rotex controls usa: valve automation 101
TRANSCRIPT
![Page 1: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/1.jpg)
AUTOMATION OVERVIEW
EMCISA TrainingNovember 4 -6 2013
![Page 2: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/2.jpg)
STANDARDS
N - NAMURI - I.S.0. 5210/5211V - VDI/VDE 3845
V
V
I
N
N
BOTTOM MOUNTING PAD
TOP MOUNTING PAD
SOLENOID MOUNTING PAD
N
N
Standards
I.S.O. 9000 Series.
I.S.O. 5210 / 5211 Valve Automation Standards.
N.A.M.U.R. Actuation Standards.
V.D.I. / V.D.E. Accessory Standards.
![Page 3: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/3.jpg)
Pneumatic Actuators are
offered in several different
Designs
![Page 4: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/4.jpg)
Advantages:
Simplistic Design.
Rugged.
Torque curve mirrors the Valve characteristics.
Inexpensive for
torque output.
![Page 5: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/5.jpg)
Advantage:
Low cost.
Long History.
Disadvantage:
Does not comply with International Standards.
Torque curve is opposite of Valve characteristics.
![Page 6: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/6.jpg)
Advantages:
Low Cost
Disadvantages:
Not suited for safe spring return design
Uneven O-Ring wear
Does not comply with International Standards
![Page 7: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/7.jpg)
Advantages:
Sold for control.
Disadvantages:
Large Envelope
Heavy
Unbalanced Mounting
Does not comply with International Standards
![Page 8: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/8.jpg)
Advantages:
Compact Design.
Evenly Balanced.
Light Weight.
Complies with International Standards.
Ease of adapting Accessories.
![Page 9: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/9.jpg)
1
23
4 5
6
7
Typical On/Off Automated Valve Package
Valve Cost = 30% of total package
Automation Cost = 70% of total package
# Item Cost as % of
Total Package
2”
Advantages
Hytork
Typical
Valve Dist.
1 Switch 14% Equal or
Greater
Equal or Lesser
2 Bracket 1% Equal or
Greater
Equal or Lesser
3 Conduit 1% Greater Lesser
4 Solenoid 13% Equal or
Greater
Equal or Lesser
5 Actuator 23% Greater Lesser
6 Main Bracket &
Coupling
9% Equal or Lesser Equal or
Greater
7 Valve 30% Equal or Lesser Equal or
Greater
Item Cost as % of
Total Package
Advantages
Hytork
Typical
Valve Dist.
Labor & Handling 9% Equal Equal
Speed of response N/A Equal or Lesser Equal or
Greater
Automated Valve Package Breakout
![Page 10: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/10.jpg)
Typical 1/4-Turn
Modulating
Control Valve Package
Approx. Cost of 3” “V”- notch 1/4-turn = $3000.00
Typical Conventional
Modulating
Globe Valve Package
Automated Valve Package Breakout
Approx. Cost of 3” Globe= $4000.00
![Page 11: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/11.jpg)
End of travel indicating Limit Switches
Used to indicate the final
position of a valve.
Local indication uses a
visual indicator.
Remote indication uses
electrical switches.
Is used as a controller for additional equipment or as a junction house to I/O.
![Page 12: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/12.jpg)
Types of Solenoid Valves
Three Way (Spring return Actuators)
Normally Closed Construction -exhausts pressure when solenoid is de-
energized, applies pressure when energized.
Normally Open Construction -applies pressure when solenoid is de-energized,
exhausts pressure when energized.
Universal Construction -for normally closed or normally open operation.
Four Way (Double Acting Actuators)
Single Solenoid -valve shifts when solenoid is energized, returns to normal position
when de-energized.
Dual Solenoid -valve shifts when one solenoid is energized, returns when the other
is energized. May be energized momentarily or continuously.
![Page 13: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/13.jpg)
![Page 14: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/14.jpg)
COIL DE-ENERGIZED COIL ENERGIZED
AS THE SPRINGS MOVE THE PISTONS TOWARDS EACH OTHER A
PARTIAL VACUUM IS CREATED IN THE SPRING CHAMBERS.
THE EXHAUSTING AIR FROM BETWEEN THE PISTONS IS FORCED
INTO THE APRING CHAMBERS PREVENTING THE ATMOSPHERIC
AIR ENTERING THE ACTUATOR
PISTONS MOVING TOGETHER UNDER SPRING FORCE
PISTONS PUSHED APART BY THE AIR
PRESSURE FORCING AIR FROM THE
SPRING CHAMBERS TO EXHAUST TO
ATMOSPHERE.
![Page 15: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/15.jpg)
TRAVEL STOPS
3°
3°
7°
7°
96°
90°
76°
OVERTRAVEL
0°
OVERTRAVEL
TRAVEL ADJUSTMENT
ROTATION
PINION
![Page 16: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/16.jpg)
Speed Control
![Page 17: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/17.jpg)
Automated Valve Failure
• Valve Leaks-By.
• Actuator not stroking properly.
• Valve will not change position.
• No Limit Switch Indication.
![Page 18: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/18.jpg)
Valve Leaks
• Is the Solenoid Functional ?• Test the Coil.
• Test the spool valve in the solenoid.
• Is the Actuator Traveling 90º ?• Adjust the travel stops.
– Improperly adjusted travel stops or no travel stops will cause valve seat failure.
![Page 19: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/19.jpg)
Actuator not cycling full Stroke
• Air blow-by at the pinion.
– Caused by actuator to valve misalignment.
– Caused by high cycle fatigue.
• Air bleeding through the solenoid exhaust port.– Piston “O”-Ring failure.
• Build up of valve corrosion.– Slow down in cycle time.
– Eventual stroke travel limitation.
• On spring return (Fail Position)
– Broken or Fatigued Springs.
![Page 20: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/20.jpg)
Actuator does not Stroke
• Insufficient air supplyCheck supply pressure with gauge
• Actuator mounted incorrect on valveRemove actuator from valve, check that both are in the
same position before mounting.
• Control components not workingReplace faulty component.
• Required torque greater than sizing torqueResize actuator
![Page 21: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/21.jpg)
Actuator strokes too slow
• Control components too small Cv
Install larger components
• Insufficient volume to actuator
Increase size of supply lines
• Clogged breathers, filters or exhaust port silencers
Check and clean, or replace
• Incorrect speed control settings
Adjust speed controls
![Page 22: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/22.jpg)
Actuator strokes too fast
• Control components too large Cv
Install speed controls
• Too much torque
Lower the supply pressure
• No speed control components
Install speed controls
![Page 23: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/23.jpg)
Actuator strokes jerky
• Insufficient volume supply
Increase supply
• Insufficient torque
Increase supply pressure
Check actuator sizing
Actuator may need overhaul
• Defective valve
Consult valve manufacturer’s documentation
![Page 24: ROTEX Controls USA: Valve Automation 101](https://reader034.vdocuments.net/reader034/viewer/2022052212/55a9e40f1a28abfb728b4643/html5/thumbnails/24.jpg)
No Limit Switch Indication
• Enclosure is full of water.
• Corrosion on the contacts.
• Cams have vibrated of setting.
• Broken Wire.