rcq3-868 radio ontrolli - multichannels radio modem · 2.0 multichannels radio modem functionality...
TRANSCRIPT
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 1 / 21
Radio Wireless Modules
ontrolli
www.radiocontrolli.com
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
RCQ3-868 based on RadioControlli RC-CC1310-868 component.
The functionality of the device RCQ3-868 are the following :
- Multichannels Radio Modem The modem operates in the ISM 868 MHz band. The RF modem is very simple to use and provides a wireless RS232 link with a RF data rate of up to 100 kbps. The transceivers have the functions of a complete radio modem and simply require CMOS/TTL data at the transmit input and the corresponding transceiver(s) output the same data. Preamble and CRC are automatically generated and added to the RF transmission. The RCQ3-868 can use any channel in 100 (200) KHz step. Possible applications include one-to-one and multi-node wireless links in applications including security, EPOS, wireless sensor network, industrial process monitoring and computer networking.
- Wireless Switch It’s an 8 channels wireless switch module with pairing function, it provides maximum 8 channel signal input and maximum 8 channel control output (4 bistable channels and 4 monostable channels). - Wireless Controller It’s an 4 channels wireless controller module with pairing function, it’s possible to control and verify the logic state (open or close) of the Remote Module.
- Wireless Actuator Wireless actuator for home automation, it’s possible use 1 unit as Transmitter (controllable via RS232 serial interface) and by one or more RX units with the possibility to switch 4 bistable channels and 4 monostable channels for every RX units.
Feature :
- Radio Modems Application Inside- Low consumption technology- RF Data Rate to 100Kbps- RF Channel Selectable - Serial Data Interface with Handshake- Host Data Rate up to 115200 Baud- Very Stable Operating Frequency
Operating Mode :
- One to One- One to Many- Broadcast- Many to One
- Wireless security systems
- Home and building automation
- Automatic Measure Reading
- Industrial Control and Monitoring
- Wireless Sensor Network
- EPOS Terminal
Applications :
10
11
12
19
28
17
26
14
23
21
30
33
35
9
16
25
13
20
29
32
18
27
15
24
22
31
34
36
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 2 / 21www.radiocontrolli.com
Reference Schematics
Pin out device
Mechanical dimensions
GND1
Not Used2
K5
14
RX3
K2
15
TX4
T2
16
RL55
P1
17
RL66
K3
18
RL47
Not
Use
d19
RL38
No
t U
se
d20
GND9
T
321
VDD10
T4
22
D5R11
K4
23
D5V12
K124
T113
0125
RTS26
CTS27
RESET RESET N28
S429
RL8
RL131
RL732
RL233
S3
S235
S1
RCQ3-868
VDD
C1
106
30
34
36
Pads Name Description
1
7
6
8
GND Ground
2
3
NU Not Used
RX
4 TX
5 RL5
RL6
RL4
RL3
GND
VDD
D5R
D5V
T1
K5
K2
T2
P1
K3
NU
NU
T3
T4
K4
K1
01
RTS
CTS
RESET
S4
RL8
RL1
RL7
RL2
S3
S2
S1
UART RX
UART TX
Bistable Output RL5
Bistable Output RL6
Monostable Output RL4
Monostable Output RL3
Ground
Power 3Volt
Digital Output Led Info RED
Digital Output Led Info GREEN
Remote Request State S1
Remote Request State S2
Remote Request State S3
Remote Request State S4
Shift Switch for channels 5-8
Switch for channels 2
Switch for channels 3
Switch for channels 4
Switch for channels 1
Switch Test Mode
Not Used
Not Used
Bistable Output RL8
Bistable Output RL7
Monostable Output RL1
Monostable Output RL2
Led Test Mode
UART RTS
UART CTS
RESET (Active low,No internal pull up)
Input S4
Input S3
Input S2
Input S1
1
2
3
4
5
6
7
8
9
10
11
12
24
25
26
27
28
29
30
31
32
33
34
35
36
13
14 15 16
17
18
19
20
21
22
23
22mm
1.27mm
15mm
Thickness = 2,5mm
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 3 / 21www.radiocontrolli.com
Antenna Connection
HiRose connector
0 ohm chip selector
Antenna hole connector
Antenna pad connector if you want connect this device to a pcb antenna.
Connection using hole (868MHz Elicoidal Antenna)
15.24mm
23mm
1.27
1.27
1.40
1.60
0.70
0.70
1.77
11.43
16mm
Recommended PCB Layout
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 4 / 21www.radiocontrolli.com
1.0 Technical Specifications
2.0 Multichannels Radio Modem Functionality
The RCQ3-868 Radio Modem has applications in many areas where reliable half duplex communications are required over ranges up to 200 meters (with the maximum RF Power is possible to reach up to 400-500meters).The crystal controlled narrow band design, in the embedded RCQ3-868 device, gives reliable performance within the 868 MHz band.The addressing protocol employed enables many different configurations such including:
one-to-one operation: for point to point data communication;
broadcast operation: where a single master address many RCQ3-868 modules concurrently (using many RCQ3-868 modules set to the same address);
one-to-many: a network consisting a master and many slaves (the receivers all have the same address)
many-to-one: where the transmitters all send to a single receiver address
Since each RCQ3-868 can contain a unique address, multiple RCQ3-868 network can co-exist in the same area.
MIN TYP MAX UNIT
Supply Voltage
Supply Current RX mode
Supply Current Standby Mode
VDC
mA
Mbit/s
31.8 3.8
5.5
0.7
Characteristics MIN TYP MAX UNIT
3 3.
0,01 4
Technical Characteristics
RF Power Output 50ohm (*) +14-10
Data Rate
Operative Temperature -30 +75 °C
µA
dBm
434/868/915 Operative Frequency MHz
RF Sensitivity 50kbps dBm
Frequency error ± 10 ppm
(*) Programmable parameter.
Supply Current TX mode ---> +10dBm
Supply Current TX mode ---> +14dBm
13.4
23.5
mA
mA
Supply Current Shut Down Mode 185 nA
- 110
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 5 / 21www.radiocontrolli.com
2.1 Configuration Mode
The in the following mode:RF Channel is calculated
FREQUENCY = 860 + (ASCII code / 10 ) + (Rest division / 10)for example to character «R» (HEX 52) corresponds to the frequency 868.2 Mhz because :achieve the frequency = 868.9MHz the procedure is the following :«R» Ascii Code = 82 ---> Frequency = 860 + int(82/10) + rest division (82/10) = 860+8+0.2 = 868.2
The in the following mode : Power value is calculated
Power = Ascii code - 48For example to the character «7» (HEX 37) correspond the value 7dBm because :«7» Ascii code = 55 -----> Power = 55 - 48 = 7
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
0 dBm
6
8
:
<
>
30
32
34
36
38
3A
3C
3E
1E 30byte
2 dBm
4 dBm
6 dBm
8 dBm
10 dBm
12 dBm
14 dBm
9 RFTX Power
0
2
4
10
11
TX DATA PACKET SIZE
TX DATA PACKET SIZE 1E 30byte
Byte Name Description
0
6
5
7
MSB
1
2
3
4
868.0 MHz
868.2 MHz
Name
~
P
X
Z
\
^
<
b
d
Name
7E
50
52
54
56
58
5A
5C
5E
60
62
64
Text HEX
RemoteAddress
LSB
~ ~ ~
7E
7E
7E
LocalAddress
LSB
MSB ~ ~ ~ ~
7E
7E
7E
7E
868.4 MHz
868.6 MHz
868.8 MHz
869.0 MHz
869.2 MHz
869.4 MHz
869.6 MHz
869.8 MHz
8 RFChannels
R
T
V
870.0 MHz
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 7 / 21www.radiocontrolli.com
2.2 Example of Configuration
Software used : Hercules SETUP utility (free use)
Open the serial port with this parameters
Set the Hercules software to receivehexadecimal character ( press the right mouse button and :- In the Special Chars menù choise HEX- Choice HEX Enable
Push this button, in this modethe string “?C” is transmitted (request of configuration)
The module responds by sending the default configuration parameters7E 7E 7E 7E 7E 7E 7E 7E 50 3A 1E 1E
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 7 / 21www.radiocontrolli.com
Push this button, in this modewe sent the new Configuration String7E 7E 7E 7E 70 70 70 70 56 3A (hexadecimal string)We have changed the parameters inred :
Destination address70 70 70 70
Frequency = 868.6MHz56
The module answer confirming the new configurazion :7E 7E 7E 7E 70 70 70 70 56 3A
2.3 Example of Operation Mode (One to One)
This example is performed according to the following schematics and using the software Hercules SETUP utility (free use).
USB- Serial Adapter 3.3.VoltUSB- Serial Adapter 3.3.Volt
RCQ3-868 RCQ3-868
These operation can be done also in Text Mode instead that in Hex Mode, in this case the default string is :« » ( 7E 7E 7E 7E 7E 7E 7E 7E 50 3A~~~~~~~~P:To modify is necessary send the following text string « » (53 43 7E 7E 7E 7E 70 70 70 70 56 3A3C~~~~ppppV:
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 8 / 21www.radiocontrolli.com
Serial Port COM8 Serial Port COM10
Push this button, in this modewe sent the following string “This is a communication from COM10"
Push this button, in this mode we sent the following string “ ”This is a communication from COM8
Echo String received
EchoString received
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 9 / 21www.radiocontrolli.com
2.4 Local List Command
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
OUTPUT RL1
UART RX
UART TX
OUTPUT RL2
OUTPUT RL3
OUTPUT RL4
OUTPUT RL5
OUTPUT RL6
OUTPUT RL7
OUTPUT RL8
pin 3
pin 31
pin 33
pin 8
pin 7
pin 5
RCQ3-868
pin 4
pin 26
pin 27
pin 6
pin 32
pin 30
Remote Address = 7E7E7E7ELocal Address = 7E7E7E7E
INPUT S1
INPUT S2
INPUT S3
INPUT S4
pin 36
pin 35
pin 34
pin 29
UART RTS
UART CTS
See par. 2.4.1.
LocalCommand Description
1
7
6
8
?C
2
3
4
5
Example
?T
See par. 2.4.1
Returns the value of Battery (Volt)
1) Remote Address, 2) Local Address, 3) Frequency, 4) Power Value
?BR
Return the configuration parameters :SB
?S
?V
?I
?O
?B
10
9
Returns the state of the Outputs : RL1,RL2,RL3,RL4,RL5,RL6,RL7,RL8
Returns the state of the Inputs : K1,K2,K3,K4,K5,S1,S2,S3,S4,Test Mode
Returns the firmware version
Returns the baud rate setted
Returns the initial informations
Returns the command list
Allow to modify the configuration of the module example:
^C~~~~~~~~T2 (text) or 53 43 7E 7E 7E 7E 7E 7E 7E 7E 54 32 (HEX)
^C+CONF
?H
Returns the temperature value (°C)
11 Value accepted : 115200,57600,38400,19200,9600,4800,2400,1200
Example : ^C115200. After this command you must reset the device.
^C+BAUDATE
See par. 2.4.2
See par. 2.4.2
See par. 2.4.3
See par. 2.4.3
See par. 2.4.4
See par. 2.4.4
See par. 2.4.5
See par. 2.4.5
See par. 2.4.6
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 10 / 21www.radiocontrolli.com
2.4.1 Command«?C»
2.4.2 and Command«?T» «?B»
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Answer in text modeAnswer in text mode
Command
Command
Answer in HEX mode
Command
Answer in text mode Answer in text mode
Command Command
Return the value in °C. Return the value in Volt.
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 11 / 21www.radiocontrolli.com
2.4.3 and Command«?O» «?I»
2.4.4 and Command«^V+ Configuration» «?BR»
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
00000000 means that the 8 output RL1,RL2,RL3,Rl4, RL5,RL6,RL7,RL8 are a Low level.
Firmware version Baud rate
Answer in text mode
Command
Answer in text mode
Command
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 12 / 21www.radiocontrolli.com
2.4.5 and Command«?S» «?H»
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Initial information Command List
2.4.6 «^C+ Configuration»
Example of configuration in text mode and in Hex Mode
See par. 2.4.1.
RemoteCommand Description
1
6
#?C
2
3
4
5
Example
#?T
See par. 2.5.1
Returns the value of Battery (Volt)
1) Remote Address, 2) Local Address, 3) Frequency, 4) Power Value
Return the configuration parameters :SB
#?V
#?I
#?O
#?B
7
Returns the state of the Outputs : RL1,RL2,RL3,RL4,RL5,RL6,RL7,RL8
Returns the state of the Inputs : K1,K2,K3,K4,K5,S1,S2,S3,S4,Test Mode
Returns the firmware version
Allow to modify the configuration of the module example:
^C~~~~~~~~T2 (text) or 53 43 7E 7E 7E 7E 7E 7E 7E 7E 54 32 (HEX)
^C+CONF
Returns the temperature value (°C) See par. 2.5.2
See par. 2.5.2
See par. 2.5.3
See par. 2.5.3
See par. 2.5.4
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 13 / 21www.radiocontrolli.com
2.5 Remote List Command
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
OUTPUT RL1
OUTPUT RL1
UART RX
UART RX
UART TX
UART TX
OUTPUT RL2
OUTPUT RL2
OUTPUT RL3
OUTPUT RL3
OUTPUT RL4
OUTPUT RL4
OUTPUT RL5
OUTPUT RL5
OUTPUT RL6
OUTPUT RL6
OUTPUT RL7
OUTPUT RL7
OUTPUT RL8
OUTPUT RL8
pin 3
pin 3
pin 31
pin 31
pin 33
pin 33
pin 8
pin 8
pin 7
pin 7
pin 5
pin 5
RCQ3-868
LOCAL DEVICE
REMOTE DEVICE
RCQ3-868
pin 4
pin 4
pin 26
pin 26
pin 27
pin 27
pin 6
pin 6
pin 32
pin 32
pin 30
pin 30
INPUT S1
INPUT S1
INPUT S2
INPUT S2
INPUT S3
INPUT S3
INPUT S4
INPUT S4
pin 36
pin 36
pin 35
pin 35
pin 34
pin 34
pin 29
pin 29
UART RTS
UART RTS
UART CTS
UART CTS
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 14 / 21www.radiocontrolli.com
2.5.1 Command«#?C»
2.5.2 and Command«#?T» «#?B»
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Return the value in °C. Return the value in Volt.
Command
Answer in text mode
Answer in HEX mode
Answer in text mode Answer in text mode
Command Command
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 15 / 21www.radiocontrolli.com
2.5.3 and Command«#?O» «#?I»
2.5.4 «#^C+ Configuration»
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
00000000 means that the 8 output RL1,RL2,RL3,Rl4, RL5,RL6,RL7,RL8 are a Low level.
TEXT Mode HEX Mode
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 16 / 21www.radiocontrolli.com
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
3.0 Wireless Switch
3.1 One to one operation
It’s an 8 channels wireless switch module with pairing function, it provides maximum 8 channel signal input and maximum 8 channel control output (4 bistable channels and 4 monostable channels). The configuration is the same of Radio Modem functionality (see pag. 6), Local address and Remote address must be set up appropriately.
Example of communication between modules A and B :
The 4 output of ( RL1,RL2,RL3,RL4) is corresponding to the 4 input of module A (K1,K2,K3,K4 and K5=open), these 4 outputs are of the bistable type (see picture).module B
The 4 output of ( RL1,RL2,RL3,RL4) is corresponding to the 4 input of module B (K1,K2,K3,K4 and K5=open), these 4 outputs are of the bistable type (see picture).module A
The 4 output of ( RL5,RL6,RL7,RL8) is corresponding to the 4 input of module A (K1,K2,K3,K4 and K5=GND), these 4 outputs are of the monostable type (see picture).module B
The 4 output of ( RL5,RL6,RL7,RL8) is corresponding to the 4 input of module B (K1,K2,K3,K4 and K5=GND), these 4 outputs are of the monostable type (see picture).module A
K1
OUTPUT RL1
OUTPUT RL2
OUTPUT RL3
OUTPUT RL4
OUTPUT RL5
OUTPUT RL6
OUTPUT RL7
OUTPUT RL8
pin 24
pin 31
pin 33
pin 8
pin 7
pin 5
RCQ3-868
MODULE A
K2
K3
K4
K5
pin 15
pin 18
pin 23
pin 14
pin 6
pin 32
pin 30
K1
OUTPUT RL1
OUTPUT RL2
OUTPUT RL3
OUTPUT RL4
OUTPUT RL5
OUTPUT RL6
OUTPUT RL7
OUTPUT RL8
pin 24
pin 31
pin 33
pin 8
pin 7
pin 5
RCQ3-868
MODULE B
K2
K3
K4
K5
pin 15
pin 18
pin 23
pin 14
pin 6
pin 32
pin 30
Push K1 and RL1 of will be ActiveMODULE A MODULE B
Push K1 and RL1 of will be ActiveMODULE B MODULE A
Remote Adress = 7E7E7E7ELocal Address = 7E7E7E7E
Remote Adress = 7E7E7E7ELocal Address = 7E7E7E7E
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 17 / 21www.radiocontrolli.com
3.1 One to many operation
Example of communication between modules A , B, and C, in this case the Remote Address and Local Address are in default condition.By changing remote and Local address you can get different types of configuration.
K1
OUTPUT RL1
OUTPUT RL2
OUTPUT RL3
OUTPUT RL4
OUTPUT RL5
OUTPUT RL6
OUTPUT RL7
OUTPUT RL8
pin 24
pin 31
pin 33
pin 8
pin 7
pin 5
RCQ3-868
MODULE A
K2
K3
K4
K5
pin 15
pin 18
pin 23
pin 14
pin 6
pin 32
pin 30
K1
K1
OUTPUT RL1
OUTPUT RL1
OUTPUT RL2
OUTPUT RL2
OUTPUT RL3
OUTPUT RL3
OUTPUT RL4
OUTPUT RL4
OUTPUT RL5
OUTPUT RL5
OUTPUT RL6
OUTPUT RL6
OUTPUT RL7
OUTPUT RL7
OUTPUT RL8
OUTPUT RL8
pin 24
pin 24
pin 31
pin 31
pin 33
pin 33
pin 8
pin 8
pin 7
pin 7
pin 5
pin 5
RCQ3-868
RCQ3-868
MODULE B
MODULE C
K2
K2
K3
K3
K4
K4
K5
K5
pin 15
pin 15
pin 18
pin 18
pin 23
pin 23
pin 14
pin 14
pin 6
pin 6
pin 32
pin 32
pin 30
pin 30
Push K1 ---> RL1 of and RL1 of --> ACTIVEMODULE A MODULE B MODULE C
Push K1 ----> RL1 of and RL1 of --> ACTIVEMODULE B MODULE A MODULE C
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
Remote Adress = 7E7E7E7ELocal Address = 7E7E7E7E
Remote Adress = 7E7E7E7ELocal Address = 7E7E7E7E
Remote Adress = 7E7E7E7ELocal Address = 7E7E7E7E
Push K1 ----> RL1 of and RL1 of --> ACTIVEMODULE C MODULE A MODULE B
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 18 / 21www.radiocontrolli.com
It’s an 4 channels wireless controller module with pairing function, it’s possible to control and verify the logic state (open or close) of the Remote Module.
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
4.0 Wireless Controller
T1
INPUT S1
INPUT S2
INPUT S3
INPUT S4
pin 13
pin 36
pin 35
pin 34
pin 29
RCQ3-868
MODULE A
A-RED
A-GREEN
T2
T3
T4
pin 16
pin 21
pin 22
Remote Adress = 7E7E7E7ELocal Address = 7E7E7E7E
D5Rpin 11
D5Vpin 12
R
R
V
CC
T1
INPUT S1
INPUT S2
INPUT S3
INPUT S4
pin 13
pin 36
pin 35
pin 34
pin 29
RCQ3-868
MODULE B
B-RED
B-GREEN
T2
T3
T4
pin 16
pin 21
pin 22
Remote Adress = 7E7E7E7ELocal Address = 7E7E7E7E
D5Rpin 11
D5Vpin 12
R
R
V
CC
1) Push T1,T2,..T4 on MODULE A 2) Will be done a control on (Input S1,S2,..S4) MODULE B
3) If (S1-S4)=GND the led A-RED will be ON and the led A-GREEN will be OFF.
4) If (S1-S4) will be different from GND the led A-GREEN will be ON and the LED A-RED will be OFF.
5) If there is not any comunication, both LED (A-GREEN and A-RED) will be OFF.
1) Push T1,T2,..T4 on MODULE B 2) Will be done a control on (Input S1,S2,..S4) MODULE A
3) If (S1-S4)=GND the led A-RED will be ON and the led A-GREEN will be OFF.
4) If (S1-S4) will be different from GND the led A-GREEN will be ON and the LED A-RED will be OFF.
5) If there is not any comunication, both LED (A-GREEN and A-RED) will be OFF.
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 19 / 21www.radiocontrolli.com
Wireless actuator for home automation, it’s possible use 1 unit as Transmitter (controllable viaRS232 serial interface) and by one or more RX units with the possibility to switch 4 astablechannels and 4 bistable channels for every RX units.The unit denominated used ad Transmitter can be controlled by a normal PC by a Raspberry device or by an Arduino microcontroller. It is possible to have a "point to point" configuration (No.1 TX unit - No.1 RX unit) or a "point-multipoint" configuration (No. 1 TX unit more RX Unit).
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
5.0 Wireless Actuator
LIST COMMAND TO SEND BY RS-232 port
OUTPUT RL1
UART RX
UART RX
UART TX
UART TX
OUTPUT RL2
OUTPUT RL3
OUTPUT RL4
OUTPUT RL5
OUTPUT RL6
OUTPUT RL7
OUTPUT RL8
pin 3
pin 3
pin 31
pin 33
pin 8
pin 7
pin 5
RCQ3-868
LOCAL DEVICE
REMOTE DEVICE
RCQ3-868pin 4
pin 4
pin 26
pin 26
pin 27
pin 27
pin 6
pin 32
pin 30
INPUT S1
INPUT S2
INPUT S3
INPUT S4
pin 36
pin 35
pin 34
pin 29
UART RTS
UART RTS
UART CTS
UART CTS
Command Sentfrom RS232 Description
1
7
#0X0
3
4
5
6
#0XB
Set the bistable Output «X» to Low Level (»X» can be 1,2,3,4)
#?0XSB
#?0XSM
#0XM
#0XD
Request the state of the bistable outputs , returns the string on a serial port type : 1111 (all high)
Change the state of the bistable Output «X» (»X» can be 1,2,3,4)
#0X1 Set the bistable Output «X» to High Level (»X» can be 1,2,3,4) 2
Change the state of the monostable Output «X» (»X» can be 1,2,3,4)
Change the state of the monostable Output «X» for 1 minute
Request the state of the monostabel outputs , returns the string on a serial port type : 1111 (all high)
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 20 / 21www.radiocontrolli.com
HYPERLINK
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
6.0 Evaluation board
- The Evaluation kits is composed from N. 2 RCQ3-868 demo board complete with 868MHz Antenna and N. 2 cable USB (USB A plug, USB B mini plug).- It’s necessary install the Cp2102 driver on your computer, you can find this driver or on Silicon Labs website or on this
- The RCQ3-868 demo board has a battery pack (in the back) to make stand-alone operation.- T1, T2,T3, T4 are buttons to check the state of the remote unit (S1, S2, S3, S4 inputs).- K1,K2,K3,K4,K5 are buttons to switch the state of the remote unit (RL1 to RL8 Outputs).
Serial Interface based on Silicon Labs CP2102
Antenna SMA Connector
RCQ3-868Transceiver
T1,T2,T3,T4
Led State
K1,K2,K3,K4,K5
Power USB / Battery
S1,S2,S3,S4INPUT
DIP SWITCHBistable/Monostable
RL1,RL2,RL3,RL4 Bistable OUTPUTRL5,RL6,RL7,RL8 Monostable OUTPUT
Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. Rev 1.0
Pag. 21 / 21www.radiocontrolli.com
Radio Wireless Modules
ontrolli
RCQ3-868 - Multichannels Radio Modem - Wireless Switch - Wireless Controller - Wireless Actuator
6.1 Evaluation board electrical schematics