ring sizing format options - foroworld.com · ring sizing format options author: vincy mathew...

4
RING SIZING GUIDE OPTION 1: MEASURING AN EXISTING FINGER 1.Select and exis/ng ring that fits the desired finger. 2.Measure the internal diameter of the ring (in mm) 3.Use the below chart to determine your ring size. OPTION 2: MEASURE YOUR FINGER 1. Wrap a strip of paper around your finger where you'd like your ring to be. 2. Make sure that the paper is pulled snug to your finger, the /ghter the beGer, to find your best fit. 3. Mark the spot where the paper meets and measure the distance with a ruler (mm). 4. Use the below chart to determine your ring size. RING SIZE 9 10 11 12 13 14 15 CIRCUMFERENCE (MM) 49 50.0 50.9 51.8 52.8 54.0 55 INTERNAL DIAMETER (MM) 15.6 15.9 16.2 16.5 16.8 17.2 17.5 DETERMINING WHAT FORO RING YOU SHOULD ORDER Narrow / Band Rings should fit snugly at the base of the finger but also wide enough to fit the widest part of the finger. (e.g.: Knuckle) Wide Rings (6 mm + wide )should be worn a bit looser than narrow / band rings. It is recommended to add one size to accommodate for extra width. Please Note: If your knuckle is larger than the base of your finger ● Measure your knuckle size ● Measure your Ring Size i.e base of the finger ● Pick a size between the Two A FEW NOTES TO CONSIDER: 1. Measure your fingers at the end of the day when they’re at their largest. 2. Cold weather can shrink your fingers up to half a size, so make sure they’re warm. 3. Lastly, alcohol and salt can make your fingers swell, so refrain from measuring them aXer cocktails and appe/zers.

Upload: others

Post on 20-Jul-2020

9 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ring sizing format options - foroworld.com · ring sizing format options Author: Vincy Mathew Created Date: 8/5/2019 1:11:35 PM

     RING  SIZING  GUIDE

   OPTION  1:-­‐  MEASURING  AN  EXISTING  FINGER

1.Select  and  exis/ng  ring  that  fits  the  desired  finger.2.Measure  the  internal  diameter  of  the  ring  (in  mm)3.Use  the  below  chart  to  determine  your  ring  size.

             OPTION  2:-­‐  MEASURE  YOUR  FINGER

1.  Wrap  a  strip  of  paper  around  your  finger  where  you'd  like  your  ring  to  be.2.  Make  sure  that  the  paper  is  pulled  snug  to  your  finger,  the  /ghter  the  beGer,  to  

find  your  best  fit.3.  Mark  the  spot  where  the  paper  meets  and  measure  the  distance  with  a  ruler  (mm).

4.  Use  the  below  chart  to  determine  your  ring  size.

RING  SIZE 9 10 11 12 13 14 15

CIRCUMFERENCE  (MM) 49 50.0 50.9 51.8 52.8 54.0 55

INTERNAL  DIAMETER  (MM)

15.6 15.9 16.2 16.5 16.8 17.2 17.5

DETERMINING  WHAT  FORO  RING  YOU  SHOULD  ORDERNarrow  /  Band  Rings  should  fit  snugly  at  the  base  of  the  finger  but  also  wide  enough  

to  fit  the  widest  part  of  the  finger.  (e.g.:  Knuckle)Wide  Rings  (6  mm  +  wide  )should  be  worn  a  bit  looser  than  narrow  /  band  rings.  It  is  

recommended  to  add  one  size  to  accommodate  for  extra  width.

Please  Note:  If  your  knuckle  is  larger  than  the  base  of  your  finger●  Measure  your  knuckle  size

●  Measure  your  Ring  Size  i.e  base  of  the  finger●  Pick  a  size  between  the  Two

A  FEW  NOTES  TO  CONSIDER:-­‐1.  Measure  your  fingers  at  the  end  of  the  day  when  they’re  at  their  largest.

2.  Cold  weather  can  shrink  your  fingers  up  to  half  a  size,  so  make  sure  they’re  warm.3.  Lastly,  alcohol  and  salt  can  make  your  fingers  swell,  so  refrain  from  measuring  them  

aXer  cocktails  and  appe/zers.

Page 2: ring sizing format options - foroworld.com · ring sizing format options Author: Vincy Mathew Created Date: 8/5/2019 1:11:35 PM

 NECKLACE  SIZING  GUIDE

To  measure  your  desired  necklace  length,  follow  the  below  instruc/ons:-­‐  Use  a  measuring  tape  or  a  regular  ruler  to  measure  the  piece  of  string.you  may  also  gauge  where  a  necklace  will  fall  be  viewing  our  size  chart.  

                     

ORDER  SIZE CHAIN  SIZE  (INCHES) CHAIN  SIZE  (CENTIMETERS)

15.5”   15.5”  (Adjustable  from  14.5”-­‐16.5”)

39.37

16.5”   16.5”  ((Adjustable  from  15.5”-­‐17.5”)

41.91

17.5”   17.5”  (Adjustable  from  16.5”-­‐18.5”)

44.45

KINLDY  NOTE  :  -­‐  The  necklace  is  secured  by  a  spring  ring  which  allows  you  to  adjust  the  length  by  1”  +  or  -­‐  the  ordered  size.                

Page 3: ring sizing format options - foroworld.com · ring sizing format options Author: Vincy Mathew Created Date: 8/5/2019 1:11:35 PM

BRACELET  SIZING  GUIDE

 OPTION  1:-­‐  MEASURING  YOUR  WRIST  WITH  MEASURING  TAPE

To  find  your  perfect  bracelet  size,  follow  these  steps:-­‐1.Measure  your  wrist  with  a  flexible  tape  measuring  tape  or  a  ribbon  just  below  the  wrist  bone,  

where  you  would  normally  wear  the  bracelet.  2.If  you  using  a  plain  ribbon,  mark  the  mee/ng  point  where  it  overlaps  to  form  a  full  circle  with  

a  pen  or  pencil  then  use  to  measure  the  length.  that  would  be  your  wrist  size.  3.To  find  your  bracelet  size,  just  add  your  wrist  size  with  the  appropriate  FITTING  STYLE  

measurements  below.  Eg.  if  your  wrist  measure  is  5.5”  and  you  want  a  snug  fit  just  add  1/2”  and  your  bracelet  size  would  be  a  SIZE  6

MEASURING  YOUR  WRIST  WITH  TAPE

MEASURING  YOUR  WRSIT  WITH  RIBBON

ORDER  SIZE CHAIN  SIZE  (INCHES) CHAIN  SIZE  (MM)

Size  6 6”(  ADJUSTABLE  FROM  5.5”-­‐6.5”)

152.4

Size  7 7”  (ADJUSTABLE  FROM  6.5”  -­‐7.5”)

177.8

Size  8 8”  (ADJUSTABLE  FROM  7.5”  -­‐8.5”)

203.2

OPTION  2:-­‐  MEASURING  YOUR  WRIST  WITH  WRIST  SIZER  TAPE

To  check  the  size  of  your  wrist,  print  the  bracelet  size  guide  and  follow  instruc/ons  to  find  our  what  size  is  best  for  you.

WRIST  SIZE  GUIDE  -­‐  CLICK  TO  PRINT

A  FEW  NOTES  TO  CONSIDER:-­‐1.  Measure  your  wrist  at  the  end  of  the  day  when  they’re  at  their  largest.

2.  Cold  weather  can  shrink  your  wrist,  so  make  sure  they’re  warm.

Do  you  want  a  snug  or  loose  fit?  Well,  that  really  will  vary  between  each  individual.If  you  are  buying  a  delicate  bracelet  with  a  thin  chain,  we  suggest  doing  a  snug  fit.  Most  other  

bracelets  should  be  worn  as  comfort  fit

FITTING  STYLE  (add  inches  to  your  wrist  size)Snug  Fit  -­‐  Add  1/4"  to  1/2"Comfort  Fit  -­‐  Add  3/4"  to  1"

Loose  Fit  -­‐  Add  1  1/4"

Page 4: ring sizing format options - foroworld.com · ring sizing format options Author: Vincy Mathew Created Date: 8/5/2019 1:11:35 PM

   BANGLE  SIZING  GUIDE

 OPTION  1:-­‐  MEASURING  YOUR  EXISTING  BANGLE

Measure  the  inner  diameter  of  a  bangle  you  own.  Using  the  following  chart  determine  your  bangle  size.

BANGLE  SIZE  (ANNA) DIAMETER  (MM

2-­‐4 57.20

2-­‐5 58.70

2-­‐6 60.30

OPTION  2:-­‐  MEASURING  YOUR  WRIST  WITH  A  MEASURING  TAPE

To  determine  your  bangle  size,  simply  tuck  your  thumb  into  the  palm  of  your  hand  (as  if  about  to  put  on  a  bangle)  and  use  a  measuring  tape  or  a  ribbon.  

1. Measure  your  hand  all  the  way  around  the  set  of  knuckles  closest  to  your  wrist  knuckle  to  knuckle.  Be  sure  to  pull  the  ribbon  or  measuring  tape  snug  against  your  skin.  Mark  

the  ribbon  with  a  pen  and  measure  it  with  a  ruler.2.    Use  the  following  chart  to  determine  your  bangle  size.

BANGLE  SIZE  (ANNA) CIRCUMFERENCE    (MM)

CIRCUMFERENCE  (INCHES)

2-­‐4 179.6 7.06

2-­‐5 184 7.25

2-­‐6 189.5 7.46

A  FEW  NOTES  TO  CONSIDER:-­‐1.  Measure  your  wrist  at  the  end  of  the  day  when  they’re  at  their  largest.

2.  Cold  weather  can  shrink  your  wrist,  so  make  sure  they’re  warm.