rolling, torque, and angular momentum chapter 11 copyright © 2014 john wiley & sons, inc. all...
TRANSCRIPT
Copyright © 2014 John Wiley & Sons, Inc. All rights reserved.
Rolling, Torque, and Angular Momentum
Chapter 11
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-1 Rolling as Translation and Rotation Combined
11.01 Identify that smooth rolling can be considered as a combination of pure translation and pure rotation.
11.02 Apply the relationship between the center-of-mass speed and the angular speed of a body in smooth rolling.
Learning Objectives
Figure 11-2
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-1 Rolling as Translation and Rotation Combined
We consider only objects that roll smoothly (no slip) The center of mass (com) of the object moves in a
straight line parallel to the surface The object rotates around the com as it moves The rotational motion is defined by:
Figure 11-3
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-1 Rolling as Translation and Rotation Combined
The figure shows how the velocities of translation and rotation combine at different points on the wheel
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-1 Rolling as Translation and Rotation Combined
Figure 11-4
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-1 Rolling as Translation and Rotation Combined
Figure 11-4
Answer: (a) the same (b) less than
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-2 Forces and Kinetic Energy of Rolling
Combine translational and rotational kinetic energy:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-2 Forces and Kinetic Energy of Rolling
If a wheel accelerates, its angular speed changes
A force must act to prevent slip
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-2 Forces and Kinetic Energy of Rolling
If slip occurs, then the motion is not smooth rolling! For smooth rolling down a ramp:
1. The gravitational force is vertically down
2. The normal force is perpendicular to the ramp
3. The force of friction points up the slope
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-2 Forces and Kinetic Energy of Rolling
We can use this equation to find the acceleration of such a body
Note that the frictional force produces the rotation Without friction, the object will simply slide
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-2 Forces and Kinetic Energy of Rolling
Answer: The maximum height reached by B is less than that reached by A.
For A, all the kinetic energy becomes potential energy at h.
Since the ramp is frictionless for B, all of the rotational K stays rotational, and only the translational kinetic energy becomes potential energy at its maximum height.
11-3 The Yo-Yo
As yo-yo moves down string, it loses potential energy mgh but gains rotational & translational kinetic energy
Find linear acceleration of yo-yo accelerating down its string:
1.Rolls down a “ramp” of angle 90°
2.Rolls on an axle instead of its outer surface
3.Slowed by tension T rather than friction
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-3 The Yo-Yo
Replacing the values leads us to:
Example Calculate the acceleration of the yo-yo
o M = 150 grams, R0 = 3 mm, I
com = Mr2/2 = 3E-5 kg m2
o Therefore acom
= -9.8 m/s2 / (1 + 3E-5 / (0.15 * 0.0032)) = - .4 m/s2
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-4 Torque Revisited
Previously, torque was defined only for a rotating body and a fixed axis
Now we redefine it for an individual particle that moves along any path relative to a fixed point
The path need not be a circle; torque is now a vector Direction determined with right-hand-rule
Figure 11-10
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-4 Torque Revisited
The general equation for torque is:
We can also write the magnitude as:
Or, using the perpendicular component of force or the moment arm of F:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-4 Torque Revisited
Answer: (a) along the z direction (b) along the +y direction (c) along the +x direction
Loosen a bolt
• Which of the three equal-magnitude forces in the figure is most likely to loosen the bolt?
• Fa?
• Fb?
• Fc?
Loosen a bolt
• Which of the three equal-magnitude forces in the figure is most likely to loosen the bolt?
• Fb!
Copyright © 2012 Pearson Education Inc.
Torque
• Let O be the point around which a solid body will be rotated.
O
Copyright © 2012 Pearson Education Inc.
Torque
• Let O be the point around which a solid body will be rotated.
• Apply an external force F on the body at some point.
• The line of action of a force is the line along which the force vector lies. F applied
Line of action
O
Copyright © 2012 Pearson Education Inc.
Torque
• Let O be the point around which a body will be rotated.
• The lever arm (or moment arm) for a force
is
The perpendicular distance from O to the line of action of the force
Line of action
O
L
F applied
Copyright © 2012 Pearson Education Inc.
Torque
Line of action
O
• The torque of a force with respect to O is the product of force and its lever arm.
t = F L
• Greek Letter “Tau” = “torque”
• Larger torque if
• Larger Force applied
• Greater Distance from O
L
F applied
Copyright © 2012 Pearson Education Inc.
Torque
t = F L
Larger torque if
• Larger Force applied
• Greater Distance from O
Copyright © 2012 Pearson Education Inc.
Torque
Line of action
O
• The torque of a force with respect to O is the product of force and its lever arm.
t = F L
• Units: Newton-Meters
• But wait, isn’t Nm = Joule??
L
F applied
Copyright © 2012 Pearson Education Inc.
Torque
• Torque Units: Newton-Meters
• Use N-m or m-N
• OR...Ft-Lbs or lb - feet
• Not…
• Lb/ft• Ft/lb• Newtons/meter• Meters/Newton
Copyright © 2012 Pearson Education Inc.
Torque
• Torque is a ROTATIONAL VECTOR!
• Directions:
• “Counterclockwise” (+)
• “Clockwise” (-)
• “z-axis”
Copyright © 2012 Pearson Education Inc.
Torque
• Torque is a ROTATIONAL VECTOR!
• Directions:
• “Counterclockwise”
• “Clockwise”
Copyright © 2012 Pearson Education Inc.
Torque
• Torque is a ROTATIONAL VECTOR!
• Directions:
• “Counterclockwise” (+)
• “Clockwise” (-)
• “z-axis”
Copyright © 2012 Pearson Education Inc.
Torque
• Torque is a ROTATIONAL VECTOR!
• But if r = 0, no torque!
Copyright © 2012 Pearson Education Inc.
Torque as a vector
• Torque can be expressed as a vector using the vector cross product:
t= r x F
• Right Hand Rule for direction of torque.
Copyright © 2012 Pearson Education Inc.
Torque as a vector
• Torque can be expressed as a vector using the vector cross product:
t= r x F
• Where r = vector from axis of rotation to point of application of Force
q = angle between r and F
• Magnitude: t = r F sinq
F applied
Line of action
O r
Lever arm
q
Copyright © 2012 Pearson Education Inc.
Torque as a vector
• Torque can be evaluated two ways:
t= r x F
t= r * (Fsin q)
remember sin q = sin (180-q)
F applied
Line of action
O r
Lever arm
q
Fsinq
Copyright © 2012 Pearson Education Inc.
Torque as a vector
• Torque can be evaluated two ways:
t= r x F
t= (rsin q) * F
The lever arm L = r sin q F applied
Line of action
O r
Lever arm
r sin q
q
Copyright © 2012 Pearson Education Inc.
Torque as a vector
• Torque is zero three ways:
t= r x F
t= (rsin q) * F
t= r * (Fsin q)
If q is zero (F acts along r)
If r is zero (f acts at axis)
If net F is zero (other forces!)
F applied
Line of action
O r
Lever arm
r sin q
q
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-4 Torque Revisited
Example Calculating net torque:
Figure 11-11
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-5 Angular Momentum
Angular counterpart to linear momentum
Note that particle need not rotate around O to have angular momentum around it
Unit of angular momentum is kg m2/s, or J s
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-5 Angular Momentum
To find direction of angular momentum, use right-hand rule to relate r & v to the result
To find magnitude, use equation for magnitude of a cross product:
This is equivalent to:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-5 Angular Momentum
Angular momentum has meaning only with respect to a specified origin and axis.
L is always perpendicular to plane formed by position & linear momentum vectors
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-5 Angular Momentum
Angular momentum has meaning only with respect to a specified origin
It is always perpendicular to the plane formed by the position and linear momentum vectors
Answer: (a) 1 & 3, 2 & 4, 5
(b) 2 and 3 (assuming counterclockwise is positive)
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-6 Newton's Second Law in Angular Form
We rewrite Newton's second law as:
Torque and angular momentum must be defined with respect to the same point (usually the origin)
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-6 Newton's Second Law in Angular Form
We rewrite Newton's second law as:
Note the similarity to the linear form:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-6 Newton's Second Law in Angular Form
Answer: (a) F3, F
1, F
2 & F
4 (b) F
3 (assuming counterclockwise is positive)
© 2014 John Wiley & Sons, Inc. All rights reserved.
Sum to find angular momentum of a system of particles:
The rate of change of the net angular momentum is:
11-7 Angular Momentum of a Rigid Body
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-7 Angular Momentum of a Rigid Body
The rate of change of the net angular momentum is:
In other words, net torque is defined by this change:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-7 Angular Momentum of a Rigid Body
We can find the angular momentum of a rigid body through summation:
The sum is the rotational inertia I of the body
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-7 Angular Momentum of a Rigid Body
Therefore this simplifies to:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-7 Angular Momentum of a Rigid Body
Answer: (a) All angular momenta will be the same, because the torque is the same in each case (b) sphere, disk, hoop
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-8 Conservation of Angular Momentum
Since we have a new version of Newton's second law, we also have a new conservation law:
The law of conservation of angular momentum states that, for an isolated system,
(net initial angular momentum) = (net final angular momentum)
11-8 Conservation of Angular Momentum
Since these are vector equations, they are equivalent to the three corresponding scalar equations
This means we can separate axes and write:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-8 Conservation of Angular Momentum
If the distribution of mass changes with no external torque, we have:
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-8 Conservation of Angular Momentum
Examples A student spinning on a stool: rotation speeds up when arms
are brought in, slows down when arms are extended A springboard diver: rotational speed is controlled by tucking
her arms and legs in, which reduces rotational inertia and increases rotational speed
A long jumper: the angular momentum caused by the torque during the initial jump can be transferred to the rotation of the arms, by windmilling them, keeping the jumper upright
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-8 Conservation of Angular Momentum
Answer: (a) decreases (b) remains the same (c) increases
Copyright © 2012 Pearson Education Inc.
The race of the rolling bodies
• Which one wins??
• WHY???
Copyright © 2012 Pearson Education Inc.
Acceleration of a yo-yo
• We have translation and rotation, so we use Newton’s second law for the acceleration of the center of mass and the rotational analog of Newton’s second law for the angular acceleration about the center of mass.
• What is a and T for the yo-yo?
Copyright © 2012 Pearson Education Inc.
Acceleration of a rolling sphere
• Use Newton’s second law for the motion of the center of mass and the rotation about the center of mass.
• What are acceleration & magnitude of friction on ball?
Copyright © 2012 Pearson Education Inc.
Work and power in rotational motion
• Tangential Force over angle does work
• Total work done on a body by external torque is equal to the change in rotational kinetic energy of the body
• Power due to a torque is P = zz
Copyright © 2012 Pearson Education Inc.
Work and power in rotational motion
• Calculating Power from Torque
• Electric Motor provide 10-Nm torque on grindstone, with I = 2.0 kg-m2 about its shaft.
• Starting from rest, find work W down by motor in 8 seconds and KE at that time.
• What is the average power?
Copyright © 2012 Pearson Education Inc.
Work and power in rotational motion
• Calculating Power from Force
• Electric Motor provide 10-N force on block, with m = 2.0 kg.
• Starting from rest, find work W down by motor in 8 seconds and KE at that time.
• What is the average power?
• W = F x d = 10N x distance travelled
• Distance = v0t + ½ at2 = ½ at2
• F = ma => a = F/m = 5 m/sec/sec => distance = 160 m
• Work = 1600 J; Avg. Power = W/t = 200 W
Copyright © 2012 Pearson Education Inc.
Angular momentum • The angular momentum of a rigid body rotating about a
symmetry axis is parallel to the angular velocity and is given by L = I.
• Units = kg m2/sec (“radians” are implied!)
• Direction = along RHR vector of angular velocity.
Copyright © 2012 Pearson Education Inc.
Angular momentum • For any system of particles = dL/dt. • For a rigid body rotating about the z-axis z = Iz.
Turbine with I = 2.5 kgm2; w = (40 rad/s3)t2
What is L(t) & L @ t = 3.0 seconds; what is t(t)?
Copyright © 2012 Pearson Education Inc.
Conservation of angular momentum
• When the net external torque acting on a system is zero, the total angular momentum of the system is constant (conserved).
Copyright © 2012 Pearson Education Inc.
Angular momentum in a crime bust
• A bullet (mass = 10g, @ 400 m/s) hits a door (1.00 m wide mass = 15 kg) causing it to swing. What is w of the door?
Copyright © 2012 Pearson Education Inc.
Angular momentum in a crime bust
• A bullet (mass = 10g, @ 400 m/s) hits a door (1.00 m wide mass = 15 kg) causing it to swing. What is w of the door?
• Lintial = mbulletvbulletlbullet
• Lfinal = Iw = (I door + I bullet) w
• Idoor = Md2/3
• I bullet = ml2
• Linitial = Lfinal so mvl = Iw
• Solve for w and KE final
Copyright © 2012 Pearson Education Inc.
Gyroscopes and precession
• For a gyroscope, the axis of rotation changes direction. The motion of this axis is called precession.
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-9 Precession of a Gyroscope
A non-spinning gyroscope falls
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-9 Precession of a Gyroscope
A spinning gyroscope instead rotates around a vertical axis
This rotation is called precession
Copyright © 2012 Pearson Education Inc.
Gyroscopes and precession
• For a gyroscope, the axis of rotation changes direction. The motion of this axis is called precession.
Copyright © 2012 Pearson Education Inc.
A rotating flywheel
• Magnitude of angular momentum constant, but its direction changes continuously.
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-9 Precession of a Gyroscope
Angular momentum of (rapidly spinning) gyroscope is:
Torque can only change direction of L, not magnitude
Only way direction can change along direction of torque without its magnitude changing is if it rotates around the central axis
Therefore it precesses instead of toppling over
© 2014 John Wiley & Sons, Inc. All rights reserved.
11-9 Precession of a Gyroscope
The precession rate is given by:
True for a sufficiently rapid spin rate Independent of mass, (I is proportional to M) but does
depend on g Valid for a gyroscope at an angle to the horizontal as
well (a top for instance)