rgb controller - dc pwm based - osum
TRANSCRIPT
RGB Controller - dC pwM BASEd(OS-SS-RGB-CTL-2M-NW)
Page 1
• ThreeChannelsintegratedinonemoduletocontrolRGBLEDstripfortruelightcolorcontrol
• BasicControlOn/Off,AdditionalDim-Up/Dim-DownControl
• WiredandWirelessConnectivityforControlandConfiguration,Wi-FiandWired(SL-BUScommunicationprotocol)
• Wi-FiDirectaswellasCloudBasedConnectivitytoControlfromAnywhere
• Backlitedindicationforlocatingbuttonsinthedark
• ProgrammableBacklitedLEDintensitytosuityourneed
• Stylish,Innovative,ModularandCompactdesign
• AdvancedZoning,Scenecontrolsupportedformoodlighting
• Programmabletoanyof65000colorshades
• SupportsAllDCPoweredThreeChannelLEDStrip
• SupportIEEE802.11b/g/nWi-FiStandards
• Built-inScheduler
• AutomaticFirmwareupgradeovertheair
• OffersadditionalCloudbasedcommunicationtoControlfromAnywhere
Introduction:
OS-SS-RGB-CTL-2M-NW is Osum Controller to control DC Powered RGB Tri-
color LED Strip used for mostly co-lighting purpose for Home interior. It
delivers greatly enhanced functionality as part of complete Osum automation
system.Thisdeviceoffers three channels to be connected to the three LED
channels connections for RGB LED strips that works in synergy to achieve
true color control. Thiscontroller is uniquely addressed, configurable, and
controlled independentlyoverSL-BUSTechnology. It alsohas localpushbutton
interface tocontrolColorand Intensity for LED strip. This controller supports all
the features exposed on SL-BUS,likegrouping(zoning),invokingpre-setscenes
(SpecificColorToneSetting)for dynamic ambience/ mood creation which is the
most demanding feature forarchitecturalautomation.
It is designed to be installed easily on the standard wall sockets and compatible with your existing LED Power
Supplies (12-24VDC). OS-SS-RGB-CTL-2M-NW along with other companion Osum devices offers state-of-art
cutting edge technologythrougheasyanduserfriendlyUIforcontrolandconfigurationonthesmartdevices.
Features :
Page2
TechnicalSpecification:Power ACInput 12VDC-24VDC,12Amp(Max)
MaximumLoadCapacity 4A/Channel,OhmicCurrentLoad
IdlePowerConsumption Lessthan0.2W(Average)
Communication Standards 2.4GHz,802.11b/g/ncompatible(InternalAntenna)
Wi-FiTxpower +14+/-2dBm(Max)
ControlInputs LocalButtons/ChannelButton-1&Button-2,Button-3forOn/off/dimcontrol& Button-4foroffoperation
ControlandConfiguration Wi-Fiand2-WireSL-BUSforadvancedcontrol&configuration
Environmental OperatingTemperature -10°C…+70°C
Humidity 95%RHy,non-condensing
Usage Indoor/Drylocationuseonly
Mechanical Mounting/Fittings Snapfittype/frontsideinsertionintosupportframe
Dimension/Weight 42(W)x42(H)x50(D)(inmm)/130gm
ConnectorType ScrewLessType,COLORCoded
ConnectorContacts DCIN,DCGND,R-CH,G-CH,B-CH,SL-BUS1,SL-BUS1
Safety Protection InternalLoadOvercurrentProtectionclampedto4Amp
Approvals ISI,CE(inprogress)
WiringDiagram:FrontView TopView
Load : 4A For Each ColorWarning:-Only RGB LED strips type of load to be used, if used any other load, may damage load or switch
Notes :4A for each Channel.How to calculate Load.Watt = voltage x currentSo current = Watt / voltageExample: If voltage=24V, Watt=60watt for 5meterSo current=60/24=2.5A
DC Driver
Phase
Neutral
DC Voltage12V DC TO24V DC (MAX)
+ve +ve
-ve
BLUEGREEN
REDRED
Input :12v - 24V DC
RGB Controller
RE
D w
ire
BLA
CK
wire
LED
1st Press Scene 1
2nd Press Scene 2
1st Long Press Scene 3
2nd Long press Scene 4
System Requirement :1) Android version 6.1 and above2) IOS version 11.0 and above3) IPADOS version 11.0 and above