rebar cutter rapid cut 10l - allcon · 2020. 9. 17. · rapidcut 10l pneumatic rebar cutter the...

P: 1300 255 266 E: [email protected] W: allcongroup.com.au Model RCUT10L Max Cutting Range 10mm (70kg/mm2) Cutting Velocity 40 Cuts Per Minute Air Pressure Required 90-120 PSI (6-8.5 Bar) Air Consumption: Approx 15L / Cut at 7 Bar Replacement Jaws: 1260TM Weight 8.5kg Dimensions (LxWxH) 960mm x 250mm x 250mm REBAR CUTTER RAPID CUT 10L RapidCut 10L Pneumatic Rebar Cutter The RapidCut 10L is ideal for cutting rebar and mesh up to 10mm in thickness. The Pneumatic cutter has the same jaw action as standard bolt cutters and very simple to use and handle. The 10L features a longer stem meaning they can be used without needing to bend over reducing fatigue and back strain. They require minimal maintenance, reducing down time and making them a very cost-effective tool in demanding applications. The flat profile of the jaw means mesh can be cut while it is flat on the ground. These units are best suited to precast yards and mesh processing facilities.

Upload: others

Post on 03-Mar-2021

12 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: REBAR CUTTER RAPID CUT 10L - ALLCON · 2020. 9. 17. · RapidCut 10L Pneumatic Rebar Cutter The RapidCut 10L is ideal for cutting rebar and mesh up to 10mm in thickness. The Pneumatic

P: 1300 255 266E: [email protected]: allcongroup.com.au

Model RCUT10L

Max Cutting Range 10mm (70kg/mm2)Cutting Velocity 40 Cuts Per MinuteAir Pressure Required 90-120 PSI (6-8.5 Bar)Air Consumption: Approx 15L / Cut at 7 BarReplacement Jaws: 1260TMWeight 8.5kgDimensions (LxWxH) 960mm x 250mm x 250mm

REBAR CUTTERRAPID CUT 10L

RapidCut 10L Pneumatic Rebar Cutter

The RapidCut 10L is ideal for cutting rebar and mesh up to 10mm in thickness. The Pneumatic cutter has the same jaw action as standard bolt cutters and very simple to use and handle. The 10L features a longer stem meaning they can be used without needing to bend over reducing fatigue and back strain. They require minimal maintenance, reducing down time and making them a very cost-effective tool in demanding applications. The flat profile of the jaw means mesh can be cut while it is flat on the ground. These units are best suited to precast yards and mesh processing facilities.

Tuf-Bar | Fiberglass Rebar (GFRP) VS Traditional Steel Rebar

NOWA TANIN 10L - s.cdnmpro.com TANIN 10L.… · NOWA TANIN 10L WM 1303973 Order number: 0403973 Version 9.0 Revision Date 16.10.2019 Print Date 12.03.2020 2 / 21 Hazard pictograms

Rebar cold stamping machine/Rebar Coupler Pressing Machine

Promag 10L

Rebar Procesing

Rebar Splicing

Handbuch 10L Kraftstoffanlage, Auspuff

REBAR CUTTER RAPID CUT 16 - allcongroup.com.au · RapidCut 16 Pneumatic Rebar Cutter The RapidCut 16 is ideal for cutting rebar and mesh up to 16mm in thickness. The Pneumatic cutter

DTD152 10L 885432-997

Rebar Tonnage

10L user's manual D客户10L说明书2017-08-07 · Title: 10L user's manual D客户10L说明书2017-08-07.cdr Author: Administrator Created Date: 8/15/2017 5:07:30 PM

10l Inscrisi b