requirements of good formwork
DESCRIPTION
- A good formwork should satisfy the following requirements 1. Easy removal 2. Strength 3. Rigidity 4. Less leakage 5. smooth surface 6. Light weight 7. Quality 8. supports 9. EconomyTRANSCRIPT
![Page 1: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/1.jpg)
REQUIREMENTS OF GOOD FORMWORK
![Page 2: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/2.jpg)
A good formwork should satisfy the following requirements1. Easy removal
2. Economy
3. Strength
4. Rigidity
5. Less leakage
6. smooth surface
7. Light weight
8. Quality
9. supports
![Page 3: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/3.jpg)
1. Easy removal
The design of formwork should be such that it
can be removed easily with least amount of
hammering.
The removal of formwork should cause least
injury to the surface or edges of the concrete.
![Page 4: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/4.jpg)
2. Economy
As the formwork does not contribute anything
to the stability of the finished structure, it
should therefore, be made economical by
reducing the cost through proper design and
construction.
![Page 5: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/5.jpg)
3. Strength
The formwork should be strong enough to
withstand all loads coming on it, such as dead
load of concrete. and live load during its
pouring. compaction and curing.
The loads on formwork should be estimated
carefully. The over-estimation of loads result in
expensive formwork and the under estimation of
loads results in the failure of formwork.
![Page 6: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/6.jpg)
4. Rigidity
The formwork should rigid (stiff) enough so that
deflection is minimum.
for visible surface in completed the work. the
deflection limited to 1/300 of span and for
hidden surface. It is limited 1/150 of span. It
should be noted that a rigid formwork will be
robust and stiff enough to allow repeated use.
![Page 7: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/7.jpg)
5. Less leakage
The formwork should be so arranged that
there is minimum of leakage through the
joints. This is achieved providing tight joints
between adjacent sections of the formwork.
![Page 8: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/8.jpg)
6. smooth surface
The surface of the formwork should be
smooth, and it should afford easy stripping
This is achieved by applying crude oil or soft
soap solution to the inside surface of
formwork.
![Page 9: Requirements of good formwork](https://reader037.vdocuments.net/reader037/viewer/2022100416/55944f9f1a28ab0f198b46a2/html5/thumbnails/9.jpg)