reproduction, also by extracting and reproducing photos ... › uploads › stainless steel... ·...
TRANSCRIPT
All rights reserved.Reproduction, also by extracting and reproducing photos are only permitted with written authorization of mahe medical GmbH.
All offers, orders and deliveries are subject to mahe medical GmbH “General Sales and Delivery Terms”. We reserve the right to modify our range of products and their design as well as to deviate from the illustrations and data shown.
1
OSTEOSYNTHESIS – STEEL IMPLANTS OSTEOSYNTHESIS – STEEL IMPLANTS (Bone: Plates / Screws / Pins / Wires / Staples ) non-sterile IMPLANT MATERIAL:IMPLANT MATERIAL: Implants made from steel in accordance with ISO 5832-1 stainless steel; ISO 5832-9 high nitrogen stainless steel manufactured by MAHE medical GmbHThe surface of these implants is chemically passive: not magnetic.These implants can be combined with the standardised material provided that its composition lies within the analysis stipulated in the ISO 5832-1 / ISO 5832-9 standard and the required specifications.Material alloys with chrome-nickel (implant steel) components can trigger a so-called chrome-nickel allergy by their nature; there are no other known biocompatible hazards!
INSTRUCTIONS FOR USE 3.INSTRUCTIONS FOR USE 3. (GB)(GB)Warning: The implants described may only be used in combination with MAHE products!Warning: The implants described may only be used in combination with MAHE products!
INDICATIONSINDICATIONSThese relate to the current practice of applications of implants in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6).
CONTRAINDICATIONSCONTRAINDICATIONSAcute and chronic infections; muscle, nerve or vascular diseases that endanger the affected extremity; a lack of bony tissue or bony tissue or bony tissue or poor bone quality (e.g. severe osteoporosis); local bone tumours. Systemic diseases and metabolic disorders; infections and falls; drug dependence; obesity; highly physical activities together with activities involving extreme vibrations which can lead to overstraining of the implants.
STERILISER : Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1 - 1.2 bar (15 to 17 psi) with an exposure time of with an exposure time of with an exposure time of at least 30 minutes in the packaged state.
STERILISER : Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in. Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 - 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.
IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.
NOTESNOTESThe user should record and keep all information provided to the patient. It should be checked before use whether the patient tolerates the material to be implanted. The implants described in these instructions for use may only be used (implanted) by surgeons with the appropriate experience.
REMOVAL OF IMPLANTSREMOVAL OF IMPLANTSThe implants are normally removed once the fracture has healed.CLEANING AND STERILISATION OF UNSTERILE IMPLANTSCLEANING AND STERILISATION OF UNSTERILE IMPLANTSBefore use, the implants must be sterilised using a validated procedure (autoclaved).
MAHE medical GmbH VALIDATED PROCEDURESMAHE medical GmbH VALIDATED PROCEDURES
POSSIBLE NEGATIVE EFFECTS (RISKS)POSSIBLE NEGATIVE EFFECTS (RISKS)Failure of the fracture to heal, allergy to the material, failure of the product (break, bending), bone deformation and refracture, infection.
- When selecting implants (bone: plates / screws / pins / wires / clips), care must be taken to choose the appropriate implants on the basis of the weight and level of activity of the patient, and the bone fracture to be treated.- Note that by making the correct choice of biomechanics the forces to be transferred by the implants remain low.- Extreme deformation of the implants must be avoided; the cautious bending of wires, plates and pins does not, however, lead to implant damage provided it is done with sufficient care.- Repeated deformation should be avoided at all costs as it will fatigue the implant material.- The re-use of implants is absolutely forbiddenThe re-use of implants is absolutely forbidden (single use). (single use).- We strongly advise you to inform patients of the advantages and disadvantages of implants.- Excessive strain as a result of body weight and the level of activity of the patient should be avoided due to the limited strength of the implants. Failure to observe these precautionary measures can have serious consequences for the healing process.
We would point out that implants only function correctlyWe would point out that implants only function correctlyif the following basic rules are observed :if the following basic rules are observed :
2
SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT-AND IMPLANT SET
Ref. No. PRODUCT-DESCRIPTION: Instruments PCS .:TRAY-011-0010-003 Tray for mini fragment basic instrument-and implant SET-011-0010-003
(Graphic Case)-1-
005-0210-011 Drill bit – AO shaft Ø 1.1 mm x length 60 mm / 35 mm -2-
005-0210-015 Drill bit – AO shaft Ø 1.5 mm x length 85 mm / 60 mm -2-
005-0210-019 Drill bit – AO shaft Ø 2.0 mm x length 100 mm / 75 mm -2-
055-0210-026 Drill bit – AO shaft Ø 2.7 mm x length 100 mm / 75 mm -2-
005-0210-088 Countersink – AO dental shaft for mini screws Ø 1.5 mm / Ø 2.0 mm -1-
005-0210-089 Small countersink Ø 3.5 mm used for Ø2 .7 mm/Ø 3.5 mm Ø 4.0 mm screws, tip Ø 2.0 mm -1-
005-0210-095 Tap handle for dental shaft -1-
005-0211-015 Tap dental shaft Ø 1.5 mm used for Ø 1.5 mm cortical screws -2-
005-0211-019 Tap dental shaft Ø 2.0 mm used for Ø 2.0 mm cortical screws -2-
005-0211-026 Tap AO shaft Ø 2.7 mm with cortical pitch 1.0 mm used for Ø 2.7 mm cortical screws -2-
005-0211-043 Tap handle with AO – quick coupling -1-
005-0212-015 Mini drill sleeve used for Ø 1.1 mm / Ø 1.5 mm drill bits -1-
005-0212-020 Drill guide 2.0 mm within 3/1 hole used for Ø 2.0 mm drill bit and K-wire Ø 2.0 mm -1-
005-0212-026 Tap sleeve Ø 3.5 mm, also use as Ø 3.5 mm drill guide -1-
005-0219-003 Depth gauge used for Ø 1.5 mm up to Ø 2.0 mm screws -1-
005-0219-004 Depth gauge used for Ø 2.7 mm up to Ø 4.0 mm screws -1-
005-0219-039 Sharp - hook -1-
005-0219-097 Screw holding forceps -1-
005-0229-001 Bending iron for mini and finger plates -1-
009-0390-015 Mini hex. screw driver with self-holding sleeve (hex. flats 1.5 mm) used for Ø 1.5 mm / Ø 2.0 mm screws
-1-
009-0390-025 Small hex. screw driver with self-holding sleeve (hex. flats 2.5 mm) used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws
-1-
010-0020-090 Reduction forceps with points, length 135 mm -1-
010-0020-350 Small hohmann retractor 6 mm -1-
010-0020-352 Small hohmann retractor 8 mm -1-
010-0020-354 Small hohmann retractor with broad shank -2-
010-0020-800 Periosteal elevator, extra small, curved blade and straight edge, width 3 mm -1-
005-0717-012 Holding forceps 12 cm -1-
SET - LISTING - CONTENT FOR SET : SET-011-0010-003
TRAY-011-0010-003 Tray for Mini Fragment Basic Instrument -and Implant SET-011-0010-003 ( Graphic Case Steel )
INDEX: SET -011-0010-003 SET– LISTING – CONTENT: ( PAGE 2 UP TO PAGE 4) : INSTRUMENTS & IMPLANTS
3
SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT-AND IMPLANT SET
Ref. No. PRODUCT-DESCRIPTION: K-WIRES PCS .:004-0310-010 K-wire with single trocar point Ø 1.0 mm x length 150 mm, round end -10-
004-0310-012 K-wire with single trocar point Ø 1.2 mm x length 150 mm, round end -10-
004-0310-016 K-wire with single trocar point Ø 1.6 mm x length 150 mm, round end -10-
004-0330-008 K-wire with single trocar point Ø 0.8 mm x length 70 mm, round end -10-
004-0330-010 K-wire with single trocar point Ø 1.0 mm x length 70 mm, round end -10-
Ref. No. PRODUCT-DESCRIPTION: Steel Fullthreaded Cortical Screws Ø 1.0 mm PCS .:001-0001-006 Ø 1.5 mm x length 6 mm -4-
001-0001-007 Ø 1.5 mm x length 7 mm -4-
001-0001-008 Ø 1.5 mm x length 8 mm -4-
001-0001-009 Ø 1.5 mm x length 9 mm -4-
001-0001-010 Ø 1.5 mm x length 10 mm -4-
001-0001-011 Ø 1.5 mm x length 11 mm -4-
001-0001-012 Ø 1.5 mm x length 12 mm -4-
001-0001-014 Ø 1.5 mm x length 14 mm -4-
001-0001-016 Ø 1.5 mm x length 16 mm -4-
Ref. No. PRODUCT-DESCRIPTION: Steel Fullthreaded Cortical Screws Ø 2.0 mm PCS .:001-0002-006 Ø 2.0 mm x length 6mm -6-
001-0002-008 Ø 2.0 mm x length 8mm -6-
001-0002-010 Ø 2.0 mm x length 10mm -6-
001-0002-012 Ø 2.0 mm x length 12mm -6-
001-0002-014 Ø 2.0 mm x length 14mm -6-
001-0002-016 Ø 2.0 mm x length 16mm -6-
001-0002-018 Ø 2.0 mm x length 18mm -6-
001-0002-020 Ø 2.0 mm x length 20mm -6-
Ref. No. PRODUCT-DESCRIPTION: Steel Fullthreaded Cortical Screws Ø 2.7 mm PCS .:001-0003-006 Ø 2.7 mm x length 6 mm -6-
001-0003-008 Ø 2.7 mm x length 8 mm -6-
001-0003-010 Ø 2.7 mm x length 10 mm -6-
001-0003-012 Ø 2.7 mm x length 12 mm -6-
001-0003-014 Ø 2.7 mm x length 14 mm -6-
001-0003-016 Ø 2.7 mm x length 16 mm -6-
001-0003-018 Ø 2.7 mm x length 18 mm -6-
001-0003-020 Ø 2.7 mm x length 20 mm -6-
001-0003-022 Ø 2.7 mm x length 22 mm -6-
001-0003-024 Ø 2.7 mm x length 24 mm -6-
Ref. No. PRODUCT-DESCRIPTION: Steel Washer PCS .:001-0013-001 Washer for Ø 2.7 mm screws -6-
Ref. No. PRODUCT-DESCRIPTION: Steel Plates for Ø2.7mm Screws PCS .:002-0060-007 Small T-plate length 32 mm x 3 holes, 2.7 mm -4-
002-0060-004 Small L-plate length 34.5 mm x 3 holes, Oblique LEFT, 2.7 mm -2-
002-0060-005 Small L-plate length 34.5 mm x 3 holes, Oblique RIGHT, 2.7 mm -2-
002-0014-023 Quarter tubular plate, length 23 mm x 3 holes, 2.7 mm -2-
002-0014-031 Quarter tubular plate, length 31 mm x 4 holes, 2.7 mm -2-
002-0014-039 Quarter tubular plate, length 39 mm x 5 holes, 2.7 mm -2-
002-0014-047 Quarter tubular plate, length 47 mm x 6 holes, 2.7 mm -2-
002-0014-055 Quarter tubular plate, length 55 mm x 7 holes, 2.7 mm -2-
002-0014-063 Quarter tubular plate, length 63 mm x 8 holes, 2.7 mm -2-
SET - LISTING - CONTENT FOR SET : SET-011-0010-003INDEX: SET -011-0010-003 SET– LISTING – CONTENT: ( PAGE 2 UP TO PAGE 4) : INSTRUMENTS & IMPLANTS
4
SET - LISTING - CONTENT FOR SET: SET - 011 - 0010 - 003
SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT-AND IMPLANT SET
INDEX: SET -011-0010-003 SET– LISTING – CONTENT: ( PAGE 2 UP TO PAGE 4) : INSTRUMENTS & IMPLANTS
Ref. No. PRODUCT - DESCRIPTION: Steel Plates for Ø 1.5 mm and Ø 2.0 mm Screws
PCS .:
002-0065-007 Mini T-plate 2 holes, 2.0 mm -4-
002-0065-001 Mini L-plate 2 holes, Oblique LEFT, 2.0 mm -2-
002-0065-002 Mini L-plate 2 holes, Oblique RIGHT, 2.0 mm -2-
002-0074-017 Mini plate straight 3 holes x length 17 mm, 2.0 mm -2-
002-0074-023 Mini plate straight 4 holes x length 23 mm, 2.0 mm -2-
002-0074-029 Mini plate straght 5 holes x length 29 mm, 2.0 mm -2-
RECOMMENDED STERILIZATION CONTAINER FOR SET -011-0010-003Ref. No. STERILIZATION CONTAINER
C-110-135 1/1 Size container, bottom non perforated outside 580x 80x135 mm / inside 550x265x115 mm
5
INSTRUMENTS FOR MINI FRAGMENT SYSTEM
005-0211-015 Tap dental shaft Ø 1.5 mm used for Ø 1.5 mm cortical screws
005-0211-019 Tap dental shaft Ø 2.0 mm used for Ø 2.0 mm cortical screws
005-0211-026 Tap AO shaft Ø 2.7 mm with cortical pitch 1.0 mm used for Ø 2.7 mm cortical screws
005-0210-088 Countersink – AO dental shaft for mini screws Ø 1.5 mm / Ø 2.0 mm
005-0210-095 Tap handle for dental shaft
005-0211-043 Tap handle with AO – quick coupling
005-0212-015 Mini double drill sleeve used for Ø 1.1 mm / Ø 1.5 mm drill bits
005-0212-016 Mini double drill sleeve used for Ø 1.5 mm / Ø 2.0 mm drill bits
005-0210-089 Small countersink Ø 3.5 mm used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws, tip Ø 2.0 mm
005-0210-011 Drill bit – AO shaft Ø 1.1 mm x length 60 mm / 35 mm
005-0210-015 Drill bit – AO shaft Ø 1.5 mm x length 85 mm / 60 mm
005-0210-019 Drill bit – AO shaft Ø 2.0 mm x length 100 mm / 75 mm
005-0210-020 Drill bit – AO shaft Ø 2.0 mm x length 125 mm / 100 mm
005-0210-026 Drill bit – AO shaft Ø 2.7 mm x length 100 mm / 75 mm
005-0210-027 Drill bit – AO shaft Ø 2.7 mm x length 125 mm / 100 mm
005-0210-211 Drill bit – round shaft Ø 1.1 mm x length 45mm / 30mm
005-0210-215 Drill bit – round shaft Ø 1.5 mm x length 70mm / 30mm
005-0210-219 Drill bit – round shaft Ø 2.0 mm x length 85mm / 70mm
005-0210-226 Drill bit – round shaft Ø 2.7 mm x length 85mm / 70mm
6
INSTRUMENTS FOR MINI FRAGMENT SYSTEM
005-0212-020 Drill guide 2.0mm within 3/1 hole used for Ø 2.0 mm drill bit and K-wire Ø 2.0 mm
005-0212-017 Double drill sleeve used for Ø 2.0 mm / Ø 2.7 mm drill bits
005-0212-021 Universal drill guide 2.7 mm / 2.0 mm used for tap Ø 2.7 mm drill bit and K-wire Ø 2.0 mm applicable for neutral load and compression position
005-0212-026 Tap sleeve Ø 3.5 mm, also use as Ø 3.5 mm drill guide
005-0219-003 Depth gauge used for Ø 1.5 mm up to Ø 2.0 mm screws
005-0219-004 Depth gauge used for Ø 2.7 mm up to Ø 4.0 mm screws
005-0219-039 Sharp - hook
005-0219-097 Screw holding forceps
7
INSTRUMENTS FOR MINI FRAGMENT SYSTEM
005-0229-001 Bending iron for mini and finger plates
005-0229-004 Bending iron for 3.5 mm / 2.7 mm plates
005-0229-005 Bending iron for 2.7 mm / 3.5 mm plates
009-0390-025 Small hex. screw driver with self-holding sleeve (hex. flats 2.5 mm) used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws
009-0390-015 Mini hex. screw driver with self-holding sleeve (hex. flats 1.5 mm) used for Ø 1.5 mm/Ø 2.0 mm screws
009-0390-052 Self-holding sleeve
009-0368-025 Small hex. screw driver for self-holding sleeve (hex. flats 2.5 mm) used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws
009-0390-060 Coupling self-holding sleeve for screw driver REF. 009-0368-025
8
INSTRUMENTS FOR MINI FRAGMENT SYSTEM
010-0020-350 Small hohmann retractor 6 mm
010-0020-352 Small hohmann retractor 8 mm
010-0020-354 Small hohmann retractor with broad shank
010-0020-800 Periosteal elevator, extra small, curved blade and straight edge, width 3 mm
010-0020-802 Periosteal elevator, small, curved blade and straight edge, width 6 mm
005-0717-012 Holding forceps 12 cm
010-0020-090 Reduction forceps with points, length 135 mm
010-0020-088 Reposition forceps curved with ratchet fixation, one point tip, length 135 mm
9
010-0020-050 Verbrügge bone holding forceps, length 175 mm
INS-8207-00 Inge 16.0 cm
INSTRUMENTS FOR MINI FRAGMENT SYSTEM
010-0020-092 Reposition forceps curved with ratchet fixation, length 145 mm
010-0020-070 Self-centering bone holding forceps, length 150 mm
INS-8205-10 Scarf bone holding forceps
10
005-0229-015 Bending pliers for 2.4 mm up to 4.0 mm plates, length 23.0 cm
005-0229-016 Bending pliers for 1.0 mm up to 2.0 mm plates, length 20.0 cm
005-0229-010 Wire bending pliers
004-1000-012 TC-wire cutter 180 mm used for soft wire Ø 2.0 mm - hard wire Ø 1.5 mm
004-1000-014 TC-wire cutter 220mm used for soft wire Ø 3.0 mm - hard wire Ø 2.5 mm
INSTRUMENTS FOR MINI FRAGMENT SYSTEM
005-0229-070 Bending bolt for K-wires Ø 0.8 mm up to Ø 2.5 mm
11
004-0310-010 K-wire with single trocar point Ø 1.0 mm x length 150 mm, round end
004-0310-012 K-wire with single trocar point Ø 1.2 mm x length 150 mm, round end
004-0310-016 K-wire with single trocar point Ø 1.6 mm x length 150 mm, round end
004-0330-008 K-wire with single trocar point Ø 0.8 mm x length 70 mm, round end
004-0330-010 K-wire with single trocar point Ø 1.0 mm x length 70 mm, round end
INSTRUMENTS FOR MINI FRAGMENT SYSTEM
MIMI-LAMBOTTE OSTEOTOME
K-WIRES TROCAR WITH ROUND END
PROFILE
Trocar-Round
010-0020-401 Partsch mallet Ø 22 mm, weight 200g, length 19 cm
010-0020-751 Mini-Lambotte Osteotome width 3 mm, length 12.5 cm / 5”
010-0020-752 Mini-Lambotte Osteotome width 4 mm, length 12.5 cm / 5”
010-0020-753 Mini-Lambotte Osteotome width 6 mm, length 12.5 cm / 5”
010-0020-754 Mini-Lambotte Osteotome width 8 mm, length 12.5 cm / 5”
010-0020-755 Mini-Lambotte Osteotome width 10 mm, length 12.5 cm / 5”
010-0020-761 Mini-Lambotte Osteotome width 3 mm, length 17 cm / 6 ¼”
010-0020-762 Mini-Lambotte Osteotome width 4 mm, length 17 cm / 6 ¼”
010-0020-763 Mini-Lambotte Osteotome width 6 mm, length 17 cm / 6 ¼”
010-0020-764 Mini-Lambotte Osteotome width 8 mm, length 17 cm / 6 ¼”
010-0020-765 Mini-Lambotte Osteotome width 10 mm, length 17 cm / 6 ¼”
12
Ref. No. Diameter and complete Length001-0001-006 Ø 1.5 mm x length 6 mm
001-0001-007 Ø 1.5 mm x length 7 mm
001-0001-008 Ø 1.5 mm x length 8 mm
001-0001-009 Ø 1.5 mm x length 9 mm
001-0001-010 Ø 1.5 mm x length 10 mm
001-0001-011 Ø 1.5 mm x length 11 mm
001-0001-012 Ø 1.5 mm x length 12 mm
001-0001-014 Ø 1.5 mm x length 14 mm
001-0001-016 Ø 1.5 mm x length 16 mm
001-0001-018 Ø 1.5 mm x length 18 mm
001-0001-020 Ø 1.5 mm x length 20 mm
Ref. No. Diameter and complete Length001-0001-006S Ø 1.5 mm x length 6 mm
001-0001-007S Ø 1.5 mm x length 7 mm
001-0001-008S Ø 1.5 mm x length 8 mm
001-0001-009S Ø 1.5 mm x length 9 mm
001-0001-010S Ø 1.5 mm x length 10 mm
001-0001-011S Ø 1.5 mm x length 11 mm
001-0001-012S Ø 1.5 mm x length 12 mm
001-0001-014S Ø 1.5 mm x length 14 mm
001-0001-016S Ø 1.5 mm x length 16 mm
001-0001-018S Ø 1.5 mm x length 18 mm
001-0001-020S Ø 1.5 mm x length 20 mm
STAINLESS STEEL MINI FRAGMENT DIA. 1.5 MM CORTICAL SCREW IMPLANTS
STAINLESS STEEL MINI FRAGMENT DIA. 1.5 MM CORTICAL SCREW IMPLANTS,SELF-TAPPING
Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 1.5 mm Important Technical Dimensions:Head Diameter Ø 3.0 mmHexagonal Socket width 1.5 mmCore Diameter for cortical Thread Ø 1.0 mmThread Diameter Ø 1.5 mmThread Pitch 0.5 mmApplicable Drill Bit for gliding Hole Ø 1.5 mm Applicable Drill Bit for Thread Hole Ø 1.1 mmUsed Tap Ø 1.5 mm Material: Stainless Steel
Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 1.5 mm Important Technical Dimensions:Head Diameter Ø 3.0 mmHexagonal Socket width 1.5 mmCore Diameter for cortical Thread Ø 1.0 mmThread Diameter Ø 1.5 mmThread Pitch 0.5 mmApplicable Drill Bit for gliding Hole Ø 1.5 mm Applicable Drill Bit for Thread Hole Ø 1.1 mmNote: tapping is not applicable!Material: Stainless Steel
MINI FRAGMENT DIA. 1.5 MM SCREWS
13
Ref. No. Diameter and complete Length001-0002-006 Ø 2.0 mm x length 6 mm
001-0002-008 Ø 2.0 mm x length 8 mm
001-0002-010 Ø 2.0 mm x length 10 mm
001-0002-012 Ø 2.0 mm x length 12 mm
001-0002-014 Ø 2.0 mm x length 14 mm
001-0002-016 Ø 2.0 mm x length 16 mm
001-0002-018 Ø 2.0 mm x length 18 mm
001-0002-020 Ø 2.0 mm x length 20 mm
001-0002-022 Ø 2.0 mm x length 22 mm
001-0002-024 Ø 2.0 mm x length 24 mm
001-0002-026 Ø 2.0 mm x length 26 mm
001-0002-028 Ø 2.0 mm x length 28 mm
001-0002-030 Ø 2.0 mm x length 30 mm
001-0002-032 Ø 2.0 mm x length 32 mm
001-0002-034 Ø 2.0 mm x length 34 mm
001-0002-036 Ø 2.0 mm x length 36 mm
001-0002-038 Ø 2.0 mm x length 38 mm
Ref. No. Diameter and complete Length001-0002-006S Ø 2.0 mm x length 6 mm
001-0002-008S Ø 2.0 mm x length 8 mm
001-0002-010S Ø 2.0 mm x length 10 mm
001-0002-012S Ø 2.0 mm x length 12 mm
001-0002-014S Ø 2.0 mm x length 14 mm
001-0002-016S Ø 2.0 mm x length 16 mm
001-0002-018S Ø 2.0 mm x length 18 mm
001-0002-020S Ø 2.0 mm x length 20 mm
001-0002-022S Ø 2.0 mm x length 22 mm
001-0002-024S Ø 2.0 mm x length 24 mm
001-0002-026S Ø 2.0 mm x length 26 mm
001-0002-028S Ø 2.0 mm x length 28 mm
001-0002-030S Ø 2.0 mm x length 30 mm
001-0002-032S Ø 2.0 mm x length 32 mm
001-0002-034S Ø 2.0 mm x length 34 mm
001-0002-036S Ø 2.0 mm x length 36 mm
001-0002-038S Ø 2.0 mm x length 38 mm
STAINLESS STEEL MINI FRAGMENT DIA. 2.0 MM CORTICAL SCREW IMPLANTS
STAINLESS STEEL MINI FRAGMENT DIA. 2.0 MM CORTICAL SCREW IMPLANTS, SELF-TAPPING
Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 2.0 mm Important Technical Dimensions:Head Diameter Ø 4.0 mmHexagonal Socket width 1.5 mmCore Diameter for cortical Thread Ø 1.3 mmThread Diameter Ø 2.0 mmThread Pitch 0.6 mmApplicable Drill Bit for gliding Hole Ø 2.0 mm Applicable Drill Bit for Thread Hole Ø 1.5 mmUsed Tap Ø 2.0 mm Material: Stainless Steel
Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 2.0 mm Important Technical Dimensions:Head Diameter Ø 4.0 mmHexagonal Socket width 1.5 mmCore Diameter for cortical Thread Ø 1.3 mmThread Diameter Ø 2.0 mmThread Pitch 0.6 mmApplicable Drill Bit for gliding Hole Ø 2.0 mm Applicable Drill Bit for Thread Hole Ø 1.5 mmNote: tapping is not applicable!Material: Stainless Steel
MINI FRAGMENT DIA. 2.0 MM SCREWS
14
Ref. No. Diameter and complete Length001-0003-006 Ø 2.7 mm x length 6 mm
001-0003-008 Ø 2.7 mm x length 8 mm
001-0003-010 Ø 2.7 mm x length 10 mm
001-0003-012 Ø 2.7 mm x length 12 mm
001-0003-014 Ø 2.7 mm x length 14 mm
001-0003-016 Ø 2.7 mm x length 16 mm
001-0003-018 Ø 2.7 mm x length 18 mm
001-0003-020 Ø 2.7 mm x length 20 mm
001-0003-022 Ø 2.7 mm x length 22 mm
001-0003-024 Ø 2.7 mm x length 24 mm
001-0003-026 Ø 2.7 mm x length 26 mm
001-0003-028 Ø 2.7 mm x length 28 mm
001-0003-030 Ø 2.7 mm x length 30 mm
001-0003-032 Ø 2.7 mm x length 32 mm
001-0003-034 Ø 2.7 mm x length 34 mm
001-0003-036 Ø 2.7 mm x length 36 mm
001-0003-038 Ø 2.7 mm x length 38 mm
001-0003-040 Ø 2.7 mm x length 40 mm
001-0003-042 Ø 2.7 mm x length 42 mm
001-0003-045 Ø 2.7 mm x length 45 mm
001-0003-046 Ø 2.7 mm x length 46 mm
001-0003-048 Ø 2.7 mm x length 48 mm
001-0003-050 Ø 2.7 mm x length 50 mm
001-0003-055 Ø 2.7 mm x length 55 mm
001-0003-060 Ø 2.7 mm x length 60 mm
Ref. No. Diameter and complete Length001-0003-006S Ø 2.7 mm x length 6 mm
001-0003-008S Ø 2.7 mm x length 8 mm
001-0003-010S Ø 2.7 mm x length 10 mm
001-0003-012S Ø 2.7 mm x length 12 mm
001-0003-014S Ø 2.7 mm x length 14 mm
001-0003-016S Ø 2.7 mm x length 16 mm
001-0003-018S Ø 2.7 mm x length 18 mm
001-0003-020S Ø 2.7 mm x length 20 mm
001-0003-022S Ø 2.7 mm x length 22 mm
001-0003-024S Ø 2.7 mm x length 24 mm
001-0003-026S Ø 2.7 mm x length 26 mm
001-0003-028S Ø 2.7 mm x length 28 mm
001-0003-030S Ø 2.7 mm x length 30 mm
001-0003-032S Ø 2.7 mm x length 32 mm
001-0003-034S Ø 2.7 mm x length 34 mm
001-0003-036S Ø 2.7 mm x length 36 mm
001-0003-038S Ø 2.7 mm x length 38 mm
001-0003-040S Ø 2.7 mm x length 40 mm
001-0003-042S Ø 2.7 mm x length 42 mm
001-0003-045S Ø 2.7 mm x length 45 mm
001-0003-046S Ø 2.7 mm x length 46 mm
001-0003-048S Ø 2.7 mm x length 48 mm
001-0003-050S Ø 2.7 mm x length 50 mm
001-0003-055S Ø 2.7 mm x length 55 mm
001-0003-060S Ø 2.7 mm x length 60 mm
STAINLESS STEEL MINI FRAGMENT DIA. 2.7 MM CORTICAL SCREW IMPLANTS
STAINLESS STEEL MINI FRAGMENT DIA. 2.7 MM CORTICAL SCREW IMPLANTS, SELF-TAPPING
Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 2.7 mm Important Technical Dimensions:Head Diameter Ø 5.0 mmHexagonal Socket width 2.5 mmCore Diameter for cortical Thread Ø 1.9 mmThread Diameter Ø 2.7 mmThread Pitch 1.0 mmApplicable Drill Bit for gliding Hole Ø 2.7 mm Applicable Drill Bit for Thread Hole Ø 2.0 mmUsed Tap Ø 2.7 mm Material: Stainless Steel
Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 2.7 mm Important Technical Dimensions:Head Diameter Ø 5.0 mmHexagonal Socket width 2.5 mmCore Diameter for cortical Thread Ø 1.9 mmThread Diameter Ø 2.7 mmThread Pitch 1.0 mmApplicable Drill Bit for gliding Hole Ø 2.7 mm Applicable Drill Bit for Thread Hole Ø 2.0 mmNote: tapping is not applicable!Material: Stainless Steel
MINI FRAGMENT DIA. 2.7 MM SCREWS
001-0013-001 Washer for Ø 2.7 mm screws
15
MINI FRAGMENT 1.5 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 1.5 MMMini H-Plate 1.5 mm with oval Holes used with Ø1.5 mm steel cortical screws Mainly applicable for Re-Implantation of transversely amputated Fingers Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 9.0 mm x 8.2 mmDistance Hole / 5.0 mm x 4.2 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini H- Plate 1.5 mm
Ref. No. Complete Length and Holes002-0049-009 length 9.0 mm x 4 hole
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 1.5 MMMini T-Plates 1.5 mm with oval Holes used with Ø 1.5 mm steel cortical screws Mainly applicable in the distal or proximal ends phalanges Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 3.8 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plate 1.5 mm
Ref. No. Complete Length and Holes002-0049-003 length 50 mm x 9 hole in shaft + 3 hole in head
002-0049-004 length 50 mm x 9 hole in shaft + 4 hole in head
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 1.5 MMStraight Mini Plate 1.5 mm with oval Holes used with Ø 1.5 mm steel cortical screws Mainly applicable in phalangeal Fractures Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 3.8 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plate 1.5 mm
Ref. No. Complete Length and Holes002-0049-001 Length 100 mm x 20 Hole
16
MINI FRAGMENT 1.5 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 1.5 MM
Mini Condylar Plate 1.5 mm with oval Holes used with Ø 1.5 mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 3.8 mmDistance Hole / Shaft 5.0 mmPin Length 14 mm x Pin width 2.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Condylar Plate 1.5 mm
Ref. No. Complete Length and Holes Ref. No. Complete Length and Holes002-0049-010L length 26 mm x 6 hole LEFT 002-0049-010R length 26 mm x 6 hole RIGHT
17
MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI ADAPTION PLATE 2.0 MM
Straight Mini Adaption Plate 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable as a Reconstruction Finger Plate Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plate 2.0 mm
Ref. No. Complete Length and Holes002-0062-014 length 100 mm x 20 hole
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MMStraight Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in Hand and - Foot Fractures Important technical Dimensions:Thickness 1.0 mm Broad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.0 mm
Ref. No. Complete Length and Holes002-0061-022 length 22 mm x 4 hole
002-0061-027 length 27 mm x 5 hole
002-0061-032 length 32 mm x 6 hole
002-0061-037 length 37 mm x 7 hole
002-0061-042 length 42 mm x 8 hole
18
MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MMStraight Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in Hand and – Foot Fractures Important technical Dimensions:Thickness 1.5 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.0 mmRef. No. Complete Length and Holes002-0063-032 length 32 mm x 6 hole
002-0063-037 length 37 mm x 7 hole
002-0063-042 length 42 mm x 8 hole
002-0063-047 length 47 mm x 9 hole
002-0063-052 length 52 mm x 10 hole
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MMStraight Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable for diaphyseal Fractures of the Phalanges Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.0 mm
Ref. No. Complete Length and Holes002-0074-017 length 17 mm x 3 hole
002-0074-023 length 23 mm x 4 hole
002-0074-029 length 29 mm x 5 hole
002-0074-035 length 35 mm x 6 hole
19
MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.0 MMStraight Low Touch Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable for diaphyseal Fractures of the Phalanges Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 4.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Low Touch Mini Plates 2.0 mm
Ref. No. Complete Length and Holes002-0069-023 length 23 mm x 4 hole
002-0069-029 length 29 mm x 5 hole
002-0069-035 length 35 mm x 6 hole
002-0069-041 length 41 mm x 7 hole
002-0069-047 length 47 mm x 8 hole
002-0069-053 length 53 mm x 9 hole
002-0069-059 length 59 mm x 10 hole
002-0069-119 length 119 mm x 20 hole
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 2.0 MMStraight Mini Plate 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in phalangeal Fractures Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plate 2.0 mm
Ref. No. Complete Length and Holes002-0062-015 length 100 mm x 20 hole
20
MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MMMini T-Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plates 2.0 mm
Ref. No. Complete Length and Holes002-0065-007 length 18 mm x 2 hole in shaft + 2 hole in head
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, 90° ANGLEDMini L-Plates 2.0 mm, 90° Angled with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plates 2.0 mm, 90° Angled
Ref. No. Complete Length and Holes002-0065-005 length 18 mm x 2 hole in shaft + 2 hole in head, 90° RIGHT
002-0065-004 length 18 mm x 2 hole in shaft + 2 hole in head, 90° LEFT
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, OBLIQUE ANGLEDMini L-Plates 2.0 mm, Oblique Angled with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plates 2.0 mm, Oblique Angled
Ref. No. Complete Length and Holes002-0065-002 length 20 mm x 2 hole in shaft + 2 hole in head, Oblique RIGHT
002-0065-001 length 20 mm x 2 hole in shaft + 2 hole in head, Oblique LEFT
21
MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MMMini T-Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends phalanges Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plates 2.0 mm
Ref. No. Complete Length and Holes002-0062-005 length 50 mm x 9 hole in shaft + 3 hole in head
002-0062-010 length 50 mm x 9 hole in shaft + 4 hole in head
STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 2.0 MMMini H-Plate 2.0 mm with oval Holes used with Ø2.0 mm steel cortical screws Mainly applicable for Re -Implantation of transversely amputated Fingers Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 11.0 mm x 12.0 mmDistance Hole / 7.0 mm x 6.0mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini H-Plate 2.0 mm
Ref. No. Complete Length and Holes002-0065-010 length 12.0 mm x 4 hole
22
MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.0 MMMini Condylar Plate 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmPin Length 14 mm x Pin width 2.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Condylar Plate 2.0 mm
Ref. No. Complete Length and Holes Ref. No. Complete Length and Holes002-0065-015L length 29 mm x 6 hole LEFT 002-0065-015R length 29 mm x 6 hole RIGHT
23
MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.7 MMStraight Mini Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures Important technical Dimensions:Thickness 2- 6 ( hole ) 2.0 mmThickness 7-12 ( hole ) 2.5 mmBroad / Shaft 8.0 mmDistance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0 mm except for 002-0072-020-L=16.8 mm Material: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.7 mm
Ref. No. Complete Length and Holes002-0072-020 length 20 mm x 2 hole
002-0072-020-L length 26 mm x 2 hole
002-0072-028 length 28 mm x 3 hole
002-0072-036 length 36 mm x 4 hole
002-0072-044 length 44 mm x 5 hole
002-0072-052 length 52 mm x 6 hole
002-0072-060 length 60 mm x 7 hole
002-0072-068 length 68 mm x 8 hole
002-0072-076 length 76 mm x 9 hole
002-0072-084 length 84 mm x 10 hole
002-0072-092 length 92 mm x 11 hole
002-0072-100 length 100 mm x 12 hole
002-0072-108 length 108 mm x 13 hole
002-0072-116 length 116 mm x 14 hole
24
STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.7 MMStraight Low Touch Mini Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures Important technical Dimensions:Thickness 2- 6 ( hole ) 2.0 mmThickness 7-12 ( hole ) 2.5 mmBroad / Shaft 8.0 mmDistance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0 mm Material: Stainless SteelProduct Description:Stainless Steel Straight Low Touch Mini Plates 2.7 mm
Ref. No. Complete Length and Holes002-0073-020 length 20 mm x 2 hole
002-0073-028 length 28 mm x 3 hole
002-0073-036 length 36 mm x 4 hole
002-0073-044 length 44 mm x 5 hole
002-0073-052 length 52 mm x 6 hole
002-0073-060 length 60 mm x 7 hole
002-0073-068 length 68 mm x 8 hole
002-0073-076 length 76 mm x 9 hole
002-0073-084 length 84 mm x 10 hole
002-0073-092 length 92 mm x 11 hole
002-0073-100 length 100 mm x 12 hole
MINI FRAGMENT 2.7 MM PLATES
25
MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT QUARTER TUBULAR MINI PLATES 2.7 MMQuarter Tubular Mini Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable as tension band Plates in Fractures of metacarpal and metatarsal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 78.0 mmDistance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0 mm Material: Stainless SteelProduct Description:Stainless Steel Quarter Tubular Mini Plates 2.7 mm
Ref. No. Complete Length and Holes002-0014-023 length 23 mm x 3 hole
002-0014-031 length 31 mm x 4 hole
002-0014-039 length 39 mm x 5 hole
002-0014-047 length 47 mm x 6 hole
002-0014-055 length 55 mm x 7 hole
002-0014-063 length 63 mm x 8 hole
002-0014-071 length 71 mm x 9 hole
002-0014-079 length 79 mm x 10 hole
26
MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.7 MM
Mini Condylar Plate 2.7 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions:Thickness 1.5 mmBroad / Shaft 7.0 mmDistance Hole / Shaft 8.0 mmPin Length 20 mm x Pin width 2.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Condylar Plate 2.7 mm
Ref. No. Complete Length and Holes Ref. No. Complete Length and Holes002-0060-025L length 55 mm x 6 hole LEFT 002-0060-025R length 55 mm x 6 hole RIGHT
27
MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI MULTIFRAGMENT PLATE 2.7 MMMini Multifragment Plate 2.7 mm with round Holes used with Ø 2.7 mm steel cortical screws Mainly applicable for metacarpal and metatarsal Fractures Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 14.5 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Multifragment Plate 2.7 mm
Ref. No. Complete Length and Holes002-0060-010 length 44.5 mm x 7 hole
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.7 MMMini T-Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 7.0 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plates 2.7 mm
Ref. No. Complete Length and Holes002-0060-007 length 32 mm x 3 hole in shaft + 2 hole in head
002-0060-008 length 40 mm x 4 hole in shaft + 2 hole in head
002-0060-009 length 48 mm x 5 hole in shaft + 2 hole in head
002-0060-010 length 56 mm x 6 hole in shaft + 2 hole in head
002-0060-011 length 64 mm x 7 hole in shaft + 2 hole in head
002-0060-012 length 72 mm x 8 hole in shaft + 2 hole in head
28
MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, 90° ANGLEDMini L-Plates 2.7 mm, 90° Angled with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 7.0 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plate 2.7 mm, 90° Angled
Ref. No. Complete Length and Holes002-0060-002 length 32 mm x 3 hole in shaft + 2 hole in head, 90° RIGHT
002-0060-001 length 32 mm x 3 hole in shaft + 2 hole in head, 90° LEFT
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, OBLIQUE ANGLEDMini L-Plates 2.7 mm, Oblique Angled with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 7.2 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plates 2.7 mm, Oblique Angled
Ref. No. Complete Length and Holes002-0060-005 length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique RIGHT
002-0060-004 length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique LEFT
29
Notes
Rev. 29.08.2016mahe medical GmbH | Friedrich-Wöhler-Strasse 10 | 78576 Emmingen-Liptingen | Germany Phone +49 7465 9275-0 | Fax +49 7465 9275-29 | www.mahe-med.de