rfid i framtidens förpackning sami liponkoski, upm raflatac rfid
TRANSCRIPT
RFID in future packaging
Sami Liponkoski
Area Sales Manager North Europe
UPM Raflatac RFID
UPM Raflatac 2
Contents
UPM Raflatac RFID visibility – when is the package RFID active? Practical tests done And the business case…
UPM Raflatac 3
Raflatac and UPM Rafsec are together UPM Raflatac:
UPM Raflatac
Labelstock business area
RFIDbusiness area
Pressure sensitive solutions for branding and information transfer
World leader in high-quality RFID tags and inlays
UPM Raflatac 4
Rafsec RFID Tags and Inlays
We produce both HF and UHF tags
We offer various delivery formats:
dry inlay
wet inlay
paper-faced tag
In-mould tag
UPM Raflatac 5
Focus Segments
TransportationPharmaceutical Industry
Apparel & Item Authentication
Mass Transit & Event Ticketing
Media Management Retail SCM
UPM Raflatac 6
Service Offering
Understanding
Tag Behaviour
Tag Characterization
Understanding the Tag
UPM Raflatac 7
Factors of Transponder Readability
TRANSPONDERTRANSPONDERREADERREADER
READER ANTENNAREADER ANTENNA
PORTAL CONFIGURATION
PORTAL CONFIGURATION
END USE PRODUCTEND USE PRODUCT
ENVIRONMENTENVIRONMENT
LOCAL REGULATIONS
LOCAL REGULATIONS
PROTOCOLPROTOCOL READABILTYREADABILTY
UPM Raflatac 8
G2 tags for RTI
Tagging plastic trays is one of the challenging areas in case level tagging. Tags are normally located very close to each other which usually has a significant influence on performance.
Handling of plastic trays requires high durability against mechanical wearing and resistance to humid and high temperature
Due to the high requirements of the environment UPMRaflatac offers an superior In Mold tag solution for new trays. Existing trays can be tagged by Retrofit tag solution in order to ease the adoption of RFID
RFID Tagging of Plastics
What is the Short Term Impact on Plastics
-Case-like Plastic Containers will be Tagged
-Returnable Plastic Assets will be In-Mold Tagged
-Plastics Housings for Expensive Components will be In-Mold Tagged
-Existing Returnable Assets will need Tagging
-Pallet Shrink Wrap Trash will have Tags
What is the Long Term Impact on Plastics
-Molders will be asked to In-Mold tag All Containers
-RPC will have a permanent GRAI and password changeable SSCC
-RFID Tag Cost will Approach Bottle Cost
-In-moldLabels will have RF Tags Embedded
-Everywhere tags are handled, validation occurs
-Most Recycled Plastic will still have RFID
-RFID can be used for Recycle Auto-Sorting
RFID Tagging of Plastics
Recycling Considerations:-Business Case Drivers (Out of Stock, Warranty, Self Checkout) required RFID tags near impossible for consumers to remove
-IMT RFID and RPC will have essentially the same life span
-IMT RFID will require "milling" to remove
-Economics will likely drive IMT RFID on bottles
-Grinding of Recycle will make RFID tags unremovable by specific gravity
-Is there a technology to remove In-Mold Labels today?
RFID Tagging of Plastics
UPM Raflatac 12
G2 for Corrugated Cases
Frog has shown very high performance in dock door case level tagging
– 100 % readability even with 100 tag population (macaroni)
– min 95% readability with 95 cases (candy boxes)
DogBone has shown very high performance in dock door case level tagging
– 100 % readability even with 150 tag population. Paper products
– 100 % readability in mobile phone application (population 70 tag/70 cases)
UPM Raflatac 13
Dense Reader Environment10 Portal Test - Cages
UPM Raflatac 14
Dense Reader Environment 10 Portal Test - Tagged Trays on Dollies
UPM Raflatac 15
10 Portal Tests - Test 3: Results
10 Portals – 3 Channels 26 Tags per dollie 17 simultaneous Passes Walking pace 170 total passes 102/170 read 100% tags 95% Tag read 100% Dolly read
Door Tag
Read
Dolly Read
31 91% 100%
32 99% 100%
33 96% 100%
34 93% 100%
35 97% 100%
36 97% 100%
37 85% 100%
38 100% 100%
39 95% 100%
40 97% 100%
Success 95.0% 100%
No read periods missed
UPM Raflatac 16
UPM Raflatac 17
– Increased Sales– Efficient Production Planning – Smart Recalls– Improved Inventory Control /
Reduced Inventory – Efficiencies
– e.g. Faster Receiving And Shipping
Potential benefits for suppliers
UPM Raflatac 18
– Automated Inventory Count– Faster Receiving And Shipping– Improved Quality Inspection At
Distribution Centers
Potential benefits for DC’s
UPM Raflatac 19
Business case in theory- How about in practice
Things heard in the industry 80-100 processes RFID has influence on - Best Buy Double digit increase in turnover in the pilot stores - M&S 90% of the "red lights" are caused by not received or faulty EDI
dispatch advice. - Metro In most of the OOS situations we know we have the goods, we
just don't know where?- Wal*Mart We know the technology is not 100% at the moment however
we are 100% sure that we need it. - Wal*Mart Items selling 1 – 15 units / day will have up to 30 %
improvement in out of stock – University of Arkansas
UPM Raflatac 20
Rafsec Tags Ute I Världen
UPM Raflatac 22