residential tile & stone installation systems€¦ · installations of tile and stone over...

Interior Exterior Swimming Pools Residential

Residential Tile & Stone Installation Systems

Snap for more information.

Photo credit: Private residence bathroom | The Orchid Group

2 | R e s i d en t i a l T i l e & S t one I n s t a l l a t i o n S y s t ems | www. l a t i c r e t e . c om .au

The LATICRETE products in this brochure are recommended for residential installations of tile and stone.

An overview of each recommended LATICRETE product is provided as a general guide to facilitate the selection of the appropriate LATICRETE setting product for the specific application.

Refer to www.laticrete.com.au for installation charts, product application videos, Architectural Specifications, Architectural Details and comprehensive technical support. Provided that tile or stone are installed in accordance with applicable industry standards and written LATICRETE installation instructions, projects utilising LATICRETE products can qualify for a comprehensive LATICRETE System Warranty.

LATICRETE Lifetime Residential System WarrantyAPPLICATION PRODUCTS

Underlayment NXT® Level PlusNXT Primer

Waterproofing/ Anti-Fracture

HYDRO BAN®

9235 Waterproofing Membrane

Sound Control/ Anti-Fracture

125 Sound & Crack AdhesiveLATICRETE Sound Control Mat

Uncoupling Membrane STRATA_MAT™

Thick Bed Mortar 3701 Fortified Mortar Bed3701 Mortar Admix mixed with n 226 Thick Bed Mortar

Slurry Bond Coat 4237 Latex Additive mixed withn 211 Crete Filler Powder3701 Mortar Admix mixed withn 315 Super Floor & Wall Thin-Set Adhesive

Thin Bed Method LATAPOXY® 300 Adhesive345 Platinum4-XLT4237 Latex Additive mixed withn 211 Crete Filler Powder4237 Latex Additive mixed withn 315 Super Floor & Wall Adhesive (previously 290 Super Floor & Wall

Thin-Set Adhesive)

Grout SPECTRALOCK® PRO Grout*PERMACOLOR® Grout (façades only)PERMACOLOR Select (façades only)

Sealant LATASIL™ and LATASIL 9118 Primer where required


Concrete

345 Platinum

SPECTRALOCK PRO Grout

First coat of HYDRO BAN

Second coat of HYDRO BAN

SYSTEM APPLICATION:

Waterproofing MembraneHYDRO BAN®

See Data Sheet DS-1036 for complete product information.

HYDRO BAN® is a thin waterproofing and anti-fracture membrane that combines optimum performance and unmatched productivity. Our new improved formula is rapid drying allowing for a faster time to tile and flood test after

final cure, as well as faster flood testing in cold temperatures and over mortar beds. Backed by the LATICRETE System Warranty^. HYDRO BAN does not require the use of fabric in the field, coves or corners and bonds directly to drains and pipe penetrations. Save yourself time and money, and complete your installations faster with greater ease.

Mortar Bed3701 Fortified Mortar BedSee Data Sheet DS-1000 for complete product information.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, Portland cement and

graded aggregates. 3701 Fortified Mortar Bed does not require the use of latex admix, you only need to add water to produce thick bed mortar with exceptional strength.

Uncoupling MatSTRATA_MAT™


STRATA_MAT™ is a next generation high performance uncoupling mat for use under tile and stone installations for both residential and commercial applications. Designed to replace traditional underlayment materials. Engineered to allow safe, reliable installations of tile and stone over “problematic” surfaces such as

wood, cracked concrete, post and pre tensioned concrete.

Adhesives345 PlatinumSee Data Sheet DS-1166 for complete product information.

345 Platinum is the ultimate one-step, polymer fortified, thin-set adhesive for pools, interior and exterior

installation of ceramic and stone tile, reduced thickness porcelain, quarry tile, pavers and thin brick. 345 Platinum provides long open time with unsurpassed adhesion and workability. Suitable for immersed installations.

125 Sound & Crack AdhesiveSee Data Sheet DS-1045 for complete product information.

125 Sound & Crack Adhesive is a superior crack prevention and sound isolation adhesive. Independently

tested to ANSI A118.12 specification for crack isolation for ceramic tile and stone installations and independently tested to ASTM E2179 and ASTM E492 for impact sound isolation.

4-XLTSee Data Sheet DS-1035 for complete product information.

4-XLT is a multi-use, polymer fortified adhesive mortar. 4-XLT offers tremendous utility including non-sag wall

installations, medium bed build-up of up to 19 mm and thin-set applications of floors.

GroutsSPECTRALOCK® PRO Grout*See Data Sheet DS-1039 for complete product information.

SPECTRALOCK® PRO Grout* can be used on both floors and walls. Stain resistant, easy to install and it never

needs sealing. Highly recommended for use in swimming pools where greater chemical resistance is sought.

PERMACOLOR® GroutSee Data Sheet DS-1041 for complete product information.

PERMACOLOR Grout offers the maximum performance available in a cement-based grout, providing consistent

colour and antimicrobial protection to resist stain-causing mould and mildew. PERMACOLOR Grout is easy to install – just mix with water. PERMACOLOR Grout is ideal for floors and walls in both interior and exterior installations. When you must use a cement-based grout, choose PERMACOLOR Grout.

Sealant LATASIL™


LATASIL™ sealant is a high performance, one component, neutral cure, 100% silicone sealant designed for ceramic tile and stone applications.


Refer to Data Sheet: DS-031.0

Refer to Data Sheet: DS--032.0

Refer to Data Sheet: DS--033.0

HYDRO BAN® Linear Pre-Sloped Shower PanHYDRO BAN® Linear Pre-Sloped Shower Pan is a component of the expanded HYDRO BAN line of products that allow for high quality rapid shower installations. Constructed of lightweight high-density expanded polystyrene, the HYDRO BAN Linear Pre-Sloped Shower Pan allows for the combination of HYDRO BAN Linear Drains and Pre-Sloped Shower Pans, the HYDRO BAN Linear Pre-Sloped Shower Pan is 100% waterproof, and ready-to-tile. The HYDRO BAN Linear Drains are sold separately with Wedge Wire, Punched and Tile Insert Grates in Satin Finished Stainless Steel versions to enhance the shower design. Special order item. Contact us for more information.

n Pre-sloped ready to tile pan eliminates need for traditional mud bed installations n Lightweight and durable, easy to transport and handle during installation n Factory installed, code approved waterproofing meets ANSI A118.10 requirements n The length can quickly and easily be modified to size on site n Code approved; meets IAPMO-PS- 106 n Works in conjunction with LATICRETE tile and stone installation materials

HYDRO BAN® Linear Drains are sold separately with Wedge Wire, Punched and Tile Insert Grates in Satin Finished Stainless

Steel versions to enhance the shower design.

Sizes

Centre Drain

900 mm x 1500 mm

900 mm x 1200 mm

1200 mm x 1500 mm

1200 mm x 1200 mm

Off Centre Drain 960 mm x 1670 mm

HYDRO BAN Preformed SeatHYDRO BAN Preformed Seat is a components of the expanded HYDRO BAN line of waterproof products that allow for high quality rapid shower installations. HYDRO BAN Preformed Seat is made from high-density expanded polystyrene with a waterproof finish. The HYDRO BAN Preformed Seat is 100% waterproof and ready-to-tile.

n Lightweight, high strength expanded polystyrenen Simple and easy to installn Ready-to-tile, waterproof surface

AVAILABLE SIZESn 41 cm x 41 cm trianglen 58 cm x 58 cm trianglen 41 cm x 41 cm convex * All HYDRO BAN Preformed Seats are 51 cm high.

HYDRO BAN Preformed NicheHYDRO BAN Preformed Niche is a component of the expanded HYDRO BAN line of waterproof products that allow for high quality rapid shower installations. HYDRO BAN Preformed Niche is constructed of lightweight high-density expanded polystyrene with a waterproof finish and is ready to tile.

n Lightweight, high strength expanded polystyrenen Simple and easy to installn Ready-to-tile, waterproof surfacen Ideal for bathrooms, kitchens

AVAILABLE SIZESn 30 cm x 30 cm squaren 30 cm x 30 cm and 30 cm x 15 cm wide combon 20 cm x 30 cm and 20 cm x 15 cm narrow combon 15 cm x 51 cm megan 20 cm x 20 cm soap niche




HYDRO BAN Preformed BenchHYDRO BAN Preformed Bench is a component of the expanded HYDRO BAN line of waterproofing products that allow for high quality rapid shower installations. The HYDRO BAN Preformed Bench is made from high-density expanded polystyrene with a waterproof finish. The HYDRO BAN Preformed Benches are 100% waterproof and ready-to-tile.

Can be installed anywhere a tiled bench is needed. Lightweight, simple and easy to install. Special order item. Contact us for more information.

AVAILABLE SIZES:

n 29 cm x 29 cm square n 89 cm x 29 cm rectangle* All HYDRO BAN Preformed Benches are 51 cm in high.

HYDRO BAN Preformed ShelfHYDRO BAN Preformed Shelf is a component of the expanded HYDRO BAN line of waterproof products that allow for high quality rapid shower installations. HYDRO BAN Preformed Shelf is constructed of lightweight high-density expanded polystyrene with a waterproof finish and is ready to tile.

Can be installed anywhere a tiled shelf is required. Lightweight simple and easy to install. Special order item. Contact us for more information.

AVAILABLE SIZES

n 18 cm x 18 cm triangle n 23 cm x 23 cm triangle n 28 cm x 28 cm triangle n 28 cm x 28 cm convex triangle *All HYDRO BAN Preformed Shelves are 5.8 cm thick.



HYDRO BAN® Shower DrainsHYDRO BAN® Shower Drains combine the quality of precision hand crafted stainless steel with unlimited design possibilities for your new shower floor. Part of a complete installation system, HYDRO BAN Shower Drains offer a waterproof assembly backed by a comprehensive available lifetime warranty!

HYDRO BAN Linear DrainsHYDRO BAN Linear Drains are available in a tile-in version providing a seamless continuous tiled floor appearance – virtually making the drain disappear and also available with an attractive satin polished punched or wedge wire grate. Special order item. Contact us for more information.

n Single slope to drainn Allows for use of large format tilen DN80 centre outlets standardn Tile in grate available to match floor tilen Eliminates pre-slope and primary shower pan for a faster installationn Made from heavy duty 316 stainless steel provides for long lasting performancen HYDRO BAN waterproofing membrane bonds directly to stainless steel flange edge allowing for faster, easier installation

HYDRO BAN Linear Drain Sizes90 mm x 900 mm90 mm x 1000 mm90 mm x 1200 mm90 mm x 1500 mm

(Custom lengths on application)

Tile-In Drain Polished Stainless Steel Drain

CHOOSE FROM 2 LINEAR DRAIN STYLES

HYDRO BAN custom linear drains6 weeks lead time for orders

HYDRO BAN side outlet linear drain 4 weeks lead time for special orders


HYDRO BAN Bonding Flange DrainsHYDRO BAN Bonding Flange Drain consists of a PVC or ABS Flange body, adjusting ring and a stainless steel drain assembly. Offered in either an exclusive tile-in version to provide enhanced design options or a polished, brushed or oil rubbed bonze finish grate design. Each 127 mm x 127 mm square drain integrates with the HYDRO BAN Bonding flange assembly, allowing for easy connection to 51 mm, 76 mm or 101 mm outlets with no adaptors needed. Special order item. Contact us for more information.

n Exclusive tile-in grate option provides for a seamless appearance, making the drain seem to disappear!n Polished, brushed or oil rubbed bronze drain grates are constructed of heavy duty 304 stainless steel to resist wear

and scratchingn Bonding flange body are available in PVC or ABSn Adjusts both vertically and laterally for easy installationn Suitable for wide range of tile thicknesses from 6 mm – 38 mm depending on grate designn Watermark Certifiedn Compatible with LATICRETE mortar bed and HYDRO BAN waterproofing membrane providing a complete waterproof

assembly and easy installation

PACKAGING Available in PVC or ABS Bonding Flange assembles with your choice of Brushed, Polished or Oil Rubbed Bronze Stainless Steel and a Tile-In version to enhance the design options.


n CSIRO Australian Board of Standards and Appeals, New York Cityn Campden Food Research Corporation, United Kingdomn Ceramic Tile Institute of American CSTB, Francen Department of Building and Safety, City of Los Angelesn EMPA Swiss Federal Institute of Building Researchn GREENGUARD Certificationn International Association of Plumbing and Mechanical Officials

(#3524)

n International Conference of Building Officialsn Lloyd’s Register of Shippingn London Undergroundn Ministry of Public Works, Englandn Ministry of Defense, Englandn Underwriters Laboratories, Inc (Classified)

CERTIFICATIONLATICRETE materials are certified by independent laboratories throughout the world to meet or exceed applicable industry standards/norms; including DIN, ANSI, AS, UEAtc, JIS, ASTM, ABSAC, UPC®, ICC, IAPMO, and ISO.

In Addition, Approvals Include:

With a LATICRETE® System Warranty you will enjoy peace of mind with high quality, globally proven LATICRETE products. When selecting the installation system for your tile or stone project consider the value and peace of mind that LATICRETE experience, expertise and warranty will bring.

LATICRETE provides comprehensive warranties covering commercial, residential, and industrial projects around the world. However, our best guarantee is over 50 years of experience with industrial, commercial and residential installations in every imaginable climate around the world.

Consult LATICRETE for complete warranty information for your particular project.

Refer to the LATICRETE Warranty Data Sheet DS-1126 for additional information.

Many companies might say their products are low VOC, only one independently certifies it – LATICRETE.n UL GREENGUARD® Environment Certification, Certified to Meet

Stringent Indoor Air Quality Standardsn Certified to UL GREENGUARD Gold Standardsn Helps Contribute Toward LEED Certificationn Product Certifications Readily Available at www.laticrete.com/green

&

DS-1175-0715 ^ For more information please contact LATICRETE.* United States Patent No.: 6,881,768 (and other Patents).

GREENGUARD Indoor Air Quality is a registered trademark of the GREENGUARD Environmental Institute.

LATICRETE Pty Ltd29 Telford StreetVirginia, QLD 4014Australia1800 331 012

www.laticrete.com.au

©2015 LATICRETE Pty LtdAll trademarks shown are the intellectual properties of their respective owners.

Globally Proven Construction Solutions

residential tile & stone installation systems€¦ · installations of tile and stone over...

Documents