William J. CrowleyConstruction Manager, Electrical Construction Engineer, Electrical Inspector, Electrical Construction Coordinator,

Electrical Field Engineer, Database Manager, Electrical Design Group Leader3901 Shaffer Road, Ellwood City PA, 161173901 Shaffer Road, Ellwood City PA, 16117

Home: 724-924-2860 Cell: 724-822-4808 wcrowley2421@yahoo.com wcrowley2421@yahoo.com

http://www.linkedin.com/in/crowley063

PROFESSIONAL SUMMARYDiversified experience in all phases of engineering, construction and project management for: light and heavy industrial projects, gas turbine simple, combined cycle and super-critical coal fired power plants, steel, pulp and paper mills, nuclear, aluminum, IBM computer chip and chemical plants. Also, supervised the electrical engineering, construction, and start-up on fast-track, turnkey projects. Held lead positions on numerous Brownfield and Greenfield projects with approximate values of $50 million to $2.0 billion (+) (-).

Practice and observe “Safety with high quality standards”. Astute expertise working with Access/excel Conduit and Cable Schedule Databases. Proficient in: maintaining daily detailed contemporaneous notes, scribe role, project controls, tracking of installed quantities, bid and proposal preparation/negotiation, change order and successful claims/risk litigation experience. Ability to: apply effective problem-solving skills, project implementation and quality improvement processes and manage multiple projects concurrently, implement strong organizational, planning and time-management skills.

Strengths include being energetic, self-starter, effectively managing all assignments for completion in a timely, and cost effective fashion, within scope, schedule and budget. Offer a wealth of practical experience and astute technical expertise. “A people-orientated leader” with good follow-through skills minus the finger pointing. A valuable asset to any contractor with the influx of cost effective, minimal RFC engineering drawings issued to the field. Also equally as valuable as a design lead on the engineering side with ability to work through constructability issues and exactly what level of detail is actually needed by the electrical contractor. Experience working with union and non-union crafts. Maintained a professional set of construction as built drawing modifications for client. Ensuring installation was per as-sold specifications, applicable contract drawings, NEC, and all state and local codes. “Boots on the Ground” providing on site perspective.

PROFESSIONAL EXPERIENCE 06/2016 – 09/2016 DSC - Defined Source Cooperative, 2031 North Broad ST, Suite123, Lansdale, PA 19446, Telephone 215 - 487-7800, Fax 215-412-4108, www.definedsource.comAssigned to Enviva (ENVIVA), Enviva Wilmington State Port facility, Bio Mass Pellet Port facility Wilmington NC, 28402.The Electrical Construction Coordinator is responsible for conducting construction activities related to electrical, Instrumentation and controls. Responsibly for monitoring and documenting construction Personnel safety and quality of work performed. Responsibilities were but not limited to: Coordinate with engineers and developers in the constructability and execution of electrical installation. Monitor contractor performances; insure adherence to design and technical specifications. Coordinate construction efforts to insure4 continuity with other contractors and avoid any disruption of Port Operations. Perform site inspections for quality control and document. Communicate with CM or designated supervisor regarding concerns about construction progress. Perform other duties as requested by supervisor. May analyze project information to determine and/or forecast trends utilizing detailed instruction received by CM. Generate quantity based reports on in-in-place work completed by the contractor. Create and maintain necessary files. May provide input concerning resolution of RFI. Familiarity with specifications, shop drawings, and submittals. Maintain projects lists and close out documentation. Interface with general contractors and subs and be detailed oriented with follow up skills. Respond to inquiries from project personnel regarding assigned project status. Assist in organizing work relating to specific assigned project deadlines. Coordinate the unloading, verification and documentation of Enviva purchased equipment. Take the lead field role in checkout and commissioning.05/2015 – 02/2016 - CH2M Hill, Environmental and Engineering Consulting, 400 Industry Drive, Coraopolis PA, 15108 Electrical Construction Manager Assigned to the Voestalpine Texas LLC Direct Reduction – Hot Briquetting Iron Facility, Portland TX.

Responsibilities were but not limited to the following;

Managed Work Package (WP-13) Electrical Process Control and Instrumentation Maintained project files – CH2M Hill and Siemens/Midrex Engineering drawings Distributed correspondence (i.e., daily updates with site photos, RFI’s and critical issues), Transmittals/Submittals Weekly meetings with the contractors on site and also meetings with all other contractors Monitored project schedule with current progress Attended weekly site project meetings, consisted of progress updates and once-a-week look ahead with Voestalpine “Boots on the Ground” providing daily safety observations, managed electrical installation activity of Package E-13 work in

process, coordinating any and all potential interferences with other contractors before they became an issue Assisted both E-13 Electrical and Instrumentation superintendents spotting the locations of the instrument and operator control

stations throughout all areas in the plant as they became available

07/2014 – 01/2015 – HKA ENTERPRISES, INC. of Duncan, SC/CH2M Hill, Pittsburgh, PAAssigned to Allegheny Technologies, Inc. (ATI) Flat Rolled Metals, Midland, PA.Assigned to Allegheny Technologies, Inc. (ATI) Flat Rolled Metals, Midland, PA. Functioned as a Construction Manager (on site) over the contractors working on the new construction of SCR unit associated with the direct reduction anneal and pickle DRAP Line at the Midland Facility. (Selective Catalytic Reduction [SCR]) System -Combustion System Design. Responsibilities were but not limited to the following; Maintained project files● Distributed correspondence (i.e., daily updates with site photos, RFIs and critical issues)● Monitored project schedule with current progress ● Daily meetings with the contractors on site● Distributed ATI Safety Observation Sheets from all contractors for ATI● Attended weekly site project meetings which consisted of progress updates and a one-week-look ahead● Coordinated with engineering the contractor requests for information (RFIs) and submittals. an● Coordinated and worked with Andritz Metals Engineering, Construction on equipment deliveries and storage location in plant● Provided project management, project controls, and document control services to support the construction efforts

“Boots on the Ground” for ATI providing daily safety observations, QA, and coordinating all outside deliveries to job site Leaving site with the plant online running and a punch list of all work yet to complete after plant was online.

Worked up through Cold and Hot Commissioning, coordinating with Midland Borough Building inspector and contractors on 12/2012 – 04/2014 R.T. PATTERSON COMPANY, INC. PITTSBURGH, PA. Assigned to Horsehead Corporation Greenfield Zinc SX/EW Plant in Mooresboro, N.C. as an Electrical Engineer/Construction Manager and coordinator over the electrical contractors and Aluminum buss bar installation in the Electrowhinning Facility. This includes a Zinc Cell House, Melting and Casting and 100KV Harmonic Filter and Transformer Rectifier Substation.

Coordinated with ABB with the installation of 100KV Transformers, Rectifiers and Harmonic Filter Yard up to start-up and Commissioning. Construction Management over electrical contractors in the 400 Zinc Cell house, 500 Melting and Casting, Ajax Furnace, Bag house and Cooling Towers

8/2011 – 12/2012 SARGENT E LECTRIC COMPANY, Prime Contractor to IPR Global Contractor Management Company at the V&M TWO LLC, 7” FQM, New Pipe Mill in Youngstown, OhioConstruction Field Engineer for Sargent Electric Company. We came on site in late July 2011 after the underground embedded conduit duct banks were approximately 75% completed by another electrical contractor.

Another fast track project "engineering late, not complete with very aggressive construction milestone dates. "The cable schedules” were broken down per area and other area’s not complete. There was no routing, no raceways designed or termination information. The Engineering Company that issued the embedded RFC conduit drawings along with other electrical installation drawings was no longer on the project when we started. Daniela, the Mill Builder is on site for assistance to answer questions through IPR. The Pipe Mill was assembled in Italy taken apart, crated up and shipped to this job site. IPR/Kvaerner was responsible for the location of the electrical equipment and components for installation. After Sargent position changed from a sub to Kvaerner to Prime Electrical Contractor it then became our responsibility. My role as the Lead Field Engineer has been pretty much been to help the lesser experienced electrician’s with the drawings, field problems and to provide the electricians with the information they need including making field sketches, spreadsheets and coordination with IPR and other crafts so they can complete their specific scope of work. We have had to use the original Danieli vendor drawings a map for finding equipment, equipment, device locations in lieu of not having the electrical installation drawings. Attend most meeting

2

and take the project contemporaneous notes as their scribe. Attend all daily/weekly IPR construction meetings and IPR/V&M TWO commissioning turnover meeting with Sargent’s QA/QC Manager. Coordination came from IPR who turned to Danieli (on site) as needed and were helping direct our field supervision in lieu of complete Electrical Installation Drawings. Often had to go into the cable schedules and pick up the holes in the cable schedules. Our field team had to work with what information we had, using our expertise and experience.

3/2011 – 8/2011 AEROTEK ENERGY SERVICES, A DIVISION OF AEROTEK INC.Contracted to McGraw/Kokosing, Inc. Middletown OH 45044 Electrical Construction Field Engineer at the Sun coke Energy project in Middletown OH. New construction of a state-of-the-art, environmentally friendly; Heat-Recovery Coke Battery capable of producing about 550,000 tons of coke along with 50 MW of Electric Power annually. This facility is located adjacent to AK Steel’s Middletown (OH) Works. “Worked and reported directly to Steve Parr “Kokosing AVP and Construction Site Manager.”

Another fast track project "engineering late and not complete with aggressive construction completion dates. “Writing new cable schedules” with the latest and final elementary, schematic and connection diagrams being received from Jacobs Engineering on a continuous basis during installation of electrical scope. This included Electrical (low and medium voltage switchgear; motor controls; transformers) and I &C. The Turbine and the FGD areas were my main focus of completing all circuits’ w/terminations along with the FGD Hamon Remote I/O-PLC Panel. Ensuring that the new cable database incorporated all new, revised elementary and wiring diagrams on RFC Cable Schedules for installation.

Coordinated and resolved required data from the updated data from the updated database spreadsheets, drawings, EWO’s and RFI’s for the planning and layout of work to complete as directed by the electrical supervision in the field. This information was needed to support the aggressive scheduled milestones for completion of contractual assigned project scope of work.

9/2009 – 9/2010 DSC - Defined Source Cooperative Philadelphia, PA. 19128

Contracted to Nitro Electric Company 9/2009 –9/2010Database Electrical Field Engineer at the Longview Power Plant, new 695 MW Supercritical Coal Fired Power Plant in Maidsville, WV. "Parent Company-Gen Power" Aker Kvaerner Solutions – General Contractor joint venture partner with Siemens Power Generation. Aker Kvaerner BOP. Siemens’ AQCS and Auxiliary Boiler Engineering. Responsibilities included but were not limited to:

Coordinated, resolved required data from the updated database spreadsheets, drawings, EWO’S and RFI’S for planning of work to complete to the electrical supervision in the field. Provided hands on terminating and labeling information, supporting System Turnover and Start-up activities to expedite electrical completion.

Generated production installed quantities reports on both a daily and weekly basis. Provided the electrical supervision for the Nitro’ site and project manager with pertinent information needed to support the scheduled milestones for completion of our contractually assigned project scope of work.

Coordinated, resolved and implemented electrical design expertise to provide onsite engineering assistance to assigning cable termination identification from the elementary and connection diagrams and was able to input into the label making process. Therefore, we were able to solve this problem with the cable termination information missing in the database.

8/2008 – 6/2009 CH2M HILL, Five Penn Center West, Suite 300 Robinson Township, Pittsburgh, PA 15276

Electrical Tech Specialist on the following projects: Nucor Steel Louisiana, LLC. St. James Parish, Louisiana Provided Preliminary Engineering and a Cost Appropriation Estimate for the electrical Installation of a new Mini Mill. Generated Installation of a new Mini Mill. Generated AutoCAD drawings for this estimate.

3

Mesabi Nugget Delaware, LLC. Generated on AutoCAD for the Medium and Low Voltage Equipment layouts, Single Line Diagrams to support this fast track engineering and construction integrated schedule Milestones.

Republic Special Metals, Inc. Radial Forge Plant North Jackson, Ohio Generated on AutoCAD drawings for the Power Distribution work with utilities.

Ellwood Quality Steels: New Castle Melt Shop, New Castle, PA. Design Lead with upgrades in the existing melt shop

The Timken Company, Canton, Ohio, USA, Faircrest Steel Plant Design Lead on new Vertical Bloom Caster Engineered and prepared a cost appropriation. Electrical Installation estimate along with preliminary engineering on AutoCAD. Coordinated, resolved and implemented electrical field construction expertise to provide assistance with engineering to the younger engineers and designers. Subsequently we were able to work constructability issues and come to agreement what level of detail was required on the installation drawings. 3/2008 – 8/2008 Pritchard Electric Company Inc. Huntington, WV 25703 Electrical Database Manager/Field Engineer At the AEP John AMOS Coal Fired Power Plant in Winfield WV 25213. Database Manager/ Electrical Field Engineer on the FGD Retrofit Project on Unit 1, 2 and 3. Responsibilities included but were not limited to: keeping the Sargent and Lundy Access Database updated with the latest revisions by AEP and Sargent and Lundy.

2/2006 – 3/2008 DSC – DEFINED SOURCE COOPERATIVE PHILADELPHIA, PA Electrical Construction Engineer (4/2007 - 3/2008) Contracted to Elm Road Services (A We Power, LLC Company) at the Oak Creek, WI Expansion Project – Elm Road Generating Station Units 1 and 2, two 615 MW Supercritical Pulverized Coal Fired Units with a new Coal Handling System. We met our scheduled completion in the fall of 2007. (EPC) Contractor was Bechtel Power Corporation, Frederick, MD. Supercritical Boilers – Babcock – Hitachi, Steam Turbine – Hitachi LTD and AQCS – Alston.

Observing Bechtel and/or its Subcontractors during installation, Reviewing QA/QC Electrical installation to as sold specifications, installation drawings, Set Route Database, NEC and all applicable codes, field verifying electrical completion to Bechtel’s latest P3 Schedule. Practice and observe “safety with high quality standards”

2/2006 – 3/2008 DSC – DEFINED SOURCE COOPERATIVE PHILADELPHIA, PA. 19128Electrical Construction/Field Engineer (2/2006 -4/2007) Contracted to Nitro Electric Company Electrical Field Engineer at the MidAmerican Energy new Unit No . 4, 890 MW First U.S. Supercritical Coal Fired Power Plant in Council Bluffs, IA. Builder Hitachi – Mitsui and Energy Company, Kvaerner Singer, Inc. - General Contractor .

12/2005 – 2/2006 Technical solutions, PITTSBURGH, PA . Electrical Field Engineer/Senior Electrical CADD Designer Contracted to Lockwood Greene/IDC at the IBM Hudson Valley Research Park Complex in Fishkill, NY

3/2005 – 11/2005 Alltek Staffing and Resource Group, Inc. Pittsburgh , PA. Contracted to R.T. Patterson Company as Electrical Field Engineer/Inspector Electrical Field Engineer/Senior Electrical CADD DesignerFor Wheeling Pittsburgh Steel Corporation at the Follansbee, WV Coke Plant.

Contracted to CV Engineering as Electrical Project Manager on SeverCorr CSP Mill in Columbus, Mississippi. Responsibilities included but were not limited to: prepared installation and Bid specifications, reviewed OEM and vendor electrical drawings and design documents. Led engineering activities by priorities to support on site construction activities, checked drawings for constructability, specifications and reviewed design documents, making required changes prior to issuing Bid packages

01//2003 – 03/2005, 12/2000 – 08/2001 AMEC-KAMTECH, Inc. ALPHARETTA, GA. Electrical Field Engineer/Cost Estimator

4

01/2003 – 03/2005 AMEC- KAMTECH, (Ahlstrom –Dexter) Windsor Locks, CT Electrical Field Engineer/Cost Engineer No. 15 Paper Machine. 01/2003 12/2003 KAMTECH INC. (Bowater) Catawba, SC Lead Electrical Field Engineer/Cost Engineer for a 1500 T/D Fiber line, a single vessel hydraulic digester with 4-stage bleaching plant.

4 / 2002 – 01/2003 KAMTECH INC. (DOMINION ENERGY) POSSUM POINT, VA Lead Electrical Field Engineer/Cost Engineer for a Combined –cycle electric generating facility. Project consisted of 2-GE 7FA Gas Fired Turbines, 1 200 MW Steam Turbine.

12/2000 – 08/2001 KAMTECH INC. (Santee Cooper ) ANDERSON, SC Electrical Field Engineer oversaw the construction (electrical and instrumentation installation) of an 800 MW Combined Cycle/Simple Cycle power generation facility consisting of a 500 MW Combined Cycle Gas Fired GE Turbine Generator System and two GE Frame 7F 150. MW Simple cycle GE turbine generators..8/2001 – 04/2002 PENPOWER INC. (Dominion Energy ) Shelocta, PA. Lead G...E. Electrical Field Engineer – Superintendent/Inspector for 4 - 7 FA'S simple cycle units. Responsible for the G. E. as-built access cable database, its distribution to the field and final as-built documentation turnover to the customer “ahead of schedule.”

06/1999 - 12/2000 R.T. Patterson Company, Inc. Pittsburgh PAElectrical Design Group Leader/Field EngineerAssigned to the following projects;● AK Steel – 5-Stand cold mill/tandem mill pinion and morgoil system upgrade.● US Gypsum Plant – Aliquippa PA – field assignment with Sargent Electric as an assistant project manager/scheduler and Systems turnover of over 80 systems, 8200 circuits and 72,000 terminations● US Steel – ET Works, Braddock PA – BOF slag splashing project. NWS & Wire Co, Sterling, IL – worked with Fluor Daniel’s, Nippon Steel Co and Danieli

01/1988 – 06/1999 Eichleay Engineers, Inc. Pittsburgh, PAElectrical Project leader/Field Engineer/InspectorAssigned to the following projects;● AK Steel Rockport Works – Single Stand Temper Mill and Roll Shop US Steel Fairfield, Alabama - Traveled to Brazil for inspection and testing of GE Motors for Q-BOP Project Armco Steel Butler PA – No. 3 Fume collection System, No. 3 EAF Pulpit and No. 2 Caster Upgrade Tuscaloosa Steel – SMS Continuous Slab Caster National Steel Corporation/Great Lakes Division Coke Battery – Field Assignment, check-out, start-up Inspection of fire damage and restoration some six months after commissioning US Steel ET Works – Skip Incline Upgrade Contraves USA – Wampum Mine Optical FacilityWeirton Steel – SMS 4 Strand Slab Caster and BOP ID fan upgrade required, rewinding existing motors (inspection and witness testing) at the Westinghouse Plant in Johnstown PA Armco Mansfield OH – Z – Mill Revamps Alcoa Davenport – 103” Cold Mill

1974 – 01/1988 Prior Engineering and Construction Experience Available Upon Request

EDUCATION1978 – 1980 - Associate Degree, Business Administration, Wheeler School, Pittsburgh, PA1975 – 1977 - Associate Degree in Drafting & Design Technology, Electronics Institute, Pittsburgh, PA

Professional Training: Computer Skills:OSHA 10 Hour 2008 Engineering Drawing Management System Quality Assurance/Quality Control Microsoft Word Microsoft PowerPoint

5

Claims Management Seminar Microsoft Excel Microsoft AccessNational Electric Code Seminar AutoCAD – CAD PLUS AutoCAD 2008Cost/Risk Management Seminar

MILITARY12/1968 – 01/1971 U.S. Marine Corps- Honorable Discharge, Communications Center Man/Operations Manager. This position required holding a Final Top Secret Crypto Security Clearance (not active).

6