roro vessel - iwai

16
DATA SHEET NW-1 Vessels Vessel RoRo RoRo Vessel August 2017 Page 1/3

Upload: others

Post on 26-Oct-2021

30 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RoRo Vessel - IWAI

DATA SHEET NW-1 Vessels Vessel RoRo

RoRo Vessel

August 2017 Page 1/3

Page 2: RoRo Vessel - IWAI

DATA SHEET NW-1 Vessels Vessel RoRo

Main dimensions

Cargo type RoRo

Hull type RoRo

Length o.A. L 70.00 m

Breadth moulded B 14.50 m

Breadth main deck B oA 15.54 m

Depth Main Deck D 2.80 m

Draught max. T 1.70 m

Lightweight estimate 710 t

Payload at Tmax 757 t

Air draft in operation max 9.50 m

Applicable regulations

Powering

2

Propeller diameter DP 1.44 m

Del. total power Pd 900 kW 450 kW per engine

Rate of rev. n [1/min] 390

Diesel marine engine 500 kW in rating A (heavy, uninterrupted duty)

Vessel built according to Rules and Regulations for the Construction and Classification of Inland Waterways Ships by the Indian Register of Shipping, or to corresponding regulations of internationally approved classification society.

Applicable rules of IWAI for navigation on NW-1, from Diamond Harbour (West Bengal) to Allahabad (Uttar Pradesh). Main operation sector are reaches upstream of Farakka.

Number of Propellers (in nozzles)

Reversible gear box

0

100

200

300

400

500

600

700

800

900

1000

0,00 2,00 4,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00

Water depth h = 5,00 , Draught T = 1,60

Water depth h = 3,50 , Draught T = 1,60

Water depth h = 2,50 , Draught T = 1,60

Water depth h = 2,00 , Draught T = 1,30

2 x 450 kW

August 2017 Page 2/3

Page 3: RoRo Vessel - IWAI

DATA SHEET NW-1 Vessels Vessel RoRo

Capacity

Trucks as RoRo on the main deck, on 5 parking lanes

Truck capacity: 18 trucks280 m Total parking lane length

Allowable axle loads: 10.2 t per single axle, dual tyres

18.0 t per tandem axleAllowable truck weight: 42.0 t Semi-Trailer Truck type

44.0 t Truck-Trailer combinationDeck plating 12 mm, stiffeners bulb profile 160 x 80 x 10 mm

Hinged ramps an both ends of the vesselAllowable truck weight and axle load as for the main deckLength of the ramp: 8.00 mBreadth of the ramp: 8.00 mLifting device for the ramp with cables and whinches

Provisions

Diesel Oil 30 tFresh Water 10 tLub Oil 2 tSludge 5 tBallast Water 200 t in two tanks

Black Water 9 t

Equipment

• Two bow anchors, each 790 kg

• One stern anchor 395 kg

Accommodation

Weight calculation results for major components

550 t65 t55 t40 t

Sum 710 t

Electric load requirements

Diesel driven genset, 60 kW output Three-phase AC supply to anchor winches220 V supply to accomadation220 V supply to AC accomodation24 V emergency circuit

Steel weigth, longt. FramingAccomodationMachinery & outfittingRamp installation

Twin rudder blades with high efficiency profiles behind each propeller. Bow thruster with vertical propeller shaft, propeller diameter 0.80 m. Diesel engine drive, 150 kW.

Accomodation on main deck and below main deck for crew of 8 persons

August 2017 Page 3/3

Page 4: RoRo Vessel - IWAI

Main Dimensions

Lenght PP : 70.000 m

Breadth moulded : 14.500 m

Draught design : 1.700 m

Breadth over all : 15.540 m

Lenght o A : 86.000 m

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

9

9

10

10

A A

B B

C C

D D

E E

F F

G G

NAME

Design.

Check.

Appr.

DATE/SIGN.

Scale Size Project/Newbuilding Drawing number Rev. Page

COPYRIGHT 2017-08-23. NO PART OF THIS

DOCUMENT MAY BE REPRODUCED OR UTILIZED

BY ANY MEANS OR SHOWN TO A THIRD PERSON

WITHOUT PERMISSION IN WRITING

LINESPLAN

M2066/RORO

RoRo Trucks

GUES 2017-08-23

1/1 M2066

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115

Page 5: RoRo Vessel - IWAI

-10 0 10 20 30 40 50 60 70 80 90 100 110 120 130

-10 0 10 20 30 40 50 60 70 80 90 100 110 120 130

-10 0 10 20 30 40 50 60 70 80 90 100 110 120 130

PROP MRA MMF

TANKDECK

MAINDECK

PROFILE

Total lenght of the lanes = 280 m

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

9

9

10

10

11

11

12

12

13

13

14

14

15

15

16

16

17

17

18

18

19

19

20

20

21

21

22

22

23

23

24

24

A A

B B

C C

D D

E E

F F

G G

H H

I I

J J

K K

L L

M M

N N

O O

P P

NAME

Design.

Check.

Appr.

DATE/SIGN.

Scale Size Project/Newbuilding Drawing number Rev. Page

COPYRIGHT 2016-01-05. NO PART OF THIS

DOCUMENT MAY BE REPRODUCED OR UTILIZED

BY ANY MEANS OR SHOWN TO A THIRD PERSON

WITHOUT PERMISSION IN WRITING

General Arrangement Plan

RORO

NW1

Gu 2017-07-06

1/... 2017-07-06 1

Main Dimensions

Lenght PP : 70.000 m

Breadth moulded : 14.500 m

Draught design : 1.700 m

Breadth over all : 15.540 m

Navigation zone 3

Capacity 18 Trucks

Lenght o A : 86.000 m

Page 6: RoRo Vessel - IWAI

Main Dimensions

Lenght PP : 70.000 m

Breadth moulded : 14.500 m

Draught design : 1.700 m

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A

17 18 19 20 21 22 23 24

A

B BC

CD

D

E E

F F

G G

H H

I I

J J

K K

L L

M M

N N

O O

P P

NAME

Design.

Check.

Appr.

DATE/SIGN.

Scale Size Project/Newbuilding Drawing number Rev. Page

COPYRIGHT: NO PART OF THIS DOCUMENT MAY BE

REPRODUCED OR UTILIZED BY ANY MEANS OR SHOWN

TO A THIRD PERSON WITHOUT PERMISSION IN WRITING

RoRo Vessel Gu 2015-11-30

G 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Breadth over all : 15.540 m

Navigation zone 3

Void Cell

Bilge 8 mm

Frame distance 1800 mm

Support

tu

be 1

08 x

8 m

m

Main Section

RoRo Vessel - Main Frame and Scantling

10 mm

300 x

7 m

mF

lange 1

00 x

10 m

m

680 680 680 6802040 1360 500

340

2800

14500

Support

tu

be 1

08 x

8 m

m

Allowable axle loads: 10,2 t per single axle, dual tyres

18,0 t per tandem axle

Allowable truck weight: 42,0 t Semi-Trailer Truck type

44,0 t Truck-Trailer combination

300 x 7 mmFlange 100 x 12 mm

L 160 x 80 x 14, a = 340 mm

Pl 10 mm Pl 10 mm

Trus

s pr

ofile

UNP 1

40

Truss profile UNP 140

Tru

ss p

rofil

e U

NP 1

40

Support

tu

be 1

08 x

8 m

m

Deck plate 12 mm

Sie

de p

late

8 m

m

7 mm

7250

L 100 x 50 x 10

580 x 10 mm

Flange 100 x 10 mm

Bottom plate 8 mm

L 1

00 x

50 x

10

580

Void Cell

Support tu

be 1

08 x

8 m

m

Pl 10 mmPl 10 mm

Truss profile UNP 140

Truss profile U

NP 14

0

Support tu

be 1

08 x

8 m

m

Flange 100 x 10 mm

Date 22.08.2017

L 120 x 80 x 10

180

580

580

Page 7: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 1

RORO VESSEL

PROJECT INFO

L x B = 70.00 x 14.5 m

Project M2066/RORO, 2017-08-23

LOADING CASES

-------------------------------------------------------------

NAME TEXT DISP T TR

t m m

-------------------------------------------------------------

1-LIGHTSHIP 733.00 0.898 -0.816

2-FULL_LOAD 1453.00 1.703 -0.003

3-PART_LOAD 1093.00 1.312 0.017

-------------------------------------------------------------

Page 8: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 2

LOADING CONDITION 1-LIGHTSHIP

L O A D I N G C O M P O N E N T S

-----------------------------------

Max. Center of gravity Free s.

Name weight Mass cgx cgy cgz moment

-------------------------------------------------------------------------

Diesel Oil, RHO=0.860

-------------------------------------------------------------------------

DOF DO fore 3.5 3.00 61.20 0.00 1.34 0.00

DOA DO aft 23.1 20.00 31.50 0.00 1.62 23.30

-------------------------------------------------------------------------

Total of DO 26.5 23.00 35.37 0.00 1.59 23.30

Deadweight 23.0 35.37 0.00 1.59 23.3

Lightweight 710.0 31.27 0.00 1.64

Displacement (rho=1.000) 733.0 31.40 0.00 1.63 23.3

FLOATING POSITION

Draught moulded 0.898 m KM 19.33 m

Trim -0.816 m KG 1.63 m

Heel, PS=+ 0.0 deg

TA 1.306 m GM0 17.70 m

TF 0.490 m GMCORR -0.03 m

Trimming moment -3182 tonm GM 17.66 m

Height of the wheelhouse top above waterline: 9.2 m

Page 9: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 3

Loading casel 1-LIGHTSHIP,

00 10 20 30 40 5050

Heeling angle (deg)

HPHI

0

1

2

3

4

Righting lever (m)

EPHI

LOADING CONDITION 1-LIGHTSHIP

------------------------------------------------------

HEEL MS HPHI EPHI FSMOM DGZ

deg m m mrad tm m

------------------------------------------------------

0.0 0.000 0.00 0.000 0.0 0.000

5.0 -0.005 1.53 0.068 2.0 0.003

10.0 -0.242 2.83 0.261 4.1 0.006

15.0 -0.993 3.58 0.544 6.2 0.009

20.0 -2.120 3.92 0.874 8.5 0.012

30.0 -4.921 3.91 1.566 12.0 0.016

40.0 -7.822 3.54 2.219 12.8 0.018

50.0 -10.562 2.98 2.789 12.5 0.017

------------------------------------------------------

Page 10: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 4

Loading casel 1-LIGHTSHIP,

0 50 100

FRAME

-2000

-1000

0

1000

2000

Bending moment (tm)

-100

0

100

Shear force (t)

-20

-10

0

10

20

Weight distribution (t/m)

BEND SHEAR WD BD

LOADING CONDITION 1-LIGHTSHIP

--------------------------------------------------

X FR BEND SHEAR WD BD

m # tm t t/m t/m

--------------------------------------------------

0.000 0.00 57 16 9.41 0.00

6.000 10.00 302 66 14.54 6.85

12.000 20.00 823 101 19.00 15.91

18.000 30.00 1417 84 7.96 15.91

24.000 40.00 1789 40 7.92 14.90

30.000 50.00 1909 1 14.63 13.89

36.000 60.00 1903 -12 7.85 12.87

42.000 70.00 1747 -40 7.81 11.86

48.000 80.00 1444 -61 7.78 10.84

54.000 90.00 1033 -76 7.74 9.39

60.000 100.00 566 -78 7.70 6.61

66.000 110.00 182 -48 9.33 2.47

--------------------------------------------------

Page 11: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 5

LOADING CONDITION 2-FULL_LOAD

L O A D I N G C O M P O N E N T S

-----------------------------------

Max. Center of gravity Free s.

Name weight Mass cgx cgy cgz moment

-------------------------------------------------------------------------

Diesel Oil, RHO=0.860

-------------------------------------------------------------------------

DOF DO fore 3.5 3.00 61.20 0.00 1.34 0.00

DOA DO aft 23.1 20.00 31.50 0.00 1.62 23.30

-------------------------------------------------------------------------

Total of DO 26.5 23.00 35.37 0.00 1.59 23.30

Deadweight 743.0 38.69 0.00 4.89 23.3

Lightweight 710.0 31.27 0.00 1.64

Displacement (rho=1.000) 1453.0 35.07 0.00 3.30 23.3

FLOATING POSITION

Draught moulded 1.703 m KM 11.37 m

Trim -0.003 m KG 3.30 m

Heel, PS=+ 0.0 deg

TA 1.705 m GM0 8.07 m

TF 1.701 m GMCORR -0.02 m

Trimming moment -16 tonm GM 8.05 m

Height of the wheelhouse top above waterline: 8.65 m

Page 12: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 6

Loading casel 2-FULL_LOAD,

00 10 20 30 40 5050

Heeling angle (deg)

HPHI

0

0.5

1

1.5

2Righting lever (m)

EPHI

LOADING CONDITION 2-FULL_LOAD

------------------------------------------------------

HEEL MS HPHI EPHI FSMOM DGZ

deg m m mrad tm m

------------------------------------------------------

0.0 0.000 0.00 0.000 0.0 0.000

5.0 -0.006 0.70 0.029 2.0 0.001

10.0 0.097 1.50 0.126 4.1 0.003

15.0 -0.233 1.85 0.275 6.2 0.004

20.0 -0.887 1.87 0.439 8.5 0.006

30.0 -2.488 1.54 0.740 12.0 0.008

40.0 -4.136 1.04 0.967 12.8 0.009

50.0 -5.695 0.48 1.100 12.5 0.009

------------------------------------------------------

Page 13: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 7

Loading casel 2-FULL_LOAD,

0 50 100

FRAME

-2000

-1000

0

1000

2000

Bending moment (tm)

-100

0

100

Shear force (t)

-20

0

20

Weight distribution (t/m)

BEND SHEAR WD BD

LOADING CONDITION 2-FULL_LOAD

--------------------------------------------------

X FR BEND SHEAR WD BD

m # tm t t/m t/m

--------------------------------------------------

0.000 0.00 53 16 9.41 1.06

6.000 10.00 281 67 20.93 12.37

12.000 20.00 806 101 26.49 23.74

18.000 30.00 1394 83 16.55 24.77

24.000 40.00 1751 37 17.61 24.77

30.000 50.00 1850 -3 25.34 24.76

36.000 60.00 1820 -16 19.74 24.76

42.000 70.00 1639 -43 20.80 24.75

48.000 80.00 1316 -63 21.86 24.75

54.000 90.00 890 -77 22.92 24.11

60.000 100.00 431 -71 23.98 20.08

66.000 110.00 156 -26 9.33 11.37

--------------------------------------------------

Page 14: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 8

LOADING CONDITION 3-PART_LOAD

L O A D I N G C O M P O N E N T S

-----------------------------------

Max. Center of gravity Free s.

Name weight Mass cgx cgy cgz moment

-------------------------------------------------------------------------

Diesel Oil, RHO=0.860

-------------------------------------------------------------------------

DOF DO fore 3.5 3.00 61.20 0.00 1.34 0.00

DOA DO aft 23.1 20.00 31.50 0.00 1.62 23.30

-------------------------------------------------------------------------

Total of DO 26.5 23.00 35.37 0.00 1.59 23.30

Deadweight 383.0 43.29 0.00 4.80 23.3

Lightweight 710.0 31.27 0.00 1.64

Displacement (rho=1.000) 1093.0 35.49 0.00 2.74 23.3

FLOATING POSITION

Draught moulded 1.312 m KM 13.79 m

Trim 0.017 m KG 2.74 m

Heel, PS=+ 0.0 deg

TA 1.304 m GM0 11.05 m

TF 1.320 m GMCORR -0.02 m

Trimming moment 71 tonm GM 11.03 m

Height of the wheelhouse top above waterline: 9.04 m

Page 15: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 9

Loading casel 3-PART_LOAD,

00 10 20 30 40 5050

Heeling angle (deg)

HPHI

0

1

2

3Righting lever (m)

EPHI

LOADING CONDITION 3-PART_LOAD

------------------------------------------------------

HEEL MS HPHI EPHI FSMOM DGZ

deg m m mrad tm m

------------------------------------------------------

0.0 0.000 0.00 0.000 0.0 0.000

5.0 0.000 0.96 0.041 2.0 0.002

10.0 0.071 1.99 0.170 4.1 0.004

15.0 -0.148 2.71 0.379 6.2 0.006

20.0 -0.928 2.84 0.624 8.5 0.008

30.0 -2.907 2.61 1.104 12.0 0.011

40.0 -4.967 2.12 1.519 12.8 0.012

50.0 -6.929 1.52 1.838 12.5 0.011

------------------------------------------------------

Page 16: RoRo Vessel - IWAI

DST Duisburg LOADING CONDITIONS DATE 2017-08-23

NW1 TIME 11:29

USER GUES

M2066/RORO Page 10

Loading casel 3-PART_LOAD,

0 50 100

FRAME

-2000

-1000

0

1000

2000

Bending moment (tm)

-100

0

100

Shear force (t)

-20

-10

0

10

20

Weight distribution (t/m)

BEND SHEAR WD BD

LOADING CONDITION 3-PART_LOAD

--------------------------------------------------

X FR BEND SHEAR WD BD

m # tm t t/m t/m

--------------------------------------------------

0.000 0.00 55 16 9.41 0.00

6.000 10.00 300 66 15.36 7.60

12.000 20.00 822 101 20.89 17.94

18.000 30.00 1411 84 10.92 18.99

24.000 40.00 1774 38 11.95 19.02

30.000 50.00 1883 -1 19.64 19.04

36.000 60.00 1863 -15 14.01 19.06

42.000 70.00 1691 -42 15.04 19.08

48.000 80.00 1375 -63 16.07 19.10

54.000 90.00 950 -77 17.10 18.53

60.000 100.00 483 -75 18.13 15.20

66.000 110.00 164 -34 9.33 8.14

--------------------------------------------------