rigid pcb board manufacturing facility...rigid pcb board manufacturing facility 3 st. helen’s...

ONLINE AUCTIONAssets Formerly Owned by Multek Europe Multilayer Technology GmbH & Co. KG

Rigid PCB BoardManufacturing Facility

3 St. Helen’s Place | London EC3A 6AB | UKTel +44 (0)8453 130 140 | Fax +44 (0)8453 130 150

www.hilcoind.com

IN CONJUNCTION WITH:

www.cbiworld.com

1 October 2013Böblingen, Germany

Hilco Industrial

2

ONLINE AUCTION

For more information, please visit our website at www.hilcoind.com

INNER LAYER LINES

Assets Formerly Owned byMultek Europe Multilayer Technology GmbH & Co. KG

AUCTION DATE1 OCTOBER 2013

PREVIEWSTRICTLY BY APPOINTMENT ONLY

LOCATIONMULTILAYER TECHNOLOGY GMBH & CO. KGHERRENBERGER STRASSE 110BÖBLINGEN71034 GERMANY

TRANSPORTAIRPORT: STUTTGART INTERNATIONAL (STR)20 MINS FROM SITE

FURTHER INFORMATIONA 16% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS.

AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING EURO

ONLY.

• ALL LINES OFFERED FOR SALE BY ONLINE AUCTION(S) UNLESSSOLD PREVIOUSLY BY PRIVATE TREATY

• FOR FURTHER INFORMATION ON MACHINERY & EQUIPMENT,

PLEASE CONTACT:

DANIEL GRAY AT +44 (0)8453 130 185 OR EMAIL

[email protected]

MARTIN KOLODZIEJCZYK AT +31 (0)20 470 0989 OR EMAIL

[email protected]

• FOR CUSTOMER SERVICE, PLEASE CONTACT SHIRLEY PHIPPS AT

+44 (0)121 237 6221 OR EMAIL [email protected]

INNER LAYER PRE-CLEANING / EXPOSURE LINE 1Kuttler HSP200 Board Unloading System with Automated PCB Gripper (1995)•Höllmüller Pre-treatment Line with Pos. 1: Feeder; Pos. 2: Core •Clean Degreaser 29; Pos. 3: Sink; Pos. 4: Sulphate of Soda Etching content: 520L; Pos. 5: Fourfold Sink; Pos. 6: Sulphuric Acid Neutraliser content: 215L;Pos. 7: Water Rinsing; Pos. 8: Dryer; Pos. 9: Discharge with Control Cabinet (1993)Eigenbau ORC 3 Exposure Device with 'Siemens' Simatic S5 395 Control•Tech Mech Automation PCV 3009 Conveyor•TekNek LCM750F2F240/5 Cleaning Station•Tech Mech Automation PCV 3009 Conveyor•Tech Mech Automation SIC3009-2 Buffer Stationb (2007)•Hakuto MACH630 UP Laminator (2006)•L+H Maschinenbau GmbH FIF017-H-IL Buffer Station•Maintech 018 Triple Hot Roll Pre-Heater•

3

INNER LAYER LINES

All lines offered for sale by Online Auction(s) unless sold previously by Private Treaty

INNER LAYER PRE-CLEANING / EXPOSURE LINE 3Kuttler BL 200 Loading System with PCB Gripper and Infeed Conveyor •(2001)Höllmüller Pre-Treatment Line Consisting of: Pos. 1: Feeder;•Pos. 2: Degreasing, Core Clean 29; Pos. 3: Cascade Rinsing 3-units;Pos. 4: Etching, Sodium; Pos. 5: Cascade Rinsing 3 units;Pos. 6: Pickling, Sulphuric Acid contents 260L; Pos. 7: Cascade Rinsing, 4-units; Pos. 8: Drying; Pos. 9: Discharge with control cabinet (2001)

Kuttler IE 20/11 Exposure Device with Touchscreen Monitor (2001)•Teknek CM 60650LRF3A/230/50 Board Cleaner (2001)•Kuttler PR90 Turning Station (2001)•Kuttler AFB60 Line Buffer (2001)•Hakuto PH-SGN-02 Pre-Heater (2001)•Hakuto MACH630 UP Laminator (2001)•Eigenbau 380mm Transfer Conveyor•Kuttler FB30/CC600/CC600 Line Buffer (2001)•

INNER LAYER PRE-CLEANING / EXPOSURE LINE 2Kuttler HS 200 L Loading System with 1 PCB Gripper and•Supply Tape System (1998)Schmid Pre-Treatment Line with Pos. 1: Feeder; Pos. 2: Hand Over;•Pos. 3: Core Clean Degreaser; Pos. 4: Triple Cascade Rinse;Pos. 10: Hand-Over; Pos. 11 and 12: Sodium Sulphate, Content 228L, Etching; Pos. 13: Triple Cascade Rinse; Pos. 14: Sulphuric Acid, Content 185L;Pos. 15: Fourfold Cascade Rinse; Pos. 16: Dryer; Pos. 17: Discharge with Control Cabinet (1998)

Eigenbau ORC 4 Exposure Device with 'Lauer' PSC 090 digital Control•Kuttler CL 650 Cleaner (2008)•Kuttler Turning Station (1998)•Kuttler AFB60/CC400 Buffer (1998)•Eigenbau Conveyor (380mm)•Hakuto PRH-350 Electric Pre-Heater, 5,5 kW (1998)•Kuttler FB30/CC/600/1000 Line Storage Unit (1998)•Eigenbau Conveyor (380mm)•

INNER LAYER LINES

For more information, please visit our website at www.hilcoind.com4

INNER LAYER DEVELOPING ETCHING & STRIPPING(DES) LINE 3

Kuttler BL 2000 Unloader (2001)•Advanced Engeneering Peelmaster PM 01 Foil Remover (2001)•Höllmüller Line with; Developing, Etching, Stripping, Consisting of:•Pos. 1: Infeed; Pos. 2: Developing, Step 1; Pos. 3: Developing Step 2, Soda Solution. Contents 1000 L; Pos. 4: Cascade Rinsing, 5 Units Contents390 L, Pos. 5: Check-Up; Pos. 6-7: Etching, Step 1-2 CuCL2, Contents 2000 L; Pos. 8: Finish Etching; Pos. 9: Cascade-Rinsing, 5 Units,Pos. 10: Check-Up; Pos. 11: Stripping, Step 1-3, Caustic Soda Lye, Contents 1100 L; Pos. 13: Finish Stripping; Pos. 14: Cascade-Rinsing 5 Units;Pos. 15: Drying; Pos. 16: Discharge (2000)Kuttler BUP 200 Unloader with 2 PCB Grippers, Exit Conveyor (2001)•

INNER LAYER DEVELOPING ETCHING & STRIPPING (DES) LINE 2Kuttler HSP 200U Unloading System with 2 PCB Grippers and Infeed Conveyer (1998)•Schmid Combi Line with; Developing, Etching, Stripping, consisting of 20 positions among others Pos. 1: Feeder; Pos. 2-4: Developing, Soda Solution 474 L;•Pos. 5: Sink Magnesium Sulfate; Pos. 6: Check-Up; Pos. 7-8: Etching; Pos. 9-10: Etching Cucl2; Pos. 12: Neutralisation HCl 170 L, Stripping, Sink, Drying and Control Cabinet (1998)Advanced Engineering Pealmaster PM 01 Foil Remover (1998)•Kuttler HS200L Unloader (1998)•Kuttler W180 Turning Station (1998)•


ARTWORK GENERATION

5

ARTWORK GENERATION(2) Hope EG 751 PCB Processors (2011)•(2) Barco Silverwriter MF/860 Plotters (2000)•UHL PS5-MT 01 Film Punch, with Control •Cabinet, PC & MonitorOrbotech PT14 Micro Film AOI (1995)•Microvision ACM 2000 3D Co-ordinate •Measurement Machine mounted on Air Foundations complete with Calibration Kit (2000)Mycrona Magnus I 600 3D Co-ordinate •Measurement Machine, 730x600x300mm capacity (2000)Svecia Type SSM Screen Printer•Vi-Tech UV Dryer with Waxco Index 50/610 •Unloader (2008)

Register now onwww.hilcoind.com

AOI – AUTOMATED OPTICAL INSPECTION • POST ETCH PUNCH


POST ETCH PUNCH LINEKuttler BLP 200 Unloader (2001)•Kuttler W06 Turning Station (1995)•Lauffer MRS-BV Inner Layer Punch System (2001)•Kuttler BUP 200 Loader (2001)•Punch Line•

AOI – AUTOMATEDOPTICAL INSPECTION

(2) Orbotech Spiron 8800 Avip •(2004)Orbotech Spiron 8800 Vip •(2004)Orbotech Spiron 8800 (2004)•(2) Orbotech Inspire 9060-I •(2000)(2) Orbotech IS-9060-AR •(1999/2000)(3) Orbotech VRS-4 LI •(1999/2000)(2) Orbotech VRS 4 •Stereoscope (1999)(2) Orbotech VRS-4I (1999)•Orbotech VRS-4 M (1998)•Orbotech Visa Pro VRS-4I •(1998)


MULTI BOND

7

INNER LAYER MULTIBOND LINE 2Kuttler HSP 200L Unloader with PCB Gripper (1998)•Mac Dermid Equipment Multibond Line consisting of Pos. 1: Infeed; Pos. 2: Cleaner (acid) 295 L; Pos. 3: Cascade Rinser; Pos. 4: Cleaner/Alkaline 295 L;•Pos. 5: Cascade Rinser; Pos. 6: Control; Pos. 7: Pre Dip Tank 700 L; Pos. 8-9: Multi Bond each 1000 L; Pos. 10-11: Cascade Rinser;Pos. 12: Dryer with Control CabinetKuttler HSP 200 Loader with 2 PCB Grippers (1993)•

INNER LAYER MULTIBOND LINE 1Kuttler HSP 200 Unloader with two PCB Grippers (1995)•Mac Dermid Equipment Multibond Line Consisting of Multibond-Line 1, consisting of 9 positions: Pos. 1: infeed; Pos. 2: Cleaner 470 L;•Pos. 3: Cascade Rinser; Pos. 4: Predip Tank each 700 l; Pos. 5-6: Multibond Tank each 1400 L; Pos. 7: Cascade Rinser; Pos. 8: DL-rinsing;Pos. 9: Dryer / Exit with Control Cabinet with Siemens Simatic OP 27 ControlKuttler HSP 200 Loader with PCB Gripping System (1995)•


OEM 7-Station Laminate Press System,•complete with; (5) Hot Oil and (2) Cold Press Stations, each with (8) Platerns, complete with fully Automated Transfer Load and Unload System. Model: OEM 125/10/8, (2001). Complete with (5) GWK Hot Oil Temperature Controls (2001), (5) HAWE Aggregat Hydraulic Power Packs, (5) Busch RA 0205 Vacuum Pumps & (1) LOG Hydraulic Power Pack. Motorized Roller Conveyor In and Out Feed, Extraction System and PLC Controlled. Systemwith Lauffer Entstifteinheit Automatic Board Punch (2002) with Siemens Simatic OP7 PLC Control. Ulrich Rotte Board Feed Alignment Unit and (5) Ulrich Rotte Lay-Up Feed Tables, each with Siemens Simatic OP7 PLC Controls

MULTI LAYER


MULTI LAYER

9

For Further Information Please Contact:

Daniel Gray at+44 (0)8453 130 [email protected]

Martin Kolodziejczyk at+31 (0)20 470 0989

[email protected]

Lauffer 7 Station Laminate Press •System, comprising; (5) Hot Oil and(2) Cold press stations, each with(6) Platerns. Automated In & Out FeedStations (1993 to 1998). Complete with(5) CPS HTT Digital Controlled Temperature Systems, (5) Bosch SH6 (or similar) Hydraulic Power Packs. System with Lauffer Entstifteinheit Automated Board Press (2000) with Siemens Simatic OP7 Control. Ulrich Rotte Board Feed Aligment Unit. (4) Lauer PCS090 Controlled Lay-Up Tables

DRILLING & LASER DRILLING • ROUTING/SCRIBING


DRILLING & LASER DRILLING(6) Posalux Ultra Speed 6000 5-Spindle 125K Spindle Speed, Laser Tool •Check, Posalux controller (2000)(10) Schmoll-Maschinen System XL5-24 5-Spindle Linear 125K Spindle •Speed, Laser Tool Check, Sieb & Meyer Controller (up to 2001)(21) Schmoll-Maschinen System 5/5 5-Spindle 125K Spindle Speed,•Laser Tool Check, Sieb & Meyer Controller (up to 2000)(3) Schmoll-Mashinen System 1 twin 2-Spindle Drilling Machines•Schmoll-Maschinen System 5/Euro 5-Spindle 125K Spindle Speed,•Laser Tool Check, Sieb & Meyer Controller Schmoll-Maschinen System 5 5-Spindle 125K Spindle Speed,•Laser Tool Check, Sieb & Meyer ControllerComet FXS-160.40 SG Feinfocus X-Ray Drill S/N 110918 2119 (2006)•Pluritec Inspectra X-Ray Drill complete with Sieb & Meyer Control (2000), •complete with Spare Parts Package

LASER DRILLS(2) ESI 5320 UV Laser MicroVIA Drills (2002)•ESI 5220 UV Laser MicroVIA Drill (2000)•

ROUTING/SCRIBINGSchmoll-Maschinen System XL6-21R 6-Spindle Linear 125K Spindle •Speed, Laser Tool Check, Sieb & Meyer Controller (2001)(2) Schmoll-Maschinen System 6/5R (System 5) 125K 5-Spindle Speed, •Laser Tool Check, Sieb & Meyer Controller (2000)Schmoll-Mashinen System 1/1 Routing Machine•(2) Klingelnberg MIC 8-50 5 Head Routers•Schmoll-Mashinen 992550 Scribing Machine with Sieb & Meyer CNC •44.00 control (1999)Alfa 1500L/ FBW 50110R Scribing Machine, complete with Sieb &•Meyer CNC 44.00 ControlAqueous Board Cleaning Wash Line•Schmid Combi Etch consisting of Pos. 1: Infeed; Pos. 2: High-Pressure •Cleaner; Pos. 3-4: Rinsing; Pos. 5: Dryer; Pos. 6: Exit, Curved Belt, 1 Transport Belt, Control Cabinet and "TRANSNORM" 5M Conveyor

REDUCE COPPER LINEKuttler HS 200U Destacker with Infeed Conveyor and 2 PCB Gripping Systems (1996)•Schmid 21 Slim Down Line (Cu De-Etching) with Control Cabinet, consisting of•Pos. 1: Infeed; Pos. 2: Pre-Etching; Pos. 3: Etcher; Pos. 4: intermittent; Pos. 5: HCL Rinser; Pos. 6: Cascade Rinser, 4-units; Pos. 7: Ingopor Rinser,110 L; Pos. 8: Cascade Rinser 3-units;Pos. 9: Dryer; Pos. 10: ExitKuttler HS 200L Stacker with Conveyor (1996)•

Full Lot Catalogue and Images Available onwww.hilcoind.com


DE-SMEAR • THROUGH HOLE

11

BRUSHING MACHINEKuttler HS200 Unloader (2001)•Schmid Combiline consisting of Pos. 1: Infeed; Pos. 2-3: •Brushing Units; Pos.4-5: Rinsing; Pos. 6: Drying; Pos. 7: Exit with Accessories, complete with Associated Pumps etc.

BRUSHING/GRINDING MACHINEPola e Massa PLZ650 Brushing/Grinding Line, consisting •of 2 Grinding Stations with each 10 Disc Sanders, Tilting Station, Drying, Exit Conveyor, Storage Place and Control Cabinet. With Schmid Cecumat Copper Centrifugeand associated Waste Water Pump Station (2007)

DESMEAR WASH LINEKuttler HS 200 U Unloader S/N 1989 YOM 1998•Schmid Line consisting of 18 positions:•Pos. 1: Infeed, Pos 2-3-4-5 - Brushing;Pos. 7: UHT-W4; Pos. 8-9-10 - Active bath, 610 L;Pos. 11-12-13: Permanganate, 1000 L;Pos. 15: Reduction Cleaner, 400 L; Pos.16-18TePla 4061 Plasma Desmearing System•

THROUGH HOLEKuttler BL200 Unloader (2001)•Höllmüller Through Hole Line (Wetting of Drill Holes with Cu-Layer / Pre-Treatment Galvanic), consisting of 14 positions: Pos. 1: Infeed; •Pos. 2: Pre-Treatment; Pos. 3: Cascade Rinser 3-units; Pos. 4: Pre-Etching, 4.2: 2 metered tanks Etch Cleaner, 100 L; Pos. 5: Cascade Rinsing 3-units; Pos. 6: Predipping, Metered Tank 100 L; Pos. 7: Activator 330 L; Pos. 8: Cascade Rinser 3-units; Pos. 11: Check-Up; Pos. 12: Chemical Copper, 4-units, 1120 L; Pos. 13: Cascade Rinser 4-units; Pos. 14: Dryer, Control Cabinet, PumpsKuttler BUP200 with PCB Gripper (2001)•

THROUGH HOLE/OUTER LAYER


OUTER LAYER STRIPPING & ETCHING LINEL+H Maschinenbau GmbH HAS66-26IL-OL Unloader (2000)•Circuit Automation 46-04-013 Stripping and Etching Line, for •etching of Cu Layer, consisting of 14 positions: Infeed, Rinsing, WSM 2, (2) Strippers STM (K) 5, Rinsing WMT 3, Cascade Rinser KSM (K) 5, Dryer TKM 4, Etch-Infeed, Etching, Rinsing WSI 3,FAM 2, Cascade Rinser KSM (K) 5, Dryer TKM 4, Exit (2004)L+H Maschinenbau GmbH HES66-26IL-OL (2000)•

OUTER LAYER IMAGING SOCKET PRE-CLEAN LINEKuttler HDS 200 Unloader (1993)•HMS Höllmüller 3462 Pre-Treatment Line consisting of;•Pos. 1. Infeed; Pos. 2. Acid Cleaner; Pos. 3. Cascade Rinser;Pos. 4. Pre-Etching Micro Etch, 485 L; Pos. 5. Cascade Rinser,3-units; Pos. 6. Pickling 196 L; Pos. 7. Cascade Rinser 4-units; Pos. 8. Dryer complete with Digital Control System Power3 x 400 V, 50 Hz, approx 88kWHakuto PH-SGK-02 Pre-heater (2000)•Hakuto MACH-610 T Laminator (1993)•

OUTER LAYER IMAGING LINEKuttler HS200 Unloader (1993)•Schmid Combi Etech Pre-Treatment Line, consisting of Pos. 1: Infeed, •Pos. 2: Pre-Etching module, 176 L; Pos. 3: Cascade Rinser, 4-units;Pos. 4. Pickling 60 L; Pos. 5: Cascade Rinser 3-units; Pos. 6: Dryer (1993)•Kuttler HSP 200 Unloader (1993)•Schmid Combi Developing Line, consisting of Pos. 1: Infeed;•Pos. 2: Rinsing, Contents 280 L, Pos. 3: Developer, Contents 415 L;Pos. 4: developer, Contents 310 L; Pos. 5-6: Cascade Rinsing;

Pos. 7: Rinsing; Pos. 8: Drying; Pos. 9: Exit Conveyor (1998)Hakuto PH-SHK-02 Preheater (2001)•Hakuto Laminator (2006)•Steif 128521205 Resist Drying Buffer•Teknek LCM LDCM0750F Panel Cleaner (1999)•Eigenbau/ Kuttler/ORC 13 Exposure Device (1997)•Techmech SIC 10101 Buffer (2008)•Advanced Engineering PM01 Foil Remover (2001)•


GALVANIC PLATING

13

TEST LINEHuber Industries Manual Electroplating Galvanic ‘Try-Out’ Line for Copper, •consiting of Frame Stripper 200 Ltr, Cleaner 40 Ltr., Etchcleaner 70 Ltr.,Pickling 70 Ltr., Acid Copper Tank 1700 Ltr., Passivation Soda approach (Na1CO3) 1-10 + 70 Ltr., Dryer, Control Cabinet (2007)Heraeus LTU100/150 Electric Drying Oven, 250⁰C, Extraction (1980)•

GALVANIC PLATING LINE 5Ludy Systemtechnik Alpha mvp. consisting of; Load- and Unload Station, Storage Buffer, Dryer, Hot Rinser 1880 Ltr., Flow Rinser 1480 Ltr., consumption •approx 50-60 L/hr, Frame Stripper for Nitric Acid, 460 Ltr., Clip Stripper 1480 Ltr., Galvanic Tank 1480 Ltr., Acid Tin Tank 5000 Ltr., Pickling Tank Sulphuric Acid 1470 Ltr., Degreaser 1860 Ltr., Dip Rinsing Tank 1480 Ltr., Flow Rinsing Tank 1480 Ltr., Pre-Pickling 1869 Ltr., Dip Rinsing Tank after Etching1480 Ltr., Flow Rinsing Tank after Galvanizing approx, 1480 Ltr., Dip Rinsing Tank after Galvanising Approx 1480 Ltr., Pickling Tank 1470 Ltr.,(4) Acid Copper Tanks each 5000 Ltr., (2) Handling Systems type Vicatron LST with Pumps (2002)Complete with PVC Stacking Container, "ENVIOLET" UV-tank (Copper Storage Tank) 5000 Ltr., and Overhead Anode Loading System•

GALVANIC PLATING LINE 2ATOTECH consisting of Handling System, Storage approx. (40) Plates, De-Metalizing Tank 1800 Ltr., Cold Rinsing Tank, Dryer, Hot Rinsing Tank 60 °C, •Cold Water Rinsing Tank, (2) Dip Spraying Cascades, Etching Cleaning Tank 1500 Ltr., (2) Diffuse Rinsers, Transfer, Pickling Sn/Gold 680 Ltr., Acid Tin Tank, Cold Tank 1600 Ltr, Pre-Cold Tank 2700 Ltr., Nickel Tank 1000 Ltr., Nickel Tank 4800 Ltr., Cold Water Spray, Cu-Ni Tank 680 Ltr., Copper Tank 1, 10000 Ltr., Copper Tanks 3 & 4, each 6800 Ltr., Cathode maintenance, (3) Handling Systems, PC and Control Cabinet (1990 with upgrades in 2006)

To Register, and for full Lot Catalogue andImages please visit www.hilcoind.com

GALVANIC PLATING LINE 4ATOTECH Dynaplus 320 Capacity approx.•30 m3/h, consisting of Loading - Un-Loading Station, Storage, Transfer, Dryer,PC Cleaner/Active Tank 2170 Ltr.,Pre-Edging Tank 3170 Ltr., Acid Copper Tank 9500 Ltr. Galvanic Copper Tank 9280 Ltr.,(2) Acid Copper Tanks, each 9500 Ltr., Cathode-maintenance, Transfer,(5) Galvanic Copper Tanks each 9280 Ltr.,Spray Rinsing Tank, (2) Cascade Rinsing Tanks,Dryer, (4) Handling Systems,Lifting Capacity 1500 Kg, Travel Speed 50 m/min,with Accessories and Control Cabinet (2001)Beersschwinger Cu Oxid Preparation Tank for •(via Fill System) (2012)

TIN STRIPPING • SOLDERMASK • MEASUREMENT


TIN STRIPPING LINEKuttler HSP 200 Unloader (1994)•Schmid Combi Line 27 Tin Stripping Line consisting of 8 positions: •Infeed, Stripper, Rinser, Cascade Rinser, Dryer, Exit (2002)Kuttler HS 200 HSP 200 Unloader (1994)•

SOLDER MASK PRE-CLEANING LINEKuttler HSP 200 Unloader (1993)•Höllmüller Pre-Treatment Line Consisting of Pos. 1: inFeed;•Pos. 2: alkaline cleaning, Contents 280 l; Pos. 3: Cascade Rinsing, 4-Units; Pos. 4: Blow Out, Pos. 5: MEC ETCH Conveyer, Contents 400 L, formic acid, CU, Pos. 6: Cascade Rinsing, 3-Units;Pos. 7: HCl pickling, Contents 225 L, Pos. 8: Cascade Rinsing, 3-Units;Pos. 8: Cascade Rinsing, 4-Units; Pos. 9: Dryer;Pos. 10: Exit Conveyor (1999)Schmid 83-89-589 Unloader (1990)•

SOLDER MASK LINECircuit Automation Oven (2004)•Circuit Automation DP 2500 V4.3 Coater (c.2010)•Schmid 84/89/5490 Unloader (1990)•Schmid 813 Loader (1991)•Optical Radiation Corporation Opti Beam Exposure Machine •Schmid 814 Unloader (1991)•Schmid 84-91-260 Loader (1991)•Höllmüller P-SSTM-RY/65 Developing Line, consisting of•Pos. 1: Infeed; Pos. 2: Developer, Contents 280 L; Pos. 3: developer,Contents 480 L; Pos. 4: developer, Contents 310 L;Pos. 5-6: Cascade Rinsing; Pos. 7: Rinsing; Pos. 8: Drying;Pos 9: Exit Conveyor (2000)Schmid 83-89-588 (1989)•Circuit Automation T120 Annealing Furnace, Capacity Approx. 130 •Panels/Hr, Length Heating Aerea Approx, 2500 mm Temp. Max 190° C,Heating Cap. 36 kW, Dimensions Approx. 5080x1537x2477 mmCircuit Automation, Spare Coater (Spares)•

SOLDER MASK VERTICAL COATING LINESchmid 814 Unloader•Circuit Automation 11780 Drying Oven (2000)•(2) Circuit Automation DP 2500 Vertical Coaters, Coating of the Boards,•with digital Control (2001)

SOLDER MASK HEAT TREATMENT LINESchmid 84/89/591 Unloader (1990)•ITC Intercircuit VDS 150C Annealing Oven, Capacity 105 kN, •Length approx. 8 m , With In- and Exit Conveyor, PC and Control Cabinet (2011)Finishing Line Consisting of Pos. 1: Infeed; Pos. 2: Acid Cleaner •Contents 415 L; Pos. 3: Cascade Rinser, 4 Units; Pos. 4: Dryer; Pos. 5: Exit Conveyor (2007)Kuttler HSP 2000 Unloader (1993)•

SOLDER MASK HEAT TREATMENT LINEOptical Radiation Corporation Optibeam 6000 Exposure Machine •with PC and 3no. Monitors (1995)Bacher S109.8917 Exposure Machine (2010)•Bacher S109.8917 Exposure Machine (2007)•


ELECTRICAL TEST • ORGANIC COATING LINE

15

ELECTRICAL TESTATG A2/16 Flying Probe Tester•ATG A2/16a Flying Probe Tester•ATG A2/12 Flying Probe Tester (24x24inch capacity)•ATG A2020 ACCUR (upgraded 2011) Finger Test Machine•ATG A2020 ACCUR Finger Test Machine•(2) ATG A2000 Finger Test Machines•Adaptronic KT630 & KT638 Hi-Pot Testers•(2) Polar CITS900S4 Controlled Impedance Test Systems &•(1) CITS500s SystemLeica & Marzhause Wetzlar Optical Inspection systems•

ORGANIC COATING LINEHöllmüller Maschinenbau GmbH OCC Line for Pre-Treatment of E-Test, •Contact Problem Avoidance, Protection of Cu-Coating against corrosion, working width approx. 700 mm, power 80kW, 400 V. consisting of13 positions: Pos. 1: Infeed; Pos. 2: Cleaner 150 L; Pos. 3: Cascade Rinser, 3-units; Pos. 4: Pre-Etching 160 L; Pos. 5: Cascade Rinser 3-units;Pos. 6: Pickling 125 L; Pos. 7: Cascade Rinser 4-units; Pos. 8: Blow-out; Pos. 9: Passivating 175 L; Pos. 10: Blow-out; Pos. 11: Cascade rinser5-units; Pos. 12: Dryer; Pos. 13: Exit S/N 2825/1-13.2 (2000)Complete with; Transnorm System V101908 1x10M Curved Belt Conveyor •(2000)

MEASUREMENTOptek Model V2800X Innervision X-Ray Inspection & Measurement System (1998)•

TOOLROOM


TOOLROOMDeckel FP4NC Toolroom Milling Machine•Grundig Electronic Control, 530mm x 900mm Table, ToolingDeckel FP3 Toolroom Milling Machine•Heidenhain ND780 DRO, 420mm x 800mm Table,375mm x 800mm Table, ToolingWeisser Heilbronn Junior 410 x 1100mm Centre Lathe (1985)•Heidenhain ND780 DRO, ToolingSchaublin 125 x 500mm Centre Lathe•Heidenhain DRO, Multifix Tool Post, ToolingRAS 83.16 3mm x 1640mm Mechanical Guillotine•RAS 60.12 1.75mm x 1280mm Manual Folder•Boschert LB12K4 Notching Machine (1990)•Geibel & Hotz FS40C Surface Grinder (1995)•200mm x 400mm Electro-Magnetic ChuckKasto HBS 250/280 Hacksaw (1995)•Mossner Rekord SSF/350 Vertical Bandsaw•Ideal Blade Welder, 500mm x 600mm TableKaltenbach TL350 Alloy Circular Saw (1995)•Infeed Measuring Conveyor

Ulmia 1612 Woodworking Table Saw (1974)•Nilfisk Dust Extraction UnitAlzmetall AB4SJ Heavy Duty Drill•Aciera 13 High Speed Drill•Flott 16 Pedestal Drill•Rema WS04/175 Double Ended Bench Grinder•Solid DS2 Double Ended Bench Grinder•Mafac BS100 100mm x 1000mm Horizontal Linisher (1986)•7.5-15m/sec, Mafac SS2 Extraction UnitFeinmechanik Drill Point Grinder•MHG SMG45/1 Hand Blast Cabinet (2010)•Schmidt 32kN Pneumatic Press•Eurotronic TIG 2202 AC/DC Welding Set•Eurotronic MAG 2500 EC Welding Set•Hydrobull ITI500N Counterbalance Workshop Crane (2010)•

Large Quantity of Machinery Spares to include Motors, ReductionGearboxes, Electrical, Valves, Aluminium Bar, Racking, Engineers Benches,Vices, Hand Tools


GOODS IN & OUT • SITE SERVICES

17

GOODS IN & OUTSpeedy Packer SP3 Foam-In-Bag Packaging System (2004)•Kallfass KC5050/600 Shrink Tunnel Sealer (1981)•Kallfass KC8060/650 Universal Shrink Tunnel Sealer (2000)•(2) Gwinner Euromat 45-15-495-8 Storage Systems (1993)•Zebra 170xiII Label Printer•Inauen-Maschinen Vacuum Sealers•

FILTER PRESSESMSE Type MFP 800-35-25K-P-L-S-SG+NPE Max Closing Pressure•380 Bar, Max Feed Pressure 15 Bar (1998)Schenk Type KFP 630/30, Working Pressure 15 Bar,•Working Temperature 40 ⁰C (1989)MSE KPF 630-40-25K-HDZ-S Max Closing Pressure 380 Bar,•Max Feed Pressure 15 Bar (1993)MSE KPF 470-40-25K-MPN, Max Closing Pressure 340 Bar,•Max Feed Pressure 15 Bar (2009)3 Netzsch Height 14, Design Pressure 15 Bar/U,•Operating Pressure Bar U/30⁰C (1993)

AIR COMPRESSORSAtlas Copco ZR4 Packaged Air Compressor Hrs: 65,807•(3) Atlas Copco ZR3 Packaged Air Compressors Hrs: •67,372/41,472/82,812(3) Atlas Copco FD280 Air Dryers•Atlas Copco MD4 HPS Air Dryer•Sabroe Boreas 460 Air Dryer•

(2) Lohenner GmbH & Co 3,000/2,000 Ltr Air Receivers •(2) Römer 782 948 9,000/3,000 Ltr Air Receivers•(2) Dataclima Weiss DATA 220.2 CWV 24KVA Chiller units•

ELECTRICAL EQUIPMENT(15+) 12KV-1.1KV Transformer Sets, ranging from 630 to 1,250KVA•Equipment Specific Electrical Switch Gear Control Panels•MAN AR125D15000 6-Cylinder 125KVA Generator,•with Siemens Alternator Hrs: 593Vanguard D+E9BSV 9KVA V-Twin Wheeled Generator•

OTHER EQUIPMENT(25+) Automated Paternoster Storage carousel systems•(200+) Full Height Boltless racking bays•(1,000+) Stacking Board Trays•Pink VT850-950-850-5, 120⁰C Vacuum Drying Oven (1994)•Qty Jungheinrich Battery Powered Pedestrian Pallet Trucks•Qty Manual Hydraulic Pallet Trucks•Still R20-15 3-Wheel Counterbalance Battery Fork Lift Truck (1996)•Aerogo BN64 Air Skate System•1250kg Suspended Travelling Gantry System,•2 x ABUS 625kg Electric HoistsHydraulic Loading Bay•

LARGE QUANTITY OF OFFICE FURNITURE ANDCOMMERCIAL KITCHEN & CANTEEN EQUIPMENT

HILCO INDUSTRIAL ONLINE AUCTION

IN CONJUNCTION WITH:

www.cbiworld.com

3 St. Helen’s Place | London EC3A 6AB | UKTel +44 (0)8453 130 140 | Fax +44 (0)8453 130 150

www.hilcoind.com

OFFICES WORLDWIDE: Australia • Canada • China • Mexico • Singapore • Thailand • United States • United Kingdom

Assets Formerly Owned by Multek Europe Multilayer Technology GmbH & Co. KG

Rigid PCB BoardManufacturing Facility

September 2013Böblingen, Germany

rigid pcb board manufacturing facility...rigid pcb board manufacturing facility 3 st. helen’s...

Documents