report - regent products corp.material is the only food grade materi.al used in the note 1:...
TRANSCRIPT
Buraau Vnrii~B Shonzhon Co,, Lid ~IF fl'oc~ 8, MtnlidJ indt•slri,JI 8uli~mq, ~!I! i:.Jne 01 Honqnuahnq lnduslriall'~r~ :<.li rown, Nanst•an Ors!n~r. 'lhen~hoOn, Gu;u,qricng, PH C f~i .Ol:' l55·iJ6GOO \51 lax !lll·7'>5 ~!illil11119 tMW UUIWllW~t;I.H '-<Jm:<cO~
REPORT Technical Report: (8515)084-0857
Page 1 of 33 APR 03,2015
TEST REPORT LAB LOCATION: LAB NUMBER: CLIENT NO.: DEPARTMENT: DATE IN: MOD. LOGIN: DATE OUT: REVISED DATE: PAGE:
SHENZHEN (8515)084.{)857 I 25 PARTY PAPER MAR 26,2015 I APR 03, 2015 I 2 of33
SUBMfSSION PROCESS OVERALL RATING
SamJ)IQ' Collection: US CN
X D Initial Sample Collection (OC's 1/5/8 Only) PASS
X
0 Sttcond Sample Coll&ctlon (OC's 21J/41mMf1014t1/412) SATISFACTORY
ll29 Single Sample Collection (AI DC's- 50% af Entlte QUIInilt)/ Produced) CORRECTIVE ACTION REQUIRED 1--+--1
0 Random Sampling of Failure (AD DC'&-90% 11fEntlro Quantity Produced) FAIL
D Random Sampling of Fallwe w/ Prop 65 (DC 419 & Non-OC 419-90% of Entire Quantity Produclld) FAIL·ACCEPT
D Vendor Direct
RANDOM SAMPLING REQUIRED ""VENDOR PLEASE NOTE RANDOM SAMPLING
IS REQUIRED ON ALL FAILED REPORTS"'
TESTING FOR PLASTIC FOOD CONTACT ARTICLE (V9)
CPSD • 06001.01 • US FOOD CONTACT ARTICLE (V7)
CPSD • 06001 ·US FOOD CONTACT ARTICLE (V14)
GRBI • 06001 • NA NON-REGULATORY ANALYTICAL TESTING (V9)
GRBI • 08443 • NA PLASTIC UTENSILS I CUTLERY (V21)
GRBI· 06051 • NA CALIFORNIA PROPOSITION 65 (V55)
GRBI-06572-US TOXICS IN PACKAGING CLEARINGHOUSE (V4)
Sub-Department No.: 12CATERING Additional ShiP Dale tcanadal: Vendor Number: 1783 Previous Report No.: Vendor Item Number: PP1112137 Production %: Test Type: INITIAL TEST I E3 Order: Revised Report: Yes: I I No: IX I I Charge Vendor I Yes: I X I No: Reason For Revision: I
TEST PASS SAn~rA<.ouo" CAR FAIL DATA
X
X
X X
REMARK(S);
1. See enclosed protocols ror the test results.
2. The following test results were upon document review of previous report • FDA document review(Report#65142670181) • Heavy metals content in packaging materials(Report#52140990271)
If there are questions regarding above report, please contact the appropriate lab personnel.
Technical questions, please contact: John Hong I Corey Huang (66)755-32980207 132980211 [email protected] Corey [email protected]
Administrative questions, please contact: Lora Xlan I Emy Zhao ( +86)75&-32960215 I 32980216 [email protected] [email protected]
BUREAU VERITAS SHENZHEN CO., L TO
/) -----r· I~,,
/ ~- r'' "!.~ t~Jv'--.__
BRIAN TAM MANAGER- HARDLINES DIVISION
I I I YES
I
I
I
I
(8515)084-0857 Page 3 of 33
I"'
•••••••• Y::R1T~S
# Califurn.ia Proposition. 65
• Resinuous and polymeric coating
• Acrylic and modified acrylic plastic
• Closures witb sealing gaskets
CPSD-AN-PTCL-06572-US
FDA21 CFR 1753001 CPSD-AN-00002-
MlHD
FDA21 CFR 177.1010 I CPSD-AN-00002-
MlHD
FDA21 CFR 177.1210 I CPSD-AN-00002-
MlHD
BUREAU VERIT AS TFST PROTOCOL FOR
65to or labeling is required.
BY Lab Nmnber: Tccbniciao Name: Test Date: Reviewed By/Date:
testing
For samples that fall under 1he scope of CAProp 65 requirements with testing fimit(s) but does not contain appropriate labeling (refer to labeling section for detail), actual testing will be conducted.
testing is not required
Note: -No test for dry food. Dry fuod means no free fiat or oil on the surtilce. -BPA-b....t
Note: -No test for dey' food. Dry fuod means no :free :fat or oil on thesurfitcc.
21CFR 1n.1210requiremenll!.
Note: -No test for dry food. Dryfuod means no ftee tat or oil on the su.rfilce. -Gaskets are only tested according to gasket requirements ofFDA21 CFR 177.1210. Vendor shall be""J'J'OSiblefor the material requ.iremwts, tm.less testing
(8515)084-0857
YALE MAR26-APR03.2015 HENRY I APR 02.2015 Page4of33
SEE CPSD-%572-US
M DOCUMENT PROVIDED
SEE REMARK
NA
NA
PASS
• Etb.yleoe vinyl acetate copolymers
• Melamine-fonna.Idehyde resins in molded articles
• Nyloo resins or polyamide
• Olefin polymers
• Polycarbonate resins
FDA21 CFR 177.1350 I CFSD-AN-00002-
M11ID
FDA21 CFR 177.1460 I CFSD-AN-00002-
M11ID
FDA21 CFR 177.1500 I CFSD-AN-00002-
M1HD
FDA21 CFR 177.1520 I CFSD-AN.()0002-
MTIID
FDA21 CFR 177.1580 I CFSD-AN-00002-
MTIID
BY Lab Number: (8515)08W857
Teclmician Na.me: YALE Test Date: MAR26-APR03.2015
Revi.,..,r By/Date: HENRY I APR02. 2015
PageS of33
Note: - Applyre.ts stated in 21CFR 177.1350 section (bXl) ooly. NA - No kst for dJy food. Dry :IOod means no free fat or oil on thesuriRce.
Note: NA - No tC'St for diy food. Dry fOod means no ftee fat or oil on thesurli=
Note: -Applicable to nylon resins stated in FDA 21 CFR
NA 171.1500 section (b) table, except Nylon 6/12 resins in point 13.1md 13.2.Nylon 6/69 resins in point 14 sad Nylon resin PA6-3-T in point 16.
Note: -Applicable to olefin polymers, including but not limited to NA polypropylene (PP) bomopol_,, polypropylene (PP) copolymer and polyethylene (PE).
NA
FDA21 CFR 177.1630 • Polyethylene phthalate polymers I CFSD-AN-00002-
M1HD
Polystyrene or rubber-modified FDA21 CFR 177.1640 • I CFSD-AN-00134-
pclystyrene M1HD
FDA21 CFR 177.1810 • Styrene block polyme; I CFSD-AN-00002-
M1HD
FDA21 CFR 177.1830 • Styrene-methyl methacrylate copolymer I CFSD-AN-00002-
M1HD
Urea-formaldehyde resins in molded FDA21 CFR 177.1900
• I CFSD-AN-00002-articles M1HD
• Polyvinyl ebloride
FDA21 CFR 177.2410 • Phenolic resins in molded articles I CFSD-AN-00427-
MmD
CPSD -06001.01- US
BV Lab Number. Tecbnicilm Name: Test Date: Reviewed By/Date:
(8515)084~57
YALE
MAR 26-APR 03. 2015 HENRY I APR 02. 2015 Page6of33
NA I
NA
NA
NA
NA
NA
NA
BV Lab Number: (8515)084-0857 Teclmicilm Name: YALE Test Date: MAR26-APR 03, 2015 Reviewed By/Date: HENRY I APR 02. 201 S
Page? of33
FDA21 CFR 177.2420 Note:
• Crossl.inked polyester resins I CPSD-AN-00002- -Applicable to repeated use articles or compooen.IS of NA articles intended to contact with food. MTIID -No test for diy food. Dry food means no ftee fit.t or oil on
the surfilce.
Note: -Applicable to both finished product and mw material.
FDA21 CFR 177.2470 - Applicable to repeated use articles or components of • Polyoxymethylene copolymer I CPSD-AN-00002- articles intended to contact with food, but use tempcmture NA
MTIID shall not e::tceed 250 "F. -No test for dry food. Dry fOOd means no :free :fat or ail on the sur:liloe. -Apply tests stated in 21 CFR 177.2470 section (d) only.
Note: -Applicable 1D botb finished product and raw material -Applicable to repeated use articles or components of articles intended to contact with food, but use tempem:ture
FDA21 CFR 177.2480 sball not exceed 250 Of.
• Polyoxymctbylene homopolymer I CPSD-AN-00002--No test far diy food. Dry fuod means oo ftee fat or oil on NA tbesur&ce.
M11ID - Apply tests stated in 21 CFR 177.2480 section ( c )(3-4) and (d) only. - For finished product, apply density, melting point and soluble extractive tests only. -For raw material, apply demity, mdtingpoiDt, funnaldmyde release and soluble extractive tests only.
FDA21 CFR 177.2600 • Rnbber intended fiJr repeatOO use I CPSD-AN-00002- Note: NA
MTIID -Not applicable to rubbe-r musing-bottle nipples.
...... ··-·---· .••.••...............................................
• Acrylonitrile cqJOlymer and resins FDA21 CFR 181.32/
CPSD-AN-00155· M1HD
Note 1: Testing charge per material pereolar.
&<; • •• #
ResuJtKcv: c R M NM NA NT
Rating KeY: PASS FAll. NR
Additional Chmge For This Test Mandatory Requirement By Request Only
Claimed Recorded Meets Does Not Meet Not Applicable Not Tested
Pass Fail Not R<quested
BV Lab Number: (8515)084-0857
Technician Name: YALE
Test Date: MAR26-APR03.2015 Reviewed By/Date: HENRY I APR 02. 2015
Page 8of33
Note: -Test acrylonitrile copolymer and resins with acrylonitrile less. than 3QO!G oo:ly.
NA
Client Approval: I Creation nate: FEBRUARY 12,2010
Additional sample may be requested if insufficient.
Last Revision Date: APRIL 22, 2014 Pricing Review Date: MAY 24,2010 Technical Review Date:
••"'·~--•
" 0
T:s:::tS
• Paper aod paperboard
• Ceramic, porcelain, glass and eoamel
Wood
• Metal and metal alloy
* GRAS in non-metal materialdocument review
21 CFR 171}-189 FDA GenerallyRecogni2Ed
as Safe (GRAS) Guidelines I FDA
Opinion I CPSD-ANG00007-STIP01 I
CPSD-AN-G00007-STIP02 I CPSD-GB-
0000 1-STIP03
BUREAU VERITAS TEST PROTOCOL FOR
CPSD- 06001- US
come
BV Lab Number: Technician Name:
Test Date: Revi.,.j By/Date:
shaD meet FDA GRAS requirement All additives in that material, such as glue sball also mcc:t FDA GRAS requirement. Client sball provide the documentation with material bill or composition for material identification. It is acceptable for the client to submit either a FDA approval letter or, iftbere is in:foonation from FDA showing tbe material i9 acceptable. a guarantee le&r indicating the material is the only food grade materi.al used in the
Note 1: CPSD-AN-PTCL-06001.04-US will be offered to program client only.
(8515)01!U857
YALE MAR26-APR03. 2015
HENRY I APR 02. 2015
Page9 of33
PASS
NA
NA
NA
NA
NA I
~ • •• #
Result KeY: c R M NM NA NT
Raring Key: PASS FAIL NR
Additional Charge For This Test Mandatory Requirement By R<quest Only
Claimed Recotded Meets Does Not Meet Not Applicable Not Tested
Pass Fail Not R<quest<d
Please refer to supplemental protoools. Please reter to supplemental protocols. Please refer to supplemental protocols.
BY Lab N110>ber: Technician Name: Test Date: Reviewed By/Date:
Client Approval: Creation Date: Last Revision Date: Pricing Review Date: Technical Review Date:
(8515)084..()857
YALE MAR26-APR03. 20!5
HENRY I APR 02,2015 Page L0of33
I JANUARY 29, 2009 JANUARY 05,2015
~UKEAO
VEF:.11.:.~
* Food contact
• Lea;:hable lead i.n kettles
* ExtJactable lead and cadmium - interior
Glazed Ceramics and Glassware Regulations (SOR/98-1 76) I CPSD-
AN.OOOII-MTIID
6
BY Lab Nmnber: Technician Name: Test Date: Reviewed By/Date:
GRBI- 06001 - NA
Food contact article. whidl is completely or pardy made of ceramic, porcelain or glass and completely or partly coveted with coating. glaze or decomtion, sball not contain extractable leai (Pb) and cadmimn (Cd) exceed the following limits:
Cadmium (Cd): 0.25 ppm (mgfL) (any one of6 units for Large hollowware and Pitcllers) 0.5 ppm (rng/L) (any ODe of 6 UDits for Small hollowware, Cups and MuJ?I!) 0.5 ppm(rng/L) (anyooe of6 UDits for Flatwate)
I.ead(Pb): 1.0 ppm(rng/L) (any ODe of6 UDits for Large hollowware) 2.0 ppm(rng/L)(any ooe of 6 UDits for Small hollowware) 0.5 ppm(rng/L) (lillY ooeof6 UDits for Cups, Mugs and Pitchers)
(8515)!!84~57
YALE MAR26-APRffi,2015
HENRY I APR 02, 2015 Page 11 of33
SEE CPSD-06001-US
NA
NA
* Ext:tactable lead and cadmium in lip and rim
O:lazod Ceramics and Glassware Regulations (SORI98-176) I CPSD-
AN-0001 1-MTIID
6
BY Lab Number: Teclmicilm Name: Test Date: Reviewed By/Date:
Extemal decorated lip and rim area ofbeverage pro<hlcOI sball not contain extractable lead (Pb) and cadmium (Cd) exceed tbe fonowing limits in my of the 6 units:
Cadmium (Cd): 0.4 ppm (mg/L) Lead(Pb): 4.0 ppm(mg/L)
(8515)084~57
YALE MAR26-APR03. 2015 HENRY I APR 02. 2015 Page 12 of33
NA
• Bispbenol A content
Various US state laws (e.g. CT Public Act#
09-103 andMNCbaptor 40 SF #247) I Canada
Consumer Product Safety Act
(S.C.2010,c.21), Schedule 2, item 15/
CPSJ).AN-00169-MI11D
BVLabNumber:
Tcchoician Name: Test Date: Reviewed By/Date:
GRBI- 06001- NA
"Infant. formula" -means a c:o~yavailabl¢ mille based or-soy based powder, concea.trated.liquid or teady-tofeed substitute for human breast miJk,tbat·is intended for infu:nt consumption. 11Baby food" means a coilliDCl'Cially available prepared solid food consisting of a soft paste or an easily chewed :fuod that is intended for consumption by chi.ldren two ycam of age or younger. ~Y product" m:::ans products, including but not-limited ro·pacifi.ers,_ bl.Os. t())'So changingpad....eu::. intended to use by children three years ofage ()r yoUDger. "'Reusable food :or bev~ _containern means a_xeceptacle for st9riog food or.-beverages; includiog, but not limited to, baby bottles, spill-proof cup. sports bottles aod thermoses. and c:Kcluding containers intended for disposal after initial use.
Report actualmmlts or U.:lude dam 1able within report.
Note: - Actual testing will be conducted on:
(i) all accessible plastic materials in the product,. (ii) food contact plastic parts in the product.
- Vendors shall be respoDSIDie fur the compliance of all other materials.
(8515)08W857
YALE MAR 26-APR 03.2015
HENRY I APR 02. 2015 Page 13 of33
NA
• Total lead content in surface coating;
Canada Coosumer Product; Cootaining Lead (Contact with Mouth) Regulations (SOR/2010-273) I CPSD-AN-00461-
M111D
BY Lab Number: Technician Name: Test Date: Reviewed By/Date:
GRBJ- 06001- NA
Products for all ages (including adu1tl;) that haw accessible surface ooatingi lhat come imo contact with the user's mouth <bring normal U9e shall not contain lead or lead components in which the lead content is in excess of 0.009"/o (90ppm) of the weigbt of the total cont<nt.
Report actual results or include data table within report.
Component testing is aftowed. Compositing is not allowed.
Note: The foDov.ing products are excluded: ~ Kitchen utensils - Jeweky urula Cbildreo's Jeweky Regulations - Products su~ect to Glazed Ceramic and GW!swarc
(8515)084-0857
YALE MAR 2&-APR03. 2015 HENRY I APR02.2015 Page 14of33
M
SILVERY COATING
FORK, SPOON
ALL <IOPPM (<0.0010%)
PASS
• Total lead content in substrate materials
Canada Consumer Products O:>n<aining Lead (Contact with Moud:J.) Regulations (SORI20io-273) I CPSD-AN-00461-
Ml11D
BY Lab Number: (8515)084-4857 Tec!mician Name: YALE Test Date: MAR26-APR03. 2015
Reviewed By/Date: HENRY I APR02.2015
GRBI-06001-NA
Products for all ages (including adults) that have accessible substrates thBt come into contact with the user's mouth during normal use shall oot contain lead or lead componeiJts in which the lead conte:ot is in excess of 0.009% (90ppm) oflhe weight of the total content.
Report actual results or iDcludc data table within report.
Compo-nent 1eSting is aUowed. Com.positing is not allowed.
Note: The fuUowing prOOucts are exclude: - Kitchen utensils, -Jewelry under Children's Jewelry Regulatiom -Products subject to Glazed Ceramic and Glassware Regula.tiom. - Tbe following materials will be exempted from testing. It is the vendors responsibility to ensure compliance to the applicable requirements: Non-suspect materials as defined by the Consumer Products Safety Commission in 16 CFR 1 500.91 (d) and (e) (re:li:r to exemption list oflead in substnlte in the CPSD-GB-¥TCL-08444-US JrOU>COI fur
Page IS of33
M
DULL WHITE PLASTIC
FORK
A
<IOPPM (<0.0010%)
1RANSWCENTPLASTIC
SPOON
B <IOPPM (<0.0010'/o)
PASS
~ • •• #
Re,wltW M NM NA NT c R
Rating Key: PASS FAIL MARG
CAR
Additional Charge For This Test Mandatory Requireme:o.t By Request Only
Meets Does Not Meet Not Applicable Not Tested ClaUned Recorded
Pass Fail Marginal Corrective Action Required
12 retail products per s1yle
Please re:ter to supplemental protocol CPSD-ANPTCL-%001-US.
BV Lab Number: Technician Name: Test Date: RC\T:iewed By/Date:
Client Appro\'81:
Creation Date: Last Revision Date: Pricing Review Date: T ecbnical Review Date:
(8515)084-41857
YALE MAR26-APR03.2015
HENRY I APR 02. 2015
Page 16 of33
JANUARY 04,2011 MARCH 12, 2015
BV lab Number:
Technician Name: Test Date: Reviewed By/Date;
individual product protocols. It contains DOn-regulatory analytical testa of US and CN.
• Total lead content in swface coatings
* Total lead content in surface coatings
AOAC974.02 modified I CPSD-AN-
00001-MlHD
CPSD-AN-oooo9-M1HD
items outside of the scwe CFR 1303 shall not contain lead or lead components in which the lead content is in excess of0.06&'/o (600ppm) of the weigbt of the total conient.
Report actual results or include data table within report.
Component testing is allo'Ned. Compositing up to 4like materials is allowed. The composite result will be evaluated against the a.:§usted limit (regulatory limit divided by the DIIIIIheT of compo5ites).
the item outside of the scope of CCPSA shall not contain lead or lead components in whi<:b the lead content is in exce8S of0.06% (600ppm) of the weigbt oftbe total couteiJt..
Report actual resulls or include data table within rqJOrt.
Component testing is allowed. Compositing up to 4 like materials is all0'1t'ed.
(8515)0-57 YALE MAR 26-APROl, 2015
HENRY I APR 02.2015 Page 17 of33
M
SILVERY COATING
FORK, SPOON
ALL <10PPM (<0.0010%)
M
SILVERY COATING
FORK, SPOON
ALL <IOPFM (<0.0010%)
PASS
PASS
IMPORT ANT N01E: The information presented tmder the "Criteria" of this protocol is for infoiiDation only and does oot replace the cootent of the standard. Details of the requirements should be referred to the original-dards.
• •• #
Result Key; M NM NA NT c R
Ratjgg Key;
PASS FAll. MARG
CAR
Additional Charge For 'Ibis Test Mandatory Requirement By Request Only
MeelS Does Not Meet Not Afplicable N«Tested Claimed Recoxded
Pass Fail Marginal Corrective A<tioo Required
BY Lab Number:
Technician Name: Test Date: Reviewed By/Date:
Client Approwl:
Creation Da.te: Last Revision Date: Pricing Review Date: Technical Review Date:
(8515)084-4857
YALE
MAR26-APR03. 2015
HENRY I APR 02. 2015
Page l8 of33
FEBRUARY 11.2011 MAROI12, 2015
• Non Regulatory Analytical Testing
• Califomia Proposition 65
• Children's Product
GRBI-IJL.PTCL-065ll-US
GRBI-TY-PTCL-08001-NA
BV Lab Number: (8515)084-ll857
Technician Name: YALE Test Date: MAR26-APR03. 2015
Reviewed By/Date: HENRY I APR02.2015
Page 19 of33
1 or more supplemental protocol is nocessacy. Please refer to the above refereoced supplemental protocol( s) fur additional
SEE GRBI-<18443-NA
SEE GRBI-065ll-US
NA
VERITAS
* Food con.Jact articles
• Toxics in Packaging Clearinghouse
GRBI·H~PTC~ 06001-NA
GRBI-~PTCL· 090623-NA
BY Lab Number: Technician Name: Test: Date:
Reviewed By/Date:
GRBI- 06051- NA
conform to the applicable requirements of the Food. Drug, andCosmeticAct(FDCA),spccmcaUy21 CFR 170 tlttougb I 89.
Special requirements for Plastics: - In lieu of testing, test report can be submitted if dated within six: months. For-food contact items ~.otaining.PVC, PETG; St)'I'e:De Block Polymers, Polyester_ Elastomers or ABS (Acrylonitrile> ~0%),.-it:is ac~t,&,le·forthe vendor to-submit a test report (dated within SIX months) indicating that only-fOod gmde materials were u.sed in the manufacturing process.
Special requirements fur Metal: - All metal components of cups, mugs or other food contact articles sball be constructed of an FDA recognized grade of stainless steel. Stamless Steel Grades: 302,304, 3041',316,321, 410,416, 420 (cutlecy ooly), 440, 440A, 440C, 9041., A-36 and CF-1018. -For any other grade of stainless steel or other metal, vendor need to provide the list of compositions or will have the mat<:rial evaluared which sbaU be submitll:d to the FDA for review and approval for me in fuod contact articles. (Vendor shall be responsible fur the accumcy of infbnnatioo provided) In lieu of testing. test report can be submitted if dated within six months.
Special requirements fur ceramic, porcelain, glass or enamel: -As a Dollar Tree Requirement, for Califuroiabealth and safety code section 108870- All tableware iteJm, regardless of extractable Lead & Cadmiumlr:St result, distributed in tbe State of California must be permanently and indelibly marked with the name, or iftbr: item is too
a registered trademark, of the manufacturer or
:eo~OJl<l'ndiog table G-0104 atthemd of this
(8515){!84.o8S7
YALE
MAR 26-APR 03. 2015
HENRY I APR 02. 2015 Page20of33
SEE GRBHJ6001-NA
SEE GRBI-M062.3-NA
and U.bding Act OR All 01her •• Products UnifOrm Packaging and
Labeling Regulations w report a pass or fail fur FPLA and IqXJrt as data only
and Labeling Act OR All Other ** Produc1s Unifurm Packaging and
Labeling Regulations- report a pass or fail for FPIA and report as data. only
and Labeling Act OR All Other •• Products Uniform Packaging and
Labeling Regulations - report a pass or fail for FPLA and report as data only
** Cotmtry of origin
F.P. and L. Act(16 CFR 500) OR NJST Unifurm Laws and
Regulations Handbook 130
F.P. and L. Act (16 CFR 500) OR NJST Uni.fu.rm laws and
Regulations Handbook 130
F.P. and L. Act (16 CFR SOO) OR NIST Uniform Laws and
Regulations Haodbook 130
19CFR 134
BY Lab Number: Teclmician Name: Test Date: Reviewed By/Date:
GRBI- 06051- NA
(8515)084-0857
YALE MAR26-APR03. 2015
HENRY I APR02,201S
Page21 of33
PROVIDED DATA
PROVIDED DATA
PROVIDED DATA
M MADE IN CHINA
PASS
• Consumer packaging and labeling ** regulations
The consumer packoging aOO labeling act, R.S. 1985, C. C-38 and regulations, C .R C.,
C.417
BY Lab Number: Technician Name: Test Date: Reviewed By/Date:
GRBI-06051- NA
(Packaging "'Copy .. Or Artwork Request Form May Be Substituted) Manufacturer or distributor's name & address (City & POtital Code). Minimum 1.6 mmtype size. Placed anywhere except bottom- English or French
Where the area of the principal dioiplay sur&ce of a container is 1.55 square iaclxs (10 square centimetres) or less. the infom::tation may be ia letters of not less than 1/32 incb (0.8 millimetre) in beight.
Where a prepackaged product is wholly manufactured or produced in a country other than Canada, the marking shall consist of one of the fullowiog: -The name and address of a Canadian dealer preceded by the wonls ";mported by" ("'importe por") or ";mported fo<" ("'inlporte pour"); or -The statement of geogmphic origin located irrpn]P{Iiately adjacent to the name and address of a Canadian dealer; or -The name and address of the dealer outside Canada
Product Net Quantity Declaratioo must be in English and French. metric U!lits, on PDP • bold, type size based on PDP size Principal Display Panel Minimum Type <32 em' (Sin') 1.6 mm ( l/161n) >32 em' but <258 em' (40 In') 32 mm (1/8 In) >258 cm'but<645cm'(IOO ln')6.4mm (114 In) >645 cm'but<25.8 dm' (400 In') 9.5 mm(3/81n) >25.8 dm' (400 In') 12.7 mm (1121n)
Product Identification Bhall be &,glli;b. and Frcoch. on PDP
(8515)084-0857
YALE MAR26-APR03.2015 HENRY I APRO:Z. 2015 PageZl of33
M PASS
BUFtEAIJ
• Consumer packagiiJg and labeling n regulations
** Country of origin marking
The co.....,., pacbgii>g and labeling act,R.S. 1985,C. C-38 and regulations, C.RC.,
C.417
Canada Customs Tarlft: Marking oflmpot1od Goods bgulatitns,
SOR-94-10 /Marl<ing oflmporu:dGoods
MemorandumDll-3-1
BV Lab Number: Technician Name: Test Date: Reviewed By!Date:
GRBI- 06051- NA
Typeface not stipulated must be legible to tbe consumer. In certain cases where the container bas a IXincipal display surfilce of!O em' (1.55 in') or less, the minimum !)pe height may be reduced to 0.8 mm (l/32 D.) Rc10r tn section 16 of the regulation. An exemption from declaring product identity may apply under the fullowing conditiODS: I) Product is sold by count and is packaged in a way that it is visible and identifiable. 2) The labd has an accurate pictorial rqJresentation of1he package contents.
is verified besed on English. French
Imported goods shall indicate country of origin. Must be legible and sufficiently permanent to
remain on the goods UDtil it reaches the purebaser. c) For goods from NAFTA countries, the language maybe English, French or Spanish. d) For goods from non-NAFTAcotmbies, language may be English or French aDd mark:i.og should appear on individual articles. e) Ifthe
f)
(8515)084.j)857
YALE
MAR 26-APR03, 2015 HENRY I APR02, 2015 Page23 of33
M PASS
M MADE IN CH1NA PASS
• Total lead content m surface coating;
Canada Consumer Products Containing Lead (Cmta<! with Moulh) Regulatiom (SOR/2010.273) I CPSD-AN-00461-
MfllD
BV Lab Number: Technician Name: Test Date: Reviewed By/Date:
GRBI • 06051 • NA
Products for all ages (including adults) that bave accessible sudace coatings that come into contact witb the user's mouth during normal usc shall.aot cootai.n lead or lead components in which the lead content ii in excess of 0,0()90./o (90ppm) of the weight of the total content.
Report actual results or include data table within report.
Compm.ent testing is allowed. ColllJIOSiting is not allowed.
Note: The foUowiog products arc excluded: - Kitchen utensils -Jewelry under Children's Jeweby Regulations - Products subject to Glamd Ceramic and Glassware
!8SIS)084-0857
YALE MAR26-APR03,2015
HENRY I APR 02. 2015
Page24of33
M
SILVERY COATING FORK,SFOON
ALL <IOPPM (<0.0010'/o)
PASS
•
•
Canada Consumer Products Containing Lead (C<mtact with
T otallead content in substrate materials Mouth) Regulations (SORI2010-273) I CPSD-AN-00461-
MI11D
AOAC 974.02 IDD<Iified Total lead oontent in surface coatings I CPS~AN~l-
MI11D
BY Lab NUIDber: (851Sl084-G857 Technician Name: YALE Test Date: MAR26-APR 03.2015 Reviewed By/Date: HENRY I APR02. 2015
GRBI-06051-NA
Products fur all ages (including adults) that bave accessible I Sllbs .. les that come into contact with the user's mouth
during nonnal use shall not contain lead or lead compoo.ents in which the lead conteot is in excess of 0.009% (90ppm) of the weight of the total content.
Report actual results or include data table within report.
Compao.ent testing is allowed. Compatiting is not allowed.
Note: The fullowing products are exclude; - Kitchen utensils, -Jewelry l.Dlder Children's Jewelry Regulations - Products subject to Glazed Ceramic and Glassware Regulations. -The fullowing materials will be exemp<ed from n:.ting. It is the vendors responsibility to ensure compliance to lhc applicable requirements: Non-suspect materials as defined by the Consumer Products Safuty Conunission in 16 CFR 1500.91 (d) aJXI (e)(refertoexemptionlistoflead in substrate in the CPSD-GB-PTCL-08444-US protocol for
items outside ofthe CFR 1303 shall not cootain lead or lead components in which the lead content is in excess of0.003% (30ppm) of the -weight of the total coDI<ot.
Report actual results or include data table within report.
Component testing is allowed. Compositing is not allowed
Pagc25of33
M
DULL WHITE PLASTIC
FORK
A
<I OPPM ( 4l.OO I 0'/o)
1RANSLUCENT PLASTIC
SPOON
B <I OPPM ( <0.00 I 0'/o)
M
SILVERY COATING
FORK., SPOON
ALL <IOPPM (<0.0010'/o)
PASS
PASS
EPA 3050B modified I EPA 3051A modified I EPA 3052 modified I
* Total lead contolt in substrate materials CPSD-AN..(l()(}{)7~
Sharp points I edges
Exposed edges- metals
Exposed edges - plastics
MTIID I CPSD-AN-00008-MUID I CPSD
AN-00164-MTHD
16 CFR 1500.481 1500.49 modified
SOR/2011-17 section 8 modified
SOR/2011-17 section !Omodified
All
All
All
BY Lab Number: (8515)084-0857
T echnicia:n Name: YALE Test Date: MAR 26-APR 03,2015 Revi.-w.d By/Date: HENRY I APR 02.2015
GRBI-06051-NA
Report actual results or include data table within report.
Component testing is allowed. Compositing is not allowed
Note: Non-suspect materials as defined by tbe Consumer Produc1B Sati>tyCommission in 16 CFR 1500.91 (d) and (e) (refer to exemption list oflead in substrate in lhe CPSD-<lS-PTClAJ8444-US prollJcd fur delail).
Shall not reveal hazards associated with exposed metal edges. All edges shall be fOlded back or spmyed with or dipped in paint or otherwise treated in order to eliminate all sharpness and burrs.
Shall not reveal hazards associated with exposed sharp plastic edges through ~nably fOreseeable use
Page26of33
M
DULL WlllTE PLASTIC
FORK
A
<IOPPM (<0.0010'/o)
TRANSLUCENT PLASTIC
SPOON
B <I OPPM ( <0.00 I Cl'/o)
M
NA
M
PASS
PASS
PASS
Wooden surfaces, edges and co.rners
Exposed edges and comers on glass
Exposed ends oo wire frame or structure
Dishwasher exposure
Heat resistance
SOR/2011-17 section II modified
SOR/2011-17 =tiou 12 modified
SORJ2011-I7 section 9 modified
CPSD-HL-01014-MTIID I DisbWllSher
A£tual use I CPSD-HL-01058-MIHD
Additional Charge For This Test
All
All
All
BV Lab Number: Technician Name: Test Date: Reviewed By/Date:
GRBI- 06051- NA
Sball bave all of its "'p<J6<d wooden sw:fil=, edg., and comers s1m0thly finished
Shall have all of its edges and comers of the glass smoothly fiDisbed
ShaD not reveal hazards from eJq)OSCd sharp end'i on wire fumes or structures. prior to or following reasonably foiCSeeable use. All wire ends shall be covered, tumed in or turned back.
S cycles- Color cbaoge Class 3, no permanent defOrmation
(8SIS)GS4-08S7
YALE
MAR 26-APR 03,2015
HENRY I APR02. 2015 Page27 of33
NA
NA
NA
NA
NA
l,i"""i~
0.
" ~
;.;;~a
8UKEAI.l
•• #
Re:mltKey: M NM NA NT c R
Rating Key;
PASS FAlL MARG
CAR
Mandatory R<:quirement By R<:quest Only
Moets Does Not Meet Not Applicable Not Tested Claimed RecoRied
p.,. Fail Margiual Corrective Action Required
BY Lab Number: Technician Name: T<S!Dat<: Rt:Viewed By/Date:
(8515)084-<)857
YALE
MAR26-APR03.2015
HENRY I APR02.2015
Page28 of33
Trademark of tile manufacturer or importer.bmp
Principal Display Panel.jpg
Product Net Quantity
Declaration must be in English and French, melricunils, on PDP, bold, type size based on PDP size
12 retail products per style
BV Lab Nmnber: Technician Name: Test Date: Reviewed By/Date:
Client Approval:
Creation Date: ~t Revision Date: Pricing Review Date: T ecbnical Review Date:
(8515)084-0857
YALE MAR 26-APR 03. 2015 HENRY I APR 02.2015 Pagc29 of33
DECEMBER 06, 2007 MARCH 12,2015 MAY08,2013 MAY08,2013
65 Applicable section from
protocol CPSD-AN
PTCL-06572.01-US
GRBI.0657:Z..US
All samples shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or labeling is
BV Lab Nt.UDber: Techniciaa Name: Test Date:
Reviewed By/Date:
{8515)084-0857
YALE
MAR26-APR03.2015
HENRY I APR 02. 2015
Page30of33
NA
San Fmocisco Superior Court, CGC-04-436429 INIOSHmethod 9100 modified/ EPA 3050B
GRBHI657!-US
Plastic and metallic ware fuod and beverage use product with exterior decoration shall comply one of the fullowing requirements:
b. Without decoration in the lip and rim area, the exterior sur:filce shaU produce a result of l.O microgl1llm or less lead aDd 8.0 mic~ or less cadmium, in Ghost Wipe test,
or b. With decoration iD the lip and rim area, all colored markings shall coo.tain 600 ppm (0.06%) or less total lead and 4800 ppm (0.48"/o) or less total cadmium.
Note: -For requinment (a), compositing is not allowed - For requirement (b). composite up to 3 colon on like rubstrates.lfthe composite result exceeds lhe adjusted limit (regulan>ry limit divided by lhe DU.Illber of oomponents). for component out of lhe scope of CPSIA, iOOividualmaterials will be analyzed. - For component test together with CPSIA, transfer the CPSIA lead resu1t here for compliance. - Applicable to plastic or metallic product intended to come in con1act with fuod or liquid. including plastic, resin, vacuum metalizin& dolomite and metal beverage containem, except cookware. - DecoratioDS include color on top of the base
BV Lab Number: Technician Name: Test D.,.: Reviewed By/Date:
(8515)084-41857
YALE
MAR 26-APR 00. 2015
HENRY I APR 02. 2015 Pase31 of33
MIPASS SEE ATTACHED
BUREAU ..............
* Heavy metals content in packaging materials - documentation review
,. Heavy metals content in packaging materials
Mode) taxies in packaging legislation of the toxic:s in pacl:sging clearingbouse (fPCH)
Model taxies in packaging legislation of the Toxics in Packaging Oearingbouse (TPCH) I
CPSD-AN-00065-MUID
Varies
BY Lab Nmnber: T echni.cian Name: Test Date: Reviewed By/Date:
GRBI- 09062.3- NA
sum of concentration levels of lead, cadmium, mcreuty and hexavalent chromium in packaging or packaging componentssballnot <Xceed 100 mWkg(IOO ppm) by wrigbt
In lieu of testing, test report can be submitted if dated
sum ofl~ cadmium. mercury and hexavalent chromium in packaging or packaging components shall not c:K.<:eed I 00 ml!ifkg ( 100 ppm) by wrigbt
Note: I. Total cbrominm(Cr) is detennined fust. C<mfinnalion of hexavalent chromium (Cr VI) will be p<rlonned when concentration of total chromium is above the detection limit and sum of concentration of ibur heavy metals is exceeded the limit. 2. Max. composite up to 3 like ma!erials. 3. CoiDpOSite across styles is acceptable.
(8515)084-4857
YALE
MAR26-APR03. 2015 HENRY I APR 02, 2015 Pase32of33
M DOCUMENT PROVIDED
SEE REMARK
NA
PASS
K£i; • •• #
Result Key: M NM NA NT c R
Raring Key;
PASS FAIL MARG
·cAR
Additional Charge For This Test Mandatory Requirement By &quest Only
Meets Does Not Meet Not Applicable Not Tested Claimed Recorded
Pass Fail Marg;nal Car:rective Action Required
BY Lab Nmnber: Techniciaa Name: Test Date: Reviewed By/Date:
Client Approval:
Creation Date: Last Revision Date: Pricing Review Date: Technical Review Date:
(8515)084-'1857
YALE MAR26-APR 03, 2015
HENRY I APR 02, 2015 Pase33 of33
OCTOBER 20, 2008 MARUI 12,2015 JANUARY 20, 2001
Report No: (8515)084.0857 Code: SZA025 Prepared By: Alan Date: Apr02,2015 Checked By: Sam Lee Date: Apr02,2015
Gbost Wipe Test For California Propostdon 65
Tested Item Result (Ill!) Lead Cadmium
Blank <0.5 <0.5 I. <0.5 <0.5
Sample Description: Limit (Jig)
Conclusion Lead I Cadmium
1. ISPOON(B) Lo I 8.0 PASS
Note: < = less than J1g =microgram
Method: Lead and cadmium oonten1s are determined with reference to NIOSH Method 9100. Lead in Surface Wipe Samples and analyzed by Atomic Absorption Spectrometer.
Pagel of l