rdl//vibe remote vibration monitoring system
DESCRIPTION
The RDL//Vibe is a completely self powered, remote, GSM based shock monitoring system for sensitive properties and structures. The RDL//Vibe will capture any shocks/vibrations that exceed the pre-defined levels you have configured via the secure web bureau. An alarm will then be generated via SMS or email to your selected list of recipients enabling immediate, corrective action to be undertaken. All data is stored securely on the web bureau allowing full historical access to all events that have occurred.TRANSCRIPT
Shock And Vibration Remote Monitoring System For Sensitive
Properties And Structures
• Vibration limits set by accessing secure web portal
• Connect to two, tri-axial vibration sensors• RDL//Vibe will capture shocks at high speed
and high resolution• Background ‘guardian mode’ sampling for
system integrity check• All events are captured and automatically
transferred to web portal via mobile phone network
• All events can be configured to send alarms via email or SMS
• 100% battery powered• All events can be accessed via web portal
by anyone with correct permissions – no software to install
The RDL//Vibe is a completely self powered, remote, GSM based shock monitoring system for sensitive properties and structures. The RDL//Vibe will capture any shocks/vibrations that exceed the pre-defined levels you have configured via the secure web bureau. An alarm will then be generated via SMS or email to your selected list of recipients enabling immediate, corrective action to be undertaken.All data is stored securely on the web bureau allowing full historical access to all events that have occurred.
List of all historical events through browser
Full graphing capabilities within browser
Specifications:-
Unit Features
•D cell 3.6 V Battery powered.•On board quad band GSM modem•Optional DC powered (8 – 18Vdc range).•External GSM antenna fitted as standard.•LED status indicators on front panel.•IP66 rated ABS enclosure.•Automatic log into to secure web bureau over GSM/GPRS as soon as unit is powered up•Slow sample frequency set via web bureau. Options include ( s, seconds, m, minutes, h, hour) 5s, 10s, 15s, 30s, 1m, 2m, 5m, 10m, 15m, 30m, 1h, 2h, 3h, 6h, 12h or 24h.•Report rate set via web Bureau, Options ( m, minutes, h, hours) 1m, 2m, 5m, 10m, 15m, 30m, 1h, 2h, 3h, 6h, 12h, 24h, 48h or 1 week.• Fast Sample frequency options (Hz) 10, 25, 50, 75, 100, 150, 200, 250, 300, 350, 400, 450, 500.•On board non-volatile memory to store sensor data if power or GSM signal is lost.•Geophone input options:
1 or 2 , 3 axis Natural Frequency sensitivity range:o4.5 Hz to 14 Hz
Geophone on standard length flying leadso0.5 meters to 5 metres
