rt7000
TRANSCRIPT
-
7/23/2019 RT7000
1/8
Eika Tronic
Eika-Tronic A.S. communication systems
RT7000THE TOTAL SYSTEM
SOLUTION FOR YOUR TACTICAL
HF COMMUNICATION REQUIREMENTS
-
7/23/2019 RT7000
2/8
RT7000 Transceiver
The EiKa-Tronic RT7000 Series is an advanced transceiver system which
provides the total system solution for all your tactical HF requirements.
The system is rugged, reliable, and easy to use. It provides long distance voice and data transmission
capability over the 1.6-30 MHz high frequency (HF) range at power levels up to 1000 W . The
knowledge and experience gained from 20 years in the HF radio business was used to develop this
completely new product family which utilizes the very latest in electronic and packaging technologies.
Using multiple microprocessors and new technologies such as Digital Signal Processing (DSP)and
Direct Digital Synthesis (DDS), the RT7000 provides built-in features such as Automatic Link
Establishment, Voice Enhancement, and Encryption. These powerful technologies and features have
been carefully balanced with the need for ease of operation, high reliability, simple maintenance, and
affordability.
-
7/23/2019 RT7000
3/8
La serie RT7000 es un sistema transreceptor de
tecnologa avanzada el cual provee la solucin tota
a nivel de sistema para todo requerimiento de atlas
frecuenc ias (H.F.) tacticas.
1. 256 Channel Memory (Expandable to 1000)
2. Plug-in Modular Circuitry
3. Custom Liquid Crystal Display4. 1.6 to 30 MHz in 10-Hz Step5. Full Alphanumeric Keypad
6. Computer Interface and Printer Port
7. Full Remote Control
ISDN FSK Computer Control
8. Multimode Operation
SSB CW FSK AME
9. Plug-In Options 7000 FED-STD-1045 ALE 7000 TC TRANSCALL ALE 7000 VEM DSP-based Voice
Enhancement
7000 ENCR High Level Encryption10. Dual Audio Connectors
11. 100% Continuous Duty Rating12. Expansion Ports for Options
13. Ruggedized Immersible Construction
El sistema es de uso rudo, confiable, y de fcil uso. El radio
proporciona la capacidad de larga distancia, transmision de voz y
datos en el rango de altas frecuencias de 1.6 a 30 MHz con potencia
hasta 1000 vatios. Transworld ha utilizado sus conocimientos y
experiencia de ms de 20 aos en el campo de las comunicaciones
de H.F para desarrollar esta nueva y completa familia de productos l
cual utiliza la ms avanzada tecnologa electrnica disponible en la
actualidad.
Mediante el uso de multiples microprocesadores y nuevas
tecnologas, tal como el D.S.R (procesador digital de seal) y D.D.S(sintetizacin-digital-dfrecta), el RT7000 es capaz de provee
establecimiento de enlace automtico y encripcin. stas alta
tecnologas y valiosas capacidades han sido logradas manteniendo
una fcil operacin, alta confiabilidad, fcil mantenimiento y bajo costo
de adquisicin.
Lmetteur-rcepteur srie RT7000 est un
systme avant-gardiste totalement intgr
rpondant Iensemble de vos besoins en
matire de transmissions HF tactiques.Fiable, robuste, et facile utiliser, ce systme permet la transmission
de la voix et des donnes sur de grandes distances dans la plage des
hautes frquences (1,6 30 MHz) des niveaux de puissance jusqu'a
1000 W. Grce son savoir-faire et son exprience, fruits de 20
annes de travail dans Ie domaine de la transmission HF, Transworld
a pu mettre au point cette toute nouvelle gamme de produits tirant Ie
maximum des plus rcents dveloppements en matire dlectroniqu
et de mise sous botier.
Lutilisation de nombreux microprocesseurs et de nouvelle
technologies telles que Ie traitement des signaux numriques (DSP
et la synthse directe des signaux (DDS), Imetteur-rcepteu
RT7000 est en mesure d'offrir notamment I'tablissement automatiquede liaison et Ie chiffrement des donnes. Ces remarquables perce
technologiques s'quilibrent parfaitement la facilit de
fonctionnement, la fiabilit, la facilit d'entretien et au bas prix de
I'appareil.
-
7/23/2019 RT7000
4/8
RT7000 Features
Ruggedized ConstructionThe RT7000 has been fully ruggedized to meet a wide variety of
stringent military specifications. The unit is fully sealed, dustproof,
waterproof, and immersible to 1 m. Temperature range, humidity
shock, and vibration tolerances meet or exceed U.S. MIL-STD-810E.
Multimode CapabilitiesAll standard modes, including USB, LSB, CW, and AME, are available.
A wideband data option is provided for high-speed data capability
Full Line of AccessoriesTo meet a wide variety of systems applications, the RT7000 familyincorporates a full line of accessories including Power Amplifiers (400
and 1000 W), Digital Antenna Tuners, Remote Controls, Power
Supplies, etc.
12- and 28-Volt ModelsThe RT7000 is available in both 12- and 28-V models for use in both
military and commercial vehicles. Full protection is provided against
reverse polarity over/under voltage, power surges and spikes.
Reliable Multi-Level Power AmplifierOutput power is conservatively rated at 125-W PEF, 100-W average,
in continuous keydown operation. Three front-panel-programmable
levels are available which default to 5, 20, and 125 watts. Complete
VSWR protection is provided.
Advanced Receiver DesignDesigned to cope with today's crowded, noisy HF spectrum, the
RT7000's receiver performance is on a par with most dedicated
surveillance receivers.
Microprocessor ControlTwo high-performance processors are used to control the operation of
the RT7000.
Direct Digital SynthesizerAn advanced fast-switching DDS circuit is the heart of the RT7000synthesizer. It provides a low-noise and spurious output, and permitsfast scanning and high resolution. Although 10-Hz channel spacing isstandard, the synthesizer is capable of operating in 1-Hz steps forspecial applications.
Alphanumeric KeypadThe fully waterproofed, front-panel keypad has full alphanumeric
capabilities as standard, offering not only channel and frequency
input, but also text message composition.
Alphanumeric DisplayThe RT7000 has a high-resolution, backlit, custom LCD display which
indicates channel number, frequency time, clarifier offset, mode, and
relative signal strength/output power, as well as the status of the
installed options. Two alphanumeric lines display the BITE status
sub-menu data, and can also be used to compose or receive ALE
orderwire or data messages. A24-hour clock/timer is optional.
Modular ConstructionThe utilization of a "no-harness, full plug-in" packaging concept
permits easy field-level repair and upgrades, as well as quick
installation of any option card.
BITE Capabil ity Automatic BITE capability with fault isolation to the lowest repairabl
unit (LRU), is standard in the RT7000. BITE status messages, which
cover a variety of possible failure modes, are presented on the display
This allows even unskilled operators to troubleshoot the radio easily a
the field level.
-
7/23/2019 RT7000
5/8
RT7000 Options
Remote-Contro l Capability A variety of remote-control capabilities are offered. An extended front
panel control can be used as a controller for short distance operation.
Full-function remote control is available using either the ISDN protocol
(medium distances) or FSK tones (unlimited distances) over any
voice-grade 2- or 4-wire line. The RT7000 is also capable of full
computer control utilizing a variety of interface standards.
Dual ALE Capability OptionsIn addition to the widely used and cost-effective TRANSCALL system
the RT7000 also offers a full FED-STD-1045 (MIL-STD-188-141A
compatible Automatic Link Establishment (ALE) system which
provides advanced features such as high-speed scanning, sounding
link-quality analysis, and send/receive orderwire message capability
Both of these ALE options provide selective calling as well as "best
available-channel" selection.
DSP Voice EnhancementThe optional plug-in Digital-Signal Processor (DSP) Voice
Enhancement option reduces the effects of various types of noise and
interference on voice communications.
High Level Encryption OptionThis plug-in option provides high-level digital encryption of both voice
and low speed data communications. It is interoperable with thepopular TCC 9000 series.
-
7/23/2019 RT7000
6/8
RT7000 Specifications. .
GENERALFrequency Range: Receive: 100 kHz- 30 MHz
Transmit: 1.6 to 30 MHz
Channel Spacing: 10Hz, Standard.Channels: 256 standard, expandable to 1000.Frequency Entry: Keypad-controlled microprocessor.Display: Backlit alphanumeric LCD, 8 digit.Tuning: Up and Down pushbuttons, variable
frequency steps.Scanning: Multiple scan groups; operator
selectable scan rates.
Antenna Impedance: 50 ohms, Type N connector.Frequency Stability: 1 ppm -30 to 60 C; optional TCXO
.01 ppm.Operating modes: J3E (USB, LSB), H3E (AME), J2A
(CW standard); simplex or semiduplex.
Duty Cycle: Continuous.Input Power: +13.8 Vdc, nominal; 11.0 to 15.5
Vdc, operational.+28 Vdc option: +28 Vdc nominal;20.0 to 32 Vdc, operational.
Inpute Power Protection: Reverse polarity, transient andunder/over voltage.
COMSEC: Compatible with various COMSECunits.
. .
TRANSMITTERPower Output: 125 W PEP, 100/25/10 W average
(100% duty cycle); three levels,programmable from front panel.
Intermodulation: -32 dB.Harmonics: -60 dB, 2 to 30 MHz.Carrier Suppression: -50 dBSideband Suppression: -55 dBMetering: LCD graph, relative output.VSWR Protection: Protected against antenna mismatch
including open and short circuit.SLC: Less than 1 dB increase for 20 dB
increase in audio output.Audio Input: 150 ohms, VOGAD for constant
audio level, 600 ohms 0 dBM (rearpanel).
Audio Bandwidth: 300 to 2700 Hz (300 to 3100 Hzoptional).
.
RECEIVERClarifier: Digital 600 Hz in 10 Hz steps.Receiver Protection: Can withstand +43 dBm input withou
damage.Metering: LCD bar graph, relative signa
strength.Sensitivity: 10 dB SINAD min., for 0.50 V inputIF Rejection: -80 dB.Selectivity: SSB: 300-2700 Hz at -3 dB, 300
3100 Hz optional.Spurious: FED-STD-1045.
Attenuator: +20 dB switchable.Noise Blanker: Optional, pulse type.
Audio: 5 W min. into 4 ohms.High-level Audio: 0 dBm into 600 ohms.
AGC: Not more than 3 dB change in audiooutput for input signals from 103 to+13 dBm.
Squelch: Syllabic (standard)
.
ENVIRONMENTALTemperature, Operating: -30 to +60 C.Temperature, Storage: -40 to +70 C.Humidity: 95% at 50 C for 48 hours.Enclosure: MIL-STD-810E Method 512.
(Submersion to 3 ft. for 2 hours).Vibration:* MIL-STD-810E Method 512.2 (5-20
Hz for 16.5 hours total in 3 axes).
Shock:* Per MIL-STD-810E.*With Shock mount.
.
OPTIONS, INTERNAL
ALE: Full-function FED-STD-104operational from front panel.
Encryption: High- or medium-level voice or data.Noise Blanker: Impulse Noise type.High Stability: 0.1 ppm, -30 to +60 C.
Adaptive: TRANSCALL/SELCALL, RT100compatible; TRANSADAPT,PRC1099A compatible.
Remote control: Extended control unit for mobileoperation. Full-function remote forlong distances (both feature full ALEcapability); computer control.
Specifications subject to change without notice.Measurements made at 13.8 Vdc or 28 Vdc.
+-
-
7/23/2019 RT7000
7/8
System Specifications. .
RAT7000 Antenna TunerFrequency Range: 1.6-30 MHz (2-30 MHz operation
with 4.5 m antenna).Antennas: Whips: 15-35 ft (4.6-10.7m).
Long Wires: 75-150 ft (23-46m).Rated RF Input Power: 150 W PEP.Tuning Time: Typically 2 Seconds.Primary Power: 12 Vdc at 1.5A(Peak), or 600 mA
(average).Temperature Range: -30 C to +60 C.Size (H x W x D): 3 x 12 x 16 in (7.5 x 30 x 40 cm).Weight: 6 lbs (2.8 kg).Memory Channels: Stores tune information on 100
channels in non-volatile memory.Memory Tuning Rates: 20 ms (follows radio scan mode).Memory Retuning: Automatically stores new information
each time channel is retuned.
. .
UPF7000 Switching Power SupplyInput: 85-240 Vac, 50/60 Hz.Output: 13.8 Vdc, 20 A average and peak, or
28 Vdc, 10 A average and peak.Duty cycle: 100%Over Voltage: Set at 16 V set at 33 V.Temperature: 0 - 50 C.Size (H x W x D) 3.4 x 5.0 x 9.5 in (9 x 13 x 24 cm).
. .
UPS500 Power SupplyPrimary Voltage: 115/230 10% (jumper selectable).Primary Current: 6 A (230 V), 12 A (115 V).Frequency: 50 Hz/60 Hz (jumper selectable).
DC output Voltage: 28-33 Vdc (5-40 A).Size (H x W x D): 8.75 x 19 x 17 in. (22 x 48 x 43 cm)Weight: 90 lbs (40 kg).
. .
UPS1000SWA Switching Power SupplyPrimary Voltage: 180-265 VACPrimary Current: 12 A (220 VAC).Frequency: 50 Hz/60 Hz.DC output Voltage: 28 (100A).
. .
RAT1000 Antenna TunerFrequency Range: 1.6-30 MHz.
Antennas: Whips: 16 ft (4.9 m) 3-30 MHz, 32 ft(10.7 m) 2-30 MHz
Long Wires: 75-150 ft (23-46m).Rated RF Input Power: 1000 W PEP Average.Tuning Time: Typically less than 3 Seconds.Primary Power: 28 Vdc 4 A(Peak) 1.8 A (average).Temperature Range: -30 C to +55 C.Size (H x W x D): 13.4 x 19.3 x11.8 in (34 x 49 x 30
cm).
Weight: 49 lbs (22 kg).Memory Channels: Stores tune information on 10
channels in non-volatile memory.Memory Tuning Time: 200 ms from memory.Memory Retuning: Automatically stores new information
each time channel is retuned usingradios tune button.
.
RA400 400-W Ampl ifierPower Output PEP: 400 W PEP minimum, FSK 400 W,
Average CW/FSK.Modes: SSB/FSK (continuous duty
operation).Intermodulation Distortion: -30 dB typical.Frequency Range: 2-30 MHz (1.6-2 MHz with reduced
harmonic specifications).Harmonics: -50 dB typical.Output Impedance: 50Power Requirements: SSB: 28 Vdc 20 A avg.
FSK: 28 Vdc 30-40 A avg.Cooling: Convection plus fan actuated by
75C thermostat.Size(H x W x D): 6 x 14.4 x 16.4 in. (15 x 36 x 42 cm).Weight: 45 lbs (20.4 kg).
.
RA1000 1000-W AmplifierPower Output: 1000 W PEP SSB, 1000 W Avg.
FSK, and CWDuty Cycle: continuous transmit.Intermodulation Distortion: -30 dB typical (dependent on
exciter).Harmonics: -60 dBPower Requirements: SSB: 28 V, 40 A avg. FSK: 28 V,
60-80 A avg.Circuit Breaker: 100 A Magnetic.Weight: 60 lbs (27.3 kg).Size(H x W x D): 12.5x15.3x17 in. (15x36x42 cm).Rack Mount (HxW): 8.75x19.0 in (22x48 cm).
.
RT9200 Datacom TerminalSize(H x W x D): 5.1 x 12.6 x 17.1 in. (13 x 32 x 43.5
cm).Weight: 16 lbs (7.3 kg)Operating Power: 10-32 Vdc, 50 W maximum (with disk
drive). Optional AC supply.Protocols: CW, RTTY (Baudot/ASCll),
SITOR/ARQ/FEC/SELFEC (PerCCIR 476-2), CCIR 625, GTOR.Packet(per AX.25).
Baud Rate: To 300 baud.Operating Temperature: 0-45 C.
Audio Interface: 6000 dBm nominal.Tone Frequencies: Software Controlled, 500 to 2500 HzPrinter Port: Centronics parallel interface, DSUB
mini connector.Keyboard: 100 key QWERTY.Display: High contrast, High resolution LCD
(colour optional).Radio Interface: RS-232.RAM memory: 4 MB floppy disk.Hard Drive: 330MB hard disk.Operating System: PC-compatible DOS and WindowsTM
Specifications subject to change without notice.
-
7/23/2019 RT7000
8/8
RT7000 SystemsThe RT7000 series offers a complete selection of accessories including power supplies, antenna tuners, antennas, etc. A family of EiKa-Tronic standardsystems has been developed to help users configure packages of hardware. These standard systems come complete with all equipment, cables, audioaccessories and antennas. Additional options and accessories can be added to tailor these systems to specific customer needs. Several representativesystems are:
RS7100 400-WATT BASE STATIONRS7000SYS7 125-WATT BASE STATIONFOR VOICE/DATA TRANSMISSION
A complete 400-watt HFbase-station system that isstack-mounted and includesa transceiver, AC powersupply ( not shown), RA400400-watt amplifier, ABBbroadband antenna, cablesand microphone. Thesystem is also available witha RAT1000 automaticantenna tuner for use with
whip and wire antenna.
A complete 1000-watt HFbase station that is stack-mounted and includes atransceiver, 1-kW amplifier,power supply (not shown),antenna tuner (not shown),10 m whip antenna, cablesand microphone. Thesystem is also available withan ABB broadbandantenna.
RS7500 1-KW BASE STATION A complete 125-watt HF base station for voice or multi-mode (RTTYCW, ARQ and Packet) data transmission. The system includes atransceiver, AC power supply, TW9200 Datacom terminal, ABBbroadband loop antenna, cables and microphone. It is also availablewith RAT100 or RAT7000 automatic antenna tuners for use with whipand wire antennas.
TW7000F FLY-AWAY SYSTEMS
A complete 125-watt HF fly-away system which includes atransceiver with a deployable extended control unit, deployableautomatic antenna tuner, antenna, cables, accessories, and handset
Eika-Tronic A.s communication systemsIndustriveien 3, N-9325 Bardufoss, Norway
tel (778) 34105 fax (778) 33931 A.L.5/2005