raven xt gsm quickstart

7/31/2019 Raven XT GSM QuickStart

1/34

Raven XT

Quick Start

20070914

Rev 3.0E


2/34

Rev 3.0E Jul.09 2

Activating your Raven XT on yourcellular provider Installing the SIM Configuring the APN Hardware Installation Indicator Lights Optional: Setting up a

DUN Connection

ThisQuickStartguideprovidesstepbystepdirectionsforactivatingyourRavenXTonyourcellularprovidersnetwork.

Tip: For additional configuration options, refer to the User Guide for

your Raven XT.

H

Installing the SIM

TheSubscriberIdentityModule(SIM)intheRavenXTisasmartcardthatsecurelystoresthekeyidentifyingacellularsubscriber.Generally,youwillonlyneedtoinstallaSIMonceinthelifeofthemodemanditmaybepreinstalledbyyourSierraWirelessRepresentative.

1. Before you start

IftheSIMwaspreinstalled,unlessyouneedtosetacustomAPN,activationofyourmodemiscomplete.SkiptotheRavenXTPlacementsectionand/ortotheDUNinstructions,ifyouneedDialUpNetworking.

Cellular Account Required

CellularAccountRequired Touseyourmodem,youneedtohaveaSIMwithanactiveaccountwithanEDGEGPRScellularprovider(suchasyourcellularprovider).

Software Required

AceManager GraphicalinterfaceforenteringmostATCommands.YoucandownloadAceManagerfromtheSierraWirelessAirLinkSolutionswebsite:http://www.sierrawireless.com/support/. Adefaultinstallationof

thisutilityisassumedlaterinthesedirections


3/34

Raven XT

3 20070914

Hardware Required

Ethernetcableorserialcable AnEthernetcableorstraightthroughserialcable.

Serialcable Astraightthroughserialcable.Note: Until you install a driver for the USB port, you cannot use your

USB port to configure the modem.

Poweradapterandapowersource Youwillneedapowersupplyandpowersourceforthemodem.

PCorlaptop Toconfigurethemodem,youwillneedacomputerwithanavailableserialport.

Tools Required

SmallPhillipsscrewdriver ThePhillipsscrewdriveristheonewhichisalsocalledaplus(+)orXscrewdriver.

1. Removing the faceplate

a. UnplugtheRavenXTpowerandallcables.

b. Usingasmallphillipsheadscrewdriver,removethescrewsonthefront.

c. Setthefaceplateaside.

2. Remove the SIM from the card

a. CarefullyremovetheSIMcardfromthecardyoureceivedfromyourcellularprovider.

Figure 0-1: Sample of the SIM card

3. Insert the SIM

a. GentlypresstheSIMcardtosecureinplace.


4/34

Rev 3.0E Jul.09 4

Note: The card and SIM may be a different color than these

examples.

Figure 0-2: Insert SIM in to the modem

Tip: The top of the card faces the bottom of the modem.

4. Finishing the SIM installation

Whenthefaceplateisreplacedandsecured,theinstallationof

theSIM

is

complete.

Configuring the APN

TheAPN(AccessPointName)isthewayyourmodemknowshowitwillbecommunicatingwiththenetwork.TheAPNallowscustomIPaddressingandtailoringyourcompanyswirelessIPsolutiontomeetthesecurityandIPaddressingrequirementsofyourapplications.

Note: Most accounts use the default addressing solution of Private or

Public IP addresses supplied by the Internet and Proxy APNs. Only ifyou have a Static or Custom IP address should you need to configure

a custom APNs.

ThedefaultAPNisInternet.IfyouneedadifferentAPN,useAceManagertoconfigureit.

1. Start AceManager

Start>AllPrograms>AirLinkCommunications>AceManager3G>AceManager3G


5/34

Raven XT

5 20070914

Figure 0-3: AceManager

2. Connect to the Modem

a. ClicktheConnectbutton.

b. SelectPPP.

c. Entertheconnectioninformation.

ForPPP,selecttheCOMporttowhichthemodemisconnected.

d. Enterthepassword.Thedefaultpasswordwillbeenteredforyou.

e. SelectOK.

3. Enter the APN

a. SelectEDGE/HSDPA/HSUPAfromthemenuontheleft

sideofAceManager(underGroups)


6/34

Rev 3.0E Jul.09 6

Figure 0-4: AceManager : EDGE/HSDPA

b. TypeyourAPNintheNewValuefieldof*NETAPN.

Figure 0-5: AceManager : EDGE/HSDPA - *NETAPN

c. SelectPPP.

d. Entertheconnectioninformation.

ForPPP,selecttheCOMporttowhichthemodemisconnected.

e. Enterthepassword.Thedefaultpasswordwillbeenteredforyou.

f. SelectOK.

Optional:IfyouneedtoconfigureyourmodemforacustomAPN,afterenteringtheAPN,thereisadditionalinformationyouwillneedtoenter.

1. SelectMisc

from

the

menu

on

the

left

side

under

theCommongroup.

Figure 0-6: AceManager : Misc


7/34

Raven XT

7 20070914

2. EntertheNAIintothenewvaluefieldfor*NETUIDandenteryournetworkpasswordintothenewvaluefieldfor*NETPW.

Figure 0-7: AceManager : Misc - *NETUID, *NETPW

4. Write the Settings to the Raven XT

a. ClicktheWritebuttononthetoolbarofAceManager.

b. WaitforthemessageWriteSuccessfultoappearinthestatusbar.

Figure 0-8: AceManager : Write

c. ResettheRavenXT.


8/34

Rev 3.0E Jul.09 8

Hardware Installation

Note: During installation, please

be sure that the cables are

secure but do not bear anyadditional weight that could

loosen the connector from the

unit.

YourRavenXTshouldbemountedinapositionthatallowseasyaccessforthecablessotheyarenotbent,constricted,in

closeproximity

to

high

amperage,

or

exposed

to

extreme

temperatures.TheLEDsonthefrontpanelshouldbevisibleforeaseofoperationalverification.Youshouldensurethatthereisadequateairflowaroundthemodembutthatitiskeptfreefromdirectexposuretotheelements,suchassun,rain,dust,etc.

Caution: The Raven XT is in a hardened case and designed for use

in industrial and extreme environments. However, unless you are

using cables expressly designed for such environments, they can fail

if exposed to the same conditions the Raven XT can withstand.

Figure 0-9: Raven XT Connectors

Cellular

Note: This device is not

intended for use within close

proximity of the human body.

Antenna installation should

provide for at least a 20 CM

separation from the operator.

Antennasselectedshouldnotexceedamaximumgainof5dBiunderstandardinstallationconfiguration.Inmorecomplexinstallations(suchasthoserequiringlonglengthsofcableand/ormultipleconnections),itsimperativethattheinstallerfollowmaximumdBigainguidelinesinaccordancewiththeradiocommunicationsregulationsoftheFederalCommunicationsCommission(FCC),IndustryCanada, oryourcountrysregulatorybody(ifusedoutsidetheUS).

YourRavenXTwillworkwithmostcellularantennaswithaSMAconnector.ConnecttheprimaryantennaorprimaryRFcabledirectlytotheantennaconnectoronthebackoftheRavenXT.

Cellular

Serial Power

USB


9/34

Raven XT

9 20070914

Tip: When using a cable to an antenna placed away from the

modem, minimize the length of your cable. All gain from a more

advantageous antenna placement can be lost with a long cable to the

modem.

Power

ThisI/Oporthandlesexternalinputandoutput events.Anexternaldevicecansenddigitalinputtothemodem,throughthedigitalI/Oport.

Figure 0-10: Digital 1/0 Port

YourRavenXTcanbeusedwitheitherDCorAC,withtheappropriatepoweradapter.DCcablesandACadaptersareavailableasoptionalaccessoriesinadditiontotheoneincludedwithyourRavenXT.

Note: When using a DC power

source (such as a solar cell),

Sierra Wireless recommends

placing a fuse (1-2 Amp) on the

line close to the power source to

protect your power source from

possible surges due to shorts or

other line issues.

TheDCpowercablepositiveleadshouldbeconnectedtothebatteryorpowersourcepositiveterminal.Thepowercablenegativeleadshouldbeconnectedtothebatteryorpowersourcenegativeterminal.

Tip: The DC power cable has a white wire lead in addition to the

power positive and negative. This is for a feature not present in the

Raven line modems. In the Raven XT, the white wire lead has no

function and can be ignored.

Warning: Explosion Hazard - Do not disconnect

equipment unless power has been switched off or

the area is known to be non-hazardous.


10/34

Rev 3.0E Jul.09 10

Connecting to a Computer or other

Device

Figure 0-11: USB

YourRavenXTsfullspeed(12Mbit)USB2.0portcanbeconnecteddirectlytomostcomputersorotherdevicesusingastandardfullspeedUSB2.0cable.Ifthecomputerordeviceyouareconnectingorthecableisnotratedforfullspeed,themodemwillcommunicateatareducedspeedtomatch.TheRavenXTfunctionsasadevice,notahost.

Whenitisconnectedtoacomputer,theUSBportshouldbeseenasaCOMportorEthernetportaftertheapplicabledriverisinstalled.

TheRavenXThasastandardminiBconnector.

Warning: The USB port can only be used in a non-

hazardous environment.

Indicator Lights

WhenyourRavenXTisconnectedtopowerandanantenna,thereisaspecificpatterntothelightstoindicateitsoperationmode.

Figure 0-12: Raven XT Indicator lights


11/34

Raven XT

11 20070914

Network IndicatesasuccessfulconnectiontothecellularnetworkwithanIPaddressgivenandachannelacquired.

Signal Lightshowsthestrengthofthesignalandmaybenearlysolid(strongsignal)orflashing(weakersignal).Aslowflashindicatesaveryweaksignal.

Activity LightswillflashasdataistransferredtoandfromthePinPointmodemontheremotenetwork.

Power IndicatesthepoweradapterisconnectedandthereispowergettingtotheRavenXT.

TheResetbutton(ontheleftsideoftheRavenXT)hastwofunctions.Ifitisquicklydepressedandreleased,themodemwillsimplypowercycletheinternalhardware.If,however,theresetisdepressedandheldforseveralseconds(count10slowly,andwaitforthepowerlightto

gooffafterthelightpatternstops),theALEOSconfigurationsettingswillreturntothefactorydefaults.

Light Patterns

TheLEDsonthefrontofthemodemwillrespondindifferentpatternstoindicatemodemstates.

Normal EachLED,mentionedabove,islitasapplicable. Startup TheLEDswillcyclefromlefttoright. PassThrumode NetworkandSignalLEDswillblink intandem.TheActivityLEDwillblinkwhentransmittingor

receivingdata.

SOS TheNetworkLEDblinks.

RSSI LED Ranges

RSSI/Signal LED Status Ranges of RSSI (dBm)

On Solid Equal to or stronger than -69

Fast Blink -70 to -79

Normal blink -80 to -89

Slow Blink -90 to -99

Extinguished Equal to or weaker than -100

Srvc(service) IndicateswhentheconnectionisEDGE.UnlitindicatesGPRS.

Caution: If you reset the modem configuration using the reset button,

you may to reconfigure your APN.


12/34

Rev 3.0E Jul.09 12

ConfigurationReset TheLEDswillcyclelefttorightandthenrighttoleft4times.

AuthenticationFailure TheNetwork,Signal,andActivityLEDsblinkevery2seconds.

DataRetry TheNetwork,Signal,andActivityLEDsblinkevery

3seconds.

Optional: Setting up a DUN

Connection

DialupNetworking(DUN)allowsacomputerorotherdevicetousetheserialportorUSBvirtualserialportonyourRavenXTtoconnecttotheInternetorprivatenetworkusingPPPjustlikeananalogmodemusingastandardphoneline.

Caution: To install any driver on your computer, you may need to be

logged in as Administrator or have Administrator privileges for your

login.

MicrosoftWindowsXPisusedintheexamplesbelow.ThemodemdriverinstallationandDUNsetupandconfigurationissimilarinMicrosoftWindowsproducts.ExamplesarenotprovidedhereforinstallingthedriverorconfiguringDUNforanyotheroperatingsystem.\

StandardinstallationsofMicrosoftWindowsXPand2000

include

a

generic

modem

driver

which

will

work

with

your

RavenXT.

1. Connect the Raven XT.

a. ConnectthemodemtothecomputerwithaDB9cable

ortheUSBportinserialmode.

b. PlugintheACadapter,connecttheantenna(s)andpoweronthemodem.

2. Install the driver.

a. SelectStart>Control

Panel

>Phone

and

Modem

Options

(inClassicView).


13/34

Raven XT

13 20070914

Figure 0-13: Phone and Modem Options

b. SelecttheModemstab.

Figure 0-14: Phone and Modem Options: Modems

c. SelectAdd.


14/34

Rev 3.0E Jul.09 14

Figure 0-15: Add Hardware Wizard

d. CheckDontdetectmymodem;Iwillselectitfromalist.

e. SelectNext.

Figure 0-16: Add Hardware Wizard: Install New Modem

f. Select(StandardModemTypes)fromtheManufacturerscolumn.

g. SelectStandard33600

bps

ModemfromtheModels

column.


15/34

Raven XT

15 20070914

Tip: If you have the speed for your modem configured as something

other than the default, use the Standard Modem that matches the

speed you configured.

h. SelectNext.

Figure 0-17: Add Hardware Wizard: Select Ports

i. CheckSelectedPorts.

j. SelecttheCOMportthemodemisconnectedto(commonlyCOM1).

k. SelectNext.

Figure 0-18: Add Hardware Wizard: Finish

l. Oncethemodemdriverisinstalled,selectFinish.


16/34

Rev 3.0E Jul.09 16

3. Configure the driver.

WhenyoureturntothePhoneandModemOptionswindow,youshouldseethenewlyinstalledmodemattachedtothecorrectCOMport.

Figure 0-19: Phone and Modem Options: Modems

a. HighlightthemodemandselectProperties.

Figure 0-20: Modem Properties


17/34

Raven XT

17 20070914

b. SelecttheModemtab.

Figure 0-21: Modem Properties: Modem

c. MaximumPortSpeedshouldbesetto115200(default).

d. SelectOKtoexit.

e. SelectOKagaintoexitoutofthePhoneandModemOptions.

Creating a Dial-Up Networking (PPP)

Connection

Onceyouhavethedriverforthemodeminstalledonyourcomputer,youcansetupandconfigureDialUpNetworking(DUN)tousethemodemasyourconnectiontotheInternetusingPPP.

Note: No other device or program can be using the same COM port

(serial port) configured for the modem driver.

Caution: If you have an existing LAN connection, installing DUN forthe modem may interfere with the LAN connection. It's recommended

to disconnect your LAN connection before using a PPP connection

with your Raven XT.


18/34

Rev 3.0E Jul.09 18

OncetheDUNconnectionisinitiated,bydefault,itwilltakeoverasthedefaultroutefornetworkcommunicationandspecificallyforInternetaccess.Ifyouwantthetwoconnectionstocoexist,youwillneedtodeselectUsedefaultgatewayonremotenetwork(describedlater)andusetheroutecommandinWindowstosetuproutingthroughthemodemproperly.Thisguidedoesnotprovideinformationontheroutecommand.Youmayneedtoconsultwithyournetworkadministratortoproperlyconfigurerouting.

1. Create a new network connection.

a. SelectStart>ConnectTo>ShowAllConnectionstoopen

theNetworkConnectionswindow.

Figure 0-22: Windows : Start menu

b. SelectCreateaNew

ConnectionunderNetworkTasksin

themenuareaontheleft.


19/34

Raven XT

19 20070914

Figure 0-23: Create New Connection

c. SelectNexttostartinstallingandconfiguringtheDUNconnection.

Figure 0-24: New Connection Wizard

d. SelectConnecttotheInternet.

e. SelectNext.


20/34

Rev 3.0E Jul.09 20

Figure 0-25: New Connection: Type

f. SelectSetupmyconnectionmanually.

g. SelectNext.

Figure 0-26: New Connection: How do you want to connect?

h. SelectConnectusingadialupmodem.

i. SelectNext.

Figure 0-27: New Connection: Connect using...

j. Optional:Ifyouhavemultiplemodemsinstalledonyourcomputer,youmaybepromptedtoselectthemodemtobeused.Ifyouonlyhaveonemodeminstalled,thisoptionwillbeomitted.

k. CheckStandard33600bpsModem.

l. SelectNext.


21/34


22/34

Rev 3.0E Jul.09 22

Figure 0-31: New Connection: Permissions

GenerallythemodemtakescareoftheAccountInformation,UsernameandPassword,fortheconnection,soyoucanleavethefieldsblank(unlessotherwiseinstructedbySupport).

s. Ifyouwanttoallowotherstousethesameloginforthemodem,selectUsethisaccountnameandpassword....

t. SelectNext.

Figure 0-32: New Connection: Connection Information

Caution: If you have a LAN connection to the Internet and select

Make this the default Internet Connection for the DUN configuration,you will not be able to use the LAN to connect to the Internet and may

also affect the network connection on your computer to the rest of the

LAN. Select this option ONLY if the Raven XT will be your sole

network connection.

u. IfyouwanttoaddashortcutforthisDUNconnectiontoyourdesktop,checkAddashortcut.

v. SelectFinishtoexittheNetworkConnectionWizard.


23/34

Raven XT

23 20070914

Figure 0-33: New Connection: Finish

2. Configure the DUN connection

AfteryoucompletetheNewConnectionWizard,thereareafewmorethingsyouwillwanttoconfigureintheconnection.

a. SelectProperties.

Figure 0-34: DUN Connection

b. UncheckUsedialingrules.


24/34

Rev 3.0E Jul.09 24

c. CheckShowicon...whenconnected.

d. SelectConfigure,belowtheConnectusingline.

Figure 0-35: DUN Properties

e. Select115200astheMaximumspeed.

f. CheckEnablehardwareflowcontrol.

g. Donotcheckanyotheroption.

h. SelectOK.


25/34

Raven XT

25 20070914

Figure 0-36: Modem Configuration

i. Backatthemainpropertiesscreen,selecttheNetworkingtab.

Figure 0-37: Networking

j. SelectSettings.

k. RemovethechecksfromallthreePPPsettings.

l. SelectOK.


26/34

Rev 3.0E Jul.09 26

Figure 0-38: PPP Settings

m. Select(highlight)InternetProtocol(TCP/IP)andthenselectProperties.

Tip: For most configurations, you will be obtaining the IP address and

the DNS server address automatically.

n. SelectAdvanced.

Figure 0-39: TCP/IP Properties

o. UncheckUseIPheadercompression.

p. CheckUsedefaultgatewayonremotenetwork.

q. SelectOK.


27/34

Raven XT

27 20070914

Figure 0-40: Advanced TCP/IP

Tip: You may want to check the Options tab and change the settings

for applications you might be using. The default options are generally

applicable for most uses.

Caution: Unless specifically directed to do so by Support or your

network administrator, you do not need to make any changes to the

options on the Security tab.

r. SelectOKuntilyoureturntotheConnectwindow.

Connecting to the Internet Using DUN

TherearetwomethodsyoucanusetoconnectwithRavenXTtotheInternetusingDUN,AceViewandtheWindowsDUNconnectiondirectly.

AceView

AceViewisasmallutilitywhichcanmaintainyourDUNconnectionandmonitortheconnectionofyourRavenXTtoProvider.IfyouhavenotalreadyinstalledAceViewyoucanobtainthemostrecentversionfromtheSierraWirelessAirLinkwebsite.

Note: The direct DUN

connection features of AceView

are not available in Windows 98

or Windows NT.

ThisguideassumesyouhaveadefaultinstallationofAceView.

1. Start AceView.

Start

>

All

Programs

>

AirLink

Communications

>

AceView


28/34

Rev 3.0E Jul.09 28

2. Enable the Connection.

Figure 0-41: AceView: Menu

a. RightclickontheAceViewwindowtoopenthemenu.

b. SelectConnectionSettings.

Figure 0-42: AceView: Connection Settings

c. SelectAutoStartintheDUNsection.

d. SelectMaintainPersistentConnection.

Whenchecked,AceViewwillcontinuallychecktheDUNconnectiontoensureitisnotdown.Ifso,AceViewwillattempttoconnectagain.

Tip: When using the DUN connection, make sure the IP Address is

set to the local IP address of the modem, 192.168.13.31 by default.

e. SelectOK.

f. OK.

Windows DUN

YoucandirectlyusetheDialuplinkfortheDUNconnection.


29/34

Raven XT

29 20070914

1. Start the DUN session.

Start>ConnectTo>SierraWirelessAirLinkModem

Ifyounamedtheconnectiondifferently,usethenameofthePPPconnectionyoumadeearlier.

Figure 0-43: DUN Connection

Tip: Generally you will not need to enter a Username or Password. If

you do need to enter either, you can enter these parameters

beforehand using *NETUID and *NETPW.

2. Select Dial to connect to the modem

and the cellular network.

Note: The speed shown in the

connection is the speed between

the modem and your computer, it

is not the speed of the modems

connection to Provider or the

Internet.

Whenyoureconnected,aniconshouldappearinthesystemtrayshowingtheconnectionstatus.

Figure 0-44: Connection indicator


30/34

Rev 3.0E Jul.09 30

Caution: For DUN connections on a Windows Mobility or other non-

personal computer, the DNS settings may not be configured with the

DUN connection. You may need to go into the network settings and

add DNS servers manually.


31/34

Rev 3.0E Jul.09 i

Important Notice Duetothenatureofwirelesscommunications,transmissionandreceptionofdatacanneverbeguaranteed.Datamaybedelayed,corrupted(i.e.,haveerrors)orbetotallylost.AlthoughsignificantdelaysorlossesofdataarerarewhenwirelessdevicessuchastheSierraWirelessAirLinkRavenXT

are

used

in

a

normal

manner

with

a

well

constructed

network,

theSierraWirelessAirLinkRavenXTshouldnotbeusedinsituationswherefailuretotransmitorreceivedatacouldresultindamageofanykindtotheuseroranyotherparty,including

butnotlimitedtopersonalinjury,death,orlossofproperty.SierraWirelessacceptsnoresponsibilityfordamagesofanykindresultingfromdelaysorerrorsindatatransmittedorreceivedusingtheSierraWirelessAirLinkRavenXT,orforfailureoftheSierraWirelessAirLinkRavenXTtotransmitorreceivesuchdata.

Safety and Hazards DonotoperatetheSierraWirelessAirLinkRavenXTinareas

whereblasting

is

in

progress,

where

explosive

atmospheres

maybepresent,nearmedicalequipment,nearlifesupportequipment,oranyequipmentwhichmaybesusceptibletoanyformofradiointerference.Insuchareas,theSierraWirelessAirLinkRavenXTMUSTBEPOWEREDOFF.TheSierraWirelessAirLinkRavenXTcantransmitsignalsthatcouldinterferewiththisequipment.

DonotoperatetheSierraWirelessAirLinkRavenXTinanyaircraft,whethertheaircraftisonthegroundorinflight.Inaircraft,theSierraWirelessAirLinkRavenXTMUSTBEPOWEREDOFF.Whenoperating,theSierraWirelessAirLinkRavenXTcantransmitsignalsthatcouldinterferewithvariousonboardsystems.

Note: Some airlines may permit the use of cellular phones while the

aircraft is on the ground and the door is open. Sierra Wireless AirLink

Raven XT may be used at this time.

ThedriveroroperatorofanyvehicleshouldnotoperatetheSierraWirelessAirLinkRavenXTwhileincontrolofavehicle.Doingsowilldetractfromthedriveroroperatorscontrolandoperationofthatvehicle.Insomestatesandprovinces,operatingsuchcommunicationsdeviceswhileincontrolofavehicleisanoffence.

Limitation of

Liability

TheinformationinthismanualissubjecttochangewithoutnoticeanddoesnotrepresentacommitmentonthepartofSierraWireless.SIERRAWIRELESSANDITSAFFILIATESSPECIFICALLYDISCLAIMLIABILITYFORANYANDALL


32/34

Rev 3.0E Jul.09 ii

DIRECT,INDIRECT,SPECIAL,GENERAL,INCIDENTAL,CONSEQUENTIAL,PUNITIVEOREXEMPLARYDAMAGESINCLUDING,BUTNOTLIMITEDTO,LOSSOFPROFITSORREVENUEORANTICIPATEDPROFITSORREVENUEARISINGOUTOFTHEUSEORINABILITYTOUSEANYSIERRAWIRELESSPRODUCT,EVENIFSIERRAWIRELESSAND/ORITSAFFILIATESHASBEENADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGESORTHEYAREFORESEEABLEORFORCLAIMSBYANYTHIRDPARTY.

Notwithstandingtheforegoing,innoeventshallSierraWirelessand/oritsaffiliatesaggregateliabilityarisingunderorinconnectionwiththeSierraWirelessproduct,regardlessofthenumberofevents,occurrences,orclaimsgivingrisetoliability,beinexcessofthepricepaidbythepurchaserfortheSierraWirelessproduct.

Patents Portionsofthisproductmaybecoveredbysomeorallofthe

followingUS

patents:

5,515,013 5,629,960 5,845,216 5,847,553 5,878,2345,890,057 5,929,815 6,169,884 6,191,741 6,199,1686,339,405 6,359,591 6,400,336 6,516,204 6,561,8516,643,501 6,653,979 6,697,030 6,785,830 6,845,2496,847,830 6,876,697 6,879,585 6,886,049 6,968,1716,985,757 7,023,878 7,053,843 7,106,569 7,145,2677,200,512 D442,170 D459,303

andotherpatentspending.

LicensedunderthefollowingNortelNetworksLimitedpatents:

UnitedStates

patent

numbers:

5128925,

5398247

Francepatentnumbers:2665993,2653959,2659812,2745091

Copyright 2009SierraWireless.Allrightsreserved.

Trademarks AirCardandHeartoftheWirelessMachineareregisteredtrademarksofSierraWireless.WatcherisatrademarkofSierraWireless,registeredintheEuropeanCommunity.AirLinkandAceWarearetrademarksofSierraWireless.SierraWireless,theSierraWirelesslogo,theredwavedesign,andtheredtippedantennaaretrademarksofSierraWireless.

WindowsisaregisteredtrademarkofMicrosoftCorporation.

Othertrademarksarethepropertyoftherespectiveowners.


33/34

Rev 3.0E Jul.09 iii

Contact

Information

Consultourwebsiteforuptodateproductdescriptions,documentation,applicationnotes,firmwareupgrades,troubleshootingtips,andpressreleases:

www.sierrawireless.com

Revision History

Support Desk: Phone: 1-877-231-1144

Hours: 5:00 AM to 5:00 PM Pacific Time,

Monday to Friday, except US HolidaysE-mail: [email protected]

Sales Desk: Phone: 1-510-624-42001-604-232-1488

Hours: 8:00 AM to 5:00 PM Pacific Time

E-mail: [email protected]

Post: Sierra Wireless America39677 Eureka DriveNewark, CAUSA 94560

Sierra Wireless

13811 Wireless WayRichmond, BCCanada V6V 3A4

Fax: 1-510-624-42991-604-231-1109

Web: www.sierrawireless.com

Revision

number

Release

date

Changes

1.x 2003-2005 AirLink Communications documentation - CDPD, CDMA, and GPRS.

2.x Q2: 2005-Q2:2007

AirLink Communications documentation - CDMA, EV-DO, EDGE, andHSUPA/HSDPA.

3.0 Q2: 2008 Converted documentation from AirLink Communications documentationformat into Sierra Wireless documentation format. Phase II of the conversioncompleted.

Raven modem line documentation is revised.
http://sierrawireless.com/mailto:[email protected]:[email protected]://sierrawireless.com/mailto:[email protected]://sierrawireless.com/http://sierrawireless.com/mailto:[email protected]


34/34

raven xt gsm quickstart

Documents