reu final presentation: veritas update · the telescope davies-cotton design facets have a 24 meter...
TRANSCRIPT
![Page 1: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/1.jpg)
REU Final Presentation:VERITAS Update
Summer 2011Advisors: John Finley and Glenn Sembroski
Purdue UniversityBy: Kara Ponder
![Page 2: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/2.jpg)
Very Energetic Radiation Imaging Telescope Array System
Ground-based gamma-ray observatory Located at the Fred Lawrence Whipple
Observatory in Arizona Can be used to study black holes, pulsars,
supernova remnants, globular clusters, galaxies, dark matter, and other unidentified sources.
![Page 3: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/3.jpg)
The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter
dish with a 12 meter radius of curvature ~350 mirror facets which have a diameter of
.61 meters Camera is at 12 meters from mirror Use 499 photomultiplier tubes as pixels Detects 50 GeV-50 TeV, with maximum
sensitivity between 100 GeV and 10 TeV
![Page 4: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/4.jpg)
GAMMA RAY SHOWERS
•VERITAS cannot detect gamma rays directly because they are converted into an electromagnetic cascade in our atmosphere.•As a gamma ray interacts with an air nucleus in the atmosphere, it converts into an energetic electron and positron pair.•The electron and positron cannot go far before interacting with more particles. •The secondary particles created have such high energy that they move faster than the speed of light in air.•This creates a shockwave and then Cherenkov radiation in the form of blue light.•VERITAS detects the blue light from this process.
![Page 5: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/5.jpg)
•The telescopes will detect an elliptical shape if it is a gamma ray. (Adversely it would see a wide range of shapes if the source had been a cosmic ray.)•To find the source of the gamma ray, you can trace the ellipses back towards the center and where they cross is the location of the source. •Having four telescopes helps to discriminate against background noise and increase sensitivity.
![Page 6: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/6.jpg)
Simulations
KASCADE Monte Carlo to simulate photons
randomly hitting the facets Used vectors for raytracing Changed the location of the source in the
sky, facet jitter, focal plane location and alignment, facet location, and Whipple versus McGill alignment.
Simulations analyzed using “root”
![Page 7: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/7.jpg)
What is my job? Testing each update to the code Set the parameters of the simulations and
run them on a Linux terminal Use “root” to collect information from
simulations Use “root” in Linux to make plots with the
data Analyze the results Create power points and wiki pages to share
the research
![Page 8: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/8.jpg)
TYPES OF ALIGNMENT
![Page 9: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/9.jpg)
Normal
Whipple Alignment
![Page 10: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/10.jpg)
McGill Alignment
Implemented in spring of 2009
Camera position that is able to be moved along
the optical axis.
Normal
![Page 11: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/11.jpg)
Whipple versus McGill Alignment
This shows that the Whipple and McGill have a similar minimum but that McGill has a wider range of acceptable focal plane positions.
![Page 12: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/12.jpg)
Facet JitterIn order to make our simulations resemble more closely real results from the telescope, we added a facet normal jitter. This redirects each of the individual mirrors in each of the cardinal directions.
Our usual jitter angle is 0.0095 degrees.
![Page 13: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/13.jpg)
Facet Location
Hillas method: randomly produces facet where a photon hits.
New method: reads in a file with all the facet locations so that a photon hits a “real” facet within the simulation. ◦ More realistic
![Page 14: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/14.jpg)
FOCAL PLANE UPDATE OF VERITAS
![Page 15: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/15.jpg)
Is it beneficial to move the focus from infinity to the gamma ray shower maximum?
![Page 16: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/16.jpg)
Both use McGill Alignment but one has the source at infinity and the other at 10 km. They both have the same pattern of gradually increasing the containment diameter but at infinity the
diameter is 0.09 degrees.While the source at 10 km has its smallest radius at 0.112 degrees.
![Page 17: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/17.jpg)
Shows that there is a wide range of focal plane locations that yield results of about the same caliber.
![Page 18: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/18.jpg)
Shows the same thing is true with the source at 10 km instead of infinity.
![Page 19: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/19.jpg)
How do they compare?
The graphs only differ by about 0.02 degrees in containment. From these graphs we can also see that the minimum is
about 11.98 meters.
![Page 20: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/20.jpg)
Holds for the source at infinity and 10 km.
![Page 21: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/21.jpg)
0.0 degree Offset Comparison
Source at Infinity Source at 10 kilometers
![Page 22: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/22.jpg)
Center of Mass location
![Page 23: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/23.jpg)
Point spread function comparison at 10 km
0.6 Degree Offset 1.2 Degree Offset
![Page 24: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/24.jpg)
0.6 degree Offset Comparison
Source at Infinity Source at 10 kilometers
![Page 25: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/25.jpg)
1.2 degree Offset Comparison
Source at Infinity Source at 10 kilometers
![Page 26: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/26.jpg)
Star at normal position. In agreement with J. Grube.
![Page 27: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/27.jpg)
For the source at 6, 10, and 14 km, the minimum is between 10 and 20 mm displacement.
![Page 28: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/28.jpg)
The source is at 10 km and has a changing offset which has its minimum at ~15 mm displacement. The minimum is close to 0.045 degrees.
![Page 29: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/29.jpg)
Conclusion
The data shows that moving the source to 10 kilometers and the camera back by 15 millimeters produces almost the same result as having the source at infinity and the camera at exactly 12 meters.
![Page 30: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/30.jpg)
What’s next?
Further tests to optimize the telescopes capabilities. ◦ Add code to place facets instead of randomly
generating them◦ Finding shower maximum location
Gamma Ray Shower Simulations (if there is time)
![Page 31: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/31.jpg)
COMPARING SIMULATIONS TO REAL DATA
![Page 32: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/32.jpg)
Hillas Method
![Page 33: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/33.jpg)
With VeritasFacetLocations.txt
![Page 34: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/34.jpg)
The actual facet locations create about the same match for the
beginning of the curve but a better fit with the top curve.
Hillas Method Using actual facet locations
![Page 35: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/35.jpg)
Is there a way to change the simulation to better match the observed data?
![Page 36: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/36.jpg)
The fit with the simulation remained constant for about 5 mm up or down from
the original focal plane location.
Original simulation Focal Plane at 12 m
Simulation with Focal Plane at 11.995 meters or 12.005 meters
Hillas Method
![Page 37: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/37.jpg)
However, it was an acceptable fit for another 5 mm. So there is about a 2 cm range that does
not matter.
Original simulation at 12 meters Simulation at 11.99 meters or 12.01 meters.
Hillas Method
![Page 38: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/38.jpg)
Focal plane at 12.005 m
Focal Plane at 12 meters
Focal Plane at 12.01 m
Actual Facet Locations
![Page 39: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/39.jpg)
Result
Both methods have a range of fits that are very similar. However, the best fit uses the actual facet locations at a focal plane length of 12 meters
![Page 40: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/40.jpg)
The simulation does not fit as well on the top curve for elevations closer to zenith.
Hillas Method
![Page 41: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/41.jpg)
Moving the focal plane by 1 cm creates a fit that is much more
accurate.
Original focal plane location. Focal plane at 11.99 meters or 12.01 meters.
Hillas Method
![Page 42: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/42.jpg)
Using actual facet locations we see the fit improves in some areas when the focal plane location is moved by 1 cm
Focal Plane at 12 meters Focal Plane at 12.01 meters
![Page 43: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/43.jpg)
Result
The original facet locations fit is better than the original Hillas fit, but the Hillas at focal plane location of 12.01 meters is the best fit out of all four graphs.
![Page 44: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/44.jpg)
Hillas Method
![Page 45: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/45.jpg)
Actual Mirror Facets
![Page 46: REU Final Presentation: VERITAS Update · The Telescope Davies-Cotton design Facets have a 24 meter radius of curvature Facets mounted on a 12 meter diameter dish with a 12 meter](https://reader034.vdocuments.net/reader034/viewer/2022050103/5f41d3d0ebcfa56f863291d0/html5/thumbnails/46.jpg)
Using the actual facet locations will improve the fit opposed to randomly creating them
In the future◦ Create a second jitter to make oursimulations better matchthe data.
Conclusion