PART- 2 PRICE-BID (SCHEDULE OF QUANTITIES)

RENOVATION OF WASHROOMS IN NABARD HEAD OFFICE, BKC, BANDRA(E), MUMBAI-51

SR NO. PARTICULARS QTY. UNIT. RATE (Rs.) AMOUNT. (Rs.)

ADISMANTLING & DEMOLITION OF TOILET BLOCK INCLUDING ITS COMMON PASSAGE AREA

( FOR 17 TOILET BLOCKS IN GR FL AND 8 UPPER FLOORS)

1

Dismantling existing 115mm-230mm thick brick / siporex wall along with existing wall cladding tiles and cement

plaster carefully by using hand cutting machine / chisel to cut and making opening for door / window as per the

drawing and instruction of the Architect/Bank's Engineer and also making good wall edges with CM 1:4 /PCC 1:2:4

with non-shrinkage cementitious compound including removal of debris from site, cost of material, equipment and

labour charges, curing, cleaning, scaffolding, etc., Complete. L. S

2

Dismantling existing marble,granite, ceramic tile or other flooring with mortar backing upto existing brick bat coba

filling and dismantling marble, granite, ceramic tile skirting, ceramic tile /granite slab wall dado etc., with mortar

backing and also dismantling wash basin counters of concrete, marble, granite or other materials etc. with mortar

backing, wherever required, including cleaning of existing cement plastered surface and concrete surface / brick

bat coba waterproofing surface in a manner which facilitate laying of new flooring /plastering/ wall dado / tile

clading without undue extra expense. The rate shall include removal of debris from site including costs of all

materials,equipments, labour charges, curing, cleaning etc. complete. (contractor shall visit the site for inspection

before quote).

L. S

3

Dismantling existing doors/windows/M S grillwork,false ceiling, electrical censors, exhaust fans, electrical cables /

fittings,existing plumbing fittings, pipes, M S Jali, CI pipes , mirrors, towel rods,soap dispensers, picture frames, all

fixed furniture such as partitions, mirrors, sanitary fittings, CP fittings, concealed/open water supply / drainage

plumbing pipes, etc. CP fittings, door closers, exhaust fans, electric lights and soap dispensers shall be removed

without any damage and shall be handed over to the bank's care taker. The removed electrical(PIR) censors and

electrical hand dryers shall be kept under safe custody of the contractor for refixing the same with the renovation

work. The rate shall include stacking of items such as door frames, shutters, aluminium false ceiling panels,

elctrical cables and fittings, etc. and shall include all incidental work, cutting and making good walls and floors

with CM 1:4 /PCC 1:2:4 with non-shrinkage cementitious compound wherever necessary, etc., complete, as

directed by bank's engineer/ architect/consultant. The rate shall include removal of debris from site including costs

of all materials,equipments, labour charges, curing, cleaning etc. Complete (contractor shall visit the site for

inspection before quote).

L. S

TOTAL (A)

B CIVIL WORKS

1

Constructing 115 mm thk. siporex brick wall in 1:5 cement mortar. Bricks used shall be of best quality, having

sharp edges and giving clear ringing sound when struck against each other. A 100mm thick RCC patli beam with

nominal reinforcement shall run horizontally @ 900mm and at 2100 mm heights. The rate shall be inclusive of any

scaffolding required, including costs of all materials,equipments, labour charges, curing etc. Complete.

200 Sqm

2

Strengthening the existing partition brick work masonry wall (if necessary as per the advise of Bank's

Engineer/Architect) by pointing the damaged joints with Cement Mortar 1:3 with polymer bonding agent Roff

Bond Repair or equivalent in the proportion 300 g of polymer per bag of cement including costs of all materials,

scaffolding, labour charges, curing etc. complete. 1037 Sqm

3

Providing and applying cement sand plaster (internal) of 1:4(1 cement and 4 sand) proportion to existing/new

brick/RCC walls and ceiling with average 15mm thick with additives of integral water proofing agent and polymer

bonding agent of make roffe or equivalent as per manufacturing specifications and finished rough to receive

ceramic tile dado / plaster of paris levelling punning coat. The rate shall be inclusive of removing the existing

cement plaster, any scaffolding required,including costs of all materials,equipments, labour charges, curing, etc.

Complete. 4350 Sqm

4

Supplying and applying water proof film of Zydex Industries over existing brick bat coba concrete surface and all

round the wall upto 600mm height from the concrete floor as per manufacturer specification as per the details

below: Clean the surface completely and remove all loose particles and existing damaged waterproofing layers and

dry the surface completely. Loose plastered surface if any shall be removed and re-plastered with CM 1:4 as

mentioned in item No.2 including repairing of brick bat coba concrete surface wherever necessary using 1:4:8

mix(1 cement, 4 sand and 8 brick bats) upto 150mm thick with integral water proofing compound of pidilite/fosroc

make. Before applying water proof layer, cracks on the surface shall be filled with with Zyco prime and cement in

the ratio 1:2.5 and cure for a day. Then Supplying and applying Zycosil, Zyco prime and water in the ratio 1:2:20 by

volume using pressure pump and nozle till the surface attains complete saturation and leave the surface for drying

for a day. The rate shall include costs of all materials, labour charges, curing, scaffolding etc. complete as directed

with 5 years performance guarantee.

1605 Sqm

5

REPAIRS TO DAMAGED STRUCTURAL MEMBERS WITH POLYMER MODIFIED MORTAR (PMM) IN

INTEROR AREA:

Chip-off/Breaking, corrosion damaged/cracked/spalled concrete including plastering along the cracks on

structural members such as beam/column/sunshade or any other structural members carefully by low impact

Hammer Breaker (electrically operated) without damaging the structure and make sure that the contaminated

concrete is removed completely, including removing and stacking of all unserviceable material at site,

simultaneous transportation and disposal of debris outside colony etc. Complete.

Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing using strong emery paper

and finally by rust remover acetone (Rusticide or equivalent) and make sure that there are no traces of rust on the

surface of existing rebars. Cleaning the reinforcement and the concrete surface thoroughly with potable water

and keeping the surface for drying. Mix the base and hardener of the zinc rich epoxy resin(Nito Zinc Primer of

Fosroc or equivalent) mechanically using a slow speed heavy duty drilling machine fitted with mixing paddle. Apply

the mixed materials with brush on the cleaned rebar in two coats with time interval of minimum 4 hours between

each coat and allow it to dry complete as directed.

Wet the concrete surface with potable water and make sure that the surface is kept moist so that the

water cement ratio in the polymer modified mortar is maintained during the application.

Repairing the surface after carrying out above operations by supplying and applying polymer modified

mortar of average 40 mm thick in layers not exceeding 20 mm in a day in the proportion 1 : 5:15 ( 1

Polymer: 5Cement: 15 Quartz sand ) by weight followed by a smooth finish after applying (by brushing)

polymer based jointing compound by mixing the polymer and cement in the ratio of 1:1 by volume to the

prepared surface as per the specification of manufacturer or as directed.

The rate shall be for the work at all levels of floors including costs for all materials, labour charges,

scaffolding with working platforms, proper covering of the floors / windows / fixtures / furniture/ with 50 Sqm

6

Supplying and fixing in position 16mm-18mm thick new machine mirror polished granite slab jamb in two levels of

300 mm wide (with overlap of 25mm) with edge moulding polishing for doors/windows in the grout of Polymer

Tile adhessive of Balendura Diamond or equivalent with cement in the ratio 2:1(2 Polymer tile adhessive and 1

cement) including costs of all materials,equipments, labour charges, curing etc. Complete . (Basic rate of

granite=Rs.175/- per sft) 1500 m

TOTAL (B)

CFLOOR / SKIRTING / WALL DADO FINISHES

*

Cost to be inclusive of taping on all the joints and covered the entire flooring with good quality plastic (300

microns) and POP above. Cover and tape to be removed before final cleaning etc., complete as per instructions

of banks engineer/architect.

1

Supplying and fixing 16mm-18mm thick machine mirror polished granite slab of approved colour and approved

texture in 1:4 cement mortar (1 cement and 4 sand) bedding of average 25 mm thick in proper line and level

including cement slurry with required slope for flooring and filling the joints with Roff/Bal-endura make polymer

joint filling compound of the same shade of the granite. The rate includes costs of all materials,equipments, labour

charges, curing, rubbing, washing, cleaning the surface etc. Complete as per instructions of banks engineer /

architect. Etc. Complete. (Basic cost of polished granite slab Rs.175/- per sft)

1255 Sqm

2

Supplying and fixing 16mm-18mm thick machine mirror polished granite skirting having approximate width of

150mm of approved colour and texture using cement and tile adhessive(diamond star of Bal-endura make or

equivalent) mixture grout of average 12mm thick in the ratio 1:2 in proper line and level and filling the joints with

Roff/Bal endura make joint filling compound of the same shade of the granite. The edges of skirting shall be

shamphered/moulded and polished. The rate includes costs of all materials,equipments, labour charges, curing

rubbing, washing, cleaning the surface etc. Complete as per instructions of banks engineer / architect. (Basic cost

of polished granite slab rs.175/- per sft)

3200 m

3

Providing & laying 600mm x300mm x 8 mm digital ceramic glazed wall tile of first quality in approved colors and

pattern to walls in required position using cement and tile adhessive(diamond star of Bal endura make or

equivalent) mixture grout of average 10mm thick in the ratio1:2 in proper line and level and filling the joints with

roff/balendura make joint filling compound of the same shade of the tiles. The rate includes costs of all

materials,equipments, labour charges, curing, rubbing, washing, cleaning the site etc. Complete as per instructions

of banks engineer / architect. (Basic rate of ceramic wall tile rs. 60/-

per sft.) (make kajaria/H&R Johnson/RAK).

3000 Sqm

4

Highlighter tiles - supplying and fixing digital printed ceramic glazed highlighter tile 300mmx300mmx8mm in

design to walls in required position using cement and tile adhessive(diamond star of Bal Endura make or

equivalent) mixture grout of average 10mm thick in the ratio 1:2 in proper line and level and filling the joints with

roff/balendura make joint filling compound of the same shade of the tiles. The rate includes costs of all

materials,equipments, labour charges, curing, rubbing, washing, cleaning the site etc. Complete as per instructions

of banks engineer / architect. (Basic cost of highlighter tile rs.75/- per sft) (make kajaria/H&R Johnson/RAK)

400 Sqm

5

Supplying andfixing platform of 600mm depth(clear) for toilet wash basin at height 825 mm above floor level.with

16mm-18mm thick factory mirror polished granite slab without cracks including chamfering and polishing the edge

with 16mm thick machine polished chamfered edge back splash skirting granite having width of 150mm. The

granite slab platform shall be supported on 35 mm to 40 mm thick cuddapah slab horizontally. The kadappah slab

shall be rested at one end on the vertical double granite support of approximate size of 600mmx825mmx18mm

with each single side machine polished and sandwitched with cm1:4 with vertical 50mm wide machine polished 16-

18mm thick granite slab facia with edge polish and other side will be supported on existing side brick wall.

Inbetween the end supports, the kadappah slab shall be supported on ms angle brackets having size

600mmx300mm with section of 50mmx50mmx6mm at spacing of 750mm c/c. A 300 mm wide, 16-18mm thick

machine polished granite facia with edge polish shall be provided below the chamfered edge of counter as per

design. The rate shall include the profile cutting and fixing of undercounter wash basin and polishing the surfaces /

edges including costs of all materials,equipments, labour charges, curing, rubbing, washing, cleaning the surface

etc. Complete as per instructions of banks engineer / architect. (Basic cost of polished granite slab= Rs175/- per

sft.)

153 m

TOTAL (C)

DPAINTING WORK

1

Supplying and applying 3 coats of Luxury Acrylic Interior Emulsion Paint of Royale of Asian paints or equivalent in

ICI/Nerolac of aproved shade to surface as per manufacturer's specifications after cleaning and preparing the

surface with birla white wall care putty upto 3mm thick whereever required, one coat interior acrylic putty and

then one coat of interior primer including staging / scaffolding on walls, columns and ceiling etc.painting should be

applied with rollers including costs of all materials,equipments, labour charges, curing, rubbing, washing, cleaning

the site etc. Complete as per instructions of banks engineer / architect.

1650 Sqm

TOTAL (D)

EFALSE CEILING & VENTILATION GRILLS

1

Supplying and fixing suspended gypsum flat & coffered false ceiling of 12 mm thick gypsum board with 600 mm c/c

GI specified frame work, which includes providing and fixing g.i. perimeter channels of size 0.55mm thick having

one flange of 20mm and another flange of 30mm and a web of 27mm along theperimeter with ceiling screws fixed

to brick wall / partition with the help of nylon sleeves and screws at 600 mm c/c, then suspending GI intermediate

channels of size 45mm x 0.9mm thick with 2 flanges of 15mm each from the soffit with GI and steel expansion

fasteners ony, "fasteners" shall be used for ceiling supports ony. Ceiling section of 0.55mm thickness having

knurled verb of 51.5mm and two flanges of 26mm each with lips of 10.5 mm are then fixed to the intermediate

channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457 mm

c/c. 12.5 tapered edge gypboard (conforming to is-2095-1982) is then screws fixed to ceiling to ceiling section with

25mm drywait at 230 mm c/c, additional supports for ac / ventillator grill shall be fixed as per instructions and ac

and ventillator plan / section / layout. The removed existing electric censors shall be re-fixed appropriately on the

false ceiling as per instructions of banks electrical engineer.

*screw fixing is done mechanically with screw driver of drilling machine with suitable attatchment. The boards are

to be jointed and finished so as to have a flush look, which includes filling and finishing the tapered and square

edges of the boards with jointing compoind, paper tape. The rate includes costs of all materials,equipments, labour

charges, curing, rubbing, cleaning the site etc. Complete as per instructions of banks engineer / architect.

Note:- for light fittings, grills diffusers and cutouts, speakers, fire detectors, etc have to be made with the frame of

perimeter channels of size 20 x 27 x 30mm x 0.54 mm thick, supported suitable as per direction of banks

engineer/architect/ electrical & ac consultants. No additional payment will be made for this work.

1485 Sqm

2

Supplying and fixing suspended 12 mm thick gypsum board band of width not more than 6" for coffered false

ceiling and indirect lighting, which includes providing and fixing g.i. perimeter channels of size 0.55mm thick having

one flange of 20mm and another flange of 30mm & a web of 27mm along the perimeter with ceiling screws fixed

to brick wall / partition with the help of nylon sleeves & screws at 600 mm c/c, then suspending g.i. intermediate

channels of size 45mm x 0.9mm thick with 2 flanges of 15mm each from the soffit with g.i. and steel expansion

fasteners ony, "fasteners" shall be used for ceiling supports ony. Ceiling section of 0.55mm thickness having

knurled verb of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate

channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457 mm

c/c. 12.5 tapered edge gypboard (conforming to is-2095-1982) is then screws fixed to ceiling to ceiling section with

25mm drywait at 230 mm c/c. Additional supports for ac grill shall be fixed as per instructions and ac plan / section

/ layout. *screw fixing is done

mechanically with screw driver of drilling machine with suitable attathcment. The boards are to be jointed and

finished so as to have a flush look, which includes filling and finishing the tapered and square edges of the boards

with jointing compoind, paper tape. The rate includes costs of all materials,equipments, labour charges, curing,

rubbing, cleaning the site etc. Complete as per instructions of banks engineer / architect. Note:- for light fittings,

grills diffusers and cutouts, speakers, fire detectors etc. Have to be made with the frame of perimeter channels of

size 20 x 27 x 30mm x 0.54 mm thick, supported suitable as per direction of bank's engineer/architect/electrical &

ac consultants. No additional payment will be made for this work.

1230 m

3

Supplying Aluminium powder coated ( minimum 50micron powder coating) standard ventillator grill with frame of

150mm wide as approved by banks Engineer/Architect and fixing to false ceiling including costs of all materials,

labour charges, cleaning etc. Complete. 50 m

TOTAL (E)

FFIXED FURNITURE AND CARPENTRY WORKS

1

Supplying and fixing in position 35 mm thick solid core marine flush door of kutty make or equivalent with clear

shutter size 900mmx2100mm and 1000mm x 2100mm (with 6 mm thk glass window of approx. Size 300mm x

450mm) and 450mmx150mm aluminum powder coating(50 micron) grills, finished with 1.0 mm thick laminate of

approved make and pattern from both side using fevicol make approved grade adhessive inclusive of heavy duty

brass hinges of 100 x 25mm (3-4no. Per shutter), 6" brass heavy tower bolt along with approved make cylindrical

lock without key of godrej or equivalent make and teak wood beeding with melamine polish wherever required

and applying matching synthetic enamel paint two coats after a coat of wood primer on the edge of the door

shutterfor the internal and external main door shutters of toilet and complete all as per drg.,details and as directed

complete. The rate includes costs of all materials, equipments, labour charges, rubbing, cleaning the site etc.

Complete as per instructions of banks engineer / architect. Measurement shall be taken as per actual finished area

of the shutter on any one face.

336 Sqm

2

Modifying the existing Maindoor shutter of approximate size of 1000mm x 2100mm to Toilet Passage area by

removing the existing laminate and fixing new 1mm thick laminate of approved make and shade using fevicol make

approved grade adhessive along with approved make mortise lock of godrej or equivalent make with key as

provided in the model washroom at 5th Floor B-wing and teak wood beeding with melamine polish and applying

matching synthetic enamel paint two coats after a coat of wood primer on the edge of the door shutter and on

the Door frames as directed complete. The rate includes costs of all materials, equipments, labour charges,

rubbing, cleaning the site etc. Complete as per instructions of banks engineer / architect.

34 No

3

Sliding door shutter / openable outside size 900mm x2100mm with (with 6 mm thk milky opaque glass window of

approx. Size 300mm x 450mm) and 450mmx150mm aluminum powder coating (50 micron) grills, finished with 1.0

mm thick. Laminate of approved pattern from both side inclusive of heavy duty brass hinges of 100 x 25mm (3-

4no. Per shutter) along with approved make cylindrical lock of godrej or equivalent make without key and teak

wood beeding with melamine polish wherever required and applying matching synthetic enamel paint two coats

after a coat of wood primer on the edge of the door shutter for the door shutter of toilet ,sliding channels of

approved make with all required hardware’s etc. And complete all as per drg., details and as directed complete.

The rate includes costs of all materials, equipments, labour charges, rubbing, cleaning the site etc. Complete as per

instructions of banks engineer / architect.

20 Sqm

4

Supplying and fixing hydraulic door closer of heavy duty capacity of Sterling make or equivalent for the main

washroom doors between passage and washroom area. The rate includes costs of all materials, labour charges,

non-corrossive fastners etc. Complete. 59 No.

5

Supplying and fixing 16 guage aluminium powder coated ( minimum 50micron powder coating) ventillator frame of

size 50mmx25mm with adjustable aluminium 100 mm size louvers and provided with with 100mm wide and 5mm

thick pinned glass. External face of ventillator shall be covered with GI rat mesh fixed in 25mmx12 mm, 16guage

alumnium powder coated frame with f channel and to be fixed on the wall. The rate including costs of all materials

including non corrossive fastners, labour charges, scaffolding, cleaning etc. Complete

60 Sqm

6

Supplying and fixing partition in between urinals, made out of 16-18mm thick both side machine mirror polished

hard granite slab of approved shade with edge shamphered/moulded with polish as shown in the detailed drawing

complete as per bank's engineer/architect's instructions. The approximate finished size of the partition shall be

400mm x 1200 mm as per the design given by the Architect and slab shall minimum 50mm be inserted inside the

masonry and gap shall be properly filled with polymer based tile adhessives of Balendura Diamond star or

equivalent. The rate includes costs of all materials,equipments, labour charges, rubbing, curing, cleaning the site

etc. Complete as per instructions of banks engineer / architect. The measurement shall be taken only for exposed

finished surface at one face of the slab.35 Sqm

7

Supplying and fixing 12mm thick toughened glass for dressing table with machine polished edges and fixed to the

walls with heavy duty SS 304 grade 'D' brackets , and as shown in the detailed drawing complete as per bank's

engineer/architect's instructions. The rate includes costs of all materials,equipments, labour charges, rubbing,

cleaning the site etc. Complete as per instructions of banks engineer / architect.2 Sqm

8 SHUTTER BELOW SINK

Providing & fixing shutters below sink area with 19 mm thk marine grade ply wood (Century club or equivalent)

finish with approved shade 1mm thk laminate using approved brand of fevicol adhessive on exposed surface and

internal surface with French polish finish with matching polished edge lipping with framework in 50 x 35 mm

second class termite treated teakwood sections duly matching French polished & complete as directed by

architect. 9 Sqm

9 MIRROR

Supplying and fixing in position 6 mm thick bevelled edge clear mirror covers with waterproofing film on back side

and fixed with 9 mm thk marine ply wood backing having painted with two coats of synthetic enamel paint over a

coat of a wooden primer on all surface and fixing with required number of 3/4" dia stainless steel button knob

screws of required size and complete all as per drg.,details and as directed.

125 Sqm

TOTAL (F)

G SANITARY FITTINGS & FIXTURES

1

Supplying and fixing of new white colour vitrious chinaware floor mounted European water closet with s/p trap

and slow lowering white seat cover of approved make (glazed earthernware water closet) and design as approved

by banks engineer / architect. The rate includes costs of all materials including non-corrossive fastners,equipments,

labour charges, rubbing, cleaning the site etc. Complete as per instructions of banks engineer / architect. (Basic

cost of e.w.c. = Rs.6560/-per no.) (Model no:

Malibu Cat. No.: 20086 , Make: Hindware)

76 No

2

Supplying and fixing wall mounted cistern with slim body installation kit with control plate white/chrome finish of

approved make and as approved by banks engineer/architect. The rate includes costs of all materials including non-

corrossive fastners,equipments, labour charges, rubbing, cleaning the site etc. Complete as per instructions of

banks engineer / architect. (Basic cost = Rs 1800/-per no.) (Model no: Dual Flush Cat. No.: 21029 , Make:

Hindware) 110 No

3

Special set for Handicapped toilet: Supplying and fixing a full set of Wash Basin size- 46cm x 36cm with one pair

mounting brackets, EWC & Cistern complete with fittings & seat cover,

one no. hinged rail 76 cm & 5 number of grab rails 60 cm size each & one no. faucet for Wash Basin. (Basic cost

per set = Rs.75,080/-) (Model

no:Matrix SAP No.: 70003, Make: Hindware, colour Star white)

9 No

4

Supplying and fixing of new white colour vitrious chinaware Indian water closet pan of approved make with s / p

trap including cutting floor, grooving, making the good the surface with pcc 1:4:8/ cm 1:4 with water proofing

compound etc. Complete. The rate includes costs of all materials including non-corrosive fastners, equipments,

labour charges, rubbing, curing cleaning the site etc. Complete as per instructions of banks engineer / architect.

(Model no: Orissa Pan (Comfort) Cat. No.: 20070 (Size (LxW): 58cm x 43 cms.) Make: Hindware (Basic cost: Rs.

1640/-per no.) 34 No

5

Supplying and fixing of new Hindware make white colour wall mounted glazed earthern wear flat back urinal bowl

of approved make with Jaquar make CP brass flush pipe with CP clamp & screws, CP spreader, waste coupling,

32mm dia CP brass bottle trap and pipe to wall CP flange including cutting and grooving the wall and making the

good walls and floor etc. Complete. The rate includes costs of all materials including non-corrosive fastners,

equipments, labour charges, rubbing, curing, cleaning the site etc. Complete as per instructions of banks engineer /

architect.

(Basic cost of urinal bowl = Rs 9470/-per no.) (Model no: Dyna Cat. No.: 60010, Make: Hindware)

68 No

6

Supplying and fixing sensor kit for urinal. The rate includes costs of all materials including non-corrossive fastners,

equipments, labour charges, cleaning etc. Complete as per instructions of banks engineer / architect.complete.

Make: Hindware ( model no :- snr-51097) .( basic cost : Rs 5100/-per no.)

68 No

7

Supplying and fixing of new glazed vitreous earthenware hand wash basin (under counter) of approximate Size

(LxW): 58 cmx 43 cm. in white colour of approved make such as parryware/euro/jaquar/hindware/cera including

supplying and fixing of jaquar make angle cock, CI bracket/anchor bolts, rubber plugs with thick CP chain, CP inlet

connections including 32mm european type CP jaquar make bottle trap with 300mm wall connection pipe

including jaquar make CP waste coupling ,cutting floors, drilling holes in the walls and making good the damaged

surface with CM1:4/PCC 1:2:4 etc. complete as per the directions of banks engineer/ the architect. The rate

includes costs of all materials including non-corrosive fastners, equipments, labour charges, curing. Cleaning etc.

Complete as per instructions of banks engineer / architect. Complet. (Wash Basin Make: Hindware, Model no :-

Garnet Cat. No.: 10080) (Size (LxW): 58cm x 43 cm.) (Basic cost of wash basin = Rs.3,150/- piece, Basic cost of

angle cock- Rs 1400/-per no. , )

127 No

8

Supplying and fixing of new 15mm dia CP angle stop cock of jaquar with CP wall flange of jaquar with 15mm PVC

connector pipes with brass nuts &bolts for cistern for wc/kitchen sink. The rate includes costs of all materials

including non-corrosive fastners, equipments, labour charges, curing. Cleaning etc. Complete as per instructions of

banks engineer / architect. Complete etc. Complete.(Basic cost of angle cock:- Rs.1400/- per no.)

144 No

9

Supplying and fixing of 15mm dia CP two way bib cock with CP wall flange of jaquar . The rate includes costs of all

materials including non-corrosive fastners, equipments, labour charges, curing. Cleaning etc. Complete as per

instructions of banks engineer / architect. Complete. (Basic cost: Rs.1900/-

per no.) 76 No

10

Supplying and fixing of 15mm dia CP Pillar cock with CP wall flange of jaquar with 15mm CP connector pipes for

ablution tap. The rate includes costs of all materials including non-corrosive fastners, equipments, labour charges,

curing. Cleaning etc. Complete as per instructions of banks engineer / architect. Complete. (Basic cost of pillar

cock: rs.5000 per no.) 136 No

11

Supplying and fixing CP stainless grating with cockroach trap for nahani trap round or square of 100 mm size over

nahani trap. The rate includes costs of all materials including non-corrosive fastners, equipments, labour charges,

curing. Cleaning etc. Complete as per instructions of banks engineer / architect. Complete. (Make: nirali/aura

big/jaquar) (Basic cost: Rs 665/- per no.) 238 No

12

Supplying and fixing new CP concealed stop cock of jaquar make (model no. 069 KN).the rate includes costs of all

materials including non-corrosive fastners, equipments, labour charges, curing. Cleaning etc. Complete as per

instructions of banks engineer / architect. Complete. (Basic Cost: - Rs.750/- per no.)

10 No

13

Supplying and fixing CP Robe hook two way in toilets (jaquar- continental, modelno: 1161N). The rate includes

costs of all materials including non-corrosive fastners, equipments, labour charges, curing. Cleaning etc. Complete

as per instructions of banks engineer / architect. Complete. (Basic cost: Rs.425 per no.)

119 No

14

Supplying and fixing 1000 ml capacity, ABS body, Kimberly Clark make manually operated soap dispenser (Model

no: 92144). The rate includes costs of all materials including non-corrosive fastners, equipments, labour charges,

curing. Cleaning etc. Complete as per instructions of banks engineer / architect. Complete. (Basic cost of soap

dispenser per no.: Rs.2867/-) 85 No

15

Supplying and fixing 350 ml -500ml capacity, heavy duty polished chrome stainless steel, Logan make counter

mounted soap dispenser. The rate includes costs of all materials including costs for core cutting of counter, charges

for fixing the dispenser on the counter through core hole, filling the gap of core with polymer grout, costs of tolls

/nececessary equipments, labour charges, curing. Cleaning etc. Complete as per instructions of banks engineer /

architect. Complete. (Approximate basic cost of soap dispenser per no. in Amazon site: Rs.1100/-)

17 No

16

Supplying and fixing CI adapters. The rate includes costs of all materials including non-corrosive fastners,

equipments, labour charges, curing. Cleaning etc. Complete as per instructions of banks engineer / architect.

Complete. Complete.

a75 mm dia

8 No

b100 mm dia.

85 No

17Supplying and fixing Jaquar make, single towel rail of 600mm length. Model No. ACN-CHR-1111NM including costs

of SS fastners etc. complete(Basic cost of towel rail - Rs 1070/- per piece) 60 No

18

Supplying and fixing jaquar make CP health faucet.( model no: ALD 573 ) with 15mm dia CP hose 1m length and cp

holding bracket of jaquar make. The rate includes costs of all materials including non-corrosive fastners,

equipments, labour charges, curing. Cleaning etc. Complete as per instructions of banks engineer / architect.

(Basic cost of health faucet per no. : - Rs. 1350/-)

85 No

19

Supplying and fixing CP toilet roll holder with flap of jaquar make (model no: 1153N). The rate includes costs of all

materials including non-corrosive fastners, equipments, labour charges, curing. Cleaning etc. Complete as per

instructions of banks engineer / architect. (Basic cost per no: Rs.900/-)

119 No

20Supplying and Providing stainless steel paper/napkin/waste bin open type. (Basic cost of SS waste bin: RS.650/-)

34 No

21Supplying and Providing stainless steel paper/napkin/waste bin with lid. (Basic cost of SS waste bin: RS.900/-)

43 No

22Supplying and fixing 1.5mm thick , Grade-304, brushed stainless steel plate Signages with following dimensions

including SS fastners etc. complete:

a)20cm x 30cm

34 No

b)20cm x 20cm

34 No

c)20cm x 15cm

77 No

23

Supplying and fixing Kimberly Clark make Multi Fold Towel Dispenser (Tissue Paper Holder) as approved by the

Banks Engineer including costs of all materials including costs of non-corrosive fastners, equipments, labour

charges, Cleaning etc. Complete.( Basic Cost of towel dispenser -Rs 2560/ No)

60 No

24

Supplying and fixing Jaquar make wall mounted CP Sink Cock with extended swinging spout with wall flange to the

sink at Water filter area in the passage including costs of all materials, labour charges etc. complete.(Model No. FLR-

5347ND) 34 No

25Supplying and providing Folded Tissue Paper suitable for inserting in Tissue paper holder ( - Approximate Basic Cost

for a bundle of 20 Packets -Rs 2000/bundle)

1 Bundle

26Supplying and providing PVC Garbage Bag of standard size (Approximate basic cost- Rs 300/packet) 5 Packet

TOTAL(G)

H EXTERNAL & INTERNAL WATER SUPPLY

1

Supplying and fixing internal and external water supply UPVC pipes with UPVC fittings/specials like tees, elbows,

bends, coupling, reducers, unions, mta, fta etc under schedule-80 series as per ASTM D-1785 standard of make

finolex/supreme/or equivalent including concealing the internal water supply pipes in the wall by making grooves

according to the size of pipes using cutting machine and placing pipes in position in grooves using ss nails and

clamps of required size and spacing and laying external pipes on the open wall with UPVC clamps at 600mm c/c

including and if necessary, threading pipes at joints with supply and fixing of necessary gi specials of aproved

"R"brand, and hemp yarn for water tight joints etc. Including hydraulic testing as per is standard including making

holes, grooving in walls, slabs etc. and making good the damages with CM1:4/PCC 1:2:4.complete. The rate

includes cost for supplying and erecting scaffolding in service ducts, costs of all materials including costs for

medium duty PVC- U solvent cement as per ASTM D-2564 standard, non-corrossive fastners, equipments, labour

charges, curing.removal of scaffolding, cleaning etc. Complete as per instructions of Banks Engineer / Architect.

a21.34 mm OD (1/2”DIA) UPVC PIPE

30 m

b26.67 mm OD(3/4” DIA) UPVC PIPE

450 m

c33.4 mm OD(1” DIA) UPVC PIPE

250 m

d42.1 mm OD(1.25” DIA) UPVC PIPE

15 m

2

Supplying and fixing brass ball valve as per is of make zoloto / Leaser or equivalent. The rate includes costs of all

materials including costs for medium duty PVC- U solvent cement as per ASTM D-2564 standard, scaffolding, non-

corrossive fastners, equipments, labour charges, curing. Cleaning etc. Complete as per instructions of banks

engineer / architect.

a15mm dia 4 No

b20mm dia 4 No

c25mm dia

4 No

d32mm dia

9 No

TOTAL (H)

IDRAINAGE

1

Supplying and fixing PVC sewage/waste water Pipes having pressure rating minimum 10 kg/sqcm of make

supreme/finolex/trubore/prince / equivalent in position of required size including floor traps/nahani traps of

equivalent size and pressure rating with specials/ fittings such as elbows, tees, bends,y's, etc.including sealing the

joints with regular PVC -U solvent cement as per ASTM-D 2564 standard including making connections with existing

waste water lines in the service duct. The rate includes cost for supplying and erecting scaffolding in service ducts,

costs of all materials including costs for cutting wall / brick bat coba and making holes/trenches and make good the

surface with CM1:4/PCC1:2:4/brick bat coba 1:4:8 with integral water proofing compound and also including costs

for PVC clamps, MS/CI brackets of required size, equipments, labour charges, curing.removal of scaffolding,

cleaning etc. Complete as per instructions of banks engineer / architect.

a40mm Dia PVC Pipe

150 m

b75mm Dia PVC Pipe

50 m

c110mm Dia PVC Pipe

70 m

d150mm Dia PVC Pipe

5 m

TOTAL (I)

SR No. PARTICULARS QTY UNIT RATE AMT

1 LIGHT / PLUG POINT WIRING

J ELECTRICAL WORKS

Supply, Installation, Testing & Commissioning of Light Point wiring using 1100 Volts grade with 3 Nos. 1.5 Sq.mm.

copper PVC insulated FRLS wire in surface/recess PVC conduits of 25 mm dia, medium class, with modular switch,

modular plate, GI Box, sockets etc.

All the wiring below false ceiling on wall must be concealed. All the drops wire from the junction box to the light

point must be in flexible pipe with gland at the junction box.

Rate quoted must include the cost of circuit wiring from DB Switchboard and switchboard to switchboard,

switches, concealed box, plate and required accessories viz. switches/sockets.

Approved Make : Legrand Myrius/ Northwest

a

Light points 663 No

b

Half Socket Point on Lighting Boards 85 No

c

Exhaust fan points 119 No

2 Power Point wiring

Supply, Installation, Testing & Commissioning of Power Point wiring using 1100 Volts grade with 3 Nos. 2.5 Sq.mm.

copper PVC insulated FRLS wire in surface/recess PVC conduits of 25 mm dia, medium class, with modular switch,

modular plate, GI Box, sockets etc.

All the wiring below false ceiling on wall must be concealed. All the drops wire from the junction box to the light

point must be in flexible pipe with gland at the junction box.

Rate quoted must include the cost of circuit wiring from DB Switchboard and switchboard to switchboard,

switches, concealed box, plate and required accessories viz. switches/sockets.

Approved Make : Legrand Myrius/ Northwest/ MK honeywell/ Anchor / Roma.

a15 A Plug Points 153 No

3 LIGHT FIXTURES

Supply, Installation, Testing & Commissioning of following light fixtures of approved make complete as per

specification with all fitting, accessories such as Junction Box, Hardware, Starter, Connector, Lamps, Tube, Driver

etc. & approved by Bank / Architect.

a10 Watt LED Downlighter (Make Philips GreenLED i600 DN191B, CRI>70, complete with integrated driver.

APPROVED MAKE – Philips/Bajaj/Osram. 306 No

b03 Watts LED recessed Spot light

APPROVED MAKE - Philips/Bajaj/Osram. 289 No

cLED Strip light 5 W per metre, IP 20. Approved APPROVED MAKE – Philips Linea /Bajaj/Osram.

374 No

dWall Recess mounting LED Step Light Luminaire

APPROVED MAKE - Philips/Bajaj/Osram. 2 No

4

Supply, installation, testing & commissioning of 225 mm (9”) sweep exhaust fan (Make Crompton Greaves, Model

Driftair or equivalent), 1300 RPM or higher, Air delivery 800 cu. mtr./hour or higher, metal body with powder

coating, complete with gravity louvres, including removal of old exhaust fan and safely handing over old exhaust

fan to Bank. Exhaust fan to be installed on existing ventilation frame, with screws/bolts/nuts and using 12 mm

marine ply if required to properly mount the exhaust fan and cover any side gaps and making electrical

connections to existing circuit through PIR detector

Approved Make : Crompton/GEC/Almonard

119 No

TOTAL(J)

K BUY BACK (LESS)

1BUYING BACK, EXISTING REMOVED OLD TEAK WOOD WOODEN DOOR /WINDOW FRAMES HAVING APPROXIMATE

SIZE 150MM X 75MM AND REMOVING THE ITEMS FROM THE SITE ETC. COMPLETE. 1010 m

2BUYING BACK, EXISTING REMOVED OLD ELECTRICAL WIRING, MIRRORS WITH FRAMES AND GI WATER PIPES

INCLUDING REMOVING THE ITEMS FROM THE SITE COMPLETE. 1 BUNDLE

3BUYING BACK, EXISTING REMOVED OLD ALUMINIUM POWDER COATED FALSE CEILING PANELS AND REMOVING

THE ITEMS FROM THE SITE COMPLETE. 985 Sqm

4BUYING BACK, EXISTING REMOVED OLD FLUSH DOOR SHUTTER HAVING THICKNESS 38MM AND REMOVING THE

ITEMS FROM THE SITE COMPLETE. 163 Sqm

5BUYING BACK, EXISTING REMOVED OLD FLUSH DOOR SHUTTER HAVING THICKNESS 50MM AND REMOVING THE

ITEMS FROM THE SITE COMPLETE. 85 Sqm

TOTAL (K)

GRAND TOTAL (A+B+C+D+E+F+G+H+I+J-K)

NOTE: 1. The contractors are advised to visit at site and understand scope works before quoting the rates

2. It is mandatory to quote for all the items of the price bid

3. The contractor shall submit “No-claim Certificate “ alongwith Final Bill

4. For payment of Service Tax, respective column in the table below is marked tick :

Sl. No Type of OrganisationColumn

for tick

AIf successful tenderer is a body corporate(Pvt. Ltd or Ltd. Firm), the requisite service tax shall be paid by

the tenderer to Govt. and contractor shall include service tax in the quoted rates.

OR

B

If successful tenderer is an individual, HUF, Partnership firm,AOP, the tenderer has to pay 50% of the

requisite service tax(i.e, 50% of the payable service tax amount) to the Government and balance 50% shall

be paid by NABARD to Govt. directly which will be deducted from your total amount of settled bill.

SEAL & SIGN OF CONTRACTOR

SEAL & SIGN OF CONTRACTOR