relationship foreverface shuttering plywood. as a result, it has high density and more repetition....
TRANSCRIPT
RELATIONSHIP FOREVER
www.globepanel.in GLOBE PANEL INDUSTRIES INDIA PVT. LTD.(AN ISO 9001 & 14001 CERTIFIED COMPANY) Smooth Surface Clean Look Smart Buildings
Filmface Shuttering Plywood
Globe Panel Industries (I) Pvt. Ltd. is an ISO
9001 and 14001 certified company that
m a n u fa c t u r e s t h e r e n ow n e d b r a n d
“G L Plywood”. The company is a pioneer in the
sector with its thrust on cherishing
relationships forever. We celebrate our
commitment to quality and Indian values as we
reach towards various milestones. With its
sincere efforts in developing quality products
since its inception in the year 1992, GL has
carved a niche for itself in the wood industry.
The Company
Treasure your relationship,not your possessions.At GL, we value your relationships.
We know how much trust you endow to build a relationship…
how long it takesto walk together...
how colorful the celebration is when it is shared together…
That is why, we believe in creating a...
P R O D U C T R A N G E :PLYWOOD IS:303
MARINE PLYWOOD IS:710
DECORATIVE PLYWOOD IS:1328
FLUSH DOOR IS:2202
DECORATIVE DOOR
FILMFACE SHUTTERING PLYWOOD IS:4990
LAMINTES IS:2046
Reason to choose GL film face shuttering plywood
Best Selected Raw MaterialsCore Veneer:
Resin:
Film Paper:
Core veneer is the base of good Film face shuttering plywood, we use high density and smooth core as a result it has better strength, less swelling, less bending and thus provides more repetition than others.
Resin is used for the bonding of core veneers. Since Film face shuttering ply is used in highly moisture prone areas and it remains directly in contract with water. Therefore, we use ISI grade undiluted PF resin of high solid content, which provide better bonding of core.
Film paper is laminated on the outer surface of film face shuttering plywood to make it 100% waterproof. As paper will be of good quality then it will enhance the life of film face shuttering ply. Therefore, we use high GSM paper, which is coated with phenol, which makes GL film face shuttering ply 100% waterproof and results in more repetition.
India’s Best Machinery for Flawless ProductHigh capacity hydraulic hot press:
Better paper impregnation plant:
A good quality press in which plywood is made plays an impotent role in making good quality high-density film face shuttering plywood. We have installed 2400-tone hydraulic press to manufacture GL film face shuttering plywood. As a result, it has high density and more repetition.
Modern and highly precise paper impregnation plant is stalled in plant for the coating of phenol on paper film. It equally spread the chemical on paper, as a result GL film face shuttering plywood has equal thickness, better strength and better finish.
Research and DevelopmentIn-house testing lab for flawless product:
Treated core veneer:
Keeping in mind to provide the uniform & better quality product forever, we have modern and highly sophisticated lab, which is equipped with all testing equipments as per BIS. Each batch of production is tested in lab by an IPIRTI qualified chemist.
Wood is more prone to termite and borer attack so that core veneers in GL film face shuttering plywood is treated with latest anti termite borer chemicals. Therefore, GL film face shuttering plywood safe against the termite , borer and fungus attack which generally happens during stacking after shuttering work with other brands.
Thickness
Weight
Size
Density
Application
Resin
12mm, 16mm, 18mm, 21mm
23kg, 30kg, 34kg, 36kg, 38kg
2440mm x 1220mm
30.65 to 1.10gm per cm
buildings, bridges, Heavy Industry & Structures etc. for use on walls, slabs,
columns and beams etc.
BWP Phenol Formaldehyde synthetic resin as per BIS 848: 1974
Tips for maintenance to increase the life of Shuttering plywood:
•
•
•
•
•
FFDSP should be stored in packs on a flat and raised surface in a clean, dry and covered place with free circulation of air.
The boards and stacks shall be protected from rain and dampness.
The Edges of a board in a pack shall be in a straight vertical line.
Extra care should be taken to avoid any scratches.
The plywood boards shall not be dragged over one another, as this would scratch the surface. If the
edges are dragged on faces or any extraneous matter, like sand or small stone particles lie in between the surfaces.
Cut edges of the plywood at the time of making concrete former should also be coated with suitable sealants like chlorinated rubber paint, for longer life of the board.
For better repetition, panels should be dried by stacking in free circulation of air and on suitable spacers after each use.
•
•
100% Hard Core Veneer
100% Water Proof
RESIN
ISI grade undiluted PF resin
Super Strong
Higher GSM Paper
Higher Repetition
Surface is extremely Hard and Smooth
Mirror finish on both sides
•
•
•
•
•
•
•
•
•
It is calibrated plywood, which ensures the uniform thickness and excellent finish.
It is 100% boiling waterproof and exceeds the boiling test as per BIS.
Extra thick face veneer makes its surface more solid.
Extra layers of core veneer for high density and extra strength.
It has high insulating properties, which helps to proper setting of cement and concrete.
100% treated core and ply which makes it safe with the attack of micro organisms
Dimensionally stable
Mirror finish for smooth shuttering work
Scratch resistant surface
Unique features which makes it different from others:
R E L A T I O N S H I P F O R E V E R
For a stronger bonding that
never make us
apart!
Densified CHEQUERED PLYWOOD
GL Chequered Ply Board is high density grade plywood produced under high heat and pressure using un-extended PF Resin. The Ply has a chequered pattern on its surface that comes from the wire mesh put during pressing. Because of high pressure the panel develops high density that sustains the rigorous of flooring in public use. This not only eliminates the smooth surface of ordinary plywood but also makes it anti-slip plywood.
The plywood combines enhanced mechanical properties with extreme water proof quality besides being resistant to corrosive agents.
Dimensions Requirements Observation Values
1. Length 2440 + 6 2442mm- 0
2. Width 1220 + 3 1222mm- 0
3. Thickness 12mm 11.90mm
4. Squareness 2mm/1000mm 0.55mm
5. Edge Straightness 2mm/1000mm 0.50mm
6. Workmanship & finish Clause Satisfactory
Physical Properties
7. Density 0.84 0.867
8. Moisture Content 5-15% 6.80%
9. Bond Quality Test a) No visible delamination SatisfactoryBoiling – Drying @ 60+_ 2oc in glue line and plywood face4 Hrs. – 20 Hrs. b) No forcible separation andThree Cycles fibre should be adhered Satisfactory
between plies
10. Breaking Strength 200kgf 220kgf250 x 50 x Thickness (mm)
11. Static Bending Strength2 2Along the grain M.O.E. Avg. – 7500N/mm 18528.32N/mm2 2
Ind. – 6700N/mm 12620.25N/mm2 2Across the grain M.O.E. Avg. – 4000N/mm 15308.24N/mm2 2Ind. – 3600N/mm 9415.78N/mm
2Along the grain M.O.R. Avg. – 50N 100.81N/mm2Ind. – 45 75.32N/mm2Across the grain M.O.R. Avg. – 30 85.39N/mm2
Ind. – 27 67.86N/mm2 212. Tensile Strength as Along 420kg/cm 568kg/cm2 2per ASRTU Across 325kg/cm 495kg/cm
2 2Total 745kg/cm 1063kg/cm
DENSIFIED CHEQUERED PLYWOOD