resume mark grey aug16
TRANSCRIPT
RESUME OF MARK GREY
Name Mark Harold Caird Grey (Buttons)
Address 1732 Bokal East Arthur Road, Arthur River WA 6315
Mobile Phone 0427 626 064
Email [email protected]
Occupation Rigger
Profile Perth point of hire. Australian passport holder.I am a safety conscious worker who follows instructions and procedures. My commitment to a job and level of attendance is a matter of record.With over 10 years of industrial construction projects for all the major iron ore players I am used to FI/FO work in the Pilbara and living in camp. I place a high value on working as part of a team, communication and preparation, I am capable of writing up a JSA/JHA and associated paper work and doing the prestarts required prior to commencing a job. I believe in talking through a job and getting the correct gear together that will be necessary for the job, doing the job while being flexiable as a team player. I am always learning and working on my skill set, with safety a key consideration.
Licences
Driver’s Licence - Western Australia lic no 3473362 expiry 17/1/2019
- HR (Heavy Rigid)- DTECH Defensive Four Wheel Driving Techniques (gravel roads) 2006
WorkSafe Licence To Perform High Risk Work - WL937505 expiry 27/11/2017
- LF - Forklift Truck- WP - Boom-type Elevated Work Platform- DG - Dogging - RB, RI, RA - Advanced Rigging
Safety Tickets
- Working Safely at Heights 2016- Working in Confined Spaces, AST. Issue date 4/12/10 cert no
CA57460- Construction Safety Awareness Training Card no 02273 issued
1/09/2006- Carry Out Basic Demolition. Construction Skills Training 11/8/2007
- Hot Work L2 For Workers, 2013
- Use Portable Fire Fighting Equipment, 2013
Other
First Aid Certificate – out of date Mine Employees Health Surveillance Card. H.S.N.19838, exp3/5/2015 MSIC card expires 27-June-2016 BHPBilliton BIO and Port inductions RIO Yandi-Coogina minesite induction. Samsung Roy Hill induction ,commissioning ,rail, and lockholders 1 VOCs BHPBIO, RIO, ROYHILL ,Rigging, EWP.
Safety Inductions
MARCSTA Induction Construction Safety Awareness Training Card Pilbara Iron HSE Induction Pilbara Iron Lock Holders Safety Course BHP BIO WORKING AT HEIGHTS GAP BHPBIO PORT INDUCTIONS LOCK HOLDERS. ROYHILL RAIL COMMISIONING LOCKHOLDERS ROYHILL MINE SITE INDUCTION AND LOCKHOLDERS
Trade skills
Rigging/Dogging lift experience in heavy industrial and mining industries
Experienced EWP operator. Mechanical aptitude extensive knowledge of most standard EWPs Extensive knowledge of construction and mining industry operations Excellent understanding of safe work practices Strong problem solving and communication skills Ability to work as a team member Ability to read drawings, bolt lists, operating manuals ect. Own tools Commitment to follow procedures write and sign JHAs, Permits, Take
5s, do prestart checks and fill in log books Ability to adhere to site and camp rules Experienced FI/FO worker
Employment History
Company: GREENSTONE HOSPITALITY GROUP
Date: 28th September 2016-10th January 2017
Site: Green Man Pub, Dylangers Bar and Brassiery, Leroys Dive Bar, Wellington,NZ.
Position: Project facilitator- bar redevelopement.
Key Responcibilities:
Facilitate bar redevelopement liase between builders, designer, project manager, materials procurement,Labouring, handyman, landscaper , painter, girl Friday.
References: Steve Drummond ph 64274881994 [email protected]
Company: GOODLINE
Date: 8th July-1 AUGUST 2016
Site: ROY HILL MINE
Position: Advanced Rigger
Key Responcibilities:
CHLORIDE REDUCTION PLANT, dogging franna and 55 ton all terrain crane, operating EWPS,removal and installation of pipework.
References:Andrew Hausler 0417003836 Clint Wood 0439720838 Dave Renton 0424386752
Company:GOODLINEDate: 1st July 2016 -4th July 2016
Site: BHPBIO NELSON POINT LRP3 SHUTDOWN PORT HEDLAND
Position: Advanced Rigger
Key Responcibilities:
Nightshift shutdown crew repair and modify vibrating screen chutes, fire watch.
References: Ben Halford 0427906654
Company: GOODLINE
Date: 16 April 2015 – 30th October 2015
Site: ROY HILL PORT LANDSIDE
Position: Advanced Rigger
Key Responcibilities:
Area C Screenhouse Rigger 600 ton crawler crane with Super lift set up and install hoppers and bins. Assemble lifting gear to lift study spreader bar shackles FSWR slings with Franna. Rig bins and hoppers with EWP set up superlift Pin hoppers and derigg with EWP. Lifts with 400ton Mani 16000 with maxer
Dogging and Rigging on.Various Frannas, 250 summi crawler, 200ton demag 70t Tadano.
Bolt out and rattleup screenhouse fine and lump bins with various EWPs including GENIE SX180 JLG 135, JLG125.
Install piping screenhouse
Punchlist Screenhouse.
Punchlist car dumper [night shift]
References: Rod Murphy 0427906904
Ben Halford 0427906654
Brett Pengelly 0417784403
Company: JOHN HOLLAND GROUP
Date 5 September 2014 – 2 April 2015
Site: RIO TINTO YANDI SUSTAINING PROJECT Yandi-Coogina Mine Site
Position: Advanced Rigger
Key Responcibilities:
Working on overland conveyor, building and installing modules, unloading large modules off trucks, setting up various cranes, 60 & 80 t roughys, 120t All Terrian, Dogging Franna.
Working on Dust collection tower. Steel erection with EWPs and cranes
Working on Surge Bin .Steel Erection with EWP and CRANES INCLUDING 350T LIEBEHERR CRAWLER with superlift. Several Heavy lifts over 100 tons lifting bins apron feeder, ring beams ect.
Instalation of switch rooms with 350t crane
Bolt out and rattle surge bin and punchlist.
References: Mark Angel ph 0467492262.
Andrew Kandalis ph 0403419763
\Alan Rhoden 0407213468 .
Mark Hayne 0419923105.
Company: Downer
Date 28 June 2014 – 30 July 2014
Site BHPBillton Shiploader 1&2 Replacement Project, Port Hedland
Position Advanced Rigger Ship loader 1 shutdown crew
Key Responcibilities
Dogging cranes on wharf and laydown yard loading and unloading conveyor modules and installing , installing steel, loading and unloading conveyor belt reels, and belt splicing gear, loading , unloading and set up of cable drums. Cranes used, 250t crawler, 220 & 70t all terrain and Franna .
Installing steel,bolting out ratteling up,fixing gridmesh and installing hydraulic pipework.
References Sam McGill Rigging Supervisor ph 0400425528.
Carl Kunde Construction Manager ph 0419346331
Company: Goodline
Date 15 May 2014- 22 May 2014
Site: Nelson Point BHPB Port Hedland
Position: Advanced Rigger
Key Responcibilities:
Shutdown drive truck set up containers onsite
Change out conveyor pulley
Replace and tighten bolts on reclaimer.
References. Goodline Wedgefeild Office ph 0891602600 Chris Grey supervisor. 0427556334
Company: Goodline
Date 2 December 2013 – 26 March 2014
Site: McArthur River Mine, Northern Territory. Expansion Project., FI/FO 21 /7 12hr days
Position: Advanced Rigger
Key Responcibilities:
Unload trucks with Franna and roughy cranes
Secoundary crusher pick and preassemble steel
Steel erection with crane and EWP.
Install chutes and mechanical components
Assist pipe fitters fab and install pipe systems, pressfit poly and threaded
Preassemble and load conveyor modules.
References: Simon Johnson, Supervisor 0458730123
Steve Hall, supervisor 0427906267
Christian Goreham Superindendant ph 0427906627
Company:Goodline
Date: 23 April 2013 – 17 November 2013
Site: Blending Yards, BHPB Inner Harbour Developement Finucane Island, Port Hedland. FI/FO 28/7
Position: Advanced Rigger
Key Responcibilities:
Setting up and dogging various cranes up to 400ton
Assemble and place conveyors
Loading and unloading modules onto SPMTs
Steel erection of various structures ,transfer towers, take up towers ect
Mechanical installation
Operation of EWPs
Quarterly Inspect and tagging of rigging equipment
Shutdowns intergrating new stockyard
References: Dustin Te Ata , rigging supervisor. Ph 0425256463
Graham Hinder (Dicki) Rigging Superintendant ph 0418941901
Bill Stewart, supervisor, ph 0427007172
Ashley Seymore Rigging Superintendant ph 0427906098 or 0416244830
Rob Buck Construction Superintendant 0427906605
Company: Monadelphous
Date: 23 August 2012 – 9th January 2013
Site: BHPB Inner Harbour Redevelopement Finucane Island Car Dumper. FI/FO 28/7
Position: Advanced Rigger
Key Responcibilities:- Dogging various cranes- Operating EWPs- Part of the steel erection crew, Car Dumper 5 Night Shift
References: Graeme McINERNEY (rigging supervisor) 0402266871, MURRAY BEAMAN-YOUNG (rigging supervisor) 0458586689.
Company: Programmed Construction & Maintenance
Date: 21 June 2011 – 14 August 2012
Site Sino Iron Cape Preston. FI/FO 28/7
Position: Advanced Rigger
Key responcibilities:
EWP work on conveyors, ratteling up, gridmesh Piperacks, measuring up installing pipe brackets Pipe rigging with 80 ton Roughy & EWP Install pipe shoes with 150t crawer crane & ewp Install pipe with Franna, Roughy & Crawler cranes & EWP Steel erection ballmill structure, collums, beams, ,gridmesh,
handrail, With EWP, 55t, 150t Cranes&Franna, Pipe work with Franna pick carry place spools ect, dress cyclones.
References: Mick James 0429959743 ,Danny Withers 0408932496, Scott Markham 0417352134 Scott McLaren 0419042650
Company: CSI – Crushing Services International
Date: 26 October 2010 – 11 April 2011 Site: Christmas Creek . FI/FO 28/7
Position: Advanced Rigger
Key responsibilities:
Rigging and dogging for various cranes – 70T Tadano roughys, 150T Summitomo crawler, 50T Grove roughy, 20T Frannas;
Fitting out conveyors with pulleys and rollers, installing mechanical equipment for a crushing plant;
Participating in dual crane lifts; Working at heights from EWPs - Genie Z60, 80, 125 & 135;
Erection of structural steel; Liaising with Structural Supervisors and Site Leading Hands Working 200ton crawler, pipe racks, pipe. Pipe rigging Desands building [steel & polypipe]. Asembley of rubber lined cone hoppers, tanks, cyclones Use of Man Box on crane.
References: Michael Rose- 0418 921 460[wont answer blocked numbers] Ezra Armitage 0407 645 907
Jim McCafferty 0419925550
Company: John Holland Group
Date: 25 May 2010 – 8 October 2010
Site: Worsley Alumina
Position: Basic Rigger
Key responsibilities:
Dogging for Favell Falco 250T Tower crane, 280T Summitomo luffing boom, 25 & 20T Frannas, various roughies and crawlers;
Erection/installation of structural steel; Heavy lifts - 50 ton prefab floor modules, large vessels, ducts and
pipes; Using chain blocks and cumalongs while installing piping and ducting; Laying checker plate; Unloading flat racks off trucks and steel off flat racks; Operating EWPs, JLG 125; Reading drawings
References: Josh Lind, Supervisor - 0423 028 857 or 0414 763 748 Rick Southern, Leading Hand - 0427 053 981
Company: Owner Builder
Date: 23 April 2009 – 25 May 2010
Company: John Holland Group
Date: 16 January 2009 – 22 April 2009
Site: RGP4, Newman. FI/FO 28/7
Position: General Hand
References: Peter Jackson, Supervisor - 0412 213 036
Company: United Group Resources
Date: 21 November 2007 – 16 December 2008
Site: Cloudbreak Minesite. FI/FO 28/7
Position: Basic Rigger
References: Graeme Daniel, Rigging Supervisor - 0458 567 937 JAMES JEAN PIERRE, SUPERVISOR my time as a TA -0488919439
Company: Laing O'Rourke
Date: 4 September 2006 – 3 October 2007
Site: Yandi JSE. FI/FO 28/7
Position: Trade Assistant
References: Wayne Green - 0439973236 (They know me by my nickname “Buttons”)
Company: O' Donnell Griffin
Date: 1 August 2005 – 17 May 2006
Site: DCP Worsley
Position: Trade Assistant
References: Geoff Lawler, Foreman – 0408 968 470
Company: WA Skill Training (labour hire to O' Donnell Griffin)
Date: 10 June 2005 – 30 July 2005
Site: DCP Worsley
Position: Trade Assistant (Electrical)
references: Brian Fearn, Supervisor - 9734 10 56
Company: Huddson and Hei
Date: May 2005 – June 2005
Site: Kewdale
Position: Trade Assistant