reference catalogue - brunswick...

MAKE IT. WORK.

204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA [email protected]

REFERENCE CATALOGUE

2 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA

TABLE OF CONTENTS

SECTIONS GRADESROUND BARSQUARE BARFLAT BARANGLECHANNELBEAM

WIDE FLANGE BEAM STANDARD I-BEAM

TUBING ROUND HSS SQUARE HSS RECTANGULAR HSS ERW SQUARE & RECTANGULAR ROUND MECHANICAL ERW & DOM

PIPESHEETPLATECHECKER PLATEGALVANIZED SHEETSTAINLESS SHEET & PLATEALUMINUM SHEET & PLATEEXPANDED METALBAR GRATINGSAFETY GRATINGALL THREAD RODREINFORCING BARSDATA

IMPERIAL / METRIC CONVERSIONS HARDNESS CONVERSIONS USEFUL INFORMATION

0

PAGES 1 7 8 9 12 14 17

24

50545556575859606467696970

BRUNSWICKSTEEL.COM [email protected] 1

GRADES

ASTM A-53Standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless. This grade is suitable for forming, bending, and flanging. Grade B, the most common, has a minimum yield strength of 35,000 PSI.

ASTM A-516This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. The four grades offer excellent combinations of strength, weldability and toughness to permit designers flexibility in the design of pressure vessels coming under the jurisdiction of the ASME Pressure Vessel Code.

ASTM A-36One of the most familiar grades of steel having minimum physical properties specified. Still the accepted standard in the U.S. it is similar in properties to the more common 44W but with lower yield and tensile strengths. This grade is widely available in the form of hot rolled merchant bars, shapes, and plate steel.Yield Strength – 36,000 PSI minimumTensile Strength – 58 – 80,000 PSI

ASTM A-500 GRADE CThe most common U.S. standard specification for cold-formed, welded carbon steel Hollow Structural Sections (HSS).Yield Strength – 46,000 PSI minimumTensile Strength – 62,000 PSI minimum

ASTM A-572 GRADE 50Structural quality, high strength, low alloy steel. Used for structural steel shapes in the construction of bridges and building construction. Weldable by all of the standard methods.Yield Strength – 50,000 PSI minimumTensile Strength – 70 – 95,000 PSI


GRADES

ASTM A992 / A992MThis specification covers rolled steel structural shapes for use in building framing, bridges or for general structural purposes and replaces A36 and A572 grade 50. Weldable by all of the standard methods.Yield Strength – 50,000 PSI minimumTensile Strength – 65,000 PSI minimum

ASTM A-1011Standard specification for hot rolled sheets, commercial quality. No minimum physical properties are specified. Suitable for moderate forming and bending.Typical Yield Strength – 29,000 PSITypical Tensile Strength – 53,000 PSI

ASTM A-1008Standard specification for cold rolled sheet, commercial quality. No minimum physical properties are specified. Good formability.

ASTM A-526/527Standard specification for galvanized steel sheet commercial/lock forming quality. No minimum physical properties are specified. Good to excellent formability. Various coating weights (thicknesses of zinc) are produced.

ASTM A-242High strength low alloy steel plate (comparable to CSA G40.21-50A). Intended for applications requiring improved strength levels and increased resistance to atmospheric corrosion. Commonly known by the trade names ‘Corten’, ‘Dofascoloy’, ‘Stelcaloy’.Yield Strength – 50,000 PSI minimumTensile Strength – 70,000 PSI minimum

ASTM A-606Comparable in properties to the plate grade ASTM A-242, but produced in sheet thickness.


GRADES

COMMERCIAL QUALITYCommercial Quality (CQ) steel is ordinarily produced from killed or semi-killed steel and does not have a high degree of uniformity in chemical composition a nd mechanical properties. CQ steel is furnished when specific mechanical test values are not required and where surface imperfections are not objectionable. Typical Yield Strength – 30,000 PSITypical Tensile Strength – 50,000 PSI

AISI-C1018Standard “Garden Variety” cold finished bar grade intended for general use, such as shaping applications not requiring high strength. No minimum physical properties are specified. Generally available in rounds, squares, and flat bars.Typical Yield Strength – 54,000 PSITypical Tensile Strength – 64,000 PSI

AISI-C1045Widely stocked as precision ground shafting. Intended for applications requiring increased strength and improved dimensional tolerances. Typical Yield Strength – 77,000 PSITypical Tensile Strength – 91,000 PSI

AISI-C12L14Cold finished bar with the addition of lead to produce much improved machinability. Available primarily as round and hex bars. No minimum physical properties are specified.Typical Yield Strength – 60 – 75,000 PSITypical Tensile Strength – 70 – 85,000 PSI

AISI-C1144 STRESS RELIEVEDCold finished bar intended for applications requiring increased strength values. The sulfur content enhances machinability and it has excellent induction hardening properties. It is generally available as round bars. Welding is not recommended.Yield Strength – 100,000 PSI minimumTensile Strength – 125,000 PSI minimum


GRADES

CSA G40.21-44W (300W)The current Canadian standard for steel produced to meet minimum physical properties. Commonly available as hot rolled merchant bars, shapes, and plate steel. Designed to be used in typical welded applications.Yield Strength – 44,000 PSI minimumTensile Strength – 65 – 90,000 PSI

CSA G40.21-50W (350W)Similar in properties to the more common 44W, but with higher yield strengths. Limited availability in structural shapes and plate material. Widely used in production of Hollow Structural Sections (HSS).Yield Strength – 50,000 PSI minimumTensile Strength – 70 – 95,000 PSI

CSA G40.21-50A (350A)Comparable in physical properties to the 50W grade, but with additions to improve the steel’s atmospheric corrosion resistance while maintaining good weldability. Available primarily as plate.Yield Strength – 50,000 PSI minimumTensile Strength – 70 – 95,000 PSI

AR-200Abrasion resistant steel intended for low impact abrasion applications.Brinell Hardness – 180 – 200 Brinell

STRENX 700 Structural plate manufactured by SSAB intended for applications where its high strength permits weight savings to be made. This replaces similar products produced by various mills under a variety of names including T-1 Construction Alloy, CHT-100, QT-100.Yield Strength – 100,000 PSI minimumTensile Strength – 115,000 PSI minimum


GRADES

STRENX 900Structural plate manufactured by SSAB intended for applications where its high strength permits weight savings to be made. Similar to Strenx 700 but with higher minimum yield strengths.Yield Strength – 130,000 PSI minimum

HARDOX 450Wear plate manufactured by SSAB intended for applications requiring high abrasion resistance. Due to its high toughness, bending and welding properties, it can also be used as a load bearing plate. This replaces similar products produced by various mills under a variety of names including T-1 Abrasion Resistant, CHT-360/425, AR-360/425. Produced with a range of 425-475 Brinell Hardness.Typical Yield Strength – 175,000 PSITypical Tensile Strength – 190,000 PSI

HARDOX 500Wear plate manufactured by SSAB intended for applications requiring superior abrasion resistance. This steel is a unique combination of toughness and hardness similar to Hardox 450 but produced with a Brinell Hardness range of 450-540.Typical Yield Strength – 175,000 PSITypical Tensile Strength – 190,000 PSI

STAINLESS STEEL T304, T304LA widely used general purpose stainless steel. It is excellent for forming, drawing and welding, and provides good corrosion resistance without post-weld annealing. The extra low carbon of T-304L permits the use of this steel in corrosive service in the as-welded condition.Typical Yield Strength – 33,000 – 42,000 PSITypical Tensile Strength – 79,000 – 85,000 PSI


GRADES

STAINLESS STEEL T316, T316LSimilar to T304 and T304L but with the addition of molybdenum which greatly increases its corrosion resistance and its mechanical properties at elevated temperatures. The combination of corrosion resistance and high tensile strength, plus good cold forming and drawing properties makes T-316 suitable for a very wide range of applications.Typical Yield Strength – 30,000 – 42,000 PSITypical Tensile Strength – 75,000 – 84,000 PSI

ALUMINUM 5052-H32This alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and it is often used in high strength sheet metal work and marine components.Typical Yield Strength – 28,000 PSITypical Tensile Strength – 33,000 PSI

ALUMINUM 6061-T6This is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability.Typical Yield Strength – 41,000 PSITypical Tensile Strength – 44,000 PSI


ROUND BAR

1/8 dia.3/161/45/163/87/161/29/165/811/163/413/167/815/16

11 1/161 1/81 3/161 1/41 5/161 3/81 7/161 1/21 9/161 5/81 11/161 3/41 13/161 7/81 15/16

22 1/162 1/82 3/16 2 1/42 5/162 3/82 7/162 1/22 9/162 5/82 11/162 3/42 13/162 7/82 15/16

3 dia.3 1/163 1/83 3/16 3 1/43 5/163 3/83 7/163 1/23 5/83 11/163 3/43 7/83 15/16

44 3/16 4 1/44 7/164 1/24 3/44 15/16

55 1/4 5 7/165 1/25 3/45 15/16

6

7

88 1/48 1/28 3/4

99 1/49 1/2 1010 1/2

1111 1/2

12

13

.042

.094

.167

.261

.376

.511

.668

.8451.041.261.501.762.042.35

2.673.013.383.774.174.605.055.526.016.527.057.608.188.779.3910.02

10.6811.3612.0612.7813.5214.2815.0615.8616.6917.5318.4019.2820.1921.1222.0723.04

24.0325.0426.0727.1328.2029.3030.4131.5532.7135.0936.3137.5540.0941.40

42.7246.8248.2352.5854.0760.2465.09

66.7573.5978.9580.7888.2894.13

96.13

130.85

170.90181.80192.93204.45

216.30228.50241.00

267.00294.40

323.00353.00

384.53

451.00

Size (inches) Weight (lbs per ft.) Size (inches) Weight (lbs per ft.)


SQUARE BAR

1/8 sq.3/161/45/163/87/161/29/165/811/163/47/815/16

11 1/81 1/4

1 3/8 sq.1 1/21 5/81 3/41 7/8

22 1/42 1/22 3/4

33 1/43 1/23 3/4

4

.053

.120

.213

.332

.478

.651

.8501.081.331.611.912.602.99

3.404.305.31

6.437.658.9810.4111.95

13.6017.2121.2525.71

30.6035.9141.6547.81

54.40



FLAT BAR

1/8 x 1/4 3/8 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 5 6

3/16 x 5/16 3/8 1/2 5/8 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 5 6

1/4 x 5/16 3/8 1/2 5/8

1/4 x 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 4 4 1/2 5 6 8 10 12

5/16 x 3/8 1/2 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 5 6 8

3/8 x 1/2 5/8 3/4 7/8 1

.106

.159

.213

.266

.319

.372

.425

.478

.531

.638

.744

.850

.9561.0631.2751.4881.7002.1252.550

.199

.239

.319

.398

.478

.558

.638

.797

.9561.1161.2751.4341.5941.9132.2302.5503.1883.825

.266

.319

.425

.531

.638

.744

.8501.0631.2751.4881.7001.9132.1252.3382.5502.9753.4003.8254.2505.1006.8008.50010.200

.398

.531

.797

.9301.0631.3281.5941.8592.1252.3902.6563.1883.7194.2505.3136.3758.500

.638

.797

.9561.1161.275



FLAT BAR


3/8 x 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 4 1/2 5 6 8 10 12

1/2 x 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/4 3 1/2 4 4 1/2 5 6 8 10 12

5/8 x 3/4 7/8 1 1 1/4

5/8 x 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 3 3/4 4 5 5 1/2 6 8 10 12

3/4 x 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 4 4 1/2 5 6 6 1/2 8 10 12

7/8 x 1 1 1/2 2 3 4

1.5941.7531.9132.2312.5502.8693.1883.8254.4635.1005.7386.3757.65010.2012.75015.300

1.0631.2751.4881.7001.9132.1252.5502.9753.4003.8254.2505.1005.5255.9506.8007.6508.50010.20013.60017.00020.400

1.5941.8592.1252.656

3.1883.7194.2504.7815.3135.8446.3757.4387.9698.50010.62511.68812.75017.00021.25025.500

2.2312.5502.8693.1883.8254.4635.1005.7386.3757.0137.6508.92510.20011.47512.75015.30016.57520.40025.50030.600

2.9754.4635.9508.92511.900


FLAT BAR


7/8 x 5 6

1 x 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 3

1 x 3 1/2 4 4 1/2 5 5 1/2 6 8 10 11 12

1 1/4 x 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 8 10

1 1/2 x 1 3/4 2 2 1/2 3 3 1/2 3 3/4

4 5 6 8 8 1/2 10 12

1 3/4 x 2 2 1/2 3 3 1/2 4 5 1/2 6

2 x 2 1/2 2 3/4 3 3 1/2 3 3/4 4 5 6 8 10 12

2 1/2 x 3 4 5 6 3 x 3 1/2 4 6

14.87517.850

4.2504.6755.1005.9506.8007.6508.50010.200

11.90013.60015.30017.00018.70020.40027.20034.00037.40040.800

6.3757.4388.5009.56310.62512.75014.87517.00019.12521.25023.37525.50034.00042.500

8.92510.20012.75015.30017.85019.125

20.40025.50030.60040.80043.35051.00061.200

11.90014.87517.85020.82523.80032.72535.700

17.00018.70020.40023.80025.50027.20034.00040.80054.40068.00081.600

25.50034.00042.50051.000

35.70040.80061.200


EQUAL LEG ANGLE

Size SizeWeight(lbs per ft.)

Weight(lbs per ft.)

Thickness(inches)

Thickness(inches)

1/2 x 1/2

5/8 x 5/8

3/4 x 3/4

7/8 x 7/8

1 x 1

1 1/4 x 1 1/4

1 1/2 x 1 1/2

1 3/4 x 1 3/4

2 x 2

2 1/2 x 2 1/2

3 x 3

.38

.48

.59

.84

.701.00

.801.161.49

1.011.481.922.33

1.231.802.342.863.35

1.442.122.773.39

1.652.443.193.924.70

2.083.074.105.005.907.70

3.74.9

5/163/87/161/2

1/45/163/87/161/2

1/45/163/87/161/25/83/4

5/163/87/161/25/83/47/8

5/163/87/161/29/165/83/47/81

1/29/165/83/47/8111/8

1/8

1/8

1/83/16

1/83/16

1/83/161/4

1/83/161/45/16

1/83/161/45/163/8

1/83/161/45/16

1/83/161/45/163/8

1/83/161/45/163/81/2

3/161/4

3 x 3

3 1/2 x 3 1/2

4 x 4

5 x 5

6 x 6

8 x 8

6.17.28.39.4

5.87.28.59.811.1

6.68.29.811.312.815.718.5

10.312.314.316.220.023.627.2

12.414.917.219.621.924.228.733.137.4

26.429.332.738.945.051.056.9


UNEQUAL LEG ANGLE

Size SizeWeight(lbs per ft.)

Weight(lbs per ft.)

Thickness(inches)

Thickness(inches)

2 x 1 1/2

2 1/2 x 2

3 x 2

3 x 2 1/2

3 1/2 x 2 1/2

3 1/2 x 3

4 x 3

4 x 3 1/2

1.442.122.773.36

1.862.753.624.505.30

3.074.105.005.906.807.70

3.74.55.66.68.5

3.74.96.17.28.39.4

5.46.67.99.110.2

5.87.28.59.811.113.6

6.27.79.110.611.9

5/8

1/45/163/87/161/2

1/45/163/87/161/25/83/4

5/163/81/2

1/45/163/87/161/29/165/83/47/81

3/81/2

7/161/29/165/83/47/81

7/161/29/165/83/47/81

1/83/161/45/16

1/83/16 1/45/163/8

3/161/45/163/87/161/2

3/161/45/163/81/2

3/161/45/163/87/161/2

1/45/163/87/161/2

1/45/163/87/161/25/8

1/45/163/87/161/2

4 x 3 1/2

5 x 3

5 x 3 1/2

6 x 3 1/2

6 x 4

7 x 4

8 x 4

8 x 6

14.7

6.68.29.811.312.8

7.08.710.412.013.616.819.8

9.811.715.3

8.310.312.314.316.218.120.023.627.230.6

13.617.9

17.219.621.924.228.733.137.4

20.223.025.728.533.839.144.2


STEEL CHANNEL


3/4 x 3/8 x 1/8

1 x 1/2 x 1/8

1 1/4 x 1/2 x 1/8

1 1/2 x 1/2 x 1/8

1 1/2 x 9/16 x 3/16

1 1/2 x 3/4 x 1/8

2 x 1/2 x 1/82 x 5/8 x 3/16

2 x 5/8 x 1/4

2 x 9/16 x 3/16

2 x 1 x 1/8

2 x 1 x 3/16

2 1/2 x 5/8 x 3/16

.54

.84

1.00

1.12

1.44

1.17

1.431.47

2.28

1.86

1.59

2.32

2.27


FLANGE

WIDTH

WEB

DE

PT

H

STANDARD CHANNEL

C3 x 3.5 x 4.1 x 5.0 x 6.0

C4 x 4.5 x 5.4 x 6.25 x 7.25

C5 x 6.7 x 9.0 x 11.5

C6 x 8.2 x 10.5 x 13.0

C7 x 9.8 x 12.25 x 14.75

C8 x 11.5 x 13.75 x 18.75

C9 x 13.4 x 15.0 x 20.0

C10 x 15.3 x 20.0 x 25.0 x 30.0

C12 x 20.7 x 25.0 x 30.0

C15 x 33.9 x 40.0 x 50.0

3.00

4.00

5.00

6.00

7.00

8.00

9.00

10.00

12.00

15.00

.273

.273

.273

.273

.296

.296

.296

.296

.320

.320

.320

.343

.343

.343

.366

.366

.366

.390

.390

.390

.413

.413

.413

.436

.436

.436

.436

.501

.501

.501

.650

.650

.650

C75 x 5 x 6 x 7 x 9

C100 x 7 x 8 x 9 x 11

C130 x 10 x 13 x 17

C150 x 12 x 16 x 19

C180 x 15 x 18 x 22

C200 x 17 x 21 x 28

C230 x 20 x 22 x 30

C250 x 23 x 30 x 37 x 45

C310 x 31 x 37 x 45

C380 x 50 x 60 x 74

1.361.411.501.60

1.521.581.651.72

1.751.882.03

1.922.032.16

2.092.192.30

2.262.342.53

2.432.482.65

2.602.742.893.03

2.943.053.17

3.403.523.72

.125

.170

.258

.356

.145

.184

.247

.321

.190

.325

.472

.200

.314

.437

.210

.314

.419

.220

.303

.487

.233

.285

.448

.240

.379

.526

.673

.282

.387

.510

.400

.520

.716

Imperial Depth (inches)

Flange Thickness (mean, inches)

Metric Flange Width (inches) Web Thickness (inches)


MISCELLANEOUS CHANNEL

MC 3 x 7.1 MC 4 x 13.8 MC 6 x 6.5 x 7.0 x 12.0 x 15.1 x 15.3 x 16.3 x 18.0 MC 7 x 17.6 x 19.1 x 22.7 MC 8 x 6.6 x 8.5 x 18.7 x 20.0 x 21.4 x 22.8 MC 9 x 23.9 x 25.4 MC 10 x 6.5 x 8.4 x 22.0 x 25.0 x 28.5 x 33.6 x 41.1 MC 12 x 10.60 x 31.0 x 35.0 x 40.0 x 45.0 x 50.0 MC 13 x 27.3 x 31.8 x 35.0 x 40.0 x 50.0 MC18 x 42.7 x 45.8 x 51.9 x 58.0

3.0

4.0

6.06.06.06.06.06.06.0

7.07.07.0

8.08.08.08.08.08.0

9.09.0

10.010.010.010.010.010.010.0

12.012.012.012.012.012.0

13.013.013.013.013.0

18.018.018.018.0

0.350

0.500

0.2900.2900.3800.4800.3900.4800.480

0.4800.5000.500

0.2600.3100.5000.5000.5300.530

0.5500.550

0.2000.2800.5750.5750.5750.5750.575

0.3100.7000.7000.7000.7000.700

0.6100.6100.6100.6100.610

0.6250.6250.6250.625

MC 75 x 10.6

MC 100 x 20.6 MC 150 x 9.7 x 10.4 x 17.9 x 22.5 x 22.8 x 24.3 x 26.8

MC 175 x 26.2 x 28.5 x 33.8

MC 200 x 9.8 x 12.7 x 27.9 x 29.8 x 31.9 x 34.0

MC 230 x 35.6 x 37.8

MC 250 x 9.7 x 12.5 x 33.0 x 37.0 x 42.4 x 50.0 x 61.2

MC 310 x 15.8 x 46.0 x 52.0 x 60.0 x 67.0 x 74.0 MC 330 x 40.7 x 47.3 x 52.0 x 60.0 x 74.0

MC 460 x 63.5 x 68.2 x 77.2 x 86.0

1.940

2.500

1.8501.8802.5002.9403.5003.0003.500

3.0003.4503.600

1.7501.8702.9803.0303.4503.500

3.4503.500

1.1301.5003.3153.4104.3214.1003.950

1.5003.6703.7653.8904.0104.135

3.8904.0004.0724.1854.412

3.9504.0004.1004.200

0.310

0.500

0.1600.1800.3100.3200.3400.3800.380

0.3800.3500.500

0.1400.1800.3500.4000.3800.430

0.4000.450

0.1500.1700.2900.3800.4250.5750.796

0.1900.3700.4650.5900.7100.935

0.2700.3750.4470.5600.787

0.4500.5000.6000.700

Imperial Flange Thickness (mean, inches)


Depth (inches)


FLANGE

WIDTH

WEB

DE

PT

H

W4 x 13

W5 x 16 x 19

W6 x 8.5 x 9 x 12 x 16

W6 x 15 x 20 x 25

W8 x 10 x 13 x 15

W8 x 14 x 18 x 21

W8 x 24 x 28

W8 x 31 x 35 x 40 x 48 x 58 x 67

W10 x 12 x 15 x 17 x 19

W10 x 16 x 22 x 26 x 30

W10 x 33 x 39 x 45

4.16

5.015.15

5.835.906.036.28

5.996.206.38

7.897.998.11

7.988.148.28

7.938.06

8.008.128.258.508.759.00

9.879.9910.1110.24

9.9510.1710.3310.47

9.739.9210.10

.345

.360

.430

.194

.215

.280

.405

.260

.365

.455

.205

.255

.315

.250

.330

.400

.400

.465

.435

.495

.560

.685

.810

.935

.210

.270

.330

.395

.250

.360

.440

.510

.435

.530

.620

W100 x 19

W130 x 24 x 28

W150 x 13 x 14 x 18 x 24

W150 x 22 x 30 x 37

W200 x 15 x 19 x 22

W200 x 21 x 27 x 31

W200 x 36 x 42

W200 x 46 x 52 x 59 x 71 x 86 x 100

W250 x 18 x 22 x 25 x 28

W250 x 24 x 33 x 39 x 45

W250 x 49 x 58 x 67

4.06

5.005.03

3.943.944.004.03

5.996.026.08

3.944.004.02

5.215.255.27

6.506.54

8.008.028.078.118.228.28

3.964.004.014.02

5.715.755.775.81

7.967.988.02

.280

.240

.270

.170

.170

.230

.260

.230

.260

.320

.170

.230

.245

.195

.230

.250

.245

.285

.285

.310

.360

.400

.510

.570

.190

.230

.240

.250

.195

.240

.260

.300

.290

.315

.350

WIDE FLANGE BEAM (W)






W10 x 49 x 54 x 60 x 68 x 77 x 88 x 100 x 112

W12 x 14 x 16 x 19 x 22

W12 x 21 x 26 x 30 x 35

W12 x 40 x 54 x 50

W12 x 53 x 58

W12 x 65 x 72 x 79 x 87 x 96 x 106 x 120 x 136 x 152 x 170 x 190 x 210 x 230

W14 x 22 x 26

W14 x 30 x 34 x 38

9.9810.0910.2210.4010.6010.8411.1011.36

11.9111.9912.1612.31

12.0412.2212.3412.50

11.9412.0612.19

12.0612.19

12.1212.2512.3812.5312.7112.8913.1213.4113.7114.0314.3814.7115.05

13.7413.91

13.8413.9814.10

.560

.615

.680

.770

.870

.9901.1201.250

.225

.265

.350

.425

.290

.380

.440

.520

.515

.575

.640

.575

.640

.605

.670

.735

.810

.900

.9901.1001.2501.4001.5601.7401.9002.070

.335

.420

.385

.455

.515

W250 x 73 x 80 x 89 x 101 x 115 x 131 x 149 x 167

W310 x 21 x 24 x 28 x 33

W310 x 31 x 39 x 45 x 52

W310 x 60 x 67 x 74

W310 x 79 x 86

W310 x 97 x 107 x 118 x 129 x 143 x 158 x 179 x 202 x 226 x 253 x 283 x 313 x 342

W360 x 33 x 39

W360 x 45 x 51 x 57

10.0010.0310.0810.1310.1910.2610.3410.42

3.973.994.004.03

6.456.496.526.56

8.008.048.08

10.0010.01

12.0012.0412.0812.1212.1612.2212.3212.4012.4812.5712.6712.7912.90

5.005.02

6.736.746.77

.340

.370

.420

.470

.530

.605

.680

.755

.200

.220

.235

.260

.195

.230

.260

.300

.295

.335

.370

.345

.360

.390

.430

.470

.515

.550

.610

.710

.790

.870

.9601.0601.1801.290

.230

.255

.270

.285

.310



Depth (inches)



W14 x 43 x 48 x 53

W14 x 61 x 68 x 74 x 82

W14 x 90 x 99 x 109 x 120 x 132

W14 x 145 x 159 x 176 x 193 x 211 x 233 x 257 x 283 x 311 x 342 x 370 x 398 x 426

W14 x 455 x 500 x 550 x 605 x 665 x 730

W16 x 26 x 31

W16 x 36 x 40 x 45 x 50 x 57

13.6613.7913.92

13.8914.0414.1714.31

14.0214.1614.3214.4814.66

14.7814.9815.2215.4815.7216.0416.3816.7417.1217.5417.9218.2918.67

19.0219.6020.2420.9221.6422.42

15.6915.88

15.8616.0116.1316.2616.43

.530

.595

.660

.645

.720

.785

.855

.710

.780

.860

.9401.030

1.0901.1901.3101.4401.5601.7201.8902.0702.2602.4702.6602.8403.040

3.2103.5003.8204.1604.5204.910

.345

.440

.430

.505

.565

.630

.715

W360 x 64 x 72 x 79

W360 x 91 x 101 x 110 x 122

W360 x 134 x 147 x 162 x 179 x 196

W360 x 216 x 237 x 262 x 287 x 314 x 347 x 382 x 421 x 463 x 509 x 551 x 592 x 634

W360 x 677 x 744 x 818 x 900 x 990 x 1086

W410 x 39 x 46

W410 x 54 x 60 x 67 x 74 x 85

8.008.038.06

10.0010.0410.0710.13

14.5214.5614.6014.6714.72

15.5015.5615.6515.7115.8015.8916.0016.1116.2316.3616.4816.5916.70

16.8417.0117.2017.4217.6517.89

5.505.52

6.987.007.047.077.12

.305

.340

.370

.375

.415

.450

.510

.440

.485

.525

.590

.645

.680

.745

.830

.890

.9801.0701.1801.2901.4101.5401.6601.7701.880

2.0202.1902.3802.6002.8303.070

.250

.275

.295

.305

.345

.380

.430





W16 x 67 x 77 x 89 x 100

W18 x 35 x 40 x 46

W18 x 41 x 45 x 50 x 55 x 60 x 65 x 71

W18 x 76 x 86 x 97 x 106 x 119 x 130 x 143 x 158 x 175 x 192

W21 x 44 x 50 x 57

W21 x 48 x 55 x 62 x 68 x 73 x 83 x 93

W21 x 101 x 111 x 122 x 132 x 147 x 166

16.3316.5216.7516.97

17.7017.9018.06

17.7017.8617.9918.1118.2418.3518.47

18.2118.3918.5918.7318.9719.2519.4919.7220.0420.35

20.6620.8321.06

20.6220.8020.9921.1321.2421.4321.62

21.3621.5121.6821.8322.0622.48

.665

.760

.875

.985

.425

.525

.605

.425

.499

.570

.630

.695

.750

.810

.680

.770

.870

.9401.0601.2001.3201.4401.5901.750

.450

.535

.650

.430

.522

.615

.685

.740

.835

.930

.800

.875

.9601.0401.1501.360

W410 x 100 x 114 x 132 x 149

W460 x 52 x 60 x 68

W460 x 61 x 67 x 74 x 82 x 89 x 97 x 106

W460 x 113 x 128 x 144 x 158 x 177 x 193 x 213 x 235 x 260 x 286

W530 x 66 x 74 x 85

W530 x 72 x 82 x 92 x 101 x 109 x 123 x 138

W530 x 150 x 165 x 182 x 196 x 219 x 248

10.2410.3010.3610.42

6.006.026.06

7.457.487.507.537.567.597.64

11.0411.0911.1411.2011.2611.16011.22011.30011.37511.455

6.506.536.56

8.148.228.248.278.308.368.42

12.2912.3412.3912.4412.5112.42

.395

.455

.525

.585

.300

.315

.360

.320

.335

.355

.390

.415

.450

.495

.425

.480

.535

.590

.655

.670

.730

.810

.890

.960

.350

.380

.405

.350

.375

.400

.430

.455

.515

.580

.500

.550

.600

.650

.720

.750




Depth (inches)


W24 x 55 x 62

W24 x 56 x 61 x 68 x 76 x 84 x 94 x 103

W24 x 104 x 117 x 131 x 146 x 162 x 176

W27 x 84 x 94 x 102 x 114 x 129

W27 x 146 x 161 x 178 x 194

W30 x 90 x 99 x 108 x 116 x 124 x 132 x 148

W30 x 173 x 191 x 211 x 235

W33 x 118 x 130 x 141 x 152 x 169

23.5723.74

23.4623.5423.7323.9224.1024.3124.53

24.0624.2624.4824.7425.0025.24

26.7126.9227.0927.2927.63

27.3827.5927.8128.11

29.5329.6529.8330.0130.1730.3130.67

30.4430.6830.9431.30

32.8633.0933.3033.4933.82

.505

.590

.461

.500

.585

.680

.770

.875

.980

.750

.850

.9601.0901.2201.340

.640

.745

.830

.9301.100

.9751.0801.1901.340

.610

.670

.760

.850

.9301.0001.180

1.0601.1801.3101.500

.740

.855

.9601.0601.220

W610 x 82 x 92

W610 x 84 x 91 x 101 x 113 x 125 x 140 x 153

W610 x 155 x 174 x 195 x 217 x 241 x 262

W690 x 125 x 140 x 152 x 170 x 192

W690 x 217 x 240 x 265 x 289

W760 x 134 x 147 x 161 x 173 x 185 x 196 x 220

W760 x 257 x 284 x 314 x 350

W840 x 176 x 193 x 210 x 226 x 251

7.007.04

8.908.948.968.999.029.069.00

12.7512.8012.8612.9012.9612.89

9.969.9910.0210.0710.01

13.9614.0214.0814.04

10.4010.4510.4810.5010.5210.5410.48

14.9815.0415.1015.06

11.4811.5111.5411.5611.50

.395

.430

.355

.380

.415

.440

.470

.515

.550

.500

.550

.605

.650

.705

.750

.460

.490

.515

.570

.610

.605

.660

.725

.750

.470

.520

.545

.565

.585

.615

.650

.655

.710

.775

.830

.550

.580

.605

.635

.670






W33 x 201 x 221 x 241

W36 x 135 x 150 x 160 x 170 x 182 x 194 x 210

W36 x 231 x 247 x 262 x 282 x 302

W40 x 149 x 167 x 183 x 211 x 235 x 264 x 294 x 327

W40 x 174 x 199 x 215 x 249 x 277 x 297 x 324 x 362 x 372 x 397 x 431 x 503 x 593

W44 x 230 x 262 x 290 x 335

33.6833.9334.18

35.5535.8536.0136.1736.3336.4936.69

35.9036.0836.2636.5236.74

38.2038.6039.0039.4039.7040.0040.4040.80

38.238.739.039.439.739.840.240.640.641.041.342.143.0

42.943.343.644.0

1.1501.2801.400

.790

.9401.0201.1001.1801.2601.360

1.2601.3501.4401.5701.680

.8301.0251.2001.4151.5751.7301.9302.130

0.8301.0651.2201.4201.5751.6501.7702.0102.0452.2002.3602.7603.230

1.2201.4201.5801.770

W840 x 299 x 329 x 359

W920 x 201 x 223 x 238 x 253 x 271 x 289 x 313

W920 x 342 x 365 x 387 x 417 x 446

W1000 x 222 x 249 x 272 x 314 x 350 x 393 x 414 x 493

W1000 x 258 x 296 x 321 x 371 x 412 x 443 x 483 x 539 x 554 x 591 x 642 x 748 x 883

W1100 x 343 x 390 x 433 x 499

15.7415.8015.86

11.9511.9812.0012.0312.0812.1212.18

16.4716.5116.5516.6016.66

11.8111.8111.8111.8111.8911.9312.0112.13

15.75015.75015.75015.75015.83015.82515.91016.02016.06016.12016.22016.42016.690

15.75015.75015.83015.950

.715

.775

.830

.600

.625

.650

.680

.725

.765

.830

.760

.800

.840

.885

.945

.630

.650

.650

.750

.830

.9601.0601.180

0.6500.6500.6500.7500.8300.9301.0001.1201.1601.2201.3401.5401.790

0.7100.7900.8701.020




Depth (inches)


FLANGE

WIDTH

WEB

DE

PT

H

3” x 2.94” x 3.2

S3 x 5.7 x 7.5

S4 x 7.7 x 9.5

S5 x 10.0

S6 x 12.5 x 17.25

S8 x 18.4 x 23.0

S10 x 25.4 x 35.0

S12 x 31.8 x 35.0 x 40.8 x 50.0

S15 x 42.9 x 50.0

S18 x 54.7 x 70.00

S20 x 66.0 x 75.0 x 86.0 x 96.0

S24 x 80.0 x 90.0 x 100.0 x 106.0 x 121.0

3.004.00

3.003.00

4.004.00

5.00

6.006.00

8.008.00

10.0010.00

12.0012.0012.0012.00

15.0015.00

18.0018.00

20.0020.0020.3020.30

24.0024.0024.0024.5024.50

.125

.125

.260

.260

.293

.293

.326

.359

.359

.425

.425

.491

.491

.544

.544

.659

.659

.622

.622

.691

.691

.795

.795

.920

.920

.870

.870

.8701.0901.090

SuperlightSuperlight

S75 x 8 x 11

S100 x 11 x 14.1

S130 x 15

S150 x 19 x 26

S200 x 27 x 34

S250 x 38 x 52

S310 x 47 x 52 x 60.7 x 74

S380 x 64 x 74

S460 x 81.4 x 104

S510 x 98 x 112 x 128 x 143

S610 x 119 x 134 x 149 x 158 x 180

2.252.25

2.332.51

2.662.80

3.00

3.333.56

4.004.17

4.664.94

5.005.085.255.48

5.505.64

6.006.25

6.266.397.067.20

7.007.137.247.878.05

.125

.125

.170

.349

.193

.326

.214

.232

.465

.271

.441

.311

.594

.350

.428

.462

.687

.411

.550

.461

.711

.505

.635

.660

.800

.500

.625

.745

.620

.800

STANDARD I-BEAM (S)





1.050

1.315

1.660

1.690

1.900

2.000

2.375

2.875

3.000

3.500

3.750

4.000

4.500

1.021.241.60

1.301.59

1.672.05

1.702.09

2.102.382.813.45

2.032.503.64

2.433.013.574.405.68

3.685.407.01

3.845.667.35

6.668.6910.66

3.904.857.169.36

5.177.6710.0212.3414.52

5.858.6811.36

.313

.375

.125

.188

.250

.313

.375

.188

.250

.313

.125

.188

.250

.313

.375

.188

.250

.313

.375

.188

.250

.313

.375

.438

.500

.250

.313

.375

.438

.500

.250

.313

.375

.438

.500

.250

.313

.375

.438

.500

.250

.313

.375

.438

.500

.100

.125

.134

.100

.125

.100

.125

.100

.125

.110

.125

.150

.188

.100

.125

.188

.100

.125

.150

.188

.250

.125

.188

.250

.125

.188

.250

.188

.250

.313

.100

.125

.188

.250

.125

.188

.250

.313

.375

.125

.188

.250

4.500

5.000

5.562

6.000

6.625

8.625

10.750

12.750

14.000

16.000

14.0116.54

6.529.6712.6915.6918.54

10.8014.2017.60

7.5411.6815.3719.0322.55

13.0017.0021.1025.10

17.0022.4027.8033.1038.4043.40

28.1034.9041.6048.3054.80

33.4041.6049.6057.7065.50

36.8045.8054.7063.5072.20

42.1052.5062.7072.9082.90

O.D. (inches)

Weight(lbs per ft.)

Wall Thickness (inches)


O.D.(inches)

Weight(lbs per ft.)

ROUND STRUCTURAL TUBING (HSS)


O.D. (inches)

Weight(lbs per ft.)



O.D.(inches)

Weight(lbs per ft.)

1 x 1

1 1/4 x 1 1/4

1 1/2 x 1 1/2

2 x 2

2 1/4 x 2 1/4

2 1/2 x 2 1/2

3 x 3

3 1/2 x 3 1/2

4 x 4

1.141.35

1.481.78

1.822.213.05

2.583.064.335.41

2.843.484.966.26

3.263.915.617.11

3.954.766.898.8110.5912.17

5.618.1710.5112.7014.71

6.469.4512.2114.8317.2721.63

.125

.188

.250

.313

.375

.500

.188

.250

.313

.375

.188

.250

.313

.375

.500

.188

.250

.313

.375

.500

.188

.250

.313

.375

.500

.250

.313

.375

.500

.250

.313

.375

.500

.100

.125

.100

.125

.100

.125

.188

.100

.125

.188

.250

.100

.125

.188

.250

.100

.125

.188

.250

.100

.125

.188

.250

.313

.375

.125

.188

.250

.313

.375

.125

.188

.250

.313

.375

.500

5 x 5

5 1/2 x 5 1/2

6 x 6

7 x 7

8 x 8

10 x 10

12 x 12

7.8012.0015.6219.0822.3728.43

13.2817.3221.1824.92

14.5619.0223.3327.4835.24

17.1322.4227.6332.5842.05

19.6325.8231.8437.6948.85

32.6340.3547.9062.46

39.4348.8658.1076.07

SQUARE STRUCTURAL TUBING (HSS)


2 x 1

2 1/2 x 1 1/2

3 x 1

3 x 1 1/2

3 x 2

3 x 2 1/2

3 1/2 x 2

3 1/2 x 2 1/2

4 x 2

4 x 3

1.822.213.35

2.583.064.335.41

2.583.064.335.41

2.923.484.96

3.263.915.617.118.60

6.25

6.25

4.766.898.8110.59

4.766.898.8110.59

5.618.1710.5112.7014.71

.125

.188

.250

.313

.375

.188

.250

.313

.375

.125

.188

.250

.313

.375

.125

.188

.250

.313

.375

.125

.188

.250

.313

.375

.125

.188

.250

.313

.375

.188

.250

.313

.375

.500

.125

.188

.100

.125

.188

.100

.125

.188

.250

.100

.125

.188

.250

.100

.125

.188

.100

.125

.188

.250

.313

.188

.188

.125

.188

.250

.313

.125

.188

.250

.313

.125

.188

.250

.313

.375

5 x 2

5 x 2 1/2

5 x 3

5 x 4

6 x 2

6 x 3

6 x 4

7 x 2

5.618.1710.5112.7014.71

8.8111.4013.8016.00

6.469.4512.2114.8317.27

7.3110.7013.9116.9619.82

6.469.4512.2114.8317.27

7.3110.7013.9116.9619.82

12.0015.6219.0822.3728.43

7.3110.70

RECTANGULAR STRUCTURAL TUBING (HSS)

O.D. (inches)

Weight(lbs per ft.)



O.D.(inches)

Weight(lbs per ft.)


7 x 2

7 x 3

7 x 4

7 x 5

8 x 2

8 x 3

8 x 4

8 x 6

9 x 5

13.9116.9619.82

12.0015.6219.0822.37

13.2817.3221.1824.92

14.5619.0223.3327.4835.24

12.0015.6219.0822.37

13.2817.3221.1824.92

14.5619.0223.3327.4835.24

17.1322.4227.6332.5842.05

17.1322.42

.313

.375

.500

.188

.250

.313

.375

.500

.188

.250

.313

.375

.500

.188

.250

.313

.375

.500

.250

.313

.375

.500

.250

.313

.375

.500

.250

.313

.375

.250

.313

.375

.188

.250

.313

.375

.188

.250

.313

.375

.188

.250

.313

.375

.500

.188

.250

.313

.375

.188

.250

.313

.375

.188

.250

.313

.375

.500

.188

.250

.313

.375

.500

.188

.250

9 x 5

9 x 7

10 x 4

10 x 6

12 x 8

14 x 6

14 x 10

27.6332.5842.05

19.6325.8231.8437.6948.85

17.1322.4227.6332.5842.05

19.6325.8231.8437.6948.85

32.6340.3547.9062.46

32.6340.3547.9062.46

39.4348.8658.1076.07

RECTANGULAR STRUCTURAL TUBING (HSS)

O.D. (inches)

Weight(lbs per ft.)



O.D.(inches)

Weight(lbs per ft.)


1/2 x 1/2

5/8 x 5/8

3/4 x 3/4

7/8 x 7/8

1 x 1

1 1/8 x 1 1/8

1 1/4 x 1 1/4

1 1/4 x 1 1/4

1 3/8 x 1 3/8

1 1/2 x 1 1/2

1 5/8 x 1 5/8

1 3/4 x 1 3/4

1 7/8 x 1 7/8

.028

.035

.049

.065

.028

.035

.049

.065

.083

.095

.035

.049

.065

.083

.095

.035

.049

.065

.083

.095

.109

.035

.049

.065

.083

.095

.109

.120

.035

.049

.065

.083

.095

.109

.120

.035

.049

.065

.083

.095

.109

.120

.134

.035

.049

.065

.083

.095

.109

.120

.134

.035

.049

.065

.083

.095

.109

.120

.134

.035

.049

.065

.083

.095

.109

.120

.134

.035

.049

.065

.083

.095

.109

.120

.134

.035

.049

.065

.083

.18

.22

.30

.39

.23

.31

.43

.56

.70

.79

.36

.50

.65

.81

.92

.38

.53

.69

.86

.981.11

.45

.63

.821.031.171.331.45

.50

.69

.911.151.301.471.61

.59

.821.081.37

1.551.771.932.13

.62

.861.131.421.621.842.012.22

.69

.961.261.591.812.062.252.49

.751.021.341.701.932.202.412.67

.781.091.431.812.062.352.572.95

.851.161.561.98

22201816

222018161413

2018161413

201816141312

20181614131211

20181614131211

20181614

13121110

2018161413121110

2018161413121110

2018161413121110

2018161413121110

20181614

Size Wall WallWeight (per ft.)

Weight (per ft.)

Ga. Ga.Size

SQUARE ERW TUBING


1 7/8 x 1 7/8

2 x 2

2 1/8 x 2 1/8

2 1/4 x 2 1/4

2 1/2 x 2 1/2

3 x 3

3 1/2 x 3 1/2

4 x 4

.095

.109

.120

.134

.049

.065

.083

.095

.109

.120

.134

.049

.065

.083

.095

.109

.120

.134

.049

.065

.083

.095

.109

.120

.134

.049

.065

.083

.095

.109

.120

.134

.065

.083

.095

.109

.120

.134

.148

.083

.095

.109

.120

.134

.148

.083

.095

.109

.120

.134

.148

2.252.572.813.11

1.281.692.142.442.783.053.39

1.341.772.252.562.923.213.56

1.411.862.362.693.073.383.74

1.542.042.592.953.373.694.10

2.593.293.754.284.705.225.74

3.844.395.015.506.126.73

4.415.035.756.317.037.73

13121110

18161413121110

18161413121110

18161413121110

18161413121110

1614131211109

14131211109

14131211109

Size Wall WallWeight (per ft.)

Weight (per ft.)

Ga. Ga.Size

SQUARE ERW TUBING


RECTANGULAR ERW TUBING

1/2 x 1

1/2 x 1 1/2

3/4 x 1 1/2

3/4 x 1 3/4

1 x 1 1/2

1 x 2

1 1/4 x 2

1 1/2 x 2 1/2

1 1/2 x 3

.049

.065

.049

.065

.083

.065

.065

.065

.083

.049

.065

.083

.095

.065

.083

.065

.083

.47

.61

.63

.831.04

.94

1.05

1.051.32

.971.271.601.74

1.38

2.16

1.932.45

1816

181614

16

16

1614

18161413

16

14

1614

Size Wall Weight (per ft.)

Ga.


MECHANICAL TUBING (SEAMLESS, DOM, ERW)

0.250

0.313

0.375

0.500

0.563

0.625

0.688

0.1940.1800.152

0.2570.2430.2150.183

0.3190.3050.2770.2450.2090.135

0.4440.4300.4020.3840.3700.3340.2820.260

0.4930.4330.3970.323

0.5550.5270.5090.4950.4590.4070.3850.3570.3130.249

0.5580.5220.4980.470

XXX

XXXX

XXXXXX

XXXXXXXX

XXXX

XXXXXXXXXX

XXXX

0.0280.0350.049

0.0280.0350.0490.065

0.0280.0350.0490.0650.0830.120

0.0280.0350.0490.0580.0650.0830.1090.120

0.0350.0650.0830.120

0.0350.0490.0580.0650.0830.1090.1200.1340.1560.188

0.0650.0830.0950.109

0.0660.0800.105

0.0850.1040.1380.172

0.1040.1270.1710.2150.2590.327

0.1410.1740.2360.2740.3020.3700.4550.487

0.1970.3460.4250.568

0.2210.3010.3510.3890.4800.6010.6470.7030.7810.877

0.4320.5360.6020.674

XX

X

XX

XX

Outside Diameter (O.D.)

Inside Diameter (I.D.) DOMWall Thickness (inches)

Weight(per ft.)

ERW



0.688

0.750

0.813

0.875

1.000

0.448

0.6800.6520.6200.5840.5600.5320.5100.4820.4380.3740.3120.250

0.6830.6470.6230.5730.545

0.8050.7770.7590.7450.7090.6850.6570.6350.6070.5630.4990.3750.249

0.9300.9020.8700.8340.8100.7820.7600.7320.6880.624

X

XXXXXXXXXXXX

XXXXX

XXXXXXXXXXXXX

XXXXXXXXXX

0.120

0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.250

0.0650.0830.0950.1200.134

0.0350.0490.0580.0650.0830.0950.1090.1200.1340.1560.1880.2500.313

0.0350.0490.0650.0830.0950.1090.1200.1340.1560.188

0.728

0.2670.3670.4760.5910.6650.7460.8070.8820.9901.1281.2421.335

0.5190.6470.7280.8880.972

0.3140.4320.5060.5620.7020.7910.8920.9681.0601.1981.3791.6691.879

0.3610.4980.6490.8130.9181.0371.1281.2391.4061.630

XXXXX

X

X

XXX

XXXXXXX



Weight(per ft.)

ERW



1.000

1.065

1.125

1.188

1.250

0.5620.5000.3740.250

0.8990.8750.8470.8250.7530.6890.565

1.0551.0270.9950.9590.9350.9070.8850.8570.8130.7490.6870.6250.5630.499

1.0580.9480.8760.8120.7500.688

1.1801.1521.1201.0841.0601.0321.0100.9820.9380.874

XXX

XXXXXXX

XXXXXXXXXXXXXX

XXXXXX

XXXXXXXXX

0.2190.2500.3130.375

0.0830.0950.1090.1200.1560.1880.250

0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.313

0.0650.1200.1560.1880.2190.250

0.0350.0490.0650.0830.0950.1090.1200.1340.1560.188

1.8272.0032.2972.503

0.8700.9841.1131.2111.5141.7612.176

0.4070.5630.7360.9241.0451.1831.2881.4181.6141.8812.1192.3362.5332.714

0.7801.3691.7192.0082.2662.504

0.4540.6290.8231.0341.1721.3281.4481.5971.8232.132

XXXX

X

XXXXXXX



Weight(per ft.)

ERW



1.250

1.313

1.375

1.438

1.500

0.8120.7500.6240.500

1.0731.0451.0010.9370.8750.8130.6870.563

1.2771.2451.2091.1851.1571.1351.1071.0630.9990.9370.8750.8130.7490.625

1.1261.0621.0000.938

1.4301.4021.3701.3341.3101.2821.2601.2321.1881.1241.062

XXXX

XXXXXXXX

XXXXXXXXXXXXXX

XXXX

XXXXXXXXXXX

0.2190.2500.3130.375

0.1200.1340.1560.1880.2190.2500.3130.375

0.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.3130.375

0.1560.1880.2190.250

0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.219

2.4112.6703.1323.504

1.5291.6871.9282.2592.5592.8383.3433.757

0.6940.9091.1451.2991.4741.6081.7762.0312.3832.7043.0043.2833.5504.005

2.1362.5102.8513.172

0.5480.7590.9961.2561.4261.6191.7691.9552.2392.6342.996

XXXX

X

XXXXXXX



Weight(per ft.)

ERW



1.500

1.563

1.625

1.750

1.875

1.0000.9380.8740.7500.6240.500

1.3231.2511.0630.813

1.5271.4951.4591.4351.4071.3851.3571.3131.2491.1871.1251.0630.9990.8750.625

1.6521.6201.5841.5601.5321.5101.4821.4381.3741.3121.2501.1241.0000.750

1.7771.745

XXXX

XXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXX

XX

0.2500.2810.3130.3750.4380.500

0.1200.1560.2500.375

0.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.3130.3750.500

0.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.3130.3750.500

0.0490.065

3.3383.6583.9684.5064.9685.340

1.8492.3443.5064.758

0.8251.0831.3671.5221.7651.9292.1342.4472.8853.2893.6714.0334.3865.0066.008

0.8901.1701.4781.6791.9102.0892.3132.6563.1363.5814.0054.8045.5076.675

0.9561.257

XXXXXX

XXXX

X

XX



Weight(per ft.)

ERW



1.875

2.000

2.125

1.7091.6851.6571.6351.5631.4991.4371.3751.3131.2491.1250.9990.875

1.9301.9021.8701.8341.8101.7821.7601.7321.6881.6241.5621.5001.4381.3741.2501.1241.0000.8740.7500.500

2.0271.9951.9591.9351.8851.8131.7491.6871.6251.563

XXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXX

0.0830.0950.1090.1200.1560.1880.2190.2500.2810.3130.3750.4380.500

0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.750

0.0490.0650.0830.0950.1200.1560.1880.2190.2500.281

1.5891.8062.0562.2492.8643.3873.8734.3394.7845.2226.0086.7227.343

0.7351.0211.3431.6991.9332.2012.4092.6703.0723.6384.1664.6735.1595.6396.5087.3078.0108.6409.17810.013

1.0861.4301.8102.0602.5703.2813.8894.4585.0065.534

XX

XXXXXXX

XX



Weight(per ft.)

ERW



2.125

2.250

2.375

2.500

1.4991.3751.125

2.1522.1202.0842.0602.0101.9821.9381.8741.8121.7501.6881.6241.5001.3741.2501.1241.0000.750

2.2452.2092.1572.1352.0631.9991.9371.8751.7491.6251.3751.1250.875

2.3702.3342.3102.2822.2602.1882.1242.062

XXX

XXXXXXXXXXXXXX

XXXXXXXX

XXXXXXXX

0.3130.3750.500

0.0490.0650.0830.0950.1200.1340.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.750

0.0650.0830.1090.1200.1560.1880.2190.2500.3130.3750.5000.6250.750

0.0650.0830.0950.1090.1200.1560.1880.219

6.0577.0098.678

1.1521.5171.9212.1862.7303.0283.4894.1404.7505.3405.9096.4757.5098.4769.34510.14410.84712.015

1.6042.0322.6382.8903.6974.3915.0435.6746.8938.01010.01311.68113.016

1.6902.1432.4402.7833.0503.9054.6425.335

XX

X

XXXX

XXX

X



Weight(per ft.)

ERW



2.500

2.625

2.750

2.875

2.0001.9381.8741.7501.6241.5001.3741.2501.000

2.4952.4352.3852.2492.1251.9991.8751.7491.6251.3751.125

2.6202.5842.5602.5102.4382.3742.3122.2502.1882.1242.0001.8741.7501.6241.5001.2501.000

2.7452.6352.4992.4372.375

XXXXXXX

XXXXXXXXX

XXXXXXXXXXXXXXX

XXXX

0.2500.2810.3130.3750.4380.5000.5630.6250.750

0.0650.0950.1200.1880.2500.3130.3750.4380.5000.6250.750

0.0650.0830.0950.1200.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.7500.875

0.0650.1200.1880.2190.250

6.0086.6597.3118.5119.64610.68011.64712.51614.018

1.7772.5673.2104.8936.3417.7299.01110.23011.34813.35015.019

1.8642.3642.6943.3714.3225.1445.9206.6757.4108.1479.51210.81512.01513.15014.18416.02017.522

1.9513.5315.3956.2127.009

X

XX

X

XX



Weight(per ft.)

ERW



2.875

3.000

3.125

3.250

2.2492.1251.9991.8751.7491.625

2.9022.8702.8342.8102.7602.6882.6242.5622.5002.4382.3742.2502.1242.0001.8741.7501.5001.2501.000

2.8852.7492.6252.4992.3752.2492.1251.9991.8751.6251.375

3.1203.0843.0603.0102.9382.874

XXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXX

XXXXXX

0.3130.3750.4380.5000.5630.625

0.0490.0650.0830.0950.1200.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.7500.8751.000

0.1200.1880.2500.3130.3750.4380.5000.5630.6250.7500.875

0.0650.0830.0950.1200.1560.188

8.56410.01311.40012.68313.90215.019

1.5442.0372.5862.9473.6914.7385.6466.5057.3438.1608.98210.51311.98513.35014.65315.85318.02319.85821.360

3.8515.8977.6769.40011.01412.56914.01815.40516.88819.02421.026

2.2112.8073.2014.0115.1556.148

XXXXX

XXXX



Weight(per ft.)

ERW



3.250

3.500

3.625

3.750

2.7502.6882.6242.5002.3742.2502.1242.0001.7501.5001.250

3.3703.3343.3103.2603.1883.1243.0623.0002.9382.8742.7502.6242.5002.3742.2502.0001.7501.500

3.3853.2493.1252.9992.8752.7492.6252.3752.125

3.5103.3743.2503.124

XXXXXXXX

XXXXXXXXXXXXXXXXXX

XXXXXXXX

XXXX

0.2500.2810.3130.3750.4380.5000.5630.6250.7500.8751.000

0.0650.0830.0950.1200.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.7500.8751.000

0.1200.1880.2500.3130.3750.4380.5000.6250.750

0.1200.1880.2500.313

8.0108.9109.81811.51413.15414.68516.15717.52220.02522.19424.030

2.3853.0293.4554.3325.5716.6507.6748.6789.66010.65412.51614.32416.02017.66019.19122.02824.53126.700

4.4926.9019.01111.07113.01614.90816.68820.02523.029

4.6527.1529.34511.489

XXXX

X



Weight(per ft.)

ERW



3.750

3.875

4.000

4.125

4.250

3.0002.8742.7502.6242.5002.2502.0001.750

3.6353.4993.3753.1252.8752.6252.375

3.8703.8343.8103.7603.6243.5623.5003.3743.2503.1243.0002.8742.7502.5002.2502.0001.7501.500

3.6253.4993.3753.1252.875

4.1204.0604.010

XXXXX

XXXXXX

XXXXXXXXXXXXX

XXXXX

XXX

0.3750.4380.5000.5630.6250.7500.8751.000

0.1200.1880.2500.3750.5000.6250.750

0.0650.0830.0950.1200.1880.2190.2500.3130.3750.4380.5000.5630.6250.7500.8751.0001.1251.250

0.2500.3130.3750.5000.625

0.0650.0950.120

13.51715.49317.35519.16320.85924.03026.86729.370

4.8127.4039.67914.01818.02321.69425.031

2.7323.4723.9624.9737.6548.84310.01312.32514.51816.66218.69020.66622.52826.03329.20332.04034.54336.713

10.34612.74315.01919.35823.363

2.9054.2165.293

XXXX

XXX



Weight(per ft.)

ERW



4.250

4.500

4.625

4.750

3.8743.7503.6243.5003.3743.2503.0002.7502.5002.2502.0001.750

4.3704.3344.3104.2604.2324.1244.0624.0003.8743.7503.6243.5003.2503.0002.7502.5002.2502.0001.500

4.1253.9993.8753.625

4.5104.3744.2504.1244.0003.7503.500

XXXXXXX

XXXXXXXXXXXXX

XXXX

XXXXXXX

0.1880.2500.3130.3750.4380.5000.6250.7500.8751.0001.1251.250

0.0650.0830.0950.1200.1340.1880.2190.2500.3130.3750.4380.5000.6250.7500.8751.0001.1251.2501.500

0.2500.3130.3750.500

0.1200.1880.2500.3130.3750.5000.625

8.15610.68013.16115.51917.83220.02524.19728.03531.53934.71037.54740.050

3.0793.9154.4695.6136.2488.65810.01311.34813.99616.52119.00121.36025.86630.03833.87637.38040.55143.38848.060

11.68114.41417.02122.028

5.9349.16012.01514.83217.52222.69527.534

XXXX



Weight(per ft.)

ERW



4.750

5.000

5.250

5.500

3.2503.0002.7502.2501.750

4.8704.8344.7604.6244.5004.3744.2504.1244.0003.7503.5003.2503.0002.7502.5002.000

5.0104.8744.7504.6244.5004.2504.0003.7503.5003.2503.0002.7502.250

5.3705.3345.2605.1245.0004.8744.7504.624

XXXXXXXXXX

XXXXXXX

X

XXXXXX

0.7500.8751.0001.2501.500

0.0650.0830.1200.1880.2500.3130.3750.4380.5000.6250.7500.8751.0001.1251.2501.500

0.1200.1880.2500.3130.3750.5000.6250.7500.8751.0001.1251.2501.500

0.0650.0830.1200.1880.2500.3130.3750.438

32.04036.21240.05046.72552.065

3.4264.3596.2549.66212.68315.66818.52321.34024.03029.20334.04338.54842.72046.55850.06356.070

6.57510.16413.35016.50419.52425.36530.87236.04540.88445.39049.56253.40060.075

3.7734.8026.89510.66614.01817.33920.52623.679

XXX

XXX



Weight(per ft.)

ERW



5.500

5.750

6.000

6.250

4.5004.2504.0003.7503.5003.2503.0002.500

5.3745.2505.1245.0004.7504.5004.2504.0003.7503.2502.750

5.8705.8345.7825.7605.7325.6245.5005.3745.2505.0004.7504.5004.2504.0003.7503.5003.0002.5002.000

6.0105.8745.7505.500

XX

XXXXXX

XX

X XXXXXX

XXXX

0.5000.6250.7500.8751.0001.1251.2501.500

0.1880.2500.3130.3750.5000.6250.7500.8751.0001.2501.500

0.0650.0830.1090.1200.1340.1880.2500.3130.3750.5000.6250.7500.8751.0001.1251.2501.5001.7502.000

0.1200.1880.2500.375

26.70032.54138.04843.22148.06052.56656.73864.080

11.16814.68518.17521.52728.03534.20940.05045.55750.73060.07568.085

4.1205.2456.8587.5368.39511.67015.35319.01122.52829.37035.87842.05347.89353.40058.57363.41372.09079.43385.440

7.85612.17216.02023.529

XXXXX



Weight(per ft.)

ERW



6.250

6.500

6.625

6.750

7.000

5.2505.0004.7504.5004.2504.0003.7503.250

6.1246.0005.7505.5005.2505.0004.7504.5004.0003.5003.0002.500

6.4076.3856.3575.999

6.2506.0005.7505.5005.2505.0004.7504.2503.750

6.8706.8346.7826.7606.7326.6246.5006.250

XX

XXXXX

X

XXXX

X

XXX

0.5000.6250.7500.8751.0001.1251.2501.500

0.1880.2500.3750.5000.6250.7500.8751.0001.2501.5001.7502.000

0.1090.1200.1340.313

0.2500.3750.5000.6250.7500.8751.0001.2501.500

0.0650.0830.1090.1200.1340.1880.2500.375

30.70537.54744.05550.22956.07061.57766.75076.095

12.67316.68824.53132.04039.21646.05852.56658.74070.08880.10088.77896.120

7.5858.3379.28921.100

17.35525.53233.37540.88448.06054.90261.41073.42584.105

4.8146.1328.0228.8179.82613.67718.02326.533

XXX

XXXX



Weight(per ft.)

ERW



7.000

7.250

7.500

7.750

8.000

6.0005.7505.5005.2505.0004.7504.5004.0003.5003.000

6.7506.5006.2506.0005.7505.2505.0004.7504.250

7.1247.0006.7506.5006.2506.0005.5005.0004.5004.0003.500

7.3747.2507.0006.7506.5006.2505.7505.2504.750

7.8707.834

XXX

XXXXXX

XXXXXXX

XXXXX

0.5000.6250.7500.8751.0001.1251.2501.5001.7502.000

0.2500.3750.5000.6250.7501.0001.1251.2501.500

0.1880.2500.3750.5000.6250.7501.0001.2501.5001.7502.000

0.1880.2500.3750.5000.6250.7501.0001.2501.500

0.0650.083

34.71042.55350.06357.23864.08070.58876.76388.11098.123106.800

18.69027.53436.04544.22252.06566.75073.59280.10092.115

14.68119.35828.53637.38045.89154.06869.42083.43896.120107.468117.480

15.18320.02529.53738.71547.55956.07072.09086.775100.125

5.5087.018

XX



Weight(per ft.)

ERW



8.000

8.250

8.500

8.750

7.7827.7607.7327.6247.5007.2507.0006.7506.5006.2506.0005.7505.5005.0004.5004.0003.5003.000

7.7507.5007.2507.0006.7506.2506.0005.7505.250

8.0007.7507.5007.2507.0006.5006.0005.5005.0004.5003.500

8.0007.7507.2506.750

XXXXX

XXXXXX

XXXX

XXX

0.1090.1200.1340.1880.2500.3750.5000.6250.7500.8751.0001.1251.2501.5001.7502.0002.2502.500

0.2500.3750.5000.6250.7501.0001.1251.2501.500

0.2500.3750.5000.6250.7501.0001.2501.5001.7502.0002.500

0.3750.5000.7501.000

9.18610.09911.25715.68520.69330.53840.05049.22858.07366.58374.76082.60390.113104.130116.813128.160138.173146.850

21.36031.53941.38550.89760.07577.43085.60793.450108.135

22.02832.54142.72052.56662.07880.10096.788112.140126.158138.840160.200

33.54244.05564.08082.770

XXX



Weight(per ft.)

ERW



8.750

9.000

9.250

9.500

9.750

10.000

6.2505.7504.750

8.5008.2508.0007.7507.5007.0006.5006.0005.5005.0004.5004.0003.000

8.7508.5008.2508.0007.7507.2506.7506.250

9.0008.7508.5008.0007.5007.0006.5006.0005.500

9.2508.7508.2507.7507.2506.750

9.834

XXX

XXXX

XXX

XX

1.2501.5002.000

0.2500.3750.5000.6250.7501.0001.2501.5001.7502.0002.2502.5003.000

0.2500.3750.5000.6250.7501.0001.2501.500

0.2500.3750.5000.7501.0001.2501.5001.7502.000

0.2500.5000.7501.0001.2501.500

0.083

100.125116.145144.180

23.36334.54345.39055.90366.08385.440103.463120.150135.503149.520162.203173.550192.240

24.03035.54446.72557.57268.08588.110106.800124.155

24.69836.54648.06070.08890.780110.138128.160144.848160.200

25.36549.39572.09093.450113.475132.165

8.791 X



Weight(per ft.)

ERW



10.000

10.250

10.500

10.750

9.7829.7609.7329.6249.5009.2509.0008.5008.0007.7507.5007.0006.5006.0005.5005.0004.000

9.2508.7508.2507.7507.250

10.0009.7509.5009.0008.5008.0007.5007.0006.5005.5004.500

10.25010.0009.7509.2508.7508.2507.7507.2506.7506.2505.750

XXXX

X

XXX

XX

0.1090.1200.1340.1880.2500.3750.5000.7501.0001.1251.2501.5001.7502.0002.2502.5003.000

0.5000.7501.0001.2501.500

0.2500.3750.5000.7501.0001.2501.5001.7502.0002.5003.000

0.2500.3750.5000.7501.0001.2501.5001.7502.0002.2502.500

11.51412.66214.11919.70126.03338.54850.73074.09396.120106.633116.813136.170154.193170.880186.233200.250224.280

52.06576.09598.790120.150140.175

27.36840.55153.40078.098101.460123.488144.180163.538181.560213.600240.300

28.03541.55254.73580.100104.130126.825148.185168.210186.900204.255220.275

XXX



Weight(per ft.)

ERW


STANDARD PIPE

1/8

1/4

3/8

1/2

3/4

1

1 1/4

1 1/2

2

2 1/2

3

3 1/2

4

4 1/2

5

6

7

8

.035.1383

.049.2570

.049.3276

.065.5358

.065.6838

.065.8678

.0651.107

.0651.274

.0651.604

.0832.475

.0833.029

.0833.472

.0833.915

.1096.349

.1097.585

.1099.914

.25022.36

.068.2447

.088.4248

.091.5656

.109.8510

.1131.131

.1331.679

.1402.273

.1452.718

.1543.653

.2035.793

.2167.576

.2269.109

.23710.79

.24712.53

.25814.62

.28018.97

.30123.57

.32228.55

.405

.540

.675

.840

1.050

1.315

1.660

1.900

2.375

2.875

3.500

4.000

4.500

5.000

5.563

6.625

7.625

8.625

.049.1863

.065.3297

.065.4235

.083.6710

.083.8572

.1091.404

.1091.806

.1092.085

.1092.638

.1203.531

.1204.332

.1204.973

.1205.631

.1347.770

.1349.289

.14813.40

.068.2447

.088.4248

.091.5656

.109.8510

.1131.131

.1331.679

.1402.273

.1452.718

.1543.653

.2035.793

.2167.576

.2269.109

.237

10.79

.25814.62

.28018.97

.32228.55

.27724.70

.28112.22

.40635.64

PipeSize

5 20 STDO.D.(inches)

10 4030 60

Black = Wall ThicknessOrange = Lbs per lineal ft.

LEGEND


STANDARD PIPE

9

10

11

12

14

16

18

20

22

24

26

28

30

32

34

36

42

48

.13415.19

.16522.18

.25028.04

.25033.38

.31245.68

.31252.36

.31259.03

.37578.60

.37586.61

.37594.62

.500136.20

.500146.80

.500157.50

.500168.2

.500178.90

.500189.60

.34233.90

.36540.48

.37545.55

.37549.56

.37554.57

.37562.58

.37570.59

.37578.60

.37586.61

.37594.62

.375102.60

.375110.60

.375118.60

.375126.70

.375137.70

.375142.70

.375166.70

.375190.70

9.625

10.75

11.75

12.750

14

16

18

20

22

24

26

28

30

32

34

36

42

48

.16518.70

.18024.20

.25036.71

.25042.05

.25047.39

.250

52.73

.25058.07

.25063.41

.31285.60

.31292.26

.312

98.93

.312105.60

.344123.70

.312118.90

.36540.48

.40653.53

.437

63.37

.50082.77

.562

104.80

.593122.90

.687171.20

.688230.10

.688244.80

.750282.30

.30734.24

.33043.77

.37554.57

.37562.58

.43782.06

.500104.10

.500114.80

.562140.80

.625182.70

.625196.10

.625209.40

.625222.80

.625236.10

.50054.74

.56273.16

.59384.91

.656107.50

.750138.20

.812166.40

.875197.40

.968238.10

PipeSize

5 20 STDO.D.(inches)

10 4030 60

Black = Wall Thickness Orange = Lbs per lineal ft.

LEGEND


EXTRA HEAVY PIPE

1/8

1/4

3/8

1/2

3/4

1

1 1/4

1 1/2

2

2 1/2

3

3 1/2

4

4 1/2

5

6

7

8

.095.3145

.119.5351

.126.7388

.1471.088

.1541.474

.1792.172

.1912.997

.2003.631

.2185.022

.2767.662

.30010.25

.31812.51

.33714.98

.37520.78

.43228.57

.50043.39

.59350.87

.1871.034

.2181.937

.2502.844

.2503.765

.2814.859

.3437.444

.37510.01

.43714.32

.53122.51

.62532.96

.71845.30

.90674.69

.405

.540

.675

.840

1.050

1.315

1.660

1.900

2.375

2.875

3.500

4.000

4.500

5.000

5.563

6.625

7.625

8.625

.095.3145

.119.5351

.126.7388

.1471.088

.1541.474

.1792.172

.1912.997

.2003.631

.2185.022

.2767.662

.30010.25

.31812.51

.33714.98

.35517.61

.37520.78

.432

28.57

.50038.05

.50043.39

.81267.76

.43719.01

.50027.04

.56239.39

.71860.63

.2941.714

.3082.441

.3583.659

.3825.214

.4006.408

.4369.029

.55213.70

.60018.58

.63622.85

.67427.54

.71032.53

.75038.55

.86453.16

.87563.08

.87572.42

PipeSize

80 100 160O.D.(inches)

XH 140120 XXH


LEGEND


EXTRA HEAVY PIPE

9

10

11

12

14

16

18

20

22

24

26

28

30

32

34

36

42

48

.59364.33

.68788.51

.750106.10

.843136.50

.937170.80

1.031208.90

1.125250.80

1.218296.40

.71876.93

.843107.20

.937130.70

1.031164.80

1.156208.00

1.280256.10

1.375302.90

1.531367.40

1.125115.70

1.312160.30

1.406189.10

1.593245.10

1.781308.50

1.968379.00

2.125451.10

2.343541.90

9.625

10.75

11.75

12.750

14

16

18

20

22

24

26

28

30

32

34

36

42

48

.50048.72

.50054.74

.50060.07

.50065.42

.50072.09

.50082.77

.50093.45

.500104.10

.500114.80

.500125.50

.500136.20

.500146.80

.500157.50

.500168.20

.500178.90

.500189.60

.500221.60

.500253.50

1.000104.10

1.125139.70

1.250170.20

1.437223.50

1.562274.20

1.750341.10

1.875403.0

2.062483.10

.84389.20

1.000125.50

1.093150.70

1.218192.30

1.375244.10

1.500296.40

1.625353.60

1.812429.40

PipeSize

80 100 160O.D.(inches)

XH 140120 XXH


LEGEND


1/4

3/16

7 ga.

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

10.210

7.657

7.500

6.875

6.250

5.625

5.000

4.375

3.750

3.125

2.812

2.500

2.250

2.000

1.750

1.500

1.375

1.250

1.125

1.000

.875

.750

.688

.625

.562

.500

-

-

-

-

-

.006

.006

.006

.005

.005

.005

.005

.004

.004

.004

.003

.003

.003

.003

.003

.003

.002

.002

.002

.002

.001

.250

.188

.179

.164

.149

.134

.119

.104

.089

.074

.067

.059

.053

.048

.041

.036

.033

.030

.027

.024

.021

.018

.016

.015

.014

.012

.012

.009

.008

.008

.008

.008

.008

.008

.007

.007

.006

.006

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HOT AND COLD ROLLED SHEET

Ga. No. Lbs per Sq. Ft.Dec. Equiv.

A.I.S.I. Tol.

H.R. & H.R. P&O

(plus or minus)

C.R.


STEEL PLATE WEIGHT CHART

3/167/321/49/325/1611/323/813/327/1615/321/29/165/811/163/413/167/815/16

11 1/161 1/81 3/161 1/41 5/161 3/81 7/161 1/21 5/81 3/41 7/8

22 1/82 1/42 3/82 1/22 5/82 3/42 7/8

33 1/83 1/43 3/83 1/2

7.668.9310.2111.4912.7614.0415.3116.5917.8719.1420.4222.9725.5228.0830.6333.1835.7338.29

40.8443.3945.9448.5051.0553.6056.1558.7161.2666.3671.4776.57

81.6886.7891.8996.99102.10107.20112.31117.41

122.52127.62132.72137.83142.93

3.6253.753.875

4.4.1254.254.3754.54.6254.754.875

5.5.1255.255.3755.55.6255.755.875

6.6.1256.256.3756.56.6256.756.875

7.7.1257.257.3757.57.6257.757.875

8.8.5

9.

10.

148.04153.14158.25

163.35168.46173.56178.67183.77188.88193.98199.09

204.19209.30214.40219.51224.61229.72234.82239.93

245.03250.14255.24260.34265.45270.55275.66280.76

285.87290.97296.08301.18306.29311.39316.50321.60

326.71347.13

367.55

408.38

.1875

.21875

.25

.28125

.3125

.34375

.375

.40625

.4375

.46875

.5

.5625

.625

.6875

.75

.8125

.875

.9375

1.1.06251.1251.18751.251.31251.3751.43751.51.6251.751.875

2.2.1252.252.3752.52.6252.752.875

3.3.1253.253.3753.5

3 5/83 3/43 7/8

44 1/84 1/44 3/84 1/24 5/84 3/44 7/8

55 1/85 1/45 3/85 1/25 5/85 3/45 7/8

66 1/86 1/46 3/86 1/26 5/86 3/46 7/8

77 1/87 1/47 3/87 1/27 5/87 3/47 7/8

88 1/2

9

10

Thickness

(fractions)

TheoreticalWeight

(lbs per sq. ft.)

(inches)

(decimal)

Thickness

(fractions)

(inches)

(decimal)

TheoreticalWeight

(lbs per sq. ft.)


CHECKER PLATE

This tough, rolled steel floor plate with raised lug pattern provides plenty of traction for feet and wheels. The attractive design permits free drainage and easy maintenance since there are no pockets to collect dirt and grease and no pores to absorb liquids. Easy to fabricate and install.

16Ga x

14Ga x

12Ga x

1/8 x

3/16 x

1/4 x

5/16 x

3/8 x

1/2 x

5/8 x

3/4 x

1 x

3.00

3.75

5.25

6.16

8.71

11.26

13.81

16.37

21.47

26.58

31.68

41.89

Normal Gauge or Size

(inches)1

Normal Gauge or Size

(inches)1

Weight

(lbs per sq. ft.)

Weight

(lbs per sq. ft.)

1 Thickness exclusive of projecting lugs.


GALVANIZED SHEET

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

7.031

6.406

5.781

5.156

4.531

3.906

3.281

2.969

2.656

2.406

2.156

1.906

1.656

1.531

1.406

1.281

1.156

1.031

.906

.844

.781

.719

.656

.168

.153

.138

.123

.108

.093

.078

.071

.063

.057

.051

.045

.039

.036

.033

.030

.027

.024

.021

.020

.018

.017

.015

.009

.009

.009

.009

.009

.008

.008

.006

.006

.005

.005

.005

.004

.004

.004

.004

.004

.004

.003

.003

.003

.003

.003

Ga. No. Dec. Equiv. Lbs (per sq. ft.)

A.I.S.I. Tol.(plus or minus)


Gauge Range(franctions of an inch)

Thickness(decimals of an inch)

Theo. Weight(lbs per sq. ft.)Chroe Nichel Allowsy

262524232221201918171615141312111098

7

.0178 to .0198

.0199 to .023

.024 to .026

.027 to .029

.030 to .032

.033 to .035

.036 to .040

.041 to .046

.047 to .052

.053 to .058

.059 to .065

.066 to .072

.073 to .083

.084 to .098

.099 to .114

.115 to .130

.131 to .145

.146 to .160

.161 to .176

3/161/45/1611/323/813/327/1615/321/29/165/811/163/413/167/815/1611 1/81 1/41 3/81 1/23 3/422 1/23

.01875

.021875

.025

.028125

.03125

.034375

.0375

.04375

.050

.05625

.0625

.0703125

.078125

.09375

.109375

.125

.140625

.1562

.171875

.1875

.2500

.3125

.34375

.3750

.40625

.4375

.46875

.5000

.5625

.6250

.6875

.7500

.8125

.8750

.93751.0001.1251.2501.3751.5001.7502.0002.5003.000

.7632

.91871.0201.18131.271.44371.531.83752.042.36252.552.95313.183.93754.465.25005.90626.56257.2187

8.57911.16213.74615.62116.49618.28820.07920.87121.66324.24726.83129.47732.12334.70737.29140.97842.66547.90353.22658.54963.87174.51685.161106.452127.742

STAINLESS STEEL SHEET AND PLATE


Thickness(inches)

Thickness(inches)

Weight(lbs per sq. ft.)

Weight(lbs per sq. ft.)

.016

.020

.025

.032

.040

.051

.064

.081

.091

.125

.18751/45/163/81/25/83/41

1/16

1/8

3/16

1/4

3/8

1/2

0.2240.2820.3520.4540.5630.7180.9011.1411.2821.7622.6413.5214.4095.2917.0488.82010.58013.824

1.20

1.90

2.80

3.70

5.50

7.30

ALUMINUM SHEET AND PLATE

ALUMINUM TREAD PLATE

Raised four-way Diamond Pattern - has an approximate 1” centre - opposite side is smooth.

Thickness is measured exclusive of projections.


Pitc

h C

. to

C. o

f B

on

d

LWO

LWDPitch C. to C. of Bond

SWD SWO

STRAND WIDTH

STRAND THICKNESS

LWDPitch C. to C. of Bond

Pitc

h C

. to

C. o

f B

on

d

SWD SWO

METAL THICKNESS

EXPANDED METAL

STANDARD RAISED EXPANDED METAL is a finished steel product as it comes from the press after having been die cut and expanded. The illusration shows that the strands and bonds form a sharp angle to the original plane of the solid sheet.

FLATTENED EXPANDED METAL is a raised expanded metal which has been cold rolled, leaving a flat, smooth surface. The length of the sheet is elongated usuallly by 5% while the width stays the same.


STANDARD RAISED EXPANDED METAL

3/16-223/16-201/4-201/4-18

5/16-181/2-201/2-181/2-161/2-13

1/2-13(188)3/4-163/4-13

3/4-10 (13 Ga.)3/4-9 (10 Ga.)

1-161-141-121-10

1-10H1-7

11/2-1811/2-1611/2-1411/2-1311/2-12

11/2-10L (13 Ga.)11/2-10

11/2-10H11/2-9 (10 Ga.)

11/2-62-102-9

Style No.

(use this numberfor ordering)

627586

114104437086

1472825480

1201804476

101170200412204044607279

1702001202506890

Weight

(per 100 sq. ft.)

.200

.200

.255

.255

.333

.500

.500

.500

.500

.500

.923

.923

.923

.9231.0901.0901.0901.0901.0901.0901.3301.3301.3301.3301.3301.3301.3301.3301.3301.3301.8501.850

Centre to CenA

SWD

.166

.166

.172

.172

.188

.438

.438

.375

.313

.250

.813

.750

.750

.6881.000.875.907.750.725.576

1.3131.2501.1881.1881.1121.1881.000.8301.1251.0001.6251.563

Size of O

CSWD

.030

.036

.036

.048

.048

.036

.048

.060

.092

.092

.060

.092

.092

.134

.060

.075

.105

.135

.135

.183

.048

.060

.075

.092

.105

.092

.135

.135

.135

.198

.092

.134

Str

EThick.

.050

.050

.073

.073

.094

.072

.088

.086

.096

.188

.099

.096

.144

.148

.096

.122

.109

.155

.180

.275

.067

.107

.097

.104

.109

.137

.200

.240

.142

.201

.164

.149

and

FWidth

.500

.5001.0001.0001.0001.2001.2001.2001.2001.2002.0002.0002.0002.0002.4002.4002.4002.4002.4002.4003.0003.0003.0003.0003.0003.0003.0003.0003.0003.0004.0004.000

ter of BridgesB

LWD

.437

.437

.719

.719

.688

.938

.938

.938

.938

.8001.7501.6881.6251.5632.0631.5631.5631.5631.5631.5632.6252.6252.6252.5002.3752.5002.3752.3752.3752.3133.4383.375

penings

DLWD

ALL WEIGHTS AND DIMENSIONS SHOWN ABOVE ARE APPROXIMATESpecial size sheets can be produced to order.


FLATTENED EXPANDED METAL

3/16-22F3/16-20F1/4-20F1/4-18F

5/16-18F1/2-20F1/2-18F1/2-16F1/2-13F3/4-16F3/4-14F3/4-13F

3/4-10F (13 Ga.)3/4-9F (10 Ga.)

1-16F1-14F1-12F1-10F

11/2-16F11/2-14F11/2-13F11/2-12F11/2-10F

11/2-9F (10 Ga.)

Style No.

(use this numberfor ordering)

607283

11195406682

140516375

114171417396

16538465766

165111

Weight

(per 100 sq. ft.)

.200

.200

.255

.255

.333

.500

.500

.500

.500

.923

.923

.923

.923

.9231.0901.0901.0901.0901.3301.3301.3301.3301.3301.330

Centre to CenA

SWD

.085

.085

.094

.094

.172

.375

.281

.250

.250

.750

.688

.688

.637

.563

.875

.790

.785

.7501.0631.0631.0631.2960.9001.000

Size of O

CSWD

.024

.029

.030

.040

.040

.029

.039

.050

.070

.048

.061

.070

.070

.120

.048

.070

.085

.110

.048

.060

.070

.085

.110

.110

Str

EThick.

.057

.057

.086

.086

.099

.070

.109

.103

.122

.115

.119

.119

.160

.164

.115

.125

.156

.160

.123

.138

.138

.116

.188

.175

and

FWidth

.520

.5201.0301.0301.0301.2601.2601.2601.2602.1002.1002.1002.1002.1002.5602.5602.5602.5603.2003.2003.2003.2003.2003.200

ter of BridgesB

LWD

.459

.459

.688

.688

.8131.0001.0001.0001.0001.7501.8131.7821.7551.6882.2502.0002.0001.9002.7502.7502.7502.6252.5602.563

penings

DLWD

ALL WEIGHTS AND DIMENSIONS SHOWN ABOVE ARE APPROXIMATESpecial size sheets can be produced to order.


EXPANDED METAL GRATING

3

4

5

6.25

.540

.618

.655

.715

Style Overall Thickness

(inches)

3 lbs

4 lbs

5 lbs

6.25 lbs

Weight

(per sq. ft.)

8

8

8

8

StanShee

(feSWD

1.33

1.33

1.33

1.41

DiamoCentre t

(incSWD

.940

.940

.813

.813

.264

.300

.331

.350

Actuao

OpeSWD

Stran

(incWidth

3.44

3.44

3.38

3.38

.183

.215

.250

.312

l Sizefning

LWD

d Size

hes)Thick.

4

4

4

4

dardt sizeet)

LWD

5.33

5.33

5.33

5.33

nd Sizeo Centrehes)

LWD


WELDED STEEL BAR GRATING is the most popular of all grating types due to its strength, cost-efficient production and ease of installation. Universally used in most general industrial plants as well as commercial buildings, it has wide applications as walkways, platforms, safety barriers, drainage covers and ventilation grates.

WELDED1-3/16” Center to Center of Bearing Bars

WELDED

PLAIN19-W-4

Cross Rods 4” C/C

SERRATED19-W-4

Cross Rods 4” C/C

U = safe uniform load, psfC = safe concentrated load, pfwD = deflection, inchesE = modulus of elasticity, 29,000,000 psiF = fiber stress, 18,000 psi

Material: ASTM A-1011 standard

Deflection: Spans and loads to the right of the bold line exceed 1/4” deflection for the uniform load of 100 psf which provides safe pedestrian comfort. These can be exceeded for other types of loads with engineer’s approval.

Serrated Bars: For serrated grating, the depth of grat-ing required for a specified load is 1/4” deeper than that shown in the table.

General: Loads and deflections are theoretical and based on static loading.

BAR GRATING


STEEL BAR GRATING - LOAD & DEFLECTION TABLE (24” - 54”)

3/4” x 1/8”

3/4” x 3/16”

1” x 1/8”

1” x 3/16”

1-1/4” x 1/8”

1-1/4” x 3/16”

1-1/2” x 1/8”

1-1/2” x 3/16”

1-3/4” x 3/16”

2” x 3/16”

2-1/4” x 3/16”

2-1/2” x 3/16”

W 3.9P 4.3

W 5.6P 6.4

W 5.0P 5.4

W 7.2P 8.1

W 6.1P 6.8

W 8.9P 10.2

W 7.2P 7.9

W 10.5P 11.8

W 12.2P 13.5

W 13.9P 15.2

W 15.5P 16.8

W 17.2P 18.5

19-4-32

19-4-33

19-4-42

19-4-43

19-4-52

19-4-53

19-4-62

19-4-63

19-4-73

19-4-83

19-4-93

19-4-103

0.118

0.178

0.211

0.316

0.329

0.493

0.474

0.711

0.967

1.263

1.599

1.974

3550.099355

5330.099533

6320.074632

9470.074947

9870.060987

14800.0601480

14210.0501421

21320.0502132

29010.0432901

37890.0373789

47960.0334796

59210.0305921

1580.223237

2370.223355

2810.168421

4210.168632

4390.134658

6580.134987

6320.112947

9470.1121421

12890.0961934

16840.0842526

21320.0743197

26320.0673947

890.397178

1330.397266

1580.298316

2370.298474

2470.238493

3700.238740

3550.199711

5330.1991066

7250.1701451

9470.1491895

11990.1322398

14800.1192961

2270.155284

3410.155426

4040.116505

6060.116758

6320.093789

9470.0931184

9090.0781137

13640.0781705

18570.0672321

24250.0583032

30690.0523837

37890.0474737

1160.304203

1740.304305

2060.228361

3090.228541

3220.182564

4830.182846

4640.152812

6960.1521218

9470.1301658

12370.1142165

15660.1012741

19330.0913383

700.503158

1050.503237

1250.377281

1870.377421

1950.302439

2920.302658

2810.251632

4210.251947

5730.2151289

7490.1891684

9470.1682132

11700.1512632

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

Bar Size ApproximateWeight

(per sq. ft.)

Symbol Sec. Mod

(per ft.of width) 24”

SPlength of

36”

ar )

48”

(

30”

AN bearing B

42” 54”


STEEL BAR GRATING - LOAD & DEFLECTION TABLE (60” - 108”)

1” x 1/8”

1” x 3/16”

1-1/4” x 1/8”

1-1/4” x 3/16”

1-1/2” x 1/8”

1-1/2” x 3/16”

1-3/4” x 3/16”

2” x 3/16”

2-1/4” x 3/16”

2-1/2” x 3/16”

W 5.0P 5.4

W 7.2P 8.1

W 6.1P 6.8

W 8.9P 10.2

W 7.2P 7.9

W 10.5P 11.8

W 12.2P 13.5

W 13.9P 15.2

W 15.5P 16.8

W 17.2P 18.5

19-4-42

19-4-43

19-4-52

19-4-53

19-4-62

19-4-63

19-4-73

19-4-83

19-4-93

19-4-103

0.211

0.316

0.329

0.493

0.474

0.711

0.967

1.263

1.599

1.974

1010.466253

1520.466379

1580.372395

2370.372592

2270.310568

3410.310853

4640.2661161

6060.2331516

7670.2071918

9470.1862368

1100.536329

1640.536493

1580.447474

2370.447711

3220.383967

4210.3351263

5330.2981599

6580.2681974

810.730282

1210.730423

1160.608406

1740.608609

2370.521829

3090.4561083

3920.4061370

4830.3651692

840.563230

1250.563344

1300.451359

1960.451538

1880.376517

2820.376775

3840.3221055

5010.2821378

6340.2501744

7830.2252153

930.629304

1400.629455

1350.524437

2020.524656

2750.450893

3590.3931166

4540.3501476

5610.3151822

890.794355

1330.794533

1810.681725

2370.596947

3000.5301199

3700.4771480

701.006316

1051.006474

1430.862645

1870.754842

2370.6701066

2920.6031316

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

UDC

Bar Size ApproximateWeight

(per sq. ft.)

Symbol Sec. Mod

(per ft.of Width) 60”

(length

72”

ing bar)

84”66”

SPAN of bear

78” 96” 108”


STAFETY GRATING - DIAMOND GRIP®

PRODUCT DESCRIPTIONDIAMOND-GRIP® is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has rough serrated edges around diamond shaped openings. Diamond openings are complete with radiused corners at the saddle and side channel locations.

MATERIAL SPECIFICATIONSGrating shall be “DIAMOND GRIP® channel,” manufactured from Pre-Galvanized Steel and complete with a (1-1/2”, 2”, 2-1/2”, 3”) side channel.

4 3/4”

7”

9 1/2”

11 3/4”

18 3/4”

24”

5/16”

1/4”

1/4”

3/16”

3/16”

7/16”

14 ga.

12 ga.

12 ga.

12 ga.

12 ga.

12 ga.

2.4

4.2

5.1

6

8.5

10.4

7/8”

1”

7/8”

1”

1”

1 1/8”

1 1/2”

1 1/2”

1 1/2”

1 1/2”

1 1/2”

2”

Channel Width

“A”

Diamond to Outside“C”

Return Flange

“B”

Height (Varies)

“D”

Gauge (Varies)

“E”

Weight(per Linear Ft.)

* Most common shown, inquire for different sizes.


STAFETY GRATING - SAFETY GRIP®

PRODUCT DESCRIPTIONSAFETY GRIP® is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and large debossed holes, surrounded by smaller embossed traction buttons.

MATERIAL SPECIFICATIONSGrating shall be “SAFETY GRIP® channel,” manufactured from Pre-Galvanized Steel and complete with a (1-1/2”, 2”, 2-1/2”, 3”) side channel depth.

ChannelWidth

“A”

L HoleChannel Edge

“C”

ReturnFlange

“B”

5”

7”

10”

12”

18”

24”

30”

1 21/32”

1 13/16”

1 5/8”

1 25/32”

1 13/32”

1 7/8”

2 11/36”

7/8”

1”

7/8”

1”

1”

1 1/ 18”

1 1/18”


Diameter Weight(lbs per sq. ft.)

1/45/163/81/25/83/47/81

.167

.261

.376

.6681.0431.5022.0452.670

ALL THREAD ROD - COARSE THREAD

REINFORCING BARS (Rebar)

CONCRETE REINFORCING BARS6 METRE ( 19’ 8” ) LENGTHS

ALL THREAD ROD - COARSE THREAD12 FOOT LENGTHS

Size Diameter

10M

15M

20M

25M

10mm (.394”)

15mm (.591”)

20mm (.797”)

25mm (.984”)

WeightLbs/Foot

WeightLbs/Foot

.528

1.055

1.583

2.638

Diameter

1/4” .167

5/16” .261

3/8” .376

1/2” .668

5/8” 1.043

3/4” 1.502

7/8” 2.045

1” 2.670

- 43 -

3/167/321/49/325/1611/323/813/32

7.668.9310.2111.4912.7614.0415.3116.59

3.6253.753.875

4.4.1254.254.375

.1875

.21875

.25

.28125

.3125

.34375

.375

.40625

3 5/83 3/43 7/8

44 1/84 1/44 3/8

Metric BarDesignation

Kilograms(per lineal meter)

Pounds(per lineal ft.)

Nomi

in2

nal Area

mm2


DATA

1/641/323/641/16

5/643/327/641/8

9/645/32

11/643/16

13/647/32

15/641/4

17/649/32

19/645/16

21/6411/3223/64

3/8

25/6413/3227/647/16

29/6415/3231/64

1/2

.3962

.79251.19131.5875

1.98442.37992.77623.1750

3.57123.96754.36634.7625

5.15875.55495.59386.3500

6.74627.14257.54127.9375

8.33378.75999.12879.5250

9.921210.317410.716711.1125

11.508711.904912.303712.7000

.5156

.5312

.5469

.5625

.5781

.5937

.6094

.6250

.6406

.6562

.6719

.6875

.7031

.7187

.7344

.7500

.7656

.7812

.7969

.8125

.8281

.8437

.8594

.8750

.8906

.9062

.9219

.9375

.9531

.9687

.98441.000

.0156

.0312

.0469

.0625

.0781

.0937

.1093

.1250

.1406

.1562

.1719

.1875

.2031

.2187

.2344

.2500

.2656

.2812

.2969

.3125

.3281

.3437

.3594

.3750

.3906

.4062

.4219

.4375

.4531

.4687

.4844

.5000

33/6417/3235/649/16

37/6419/3239/64

5/8

41/6421/3243/6411/16

45/6423/3247/64

3/4

49/6425/3251/6413/16

53/6427/3255/64

7/8

57/6429/3259/6415/16

61/6431/3263/64

1

13.096213.492513.891214.2875

14.683715.079915.478715.8750

16.271216.667517.066217.4625

17.858718.254918.653819.0500

19.446219.842520.241320.6375

21.033721.429921.828722.2250

22.621223.017523.416223.8125

24.208724.604925.003725.4000

Inch Fractions mm

InchDecimals

InchDecimals

Inch Fractions mm

IMPERIAL / METRIC CONVERSION CHART(Numerical Equivalents of Fractions, Decimals & Millimeters)


DATA

6867666564

6362616059

5857565554

5352515049

4847464544

4240383634

32302826242220

inexactand only for steel

351

338325313301292

283273264255246

238229221215208

194182171161152

146138131125119115110

-----

-----

615595577560543

525512496481469

451442432421409

390371353336319

301286271258247237226

C150 kg BraieRockwell

Approx. TensileStrengthksi

BRINELL3000 kg/10mm BallBrinell** (Standard Ball)

HARDNESS CONVERSIONSApproximate relations betwen Brinell, Rockwell and the tensile strengths of S.A.E. carbon and alloy construction steels.


DATA

USEFUL INFORMATION

To find circumference of a circle multiply diameter by 3.1416.

To find diameter of a circle multiply circumference by .31831.

To find area of a circle multiply square of diameter by .7854.

Radius of circle equals half of diameter.

Area of rectangle. Length multiplied by width. Doubling the diameter of a circle increases its area four times.

To find area of a triangle multiply base by 1/2 perpendicular height.

Area of ellipse = product of both diameters x .7854.

Area of parellelogram = base x altitude.

To find side of an inscribed square multiply diameter by 0.7071 or multiply circumference by 0.2251 or divide circumference by 4.4428.

Side of inscribed cube = radius of sphere x 1.1547.

To find side of an equal square multiply diameter by .8862.

Square. A side multiplied by 1.4142 equals diameter of its circumscribing circle.

A side mulitplied by 4.443 equals circumference of its circumscribing circle.

A side multiplied by 1.128 equals diameter of an equal circle.


A side multiplied by 3.547 equals circumference of an equal circle.

To find cubic inches in a ball multiply cube of diameter by .5236.

To find cubic contents of a cone, multiply area of base by 2/3 the altitude.

Surface of frustum of cone or pyramid = sum of circumference of both ends x 1/2 slant height plus area of both ends.

Contents of frustum of cone or pyramid = multiply area of two ends and get square root. Add the 2 areas and x 1/3 altitude.

Doubling the diameter of a pipe increases its capacity four times.

A cubic foot of water contains 7.4805 U.S. (6.2278 Imp.) gallons, 1728 cubic inches, and weighs 62 1/2 lbs

To find the pressure in pounds per square inch of a column of water multiply the height of the column in feet by .434.

Steam rising from water at its boiling point (212o) has a pressure equal to the atmosphere (14.7 lbs to the square inch).

A standard horse power: The evaporation of 30 lbs of water per hour from a fee water temperature of 100o F. into steam at 70 lbs gauge pressure.

To ascertain heating surface in tubular boilers multiply 2/3 the circumference of boiler by length of boiler in inches and add to it the area of all the tubes.

One metre equals 39.37 inches.

To find millimetre equivalent of inch decimals, multiply by 25.4.

DATA

204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA [email protected]

MAKE IT. WORK.

reference catalogue - brunswick...

Documents