE
AN
OR
DE
R C
AL
L U
S A
T 8
77
-AS
K-L
AV
I O
R6
61
-25
7-7
80
0
FA
X 6
61
-25
7-4
93
8
NEWITEM
NEWITEM
27
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Universal and Adjustable Railing Connectors RAILING COMPONENTS
D
35°
CP
822Adjustable Teeitem# tubing d cp822/2 2" 2" 3"
CP
D
821Ball Adjustable Saddleitem# tubing d cp821/1-1/2 1-1/2" 2" 3-5/8"821/2 2" 2" 2-7/8"
D
H
818CP*Coped Perpendicular Collaritem# tubing d h818CP 2" 2" 15/16"* No installation hardware supplied.Mounting hole has clearance for 1/4" fastener.
H1
D1
H2
D2
540/541Steel Flange and Canopyitem# tubing d-1 h-1540/1-1/2 1-1/2" 4" 1-1/2"540/2 2" 5" 1-1/2"540/3 3" 7" 1-1/2"item# tubing d-2 h-2541/1-1/2 1-1/2" 3-1/2" 12"541/2 2" 4-1/2" 12"
CP
D
820Adjustable Saddleitem# tubing d cp820/1-1/2 1-1/2" 1-1/2" 2-7/8"820/2 2" 2" 3-1/8"
805Adapter
Mounting Screw(not included)
1" DiameterTubing
7" StepHeight
730AFlush 147°Angle
822Adjustable Tee
818PerpendicularCollar
540/541Steel Flangeand Canopy
819 OuterPerpendicularCollar
806PicketConnector
600Flush
End Cap
732Flush Ell
11" StepWidth
730AFlush 147°Angle
D
HD2
H
D1
806*Picket Connectoritem# d1 d2 h806/1 1" 2" 1-3/4"*806 Picket Connector is usedsimilarly to 805 Adapter.
D
H
819*Outer Perpendicular Collaritem# tubing d h819/2 2" 2-13/16" 1-3/4"* No installation hardware supplied.Mounting hole has clearance for 1/4" fastener.
D
H
818*Perpendicular Collaritem# tubing d h817/1-1/2 1-1/2" 2" 1-1/2"818/1-1/2 1-1/2" 1-1/2" 1-15/16"818/2 2" 2" 2"* No installation hardware supplied.Mounting hole has clearance for 1/4" fastener.
Finishes:Polished, satin, chromeplated or Lido-Tone®
powder coating.See page 31 for finishes.
Lavi Industries offersuniversal connectorseither factoryassembled into posts,or as individualcomponents toaccommodate any railconfiguration.
Typical Rail Installation
805Adapter 2" to 1"item# d h805/1 1-15/16" 1-7/8"
12"3"
4"
542/SET & 543/SETCubical Flange andCanopyitem# tubingLR-02-543/SET 1-1/2"LR-02-542/SET 2"
Materials:
Solid Brass
Stainless Steel
Solid Brass andStainless Steel
Steel
28
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
RAILING COMPONENTS Tubing and Extrusions
Solid Brass Round Tubingproduct # a(in.) t(in.) lb./ft. mill ft.00-A20 1/4 .032 .081 1200-A30 3/8 .050 .190 1200-A49 1/2 .032 .174 1200-A50 1/2 .050 .257 1200-A51 1/2 .065 .328 1200-A60 5/8 .040 .328 1200-A70 3/4 .050 .398 1200-A100 1 .050 .541 1200-A101 1 .065 .706 12,1600-A103 1 .125 1.270 1200-A105 1-1/4 .050 .694 1200-A108 1-1/2 .032 .550 1200-A110 1-1/2 .050 .830 12,1600-A110ID 1-1/2 ID • • 1600-A111 1-1/2 .065 1.080 1600-A115 1-3/4 .050 .960 1200-A118 2 .040 .907 1200-A120 2 .050 1.080 12,1600-A120ID 2 ID • • 1600-A121 2 .065 1.460 1600-A123 2 .125 2.710 1200-A130 2-1/2 .050 1.410 1200-A131 2-1/2 .065 1.830 1600-A140 3 .050 1.710 1200-A141 3 .065 2.210 1600-A161 4 .065 2.960 1200-A163 4 .125 5.600 12
Tubing Splice Round Tubingproduct # a(in.) t(in.) length01-830/1 1 .050 6"01-830/1-1/2 1-1/2 .050 6"01-830/2 2 .050 6"01-830/2-1/2 2-1/2 .050 6"01-830/3 3 .050 6"
Polished Chrome Round Tubingproduct # a(in.) t(in.) lb./ft. mill ft.12-A50 1/2 .050 .240 1210-A100 1 .050 .500 1212-A105 1-1/4 .050 .630 1210-A106 1-5/16 .080 1.02 1210-A110 1-1/2 .050 .760 1212-A115 1-3/4 .050 .890 1210-A120 2 .050 1.030 1210-A130 2-1/2 .050 1.300 1210-A140 3 .050 1.570 12
Lido-Tone® Round Tubingproduct # a(in.) t(in.) lb./ft. mill ft.26-A100 1 .050 .500 1226-A110 1-1/2 .050 .760 1226-A120 2 .050 1.030 1226-A140 3 .050 1.570 12
Steel Sleeve for Round Tubingproduct # use with tubing lb./ft. mill ft.20-A100SL A100 .563 2020-A110SL A110 1.328 1220-A120SL A120 1.922 12
Stainless Steel Round Tubingproduct # a(in.) t(in.) lb./ft. mill ft.40-A60 5/8 .040 .328 1240-A100 1 .050 .510 2040-A110 1-1/2 .050 .770 2040-A111 1-1/2 .065 .990 2040-A120 2 .050 1.020 2040-A121 2 .065 1.300 2040-A130 2-1/2 .050 1.280 2040-A131 2-1/2 .065 1.690 2040-A140 3 .050 1.540 2040-A141 3 .065 2.040 20
Reeded Solid Brass Round Tubingproduct # diameter lb./ft. mill ft.00-A100R 1 .270 1200-A110R 1-1/2 .448 1200-A120R 2 .599 1200-A121R 2 .952 12
Spirated Solid Brass Round Tubingproduct # diameter lb./ft. mill ft.00-A60S 5/8 .231 1200-A100S 1 .246 1200-A110S 1-1/2 .571 1200-A120S 2 .765 12
Solid Brass Square Tubingproduct # a(in.) t(in.) lb./ft. mill ft.00-C06061 3/4 .050 .520 1200-C06062 3/4 .065 .660 1200-C08081 1 .050 .710 1200-C08082 1 .065 .920 1200-C12121 1-1/2 .050 1.070 1200-C12122 1-1/2 .065 1.380 1200-C16161 2 .050 1.440 1200-C16162 2 .065 1.860 12
Solid Brass Rodproduct # a(in.) lb./ft. mill ft.00-R02 1/4 .180 1200-R03 3/8 .407 1200-R04 1/2 .723 1200-R06 3/4 1.630 1200-R08 1 2.900 12
Solid Oak Full Roundproduct # a(in.) mill ft.30-A200 1 4, 1230-A210 1-1/2 1230-A220 2 8, 12
A T
A T
A T
A T
A T
A
A
Please use oneof the following prefixes for finishdesignation:
00 Brass, Polished01 Brass, Mill02 Brass, Clear Coat 04 Brass, Satin Clear Coat 10 Chrome, Over Steel12 Chrome, Over Brass26 Lido-Tone®, Over Steel06 Lido-Tone®, Over Brass30 Solid Oak40 Stainless Steel, Polished41 Stainless Steel, Mill44 Stainless Steel, Satin50 Aluminum
Example:00-A120 =2 inch,polished brass,.050 round tubing.
Note: Items highlighted arecommonly usedwith our Fittingsand Components.
TA
Solid Brass Channel Tubingproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.00-A121U 2 .75 .062 1.710 1600-A131U 2-1/2 .75 .065 2.260 1600-A142U 3 .75 .087 3.650 10
Stainless Steel Channel Tubingproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.40-A121U 2 .75 .062 1.950 1040-A132U 2-1/2 .75 .062 2.300 10, 1940-A142U 3 .75 .062 2.650 1040-A152U 3-1/2 .75 .062 3.000 10
Aluminum Baseproduct # a(in.) b(in.) c(in.) lb./ft. mill ft.50-A122B 3-1/2 2-1/4 .75 7.00 16
Solid Brass / Stainless Steel Claddingproduct # a(in.) c(in.) t(in.) mill ft.00-SRS420/3 3-1/2 .75 .050 840-SRS420/3 3-1/2 .75 .050 8
29
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Tubing and Extrusions RAILING COMPONENTS
A
B
B
A
1/2"
A
B
00-A120U1 00-A120U2 00-A120U3 00-A120U4
Solid Brass Barproduct # a(in.) b(in.) lb./ft. mill ft.00-B044 1/8 1/2 .230 1200-B054 1/8 5/8 .288 1200-B064 1/8 3/4 .346 1200-B084 1/8 1 .461 1200-B124 1/8 1-1/2 .691 1200-B164 1/8 2 .920 1200-B0202 1/4 1/4 .230 1200-B048 1/4 1/2 .461 1200-B068 1/4 3/4 .691 1200-B088 1/4 1 .920 1200-B128 1/4 1-1/2 1.380 1200-B168 1/4 2 1.840 1200-B0812 3/8 1 1.380 1200-B1612 3/8 2 2.760 1200-B0404 1/2 1/2 .920 1200-B0616 1/2 3/4 1.380 1200-B0816 1/2 1 1.840 1200-B1216 1/2 1-1/2 2.760 1200-B1616 1/2 2 3.680 12
Solid Brass Handrail Cap Extrusionproduct # a(in.) b(in.) lb./ft. mill ft.00-H1300 1-5/8 1-1/16 1.820 1600-H1600 2 1-5/16 2.280 1600-H1800 2-1/4 1-9/16 2.910 16For a full line of fittings for the H1600see page 6.
Recessed Solid Brass Tubingproduct # a(in.) b(in.) lb./ft. mill ft.00-A120U1 2 .31 1.26 1200-A120U2 2 .31 1.50 1200-A120U3 2 .31 1.50 1200-A120U4 2 .31 1.69 12All recessed channel tubing is .050 thick wall.
A
B
T
A
B
T
C
B
A
C
AT
Cap Rail System For Glass
Cap Rail components create the look of afloating handrail that easily adapts to bothtraditional and contemporary architecturalenvironments. Utilizing 1/2" thick temperedglass as a structural element, it providessafety and an unobstructed view. (see page 23)
30
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI
OR
66
1-2
57
-78
00
F
AX
66
1-2
57
-49
38
RAILING COMPONENTS Tubing and Extrusions
Solid Brass Framing Channelproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.U04063S 3/4 1/2 .062 .854 12
Aluminum Framing Channelproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.U04063S 3/4 1/2 .062 .270 12
Solid Brass Radius Bendproduct # dia. a(in.) radius(in.) angleA110/903 1-1/2 12 3 90°A110/453 1-1/2 12 3 135°A110/333 1-1/2 12 3 147°A110/906 1-1/2 12 6 90°A110/912 1-1/2 18 12 90°A120/903 2 12 3 90°A120/453 2 12 3 135°A120/333 2 12 3 147°A120/906 2 12 6 90°A120/912 2 18 12 90°
Stainless Steel Radius Bendproduct # dia. a(in.) radius(in.) angleA110/903 1-1/2 12 3 90°A110/453 1-1/2 12 3 135°A110/333 1-1/2 12 3 147°A110/906 1-1/2 12 6 90°A110/912 1-1/2 18 12 90°A120/903 2 12 3 90°A120/453 2 12 3 135°A120/333 2 12 3 147°A120/906 2 12 6 90°A120/912 2 18 12 90°
Solid Brass Channelproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.U03032 3/8 3/8 .062 .190 12U04032 1/2 3/8 .062 .224 12U04043 1/2 1/2 .094 .440 12U04083 3/4 1/2 .094 .600 12U05053 5/8 5/8 .094 .570 12U06063 3/4 3/4 .094 .690 12U08083 1 1 .110 1.200 12U04085 1/2 1 .125 .850 12
Solid Brass Angleproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.00-L04042 1/2 1/2 .065 .220 1200-L04043 1/2 1/2 .090 .312 1200-L04044 1/2 1/2 .125 .420 1200-L05052 5/8 5/8 .065 .280 1200-L06062 3/4 3/4 .065 .320 1200-L06064 3/4 3/4 .125 .630 1200-L08082 1 1 .065 .460 1200-L08084 1 1 .125 .890 1200-L12124 1-1/2 1-1/2 .125 1.220 12
Solid Brass Radius Back Channelproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.U04043C 1/2 1/2 .094 .464 12U05053C 5/8 5/8 .094 .700 12
Stainless Steel Radius Back Channelproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.UO4052C 5/8 1/2 .065 .350 12UO3052C 5/8 3/8 .065 .320 12
Solid Brass Radius Angleproduct # a(in.) b(in.) t(in.) lb./ft. mill ft.L08043C 3/4 1/2 .090 .510 12
AT
B
AT
B
AT
B
AT
B
00-B064Solid Brass Bar(order separately)
A
T
B
10-24 x 1-1/4Flat Head Machine Screw
5/16"
1/4" Panel
45°Miter
A
T
B
A Radius
A
A Radius
A
Notes and General Information:
• All solid brass flat bars, angles, rods, and channels arestocked in mill finish. Polished or chrome finishes areavailable. Please specify which surfaces are to be polished.
• All tubing and extrusions are sold in mill lengths. Cuttingservice is available, consult factory. Cut-offs will beshipped upon request.
Please use one ofthe following prefixes for finishdesignation:
00 Brass, Polished01 Brass, Mill02 Brass, Clear Coat 04 Brass, Satin Clear Coat 10 Chrome, Over Steel12 Chrome, Over Brass26 Lido-Tone®, Over Steel06 Lido-Tone®, Over Brass30 Solid Oak40 Stainless Steel, Polished41 Stainless Steel, Mill44 Stainless Steel, Satin50 Aluminum
Example:00-A120 =2 inch,polished brass,.050 round tubing.
Radius bendsare formed from.050 tubing.
Radius bendsare formed from.050 tubing.
31
IF Y
OU
HA
VE
QU
ES
TIO
NS
OR
TO
PL
AC
E A
N O
RD
ER
CA
LL
US
AT
87
7-A
SK
-LA
VI O
R6
61
-25
7-7
80
0 F
AX
66
1-2
57
-49
38
Finishes and Specifications RAILING COMPONENTS
WetBlack
HunterGreen Sandstone Sea
Green
UtilityGray
WheelWhite
PolishedBrass
SatinStainless
Steel
PolishedChrome
TorchRed
Blue
WrinkleBlack
WrinkleCharcoal
VerdiGris
PacificSand
SilverMatte
StatuaryBronze
Lido-Tone®
Textured Finishes
Lido-Tone®
Wet-Look Finishes
Metal Finishes
Materials:Lavi Industries is a manufacturer of premium materials forarchitectural interiors. Our products are designed to meet mostbuilding codes.
Solid brass and stainless steel are our choice materials for quality anddurability. We finish these metals in-house, to maintain rigid qualitycontrol.
WarrantyOur products carry a limited warranty against defects and failure.Please refer to our current Price List for warranty details.
Ordering Information
1. Tubing and ExtrusionsStandard full lengths of tubing and extrusions are 12' and 16'.At no extra charge, up to three cuts per full length may beordered. For orders less than a full length, the Buyer will becharged for the nearest standard full length (10' will becharged for 12'). Cut-offs will be shipped upon request.
2. Part Numbers and Finish DesignationWhen ordering, please use finish prefix as specified in theMaterials and Finishes chart below.
Example:10-301/2 = Polished Chrome Handrail Bracket,
for 2" Tubing.
3. DrawingsOur engineering department will be happy to assist you withyour specification requirements. Drawings of our products areavailable as needed. We can generate CAD drawings for yourspecific job, please consult us for details.
Materials and Finishes
maintenanceNot Applicable.
Lido-Lustre™, or other brass polish.
Damp rag, avoid ammonia base cleaners.
Not Applicable.
Maintenance free or Lido-Lustre™.
Maintenance free.
Damp rag, avoid ammonia base cleaners.
LB-00202Lido-Lustre™ Metal PolishCream should be used torepolish uncoated brass,aluminum and stainlesssteel. Available in 6.33 oz.tubes and 16 oz. jars.
Lido-Tone®
Lido-Tone® powder coating is highly durable, as well as decorative. Thistwo coat finish combines the outstanding chemical and mechanicalproperties of epoxies with a wide variety of colors and surface textures.When an exterior application is specified, a polyester-based coating willbe utilized. See Lido-Tone® standard color chart below. Custom colorsand finishes are available. Please consult with your Sales Executive.
finish material prefixMill Brass 01Polished Brass
Solid Brass00
Polished Brass, Clear Coat 02Satin Brass, Clear Coat 04
Mill Stainless Steel 41Polished #7 Stainless Steel Stainless Steel, Alloy 304 40Satin #4 Stainless Steel 44
Solid Brass (Fittings) 10Polished Chrome Solid Brass (Tubing) 12
Carbon Steel (Tubing) 10
Solid Brass 06Lido-Tone® Carbon Steel 26
Aluminum, Alloy 6061 56
Bright Anodized Aluminum, Alloy 6063 50
SatinBrass
PolishedStainless
Steel
© 2002 Lavi Industries. Products for the People and the Places They Go, Lido-Tone, Lido-Lustre and GlassGrip are registered trademarks ofLavi Industries. All other trademarks and trade names are the property of their respective owners.
All product designs © Lavi Industries. No part of this brochure may be reproduced or transmitted in any form or by any means, electronic ormechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission from Lavi Industries.
Note: Lavi Industries has a policy of continuous development and improvement to our product line. Specifications, data and dimensions maychange without notice. When these specifications or colors are critical, consult factory for current information.
11-02-15000
SALES AND CUSTOMER SERVICE, USA : (877) 275-5284INTERNATIONAL SALES : 001-661-257-7800
[email protected] EMAIL
Lavi Industries Corporate Headquarters27810 AVENUE HOPKINSVALENCIA, CA 91355800.624.6225661.257.7800661.257.4938 [email protected] EMAIL
Lavi Industries - New York2 GENEVA ROADBREWSTER, NY 10509877.213.LAVI (877.213.5284)845.278.1766845.278.1765 FAX