Tribology Research References Quarterly Update- Vol.1, 2009

S.No. Journal 1 Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

a) Volume 223, Number 1 / 2009b) Volume 223, Number 2/ 2009c) Volume 223, Number 3 / 2009

2. Tribology Internationala) Volume 42, Issue 1 (January 2009)b) Volume 42, Issue 2 (Feburary 2009)c) Volume 42, Issue 3 (March 2009)d) Volume 42, Issue 4 (April 2009)e) Volume 42, Issue 5 (May 2009)f) Volume 42, Issue 6 (June 2009)

3. Tribology Lettersa) Volume 33, Number 1(January, 2009)b) Volume 33, Number 2 (February, 2009)c) Volume 33, Number 3 (March, 2009)d) Volume 34, Number 1 (April, 2009)e) Volume 34, Number 2 (May, 2009)f) Volume 34, Number 3 (June, 2009)

4. Tribology Transactionsa) Volume 52 Issue 1 2009b) Volume 52 Issue 2 2009c) Volume 52 Issue 3 2009d) Volume 52 Issue 4 2009

(c) Tribology Society of India 2009

5. Weara) Volume 266, Issues 1-2 (5 January 2009)b) Volume 266, Issues 3-4 (5 February 2009)c) Volume 266, Issues 5-6 (15 March 2009)d) Volume 266, Issues 7-8 (25 March 2009) e) Volume 266, Issues 9-10 (24 April 2009)f) Volume 266, Issues 11-12 (30 May 2009)

S.No. Journal 6. Indian Journal of Tribology

a) Volume 4, No. 1, January-June-20097. Journal “ Lubrication Science”(From 2009 Journal of Synthetic Lubrication and Tribotest will be also

incorporated in this Journal)a) Volume 21 Issue 1 , January 2009b) Volume 21 Issue 2 , February 2009c) Volume 21 Issue 3 , March 2009d) Volume 21 Issue 4 , April 2009

8. Journal of Tribologya) Volume 131, Number 1, January 2009b) Volume 131, Number 2, April 2009

(c) Tribology Society of India 2009

1. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

S.No. IndexVolume 223, Number 1 / 2009

1 Tribology research in China: a personal view. 2 Sound of a ball spline operated at a certain linear velocity3 Characterization of thermally sprayed micro- and nanocrystalline cylinder wall coatings by means of a cavitation test 4 The effect of niobium on the adhesive wear resistance of ferritic stainless steel 5 Frictional and wear performance of polyester composites based on coir fibres6 Interaction research of thiadiazole derivate and molybdenum naphthenate using X-ray absorption near edge

structure spectroscopy 7 About the validity of Reynolds equation and inertia effects in textured sliders of infinite width 8 Transient modal analysis of the non-linear dynamics of a turbocharger on floating ring bearings9 Instantaneous angular speed and power for the diagnosis of single-stage, double-acting reciprocating compressor10 Predicting the thermal behaviour of engine oils using artificial neural networks

Volume 223, Number 2/ 2009

1 Non-linearity in experimental journal bearing dynamics – a new approach2 A method for determining the periodic solution and its stability of non-linear bearing–rotor system based on

observed states of the system3 Analytical investigation of a partially textured parallel slider4 Surface coatings and finite-element analysis of layered fretting contacts5 Wear and frictional performance of betelnut fibre-reinforced polyester composite6 Experimental investigations on the influence of emulsifier content in cutting fluids on machined surface7 Influence of emulsifier content in cutting fluids on cutting forces, cutting temperatures, tool wear, and surface

roughness8 Dynamic stiffness and damping characteristics of one-dimensional magneto-hydrodynamic inclined-plane slider

bearings9 Applicability of cutting fluids with nanoparticle inclusion as coolants in machining10 Influence of counterbody material on fretting wear behaviour of uncoated and diamond-like carbon-coated Ti-6Al-4V

Back

(c) Tribology Society of India 2009

S.No. Index 11 Book Review : Tribology on the Small Scale, C. M.Mate, 2008, Oxford University Press, Oxford, UK, 33 pp.

(hardback) (ISBN 978-0-19-852678-0)Volume 223, Number 3 / 2009

1 Component mal-position: the ‘Achilles’ heel' of bearing surfaces in hip replacement2 Roles of adsorbed film and gel layer in hydration lubrication for articular cartilage3 Wear tests of orthopaedic biopolymers with the biolubricant augmented by a visco-supplement4 The influence of swing phase load on the electrochemical response, friction, and ion release of metal-on-metal hip

prostheses in a friction simulator5 Effect of surface modification on surface properties and tribological behaviours of titanium alloys6 Tribological analysis of failed resurfacing hip prostheses and comparison with clinical data7 Friction and lubricant film thickness measurements on simulated synovial fluids8 Thin film flow over flexible membranes containing surface texturing: bio-inspired solutions9 Review of the lubrication, sealing, and pumping mechanisms in oil- and grease-lubricated radial lip seals10 Dynamics of offset journal bearings – revisited11 Impact of the cavitation model on the theoretical performance of heterogeneous slip/no-slip engineered contacts in

hydrodynamic conditions12 The effect of load and viscosity on the minimum operating oil film thickness of piston-rings in internal combustion

engines13 Effects of friction modifiers on Pb-free plain bearing lubrication14 Tribological properties of diamond-like carbon coatings in lubricated automotive applications15 Friction modelling in an engine valve train considering the sensitivity to lubricant formulation16 Young's moduli and wear of cermet coatings17 Effects of area ratio and nature of surfaces on scuffing in lubricated contacts18 The influence of sea water in oil emulsion on bearing performance19 Investigations on the power losses and thermal effects in gear transmissions20 Micropitting of carburized gears lubricated with biodegradable low-toxicity oils21 High-speed wear lifetime analysis of instrument ball bearings22 Film thickness calculation in elasto-hydrodynamic lubricated line and elliptical contacts: the Dowson, Higginson,

Hamrock contribution23 Engineering analysis of rough elastohydrodynamically lubricated contacts24 An exploration of the elastohydrodynamic– hydrodynamic transition through film thickness measurements in rolling

point contactsBack

(c) Tribology Society of India 2009

S.No. Index 25 Prediction of film thickness decay in starved elasto-hydrodynamically lubricated contacts using a thin layer flow

model26 Lubrication of an electroplated nickel matrix silicon carbide coated eutectic aluminium–silicon alloy automotive

cylinder bore with an ionic liquid as a lubricant additive27 Effects of various base oils and additives on the tribological behaviour of lubricated aluminium- on-aluminium and

steel-on-aluminium contacts28 Physical properties of boundary layers in angular contact ball bearings lubricated with greases containing polymers29 Surface interactions and tribochemistry in boundary lubrication of hypereutectic aluminium–silicon alloys

2. Tribology International

Volume 42, Issue 1 (January 2009)

1 The influence of operating condition on acoustic emission (AE) generation during meshing of helical and spur gear2 Modelling of plowing and shear friction coefficients during high-temperature ball-on-disc tests3 Thermal modelling of the lemon-bore hydrodynamic bearing4 Tribological properties of molybdenum disulfide nanosheets by monolayer restacking process as additive in liquid

paraffin5 Scratch and indentation tests on seashells6 Response surface methodology for eicosanoic acid triboproperties in castor oil7 Effect of grain refinement and modification on the dry sliding wear behaviour of eutectic Al–Si alloys8 Effects of scratching directions on AFM-based abrasive abrasion process9 On the non-linear stability of self-acting gas journal bearings10 Micropitting performance of nitrided steel gears lubricated with mineral and ester oils11 Structural analysis of simple base oils under high pressure using synchrotron radiation X-ray diffraction: First trial12 Cavitation within the framework of reduced description of mixed lubrication13 Microabrasion–corrosion of cast CoCrMo alloy in simulated body fluids14 Analysis of gas foil bearings integrating FE top foil models15 Modification of fretting fatigue behavior of AL7075–T6 alloy by the application of titanium coating using IBED

technique and shot16 Characterizing cavitation erosion particles by analysis of SEM images17 Surface stresses in coated steel surfaces—influence of a bond layer on surface fracture

Back

(c) Tribology Society of India 2009

S.No. Index 18 Sliding friction at elastomer/glass contact: Influence of the wetting conditions and instability analysis19 Diamond particle shape: Its measurement and influence in abrasive wear20 Experimental and numerical evaluation of contact pressure in pneumatic seals21 Mechanical and tribological properties of Al–40Zn–Cu alloys22 Investigation of adhesive and frictional behavior of GeSbTe films with AFM/FFM23 Frictional testing of wood—Initial studies with a new device

Volume 42, Issue 2 (Feburary 2009)1. Impact dynamics of rough and surface protected MEMS gears2. Mathematical modeling of the thermal relaxation of nominally flat surfaces in contact using fractal geometry:

Maxwell type medium3. An advanced Park's vectors approach for bearing fault detection4. A DOE nano-tribological study of thin amorphous carbon-based films5. Tribological behavior of tungsten-doped DLC coating under oil lubrication6. The relationship between AE and dissipation energy for fretting wear7. Effect of plasma treatment of Kevlar fabric on the tribological behavior of Kevlar fabric/phenolic composites8. Real versus synthesized fractal surfaces: Contact mechanics and transport properties9. On elastic deformation, inter-asperity cavitation and lubricant thermal effects on flow factors10. On the analysis of steady-state sliding wear processes11. The effect of surface texturing in soft elasto-hydrodynamic lubrication12. Multi-scale enveloping spectrogram for vibration analysis in bearing defect diagnosis13. Externally pressurized gas bearings: A comparison between two supply holes configurations14. Effects of friction laws on metal forming processes15. On the surface and tribological characteristics of burnished cylindrical Al-606116. Effect of saliva viscosity on tribological behaviour of tooth enamel17. Magneto-elastohydrodynamic lubrication of circular contacts at impact loading18. Experimental studies on the effects of reduction in gear tooth stiffness and lubricant film thickness in a spur geared

system19. Friction and wear behavior of thioether hydroxy vegetable oil20. Impact dynamics of rough and surface protected MEMS gears21. Mathematical modeling of the thermal relaxation of nominally flat surfaces in contact using fractal geometry:

Maxwell type medium22. An advanced Park's vectors approach for bearing fault detection

Back

(c) Tribology Society of India 2009

S.No. Index 23. A DOE nano-tribological study of thin amorphous carbon-based films24. Influence of thermal conductivity on wear when machining titanium alloys25. A coupled finite element and meshfree analysis of erosive wear26. Tribological study of elastomeric bearings for marine propeller shaft system

Volume 42, Issue 3 (March 2009)1. EDM effects on the thermal properties of 36NiCrMo16 steel2. Tribological properties of fluorine-containing additives of silicone oil3. The mechanisms of pedestrian slip on flooring contaminated with solid particles4. Hydrostatic air foil bearings: Analytical and experimental investigation5. Chaos of rub–impact rotor supported by bearings with nonlinear suspension6. Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces7. Steadily loaded journal bearings: Quasi-3D mass–energy-conserving analysis8. Impact of contact size and complex gross–partial slip conditions on Ti–6Al–4V/Ti–6Al–4V fretting wear9. An investigation into the effect of train curving on wear and contact stresses of wheel and rail10. The effect of temperature on gross slip fretting wear of cold-sprayed nickel coatings on Ti6Al4V interfaces11. Performance improvement method for Nylon 6 spur gears

Volume 42, Issue 4 (April 2009)1. Tribology for engines and transmissions2. Modelling the effect of surface roughness on lubrication in all regimes3. Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous

film shapes4. The influence of the slide-to-roll ratio on the friction coefficient and film thickness of EHD point contacts under

steady state and transient conditions5. Behavior of thin viscous boundary films in lubricated contacts between micro-textured surfaces6. Improving fuel efficiency with laser surface textured piston rings7. Effect of base stocks on the automobile engine bearing8. The lubricant-coating interaction in rolling and sliding contacts9. Biolubricants and triboreactive materials for automotive applications10. Influence of grease composition on rolling contact wear: Experimental study11. Effect of electrode potential on the tribocorrosion of tungsten12. Application of diamond-like carbon coatings to elastomers frictional surfaces

Back

(c) Tribology Society of India 2009

S.No. Index 13. Corrosion-wear behaviour of PVD Cr/CrN multilayer coatings for gear applications14. Metal woven wire cloth feeding system for gas bearings15. Attenuation of lateral tape motion due to frictional interaction with a cylindrical guide

Volume 42, Issue 5 (May 2009)1. Attenuation of lateral tape motion due to frictional interaction with a cylindrical guide2. Effect of counterpart on the tribological behavior and tribo-induced phase transformation of Si3. Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel4. Prediction of wear behaviour of A356/SiCp MMCs using neural networks5. Analysis of flow field around a ribbed helix lip sea6. High temperature friction and wear performances of Ti/Cu-doped carbonaceous mesophases7. Dynamic stability experiments of compliant foil thrust bearing with viscoelastic support8. Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out

characteristics9. The influence of current load on fretting of electrical contacts10. Friction-induced structural modifications of Mg and Ti surfaces11. Increasing nanohardness and reducing friction of nitride steel by laser surface texturing12. Belt abrasion resistance and cutting tool studies on new ultra-hard boride materials13. Fe thermal analysis of a ceramic clutch14. In situ pressure measurements in dimpled elastohydrodynamic sliding contacts by Raman microspectroscopy15. Fluid leakage in seals: An approach based on percolation theory16. Identification of a friction model—Application to the context of dry cutting of an AISI 1045 annealed steel with a

TiN-coated carbide tool17. The effects of welding processes on abrasive wear resistance for hardfacing deposits18. Direct laser cladding of SiC dispersed AISI 316L stainless steel19. Steady state and dynamic characteristics of axial grooved journal bearings20. Analysis of conjugate heat transfer and turbulent flow in mechanical seals21. Heat transfer correlations for laminar flows within a mechanical seal chamber

Volume 42, Issue 6 (June 2009)1. Nanoindentation and nanowear study of Sn and Ni–Sn coatings2. Tribological properties of Mn–Zn–Fe magnetic fluids under magnetic field3. Structural, mechanical and tribological properties of nanostructured CNx/TiN multilayers

Back

(c) Tribology Society of India 2009

S.No. Index 4. Incipient damage detection and its propagation monitoring of rolling contact fatigue by acoustic emission5. Prevention of fluttering fatigue damage in a tilting pad journal bearing6. Mechanical and tribological properties of short-fiber-reinforced SiC composites7. Effect of cation on micro/nano-tribological properties of ultra-thin ionic liquid films8. Experimental diagnostics of ball bearings using statistical and spectral methods9. Analysis of the leakage path in an air-lubricated seal10. Isolation and identification of dry bearing faults in induction machine using wavelet transform11. EHL squeeze at pin–pulley interface in CVTs: Influence of lubricant rheology12. Effect of counterparts on the friction and wear behavior of polyelectrolyte multilayers13. Fretting on the cubic face of a single-crystal Ni-base superalloy at room temperature14. Corrosion and wear of 6082 aluminum alloy15. Physical and tribological properties of PTFE micropowder-filled EPDM rubber16. Determination of the real contact area for numerical simulation17. Effects of temperature dependent air properties on the performances of a thermal actuated slider18. Tribological properties of diamond and SiO2 nanoparticles added in paraffin19. Assessing the energy efficiency of gear oils via the FZG test machine20. Friction reducing effect of multiply adsorptive organic polymer21. Friction and wear behaviour of stainless steel rubbing against copper-impregnated metallized carbon22. XPS and XANES characteristics of tribofilms and thermal films generated by two P- and/or S-containing

additives in water-based lubricant23. The frictional behavior of mild steel under horizontal vibration24. Application of influence function method on the fretting wear of tube-to-plate contact25. Relationship between wear of friction materials and dissipated power density26. Thermal elastohydrodynamic lubrication of starved elliptical contacts27. The behavior of the liquid-like Langmuir's adsorbed film on air bearing surfaces28. Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis29. Evaluation of antioxidants in rapeseed oils for railway application30. Thermal wear and electrical sliding wear behaviors of the polyimide modified polymer-matrix pantograph

contact strip31. Tribological compatibility and improvement of machining productivity and surface integrity

Back

(c) Tribology Society of India 2009

3. Tribology Letters

S.No. Index 32. Surface topography and tribology of cast iron in boundary lubrication

Volume 33, Number 1(January, 2009)1. A Novel Method for Quantitative Determination of Ultra-low Wear Rates of Materials, Part II: Effects of

Surface Roughness and Roughness Orientation on Wear2. Anisotropic Wear Resistance of Human Mandible Cortical Bone3. Boundary Effect on Particle Motion in the Head Disk Interface 4. Deactivation Effect of Tricresyl Phosphate (TCP) on Tribochemical Decomposition of Hydrocarbon Oil on a

Nascent Steel Surface 5. Determination of the Friction Coefficient During Glass Polishing6. Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus

Ta2AlC/Ag or Cr2AlC/Ag Composites 7. Molecular Dynamics Simulation of Rolling Friction Using Nanosize Spheres 8. Relation Between Inter-Particle Distance (LIPD) and Abrasion in Multiphase Matrix–Carbide Materials 9. Wear Mechanisms in Galling: Cold Work Tool Materials Sliding Against High-strength Carbon Steel Sheets

Volume 33, Number 2 (February, 2009)1. A Novel Method for Quantitative Determination of Ultra-low Wear Rates of Materials, Part I: On Steels2. An Experimental Validation of the Recently Discovered Scale Effect in Generalized Newtonian EHL3. Correlation Between Tribological Parameters and Wear Mechanisms of Homogeneous and Heterogeneous

Material4. End-grafted Sugar Chains as Aqueous Lubricant Additives: Synthesis and Macrotribological Tests of Poly(l -

lysine)- graft -Dextran (PLL- g -dex) Copolymers5. Ionic Liquids as Lubricants of Titanium–Steel Contact6. Rolling–Sliding Laboratory Tests of Friction Modifiers in Leaf Contaminated Wheel–Rail Contacts7. The Role of Configuration Entropy in Boundary Lubricants Based on the n -Perfluoropropylene Oxide Main

Chain Structure Volume 33, Number 3 (March, 2009)

1. Air Bearing Simulation for Bit Patterned Media2. Effect of Contact Stiffness on Creep-Groan Occurrence on a Simple Caliper-Slider Experimental Model

Back

(c) Tribology Society of India 2009

S.No. Index 3. Inert Gas Filled Head–Disk Interface for Future Extremely High Density Magnetic Recording4. Interferometry Measurement of Spin Effect on Sliding EHL 5. Sliding Tribological Characteristics of a Zr-based Bulk Metallic Glass Near the Glass Transition Temperature6. Study on the Synthesis and Tribological Property of Fe3O4 Based Magnetic Fluids7. Tribocorrosion of Diamond-Like Carbon Deposited on Ti6Al4V8. Tribological Behaviour of Structural Si-Based Ceramics in Fretting Tests at Room Temperature

Volume 34, Number 1 (April, 2009)1. Anomalous Low Friction Under Boundary Lubrication of Steel Surfaces by Polyols2. Effects of Self-Assembled Monolayer and PFPE Lubricant on Wear Characteristics of Flat Silicon Tips 3. Effects of Tail Group and Chain Length on the Tribological Behaviors of Self-Assembled Dual-Layer Films in

Atmosphere and in Vacuum4. Embedding Wear Models into Friction Models 5. Nanofretting Behavior of Monocrystalline Silicon (100) Against SiO2 Microsphere in Vacuum6. Nanoscale Tribology, Energy Dissipation and Failure Mechanisms of Nano- and Micro-silica Particle-filled

Polymer Composites7. Speed and Atmosphere Influences on Nanotribological Properties of NbSe2 8. Tribological Properties of Fluorinated Carbon Nanofibres

Volume 34, Number 2 (May, 2009)1. Effect of Tribofilm Formation on the Dry Sliding Friction and Wear Properties of Magnetron Sputtered

TiAlCrYN Coatings 2. Fabrication, Characterisation and Tribological Investigation of Artificial Skin Surface Lipid Films3. Investigation of an Approach to Balance Wear Resistance and Mechanical Properties of Crosslinked

UHMWPE4. Molecular Orientation, Crystallinity, and Topographical Changes in Sliding and their Frictional Effects for

UHMWPE Film 5. Occurrence of Wall Slip in Elastohydrodynamic Lubrication Contacts 6. Synthesis of Fluorinated ZDDP Compounds

Tribological Characteristics of Alkylimidazolium Diethyl Phosphates Ionic Liquids as Lubricants for Steel–Steel Contact

Back

(c) Tribology Society of India 2009

S.No. Index Volume 34, Number 3 (June, 2009)

1. Aqueous Lubrication of SiC and Si3N4 Ceramics Aided by a Brush-like Copolymer Additive, Poly(l -lysine)- graft -poly(ethylene glycol

2. Dry-sliding Tribological Properties of Nano-Eutectic Fe83B17 Alloy 3. High Temperature Tribological Characteristics of Fe–Mo-based Self-Lubricating Composites4. Microstructure and Wear Properties of In Situ Synthesized VC Carbide Reinforced Fe-based Surface

Composite Coating Produced by Laser Cladding 5. Tribochemistry of a Ti Alloy Under Fretting in Air: Evidence of Titanium Nitride Formation6. Tribocorrosion of Diamond-Like Carbon Deposited on Ti6Al4V7. Tribological Performance of Alternating-Layered Si-DLC/DLC Films Under Humid Conditions8. Wear Mechanisms at High Temperatures. Part 1: Wear Mechanisms of Different Fe-Based Alloys at Elevated

Temperatures 9. Wear Mechanisms at High Temperatures: Part 2: Temperature Effect on Wear Mechanisms in the Erosion

Test

4. Tribology Transactions

Volume 52 Issue 1 20091. Self-Adapting Microscale Surface Grooves for Hydrodynamic Lubrication2. Influence of Critical Micelle Concentration (CMC) on Tribological Properties of Aqueous Solutions of Alkyl

Polyglucosides3. Effect of Surface Texturing on Very Thin Film EHD Lubricated Contacts4. Durable Anti-Smudge Materials for Display Terminals5. A Dynamic Model for Dissipative Structures used in Bump-Type Foil Bearings6. Design and Development of a Test Setup for Online Wear Monitoring of Mechanical Face Seals Using a

Torque Sensor7. Effect of Aramid Fiber and ZnO Nanoparticles on Friction and Wear of PTFE Composites in Dry and LN2

Conditions8. CFD Study on Oil-in-Water Emulsions9. Antiwear Properties of Blends Containing Mixtures of Zinc Dialkyl Dithiophosphate and Different Detergents10. Numerical Analysis on Lubricating Properties of Tripod Sliding Universal Joints

Back

(c) Tribology Society of India 2009

S.No. Index 11. Pretreatment of Steel Racetracks by using a Sand-Blasting Technique with a Special Emphasis on Si3N4

Powder—Part One12. Traction of Lubricated Rolling Contacts between Thin-Film Coatings and Steel13. Bearing Fatigue Life Tests in Advanced Base Oil and Grease for Space Applications 14. Influence of Material Nature and Surface Texturing on Wear of Heavy-Duty Diesel Engine Cylinder Liners 15. Frictional Torque of Needle Roller Thrust Bearings16. Frictional Performances of Activated Carbon and Carbon Blacks as Lubricant Additives

Volume 52 Issue 2 20091. Influence of Leak Path Friction on Labyrinth Seal Inlet Swirl 2. The Dynamic Performance Analysis of Foil Journal Bearings Considering Coulomb Friction: Rotating

Unbalance Response3. Investigation of Electrical Contact Resistance of Ag Nanoparticles as Additives Added to PEG 300 4. U.S. Air Force Perfluoropolyalkylether Experiences 5. First Traction Results of High Spinning Large-Size Circular EHD Contacts from a New Test Rig: Tribogyr 6. Root Cause Failure Analysis of Outer Ring Fracture of Four-Row Cylindrical Roller Bearing 7. Tribology Passive Protection of Friction Pair with Polystyrene8. Study on the Scratch Hardness and Indentation Hardness of Burnished Poly(Oxymethylene) Surfaces 9. Performance of Flat Capillary Compensated Deep/Shallow Pockets Hydrostatic/Hydrodynamic Journal-Thrust

Floating Ring Bearing 10. Wear Behavior of AISI 8620 Steel Modified by a Pulse-Plasma Technique11. Evaluating the Validity of Rolling Contact Fatigue Test Results 12. Assessment of Tribological Coatings for Foil Bearing Applications 13. A Simple Approach to the ThermoElastoHydroDynamic Behavior of Mechanical Face Seals 14. CMP Friction as a Function of Slurry Silica Nanoparticle Concentration and Diameter15. The Static and Dynamic Characteristics of a Two-Lobe Journal Bearing Lubricated with Couple-Stress Fluid 16. Dimensional Stability, Microstructure, and Cohesion Strength of Composite Solid Lubricant Coatings after

Heat Treatment : Author: Malcolm K. Stanford aVolume 52 Issue 3 2009

1. Antiwear Properties and Tribochemical Action Mechanisms of Three S-Containing Triazine Derivatives as Additives in Rapeseed Oil

2. Atomic Layer Deposition of Tungsten Disulphide Solid Lubricant Nanocomposite Coatings on Rolling Element Bearings

Back

(c) Tribology Society of India 2009

S.No. Index 3. Experimental Study on the Performance of Coated Carbide Tools in the Ultra-Precision Machining of

Stainless Steel4. Identification of Bearing and Gear Tooth Damage in a Transmission System5. On the Temperature Rise of Bodies Subjected to Unidirectional or Oscillating Frictional Heating and Surface

Convective Cooling6. Limits of Dynamic Coefficients of Self-Acting Tilting-Pad Gas Bearings7. Friction and Wear Properties of Aluminum-Silicon Alloy Impregnated Graphite Composite (ALGR-MMC) under

Lubricated Sliding Conditions 8. Prediction of Contact Temperature Distribution during Fretting Fatigue in Titanium Alloys9. The Tribological Properties of Fullerene-Like Hydrogenated Carbon (FL-C:H) Film under Different Humidity

Conditions10. Friction in Highly Loaded Mixed Lubricated Point Contacts11. Feasibility Study of Vapor-Mist Phase Reaction Lubrication using a Thioether Liquid12. Aerostatic and Aerodynamic Performance of an Out-Pump Spirally Grooved Thrust Bearing: Analysis and

Comparisons to Static Load Experiments 13. Tribological Properties of Electric Arc-Sprayed CuSn Coating for Bearing Elements14. High Productivity Rough Turning of Ti-6Al-4V Alloy, with Flood and High-Pressure Cooling15. Erosion Wear Analysis of Plasma Sprayed Ceramic Coating Using the Taguchi Technique

16. Enhancing Oil/Water Emulsion Stability: The Use of Capillary Contact Angle Measurements to Determine Liquid/Liquid Interfacial Tensions between Aqueous Alkanolamine Solutions and Oils

Volume 52 Issue 4 20091. Interference-Fit Life Factors for Roller Bearings2. Measurement and Analysis of Inlet Oil Film Thickness in Cold Sheet Rolling with Oil-in-Water Emulsion3. Structural Properties of Foil Bearings: A Closed-Form Solution Validated with Finite Element Analysiss4. Investigation of Chemical/Mechanical Polishing of Niobium5. Tribological Properties of a Magnetorheological (MR) Fluid in a Finishing Process6. A Review on Grease Lubrication in Rolling Bearings7. Tribological Characteristics of WC-Ni and WC-Co Cemented Carbide in Dry Reciprocating Sliding Contact8. Effect of Perfluoropolyether Fluids on Life of Thrust Ball Bearings9. Correlation between the Film Forming Ability and Rheological Properties of New and Aged Low Sulfated Ash,

Phosphorus and Sulfur (Low SAPS) Automotive LubricantsBack

(c) Tribology Society of India 2009

S.No. Index 10. The Role of Antioxidants on the Oxidation Stability of Oils with F-ZDDP and ZDDP, and Chemical Structure of

Tribofilms Using XANES

11. The Effect of a Friction Modifier Additive on Micropitting12. A Study of the Steady-State Performance of a Pressurized Air Wave Bearing at Concentric Position

4. WearVolume 266, Issues 1-2 (5 January 2009)

1. Adhesive wear of stir cast hypereutectic Al–Si–Mg alloy under reciprocating sliding conditions2. Wear of aligned silicon nitride under dry sliding conditions3. Wear mechanisms and scale effects in two-body abrasion4. Two-body dry abrasive wear of cermets5. Wear behaviors of ceramic nozzles with laminated structure at their entry6. Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite

composites produced by in situ powder metallurgy method7. Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite

composites produced by in situ powder metallurgy method8. A procedure for the wear prediction of collector strip and contact wire in pantograph–catenary system9. Wear behaviour of dental enamel at the nanoscale with a sharp and blunt indenter tip10. Inelastic damages by stress wave on steel surface at the incubation stage of vibration cavitation erosion11. Scratch testing of metals and polymers: Experiments and numerics12. Influence of electrical discharge machining on the reciprocating sliding wear response of WC-Co cemented

carbides13. Mechanical and unlubricated tribological properties of titanium-containing diamond-like carbon coatings14. Role of surface texture of harder surface on subsurface deformation15. Formation mechanism of electrical damage on sliding lubricated contacts for steel pair under DC electric field16. Analysis of interface temperature, forward slip and lubricant influence on friction and wear in cold rolling17. Rapid tyre/road separation: An experimental study of adherence forces and noise generation18. Effect of functionally graded material on frictionally excited thermoelastic instability19. Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions20. Reciprocating friction and wear behavior of Ti3AlC2 and Ti3AlC2/Al2O3 composites against AISI52100

bearing steelBack

(c) Tribology Society of India 2009

S.No. Index

(c) Tribology Society of India 2009

21. Triboactive materials for dry reciprocating sliding motion at ultra-high frequency22. Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds23. Solid particle erosion studies on polyphenylene sulfide composites and prediction on erosion data using artificial

neural networks24. Comparative study on rod fretting behavior of different spacer spring geometries25. Tribological study of peroxide-cured EPDM rubber filled with electron beam irradiated PTFE powder26. Simulation of cylinder ‘zero-wear’ process27. Sliding wear of silicon carbide modified by etching with chlorine at various temperatures28. Two-body abrasive behaviour of untreated SC and R-G fibres polyester composites29. Tribological study of novel S–N style 1,3,4-thiadiazole-2-thione derivatives in rapeseed oil30. Tribological properties of Si-containing diamond-like carbon film under ATF lubricated condition31. Comparison of tribological behavior of nylon composites filled with zinc oxide particles and whiskers32. Dry wear of NiAl3-reinforced mechanically alloyed aluminium with different microstructure33. Analysis of load-speed sensitivity of friction composites based on various synthetic graphites34. On the dry and wet sliding performance of potentially new frictional brake pad materials for automotive industry35. Rubber abrasion at steady state36. Influence of varied cryotreatment on the wear behavior of AISI D2 steel37. Analysis based on microcontact mechanism for the roughness dependent stick–slip motion38. Transient rolling of cylindrical contacts with constant and linearly increasing applied slip39. Triboelectrochemical behaviour of a Si3N4–TiN ceramic composite and a titanium alloy commonly used in

biomedical applications40. Correlation of the tribological behaviors with the mechanical properties of poly-ether-ether-ketones (PEEKs) with

different molecular weights and their fiber filled composites41. Cavitation damages on solid surfaces in suspensions containing spherical and irregular microparticles42. Nanometer size wear debris generated from ultra high molecular weight polyethylene in vivo43. Wear behavior of AA1060 reinforced with alumina under different loads44. Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and

counterfaceVolume 266, Issues 3-4 (5 February 2009)

1. Surface modifications in tribological contacts2. Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings3. Comparative study of the tribological behavior of self-lubricating W–S–C and Mo–Se–C sputtered coatings

Back

(c) Tribology Society of India 2009

S.No. Index 4. Mechanical and tribological properties of sputtered Mo–Se–C coatings5. Tribocorrosion behaviour of Ni–SiC nano-structured composite coatings obtained by electrodeposition6. Comparison of self-mated hardmetal coatings under dry sliding conditions up to 600 °C7. Characterisation of ZrO2 layers deposited on Al2O3 coating8. The role of tribology and metrology in the latest development of bio-materials9. Tribo-energetic correlation of tool thermal properties to wear of WC-Co inserts in high speed dry machining of

aeronautical grade titanium alloys10. On the wear of PVD-coated HSS hobs in dry gear cutting

11. A PACVD duplex coating for hot-forging applications12. Minimised gear lubrication by a minimum oil/air flow rate13. Influence of surface treatment of elastomers on their frictional behaviour in sliding contact14. Analytical approach for wear prediction of metallic and ceramic materials in tribological applications15. Influence of surface preparation on roughness parameters, friction and wear

Volume 266, Issues 5-6 (15 March 2009)1. The 11th International Conference on Metrology and Properties of Engineering Surfaces2. Comparing laser and polychromatic confocal optical displacement sensors for the 3D measurement of cylindrical

artefacts containing microscopic grooved structures3. Advances in thick and thin film analysis using interferometry4. Form error analysis of mould insert for large angle lens with ICP algorithm5. Quality assurance —Have we specified it the wrong way round6. Automated bullet-identification system based on surface topography techniques7. Identification of the paint process for steel sheet applications8. Capturing local and anisotropic behaviour in surface topography9. Lead characterisation by an objective evaluation method10. A new wavelet filtering for analysis of fractal engineering surfaces A new free-form surface fitting method for

precision coordinate metrology11. Development of a new traceable areal surface texture measuring instrument12. Dynamic modelling of the fidelity of random surface measurement by the stylus method13. A new look at surface metrology14. Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement15. The evolution of surface topography of injection cams

Back

(c) Tribology Society of India 2009

S.No. Index 16. Evolution of road-surface skid-resistance and texture due to polishing17. New criterion of grain size choice for optimal surface texture and tolerance in belt finishing production18. Development of functional surface by nano-plastic forming19. The influence of surface topography on the photocatalytic activity of electrophoretically deposited titanium dioxide

thin films20. Effect of roughness scale on contact stiffness between solids21. On the influence of surface roughness on real area of contact in normal, dry, friction free, rough contact by using a

neural network22. Study of hair topography modification by interferometry23. Geometrics of tooth wea24. Scale-based correlations of relative areas with fracture of chocolate

Volume 266, Issues 7-8 (25 March 2009)1. The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V2. On the behaviour of obsidian under scratch test3. Effect of Ag nanoparticles additive on the tribological behavior of multialkylated cyclopentanes (MACs)4. A comparative investigation of the wear behavior of PTFE and PI under dry sliding and simulated sand-dust

conditions5. Tribology of polymer injection-molded stainless steel hybrid gear6. Novel polytetrafluoroethylene (PTFE) composites with newly developed Tribaloy alloy additive for sliding bearings7. Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites8. Sliding wear-induced microstructure evolution of nanocrystalline and coarse-grained AZ91D Mg alloy9. Rolling contact fatigue life of AISI 52100 steel balls with mineral and synthetic polyester lubricants with PTFE

nanoparticle powder as an additive10. Temperature as sensitive monitor for efficiency of work in abrasive flow machining11. Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow

finishing (AFF) process12. Friction properties of nano-hydroxyapatite reinforced poly(vinyl alcohol) gel composites as an articular cartilage13. Synergy between tribo-oxidation and strain rate response on governing the dry sliding wear behavior of titanium14. The preparation of PVDF/clay nanocomposites and the investigation of their tribological properties15. A method for obtaining the temperature distribution at the interface of sliding bodies16. Friction and wear properties of short carbon fiber reinforced aluminum matrix composites17. Wear mechanism of multiphase friction materials with different phenolic resin matrices

Back

(c) Tribology Society of India 2009

S.No. Index 18. Morphologies of the wear debris of polyetheretherketone produced under dry sliding conditions: Correlation

with wear mechanisms19. Wear mechanisms in materials with granitic textures—Applicability of a lateral crack system model20. Temperature and division of heat in a pin-on-disc frictional device—Exact analytical solution21. Tribological and hydrothermal behaviour of silicon carbide under water lubrication 22. Using abrasives to remove a toner-print so that office paper might be reused23. Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel

surface at long dry sliding24. Cavitation resistance of Cr–N coatings deposited on austenitic stainless steel at various temperatures25. The effect of hydrogen on friction and wear of Ni–P electroless coating26. Scratch and normal hardness characteristics of polyamide 6/nano-clay composite27. Numerical integration schemes and parallel computation for wear prediction using finite element method28. Duplex SiCN/DLC coating as a solution to improve fretting—Corrosion resistance of steel29. An integrated material removal model for silicon dioxide layers in chemical mechanical polishing processes30. A representative ex-situ fretting wear investigation of orthodontic arch-wire/bracket contacts31. An investigation of friction and wear performances of bonded molybdenum disulfide solid film lubricants in

fretting conditions32. Sliding wear behaviour of T6 treated A356–TiB2 in-situ composites33. Friction behavior of lubricated zinc phosphate coatings34. Tribological studies of polymer based ceramic–metal composites processed at ambient temperature35. A ring area formed around the erosion pit on 1Cr18Ni9Ti stainless steel surface in incipient cavitation erosion36. Friction in a hydraulic motor piston/cam roller contact lined with PTFE impregnated cloth

Volume 266, Issues 9-10 (24 April 2009)1. Tribological properties of polymer-sheet-adhered metal hybrid gear2. Wear transitions in a wear coefficient model3. Wear resistance of annealed plain carbon steels in pre-strained condition4. Wear resistance of annealed plain carbon steels in pre-strained condition Pages 917-9245. Short-pitch rail corrugation: A possible resonance-free regime as a step forward to explain the “enigma”?6. Time dependant measurements of cavitation damage7. Tribological interaction between multi-walled carbon nanotubes and silica surface using lateral force

microscopy8. Tribological properties of γ-Y2Si2O7 ceramic against AISI 52100 steel and Si3N4 ceramic counterparts

Back

(c) Tribology Society of India 2009

S.No. Index 9. Modelling the erosion rate in micro abrasive air jet machining of glasses10. Erosion wear behavior of laser clad surfaces of low carbon austenitic steel11. Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with focused ion beam and

transmission electron microscopy12. Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with focused ion beam and

transmission electron microscopy13. Microstructural modeling of adaptive nanocomposite coatings for durability and wear14. Third body effects in the wear of polyamide: Micro-mechanisms and wear particles analysis15. Wear development on wiper Al2O3–TiC mixed ceramic tools in hard machining of high strength steel16. An investigation into the effect of film thickness on nanowear with amorphous carbon-based coatings17. Impact of die wear and punch surface textures on aluminium can wall

Volume 266, Issues 11-12 (30 May 2009)1. Sliding wear behaviors of in situ alumina/aluminum titanate ceramic composites2. Evaluation of braze bonded hard complex boride based coatings for sliding, erosion and abrasion wear3. Particle size effects on the slurry erosion of aluminium alloy (AA 6063)4. Sliding friction and wear of Cu–graphite against 2024, AZ91D and Ti6Al4V at different speeds5. Effect of transfer layer on dry sliding wear behaviour of cast Al-based composites synthesized by addition of

TiO2 and MoO36. An erosion-based model for abrasive waterjet turning of ductile materials7. Alternation on rolling contact properties of steel due to magnetic field8. Studies on wear behavior of nano-intermetallic reinforced Al-base amorphous/nanocrystalline matrix in situ

composite9. Indirect monitoring of the dynamics at the contact interfaces of a pair of abrading titanium specimens10. Effect of reinforcement coatings on the dry sliding wear behaviour of aluminium/SiC particles/carbon fibres

hybrid composites11. The effects of nickel and carbon concentrations on the wear resistance of Fe–Ni–C austenitic alloys12. Frictional and adhesive behavior of organic–inorganic hybrid coatings on surgical grade stainless steel using

nano-scratching technique13. Microstructure and wear resistance of low temperature hot pressed TiB214. Effect of counter materials on coefficients of friction of TiN coatings with preferred grain orientations15. Thermo-mechanical analysis of the magnetic head–disk interface with a fractal surface description

Back

(c) Tribology Society of India 2009

S. No. Index 16. Tribological properties of MoS2 nano-balls as filler in polyoxymethylene-based composite layer of three-layer

self-lubrication bearing materials17. Fretting wear behaviors of nanometer Al2O3 and SiO2 reinforced PEEK composites18. Techniques for assessment of wear between human cartilage surfaces19. Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts20. Reduction of erosion rate by particle size distribution (PSD) modification of hematite as weighting agent for oil

based drilling fluids21. Microstructural characterization of the tool–chip interface enabled by focused ion beam and analytical

electron microscopy22. Dry sliding wear behaviour of plasma electrolytic oxidation coated AZ91 cast magnesium alloy

6. Indian Journal of Tribology

Volume 4, No. 1, January-June-20091. Effect of running-in wear on the performance characteristics of a hydrodynamic journal bearing system2. Effect of shot peening on the abrasive wear behaviour of medium carbon steels3. A comparative study on condition monitoring of rolling element bearings4. Effects of substrate surface finish on tribological performance and surface topology of Hi-HVOF sprayed WC-

Cr-Ni cermet coating5. Reduction in wear rate of rolls using roll bite lubrication is hot strip mill6. Constant flow valve compensated hole-enty hybrid journal bearing lubricated with ER fluid

7. Journal Lubrication Science(From 2009 Journal of Synthetic Lubrication and Tribotest will be also incorporated in this Journal)

Volume 21 Issue 1 , January 2009 7. Optimum shape design for surface of a porous slider bearing lubricated with couple stress fluid 8. Analysis of the pour point of coconut oil as a lubricant base stock using differential scanning calorimetry  9. Experimental model for creep groan analysis 

Volume 21 Issue 2 , February 2009 10. Development of a test device for the evaluation of fretting in point contact  11. A methodology for the assessment of the tribocorrosion of passivating metallic materials 

BackS. No. Index

(c) Tribology Society of India 2009

12. Nano Si3N4 composites with improved tribological properties  Volume 21 Issue 3 , March 2009

13. Contact size effect on fretting wear behaviour: application to an AISI 52100/AISI 52100 interface  14. Chemical structure of phosphazenes in relation to the tribological properties of a steel-on-steel system  15. Tribological performances of heterocyclic-containing ether and/or thioether as additives in the synthetic

diester  Volume 21 Issue 4 , April 2009

16. Effect of contact configuration on the durability and friction coefficient of pressure-sprayed MoS2 coatings under fretting conditions

17. Initial exploration of tribological performance of novel triazine derivatives in water 18. Feasibility of using digital speckle correlation in the study of seal contacts19. New synthetic esters with a complex structure considered as tribological fluids

8. Journal of Tribology

Volume 131, Number 1, January 20091. Using Design of Experiments to Analyze the Connecting Rod Big-End Bearing Behavior2. Dynamic Analysis of Cage Stress in Tapered Roller Bearings Using Component-Mode-Synthesis Method3. Friction Measurement in the Biaxial Rocking Motion Hip Joint Simulator4. Evaluation of DLC Coatings for High-Temperature Foil Bearing Applications5. Elastic-Plastic Wheel-Rail Thermal Contact on Corrugated Rails During Wheel Braking6. On a Simplified Model for Numerical Simulation of Wear During Dry Rolling Contacts7. Plastic Yield Conditions for Adhesive Contacts Between a Rigid Sphere and an Elastic Half-Space8. Experimental Study of a Creeping Polymer Sphere in Contact With a Rigid Flat9. A Three-Dimensional Deterministic Model for Rough Surface Line-Contact EHL Problems10. Ultrasonic Measurement of Rolling Bearing Lubrication Using Piezoelectric Thin Films11. Traction in EHL Line Contacts Using Free-Volume Pressure-Viscosity Relationship With Thermal and

Shear-Thinning Effects12. Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of

Cobalt-Based AlloysH. Yu, R. Ahmed, H. de Villiers Lovelock, and S. Davies

13. Static and Dynamic Characteristics of Oil Lubricated Beveled-Step Herringbone-Grooved Journal BearingsBack

(c) Tribology Society of India 2009

S. No. Index 14. Numerical Approach for Solving Reynolds Equation With JFO Boundary Conditions Incorporating ALE

Techniques15. Analysis on Dynamic Performance of Hydrodynamic Tilting-Pad Gas Bearings Using Partial Derivative

Method16. A Bubble Dynamics Based Approach to the Simulation of Cavitation in Lubricated Contacts17. Experimental Study on the Stabilization of Small-Bore Journal Bearings by Controlling Starved Lubrication

and Bearing Orientation Angle18. The Tribological Study of Novel Benzotriazolyl-Containing Anticorrosive Polysulfides in Rapeseed Oil19. Full EHL Simulations Using the Actual Ree–Eyring Model for Shear-Thinning Lubricants20. Loading Velocity Effect in the Load/Unload Systems With Multiple Flying Height States21. Analytical and Experimental Elastic-Plastic Impact Analysis of a Magnetic Storage Head-Disk Interface22. Measurement and Sources of Lateral Tape Motion: A Review23. Stress Induced Permanent Magnetic Signal Degradation of Perpendicular Magnetic Recording System24. Direct Simulation Monte Carlo Method for the Simulation of Rarefied Gas Flow in Discrete Track Recording

Head/Disk Interfaces25. A Particle-Augmented Mixed Lubrication Modeling Approach to Predicting Chemical Mechanical Polishing26. Friction and Wear Behavior of Graphite-Carbon Short Fiber Reinforced Al–17%Si Alloy Hybrid Composites27. Lubrication and Surface Properties of Roach Cuticle

Volume 131, Number 2, April 20091. Rotordynamic Performance of Flexure Pivot Tilting Pad Gas Bearings With Vibration Damper2. A Discrete Element Approach for Modeling Cage Flexibility in Ball Bearing Dynamics Simulations3. Analysis of Multirecess Hydrostatic Journal Bearing Operating With Micropolar Lubricant4. Effect of Coating Thickness on the Friction Coefficients and Torque-Tension Relationship in Threaded

Fasteners5. Frictional Energy Dissipation in a Rough Hertzian Contact6. A Numerical Static Friction Model for Spherical Contacts of Rough Surfaces, Influence of Load, Material, and

Roughness7. Static Friction Model of Elastic-Plastic Contact Behavior of Surface With Elliptical Asperities8. The Effect of Surface Roughness on Static Friction and Junction Growth of an Elastic-Plastic Spherical

Contact9. Multiple Contacts of Similar Elastic Materials

Back

(c) Tribology Society of India 2009

S. No. Index 10. Transient Thermomechanical Analysis of Sliding Electrical Contacts of Elastoplastic Bodies, Thermal

Softening, and Melting Inception11. Creep Relaxation of an Elastic–Perfectly Plastic Hemisphere in Fully Plastic Contact12. Three-Dimensional Semiperiodic Line Contact–Periodic in Contact Length Direction13. A Multilevel Model for Elastic-Plastic Contact Between a Sphere and a Flat Rough Surface14. Asperity Creep Measured by the Reflection of Ultrasound at Rough Surface Contact15. Soft EHL Simulations of U-Cup and Step Hydraulic Rod Seals16. Experimental and Numerical Study of Air Entrainment Between Web and Spirally Grooved Roller17. The Validity of Linear Elasticity in Analyzing Surface Texturing Effect for Elastohydrodynamic Lubrication18. Thermomechanical Coupling in Oscillatory Systems With Application to Journal Bearing Seizure19. Steady State Performance Characteristics of Single Pad Externally Adjustable Fluid Film Bearing in the

Laminar and Turbulent Regimes20. Thermohydrodynamic Study of Multiwound Foil Bearing Using Lobatto Point Quadrature21. Application of the Amplitude Reduction Technique Within Probabilistic Rough EHL Models22. Analysis of a Porous Elastic Sheet Damper With a Magnetic Fluid23. A Numerical Simulation Method to Evaluate the Static and Dynamic Characteristics of Flying Head Sliders on

Patterned Disk Surfaces24. A Simplified Dynamic Model for the Analysis of the Slider Off-Track Motion Due to Head-Disk Interactions25. High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock26. Study on Contact Characteristic of Nanoscale Asperities by Using Molecular Dynamics Simulations27. Load-Independent Spin Power Losses of a Spur Gear Pair: Model Formulation28. Oil Churning Power Losses of a Gear Pair: Experiments and Model Validation29. A Voronoi Finite Element Study of Fatigue Life Scatter in Rolling Contacts30. Evaluation of Rayleigh–Plesset Equation Based Cavitation Models for Squeeze Film Dampers31. Partial Contact of an Elastic Coated Cylinder Pressed by a Rigid Flat Surface32. Prediction of Steady State Adhesive Wear in Spur Gears Using the EHL Load Sharing Concept33. An Adhesion Model for Elastic-Contacting Fractal Surfaces in the Presence of Meniscus

Back

(c) Tribology Society of India 2009