reading the parts table for sleeve style springs -...
TRANSCRIPT
126
Reading the partstable for sleeve style springs
1 2 3 4 5 6 7
1. ApplicationsIn this section, we provide all the information that is known aboutthis specific application (i.e., model number, years of manufacture,part numbers, Firestone reference numbers and competitornumbers if known).
2. Order NumberThis number identifies the specific assembly order number thatneeds to be used for ordering purposes. It is important that thecomplete order number is used to avoid any confusion, especiallywith any type of electronic ordering. The complete order number inthe example is W02-358-7017.
3. Cross Section ViewThis section is a cross sectionaldrawing of the Airide spring showingdimensional information in inches.The two heights shown to the right ofthe drawing are for extended andcompressed measurementsuninflated. The part number shown at the left is the last four digits of the A.O.N. (Airide Order Number). In the example,W02-358-7017 is abbreviated to “7017”. The last 7 digits of theA.O.N. are stamped into the lip of the cap, around the perimeter.
The AON number may also be stamped on the crimping.
4. Cap Drawing NumberShown in this section of the tableabove is the drawing number moldedinto the material of most caps,followed by an additional four digitnumber enclosed in parentheses. Thedrawing numbers will generally startwith the letters NBD. The four digitnumber is a stores number for thiscomponent, not an assembly identification number. In this book you will see another notation following the four digitnumber. This refers to the material that the cap is made of,specifically aluminum or plastic.
5. Piston Drawing NumberThis section refers to the piston endof the sleeve. It is shown in thesame way as the cap information.
6. BCR/Logo ColorThis dimension is the measurementtaken between the two metal ringson each end of the assembly. Note: BCR measurement on a used Airide spring will be somewhatshorter than specified in this catalog.The Airide™ spring shield logo colorindicates a very specific constructionof the bellows.
7. WeightThis is the total weight of the Airidespring assembly.
NBD-10010(7007)
BCR
LogoColor
Cap Drawing Number
358-7017
NBD-10010
(7007)
A.O.N.Number
CROSS SECTION VIEWCAP
DRAWINGNUMBER
PISTONDRAWINGNUMBER
BCR/LOGO
COLORAPPLICATIONS WEIGHTORDER NUMBER
(W02-358)
11.5"/Maroon
7023 (AL)NBD-10071
7007 (AL)NBD-1001015.03
3.89
1/2-13 x.80 DEEP
2.84 DIA.
.62
1/8 NPTF
3/4-16
2.13 DIA.
3.38
5.0 INF.2.9 UNINF.
7017227QS38
MACK
127
Slee
ve S
tyle
Spr
ings
The components of sleeve style springs
1. Combo StudCombination mounting stud and air fitting.
2. Blind NutA blind tapped hole in either the piston or cap.
3. Air Fitting HoleWhen using a blind nut or stud instead of a combo stud,a separate air fitting is required.
4. Clamp PlateAlso called the “Cap”, this is the upper aluminum orplastic end. This provides the mounting hardware, andnormally the air fitting.
5. BellowsThe heart of an Airide spring is the sleeve, or bellows. It is made of four layers: an inner liner of rubber, twoplies of cord reinforcement, and an outer cover.
6. PistonThe lower end of the assembly that the rubber rolls overis called the “piston”. This is also made of eitheraluminum or plastic. It provides the lower mountinghardware for the assembly.
7. Clamp RingThese are the metal rings used to permanently attachthe bellows to the clamp plate and piston.
1
4
2
2
4 3
5
6
5
7
7
7
6
2
7
128
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7079
3/8-16x .65 DEEP
(TH’D)
2.84 DIA.
1.70
1/8 NPTF
1.48
8.002.40
.75
2.90
2.9 UNINF.
.88
7074NBD-11636
7083NBD-13727
6”Orange 0.7 LINK MANUFACTURING LTD
1102-0026 (Nav.)
W02-358-7046
.65 DEEP(TH’D)
2.84 DIA.3/8-16x
3/8-16x
.54 DEEP
2.90 DIA.
1/8 NPTAIR INLET.75
1.48
7.792.40
2.9 UNINF.
.88
7068NBD-10470
7083NBD-13727
6”Orange 0.7 LINK MANUFACTURING LTD
1102-0022 (Ford, Frt. GMC, Pete)
W02-358-7086
3/8-16x .50 DEEP
2.88 DIA.
7.252.40
1/8 NPTF
2.84 DIA.
3/4-16 .62
1.48
2.9 UNINF.
7018NBD-10218
7052NBD-10552
5.25”Orange 0.7 LINK MANUFACTURING LTD
1102-0025 (Ford)
W01-358-7025
5.8 UNINF.
3.0MIN. HT.
1.75
1.75
1/4 NPTF
3/8-16 x .62 DEEP
4.50
3030 3025 3.8 FREIGHTLINER / WESTERN STAR(style #25 bellows)
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
129
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-6754
3/8-16 x.50 DEEP
2.90 DIA.
9.502.50
1/8 NPTF
2.84 DIA.
3/4-16x 1.00
TH’D MIN.1.25
1.48
2.90 UNINF .
NYLONWASHER
NYLONNUT
7014NBD-10082
6996NBD-13499
7.50”Orange 1.0
PETERBILT20-16754Day Cab (1994 & later)Dynacraft D5000-2250
W02-358-7201
1/8 NPTF
3/4-16 UNFNYLONJAM NUT
3/8-16 UNC x.50 DEEP
2.9 UNINF.
8.253.50
1.48
2.88.62
2.84
7018NBD-10218
7052NBD-10552
7.25”Orange 1.2
FREIGHTLINER / STERLING18-45068-000 Sterling Day CabOld Ford # P/N F6HT5C06CABHN-80 Day Cab (1996 & later)
W02-358-7150
3/8-16 UNC x.88 DEEP
3/4-16 UNF
1/8 NPTF2.9 UNINF.
8.002.20
2.90
1.48
2.84
7015NBD-10239
7083NBD-13727
7.00”Orange 0.7 SEARS/DURAFORM
S13384 (W02-811-7150)
W02-358-7001
3/8-16 x.50 DEEP
2.88 DIA.1/8 NPTF
2.84 DIA.
3/4-16 .62
1.48
8.462.40
2.9 UNINF .
7018NBD-10218
7052NBD-10552
6.75”Orange 0.7
LINK MANUFACTURING LTD1102-0020 (NAV.) see 1102-00231102-0023 (Ford, Frt, GMC, KW, Nav.,Volvo)
COMFORT RIDE
WISE
130
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7059
3.20 DIA.
3.13
11.703.66
.52
.741/8 NPT
2.84 DIA.2.9 UNINF.
.50.50
7042NBD-10409
6896NBD-12708
8.25”Orange 1.3
NATIONAL SEATING324663-01 (W02-N19-7059)328035-01 (W02-N19-7069)329666-01 (W02-N19-7084)
W02-358-7041
11.814.01
1/2-13THREADED
HOLE(.87 DEEP)
2.84 DIA.2.9 UNINF.
.62
1/8 NPTAIR INLET
3/4-16
2.12 DIA.
3.51
7015NBD-10239
7033NBD-10238
8.25”Orange 1.2 SEARS / DURAFORM
S8645 (W02-811-7041)
W02-358-7155
3/4-16 UNFNYLON NUT
1/8 NPT
2.9 UNINF.3.09
.65
8.502.20
1.48
2.90
1.25
6991NBD-14314
6996NBD-13499
7.50”Orange 1.0
PETERBILT20-19036Uni-Built HighwayFront Support SpringDynacraft D5000-2253
W02-358-7100
3/8-16x .65 DEEP
(TH’D)
2.84 DIA.2.9 UNINF.
2.90 DIA.
1/8 NPTAIR INLET.75
1.48
9.502.40
.88
3/8-16x .54 DEEP
7068NBD-10470
7083NBD-13727
7.50”Orange 0.7 3-T’S
W02-T03-7100
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
131
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7098
2.84 DIA.
2.10 DIA.
3.51
.50
.751/8 NPTF
.50
13.404.00
2.90 UNINF.
3/4-16
6997NBD-13262
7041NBD-10215
9.62”Orange 1.2 LINK MANUFACTURING LTD
1102-0027
W02-358-7054
2.84 DIA.
2.11 DIA.
3.51
.75
1/8 NPTF
3/4-16
13.294.04
3/8-16x .50 DEEP
2.9 UNINF.
7018NBD-10218
7041NBD-10215
9.25”Orange 1.2 WISE
W21-760-7076
3/8-16x .50 DEEP(TH’D)
2.90 DIA.
1.48
11.252.40
2.84 DIA.
.633/4-16
1/8 NPTF2.9 UNINF.
.75
7007NBD-10010
7054NBD-10795
9.25”Orange 0.8 RIDE-RITE
W02-358-7058
3.20 DIA.
3.13
12.293.66
.52.74
1/8 NPT
2.84 DIA..50
.50
2.9 UNINF.
7042NBD-10409
6896NBD-12708
9.00”Orange 1.3 NATIONAL SEATING
324662-01 (W02-N19-7058)
132
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7149
2.84 DIA.3/8-16x
.54 DEEP
3.20 DIA.
1/8 NPTAIR INLET
3.13
.75
13.633.66
.52.74
1/8 NPT
2.9 UNINF.
7068NBD-10470
6896NBD-12708
10.00”Orange 1.3 3-T’S
W02-T03-7149
W02-358-7055
2.84 DIA.
2.11 DIA.
3.51
.50
.501/8 NPTAIR INLET
.50
13.704.04
2.9 UNINF.
7042NBD-10409
7047NBD-10526
10.00”Orange 1.2
NATIONAL SEATING21122837050 Plastic (use 7055)
W02-358-7049
1/2-13x .87 DEEP
2.84 DIA.
2.11 DIA.
1/8 NPTAIR INLET
3.51
.75
13.863.89
2.9 UNINF.
3/8-16x .54 DEEP
7068NBD-10470
7033NBD-10238
10.00”Orange 1.2 3-T’S
W02-T03-7049
W02-358-7040 13.56
4.04
1/2-13x .87 DEEP
2.84 DIA.
.62
1/8 NPTAIR INLET
3/4-16
2.12 DIA.
3.51
2.9 UNINF.
7015NBD-10239
7033NBD-10238
10.00”Orange 1.2
KNOEDLER7010 AL (use 7040) (W02-K50-7060)
SEARS / DURAFORMS5388
SEATS707338
AIR FLEX
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
133
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7209
.75
.50
8.002.20
.53
1.48
.50
2.9 UNINF.
7042NBD-10409
6979FIP-100105
7.00”Green 1.3
SEATS708220(W02-812-7209)
W02-358-7031
3/8-16x .50 DEEP
2.88 DIA.1/8 NPT
AIR INLET
2.84 DIA.
3/4-16 .62
1.48
8.622.40
2.9 UNINF.
7014NBD-10082
7049NBD-10549
7.00”Green 1.3
MACK227QS33GY 1S4-007
W02-358-9901
23.437.05
5.46 DIA.
1.00
1/8 NPTF
3/4-16
5.10 DIA.
5.80
1.75
5.0 UNINF.
.50 DIA.x 1.0 DEEP
7066NAD-25400
7059NBD-11340
16.37”Orange 3.9
PETERBILT02-02031Front Axle Air Spring (production-1989 to1992)
W02-358-7073
1/2-13x .87 DEEP
2.84 DIA.3/8-16x .54 DEEP
2.12 DIA.
1/8 NPTAIR INLET.75
3.40
14.903.89
2.9 UNINF.
7013NBD-10183
7023NBD-10071
11.00”Orange 1.4 CARE CONCEPT
134
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7204
NYLONJAM NUT
3/4-16 UNF1/8 NPT
2.9 UNINF.
3.09
.60
9.004.70
1.48
2.90.62
6990NBD-13706
7052NBD-10552
8.00”Red 1.4
FREIGHTLINER / STERLINGSterling Actera18-43472-000
W02-358-7007
2.90 DIA.
7.562.40
1/8 NPTF
3/4-16 .62
1.48
2.9 DIA.
.25
1/8 NPTAIR INLET
3/4-16
2.9 UNINF.
7005NBD-9930
7049NBD-10549
6.25”Red 1.3
MACK227QS34GY 1S6-067
W02-358-7085
2.84 DIA.3/8-16x
.50 DEEP
2.12 DIA.
1/8 NPTF.75
3.41
15.403.90
2.9 UNINF.
1/2-13x .80 DEEP
7013NBD-10183
7023NBD-10071
11.5”Green n/a AIR FLEX
(W02-A05-7085)
W02-358-7106
2.84 DIA.
2.10 DIA.
3.51
.50
.751/8 NPTF
.50
13.904.00
2.9 UNINF.
.75
6997NBD-13262
7047NBD-10526
9.87”Green 1.2 LINK MANUFACTURING LTD
1102-0030 (Pete.)
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
135
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7206
PUSH TOCONNECTAIR FITTING
2.9 UNINF.3.09
.60
7.503.00
1.48
2.88
.60
6987NBD-15430
6986NBD-15431
6.5”White 1.2
FREIGHTLINER18-29919-000Century Class & Argosy COE (W02-377-7202) 2002 and earlier(replaces 7202)
W02-358-7035
3/8-16x .65 DEEP
(TH’D)
2.84 DIA.2.9 UNINF.
3/8-16
2.90 DIA.
1/8 NPTAIR INLET.75
1.48
8.602.40
.88
7068NBD-10470
7083NBD-13727
6.5”White 0.7
SEARS / DURAFORMS9383 (W02-811-7035)7025 AL (use 7035)
W02-358-7070
2.90 DIA.
9.502.40
1/8 NPTF
2.84 DIA.
.53
1.48
.50
2.9 UNINF.
.50
7042NBD-10409
6998NBD-12802
7.5”Pink 0.7 NATIONAL SEATING
2123403 (W02-N19-7070)
W02-358-7080
14.004.00
1/2-13x .87 DEEP
2.84 DIA.
.63
1/8 NPTF3/4-16
2.11 DIA.
3.51
2.9 UNINF.
7015NBD-10239
7033NBD-10238
10”Red 1.2 LINK MANUFACTURING LTD
1102-0031 (Frt.)
136
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7037
.50 DEEP
2.84 DIA.
3/8-16x
3/8-16x .54 DEEP
2.55 DIA.
1/8 NPTAIR INLET.75
1.57
10.102.50
2.9 UNINF .
7013NBD-10183
7054NBD-10795
8.0”White 0.7 AIR FLEX
(W02-A05-7037)
W02-358-7103
2.84 DIA.3/8-16x
.54 DEEP
2.90 DIA.
1/8 NPTF.75
1.48
9.752.40
2.9 UNINF.
3/8-16x .65 DEEP
(TH’D)
.88
7068NBD-10470
7083NBD-13727
7.75”White 0.7 3-T’S
W02-T03-7103
W02-358-7075
3/8-16x .50 DEEP
2.88 DIA.1/8 NPTF
2.84 DIA.
3/4-16 .62
1.48
9.752.40
2.9 UNINF.
7018NBD-10218
7052NBD-10552
7.75”White 0.7 LINK MANUFACTURING LTD
1102-0048
W02-358-7087
2.90 DIA.
8.752.40
1/8 NPTF
2.84 DIA.
.53
1.48
.50
2.9 UNINF.
.50
7042NBD-10409
6998NBD-12802
6.75”White 0.7
FREIGHTLINERFLD (1988 & later)GY 1S5-040
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
137
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7032
1/2-13x .87 DEEP
2.84 DIA.3/8-16x .54 DEEP
2.11 DIA.
1/8 NPTAIR INLET
3.51
.75
14.603.89
2.9 UNINF.
7068NBD-10470
7033NBD-10238
10.87”White 1.2
CARE CONCEPT7022 AL (use 7032)
INDEPENDENT MOBILITY
3-T’S
W02-358-7012 14.42
3.89
1/2-13 x.80 DEEP
2.84 DIA.
.623/4-16
2.13 DIA.
1/8 NPTAIR INLET
3.38
2.9 UNINF.
7007NBD10010
7023NBD-10071
10.87”White 1.5
LINK MANUFACTURING LTD1102-0040
RIDE-RITE
VANTAGE WHEEL CHAIR
W02-358-7074
2.84 DIA.
2.10 DIA.
3.51
.50
.75
.50
14.104.01
2.9 UNINF.
1/8 NPTF
3/4-16
6997NBD-13262
7041NBD-10215
10.12”White 1.2
FREIGHTLINERLink (1102-0047)
LINK MANUFACTURING LTD1102-00451102-0047 (Frt.)
W02-358-7061
2.88 DIA.
10.002.40
1/8 NPTF
2.84 DIA.
3/4-16 .62
1.48
.50
2.9 UNINF.
.50
7042NBD-10409
7052NBD-10552
8”White 0.7 C. E. WHITE
138
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7151
1/2-13 UNC x.50 DEEP
2.10
2.84
3/8-16 UNC x.50 DEEP
1/8 NPTF
4.21
14.504.12
2.9 UNINF.
3.51
7068NBD-10470
7033NBD-10238
10.87”White 1.4
SEARS/DURAFORMS16894 (W02-811-7151)
Piston Adaptor7802/NBD 14989
W02-358-7056
2.84 DIA.
2.11 DIA.
3.51
.50
.751/8 NPTAIR INLET
.50
14.433.89
.75
2.9 UNINF.
6997NBD-13262
7047NBD-10526
10.87”White 1.2 LINK MANUFACTURING LTD
1102-0043 (Frt. KW, Mack)
W02-358-7045
2.84 DIA.
2.11 DIA.
3.51
.50
.751/8 NPT
AIR INLET
.50
3/4-16
14.434.04
2.9 UNINF.
7042NBD-10409
7041NBD-10215
10.87”White 1.2 LINK MANUFACTURING LTD
1102-0042 (Western Star)
W02-358-7042
14.434.04
1/2-13x .87 DEEP
2.84 DIA.
.62
1/8 NPTAIR INLET
3/4-16
2.12 DIA.
3.51
2.9 UNINF.
7015NBD-10239
7033NBD-10238
10.87”White 1.2 COMFORT RIDE
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
139
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7017
15.033.89
1/2-13x .80 DEEP
2.84 DIA.
.62
1/8 NPTF
3/4-16
2.13 DIA.
3.38
2.9 UNINF.
7007NBD-10010
7023NBD-10071
11.5”Maroon 1.5 MACK
227QS38
W02-358-7029
1/2-13x .80 DEEP
2.84 DIA.3/8-16x .54 DEEP
2.11 DIA.
1/8 NPTAIR INLET
3.51
.75
15.754.01
2.9 UNINF.
7068NBD-10470
7033NBD-10238
11.75”White 1.2
CARE CONCEPT
INDEPENDENT MOBILITY
W02-358-7067
1/2-13 x.80 DEEP
2.84 DIA.3/8-16x
.54 DEEP
2.12 DIA.
1/8 NPTAIR INLET.75
3.41
15.403.89
2.9 UNINF.
7013NBD-10183
7023NBD-10071
11.5”White 1.5 AIR FLEX
(W02-A05-7067)
W02-358-7208
13.704.12
.50 .75
1/2-13 UNC X .80 DEEP
2.9 UNINF
2.11
2.84
3.51
6978FIP-100102
7033NBD-10238
11.12”White 1.0
SEATS708015(W02-812-7208)
140
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7109
2.88 DIA.
10.002.40
3.09
.60
1.48
2.9 UNINF.
.60
PUSH TOCONNECT
AIR FITTING
6990NBD-13706
6894NBD-14218
7.87”Yellow 1.0
KENWORTHKW Aerocab (mid 1999 & later)Link (1102-0077)
LINK MANUFACTURING LTD1102-0077 (KW)
W02-358-7108
3/8-16x .65 DEEP
(TH’D)
2.84 DIA.3/8-16x
.54 DEEP
2.90 DIA.
1/8 NPTF.75
1.48
9.752.40
2.9 UNINF.
.88
7068NBD-10470
7083NBD-13727
7.75”Yellow 0.7
LINK MANUFACTURING LTD1102-0075 (Nav.)
MILSCO07067AGY 1S5-057
W02-358-7064
3/8-16x .50 DEEP
2.88 DIA.1/8 NPT
AIR INLET
2.84 DIA.
3/4-16 .62
1.48
9.762.40
2.9 UNINF .
7018NBD-10218
7052NBD-10552
7.75”Yellow 0.7
KENWORTHKW Aerocab (mid 1999 & earlier)Link (1102-0074)
LINK MANUFACTURING LTD1102-0074 (KW, MARMON)
W02-358-4003 10.50
3.54
1.38 DIA.
1.68
3/8-16x .75 DEEP
.75
.50
2.87
1/8 NPTAIR INLET
2.0 UNINF.
7009NBD-10049
7044NBD-10514
7.25”Yellow n/a
COMFORT RIDE
SEARS / DURAFORMS6197 (W02-811-4003)
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
141
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7036
2.84 DIA.
2.28 DIA.
3.49
1.25
1/8 NPTF
3/4-16x .88 TH’D
14.004.00
3/8-16x .50 DEEP
2.9 UNINF.
NYLONWASHER
NYLONNUT
7014NBD-10082
7069NBD-12816
10”Yellow 1.4
PETERBILT29-03200Uni-built-Highway Cab/Sleeper 1993 &laterUni-built ft Support Spring 7155
W02-358-7082
3/8-16x .50 DEEP
2.88 DIA.
10.252.40
1/8 NPTF
2.84 DIA.
3/4-16 .62
1.48
2.9 UNINF.
7018NBD-10218
7052NBD-10552
8.25”Yellow 0.7 FREIGHTLINER / WESTERN STAR
66003-3405
W02-358-7205
PUSH TOCONNECTAIR FITTING
2.88 DIA.
10.104.50
3.09
.60
1.48
2.9 UNINF.
.60
6987NBD-15430
6986NBD-15431
8.0”Yellow 1.2
FREIGHTLINER / WESTERN STAR66003-3406Constellation(supersedes 7203)
W02-358-7038
.50 DEEP(TH’D)
2.84 DIA.
3/8-16x
3/8-16x
.54 DEEP
2.33 DIA.
1/8 NPTAIR INLET.75
1.57
10.102.50
2.9 UNINF .
.75
7013NBD-10183
7054NBD-10795
8.0”Yellow 1.4
AIR FLEX7048 AL (use 7038)
DONVEL
142
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7081
1/2-13x .80 DEEP
2.84 DIA.
2.11 DIA.
3.51
15.504.00
1/8 NPTF
2.9 UNINF.
.75.75
7074NBD-11636
7033NBD-10238
11.5”Yellow 1.2
NAVISTARLink 1102-0076Link 1101-0043GY 1S5-038
LINK MANUFACTURING LTD1102-0076 (NAV.)
W02-358-7044
15.504.04
1/2-13x .80 DEEP
2.84 DIA.
.62
1/8 NPTAIR INLET
3/4-16
2.12 DIA.
3.51
2.9 UNINF.
7015NBD-10239
7033NBD-10238
11.5”Yellow 1.2
AIR FLEX7014 AL (use 7044)
LINK MANUFACTURING LTD1102-0070 7014 AL (use 7044)
W02-358-7043
1/2-13x .80 DEEP
2.84 DIA.3/8-16x
.54 DEEP
2.12 DIA.
1/8 NPTAIR INLET.75
3.41
15.394.01
2.9 UNINF.
7013NBD-10183
7023NBD-10071
11.5”Yellow 1.4 DONVEL
W02-358-7024 14.75
3.89
1/2-13x .80 DEEP
2.84 DIA.
.62
1/8 NPTAIR INLET
3/4-16
2.13 DIA.
3.36
2.9 UNINF.
7007NBD-10010
7023NBD-10071
10.0”Yellow 1.5 LINK MANUFACTURING LTD
1102-0071
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
143
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-7200
1/8 NPTF
3/4-16 UNFNYLONJAM NUT
3/8-16 UNC x .50 DEEP
2.9 UNINF.2.84
11.254.75
1.48
2.88.62
7018NBD-10218
7052NBD-10552
10.25”Blue 1.2
FREIGHTLINER / STERLING18-42609-000 Sterling SleeperOld Ford # P/N F6HT5C063BAHN-80 Sleeper (1996 & later)
W02-358-7093
13.804.70
3.09
.99
3.16
2.90 UNINF.
.65
2.30
PUSH TOCONNECT
AIR FITTING
6991NBD-14314
6891NBD-14589
10.0”Blue 1.4
PETERBILT29-06016Model 387 (new in 1999)
W02-358-7092
3/8-16x .50 DEEP
2.90 DIA.
10.752.40
1/8 NPTF
2.84 DIA.
3/4-16 .62
1.48
2.9 UNINF.
7018NBD-10218
7052NBD-10552
8.75”Blue 0.7
KENWORTHKWCSA (Link 1102-0083)
LINK MANUFACTURING LTD1102-0083 (KW)
W02-358-7152
3/8-16 UNC x.50 DEEP
3/8-16 UNC x.88 DEEP
1/8 NPTF
2.9 UNINF.
7.502.20
1.48
2.90
2.84
7068NBD-10470
7083NBD-13727
6.50”Blue 1.0 KNOEDLER
100095-000 (W02-K50-7152)
144
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W02-358-9902
5.46 DIA.
2.75
11.503.70
3.88 DIA.
5.5 UNINF.
1/8 NPTF
TAPERED (127/95)
3/8-16x .56 DEEP
.753/4-16
6700NBD-13938
6897NBD-13939
8”N/A
LINK MANUFACTURING LTD1102-0080
W02-358-7110
2.84 DIA.
2.10 DIA.
3.51
3/8-16x .50 DEEP
.751/8 NPTF
14.504.00
2.9 UNINF.
.75
7018NBD-10218
7047NBD-10526
11.75”Blue 1.2
KENWORTHT2000-1998 & laterLink (1102-0082)
LINK MANUFACTURING LTD1102-0082 (KW)
W02-358-7083
15.504.00
1/2-13x .80 DEEP
2.84 DIA.
.63
1/8 NPTF
3/4-16
2.11 DIA.
3.51
2.9 UNINF.
7015NBD-10239
7033NBD-10238
11.5”Blue 1.2 LINK MANUFACTURING LTD
1102-0081 (Frt.)
W02-358-7207
PUSH TOCONNECTAIR FITTING
2.9 UNINF.3.09
.60
11.755.60
.601.48
2.88
6987NBD-15430
6986NBD-15431
10.75”Blue 1.2
FREIGHTLINER18-40977-000Centruy Class St(Supersedes by 7111)
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
145
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
W21-760-9011
5.90 DIA. 1/4 NPTO/S 1.31
4.92
16.307.00
6.0 UNINF.
3/8-16x .70 DEEP6.00 DIA.
TAPERED (140/95)
7526NBD-14584
7571NAD-28088
12.8”N/A
RIDE-RITEW21-760-9010 (use 9011)
W21-760-9002
4.76 DIA.1/4 NPTF
3.22
12.804.30
3.59 DIA.
2.75
4.8 UNINF.
3/8-16x .56 DEEP
TAPERED (110/70)
3/8-16x .50DEEP
O/S 1.31
6988NBD-15305
7572NBD-14048 8.9” RIDE-RITE
(Medium Part)
W21-760-9001
4.76 DIA.1/4 NPTFO/S 1.31
3.22
11.804.30
3.59 DIA.
2.75
4.8 UNINF.
3/8-16x .56 DEEP
TAPERED (110/70)
3/8-16x .50DEEP
6988NBD-15305
7572NBD-14048 7.9” RIDE-RITE
(Short Part)
W21-760-9000
4.76 DIA.3/8-16
x .50DEEP
1/4 NPTF
3.22
13.804.30
3.59 DIA.
2.75
4.8 UNINF.
3/8-16x .56 DEEP
TAPERED (110/70)
O/S 1.31
6988NBD-15305
7572NBD-14048 9.9” RIDE-RITE
(Long Part)
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
146
N/A
6.50
15.755.12
3.81
1.05
6.38
6.94 UNINF
6714NAD-30942
6888NAD-31336
12.13”N/A
HENDRICKSON TRUCK64075-2 (W26-455-9912)
N/A15.755.12
1.05
3.81
6.50
6.94 UNINF.
6.38
6713NAD-30942
6888NAD-31336
12.13”N/A
HENDRICKSON TRUCK60750-2 (W26-455-9913)
N/A
6.94 UNINF
6.38
3.81
15.755.89
1.05
6.50
6711NAD-30942
6890NAD-30940
12.13”N/A
HENDRICKSON TRUCK59823-2 (W26-455-9911)
Slee
ve S
tyle
Par
ts
Sleeve Style Parts
147
ASSEMBLYORDER NO. CROSS SECTION VIEW
CAPDRAWING
NO.
PISTONDRAWING
NO.
BCRLOGO
COLORWEIGHT APPLICATIONS
INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available