report - regent products corp. · (86)755-86000151 (ext 6207 16225) [email protected]...
TRANSCRIPT
BUREAU VERITAS
Bureau Veritas Shenzhen Co., ltd 4/F, Block B, Minlida lnduslrial Building, 41h Zone Of Honghualing lnduslrial Park, X iii Town, Nan shan Dislricl, Shenzhen, Guangdong, P.R. C. Tel:86·755·86000"151 fax: 86·755·86000159 www.bureauveritas.com/cps
REPORT Technical Report: (8513)329-0088
Page 1 of 36 DEC11,2013
~port is governed by, aod incorpora les hy re ference, tho Conrhtions or Testing as posted at the date or issuance of this rti!porl nt hflp:l/www.cps.bureauverilas com and is intended for your exclusive use. Any copying or replicabon of this report to or for any other pP.rson or enh!y, or usA or our name or lti=ldt=!nl.ark, is permillecJ only \'1tlh Ot tr prior v:ritleo pennission. This report sets forth our findtngs solely ~·.ith respect to the lest sampl~s identified herein. The results set forth in this report me not indtcv tive or represental.i'.'C of the quality or characteristics of the Jo t from which ~ test sample was II'! ken or any simll<tr or identkal p roduct unless specifically antJ expressly noled. Our report mc!udes all of the l&sls requested by you and the results l! tereor based upnn the infornlt'llion th;~t you provldctl to us. You have 60 days from data of issuance of lhts report to nuhfy us of any mall!:tiol c«ot or omission cau~ed by our negligence; provided, howavt:!r,lhal such notn::e shall be In \vril ing l'lnd sha!l specificAlly address the issue you wish to mise. A fa ilure to raise such i:;sue willlln the prescribed time shall constitute you unqualified acceptance of the comp!etenec:s or this rerofl, the testg conducted and the correc.tnes-; of the re1Jor1 con tents.
BUREAU VERITAS
MONDAY BEAUTY LTD 2810, 28/F PAULY CENTRE, 51 HUNG TO ROAD, KWUN TONG, HONG KONG ATTN: SUNNY YU I EAGLE I NELSON I
CANDY/STEPHEN/GARY C. C.: EMAIL: [email protected] I
[email protected] I [email protected] I [email protected] I [email protected] I [email protected]
SUBMISSION PROCESS
Sample Collection:
D Initial Sample Collection (OC's 115/6 Only)
D Second Sample Collection (DC's 2{3/4/6!7/BI9/10/411/412)
D Single Sample Collection . (All DC's- 50% of Entire Quantity Produced)
0 Random Sampling of Failure {All DC's- 90% of Entire Quantity Produced)
D Random Sampling of Failure w/ Prop 65 (DC 4/9 & Non-DC 4/9-90% of Entire Quantity Produced)
D Vendor Direct
TEST REPORT
LAB LOCATION: LAB NUMBER: CLIENT NO.: DEPARTMENT:
DATE IN: DATE OUT: MOD. LOGIN: REVISED DATE:
PAGE:
PASS
SHENZHEN (8513)329-0088 I I
NOV 26,2013 DEC 11,2013 NOV 29, 2013 I
2 of 36 OVERALL RATING
SATISFACTORY
CORRECTIVE ACTION REQUIRED
FAIL
FAIL-ACCEPT
US CN
X X
RANDOM SAMPLING REQUIRED "VENDOR PLEASE NOTE RANDOM SAMPLING
IS REQUIRED ON ALL FAILED REPORTS**
HD
TESTING FOR TOXICS IN PACKAGING CLEARINGHOUSE (V2)
XXX - 09062.3 - NA METAL METAL ALLOY FOOD CONTACT ARTICLE (V14)
CPSD - 06001.05 - US FOOD CONTACT ARTICLE (V5)
CPSD • 06001 - US FOOD CONTACT ARTICLE (V11)
XXX - 06001 - NA NON-REGULATORY ANALYTICAL TESTING (V7)
XXX- 08443 - NA FOODWARE- KITCHEN TOOLS, UTENSILS & GADGETS (V17)
XXX - 06052 • NA CALIFORNIA PROPOSITION 65 (V49)
XXX-06572-US
!IUHEAU VERITAS
Sample Description: SPLATTER SCREEN 2 ASTD Dollar Tree Direct (DTD) Sample Description: 1/ Final Packaging: Yes (submitted for review) I X I No (not submitted for review) I I Submitter: MONDAY BEAUTY
LTD Country of Ori!'lin: CHINA Country of Sale: USA/CANADA DTD Country of Sale: Color:
Department Number: I Sub-Department No. I
Previous Report No.: I Revised Report: Yes: I I No: I X Charge Vendor: Yes: I X I No: I Test Type: Reason For Revision: I
Vendor Number: I
Style: E3 Order:
DTSC SKU Number(s): P.O. Number(s) (USA):
Additional PO No (USA):
119125 3246348/ 3246350/ 3246352(USA)
P.O. Number(s) (Canada): 3246324/3246326/ 3246328(CAN)
Additional PO No (Canada): I DTD SKU: I
DTD PO No.: I Vendor Item Number: I
(8513)329-0088 Page 3 of 36
TEST PROPERTY PASS SATISFACTORY CAR FAIL DATA COMMENTS
Labeling X Physical Characteristics X Construction Qualities X Performance X Colorfastness I Flammability X Analytical X
HD
BUREAU AlJI:INIIl·M
REMARK(S):
1. See enclosed protocol(s) for the test results.
2. In this report, full test was performed on all styles.
3. The following test result was upon document review of previous report(5213)275-0564 • Heavy metals content in packaging materials
4. As per request, the following test was not tested in this report • GRAS evaluation
If there are questions regarding above report, please contact the appropriate lab personnel.
Technical questions, please contact: John Hong I Randy Huang (86)755-86000151 (Ext 6207 16225) [email protected] [email protected]
Administrative questions, please contact: Ann An I Shirley Liu (+86)755-86000151 (Ext 6210 16446) [email protected] [email protected]
BUREAU VERITAS SHENZHEN CO., LTD
BRIAN TAM MANAGER- HARDLINES DIVISION
HD
(8513)329-0088 Page 4 of 36
*
*
BUREAU VERITAS
Heavy metals content in packaging materials- documentation review
Heavy metals content in packaging materials
HD
Model taxies in packaging legislation of the taxies in packaging clearinghouse (TPCH)
Model taxies in packaging legislation of the Taxies in Packaging Clearinghouse (TPCH) I
CPSD-AN-00065-MTHD
BV Lab Number: (8513)329-0088
Technician Name: BRAN
Test Date: DEC 09-11,2013
Reviewed By/Date: ALICE I DEC I 1,2013
Page 5 of36
XXXX TEST PROTOCOL FOR
Varies
XXX- 09062.3- NA
stun of concentration of lead, cadmium, mercury and hexavalent chromium in packaging or packaging components shall not exceed 100 mg!kg (100 ppm) by weight.
Note: 1. Total chromium (Cr) is determined ftrst. Confirmation of hexavalent chromium (Cr VI) will be performed when concentration of total chromium is above the detection limit and sum of concentration of four heavy metals is exceeded the limit. 2. Max. composite up to 3 like materials. 3. Composite across styles is acceptable.
Client
M DOCUMENT PROVIDED
SEE REMARK
NA
PASS
B'UREAU VER ITAS
Key:
* ** #
Result Key: c R M NM NA NT
Rating Kev: PASS FAIL MARG
CAR
HD
Additional Charge For This Test Mandatory Requirement By Request Only
Claimed Recorded Meets Does Not Meet Not Applicable Not Tested
Pass Fail Marginal Corrective Action Required
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
Client Approval:
Creation Date: Last Revision Date: Pricing Review Date: Technical Review Date:
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE/DEC 11.2013
Page 6 of36
OCTOBER 16,2012/ Debbie Smith OCTOBER 20, 2008 OCTOBER 12,2012 JANUARY 20,2001
BUREAU VERITAS
# California Proposition 65
HD
CPSD-AN-PTCL-06572-US
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
BUREAU VERITAS TEST PROTOCOL FOR
CPSD- 0600L05- US
The sample should be California Proposition 65 to detennine · testing or labeling is required.
For samples that fall under the scope ofCAProp 65 requirements with testing limit(s) but does not contain appropriate labeling (refer to labeling section for detail), actual testing will be conducted. Othenvise, actual testing is not required and report as "Pass" if the ·
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 7 of36
SEE XXX-06572-US
*
*
*
BUREAU VERITAS
Extractable lead and cadmium in silver plated hollowware
Lead content in pewter alloys
Lead content in solder and flux
HD
FDA CPG 7117.05 and 7117.06 I AOAC
973.32 (2007) I CPSDAN-00012-MTHD
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
CPSD- 06001.05- US
Cadmium (Cd): 0.25 ppm (mg!L) (Any one of 6 units for Large hollowware) 0.5 ppm (mg/L) (Any one of 6 units for Small hollowware/Cups/Mugs) 0.5 ppm (mg!L) (Average of6 units for Flatware)
Lead (Pb): 7.0 ppm (mg/L) (Average of6 units for article intended for use by adult) 0.5 ppm (mg!L) (Any one of 6 units for article intended for use by infants and children)
Note: -Test only food contact surfaces intended to hold liquid. No test is required for spoon and fork. - Cadmium ( Cd) limit in pitchers refer to the limit of small or large hollowware. -Cadmium (Cd) limits are with reference to CPG 7117.06.
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 8 of36
NA
NA
NA
BUREAU V E R ITAS
* GRAS evaluation
* Extractable lead and cadmium in tableware
Note 1: According to FDA 2009 Food Code,
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
CPSD- 06001.05- US METAL METAL ALLOY FOOD CONTACT ARTICLE
California health and safety code section
108860 I AOAC 973.32 (2007) I ASTM C738-94 (R20 11) I CPSDAN-00011-MTHD
Cadmium (Cd): 0.25 ppm (mg!L) (Any one of6 units for Large hollowware) 0.5 ppm (mg!L) (Any one of 6 units for Small hollowware/Cups/Mugs) 0.5 ppm (mg!L) (Average of6 units for Flatware)
Lead (Pb): 1.0 ppm (mg!L) (Any one of 6 units for Large hollo\VWare) 2.0 ppm (mg!L) (Any one of6 units for Small hollo\VWare) 0.5 ppm (mg!L) (Any one of6 units for Cups!Mugs!Pitchers) 3.0 ppm (mg/L) (Average of 6 units for Flatware)
Note: -Test only food contact surfaces intended to hold liquid. -Cadmium (Cd) limit in pitchers refer to the limit of small or
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE/DEC 11,2013
Page 9 of36
NT SEE REMARK
NA
a. 4-101.12, Cast Iron may not be used for utensils or food contact surfaces of equipment except it may be used as a surface for cooking or used in utensils for serving food if the utensils are used only as part of an uninterrupted process from cooking through service. b. 4-l 0 1.14, Copper and copper alloys such as brass may not be used in contact with food that has a pH below 6 such as vinegar, fruit juice, or wine or for a fitting or tubing installed between a backflow prevention device and a carbonator. It may be used in contact with beer brewing ingredients that have a pH below 6 in the prefermentation and fermentation steps of a beer brewing operation such as a brewpub or micro brewery. c. 4-101.15, Galvanized metal may not be used for utensils or food contact surfaces of equipment that are used in contact Vlith acidic food. d. 4-101.18, Nonstick coating, kitchenware such as frying pans, griddles, sauce pans, cookie sheets and waffle bakers that have a perfluorocarbon resin coating shall be used with nonscoring or nonscratching utensils and cleaning aids.
HD
I>UREAU VERITAS
Kev: -*-" #
Result Key: c R M NM NA NT
Rating Key; PASS FAIL
HD
Additional Charge For This Test Mandatory Requirement By Request Only
Claimed Recorded Meets Does Not Meet Not Applicable Not Tested
Pass Fail
Additional 2 pes for GRAS evaluation. Additional 6 pes for extractable lead and cadmium in silver plated hollowware/tableware. Additional sample may be requested if insufficient.
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
Client Approval: Creation Date: Last Revision Date: Pricing Review Date:
Technical Review Date:
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 10 of36
FEBRUARY 12,2010 JULy 04, 2013 AUGUST 03,2010
BV Lab Number:
Technician Name:
Test Date:
8UREAU Reviewed By/Date:
VERITAS
BUREAU VERITAS TEST PROTOCOL FOR
*
*
*
*
*
tests for articles intended to contact with food and
Plastic
Paper and paperboard
Ceramic, porcelain, glass and enamel
Wood
Metal and metal alloy
GRAS in natural material (non-wood)document review
21 CFR 170-189 FDA Generally Recognized
as Safe (GRAS) Guidelines I FDA
Opinion I CPSD-AN-G00007-STIP02/ CPSD-GB-0000 1-
STIP03
Note 1: CPSD-AN-PTCL-06001.04-US will be offered to program client only.
HD
CPSD- 06001 -US
in CPSD-AN-PTCL-
except (non-wood) intended to come into contact with food shall meet FDA GRAS requirement. All additives in that material, such as glue shall also meet FDA GRAS requirement. Client shall provide the documentation with material bill or composition for material identification. It is acceptable for the client to submit either a FDA letter or, if there is infonnation from FDA
is acceptable. a guarantee letter material is the only food grade material used in
can also be
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 11 of36
NA
NA
NA
NA
PASS
NA
BUREAU VERITAS
~ * ** #
Result Key: c R M NM NA NT
Rating Key: PASS FAlL
HD
Additional Charge For This Test Mandatory Requirement By Request Only
Claimed Recorded Meets Does Not Meet Not Applicable Not Tested
Pass Fail
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
Client Approval: Creation Date: Last Revision Date: Pricing Review Date: Technical Review Date:
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 12 of36
I JANUARY 29, 2009 JANUARY 09,2013
BUREAU VERITAS
* Leachable lead in kettles
* Extractable lead and cadmium - interior
HD
CPSD-AN-PTCL-06001-US
Hazardous Products (Kettles) Regulations J
CPSD-AN-00493-
Glazed Ceramics and Glassware Regulations (SOR/98-176) I CPSD-
AN-00011-MTHD
6
BV Lab Number:
Teclmician Name:
Test Date:
Reviewed By/Date:
XXXX TEST PROTOCOL FOR
Food contact article, which is completely or partly made of ceramic, porcelain or glass and completely or partly covered with coating, glaze or decoration, shall not contain extractable lead (Pb) and cadmium (Cd) exceed the following limits:
Cadmium (Cd): 0.25 ppm (mg!L) (any one of 6 units for Large hollo\V\Vare and Pitchers) 0.5 ppm (mg/L) (any one of 6 units for Small hollowware, Cups and Mugs) 0.5 ppm (mg!L) (any one of6 units for Flatware)
Lead (Pb): 1.0 ppm (mg!L) (any one of6 units for Large hollowware) 2.0 ppm (mg!L) (any one of 6 units for Small hollowware) 0.5 ppm (mg!L) (any one of 6 units for Cups, Mugs and Pitchers)
(8513)329-0088
BRAN DEC 09-11,2013
ALICE/DEC 11,2013
Page 13 of36
M SEE CPSD-0600 I-US
PASS
NA
NA
BUREAU VERITAS
* ~xtractable lead and cadmium in lip and nm
HD
Glazed Ceramics and Glassware Regulations (SOR!98-J 76) I CPSD-
AN-00011-MTHD
6
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
XXX- 06001- NA
External decorated lip and rim area of beverage products shall not contain extractable lead (Pb) and cadmium (Cd) exceed the following limits in any of the 6 units:
Cadmium (Cd): 0.4 ppm (mg!L) Lead (Pb): 4.0 ppm (mg!L)
Note: For drinking vessel with decoration on lip and rim area from the
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 14 of36
NA
BUREAU VERITAS
* Bisphenol A content
HD
Various US state laws (e.g. CT Public Act#
09-103 andMN Chapter 40 SF #247) I Canada
Consumer Product Safety Act
(S.C.2010,c.21), Schedule 2, item 15 I
CPSD-k'I-00169-MTHD
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
XXX - 06001 - NA
~:~;~;:::g:::~~~~s1 norconram any det<octab1e o: (BPA) (BV reporting limit is lmg/kg): a. Infant formula/ baby food plastic container,jar or can b. All reusable food or beverage containers including their lids (if any), c. Baby products other than (a) and (b), d. Straws
"Infant formula" means a commercially available milk based or soy based powder, concentrated liquid or ready-to-feed substitute for human breast milk that is intended for infant consumption. "Baby food" means a commercially available prepared solid food consisting of a soft paste or an easily chewed food that is intended for consumption by children two years of age or younger. "Baby product" means products, including but not limited to pacifiers, bibs, toys, changing pad ... etc, intended to use by children three years of age or younger. "Reusable food or beverage container" means a receptacle for storing food or beverages, including, but not limited to, baby bottles, spill~proof cup, sports bottles and thermoses, and excluding containers intended for disposal after initial use.
Report actual results or include data table within report. Note: ~ Actual testing will be conducted on:
(i) all accessible plastic materials in the product, (ii) food contact plastic parts in the product.
-Vendors shall be responsible for the compliance of all other materials. -It is not applicable on polycarbonate resins in infant feeding bottles (baby bottles) and spill~proof cups including their closures and lids, designed to help train babies and toddlers to drink from cups (sippy cups), as it is banned per 21 CFR
. 580.
(8513)329-0088
BRAN DEC 09-11,2013
ALICE I DEC 11,2013
Page 15 of36
NA
BUREAU VERITAS
' Total lead content in surface coatings
HD
Canada Consumer Products Containing Lead (Contact with Mouth) Regulations (SOR/2010-273) I CPSD-AN-00461-
MTHD
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
XXX- 06001 - NA
Products for all ages (including adults) that have accessible surface coatings that come into contact with the user's mo~tth during normal use shall not contain lead or lead components in which the lead content is in excess of0.009% (90ppm) of the weight of the total content.
Report actual results or include data table within report.
Component testing is allowed. Compositing is not allowed.
Note: The following products are excluded: - Kitchen utensils -Jewelry under Children's Jewelry Regulations -Products subject to Glazed Ceramic and Glassware
(8513)329-0088
BRAN DEC 09-11,2013
ALICE I DEC 11,2013
Page 16 of36
NA
BUREAU VERITAS
* Total lead content in substrate materials
HD
Canada Consumer Products Containing Lead (Contact with Mouth) Regulations (SOR/2010-273) I CPSD-AN-00461-
MTHD
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
XXX- 06001- NA
Products for all ages (including adults) that have accessible substrates that come into contact with the user's mouth during normal use shall not contain lead or lead components in which the lead content is in excess of0.009% (90ppm) of the weight of the total content.
Report actual results or include data table within report.
Component testing is allowed. Compositing is not allowed.
Note: The following products are exclude: - Kitchen utensils, - Jewelry under Chlldren' s Jewelry Regulations -Products subject to Glazed Ceramic and Glassware Regulations. - The following materials will be exempted from testing. It is the vendors responsibility to ensure compliance to the applicable requirements: Non-suspect materials as defined by the Consumer Products Safety Commission in 16 CFR 1500.91 (d) and (c) (refer to exemption list of lead in substrate in the CPSD-GB-PTCL-08444-US protocol for detail)
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 17 of36
NA
BUREAU VERITAS
Key:
* ** #
Result Key: c R M NM NA NT
Rating Key: PASS FAIL MARG
CAR
HD
Additional Charge For This Test Mandatory Requirement By Request Only
Claimed Recorded Meets Does Not Meet Not Applicable Not Tested
Pass Fail Marginal Corrective Action Required
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
Client Approval:
CPSD-AN-Creation Date: Last Revision Date: Pricing Review Date: Technical Review Date:
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE/DEC 11,2013
Page 18 of36
AUGUST 05,2013/ Debbie Smith JANUARY 04,2011 OCTOBER 03,2013
BUREAU VERITAS
' Total lead content in surface coatings
' Total lead content in surface coatings
AOAC 974.02 modified I CPSD-AN-00001-
MTHD
CPSD-AN-00009-MTHD
BV Lab Number: (8513)329-0088
Technician Name: BRAN Test Date: DEC 09-11,2013
Reviewed By/Date: ALICE /DEC 11,2013
XXXX TEST PROTOCOL FOR
XXX - 08443 - NA
on items outside of the scope CPR 1303 shall not contain lead or lead components in which the lead content is in excess of 0.060% (600ppm) of the \Veight of the total content.
Report actual results or include data table within report.
Component testing is allowed. Compositing up to 4 like materials is allowed. The composite result will be evaluated against the adjusted limit (regulatory limit divided by the number of composites).
item outside of the scope not contain lead or lead components in which the lead content is in excess of 0.06% (600ppm) of the weight of the total content.
Report actual results or include data table within report.
Component testing is allowed. Compositing up to 4 like materials is allowed.
Client
Page 19 of36
NA NO SURFACE COATING
NA NO SURFACE COATING
IMPORT ANT NOTE: The infonnation presented under the "Criteria" of this protocol is for information only and does not replace the content of the standard. Details of the requirements should be referred to the original standards.
HD
BUREAU VERITAS
Key:
' '* #
Result Kcv: c R M NM NA NT
Rating Key: PASS FAIL MARG
CAR
HD
Additional Charge For This Test Mandatory Requirement By Request Only
Claimed Recorded Meets Does Not Meet Not Applicable Not Tested
Pass Fail Marginal Corrective Action Required
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
Client Approval:
Creation Date: Last Revision Date: Pricing Review Date: Technical Review Date:
(8513 )329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 20 of36
OCTOBER 16,2012/ Debbie Smith FEBRUARY II, 2011 OCTOBER 12,2012
BUREAU V E R ITAS
* California Proposition 65
HD
BV Lab Number: (8513 )329-0088
Technician Name: BRAN Test Date: DEC 09-11,2013
Reviewed Byillate: ALICE I DEC 11,2013
Page 21 of36
XXXX TEST PROTOCOL FOR
cream
pee required if testing to 1 or more supplemental protocol is necessary. Please refer to the above referenced supplemental protocol(s) for additional
XXX-HL-PTCL-06572-US
SEE XXX-06572-US
BUREAU VERITAS
* Food contact articles
HD
XXX-HL-PTCL-06001-NA
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
conform to the applicable requirements of the Food, Drug, and Cosmetic Act (FDCA), specifically 21 CPR 170 through 189. Special requirements for Plastics: ~In lieu of testing, test report can be submitted if dated within six months. For food contact items containing PVC, PETG, Styrene Block Polymers, Polyester Elastomers or ABS (Acrylonitrile> 30%), it is acceptable for the vendor to submit a test report (dated within six months) indicating that only food grade materials were used in the manufacturing process.
Special requirements for Metal: - All metal components of cups, mugs or other food contact articles shall be constructed of an FDA recognized grade of stainless steel. Stainless Steel Grades: 302, 304, 304F, 316,321,410,416, 420 (cutlery only), 440, 440A, 440C, 904L, A-36 and CF-1018. -For any other grade of stainless steel or other metal, vendor need to provide the list of compositions or will have the material evaluated which shall be submitted to the FDA for review and approval for use in food contact articles. 01 end or shall be responsible for the accuracy of information provided) In lieu of testing, test report can be submitted if dated within six months. Special requirements for ceramic, porcelain, glass or enamel: - As a Dollar Tree Requirement, for California health and safety code section 108870- All tableware items, regardless of extractable Lead & Cadmium test result, distributed in the State of California must be permanently and indelibly marked with the name, or if the item is too small, a registered trademark, of the manufacturer or
(8513 )329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11.2013
Page 22 of36
SEE XXX-0600!-NA
BV Lab Number: (8513)329-0088
Technician Name: BRAN Test Date: DEC 09-11,2013
Reviewed By/Date: ALICE I DEC 11,2013 BUREAU
Page 23 of36 VERJTAS
* SEE XXX-09062.3-NA
F.P. and L. Act (16 CFR or distributor's name & address (City,
** 500) OR NIST Uniform
PROVIDED DATA Laws and Regulations
Handbook 130
F.P. and L. Act (16 CFR
** 500) OR NIST Uniform
PROVIDED DATA Laws and Regulations
Handbook 130
F.P. and L. Act (16 CFR
" 500) OR NIST Uniform
PROVIDED DATA Laws and Regulations
Handbook 130
** Country of origin 19 CFR 134 M PASS
MADE IN CHINA
Use Labeling M PASS
HD
**
**
**
BUREAU VERITAS
Labeling - packaging - packaging copy or artwork request form may be substituted
Labeling - packaging - packaging copy or artwork request form may be substituted
Labeling - packaging - packaging copy or artwork request form may be substituted
HD
Consumer packaging and labeling regulations,
C.R.C., c. 417
Consumer packaging and labeling regulations,
C.R.C., c. 417
Consumer packaging and labeling regulations,
C.R.C., c. 417
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
XXX- 06052- NA
M'mufacturer or distributor's name & address (city & zip). Minimum 1.6 mm type size Placed anywhere on outer surface of package except bottom - English or French Where the area of the principal display surface of a container is 1.55 square inches (10 square centimetres) or less, the information may be in letters of not less than 1/32 inch (0.8
Product net quantity PDP, English and French using valid metric word (or, valid metric symbol is deemed bilingual) Numerical portion of net quantity declaration must be in bold face type, type size based on PDP All other information must be clear and legible.
PnJdttctide,ntificati<>ll English and French, PDP in 1.6 mm minimum type size.
Typeface not stipulated must be legible to the consumer. In certain cases where the container has a principal display surface of 10 cm2 (1.55 inz) or less, the minimum type height may be reduced to 0.8 mm (1132 in.). Refer to section 16 of the regulation.An exemption from declaring product identity may apply under the following conditions: 1) product is sold by count and is packaged in a way that it is visible and identifiable.
The label has an accurate pictorial representation
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 24 of36
M PASS
M PASS
M PASS
**
**
BUREAU VERITAS
Labeling - packaging - packaging copy or artwork request form may be substituted
Labeling - packaging
HD
Consumer packaging and labeling regulations,
C.R.C., c. 417
Consumer packaging and labeling regulations, C.R.C., c. 417 section 6
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
-The name and address of a Canadian dealer preceded by the words "imported by" (importC par") or "imported for" ("import6 pour"); or -The statement of geographic origin located immediately adiacentto the name and address of a Canadian dealer; or
mandatory labeling information shall be shown in both French and English languages. The type of mandatory labeling that is required includes, but is not limited to, mandatory warning, product identity, net content and ingredient declarations. The names and address of the manufacturer and country of origin labeling requirements may be presented in either French or English. Other supplemental label information that is considered to be nonmandatory (e.g. directions for use) also does not have to appear in a bilingual manner. However, manufacturers are encouraged to include such information in a bilingual format if plausible.
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE/DEC 11,2013
Page 25 of36
M PASS
M PASS
BUREAU VERITAS
** Country of origin marking
* Total lead content in surface coatings
HD
Canada Customs Tariff, Marking of Imported Goods Regulations,
SOR-94-10 I Marking of Imported Goods
MemorandumDll-3-1
Consumer Products Containing Lead
(Contact with Mouth) Regulations I CPSDAN-00461-MTHD
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
XXX- 06052- NA
Imported goods shall indicate country of origin. Must be legible and sufficiently permanent to
remain on the goods until it reaches the purchaser. c) For goods from NAFTA countries, the language may be English, French or Spanish. d) For goods from non-NAFTA countries, language may be English or French and marking should appear on individual articles. e) If the packaging conceals the CoWl try of Origin mark, then the packaging must also be marked. f) There is a provision to mark only the container if the goods are imported from NAFTA countries, providing that certain conditions are met, such that the ultimate
will see the marked container.
Products for all ages (including adults) that have accessible surface coatings that come into contact with the user's mouth during normal use shall not contain lead or lead components in which the lead content is in excess of0.009% (90ppm) of the weight of the total content.
Report actual results or include data table -within report.
Client requirement: Component testing is allowed. Compositing is not allowed.
Note: The following products are excluded: -Kitchen utensils - Jewehy under Children's Jewell)' Regulations -Products subject to Glazed Ceramic and Glassware
(8513 )329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11.2013
Page 26 of36
M MADE IN CHINA
PASS
NA
BUREAU VERITAS
* Total lead content in substrate materials
* Total lead content in surface coatings
HD
Consumer Products Containing Lead
(Contact with Mouth) Regulations I CPSDAN-00461-MTHD
AOAC 974.02 modified I CPSD-AN-00001-
MTHD
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
for all ages (including adults) that have accessible substrates that come into contact with the user's mouth during normal use shall not contain lead or lead components in which the lead content is in excess of0.009% (90ppm) of the weight of the total content.
Report actual results or include data table within report.
Client requirement: Component testing is allowed. Compositing is not allowed.
Note: The following products are exclude: - Kitchen utensils, -Jewelry under Children's Jewelry Regulations -Products subject to Glazed Ceramic and Glassware Regulations. -The following materials will be exempted from testing. It is the vendors responsibility to ensure compliance to the applicable requirements: Non-suspect materials as defined by the Consumer Products Safety Commission in 16 CFR 1500.91 (d) and (e) (refer to exemption list of lead in subs_trate in the CPSD-GB-PTCL-08444-US protocol for
items outside of the scope lead or lead components in which the lead content is in excess of0.003% (30ppm) of the weight of the total content.
(8513 )329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 27 of36
NA
NA Report actual results or include data table \Vithin report. NO SURFACE COATING
Component testing is allowed. Compositing is not allowed
Client
BUREAU VERITAS
* Total lead content in substrate materials
* Radiation screening test
Sharp points I edges
Exposed edges ~ metals
HD
EPA 3050B modified I EPA 3051A modified I EPA 3052 modified/
CPSD-AN-00007-MTHD I CPSD-AN-
00008-MTHD I CPSD-AN-00164-MTHD
Gamma emission scans
16 CFR 1500.481 1500.49 modified
SOR/20llwl7 section 8 modified
All
All
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
outside of the scope of CPSIA shall not contain lead in excess o£0.003% (30ppm) of the weight of the total content.
Report actual results or include data table within report.
Component testing is allowed. Compositing is not allowed
Note: Non-suspect materials as defined by the Consumer Products Safety Commission in 16 CFR 1500.91 (d) and (e) (refer to exemption list of lead in substrate in the CPSD-GBPTCL-08444-US protocol for detail).
parts not exceed 2 times over background radiation
Note: Applicable to all products except food
no sharp points I edges, other than those required
Shall not reveal hazards associated with exposed metal edges. All edges shall be folded back or sprayed with or dipped in paint or otherwise treated in order to eliminate all sharpness and burrs.
Modification =
(8513)329-0088
BRAN DEC 09-11,2013
ALICE I DEC 11,2013
Page 28 of36
M SEE TABLE 1
M ND
M
M
PASS
PASS
PASS
PASS
l,..uv~~
"' ~ " .. Q ~
' '
1.a:zs
BUREAU VERITAS
Exposed edges -plastics
Wooden surfaces. edges and comers
Exposed edges and comers on glass
Exposed ends on wire frame or structure
Flammability Of Solids
HD
SOR/2011-17 section 10 modified
SOR/20 11-17 section 11 modified
SOR/20 11-17 section 12 modified
SOR/20 11-17 section 9 modified
16 CFR 1500A4
All
All
All
All
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
Shall not reveal hazards from exposed sharp ends on wire frames or structures, prior to or following reasonably foreseeable use. All wire ends shall be covered, turned in or turned back.
<0.1 in
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11,2013
Page 29 of36
NA
NA
NA
NA
M PASS
l,.u ""~
" ~ " , Q ~
1'.82&
BUREAU VERITAS
Capacity ~ volumetric
Seal of attachment or rivets
Actual use- functionality- not covered by other tests
Dishwasher exposure
Operates as Intended
Operates safely
Knives and spatula - bending strength
HD
CPSD-HL-06000-MTHD I Capacity
CPSD-HL-01058-MTHD I Actual usc
CPSD-HL-01014-MTHD I Dishwasher
CPSD-HL-01058-MTHD I Actual use
CPSD-HL-04014-MTHD I Bending force
BV Lab Number: (8513)329-0088
Technician Name: BRAN
Test Date: DEC 09-11,2013
Reviewed By/Date: ALICE I DEC 11,2013
Page 30 of36
NA
All M PASS
All
All and I or
M PASS
of 3 M PASS
NA
M PASS
M PASS
not or any loss of servicability after the application of the load. Record
NA the total amount of deformation.
BV Lab Number: (8513)329-0088
Technician Name: BRAN
Test Date: DEC 09-11,2013
Reviewed By/Date: BUREAU VERITAS
ALICE I DEC 11,2013
Page31 of36
XXX- 06052- NA
Effects of heat M PASS
Effects of extreme temperature change M PASS
Moisture content NA verification
TABLE I
Color I Component Location Style (mg!kg)
I BLACK PLASTIC HANDLE A <10
2 DULL BLACK PLASTIC HANDLE B <10
3 SILVERY METAL METAL PARTS A,B 15
4 DARKSILVERYMETAL HANDLE A <10
HD
BUREAU VERITAS
Key: * ** #
Result Key: c R M NM NA NT
Rating Kev: PASS FAIL MARG
CAR
Ima2:e Appendix G-0104 Trademark of the manufacturer or importer.bmp
HD
Additional Charge For This Test Mandatory Requirement By Request Only
Claimed Recorded Meets Does Not Meet Not Applicable Not Tested
Pass Fail Marginal Corrective Action Required
,;.-~O.f?.9.
8.~.·~ rx: . ~ '('· ~:..-·
'.f;t...... .,»' ~J,IZ:.,t;~ .. ..,.,c·
¥'-"""""'"'" ~ • .
lrii"N.G!SlO~SI:CQJ
'""''"" .·. ·#' .~-oo~"
BV Lab Number: (8513)329-0088
Technician Name: BRAN
Test Date: DEC 09-11,2013
Reviewed By/Date: ALICE I DEC 11,2013
Page 32 of36
BUREAU VERITAS
T-0005 Principal Display Panel.jpg
HD
P:rodl;lct N'(Ot Quanti~
Deciara!lotrmUs!JJelnE~gl~hil;ndFrench;·me!Jjc.oriils;onPDgbbld, · ~~peosiz~baserl onPOPsize · ·
., >645mrfbut <25.8di'ti' (41)0 IIJ?')
>252Sctm2 (400 ln?)
MifllmwnTvpe
2;2 mm (1 f8Jn.)
6:4 mm (1141riS
9::5rnm (3181!:0._
t2::irnm fii2In 1
BV Lab Number: (8513)329-0088
Technician Name: BRAN Test Date: DEC 09-11,2013
Reviewed By/Date: ALICE I DEC 11,2013
Page 33 of36
Client Approval: JULY 20, 2013/ Debbie Smith
Creation Date: OCTOBER 22, 2009 Last Revision Date: JULY 22, 2013 Pricing Review Date: MAY 08, 2013 Technical Review Date: !\..iA Y 08, 2013
BUREAU VERITAS
HD
hand tools, garden tools and kitchen utensils with grips
XXXX TEST PROTOCOL FOR XXX-06572-US
Applicable section from All samples shall be reviewed against the requirements of California
protocol CPS D-AN- Proposition 65 to determine if additional testing or labeling is required.
Santa Clara Superior Court 112CV231165/
EPA 3051A modified I CPSD-AN-00108-
MTHD
[Hand Tools, garden tools, and kitchen utensils with Grips]
Product grips of hand tools, garden tools, and kitchen utensils shall not
exceed 100 ppm (0.01 %) total lead content.
Labeling is not allowed by the consent judgment
Note:
- Composite up to 3 like materials except metal. If the composite result
exceeds the adjusted limit (regulatory limit divided by the number of
components), individual materials will be analyzed.
~ Applicable to all accessible metal, plastic and synthetic leather substrates
in the grips of single, multiple, sets or kits of hand tools, garden tools and
kitchen utensils.
-Hand tools includes wrenches, screwdrivers, pliers, hammers, saws, tape
measures, and related kits and bags as well as air blow guns, ratchet tie
downs, hand-held work-lights, flashlights, knife sharpeners, lint rollers,
bowl brushes, utility brushes, pet grooming brushes, plungers, and drain
cleaners.
-Kitchen utensils do not include cutlery such as knives, forks, spoons, or
other utensils for serving at a table.
-Vendor is responsible for compliance of all other materials.
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
(8513)329-0088
DEC 09-11,2013
ALICE I DEC 11,2013
Page 34 of36
NAI-
M/PASS
SEE TABLE I
BUREAU VERIT!l.S
3. Phthalate content in hand tools, garden tools and kitchen utensils with grips
HD
Santa Clara Superior
Court 112CV231165 I Solvent extraction, GC
MSILC-MS analysis I CPSD-AN-00108-
MTHD
XXX-06572-US
[Hand Tools, garden tools, and kitchen utensils with Grips]
Product grips of hand tools, garden tools, and kitchen utensils shall not
contain more than 0.1% (lOOOppm) of each ofDEHP, BBP, and DBP.
Labeling is not allowed by the consent judgment
Note: - Composite up to 3 like materials. If the composite result exceeds the
adjusted limit (regulatory limit divided by the number of components),
individual materials will be analyzed.
-Applicable to all accessible plastic and synthetic leather substrates in the
grips of single, multiple, sets or kits of hand tools, garden tools and kitchen
utensils.
~Hand tools includes wrenches, screwdrivers, pliers, hammers, saws, tape measures, and related kits and bags as well as air blow guns, ratchet tie
do'\¥11s, hand~ held work~lights, flashlights, knife sharpeners, lint rollers,
bowl brushes, utility brushes, pet grooming brushes, plungers, and drain
cleaners.
-Kitchen utensils do not include cutlery such as knives, forks, spoons, or
other utensils for serving at a table.
- Vendor is responsible for compliance of all other materials.
BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
(8513)329-0088
BRAN
DEC 09-11,2013
ALICE I DEC 11.2013
Page 35 of36
M/PASS
SEE TABLE2
BV Lab Number: (8513)329-0088
Technician Name: BRAN
Test Date: DEC 09-11,2013
BUREAU Reviewed By/Date: ALICE I DEC 11,2013
VERITAS Page 36 of36
TABLE I
Parameter UNIT Result Maximum AI1owable 1 2 3 Limit
Total Lead (Pb) mg/kg <10 <10 <10 100
CONCLUSION - PASS PASS PASS -Tested Item 1: Black plastic (handle) (A) Tested Item 2: Dull black plastic (handle) (B) Tested Item 3: Dark silvery metal (handle) (A)
TABLE2
Parameter CAS no. Unit Result Maximum Allowable
Limit 1
Dibutyl phthalate (DBP) 84-74-2 % 0.009 0.1
Butyl benzyl phthalate (BBP) 85-68-7 % <0.005 0.1
Di-2-ethylhexyl phthalate 117-81-7
% <0.005 0.1 (DEHP)
Conclusion - - PASS -
)Tested Item 1: I Black plastic (handle) (A)!/ dull black plastic (handle) (B)
HD