Reconfigurable ComputingS. Reda, Brown University

Reconfigurable Computing(EN2911X, Fall07)

Lecture 07: Verilog (3/3)

Prof. Sherief RedaDivision of Engineering, Brown University

http://ic.engin.brown.edu

Reconfigurable ComputingS. Reda, Brown University

Behavioral modeling

• Last lecture we started behavioral modeling Focus on synthesizable subset of Verilog Understood the difference between always and initial Understood the difference between blocking and nonblocking assignments

Explained event-based control timing Explained conditional statements: if and else Explained multi-way branching: case Explained looping statements: while, for and repeat

Reconfigurable ComputingS. Reda, Brown University

Hierarchical naming

• As described, every module instance, signal, or variable is identified with an identifier.• Each identifier has a unique place in the design hierarchy.• Hierarchical name referencing allows us to denote every identifier in the design hierarchy

with a unique name.• A hierarchical name is a list of identifiers separated by dots “.” for each level of hierarchy• Examples: stimulus.q, stimulus.m1.Q, stimulus.m1.n2

Reconfigurable ComputingS. Reda, Brown University

Named blocks• Blocks can be given names

– Local variables can be declared from the names block– Variables in a named block can be accessed by using

hierarchical name referencing– Named blocks can be disabled

…alwaysbegin : block1 integer i; i=1;…end…alwaysbegin : block2 integer j; j = block1.i^1; end

Reconfigurable ComputingS. Reda, Brown University

Disabling named blocks

• The keyword disable provides a way to terminate the execution of a named block.

• Disable can be used to get out of loops, handle error conditions, or control execution of pieces of code based on control signal

• Disabling a block causes the execution control to be passed to the statement immediately succeeding the block

initialbegin i=0; flag=8’b0010_0101; begin: block1 while (i < 16) begin if (flag[i]) disable block1; i = i+1; endend

Reconfigurable ComputingS. Reda, Brown University

Tasks and functions

• Often it is required to implement the same functionality at many times in a behavioral design.

• Verilog provides tasks and functions to break up large behavioral code into smaller pieces.

• Tasks and functions are included in the design hierarchy. Like named blocks, tasks and functions can be addressed by means of hierarchical names.

• Tasks have input, output and inout arguments• Functions have input arguments• Tasks and functions are included in the design hierarchy. Like

named blocks, tasks or functions can be addressed by means of hierarchical names

Reconfigurable ComputingS. Reda, Brown University

Tasks• Tasks are declared with the keywords task

and endtask.• Tasks can have input, inout, and output

arguments to pass values (different than in modules).

• Tasks or functions can have local variables but cannot have wires.

• Tasks and functions can only contain behavioral statements.

• Tasks and functions do not contain always or initial statements but are called from always blocks, initial blocks, or other tasks and functions.

• Can operate directly on reg variables defined in the module

module ……always begin BOP (AB_AND, AB_OR, AB_XOR, A, B); BOP (CD_AND, CD_OR, CD_XOR, C, D);end

task BOP;output [15:0] ab_and, ab_or, ab_xor;input [15:0] a, b;begin

ab_and = a & b;ab_or = a | b;ab_xor = a ^ b;

endendtask…endmodule

Reconfigurable ComputingS. Reda, Brown University

Difference between module and task instantiation• Instantiated modules create duplicate

copies in hardware.

• In contrast tasks are static in nature. All declared items are statically allocated and they are shared across all uses of the task.

• If a task is called form within a behavioral block, only one copy is needed

• However, a task/function might be called concurrently form different behavioral blocks, which can lead to incorrect operation → avoid by using the automatic keyword to make a task re-entrant

module ……always BOP (AB_AND, AB_OR, AB_XOR, A, B);

always BOP (CD_AND, CD_OR, CD_XOR, C, D);

task automatic BOP;output [15:0] ab_and, ab_or, ab_xor;input [15:0] a, b;begin

ab_and = a & b;ab_or = a | b;ab_xor = a ^ b;

endendtask…endmodule

Reconfigurable ComputingS. Reda, Brown University

Functions• Functions are typically used for

combinational modeling (use for conversions and commonly used calculations.

• Need at least one input argument but cannot have output or inout arguments.

• The function is invoked by specifying function name and input arguments, and at the end execution, the return value is placed where the function was invoked

• Functions cannot invoke other tasks; they can only invoke other functions. Recursive functions are not synthesizable

module ……reg [31:0] parity;

always @(addr)begin parity = calc_parity(addr);end

// you can declare C sytlefunction calc_parity;input [31:0] address;begin calc_parity = ^address;endendfunction…endmodule

Reconfigurable ComputingS. Reda, Brown University

Example: clock display on DE2

• Last lecture we had a simple example of a 1 second blinking LED• Let’s generalize it to a clock display

seconds

HEX1 HEX0

minutes

HEX3 HEX2

Reconfigurable ComputingS. Reda, Brown University

Task to display digits

task digit2sev(input integer digit, output [6:0] disp);begin if (digit == 0) disp = 7'b1000000; else if (digit == 1) disp = 7'b1111001; else if (digit == 2) disp = 7'b0100100; else if (digit == 3) disp = 7'b0110000; else if (digit == 4) disp = 7'b0011001; else if (digit == 5) disp = 7'b0010010; else if (digit == 6) disp = 7'b0000011; else if (digit == 7) disp = 7'b1111000; else if (digit == 8) disp = 7'b0000000; else if (digit == 9) disp = 7'b0011000;endendtask

Reconfigurable ComputingS. Reda, Brown University

One way module clock(CLOCK_50, HEX0, HEX1, HEX2, HEX3);output reg [6:0] HEX0, HEX1, HEX2, HEX3;input CLOCK_50; integer count=0;reg [3:0] d1=0, d2=0, d3=0, d4=0;

always @(posedge CLOCK_50)begin count=count+1; if (count == 50_000_000) begin count=0; d1 = d1+1; if(d1 == 10) begin

d1 = 0; d2 = d2+1;if(d2 == 6) begin d2 = 0; d3 = d3 + 1; if(d3 == 10) begin d3 = 0; d4 = d4 + 1; if(d4 == 6) d4 = 0; endend

end digit2sev(d1, HEX0); digit2sev(d2, HEX1); digit2sev(d3, HEX2); digit2sev(d4, HEX3); endend

task digit2sev;…endtask

endmodule

Reconfigurable ComputingS. Reda, Brown University

Resource utilization is 152 LEs

Reconfigurable ComputingS. Reda, Brown University

Second codemodule clock(CLOCK_50, HEX0, HEX1, HEX2, HEX3);input CLOCK_50;output reg [6:0] HEX0, HEX1, HEX2, HEX3;integer count=0;reg [15:0] ticks=16'd0;reg [5:0] seconds=6'd0, minutes=6'd0;

initial display_time(seconds, minutes);

always @(posedge CLOCK_50)begin count = count+1; if (count == 50_000_000) begin count=0; ticks = ticks + 1; seconds = ticks % 60; minutes = ticks / 60; display_time (seconds, minutes); endend

Reconfigurable ComputingS. Reda, Brown University

task display_time(input [5:0] s, input [5:0] m);begin digit2sev(s%10, HEX0); digit2sev(s/10, HEX1); digit2sev(m%10, HEX2); digit2sev(m/10, HEX3);endendtask

task digit2sev(input integer digit, output [6:0] disp);begin if (digit == 0) disp = 7'b1000000; else if (digit == 1) disp = 7'b1111001; else if (digit == 2) disp = 7'b0100100; else if(digit == 3) disp = 7'b0110000; else if(digit == 4) disp = 7'b0011001; else if(digit == 5) disp = 7'b0010010; else if(digit == 6) disp = 7'b0000011; else if(digit == 7) disp = 7'b1111000; else if(digit == 8) disp = 7'b0000000; else if(digit == 9) disp = 7'b0011000;endendtaskendmodule

HEX3 HEX2 HEX1 HEX0

Reconfigurable ComputingS. Reda, Brown University

Resource utilization for 2nd code

• Circuit consumes 611 LEs (2% of the chip logic resources). • You have to be careful! Changing ticks, seconds and minutes to

integer increases area to become 2500 LEs (8% of the utilization)