revised 6/01...pipe) astm d3035 26012_f_toc 2 12/5/06, 12:50 pm f copper type k soft type k, soft...
TRANSCRIPT
Revised 6/01
Tubing
Copper and Plastic Tubing
Copper TubingType K, soft temper, copper water tubing remains
free from rusting and is highly resistant to corrosionand scale formation. It is easily bendable to conformto underground trenching and is conductive to enablethawing. At the water main, a long-radius bend shouldbe formed in the tube to allow for stresses and groundsettlement.
Plastic TubingThe use of polyethylene (PE) tubing has greatly
increased since its introduction in the late 1940’s. Theresin used today by most pipe and tubing producers isPE-3408 a high density polyethylene (HDPE) with highmolecular weight.
Tubing produced from PE-3408 achieves a pres-sure rating of 200 psi and is one of the strongest andmost durable tubing products available. PE-3408 isnearly chemically inert making it impervious to rot, rustor corrosion.
PE-3408 tubing is very flexible and comes in longcontinuous lengths which reduces the number of jointsand fittings needed thereby making a secure and long-lasting installation.
Abbreviations Common to Tubing
CP ............ Copper PipeCTS .......... Copper Tubing Size (outside diameter same
as the corresponding size of copper tubing)PB ............ PolybutylenePB CTS ... Polybutylene (outside diameter same as
the corresponding size of copper tubing)ASTM D2737
PB IPS ..... Iron Pipe Size Polybutylene (outsidediameter same as corresponding size of ironpipe) ASTM D3035
PE ............ PolyethylenePE CTS .... Copper Tubing Size Polyethylene (outside
diameter same as the corresponding size ofcopper tubing) ASTM D2737
PE IPS ...... Iron Pipe Size Polyethylene (outsidediameter same as corresponding size of ironpipe) ASTM D3035
26012_F_toc 12/5/06, 12:50 PM2
F
Copper Type K Soft
Type K, soft copper tubing, remains free from rusting and is highly resistant to corrosion and scale formation. Type K has a heavy wall thickness for underground ser-vices from the water main to the house connection. It is conductive to enable thawing and its flexibility allows it to conform to underground trenching.
Type K copper tubing is annealed to toughen and to remove internal stress. It is suitable for use with flared, compression and solder type fittings as long as rounding and sizing are performed.
* 1½" & 2" copper tubing in 20-foot lengths are straight lengths. All other above tubing comes in coils.
NOTE: See our Service Brass, Section G, for a complete line of fittings and valves for use with this tubing.
SHORT SPEC:Copper tubing shall meet the requirements of Federal Specification WW-T 7996 and shall conform to ASTM specifications B-75, B-88 and B-68 as they apply to Type K Copper Tubing.
COPPER TUBING
SIZE COIL LGTH
PRODuCT NuMBER
½" 60 ft. 46010½" 100 ft. 46012¾" 60 ft. 46020¾" 100 ft. 460301" 60 ft. 460401" 100 ft. 46050
1¼" 60 ft. 460601¼" 100 ft. 460611½" 60 ft. 460701½" 100 ft. 460691½" 20 ft. 46110*
2" 40 ft. 460802" 60 ft. 460812" 20 ft. 46120*
NOM. SIZE
O.D. (in.)
WALL THICKNESS
I.D. (in.)
WT. LBS./FT.
1⁄2" 0.625 .049 0.527 0.3443⁄4" 0.875 .065 0.745 0.6411" 1.125 .065 0.995 0.839
11⁄4" 1.375 .065 1.245 1.04011⁄2" 1.625 .072 1.481 1.360
2" 2.125 .083 1.959 2.060
Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637
Tubing F-1
www.ejprescott.com F-1
HDPE Tubing High Molecular Weight
Polyethylene Tubing has many distinct advantages over other types of service pipe. It will not rust, rot or corrode. It has exceptional toughness, excellent resistance to abrasion and will flex repeatedly without damage. CTS Polyethylene Tubing is designed for 200 P.S.I. IPS Polyethylene is offered in four different working pressures 100, 125, 160 and 200 P.S.I.
Its pressure rating remains unaffected by mild nicks and scratches that may occur during installation. The tub-ing will not crack or split at subzero temperatures, even if filled with ice. The insulating qualities of Polyethylene help to prevent water from freezing inside the pipe. Should freezing occur, thawing should be done with steam or hot air, not with direct flame.
Polyethylene Tubing
NOTE: Our copper tube size Polyethylene Tubing can be used with compression fittings without special adapters. See our service brass section for a complete line of fittings and valves. Insert Stiffeners are required.
NOTES:Virgin natural HDPE•Continuous footage marks every two feet•NSF certified meets C901-96 standard•
SHORT SPEC:Copper Tube Size (CTS) Polyethylene shall have a working pressure rating of 200 P.S.I. and shall conform to AWWA C901, ASTM D3350 and ASTM D2737. Iron Pipe Size (IPS) Polyethylene shall have a working pres-sure of 160 P.S.I. and shall conform to AWWA C901, ASTM D3350 and ASTM D2239.
SIZECOIL
LENGTH (ft.)
PRODuCT NuMBER
CTS IPS
¾" 100 46130 46226¾" 200 46132 NS¾" 300 46135 NS¾" 500 46140 NS1" 100 46150 462311" 200 46155 NS1" 300 46160 462331" 500 46162 1 46233 15
1¼" 100 46164 46234 21¼" 300 46165 46234 11½" 100 46170 46235 11½" 300 46180 46235 5
2" 100 46190 462402" 200 46195 —2" 300 46196 462562" 500 46197 —
BLUE CTS PLASTIC TUBING
SIZECOIL
LENGTH (ft.)
PRODuCT NuMBER
¾" 100 46130B¾" 300 46135B¾" 500 46140B1" 100 46150B1" 200 46155B1" 300 46160B1" 500 46162 1B
1¼" 100 46164B1¼" 300 46165B1½" 100 46170B1½" 300 46180B
2" 100 46190B2" 200 46195B2" 300 46196B
Tubing F-2
Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637F-2 www.ejprescott.com
F
NOTE: Insert stiffeners are required when compression connections are made to insure a leak-free installation.
Tubing Tools
Combo Flaring & Rounding Tool
We have redesigned the standard rounding tool by adding more gripping area and by knurling the handle, which assures a positive grip and safer operation. Drive the tool part way in to round, or all the way in to flare.
The tubing end has been extended for better round-ing and bored out to reduce weight. Machined pressure relief ports are added to prevent the tool from rebounding should back-pressure develop during either the rounding or flaring process.
¾" through 2" sizes are available and feature black oxide finish to inhibit corrosion.
Copper Shutoff Tool ¾" & 1"
This compact and easy-to-use tool shuts off, holds, and then restores flow of water in copper tubing.
STAINLESS STEEL
TUBING INSERTS
SIZE PRODuCT NuMBER
¾" 477301" 48330
1¼" 485251½" 48910
2" 49310
COMBO FLARING
& ROUNDING
TOOL
SIZE PRODuCT NuMBER
¾" 639051" 63908
1¼" 639111½" 63913 1
2" 63916
COPPER SHUTOFF TOOL
SIZE PRODuCT NuMBER
¾"-1" 63114
Stainless Steel Tubing Inserts
Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637
Tubing F-3
www.ejprescott.com F-3
Plastic Pipe Snipper
For cutting 1⁄8" to 1½" O.D. pipe, this hand-held tool has the versatility to cut the following material:
Polyethylene Pipe and Tubing•Fabric Reinforced Rubber or Neoprene•Heavy Wall Air Conditioner Hose•Plastic Gas Pipe•Polypropylene Pipe•Welding Hose•Live Rubber such as surgical tubing•Nylon, Plastic or Hemp Rope•
Tubing Cutters For Copper, Brass and Aluminum
Tubing Tools
NOTES: To cut plastic pipe, order recommended cutter wheel •for plastic separately.See Section S for additional tubing and pipe cutters.•
NOTE: All ratchet shears’ blades can be easily sharp-ened or replaced.
PLASTIC PIPE SNIPPER
PRODuCT NuMBER
63116
COPPER TUBING CUTTER
SIZE PRODuCT NuMBER
1⁄8"-1" 631353⁄16"-1¼" 631435⁄8"-21⁄8" 63144 1
These copper tubing cutters have a large grip knob for comfort during use. Reamer is built inside grip knob for convenience and safety. Wide rollers yield a square cut while thin cutter wheel profile insures a quick, clean cut.
Tubing F-4
Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637F-4 www.ejprescott.com
F
PE Shutoff Tools
PE WATER SERVICE SHUTOFF TOOL
PRODuCT NuMBER
63114 4
PE STANDING SHUTOFF TOOL
PRODuCT NuMBER
63114 45
Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637
Tubing F-5
www.ejprescott.com F-5
PE Water Service Shutoff Tool
Designed for emergency shutoff of PE water services. Hinged at one end with a snap lock device that can be taken apart quickly to allow work in confined areas. Open end has latch to hold tool closed until the repair is made. Zinc plated for corrosion resistance.
SPECifiCaTiONS:Pipe Capacity - Nominal: ¾" - 1"•Length: 18"•Weight: 2.7 lbs. •
Standing Shutoff Tool
Reed's Standing Shutoff Tool compresses ¾" to 1" PE plastic tubes to stop the flow of water. The tool uses 30" handles to develop a clamping force in a manner similar to a pair of bolt cutters. The long handles make for easy shutoff with a chain to hold the tool closed. Not intended for gas service lines.
SPECifiCaTiONS:Pipe Capacity - Nominal: ¾" - 1" •Length: 43"•Weight: 16 lbs.•