rechargeable led work light · bright33® rechargeable led work light h model: b33wl10w t r care...

1
BRIGHT33 ® RECHARGEABLE LED WORK LIGHT 1. POWER SWITCH MODEL: B33WL10W 3. CHARGING POWER INPUT 2. PROTECTIVE COVER CARE AND USE INSTRUCTIONS Allow the work light to cool down before cleaning. Once the work light is cool to the touch, clean it with a soft cloth and non-abrasive cleaner. CARE & CLEANING: • Charge one hour after each use • If work light is not used for a long time, apply one hour charging every three months • Store in cool place and avoid sun exposure MAINTENANCE: Bright33® warrants its light emitting diode (LED) fixtures, including the LED arrays and the LED drivers and integral control devices to be free from defect in material and workmanship for a period of two (2) years from the date of purchase. This warranty covers defects in manufacturing discovered while using the product as recommended by the manufacturer and does not apply tofailures caused by acts of God or as a result of any abuse, misuse, abnormal use, or use in violation of any applicable standard, code, or instructions for use in installations. If a Light Fixture fails due to a defect covered by this warranty, Stream33 Products LLC will replace the product. To make a warranty claim first call Stream33 Products LLC at 844-481-5004 to report the defect. Return the failed products with proof of purchase, your name, and address to the following address within thirty (30) days of the failure. Stream33 Products LLC, 350 Courtney Road, Sebring, Ohio 44672 USA LIMITED 2 YEAR WARRANTY: IMPORTANT INFORMATION: For indoor and outdoor use. This is not a toy. LED The power switch has three settings: High (1100 lumens), Low (550 lumens), and Off. Press the switch once for High, again for Off. Press again for Low and one more time to turn it Off. The switch will cycle as follows: High-Off-Low-Off The USB port is compatible with any outbound USB cable.* To begin outbound charging, first plug the USB end of the cable into the port, and then plug the other end into your device. Press the Battery Charge Level Indicator Button (white round button next to battery charge level indicator) to engage outbound power. When in use, the Battery Charge Level Indicator lights will illuminate and flash, displaying the amount of charge the light battery has reserved. *cable not included Using the charger provided, connect the power cable into the charging port, and plug the charging adapter into a wall outlet or other power source. To use the light with continuous A/C power, simply connect the power cable as described above and plug it into any A/C power source. (Using the light with A/C power simultaneously charges the batteries.) Keep this unit away from water when charging or running on A/C power. Unplug from charger when using outdoors. Use only the provided A/C charger when charging this light. Use of an incorrect charger may damage the light. 4. BATTERY CHARGE LEVEL INDICATOR Press the white button next to battery charge level indicator. The LED lights below the button will illuminate for three seconds, indicating the battery charge level: Battery charged to low level: one green LED turns on Battery charged to mid level: two green LEDs turn on Battery charged to high level: three green LEDs turn on 5. ROTATING STAND AND HANDLE The built-in stand pivots away from the light, providing support at any angle. When fully rotated to the top, the stand can also be used as a handle to easily carry the light. When in operation, if the battery charge settles at or below 10%, the bottom LED will flash in red to indicate the low level of charge. Outbound charging devices will decrease estimated run times for the light. 6. USE OUTPUT CHARGING PORT The protective cover keeps the ports and indicator safe from any damaging elements. To open, gently lift outward from the bottom. Resistance to water is reduced when the protective cover is in the open position. Keep this unit away from water when the protective cover is in the open position. Bright33 ® is a subsidiary of Stream33 Products LLC 350 Courtney Road, Sebring, Ohio 44672 USA Toll Free: 1-800-316-2532 www.bright33.com © 2018 Stream33 Products LLC. All rights reserved. Rev. 180622 5 1 2 3 4 6 5

Upload: others

Post on 18-Mar-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RECHARGEABLE LED WORK LIGHT · BRIGHT33® RECHARGEABLE LED WORK LIGHT H MODEL: B33WL10W T R CARE AND USE INSTRUCTIONS, .: e s e: s ) g r r , s r . A: IMPORTANT INFORMATION: For indoor

BRIGHT33® RECHARGEABLE LED WORK LIGHT

1. POWER SWITCH

MODEL: B33WL10W

3. CHARGING POWER INPUT

2. PROTECTIVE COVER

CARE AND USE INSTRUCTIONS

Allow the work light to cool down before cleaning. Once the work light is cool to the touch, clean it with a soft cloth and non-abrasive cleaner.

CARE & CLEANING:

• Charge one hour after each use• If work light is not used for a long time, apply one hour charging every three months• Store in cool place and avoid sun exposure

MAINTENANCE:

Bright33® warrants its light emitting diode (LED) fixtures, including the LED arrays and the LED drivers and integral control devices to be free from defect in material and workmanship for a period of two (2) years from the date of purchase. This warranty covers defects in manufacturing discovered while using the product as recommended by the manufacturer and does not apply tofailures caused by acts of God or as a result of any abuse, misuse, abnormal use, or use in violation of any applicable standard, code, or instructions for use in installations. If a Light Fixture fails due to a defect covered by this warranty, Stream33 Products LLC will replace the product. To make a warranty claim first call Stream33 Products LLC at 844-481-5004 to report the defect. Return the failed products with proof of purchase, your name, and address to the following address within thirty (30) days of the failure.

Stream33 Products LLC, 350 Courtney Road, Sebring, Ohio 44672 USA

LIMITED 2 YEAR WARRANTY:

IMPORTANT INFORMATION:For indoor and outdoor use. This is not a toy.

LED

The power switch has three settings: High (1100 lumens), Low (550 lumens), and Off.

Press the switch once for High, again for Off. Press again for Low and one more time to turn it Off.

The switch will cycle as follows: High-Off-Low-Off

The USB port is compatible with any outbound USB cable.*To begin outbound charging, first plug the USB end of the cable into the port, and then plug the other end into your device. Press the Battery Charge Level Indicator Button(white round button next to battery charge level indicator) to engage outbound power.

When in use, the Battery Charge Level Indicator lights will illuminate and flash, displaying the amount of charge the light battery has reserved.

*cable not included

Using the charger provided, connect the power cable into the charging port, and plug the charging adapter into a wall outlet or other power source.

To use the light with continuous A/C power, simply connect the power cable as described above and plug it into any A/C power source. (Using the light with A/C power simultaneously charges the batteries.)

Keep this unit away from water when charging or running on A/C power. Unplug from charger when using outdoors.

Use only the provided A/C charger when charging this light. Use of an incorrect charger may damage the light.

4. BATTERY CHARGE LEVEL INDICATOR

Press the white button next to battery charge level indicator. The LED lights below the button will illuminate for three seconds, indicating the battery charge level:

• Battery charged to low level: one green LED turns on• Battery charged to mid level: two green LEDs turn on• Battery charged to high level: three green LEDs turn on

5. ROTATING STAND AND HANDLE

The built-in stand pivots away from the light, providing support at any angle. When fully rotated to the top, the stand can also be used as a handle to easily carry the light. When in operation, if the battery charge settles at or below 10%, the bottom LED will flash in red to indicate the low level of charge. Outbound charging devices will decrease estimated run times for the light.

6. USE OUTPUT CHARGING PORT

The protective cover keeps the ports and indicator safe from any damaging elements. To open, gently lift outward from the bottom.

Resistance to water is reduced when the protective cover is in the open position.Keep this unit away from water when the protective cover is in the open position.

Bright33® is a subsidiary of

Stream33 Products LLC350 Courtney Road, Sebring, Ohio 44672 USA

Toll Free: 1-800-316-2532

www.bright33.com

© 2018 Stream33 Products LLC. All rights reserved.

Rev. 180622

5

12

3

4

6

5