ROUTING DYNAMICMenggunakan Routing Information Protocol (RIP)

RIPv2

Konfigurasi R1Router>enRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#interface fastEthernet 0/1 -> menjadi gateway untuk hostRouter(config-if)#ip address 192.168.1.1 255.255.255.0Router(config-if)#no shutdownRouter(config-if)#ex

Router(config)#interface fastEthernet 0/0 -> menjadi jalur ke R2Router(config-if)#ip address 10.0.0.1 255.0.0.0Router(config-if)#no shutdownRouter(config-if)#ex

konfigurasi RIPv2 R1( kita menggunakan RIPv2, perbedaan RIPv1 dan RIPv2 adalah kemampuan untuk merouting jaringan yang disubnetting/VLSM sedangkan RIPv1 tidak bisa, tapi kita menggunakan RIPv2 meski kita tidak melakukan VLSM pada jaringan yang ada )

Router(config)#router ripRouter(config-router)#version 2 -> untuk mengaktifkan RIPv2Router(config-router)#network 192.168.1.0 - > memasukan alamat network atau net ID yang terhubung langsung dengan R1Router(config-router)#network 10.0.0.0Router(config-router)#exRouter(config)#ex

Konfigurasi R2Router>enRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#interface fastEthernet 0/1 -> menjadi gateway untuk hostRouter(config-if)#ip address 172.16.0.1 255.255.0.0Router(config-if)#no shutdownRouter(config-if)#ex

Router(config)#interface fastEthernet 0/0 -> menjadi jalur ke R1Router(config-if)#ip address 10.0.0.2 255.0.0.0Router(config-if)#no shutdownRouter(config-if)#ex

konfigurasi RIPv2 R2Router(config)#router ripRouter(config-router)#version 2Router(config-router)#network 10.0.0.0Router(config-router)#network 172.16.0.0Router(config-router)#exRouter(config)#ex

untuk memastikan apakah RIPv2 sudah berfungsi, ketikkan perintah show ip route pada R1R1#sh ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route

Gateway of last resort is not setC 10.0.0.0/8 is directly connected, FastEthernet0/0R 172.16.0.0/16 [120/1] via 10.0.0.2, 00:00:11, FastEthernet0/0 <- routing ke network 172.16.0.0/16C 192.168.1.0/24 is directly connected, FastEthernet0/1R1#

show ip route pada R2R2#sh ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route

Gateway of last resort is not setC 10.0.0.0/8 is directly connected, FastEthernet0/0C 172.16.0.0/16 is directly connected, FastEthernet0/1R 192.168.1.0/24 [120/1] via 10.0.0.1, 00:00:16, FastEthernet0/0 <- routing ke network 192.168.1.0/24R2#