recirculating coolers

Recirculating Coolers - Basic type

Low Temp. Recirculating Coolers - General Type

Low Temp. Recirculating Coolers - Intelligent type

Recirculating Coolers(Chillers)

Selection GuideRecirculating Cooler

DescriptionWorking Temp.

Range (℃ / ℉)

Cooling capacity at 10℃ [Kw]

Pump (50Hz)

PageMax. flow rate (L / min, gal / min)

Max. pressure (bar / psi)

Basic type

HX-20

+3 to 40 / +37.4 to 104

1.438 / 10.03 1.58 / 22.92

72

HX-25 1.7HX-20H 1.4

45 / 11.89 4.3 / 62.37HX-25 H 1.7HX-35H 3.1HX-45H 3.6HX-55H 5.1

General type (Low temp.)

HL-05

-20 to 40 / -4 to 104

0.50

50 / 13.2 1.0 / 14.5

74

HL-10 0.60 HL-15 1.15 HL-20 1.50 HL-15H 1.15

40 / 10.57 2.8 / 40.6HL-20H 1.15 HL-25H 1.80 HL-35H 2.30 HL-45H 4.50

70 / 18.49 6 / 87.0HL-55H 6.00

Intelligent type (Low temp.)

HS-15

-20 to 40 / -4 to 104

1.15

40 / 10.57 2.8 / 40.6

76

HS-20 1.50 HS-25 1.80 HS-35 2.30 HS-45 4.50 HS-55 6.00 HS-25H 1.80

70 / 18.49 6 / 87.0HS-35H 2.30 HS-45H 4.50 HS-55H 6.00

Accessories & OptionsDescription Page

for Recirculating Cooler 78 - 79

Safety functions1) Self - protecting cut-off function and signal : - For over temperature, the power supply is

automatically cut from the heater and controller systematically before the unit shuts down.

- Over - current Circuit breaker for user safety.

2) Low fluid level and dry - running protection : - Intermittent tone alert sounds and optical

signals alarms display on the control panel.

3) Double service valve provided to prevent ref-rigerant leakage.

Optimum control performance1) Functional LCD (resolution 0.1℃) keypad type

display : Designed to simplify operation with a VFD touch screen type display (HL / HS-series)

- Self-diagnostic function identifies equipment errors.

- Recognizable and convenient keypad . - Clear and easy-to-use LCD display.

2) Bright LED water level indicator

3) Pump pressure gauge

4) Run, compressing, pumping visual indicator

5) Eco-friendly R-404A or R507 refrigerant

6) Hot gas by-pass (only HL/HS series)

Ideal construction1) High quality #304 grade stainless steel inner

chamber and dirt repellent powder coated external surface.

2) Stainless steel submerged parts are resistant to corrosion against all usual bath fluids.

3) Pump pressure can be controlled using a bypass function. (only for HX-H type)

4) Removable gridded vent for reducing condenser contamination and to facilitate cleanliness.

5) A wide (Ø120mm / 4.72″) solution inlet is for easy and safe pouring of solution.

6) Wheels allow for easy mobility.

7) Computer Interface. (only HS series)

8) Warning alarm/monitoring system. - Over temperature. - Lack of bath solutions.

9) Pressure gauge comes standard with recirculating units to provide fluid system diagnostics at a glance and for observing the pump pressure.

Technical Benefits

General ApplicationsGeneral Applications

Recirculating CoolersHX-Series HL/HS-Series

AAS • •Autoclaves • •Calorimeters •CCM cameras •Combinatorial chemistry •Cooling of peltier elements •Diffusion pumps • •Distillation apparatus • •Dosing and gluing techniques •Drying of gas •Electrophoresis chambers • •Gas chromatographs •General industries • •General laboratory apparatus • •Lasers •Mass spectrometers • •Mills and kneaders •NMR • •Pilot plants • •Plastic industries • •Reaction vessels • •Rotary evaporators • •SEM •Semiconductor industries • •Soxhlet installation •Spectrometers • •Vacuum systems • •

* General purpose use and applications.

72


Providing a constant temperature control and high cooling efficiency.

Operating cost can be reduced by using the recirculator for cooling water. It is eco-friendly and reduces energy consumption.

Operating features • Control temperature range is from 3℃~40℃.

• Clear and easy-to-use LCD display. (resolution 0.1℃)

• Bright LED water level indicator can be seen from a distance.

• Low fluid level and dry-running protection when triggered shows an error symbol on the display and an audible buzzer sound.

• If the equipment operates at 40℃ or above due to the external environment, user can simply identify the error with a visual signal or an audible buzzer sound.

• Pump pressure can be controlled using a by-pass function. (only H type)

Constructional features • The refrigerating system is designed to reduce energy consumption

and to maximize in refrigerating efficiency.

• Eco-friendly R-404A refrigerant is used to prevent environmental pollution. Double service valve is used to prevent refrigerant leakage.

• Removable gridded vent for reducing condenser contamination and to facilitate cleanliness.

• A plastic solution inlet is for easy and safe pouring of solution into the chiller unit.

• Pressure gauge comes standard with chiller units to provide fluid system diagnostics at a glance and for observing the pump pressure.

• Wheels allow for easy mobility throughout the lab.

• The beautifully designed chiller is compact.

• Different types of pumps and valves come standard with the chiller to provide versatility.

• Variety of accessories are available to meet user’s different lab environment needs. (refer to accessories)

Testing in accordance with DIN EN 12876Optional Accessories •Fittings,Adapters

see page 78-79 •Tubing,Insulations •Tubeclamps •Bathfluid

Recirculating Coolers (Chillers)

LCD Display

Pressure Gauge Level Indicator

73

Pumping Capacities (Bath fluid : water)

Centrifugal Magnetic

Specifications & Ordering Informations

Model HX-20 HX-25 HX-20H HX-25H HX-35H HX-45H HX-55H

Temperature1)

(bath fluid : water)

Working temperature range (℃ / ℉)

+3 to 40 / +37.4 to 104

Temperature stability at 15℃ (±℃ / ℉)

1 / 1.8

Cooling capacity (bath fluid : water)

at20℃ (kW) 1.9 2.4 1.9 2.4 3.6 4.7 7.1at10℃ (kW) 1.4 1.7 1.4 1.7 3.1 3.6 5.1at5℃ (kW) 1.0 1.4 1.0 1.4 2.4 2.9 4.2

PumpMax. flow rate(L / min, gal / min) 38 / 10.03 38 / 10.03 45 / 11.89 45 / 11.89 45 / 11.89 45 / 11.89 45 / 11.89

Max. pressure (bar / psi) 1.58 / 22.92 1.58 / 22.92 4.3 / 62.37 4.3 /62.37 4.3 /62.37 4.3 / 62.37 4.3 / 62.37

Dimension

Max. filling capacity(L / cu ft) 35 / 1.24 35 / 1.24 35 / 1.24 35 / 1.24 45 / 1.59 45 / 1.59 45 / 1.59

For tubing dia(mm / inch) 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79

Overall(W×L×H, mm / inch)

610×670×970 /24.0×26.4×38.2

740×730×1065 /29.1×28.7×41.9

Net weight (kg / lbs) 93 / 205 101 / 223 97 / 214 105 / 231 120 / 265 130 / 287 140 / 309Electrical Requirements (220V, 60Hz) 8.5A 9A 9A 9.5A 15ACat. No. AAA64011 AAA64021 AAA64111 AAA64121 AAA64131 - -Electrical Requirements (230V, 50Hz) 7A 7.6A 10.5A 11A 17ACat. No. AAH64012K AAH64022K AAH64112K AAH64122K AAH64132K - -Electrical Requirements (120V, 60Hz)

Cat. No. AAH64013U AAH64023U - - - - -Electrical Requirements (380V, 60Hz) 10A 11.5ACat. No. - - - - - AAA64149 AAA64159Electrical Requirements (380V, 50Hz) 7A 8.5ACat. No. - - - - - AAH64148K AAH64158K

1)Technicaldata(accordingtoDIN12876)

*Abovespeificationvalueisrecordedby50Hz.2)OnlyHX-45H,55Hisrecordedby380V,60Hz.

*Theperformancevaluesreferto+20℃(68℉) ambienttemperature.*Productperformancemaybeaffectedbyambienttemperatures.



74


Powerful recirculating coolers, the HL series provide a wide range of cooling capacities with temperature reliability. Innovative control system, with a dynamic pumping capacity, and ideal for external temperature applications. Broad range of models to choose from based on working temperature range.

Testing in accordance with DIN EN 12876Optional Accessories •Fittings,Adapters

see page 78-79 •Tubing,Insulations •Tubeclamps •Bathfluid


Operating features • Temperature range is from -20℃~40℃.

• Bright LED water level indicator can be easily identified.

• Low fluid level and dry-running protection when triggered shows an error symbol on the display and an audible sound.

• If the equipment operates at 40℃ or above due to the external environment, user can simply identify the error with a visual or an audible sound.

• Designed to simplify operation with a touch screen type display. - Easy-to-read VFD display with interactive touch keys. - Setting and resolution indication 0.1℃/℉. - Quick keypad lock prevents accidental parameter changes. - Signal indicator for operation status.


and to maximize in refrigerating efficiency.

• Eco-friendly R-404A / R507 refrigerant is used to prevent enviro-nmental pollution. Double service valve is used to prevent refrigerant leakage.


• A wide (Ø120mm / 4.72″) solution inlet is for easy and safe pouring of solution into the recirculating cooler.

• Pressure gauge comes standard for observing the pump pressure

• The refrigeration system can be observed easily to diagnostic at a glance by high / low pressure gauges. (HL-25H, 35H, 45H, 55H models)

• Wheels allow for easy mobility.

• The beautifully designed and compact.

• Different types of pumps come standard with the recirculating cooler to provide versatility.

• Warning alarm/monitoring system. - Over temperature. - Lack of bath solutions.

• Variety of accessories is available to meet user’s different lab environment needs. (Refer to accessories)

75

Pumping Capacities (Bath fluid : Ethtylene glycol mix 1:1 Water)

Submersible pump

0

0.6

0.4

0.2

0.8

1.0

1.2

1.4

10 20 30 40 50 60

Flow rate (L/min)

60Hz

60Hz

50Hz

50Hz

50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

0

0.6

0.4

0.2

0.8

1.0

1.2

1.4

10 20 30 40 50 60

Flow rate (L/min)

60Hz

60Hz

50Hz

50Hz

50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

0

0.6

0.4

0.2

0.8

1.0

1.2

1.4

10 20 30 40 50 60

Flow rate (L/min)

60Hz

60Hz

50Hz

50Hz

50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)


Model HL-05 HL-10 HL-15 HL-20 HL-15H HL-20H HL-25H HL-35H HL-45H 2) HL-55H 2)

Temperature 1) (bath fluid : Ethtylene glycol mix 1:1 Water)

Working Temperature range (℃ / ℉)

-20 to 40 / -4 to 104

Temperature stability at 15℃, (±℃ / ℉)

1 / 1.8

Cooling capacity (bath fluid : Ethtylene glycol mix 1:1 Water)

at 20℃ (kw) 0.60 0.70 1.45 1.80 1.45 1.80 2.50 3.30 6.50 7.10

at 10℃ (kw) 0.50 0.60 1.15 1.50 1.15 1.50 1.80 2.30 4.50 6.00

at 0℃ (kw) 0.35 0.42 0.86 1.15 0.86 1.15 1.10 1.70 3.00 4.10

at -10℃ (kw) 0.18 0.32 0.62 0.85 0.62 0.85 0.65 1.00 2.10 2.50

at -20℃ (kw) 0.04 0.14 0.30 0.40 0.30 0.40 0.40 0.55 1.20 1.50

Pump

Max. flow rate (L / min, gal / min) 50 / 13.2 40 / 10.57 70 / 18.49

Max. pressure (bar / psi) 1.0 / 14.5 2.8 / 40.6 6 / 87.0

Dimension

Max,. filling capacity (L, cu ft) 10 / 0.35 15 / 0.53 15 / 0.53 25 / 0.88 40 /1.41

For tubing dia (mm / inch) 12.7 / 0.5 20 / 0.79

Overall (WxLxH, mm / inch)

400×545×690 / 15.7×21.5×27.2

510×640×715 / 20.1×25.2×28.1

510×640×715 / 20.1×25.2×28.1

550×850×1100 / 21.7×33.5×43.3

600×1000×1300 / 23.6×39.4×39.4

Net weight (kg / Ibs)62.85 / 138.6

64.85/ 143.0

86.5 / 190.7

87.35 /192.9

91.8 / 202.4

92.65 / 204.3

141.3 / 310.9

146.3 /321.9

171 ±10 /377 ±22

176 ±10 / 388 ±10

Electric requirement (230V, 60Hz) 5.0A 5.5A 6.5A 7.5A 6.5A 7.5A 9.5A 13.5A

Cat. No. AAH65001 AAH65011 AAH65021 AAH65031 AAH65121 AAH65131 AAH65141 AAH65151 - -

Electric requirement (230V, 50Hz) 4.5A 5.0A 6.0A 7.0A 6.0A 7.0A 7.5A 12.5A

Cat. No. AAH65002 AAH65012 AAH65022 AAH65032 AAH65122 AAH65132 AAH65142 AAH65152 - -

Electric requirement (120V, 60Hz) 10.0A 11.0A 13.0A 15.0A

Cat. No. AAH65003 AAH65013 AAH65023 AAH65033 - - - - - -

Electric requirement (380V, 60Hz) 5.5A 7.0A

Cat. No. - - - - - - - - AAH65169 AAH65179

Electric requirement (380V, 50Hz) 5.0A 6.0A

Cat. No. - - - - - - - - AAH65168 AAH65178


*Abovespeificationvalueisrecordedby50Hz.2)OnlyHL-45H,55Hisrecordedby380V,60Hz.




• HL - 05, 10, 15, 20 models • HL - 15H, 20H, 25H, 35H models • HL - 45H, 55H models

76

Low Temp. Recirculating Coolers - Intelligent Type

Adjustable, precise PID temperature controller beneficial for various cooling tasks, for use in the science, research, and industrial laboratories.Innovative and exclusive controller can be adjusted the cooling capacity from 1% to 100%

Operating features • Temperature range is from -20℃~40℃. • As an option an external sensor can be directly installed into the

cooling circuit for monitoring and regulating of temperatures. • Precise temperature stability ± 0.2℃ (at 15℃) without heater. • Bright LED water level indicator can be easily identified. • Low fluid level and dry-running protection when triggered shows

an error symbol on the display and an audible sound. • If the equipment operates at 40℃ or above due to the external

environment, user can simply identify the error with a visual or an audible sound.

• Designed to simplify operation with a touch screen type display. - Easy-to-read VFD display with interactive touch keys - Setting and resolution indication 0.1℃/℉ - Quick keypad lock prevents accidental parameter changes - Signal indicator for operation status


and to maximize in refrigerating efficiency. • Available external temperature sensor (Pt 100) for measured value • Computer Interface -Software provided -Save data in excel format -Storage of program information, backup of value settings/recovery,

and temperature values -RS-232C comes standard • Eco-friendly R-404A / R507 refrigerant is used to prevent enviro-

nmental pollution. Double service valve is used to prevent refrigerant leakage.


• A wide (Ø120mm / 4.72″) solution inlet is for easy and safe pouring of solution into the recirculating cooler.

• Pressure gauge comes standard for observing the pump pressure • The refrigeration system can be observed easily to diagnostic at a

glance by high / low pressure gauges. (HL-25H, 35H, 45H, 55H models)

• The beautifully designed and compact. • Different types of pumps come standard with the recirculating

cooler to provide versatility • Warning alarm/monitoring system - Over temperature - Lack of bath solutions

• Variety of accessories is available to meet user’s different lab env-ironment needs. (Refer to accessories)


Digital controllor

RS-232 Serial port & etc

77

0 10 20 30 40 50

Flow rate (L/min)

50Hz, 60Hz 50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

0 10 20 30 40 50

Flow rate (L/min)

50Hz, 60Hz 50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

Pumping Capacities (Bath fluid : water)

Submersible pump


Model HS-15 HS-20 HS-25 HS-35 HS-45 HS-55 HS-25H HS-35H HS-45H HS-55H

Temperature 1) (bath fluid : Ethtylene glycol mix 1:1 Water)

Working Temperature range (℃ / ℉)

-20 to 40 / -4 to 104

Temperature stability at 15℃, (±℃ / ℉)

0.2 / 0.36

Cooling capacity (bath fluid : Ethtylene glycol mix 1:1 Water)

at 20℃ (kw) 1.45 1.80 2.50 3.30 6.50 7.10 2.50 3.30 6.50 7.10

at 10℃ (kw) 1.15 1.50 1.80 2.30 4.50 6.00 1.80 2.30 4.50 6.00

at 0℃ (kw) 0.86 1.15 1.10 1.70 3.00 4.10 1.10 1.70 3.00 4.10

at -10℃ (kw) 0.62 0.85 0.65 1.00 2.10 2.50 0.65 1.00 2.10 2.50

at -20℃ (kw) 0.30 0.40 0.40 0.55 1.20 1.50 0.40 0.55 1.20 1.50

Pump

Max. flow rate (L / min, gal / min) 40 / 10.57 70 / 18.49

Max. pressure (bar / psi) 3.3 / 47.86 6 / 87.0

Dimension

Max. filling capacity (L, cu ft) 15 / 0.53 25 / 0.88 40 / 1.41 25 / 0.88 40 / 1.41

For tubing dia (mm / inch) 20 / 0.79

Overall (W×L×H, mm / inch)

510×640×715 / 20.1×25.2×28.1

550×850×1100 / 21.7×33.5×43.3

600×1000×1300 / 23.6×39.4×39.4

550×850×1100 / 21.7×33.5×43.3

600×1000×1300 / 23.6×39.4×39.4

Net weight (kg / Ibs)91.8 / 202.4

92.65 / 204.3

141.3 / 310.9

146.3 / 321.9

168 ±10 / 370 ±22

173±10 / 381 ±22

144.3 / 317.5

149.3 / 328.5

171 ±10 / 377 ±22

176 ±10 / 388 ±22

Electric requirement (230V, 60Hz) 6.5A 7.5A 9.5A 13.5A 9.5A 13.5A

Cat. No. AAH66011K AAH66021K AAH66031K AAH66041K - - AAH66131K AAH66141K - -

Electric requirement (230V, 50Hz) 6.0A 7.0A 7.5A 12.5A 7.5A 12.5A

Cat. No. AAH66012K AAH66022K AAH66032K AAH66042K - - AAH66132K AAH66142K - -

Electric requirement (380V, 50 / 60Hz) 5.5A 7.0A 5.5A 7.0A

Cat. No. - - - - AAH66058K AAH66068K - - AAH55158K AAH66168K


*Abovespeificationvalueisrecordedby50Hz.2)OnlyHS-45H,55Hisrecordedby380V,60Hz.


Low Temp. Recirculating Coolers - Intelligent Type


• HS-15, 20, 25, 35, 45, 55 models • HS-25H, 35H, 45H, 55H models

78

Barbed fittings Barbed fitting systems are geared for quick connecting of various size type tubes using pipe fittings, tube fittings, and hose fittings without tools.

Cat. No. DescriptionHXE1066 3/4”Maletobarbedfittingfortubing1”innerdiaHXE1067 3/4”Maletobarbedfittingfortubing3/4”innerdiaHXE1068 3/4”Maletobarbedfittingfortubing5/8”innerdiaHXE1069 3/4”Maletobarbedfittingfortubing1/2”innerdiaHXE1070 3/4”Maletobarbedfittingfortubing3/8”innerdia

AAA64501 1”BarbedfittingssetwithBallvalveAAA64502 3/4”BarbedfittingssetwithBallvalveAAA64503 5/8”BarbedfittingssetwithBallvalveAAA64504 1/2”BarbedfittingssetwithBallvalveAAA64505 3/8”BarbedfittingssetwithBallvalveAAA64506 1”BarbedfittingssetwithGatevalveAAA64507 3/4”BarbedfittingssetwithGatevalveAAA64508 5/8”BarbedfittingssetwithGatevalveAAA64509 1/2”BarbedfittingssetwithGatevalveAAA64510 3/8”BarbedfittingssetwithGatevalve

Connectors / AdaptersCat. No. DescriptionHXE1105 3/4”Maleto3/4”FemaleHXE1106 3/4”Maleto5/8”FemaleHXE1107 3/4”Maleto1/2”FemaleHXE1108 3/4”Maleto3/8”FemaleHXE1109 3/4” Male to 3/4” MaleHXE1110 3/4” Male to 5/8” MaleHXE1111 3/4” Male to 1/2” MaleHXE1112 3/4” Male to 3/8” Male

One touch adapters set Connect and exchange rigid tubing easily.

Cat. No. DescriptionHXE1075 12mmOnetouchadapter id9.0mm,od12.0mmHXE1076 10mmOnetouchadapter id6.5mm,od10.0mmHXE1077 8mmOnetouchadapter id5.5mm,od8.0mmHXE1078 6mmOnetouchadapter id4.0mm,od6.0mm

AAA64531 12mmAdapterssetwithBallvalveAAA64532 10mmAdapterssetwithBallvalveAAA64533 8mmAdapterssetwithBallvalveAAA64534 6mmAdapterssetwithBallvalve

Flexible fittings Stainless tubing designed for superior flexibility and with good chemical resistance.

Cat. No. DescriptionHXE1071 3/4”Maleto3/4”FlexiblefittingHXE1072 3/4”Maleto1/2”Femalewith1/2”Maleto1/2”Flexiblefitting

AAA64521 3/4”FlexiblefittingssetwithBallvalveAAA64522 1/2”FlexiblefittingssetwithBallvalveAAA64523 3/4”FlexiblefittingssetwithGatevalveAAA64524 1/2”FlexiblefittingssetwithGatevalve

Accessories & Options for Recirculating Coolers

Barbed fittings Connectors / Adapters Flexible fittings One touch adapters set

Recirculating Coolers


79

TubingCat. No. DescriptionHXE1079 1m12mmUrethanetubing id9.0mm,od12.0mmHXE1080 1m10mmUrethanetubing id6.5mm,od10.0mmHXE1081 1m8mmUrethanetubing id5.5mm,od8.0mmHXE1082 1m6mmUrethanetubing id4.0mm,od6.0mmHXE1083 1m1”PVCtubingwiththread id25.0mm,od31.0mmHXE1084 1m3/4”PVCtubingwiththread id19.0mm,od24.0mmHXE1085 1m5/8”PVCtubingwiththread id16.0mm,od20.5mmHXE1086 1m1/2”PVCtubingwiththread id12.0mm,od16.0mmHXE1087 1m3/8”PVCtubingwiththread id10.0mm,od14.0mmHXE1088 1m1”PVCtubingwithwire id25.0mm,od33.0mmHXE1089 1m3/4”PVCtubingwithwire id19.0mm,od26.0mmHXE1090 1m5/8”PVCtubingwithwire id15.0mm,od22.0mmHXE1091 1m1/2”PVCtubingwithwire id12.0mm,od18.0mmHXE1092 1m3/8”PVCtubingwithwire id9.0mm,od15.0mm

Tubing insulations EPDM insulation is used to reduce heat loss and condensation from cold water plumbing, chilled water, and refrigeration lines.

Cat. No. DescriptionHXE1093 EPDMInsulation,16mminnerdia.(9T)HXE1094 EPDMInsulation,19mminnerdia.(9T)HXE1095 EPDMInsulation,25mminnerdia.(9T)HXE1096 EPDMInsulation,28mminnerdia.(9T)HXE1097 EPDMInsulation,35mminnerdia.(9T)

Flexible tubingCat. No. DescriptionHXE1073 3/4”Flexibletubing(sus304,m)

HXE1074 1/2”Flexibletubing(sus304,m)

Tube clampsCat. No. DescriptionHXE1098 1”ClampHXE1099 3/4”Clamp

HXE1100 5/8”Clamp

HXE1101 1/2”ClampHXE1102 3/8”Clamp

Distributing fittings Distributing fittings connect even with small tubes with barb fittings.

Cat. No. DescriptionAAA64541 3-Waydistributingbarbedfittingsset(1/4”)AAA64542 3-Waydistributingbarbedfittingsset(3/8”)

Tubing Tubing insulations Tube clamps Distributing fittings


Accessories & Options for Recirculating CoolersRecirculating Coolers

Bath fluid Are bath fluids that may be suitable to use with the recirculating

cooler, in place of water.

Cat. No. DescriptionHXE1113 Distilledwater(20L)HXE1114 Ethyleneglycol(4L)HXE1115 Ethyleneglycol(20L)

External Sensor (only HS series) External temperature sensor (Pt 100) for measured value.

Cat. No. DescriptionCFA1943 3mcableforPt100sensor

recirculating coolers

Documents