rds-caa qualification and programming primer for calypso ......for calypso version 5.2 rds-caa...
TRANSCRIPT
![Page 1: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/1.jpg)
RDS-CAA Qualification and Programming Primerfor Calypso version 5.2
RDS-CAA Primer (5.2) 1
![Page 2: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/2.jpg)
The MasterProbe will have to be of type RDS-CAA in order to proceed with RDS-CAA
qualification. The “Fitting Position” button should be visible.
RDS-CAA Primer (5.2) 2
![Page 3: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/3.jpg)
If MasterProbe is not already of type RDS-CAA, drop down the “Mode” menu, choose
“CFS qualification,” and proceed with locating Reference Sphere Position
RDS-CAA Primer (5.2) 3
![Page 4: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/4.jpg)
If MasterProbe is already of type RDS-CAA, select “Ref. Sphere position” and follow
prompts. NOTE: If not already in A=0, B=0, be sure to drive the RDS clear of all
obstacles.
RDS-CAA Primer (5.2) 4
![Page 5: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/5.jpg)
When qualifying RDS-CAA, it is recommended that the Reference Sphere is oriented
vertically.
Unscrew the reference sphere from rotating plate, loosen rotating plate and rotate 180
and reattach the reference sphere to the top threaded hole.
RDS-CAA Primer (5.2) 5
![Page 6: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/6.jpg)
Be sure that the “Tilt” is set correctly. If the Reference Sphere is oriented vertically, “Tilt”
should be set to 180. It matters not what Rotation angle is set. Take the first point in the
direction of the stylus, as always.
RDS-CAA Primer (5.2) 6
![Page 7: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/7.jpg)
After setting the Reference Sphere position, it is necessary to set the Fitting Position of
the MasterProbe. In this process, the MasterProbe will automatically find the Reference
Sphere position in all 12 orientations.
RDS-CAA Primer (5.2) 7
![Page 8: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/8.jpg)
The progress of the Fitting Position is posted in the window. Status will indicate an OK
status unless there has been a collision. Check that the Standard Deviation for
MasterProbe is acceptable.
RDS-CAA Primer (5.2) 8
![Page 9: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/9.jpg)
To create a new stylus system, attach the stylus system, select “Pick Up Stylus System.”
RDS-CAA Primer (5.2) 9
![Page 10: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/10.jpg)
Choose “New”
RDS-CAA Primer (5.2) 10
![Page 11: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/11.jpg)
Check the Probe type (RST, XDT, XXT TL3)
NOTE: XXT types TL1 and TL2 are not compatible with RDS-CAA qualification.
RDS-CAA Primer (5.2) 11
![Page 12: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/12.jpg)
Enter the NAME and STYLUS NAME “1.” Check box for RDS-CAA
For qualification of individual positions, the box must remain unchecked.
This is the only place where qualification type (normal or RDS-CAA) may be set
RDS-CAA Primer (5.2) 12
![Page 13: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/13.jpg)
Select “Qualify stylus.” NOTE: If not already in A=0, B=0, be sure to drive the RDS clear
of all obstacles. Take point in the direction of stylus shaft. Qualification of all 12 positions
will be automatic.
RDS-CAA Primer (5.2) 13
![Page 14: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/14.jpg)
Progress of qualification will be posted in the window.
RDS-CAA Primer (5.2) 14
![Page 15: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/15.jpg)
To add a new stylus, select the “Add New Stylus” buttonEnter Name “2.”
RDS-CAA Primer (5.2) 15
![Page 16: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/16.jpg)
Select “Qualify Stylus,” Choose “Full Qualification.”
RDS-CAA Primer (5.2) 16
![Page 17: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/17.jpg)
In the window, select each position, choosing “Show” for each. Be sure head is free for
rotation.
RDS-CAA Primer (5.2) 17
![Page 18: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/18.jpg)
If any position is not able to be qualified, choose “Alternative.” Click “Show” for the new
angle.
RDS-CAA Primer (5.2) 18
![Page 19: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/19.jpg)
Once all positions have been proofed for collisions, Click OK.
RDS-CAA Primer (5.2) 19
![Page 20: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/20.jpg)
Progress will be posted in the window.
RDS-CAA Primer (5.2) 20
![Page 21: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/21.jpg)
Once the Stylus System has been qualified with RDS-CAA, it may be used in
measurement programs.
RDS-CAA Primer (5.2) 21
![Page 22: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/22.jpg)
Create the measurement program as usual.
RDS-CAA Primer (5.2) 22
![Page 23: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/23.jpg)
In The Features Settings Editor, navigate to Stylus System.
RDS-CAA Primer (5.2) 23
![Page 24: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/24.jpg)
If not already assigned, select features and “Set to” the desired Stylus system.
RDS-CAA Primer (5.2) 24
![Page 25: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/25.jpg)
If not already assigned, select features and “Set To” desired Stylus (“1” or “2”).
RDS-CAA Primer (5.2) 25
![Page 26: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/26.jpg)
In the new menu, “RDS Angles” it is possible to set the angle for each feature, however
this method is rather tedious and fraught with errors.
RDS-CAA Primer (5.2) 26
![Page 27: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/27.jpg)
Instead, go to the Stylus Rotation window.
RDS-CAA Primer (5.2) 27
![Page 28: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/28.jpg)
A CAD representation of the head, probe, and stylus appears. The current position is
listed under “New Angle Position”
A=0.0, B=0.0 indicates a “down” position.
RDS-CAA Primer (5.2) 28
![Page 29: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/29.jpg)
Angle Cheat Sheet
A=-908,
B=908
indicates a
“back”
orientation
A=08,
B=908
indicates a
“right”
orientation
A=-908,
B=-908
indicates a
“front”
orientation
A=08,
B=-908
indicates a
“left”
orientation
RDS-CAA Primer (5.2) 29
![Page 30: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/30.jpg)
Alternatively, the angle can be set by the orientation of a feature. Select the feature and
select “To Feature.”
RDS-CAA Primer (5.2) 30
![Page 31: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/31.jpg)
If the preview of the angle of the stylus is incorrect, select “Invert Position.”
RDS-CAA Primer (5.2) 31
![Page 32: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/32.jpg)
Once satisfied with the angle, accept the angle.
RDS-CAA Primer (5.2) 32
![Page 33: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/33.jpg)
To apply current angle to features, select the appropriate features and select “Apply
Angle.”
RDS-CAA Primer (5.2) 33
![Page 34: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/34.jpg)
Changes should be reflected in the Features Settings Editor.
RDS-CAA Primer (5.2) 34
![Page 35: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/35.jpg)
Select orientation and apply for remaining features.
RDS-CAA Primer (5.2) 35
![Page 36: RDS-CAA Qualification and Programming Primer for Calypso ......for Calypso version 5.2 RDS-CAA Primer (5.2) 1. The MasterProbe will have to be of type RDS-CAA in order to proceed with](https://reader030.vdocuments.net/reader030/viewer/2022040300/5e6d2f22b6371770d465d574/html5/thumbnails/36.jpg)
Changes should be verified in Features Settings Editor.
RDS-CAA Primer (5.2) 36