RED RHINO 5020 SERIES MINI CRUSHER

TECHNICAL SPECS Crusher: Single toggle jaw crusher, 14% manganese steel reversible’ jaws. Engine: Yanmar 3 cylinder water cooled diesel. Fuel Consumption: Approximately 3 litres per hour (at 2600 rpm). Chassis: Hydraulic rubber tracks. Jaw Aperture: 500mm x 200mm. Output: 15 -20 tonnes per hour depending on loading and material. Fuel Capacity: 43 litres. Output Size: Instant hydraulic adjustment, choice of 10mm – 100mm. Control System: Manual hydraulic levers. Unique: Hydraulic reversible jaw action, reversible jaw plates (2 ‘lives’).

Options: Motorised or non motorised conveyor mounted screener

attachment (for separation of fines/soil).

Travel: Camera and monitor for forward visibility when moving.

DIMENSIONS

Red Rhino Crushers (UK) Ltd, Alma Park Road, Alma Park Industrial Estate, Grantham, Lincs. NG31 9SE

Tel: 01476 590 790 Fax: 01476 593 821 Email: info@redrhinocrushers.com

www.redrhinocrushers.com

Length: 5250mm Width: 1180mm Total Height: 2020mm Loading Height: 2050mm Weight: 2750kgs (subject to specification)

RED RHINO 5020 SERIES MINI CRUSHER

Red Rhino Crushers (UK) Ltd, Alma Park Road, Alma Park Industrial Estate, Grantham, Lincs. NG31 9SE

Tel: 01476 590 790 Fax: 01476 593 821 Email: info@redrhinocrushers.com

www.redrhinocrushers.com

Description: Single toggle jaw crusher with a jaw aperture of 500mm x 200mm – this crusher will crush a UK kerbstone in approximately 30 seconds. The 5020 series is 1180mm wide and can enter sites where space and access is restricted. Instant hydraulic adjustable jaws allow a choice in output size, ranging from 10mm up to 100mm. Material: The 5020 series will crush concrete, kerbstones, paving slabs, bricks, tiles, blocks, stone, porcelain, flint, gravestones, etc. Output: Output will vary according to jaw setting, loading method, loading equipment, input material and familiarity of the loading operator. In excess of 15t per hour has been achieved. Jaws: The instant hydraulic adjustment lever allows for the quick release of material and adjustment of product size. A hydraulic ‘reverse’ action is also provided along with a hydraulic pressure relief valve.

Further safety features are fitted as standard. Jaw plates are made of 14% manganese steel which will ‘work- harden”. The jaws are reversible meaning that they have ‘2 lives’.

Reinforced Concrete & Steel: For reinforced concrete it is recommended that you protect your conveyor belt and crush this material having removed the conveyor. Removal of the output conveyor is quick and easy. Engine: The engine is a 31hp water cooled diesel set at 2600rpm. The engine is economical using red or white diesel. The fuel tank capacity is 43 litres, with a fuel consumption of approximately 6 litres per hour. Tracks & Controls: Tracks are rubber. Controls are simple and clearly labelled. A hydraulic oil cooler is fitted to ensure longer life of hydraulic equipment and for hotter climates. Conveyor & Dust Suppression: Dust suppression is fitted as standard and is by means of fine water spray nozzles, utilising standard domestic hose pressure. The output conveyor is simple in design with a moulded belt providing strength and durability. The conveyor system can be removed quickly. Loading: Maximum productivity is achieved by correct loading of the crusher. This is a steady feeding of the hopper, ensuring that the jaw or hopper is not overloaded, using a maximum 3t mini excavator with a maximum 18inch bucket. Optimum tonnage per hour is achieved by positioning the excavator directly in-line with the rear of the machine, and that the excavator operator has a clear line of sight with the jaw. Conveyor Mounted An optional conveyor mounted screener is available for the separation of dust / topsoil from the crushing process. Screener Attachment (Optional): Supplied with a 10mm mesh, the screener can also assist with the creation of decorative aggregates. Safety & Maintenance: There are two emergency stop buttons located to either side of the machine, and the front inspection cover is fitted with a cut-off switch. The engine cover is lockable and a central greasing point is fitted. Service intervals are every 250 hours.

Instant hydraulic jaw adjustment

(Choice of output size

10mm-100mm)

500mm x 200mm jaw aperture

Hydraulic reversible jaw

action

Powerful 31hp water cooled

diesel engine

Electric start with clear and

simple hydraulic controls.

Dust suppression fitted

as standard.

Easy to remove output

conveyor.

Quick release hydraulic

coupling (for additional

Conveyor Mounted

Screener Attachment) Single toggle jaw crusher with

14% manganese steel

‘reversible’ jaw plates.

Camera and screen for forward

visibility when moving.