rx-v493rds rx-v393rds - yamaha corporation€¦ · 2 indoor fm antenna antenne fm intérieure...

OWNER’S MANUALMODE D’EMPLOI

BEDIENUNGSANLEITUNGBRUKSANVISNING

MANUALE DI ISTRUZIONIMANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Natural Sound AV Receiver

Récepteur audiovisuel “Son Naturel”

Natural Sound AV-Receiver

Natural Sound AV-receiver

Sintonizzatore AV a suono naturale

Receptor AV de Sonido Natural

Natural Sound AV Ontvanger

RX-V493RDSRX-V393RDS

G B

2

● Indoor FM Antenna● Antenne FM intérieure● UKW-Innenantenne● FM inomhusantenn● Antenna FM interna● Antena FM interior● FM Binnenantenne

● AM Loop Antenna● Cadre-antenne AM● MW-Rahmenantenne● AM ramantenn● Antenna AM ad anello● Antena de cuadro de AM● AM Lusantenne

● 75-ohm/300-ohm antenna adapter (U.K. model only)● Adaptateur d’antenne 75 ohms/300 ohms (Modèle pour le

Royaume-Uni seulement)● 75 Ohm/300 Ohm Antennenstecker (nur Großbritannien-

Modell)● 75 ohm/300 ohm antennadapter (Endast modell för

Storbritannien)● Adattatore per antenna da 75 e 300 ohm (Solo modello per

la Gran Bretagna)● Adaptador de antena de 75 ohmios/300 ohmios (Modelo

para Reino Unido sólo)● 75 ohm/300 ohm antenne-adapter (Alleen modellen voor

Groot-Brittannië)

● Remote Control Transmitter● Télécommande● Fernbedienung● Fjärrkontroll● Telecomando● Transmisor de control remoto● Afstandbediening

● Batteries (size AA, R6, UM-3)● Piles (taille AA, R6, UM-3)● Batterien (Größe AA, R6, UM-3)● Batterier (storlek AA, R6, UM-3)● Batterie (dimensioni AA, R6, UM-3)● Pilas (tamaño AA, R6, UM-3)● Batterijen (maat AA, R6, UM-3)

SUPPLIED ACCESSORIES ● After unpacking, check that the following parts are included.ACCESSOIRES FOURNIS ● Après le déballage, vérifier que les pièces suivantes sont incluses.MITGELIEFERTE ZUBEHÖRTEILE ● Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.MEDFÖLJANDE TILLBEHÖR ● Kontrollera efter det apparaten packats upp att följande delar finns med.ACCESSORI IN DOTAZIONE ● Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.ACCESORIOS INCLUIDOS ● Desembalar el aparato y verificar que los siguientes accesorios están en la caja.BIJGELEVERDE ACCESSOIRES ● Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.

2CH/6CH

REC/PAUSEDIR BDIR A PLAY

DISC

VOLUME

PLAY

PRESET A/B/C/D/E– +

TESTDELAY TIME EFFECT

PROGRAM PROLOGIC ENHANCED

– +

SLEEP

TAPEA/B

ON/OFF

TUNER

CD

PHONO

VIDEOVCR

POWER /I


DISC

POWER /I VOLUME

PLAY


TIME/LEVEL TEST EFFECT


– +

SLEEP

TAPEA/B

ON/OFF

2CH/6CH

TUNER

CD

PHONO

DELAY/CENTER/REAR/SWFR

DVD/LDVCR TV/DBS

RX-V493RDS RX-V393RDS

3

En

glish

● 5 Speaker Configuration (Power Amp. Section)RX-V493RDS

Main: 65W + 65W (8Ω) RMS OutputPower, 0.04% THD, 20–20,000 Hz

Center: 65W (8Ω) RMS Output Power, 0.04% THD, 1 kHz

Rear: 20W + 20W (8Ω) RMS Output Power, 0.04% THD, 1 kHz

RX-V393RDS

Main: 50W + 50W (8Ω) RMS OutputPower, 0.04% THD, 20–20,000 Hz

Center: 50W (8Ω) RMS Output Power, 0.04% THD, 1 kHz

Rear: 20W + 20W (8Ω) RMS Output Power, 0.04% THD, 1 kHz

● Digital Sound Field Processor

● Dolby Pro Logic Surround Decoder

● Theater-like Sound Experience by theCombination of Dolby Pro Logic andYAMAHA DSP Technology (CINEMA DSP)

● Automatic Input Balance Control forDolby Pro Logic Surround

● Test Tone Generator for Easier SpeakerBalance Adjustment

● 3 Center Channel Modes(NORMAL/WIDE/PHANTOM)

● Multi-Functions for RDS BroadcastReception

● 40-Station Random Access Preset Tuning

● Automatic Preset Tuning

● Preset Station Shifting Capability (PresetEditing)

● IF Count Direct PLL Synthesizer TuningSystem

● 6-Channel Discrete Input Terminals forConnecting with a Dolby Digital (AC-3)Decoder

● Video Signal Input/Output Capability

● SLEEP Timer

● Remote Control Capability

SUPPLIED ACCESSORIES ...........................2

FEATURES .....................................................3

CAUTION ........................................................4

NOTES ABOUT THE REMOTE CONTROL

TRANSMITTER ...............................................5

PROFILE OF THIS UNIT ................................6

SPEAKER SETUP ..........................................7

CONNECTIONS ..............................................8

CONTROLS AND THEIR FUNCTIONS ........16

SPEAKER BALANCE ADJUSTMENT ..........22

BASIC OPERATIONS ...................................25

TUNING OPERATIONS ................................29

PRESET TUNING .........................................30

RECEIVING RDS STATIONS ........................33

USING DIGITAL SOUND FIELD

PROCESSOR (DSP) ....................................38

SETTING THE SLEEP TIMER ......................42

TROUBLESHOOTING ..................................43

SPECIFICATIONS .........................................44

Thank you for selecting this YAMAHA AV receiver.

FEATURES

CONTENTS

4

1. To assure the finest performance, please read this manualcarefully. Keep it in a safe place for future reference.

2. Install this unit in a cool, dry, clean place – away fromwindows, heat sources, sources of excessive vibration,dust, moisture and cold. Avoid sources of humming(transformers, motors). To prevent fire or electrical shock,do not expose the unit to rain or water.

3. Never open the cabinet. If something drops into the set,contact your dealer.

4. Do not use force on switches, controls or connection wires.When moving the unit, first disconnect the power plug andthe wires connected to other equipment. Never pull thewires themselves.

5. The openings on the cabinet assure proper ventilation ofthe unit. If these openings are obstructed, the temperatureinside the cabinet will rise rapidly. Therefore, avoid placingobjects against these openings, and install the unit in well-ventilated condition. Be sure to allow a space of at least 20 cm behind, 20 cm on the both sides and 30 cm abovethe top panel of the unit. Otherwise it may not only damagethe unit, but also cause fire.

6. Always set the VOLUME control to “– ∞” before startingthe audio source play. Increase the volume gradually to anappropriate level after playback has been started.

7. Do not attempt to clean the unit with chemical solvents;this might damage the finish. Use a clean, dry cloth.

8. Be sure to read the “TROUBLESHOOTING” sectionregarding common operating errors before concluding thatthe unit is faulty.

9. When not planning to use this unit for long periods of time(ie., vacation, etc.), disconnect the AC power plug from thewall outlet.

10. To prevent lightning damage, disconnect the AC powerplug and antenna cable when there is an electrical storm.

11. Grounding or polarization – Precautions should be takenso that the grounding or polarization of an appliance is notdefeated.

12.Do not connect audio equipment to the AC outlet on therear panel if the equipment requires more power than theoutlet is rated to provide.

This unit is not disconnected from the AC power source aslong as it is connected to the wall outlet, even if this unititself is turned off. This state is called the standby mode.In this state, this unit is designed to consume a very smallquantity of power.

IMPORTANTPlease record the serial number of this unit in the spacebelow.

Model:

Serial No.:

The serial number is located on the rear of the unit.Retain this Owner’s Manual in a safe place for futurereference.

WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

For U.K. customersIf the socket outlets in the home are not suitable for the plugsupplied with this appliance, it should be cut off and anappropriate 3 pin plug fitted. For details, refer to theinstructions described below.Note: The plug severed from the mains lead must bedestroyed, as a plug with bared flexible cord is hazardous ifengaged in a live socket outlet.

Special Instructions for U.K. Model

IMPORTANTTHE WIRES IN MAINS LEAD ARE COLOURED INACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRALBrown: LIVE

As the colours of the wires in the mains lead of thisapparatus may not correspond with the coloured markingsidentifying the terminals in your plug, proceed as follows:The wire which is coloured BLUE must be connected to theterminal which is marked with the letter N or colouredBLACK. The wire which is coloured BROWN must beconnected to the terminal which is marked with the letter Lor coloured RED. Making sure that neither core isconnected to the earth terminal of the three pin plug.

CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.

5

En

glish

Battery installation

Battery replacement

If you find that the remote control transmitter must be usedcloser to the main unit, the batteries are weak. Replace bothbatteries with new ones.

Notes● Use only AA, R6, UM-3 batteries for replacement.● Be sure the polarities are correct. (See the illustration inside

the battery compartment.)● Remove the batteries if the remote control transmitter will not

be used for an extended period of time.● If batteries leak, dispose of them immediately. Avoid

touching the leaked material or letting it come in contact withclothing, etc. Clean the battery compartment thoroughlybefore installing new batteries.

Remote control transmitter operation range

Notes● There should be no large obstacles between the remote

control transmitter and the main unit.● If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),it might cause the remote control transmitter not to workcorrectly. In this case, reposition the main unit to avoid directlighting.

1

3

2


NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

WARNINGDo not change the IMPEDANCE SELECTOR switchsetting while the power to this unit is on, otherwise thisunit may be damaged.

IF THIS UNIT FAILS TO TURN ON WHEN THESTANDBY/ON SWITCH IS PRESSEDThe IMPEDANCE SELECTOR switch may not be set toeither end closely. If so, set the switch to either end closely.

l620

28

40

60

l2

8

4

2

0–dB

l620

28

40

60

l2

8

4

2

0–dB

30° 30°

Remote controlsensor

Within approximately6 m (19.7 feet)

IMPEDANCE SELECTOR

(Europe model)

REARCENTER

MAIN

6ΩMIN. /SPEAKERSINGLE:6ΩMIN. /SPEAKER

DUAL:3ΩMIN. /SPEAKERA OR B:4ΩMIN. /SPEAKER

A B:8ΩMIN. /SPEAKER

REARCENTER

MAIN


DUAL:4ΩMIN. /SPEAKERA OR B:8ΩMIN. /SPEAKERA B:16ΩMIN. /SPEAKER

IMPEDANCE SELECTORSET BEFORE POWER ON

6

PROFILE OF THIS UNITYou are the proud owner of a Yamaha stereo receiver –an extremely sophisticated audio component. The Digital Sound FieldProcessor (DSP) built into this unit takes advantage of Yamaha’s undisputed leadership in the field of digital audio processing tobring you a whole new world of listening experiences. Follow the instructions in this manual carefully when setting up your system,and this unit will sonically transform your room into a wide range of listening environments –movie theater, concert hall, and so on.In addition, you get incredible realism from sources encoded with Dolby Surround using the built-in Dolby Pro Logic SurroundDecoder.Please read this operation manual carefully and store it in a safe place for later reference.

Digital Sound Field Processing

What is it that makes live music so good? Today’s advancedsound reproduction technology lets you get extremely close tothe sound of a live performance, but chances are you’ll stillnotice something missing: the acoustic environment of the liveconcert hall. Extensive research into the exact nature of thesonic reflections that create the ambience of a large hall hasmade it possible for Yamaha engineers to bring you this samesound in your own listening room, so you’ll feel all the sound ofa live concert.

Furthermore, our technicians, armed with sophisticatedmeasuring equipment, have even made it possible to capturethe acoustics of a variety of venues such as an actual concerthall, theater, etc. to allow you to accurately recreate one ofseveral actual live performance environments, all in your ownhome.

Dolby Pro Logic Surround

This unit employs a Dolby Pro Logic Surround decoder similarto professional Dolby Stereo decoders used in many movietheaters. By using the Dolby Pro Logic Surround decoder, youcan experience the dramatic realism and impact of DolbySurround movie theater sound in your own home. Dolby ProLogic employs a four channel five speaker system. The ProLogic Surround system divides the input signal into four levels:the left and right main channels, the center channel (used fordialog), and the rear surround sound channels (used for soundeffects, background noise, and other ambient noises). Thecenter channel allows listeners seated in even less-than-idealpositions to hear the dialog originating from the action on thescreen while experiencing good stereo imaging. Dolby Surround is encoded on the sound track of pre-recordedvideo tapes, laser discs, and some TV/cable broadcasts. Whenyou play a source encoded with Dolby Surround on this unit,the Dolby Pro Logic Surround decoder decodes the signal anddistributes the surround-sound effects.

This Dolby Pro Logic Surround Decoder employs a digitalsignal processing system. This system improves the stability ofsound at each channel and minimizes crosstalk betweenchannels, so that positioning of sounds around the room ismore accurate compared with conventional analog signalprocessing systems.In addition, this unit features a built-in automatic input balancecontrol. This always assures you the best performance withoutmanual adjustment.

Manufactured under license from Dolby Laboratories LicensingCorporation. “Dolby”, “AC-3”, “Pro Logic” and the double-Dsymbol are trademarks of Dolby Laboratories LicensingCorporation.

Dolby Pro Logic Surround + DSP

Dolby Surround sound system shows its full ability in a largemovie theater, because movie sounds are originally designedto be reproduced in a large movie theater using manyspeakers. It is difficult to create a sound environment similar tothat of a movie theater in your listening room, because theroom size, materials of inside walls, the number of speakers,etc. of your listening room is much different from those of amovie theater.Yamaha DSP technology made it possible to present you withnearly the same sound experience as that of a large movietheater in your listening room by compensating for lack ofpresence and dynamics in your listening room with its originaldigital sound fields combined with Dolby Surround sound field.

The combination of Dolby Pro Logic Surround and DSP is usedon the sound field program “ PRO LOGIC ENHANCED”.

The YAMAHA “CINEMA DSP” logo indicates these programs arecreated by the combination of Dolby Pro Logic and YAMAHADSP technology.

CINEMA DSP

7

En

glish

SPEAKER SETUPSPEAKERS TO BE USED

This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The most effective speakers to use withthis unit are main speakers, rear speakers and a center speaker. You may omit the center speaker. (Refer to the “4-SpeakerConfiguration” shown below.)The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from yourpresent stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the centersounds (dialog etc.) within programs encoded with Dolby Surround. The center speaker needs to be equal in power to the mainspeakers, although the rear speakers should not be equal. However, all the speakers should have high enough power handling toaccept the maximum output of this unit.

SPEAKER CONFIGURATION

5-Speaker Configuration

This configuration is the most effective and recommended one.In this configuration, the center speaker is necessary as well asthe rear speakers. If the program DOLBY PRO LOGIC orDOLBY PRO LOGIC ENHANCED is selected, conversationswill be output from the center speaker and the ambience will beexcellent.• Set the center channel mode to the “NORMAL” or “WIDE”

position. (For details, refer to page 23.)

4-Speaker Configuration

The center speaker is not used in this configuration. If theprogram DOLBY PRO LOGIC or DOLBY PRO LOGICENHANCED is selected, the center sound is output from theleft and the right main speakers. However, the sound effect ofother programs can be the same as that of the 5-speakerconfiguration.• Be sure to set the center channel mode to the “PHANTOM”

position. (For details, refer to page 23.)

SPEAKER PLACEMENT

The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: main speakers (your normalstereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following.

Main: In normal position. (The position of your presentstereo speaker system.)

Rear: Behind your listening position, facing slightly inward.Nearly 1.8m (approx. 6 feet) up from the floor.

Center: Precisely between the main speakers. (To avoidinterference with TV sets, use a magnetically shieldedspeaker.)

Front L Center Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L Rear R

Front L Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L Rear R

Front RCenter

Front L

TV set

Rear R

Rear L

Main L Main RMain L Main R

Main L

Main R

8

CONNECTIONSNever plug in this unit and other components until all connections are completed.

CONNECTIONS WITH OTHER COMPONENTS

When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit.* If you have YAMAHA components numbered as 1, 3, 4, etc. on the rear panel, connections can be made easily by making sure

to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.

*1

, *2

: See the next page.

FMANT

AMANT

GND

75ΩUNBAL.

GND

MONITOR OUT DVD/LD TV/DBS

IN OUTVCR

IN OUTVCR

PHONO

CD

DVD/LD TV/DBSTAPEPB

RECOUT

1

3 4

REARCENTER

MAIN




REARCENTER

MAIN



DVD/LDTV/DBS

MAINR L SURROUNDR L CENTERSUB

WOOFER

6CHDISCRETE

INPUT

VIDEOSIGNAL

TAPE/MD

AUDIO SIGNAL


I00W MAX. TOTALSWITCHED

AC OUTLETS

SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

MAIN

A

B

CENTERREAR

(SURROUND)

OUTPUT

SUBWOOFER

SPEAKERS

10dB 0dB

MAINLEVEL

GN

D

OU

TP

UT

AU

DIO

IN

VID

EO

IN

AU

DIO

OU

T

VID

EO

OU

T

VID

EO

IN AU

DIO

OU

T

VID

EO

OU

T

LIN

E O

UT

LIN

E IN

OU

TP

UT

VID

EO

OU

T

AU

DIO

OU

T

(Europe model)

To AC outlet

Turntable

LD player, DVD player, etc.

Video cassette recorder TV/Satellite tuner

Tape deck, MD recorder, etc.

CD player

Monitor TV

*2

*1

RX-V493RDS

9

En

glish

AC OUTLETS (SWITCHED)(Europe model) ................................. 2 SWITCHED OUTLETS(U.K. model) ........................................ 1 SWITCHED OUTLETUse these to connect the power cords from your componentsto this unit.The power to the SWITCHED outlets is controlled by this unit’sSTANDBY/ON switch or the provided remote controltransmitter’s POWER /I key. These outlets will supply powerto any component whenever this unit is turned on.The maximum power (total power consumption of components)that can be connected to the SWITCHED AC OUTLETS is 100watts.

GND terminal (For turntable use)Connecting the ground wire of the turntable to the GNDterminal will normally minimize hum, but in some cases betterresults may be obtained with the ground wire disconnected.

*1

*2

RX-V393RDS

FMANT

AMANT

GND

75ΩUNBAL.

GND

MONITOR OUT VIDEO

IN OUTVCR

IN OUTVCR

PHONO

CD

VIDEOTAPEPB

RECOUT

1

3 4

REARCENTER

MAIN




REARCENTER

MAIN



VIDEO


WOOFER

6CHDISCRETE

INPUT

VIDEOSIGNAL

TAPE/MD

AUDIO SIGNAL


I00W MAX. TOTALSWITCHED

AC OUTLETS

SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

MAIN

A

B

CENTERREAR

(SURROUND)

OUTPUT

SUBWOOFER

SPEAKERS

10dB 0dB

MAINLEVEL

GN

D

OU

TP

UT

AU

DIO

IN

VID

EO

IN

AU

DIO

OU

T

VID

EO

OU

T

VID

EO

IN

LIN

E O

UT

LIN

E IN

OU

TP

UT

VID

EO

OU

T

AU

DIO

OU

T(Europe model)

To AC outlet

Turntable

LD player, DVD player, etc.

Video cassette recorder

Tape deck, MD recorder, etc.

CD player

Monitor TV

*2

*1

*1, *

2 : See below.

FMANT

AMANT

GND

75ΩUNBAL.

GND

MONITOR OUT DVD/LD TV/DBS

IN OUTVCR

IN OUTVCR

PHONO

CD

DVD/LD TV/DBSTAPEPB

RECOUT

1

3 4

DVD/LDTV/DBS


WOOFER

6CHDISCRETE

INPUT

VIDEOSIGNAL

TAPE/MD

AUDIO SIGNAL

AC-3 RFOUT

AC-3 RFIN

DIGITALIN

DIGITALOUT

VIDEO OUT

AUDIO OUT

6CH DISCRETE OUTPUT

CENTER SURROUNDMAIN

SUBWOOFER

10dB 0dB

MAINLEVEL

10

Connecting with 6 channel discrete outputs of a Dolby digital (AC-3) decoderor a DVD player, etc.If you have a Dolby Digital (AC-3) decoder or a DVD player etc. which incorporates a Dolby Digital (AC-3) decoder or a DTSdecoder, its 6 channel discrete outputs can be connected to the 6CH DISCRETE INPUT terminals of this unit.

Notes for RX-V493RDS• The laserdisc player (or another unit) must be also

connected to the DVD/LD (or TV/DBS) AUDIO SIGNAL inputterminals of this unit for playing a source with the Dolby ProLogic Surround decoded or in normal stereo (or monaural).

• The discrete signals input to this unit cannot be recorded bya tape deck, MD recorder or VCR. To record a source playedon the laserdisc player (or another unit), it must beconnected to the DVD/LD (or TV/DBS) AUDIO/VIDEOSIGNAL input terminals of this unit.

• If you made no connection to the SUBWOOFER inputterminal of this unit or you will not use a subwoofer, youshould make a setting for distributing signals at theSUBWOOFER channel to the right and left MAIN outputterminals on the Dolby Digital (AC-3) decoder etc. For details, refer to the owner’s manual for the Dolby Digital(AC-3) decoder etc.

Dolby Digital (AC-3) decoder

RF Demodulator

Laserdisc player with AC-3 RF output oranother unit

RX-V493RDS

(Example)

FMANT

AMANT

GND

75ΩUNBAL.

GND

MONITOR OUT VIDEO

IN OUTVCR

IN OUTVCR

PHONO

CD

VIDEOTAPEPB

RECOUT

1

3 4

VIDEO


WOOFER

6CHDISCRETE

INPUT

VIDEOSIGNAL

TAPE/MD

AUDIO SIGNAL

AC-3 RFOUT

AC-3 RFIN

DIGITALIN

DIGITALOUT

VIDEO OUT

AUDIO OUT

6CH DISCRETE OUTPUT

CENTER SURROUNDMAIN

SUBWOOFER

10dB 0dB

MAINLEVEL

11

En

glish

Notes for RX-V393RDS• The laserdisc player (or another unit) must be also

connected to the VIDEO AUDIO SIGNAL input terminals ofthis unit for playing a source with the Dolby Pro LogicSurround decoded or in normal stereo (or monaural).

• The discrete signals input to this unit cannot be recorded bya tape deck, MD recorder or VCR. To record a source playedon the laserdisc player (or another unit), it must beconnected to the VIDEO AUDIO/VIDEO SIGNAL inputterminals of this unit.

• If you made no connection to the SUBWOOFER inputterminal of this unit or you will not use a subwoofer, youshould make a setting for distributing signals at theSUBWOOFER channel to the right and left MAIN outputterminals on the Dolby Digital (AC-3) decoder etc. For details, refer to the owner’s manual for the Dolby Digital(AC-3) decoder etc.

Dolby Digital (AC-3) decoder

RF Demodulator

Laserdisc player with AC-3 RF output oranother unit

RX-V393RDS

(Example)

12

CONNECTING SPEAKERS

CENTERREAR

(SURROUND)

OUTPUT

SUBWOOFER

REAR

CENTER

C DDUAL

SINGLE

CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.MAIN

A

B

REARCENTER

MAIN




REARCENTER

MAIN



SPEAKERS


Rear speaker Rear speaker

Center speaker

Main speakers B

LeftRight

Left Right

Main speakers A

Subwoofer system

LeftRight

NoteUse speakers with the specified impedance shown on therear of this unit.

Note on main speaker connections:One or two speaker systems can be connected to this unit. Ifyou use only one speaker system, connect it to either theSPEAKERS A or B terminals.

Note on a subwoofer connection:You may wish to add a subwoofer to reinforce low frequenciesor to output low bass sound from the subwoofer channel whenreproducing discrete signals.Connect the SUBWOOFER OUTPUT terminal of this unit tothe INPUT terminal of the subwoofer amplifier, and connect thespeaker terminals of the subwoofer amplifier to the subwoofer.With some subwoofers, including the Yamaha Active ServoProcessing Subwoofer System, the amplifier and subwooferare in the same unit.

Note on center speaker connection:One or two center speakers can be connected to this unit. Ifyou cannot place the center speaker on or under the TV, it isrecommended to use two center speakers and place them onboth sides of the TV to orient the center sound at the centerposition. For connecting two center speakers, follow themethod shown below.

REAR

CENTER

C DDUAL

SINGLE

Center speaker Center speaker

(Europe model)

13

En

glish

For connecting to the MAIN SPEAKERS terminals

Red: positive (+)Black: negative (–)

➀ Unscrew the knob.➁ Insert the bare wire.

[Remove approx. 5mm(1/4”) insulation fromthe speaker wires.]

➂ Tighten the knob andsecure the wire.

For connecting to the REAR and CENTER SPEAKERSterminals

Red: positive (+)Black: negative (–)

➀ Press the tab.➁ Insert the bare wire.

[Remove approx. 5mm(1/4”) insulation fromthe speaker wires.]

➂ Release the tab andsecure the wire.

12

3

How to Connect:Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections arefaulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and –markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.CautionDo not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/orspeakers.

MAIN LEVEL switchNormally set to “0 dB”. If desired, you can decrease theoutput level at the MAIN SPEAKERS terminals by 10 dB bysetting this switch to “–10 dB”.

FMANT

AMANT

GND

75ΩUNBAL.

GND

PHONO TAPEPB3

MAINLEVEL

10dB 0dB

➁

➂

➀

14

CENTER OUTPUT terminalThis terminal is for center channel line output. There is noconnection to this terminal when you use the built-in amplifier.However, if you drive a center speaker with an external poweramplifier, connect the input terminal of the external amplifier tothis terminal.

SUBWOOFER OUTPUT terminalThis terminal is for connecting with the input terminal of anamplifier for driving a subwoofer. This terminal outputs low frequencies from the main and centerchannels. (The cut-off frequency of signals output from thisterminal is 150 Hz.)When 6 channel discrete signals are input to this unit and areselected as the input source, this terminal outputs signals fromthe subwoofer channel.

REAR (SURROUND) OUTPUT terminalsThese terminals are for rear channel line output. There is noconnection to these terminals when you use the built-inamplifier.However, if you drive rear speakers with an external stereopower amplifier, connect the input terminals of the externalamplifier (MAIN IN or AUX terminals of a power amplifier or anintegrated amplifier) to these terminals.

NoteOutput level of signals from these terminals are adjustedby the use of VOLUME control on the front panel or VOLUMEkeys on the remote control transmitter.

OUTPUT terminals (for driving speakers with external amplifiers)

Be sure to switch this only when the power to this unit is not on.Select the position whose requirements your speaker systemmeets.

(Upper position)

Rear: The impedance of each speaker must be 6Ω orhigher.

Center: If you use one center speaker, the impedance of thespeaker must be 6Ω or higher.If you use two center speakers, the impedance ofeach speaker must be 3Ω or higher.

Main: If you use one pair of main speakers, the impedanceof each speaker must be 4Ω or higher.If you use two pairs of main speakers, the impedanceof each speaker must be 8Ω or higher.

(Lower position)

Rear: The impedance of each speaker must be 8Ω orhigher.

Center: If you use one center speaker, the impedance of thespeaker must be 8Ω or higher.If you use two center speakers, the impedance ofeach speaker must be 4Ω or higher.

Main: If you use one pair of main speakers, the impedanceof each speaker must be 8Ω or higher.If you use two pairs of main speakers, the impedanceof each speaker must be 16Ω or higher.

IMPEDANCE SELECTOR switch

REARCENTER

MAIN




REARCENTER

MAIN




CENTERREAR

(SURROUND)

OUTPUT

SUBWOOFER

(Europe model)

WARNINGDo not change the IMPEDANCE SELECTOR switchsetting while the power to this unit is on, otherwisethis unit may be damaged.

IF THIS UNIT FAILS TO TURN ON WHEN THESTANDBY/ON SWITCH IS PRESSEDThe IMPEDANCE SELECTOR switch may not be set toeither end closely. If so, set the switch to either endclosely.

15

En

glishANTENNA CONNECTIONS

● Each antenna should be connected to the designated terminals correctly, referring to the following diagram.● Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal

strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experiencepoor reception quality, an outdoor antenna may result in improvement.

Connecting the AM loop antenna

* The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.* The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.

GND terminalFor maximum safety and minimum interference, connect theGND terminal to a good earth ground. A good earth ground isa metal stake driven into moist earth.

Notes● When connecting the indoor

FM antenna, insert itsconnector into the FM ANTterminal firmly.

● If you need an outdoor FM antenna to improve FM reception quality, either 300-ohm feeder or coaxial cable may be used. In locationstroubled by electrical interference, coaxial cable ispreferable.

FMANT

AMANT

GND

75ΩUNBAL.

➀

➁

➂Orient so that the bestreception is obtained.

1 2 3

Outdoor FM antenna Outdoor AM antenna

AM loopantenna(included)

Ground

75-ohm/300-ohmantenna adapter

75-ohm/300-ohmantenna adapter

75-ohm coaxial cable

300-ohm feeder

Indoor FMantenna

(included)

16

CONTROLS AND THEIR FUNCTIONSFRONT PANEL

PRO LOGIC ENHANCEDCONCERT

VIDEOMONOMOVIE STADIUM

STANDBY/ON

NATURAL SOUND AV RECEIVER RX–V493RDS

SPEAKERSPHONES

A

ON

B

OFF

BASS TREBLE BALANCE

VOLUME

5 54

3

2l 0 l

2

3

45 5

4

3

2l 0 l

2

3

4L R

l620

28

40

60

l2

8

4

2

0–dB

CINEMA DSP

5 54

3

2l 0 l

2

3

4

DELAY/CENTER/REAR/SWFRFM/AM

MAN'L/AUTO FM

TUNINGMODE

AUTO/MAN'L MONO

CENTERMODE

DISCOCONCERT

HALLROCK

CONCERT EFFECT

DOWN TUNING UP

MEMORY EDIT TIME/LEVEL

A/B/C/D/E 1 2 3 4 5 6 7 8

VCR DVD/LDTV/DBS

TAPE/MD MON 2CH/6CH

TUNER CDPHONO

1

8 9 0 A B C IJ L MN

H K

2 3 4 5 76

RDS MODE/FREQ EON

MODE START

PTY SEEK

DEFG

STANDBY/ON

NATURAL SOUND AV RECEIVER RX–V393RDS

SPEAKERSPHONES

A

ON

B

OFF

BASS TREBLE BALANCE

VOLUME

5 54

3

2l 0 l

2

3

45 5

4

3

2l 0 l

2

3

4L R

l620

28

40

60

l2

8

4

2

0–dB

CINEMA DSP

5 54

3

2l 0 l

2

3

4

FM/AM

MAN'L/AUTO FM

TUNINGMODE

AUTO/MAN'L MONO

CENTERMODEDOWN TUNING UP EFFECT

MEMORY EDIT PROGRAM

A/B/C/D/E 1 2 3 4 5 6 7 8

TAPE/MD MONITOR VIDEO

2CH/6CH

VCR

TUNER CDPHONO

REARLEVEL

CENTERLEVEL

0 l0 0 l0

1

8 9 0 A B C O P QN6

2 3 4 7

IJ L

H K

RDS MODE/FREQ EON

MODE START

PTY SEEK

DEFG

RX-V493RDS

RX-V393RDS

17

En

glish1 STANDBY/ON switch

Press this switch to turn the power to this unit on. Press itagain to turn this unit into the standby mode.

Standby modeIn this state, this unit consumes a very small quantity ofpower to receive infrared-signals from the remote controltransmitter.

2 Remote control sensorReceives signals from the remote control transmitter.

3 Display panelShows various information. (For details, refer to page 19.)

4 Input selector buttonsSelect a program source to listen to or watch. When a button ispressed, the name of selected source appears on the display.

RX-V493RDS only

When the TV/DBS or DVD/LD input source is selected,pressing the same button (TV/DBS or DVD/LD) switches theinput signals between 2 channel stereo signals and 6 channeldiscrete signals. When switched to “6ch”, discrete signals fromthe unit connected to the 6CH DISCRETE INPUT DVD/LDTV/DBS terminals of this unit are selected as the input signals.

RX-V393RDS only

When the VIDEO input source is selected, pressing the samebutton (VIDEO) switches the input signals between 2 channelstereo signals and 6 channel discrete signals. When switchedto “6ch”, discrete signals from the unit connected to the 6CHDISCRETE INPUT VIDEO terminals of this unit are selected asthe input signals.

5 DSP program selector buttonsRX-V493RDS only

Select a DSP program. When a button is pressed, the name ofselected program lights up on the display.

6 EFFECT buttonSwitches on/off the digital sound field processor (including theDolby Pro Logic Surround decoder).

7 VOLUME controlUsed to raise or lower the volume level.

8 PHONES jackWhen you listen with headphones, connect the headphones tothe PHONES jack. You can listen to the sound to be outputfrom the main speakers through headphones.When listening with headphones privately, set both theSPEAKERS A and B switches to the OFF position and switchoff the digital sound field processor (so that no DSP programname is illuminated on the display) by pressing the EFFECTbutton.

9 SPEAKERS switchesSet the switch A or B (or both A and B) for the main speakersystem (connected to this unit) you will use to the ON position.Set the switch for the main speaker system you will not use tothe OFF position.

0 A/B/C/D/E buttonPress this button to select a desired group (A–E) of presetstations.

A Preset station number selector buttonsSelect a preset station number (1 to 8).

B Tone controlsThese controls are effective only for the sound from the mainspeakers.BASSUsed to increase or decrease the low frequency response.The 0 position produces flat response.TREBLEUsed to increase or decrease the high frequency response.The 0 position produces flat response.

C BALANCE controlThis control is effective only for the sound from the mainspeakers.Adjusts the balance of the output volume to the left and rightspeakers to compensate for sound imbalance caused byspeaker location or listening room conditions.

D RDS MODE/FREQ button When an RDS station is received, pressing this button changesthe display mode into the PS mode, PTY mode, RT modeand/or CT mode (if the station employs those RDS dataservices), and frequency display in turn.

PHONES

18

E PTY SEEK MODE buttonWhen this button is pressed, the unit turns into the PTY SEEKmode.

F PTY SEEK START buttonPress this button to begin searching for a station after thedesired program type is selected in the PTY SEEK mode.

G EON buttonPress this button to select a desired program type (NEWS,INFO, AFFAIRS, SPORT) when you want to call a radioprogram of that program type automatically.

H FM/AM buttonPress this button to switch the reception band to FM or AM.

I MEMORY (MAN’L/AUTO FM) buttonWhen this button is pressed, the “MEMORY” indicator flashesfor about 5 seconds. During this period, select a desiredpreset station number by pressing the corresponding presetstation number selector button to enter the displayed stationinto the memory.When this button is pressed and held for more than 3 seconds,the automatic preset tuning begins. (For details, refer to page31.)

J EDIT buttonThis button is used to exchange the places of two presetstations with each other.

K TUNING DOWN/UP buttonUsed for tuning. Press the “UP” side to tune in to higherfrequencies, and press the “DOWN” side to tune in to lowerfrequencies.When this unit is in the PTY SEEK mode, pressing this switchchanges the currently selected program type.

L TUNING MODE (AUTO/MAN’L MONO) buttonPress this button to switch the tuning mode to automatic ormanual. To select the automatic tuning mode, press thisbutton so that the “AUTO” indicator lights up on the display. Toselect the manual tuning mode, press this button so that the“AUTO” indicator goes off.

M DELAY/CENTER/REAR/SWFR and TIME/LEVEL +/–buttons

RX-V493RDS only

Adjust the delay time (DELAY), the center channel output level(CENTER), the rear channel output level (REAR) and theoutput level to the SUBWOOFER OUTPUT terminal (SWFR). Select the item which you want to adjust by pressing theDELAY/CENTER/REAR/SWFR button and adjust its time orlevel by pressing the TIME/LEVEL +/– button.

N CENTER MODE buttonSelects a center channel output mode (NORMAL, WIDE orPHANTOM). (For details, refer to page 23.)

O PROGRAM selector buttonRX-V393RDS only

When the built-in digital sound field processor (including theDolby Pro Logic Surround decoder) is on, this button changesthe currently selected DSP program whenever the right or leftside of this button is pressed.

P CENTER LEVEL controlRX-V393RDS only

Adjusts the sound output level of the center speaker.

Q REAR LEVEL controlRX-V393RDS only

Adjusts the sound output level of the rear speakers.

19

En

glishDISPLAY PANEL

1 Multi-information displayDisplays various information, for example station frequency,preset station number and name of selected input source.

2 STEREO indicatorLights up when an FM stereo broadcast with sufficient signalstrength is received.

3 Signal-level meterIndicates the signal level of the received station.If multipath interference is detected, the indication decreases.

4 SLEEP indicatorLights up while the built-in SLEEP timer is functioning.

5 Center channel mode indicatorsThe name of a selected center channel mode lights up onlywhen a program which uses the Dolby Pro Logic Surrounddecoder is selected.

6 EFFECT OFF indicatorLights up if neither the digital sound field processor nor theDolby Pro Logic Surround decoder is on. In this state, soundoutput is 2-channel stereo.

7 AUTO indicatorLights up when this unit is in the automatic tuning mode.

8 MEMORY indicatorWhen the MEMORY button is pressed, this indicator flashesfor about 5 seconds. During this period, the displayed stationcan be programmed to the memory by using the A/B/C/D/Ebutton and the preset station number selector buttons.

9 RDS mode indicatorsThe name(s) of RDS mode(s) employed by the currentlyreceived RDS station light(s) up. Illumination of the indicator onthe head of a name shows that the corresponding RDS modeis now selected.

0 PTY HOLD indicatorLights up while the search is performed in the PTY SEEKmode.

A EON indicatorLights up when an RDS station that employs the EON dataservice is received.

B Program type name indicatorsThe name selected in the EON mode lights up.

C TAPE MON indicatorLights up when the tape deck (or MD recorder etc.) is selectedas the input source by pressing the TAPE/MD MONITOR(MON) button.

D DSP program indicatorsThe name of a selected DSP program lights up when the built-in digital sound field processor and/or the Dolby Pro LogicSurround decoder is on.

PRESET

kHzMHz

MEMORY AUTO PTY HOLD

SLEEP

TAPE MON

STEREO

0 20 l00

ms dB

PRO LOGICENHANCED

CONCERTVIDEO

MONOMOVIE STADIUM

DISCO ROCK CONCERTCONCERT HALL

NORMWIDE

PHANTOMEFFECT OFF

PS EON AFFAIRS SPORTNEWS INFO

RT CTPTY

1 2 3 5 6

C DA0 B97 8

4

20

REMOTE CONTROL TRANSMITTERThe remote control transmitter provided with this unit is designed to control all the most commonly used functions of this unit. If theCD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then thisremote control transmitter will also control various functions of each component.


DISC

POWER /I VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

2CH/6CH

TUNER

CD

PHONO


DVD/LDVCR TV/DBS

2

3

4

2

8

9

6

7

5

1

1

2CH/6CH


DISC

VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

TUNER

CD

PHONO

VIDEOVCR

2

3

4

2

8

9

6

7

5

1

1

POWER /I


21

En

glishFor Control of This Unit

1 DELAY/CENTER/REAR/SWFR and TIME/LEVEL +/–keys

RX-V493RDS only

Adjust the delay time (DELAY), the center channel output level(CENTER), the rear channel output level (REAR) and theoutput level to the SUBWOOFER OUTPUT terminal (SWFR). Select the item which you want to adjust by pressing theDELAY/CENTER/REAR/SWFR key and adjust its time or levelby pressing the TIME/LEVEL +/– key.(For details, refer to page 28, 40 and 41.)

DELAY TIME +/– key

RX-V393RDS only

Adjusts the delay time, or the time difference between thebegining of source sound and the begining of effect sound.(For details, refer to page 41.)

2 Tuner keysControl tuner.+: Selects higher preset station number.–: Selects lower preset station number.A/B/C/D/E: Selects the group (A – E) of preset station

numbers.

3 SLEEP timer keyThis key is used to turn the built-in SLEEP timer on and off,and to set the SLEEP time. (For details, refer to page 42.)

4 POWER /I keyTurns the power to this unit on and turns this unit into thestandby mode alternately.

5 VOLUME +/– keysTurn the volume level up/down.

6 Input selector keysSelect input source.

RX-V493RDS only

When the TV/DBS or DVD/LD input source is selected,pressing the same key (TV/DBS or DVD/LD) switches the inputsignals between 2 channel stereo signals and 6 channeldiscrete signals. When switched to “6ch”, discrete signals fromthe unit connected to the 6CH DISCRETE INPUT DVD/LDTV/DBS terminals of this unit are selected as the input signals.

RX-V393RDS only

When the VIDEO input source is selected, pressing the samekey (VIDEO) switches the input signals between 2 channelstereo signals and 6 channel discrete signals. When switchedto “6ch”, discrete signals from the unit connected to the 6CHDISCRETE INPUT VIDEO terminals of this unit are selected asthe input signals.

7 Program selector keys

PROGRAM:When the built-in digital sound field processor (including theDolby Pro Logic Surround decoder) is on, this key changes thecurrently selected DSP program whenever the right or left sideof this key is pressed.

PROLOGIC:Directly selects the PRO LOGIC program.

ENHANCED:Directly selects the PRO LOGIC ENHANCED program.

8 EFFECT ON/OFF keySwitches on/off the digital sound field processor (including theDolby Pro Logic Surround decoder).

9 TEST keyUsed for speaker balance adjustment. (For details, refer topage 22–24.)

For Other Component Control

Identify the remote control transmitter keys with yourcomponent’s keys. If these keys are identical, their functionswill be the same. On each key function, refer to thecorresponding instruction on your component’s manual.

1 Tape deck keysControl tape deck.* DIR A, B and A/B are applicable only to double

cassette tape deck.* For a single cassette deck with automatic reverse

function, pressing DIR A will reverse the direction of tape running.

2 CD player keysControl compact disc player.* DISC is applicable only to compact disc changer.


DISC

POWER /I VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

2CH/6CH

TUNER

CD

PHONO


DVD/LDVCR TV/DBS

22

1

Set to the “∞” position.

2 Turn the power on.

3 Select the main speakers to be used.

* If you use two main speaker systems, press both the Aand B switches.

4

Set to the “0” position.

5

SPEAKER BALANCE ADJUSTMENTThis procedure lets you adjust the sound output level balance between the main, center, and rear speakers using the built-in testtone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same fromeach speaker. This is important for the best performance of the digital sound field processor and the Dolby Pro Logic Surrounddecoder.

SPEAKERS

A

ON OFF

B

BASS TREBLE

5 54

3

2l 0 l

2

3

45 5

4

3

2l 0 l

2

3

4

BALANCE

5 54

3

2l 0 l

2

3

4L R

l620

28

40

60

l2

8

4

2

0–dB

VOLUME

STANDBY/ON

2CH/6CH


DISC

VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

TUNER

CD

PHONO

VIDEOVCR

POWER /I

12

3

l620

28

40

60

l2

8

4

2

0–dB


4

55

TEST

23

En

glish

l620

28

40

60

l2

8

4

2

0–dB

6 Select the center channel output mode suitable for yourspeaker configuration.(Refer to “SPEAKER CONFIGURATION” on page 7.)

On the feature of each mode, refer to the “Note” shownbelow.

NoteIn step 6, when you select a center channel output mode, notethe following.

For 5 speaker configuration)NORMAL: Select this mode when you use a center speaker

that is smaller than the main speakers. In thismode, the bass tone will be output from the mainspeakers.

WIDE: Select this mode when you use the center speakerapproximately same sized as the main speakers.

For 4 speaker configuration)PHANTOM: Select this mode when you do not use the center

speaker. The center sound will be output from theleft and right main speakers.

7 Turn up the volume.

You will hear a test tone (like pink noise) from the left mainspeaker, then the center speaker, then the right mainspeaker, and then the rear speakers, for about two secondseach. The display changes as shown below.

* The test tone from the left rear speaker and the rightrear speaker will be heard at the same time.

8 Adjust the BALANCE control so that the effect soundoutput level of the left main speaker and the right mainspeaker are the same.

l620

28

40

60

l2

8

4

2

0–dB

VOLUME

CENTERMODE NORMAL

WIDE

PHANTOM

68 7

BALANCE

5 54

3

2l 0 l

2

3

4L R

2CH/6CH


DISC

VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

TUNER

CD

PHONO

VIDEOVCR

POWER /I



DISC

POWER /I VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

2CH/6CH

TUNER

CD

PHONO


DVD/LDVCR TV/DBS

7 7

CONTINUED

Main (L)

Main (R)

Center

Rear (L and R)

9 Adjust the sound output levels of the center speaker andthe rear speakers so that they become almost as sameas that of the main speakers.

Make the adjustment of each speaker output level at yourlistening position with the remote control transmitter.

a) Press once or more so that “CENTER” or “REAR”appears on the display.* Select “CENTER” to adjust the output level of the

center speaker, and select “REAR” to adjust theoutput level of the rear speakers.

b) Adjust its level.* Pressing the + side raises and the – side lowers the

level.

10 Cancel the test tone.

Notes● Once you have completed these adjustments, you can

adjust whole sound level on your audio system by usingthe VOLUME control (or the VOLUME keys on the remotecontrol transmitter) only.

● If you use external power amplifiers, you may also usetheir volume controls to achieve proper balance.

● If there is insufficient sound output from the center andrear speakers, you may decrease the main speakeroutput level by setting the MAIN LEVEL switch on therear panel to “–10 dB”.

● RX-V493RDS only

In step 9, if the center channel mode is in the“PHANTOM” position, the sound output level of the centerspeaker cannot be adjusted. This is because in thismode, the center sound is automatically output from theleft and right main speakers.

24

2CH/6CH


DISC

VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

TUNER

CD

PHONO

VIDEOVCR

POWER /I



DISC

POWER /I VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

2CH/6CH

TUNER

CD

PHONO


DVD/LDVCR TV/DBS

10109

RX-V393RDS

TIME/LEVEL– +

RX-V493RDS


Disappears.

TEST

CENTERLEVEL

0 l0

REARLEVEL

0 l0

l620

28

40

60

l2

8

4

2

0–dB

9

25

En

glish

1

Set to the “∞” position.

2 Turn the power on.

3 Select the desired input source by using the inputselector buttons.(For video sources, turn the TV/monitor ON.)

* The name of the selected input source will appear onthe display.

4 Select the main speakers to be used.

* If you use two main speaker systems, press both the Aand B switches.

5 Play the source. (For detailed information on thetuning operation, refer to page 29.)

6

Adjust to the desired output level.

7 If desired, adjust the BASS, TREBLE and BALANCEcontrols (refer to page 28), and use the digital soundfield processor. (Refer to page 39.)

Notes on using the input selector buttons● Note that pressing on each input selector button selects

the source which is connected to the corresponding inputterminals on the rear panel.

● The selection of TAPE/MD MONITOR (MON) cannot becanceled by pressing another input selector button. Tocancel it, press TAPE/MD MONITOR (MON) again so thatthe “TAPE MON” indicator disappears from the display.When you select a button other than TAPE/MDMONITOR (MON), make sure that the “TAPE MON”indicator is not illuminated on the display.

● If you select the input selector button for a video sourcewithout canceling the selection of TAPE/MD MONITOR(MON), the playback result will be the video image fromthe video source and the sound from the audio tape (orMD etc.).

● Once you play a video source, its video image will not beinterrupted even if the input selector button for an audiosource is selected.

When you finish using this unitPress the STANDBY/ON switch on the front panel again orthe POWER /I key on the remote control transmitter to turnthis unit into the standby mode.

BASIC OPERATIONSTO PLAY A SOURCE

l620

28

40

60

l2

8

4

2

0–dB

VOLUME

SPEAKERS

A

ON OFF

B

l620

28

40

60

l2

8

4

2

0–dB

VOLUME

TUNER CDPHONO

STANDBY/ON

1, 62

4 7

l620

28

40

60

l2

8

4

2

0–dB

3

From page 25 to 41, this manual describes how to operate this unit mainly by using the front panel control parts.To operate this unit on the remote control transmitter, use the corresponding keys on the remote control transmitter.

26

In step 3, press the button (shown below) once or more so that“6ch” appears on the display.Discrete signals from the unit connected to the 6CHDISCRETE INPUT terminals of this unit are selected as theinput signals.

To cancel listening to a decoded source using DolbyDigital (AC-3) or DTSPress the same button again or select another input source.

Note for reproducing discrete signals with Dolby Digital(AC-3) or DTS decoded:1. Your speaker system must include a center speaker.2. Your speaker system must include a subwoofer.

* Connect a subwoofer which has a built-in amplifier to theSUBWOOFER OUTPUT terminal of this unit.

* You can do without using a subwoofer. If you do so, youshould make a setting for distributing signals at the LFEchannel to the right and left MAIN output terminals on theDolby Digital (AC-3) Decoder etc. For details, refer to the owner’s manual for the DolbyDigital (AC-3) Decoder etc.

Notes● When you switch to the “6ch” mode, the built-in Digital

Sound Field processor will not work and adjustment of delaytime cannot be made.

● Switching this unit to the “6ch” mode will input no signal tothis unit if there is no connection to the 6CH DISCRETEINPUT terminals of this unit.

RX-V393RDS

RX-V493RDS

DVD/LDTV/DBS

TAPE/MD MON 2CH/6CH

VIDEOVCR

2CH/6CH

DVD/LDTV/DBS

TAPE/MD MON 2CH/6CH

or

To listen to a decoded source using Dolby Digital (AC-3) or DTS by reproducing the signalsinput to the 6CH DISCRETE INPUT terminals of this unit.

27

En

glish

1 Select the source to be recorded.

2 Play the source and then turn the VOLUME control upto confirm the input source. (For detailed informationon the tuning operations, refer to the page 29.)

3 Begin recording on the tape deck (or MD recorder etc.)or VCR connected to this unit.

4 If the tape deck (or MD recorder etc.) is used forrecording, you can monitor the sounds being recordedby pressing TAPE/MD MONITOR (MON) so that the“TAPE MON” indicator lights up on the display.

Notes● The settings of DSP and the VOLUME, BASS, TREBLE

and BALANCE controls have no effect on the materialbeing recorded.

● In step 1, do not make an input source selection so that“6ch” appears on the display. Signals input to this unit’s6CH DISCRETE INPUT terminals cannot be recorded by atape deck, MD recorder or VCR.

l620

28

40

60

l2

8

4

2

0–dB

VOLUME

TO RECORD A SOURCE TO TAPE (OR MD)

2

l620

28

40

60

l2

8

4

2

0–dB

1 4

TUNER CDPHONO

DVD/LDTV/DBS

CDPHONO

TAPE/MD MON 2CH/6CH

2

l620

28

40

60

l2

8

4

2

0–dB

14RX-V393RDSRX-V493RDS


TAPE/MD MONITOR VCR

TUNER PHONO

1 Press once or more so that “SWFR” appears on thedisplay.

2 By continuously pressing the “+” or “–” side of theTIME/LEVEL button, the level value changes continuously.If you feel that bass tone is insufficient, increase the level,and if you feel that bass tone is overly emphasized,decrease the level.

Control range: MIN, –20 to 0 dB

28

Selecting the SPEAKER systemBecause one or two speaker systems (as main speakers) canbe connected to this unit, the SPEAKERS switches allow youto select speaker system A or B, or both at once.

Adjusting the BALANCE controlAdjust the balance of the output volume to the left and rightspeakers to compensate for sound imbalance caused byspeaker location or listening room conditions.

NoteThis control is effective only for the sound from the mainspeakers.

Adjusting the BASS and TREBLEcontrols

BASS : Turn this clockwise to increase (or counter-clockwise to decrease) the low frequency response.

TREBLE : Turn this clockwise to increase (or counter-clockwise to decrease) the high frequency response.

NoteThese controls are effective only for the sound from the mainspeakers.

SPEAKERS

A

ON OFF

B

BALANCE

5 54

3

2l 0 l

2

3

4L R

BASS TREBLE

5 54

3

2l 0 l

2

3

45 5

4

3

2l 0 l

2

3

4

Adjusting the subwoofer output level RX-V493 onlyRX-V493RDS only

If your audio system includes a subwoofer, and an amplifier driving the subwoofer (or a subwoofer system including an amplifier) isconnected to the SUBWOOFER OUTPUT terminal on the rear of this unit, you can adjust the subwoofer output level on this unit.


TIME/LEVEL

Adjustable

29

En

glish

1 Select “TUNER” as the input source.

2 Select the reception band (FM or AM) confirming it onthe display.

3

4 Tune to a desired station manually.

* To continue tuning search, press and hold the button.

1 Select “TUNER” as the input source.

2 Select the reception band (FM or AM) confirming it onthe display.

3

4 To tune to a higher frequency, press the right sideonce.To tune to a lower frequency, press the left side once.

* If the station where tuning search stops is not the desiredone, press again.

* If the tuning search does not stop at the desired station(because the signals of the station are weak), change tothe MANUAL TUNING method.

TUNING OPERATIONSNormally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) ispossible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

Notes• If you tune to an FM station manually, it is received in

monaural mode automatically to increase the signal quality.• When tuned in to a station, the frequency of the received

station is shown on the display. If an RDS station thatemploys PS data service is received, the frequency is thenreplaced by the station name. Refer to page 35 for details.

AUTOMATIC TUNING MANUAL TUNING

FM/AM

TUNINGMODE

AUTO/MAN’L MONO

TUNINGMODE

AUTO/MAN’L MONO

DOWN TUNING UP

DOWN TUNING UP

Turn the “AUTO”indicator off.

21

l620

28

40

60

l2

8

4

2

0–dB

34

or

FM/AM

or

AUTO

TUNER CDPHONO TUNER CDPHONO

30

1 Tune to a desired station.(Refer to the previous page for tuning procedure.)

2 Select a desired group (A – E) of preset stationsconfirming it on the display.

3

4 Select a preset station number where you want toprogram the station before the “MEMORY” indicatorgoes off from the display.

* In the same way, program other stations to A2, A3 ... A8.* You can program more stations to preset station numbers

on other groups in the same way by selecting other groupsin step 2.

11 Select the group of preset stations.

22 Select the preset station number.

Notes• A new setting can be programmed in place of the former

one.• For presets, the setting of the reception mode (stereo or

monaural) is stored along with the station frequency.

Memory back-upThe memory back-up circuit prevents the programmed datafrom being lost even if this unit is turned into the standbymode or the power plug is disconnected from the AC outlet orthe power is cut due to temporary power failure. If, however,the power is cut for more than one week, the memory may beerased. If so, it can be re-programmed by simply followingthe PRESET TUNING steps.

MANUAL PRESET TUNING

This unit can store station frequencies selected by tuning operation. With this function, you can recall any desired station by onlyselecting the preset station number where it is stored. Up to 40 stations (8 stations x 5 groups) can be stored.

PRESET TUNING

To store stations To recall a preset station

2, 11 34, 22

MAN’L/AUTO FM

MEMORY

MEMORY

A/B/C/D/EPRESET

A/B/C/D/E

Flashes on and offfor about 5 seconds.

PRESET

MHz AUTO

STEREO

0 20 l00

CONCERT HALL

Shows the displayed station has been programmed to A1.

l620

28

40

60

l2

8

4

2

0–dB

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

31

En

glish

1

2

3

To tune to higher frequencies, press right side once.To tune to lower frequencies, press left side once.* If the TUNING button is not pressed, in a while, the

automatic preset tuning begins automatically toward higherfrequencies.

The automatic preset tuning begins from the frequencycurrently displayed. Received stations are programmed toA1, A2 ... A8 sequentially.* If more than 8 stations are received, they are also

programmed to the preset station numbers on other groups (B, C, D and E) in that order.

If you want to store the first station received by theautomatic preset tuning to a desired preset stationnumber.If, for example, you want to store the first received station toC5, select “C5” by using the A/B/C/D/E button and the presetstation number selector buttons after pressing the MEMORYbutton in step 2. Then press the TUNING button. The firstreceived station is stored to C5, and next stations to C6, C7 ...sequentially.If stations are stored up to E8, the automatic preset tuning isfinished automatically.

When the automatic preset tuning is finishedThe display shows the frequency of the last preset station.Check the contents and the number of preset stations byfollowing the procedure of the section “To recall a presetstation” on page 30.

To recall a preset stationSimply follow the procedure of the section “To recall a presetstation” on page 30.* A recalled station is shown by the frequency or station name

on the display.

Notes● You can replace a preset station by another FM or AM

station manually by simply following the procedure of thesection “To store stations” on page 30.

● The automatic preset tuning search will be performedthrough all RDS network frequencies until stations arestored up to E8. If the number of received stations is notenough to be stored up to E8, the search is finishedautomatically after searching all frequencies.

● With this function, only RDS stations with sufficient signalstrength are stored automatically. If the station you want toprogram is weak in signal strength, tune to it in monauralmanually and program it by following the procedure of thesection “To store stations” on page 30.* There may be a case that this function cannot receive a

station which could be received by the automatic tuningmethod. This is because this function receives a largevolume of PI (Program Identification) data along with thestation.

AUTOMATIC PRESET TUNINGYou can also make use of an automatic preset tuning function for RDS stations only. By this function, this unit performs automatictuning and stores RDS stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as inthe manual preset tuning method on page 30.* Refer to page 33–37 for details on RDS stations.

To store stations

Press and hold for morethan 3 seconds.

FM/AM

MAN’L/AUTO FM

MEMORY

l620

28

40

60

l2

8

4

2

0–dB

1 32

Flashes.

DOWN TUNING UP

PRESET

MEMORY AUTO

32

EXCHANGING PRESET STATIONSYou can exchange the places of two preset stations with each other as shown below.

Example)If you want to shift the preset station on E1 to A5, and viceversa.

1 Recall the preset station on E1 (by following the methodof “To recall a preset station” on page 30).

2

3 Next, recall the preset station on A5 by following thesame method with step 1.

4

Shows the exchange of stations is completed.

Flashes.

Flashes.

EDIT

EDIT

MEMORY

PRESET

MEMORY

PRESET

2, 4

l620

28

40

60

l2

8

4

2

0–dB

33

En

glish

RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stationsusing this system transmit an inaudible stream of data in addition to the normal radio signal.RDS data contains various information, such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT(Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc.RDS function is carried out among the network stations.* This unit utilizes PI, PS, PTY, RT, CT and EON to receive RDS broadcast stations.

Displaying RDS data

In areas where RDS broadcasts cannot be received, the RDS broadcast functions do not operate. (The procedures from page 33 topage 37 are not necessary.)

This unit can be turned into the following five modes to displayRDS data.

PS (Program Service name) mode:Displays the name of the RDS station now being receivedinstead of the frequency.

PTY (Program Type) mode:Displays the type of the program on the RDS station now beingreceived. There are 15 program types to classify RDSstations. Refer to the next page for details.

RT (Radio Text) mode:Displays information about the program (such as title of thesong, name of the singer, etc.) on the RDS station now beingreceived.

CT (Clock Time) mode:Displays current time. This signal comes from the RDS stationnow being received.

EON (Enhanced Other Networks)mode:Automatically receives a program of the designated programtype when its broadcast starts, in place of the program nowbeing received. When the broadcast of the called programends, the previously received program (or another program onthe same station) is recalled.

RECEIVING RDS STATIONS

PRESET

kHzMHz


SLEEP

TAPE MON

STEREO

0 20 l00

ms dB

PRO LOGICENHANCED

CONCERTVIDEO

MONOMOVIE STADIUM


NORMWIDE

PHANTOMEFFECT OFF


RT CTPTY

34

News:Short accounts of facts, events and publiclyexpressed views, reportage and actuality.

Current affairs:Topical program expanding or enlargingupon the news, generally in differentpresentation style or concept, includingdocumentary debate, or analysis.

Information:Program whose purpose is to impart advicein the widest sense, including meteorologicalreports and forecasts, consumer affairs,medical help, etc.

Sport:Program concerned with any aspect of sport.

Education:Program intended primarily to educate, ofwhich the formal element is fundamental.

Drama:All radio plays and serials.

Culture:Programs concerned with any aspect ofnational or regional culture, includingreligious affairs, philosophy, social science,language, theatre, etc.

Science:Programs about the natural sciences andtechnology.

Varied:Used for mainly speech-based programsusually of light-entertainment nature, notcovered by above categories. Examples are:quizzes, panel games, personality interviews,comedy and satire.

Pop:Commercial music, which would generally beconsidered to be of current popular appeal,often featuring in current or recent recordsales charts.

Rock:Contemporary modern music, usually writtenand performed by young musicians.

M.O.R.:(Middle of the Road Music). Common term todescribe music considered to be “easy-listening”, as opposed to Pop, Rock orClassical. Music in this category is often butnot always, vocal, and usually of shortduration (

35

En

glishChanging the RDS modes

When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the stationlight up on the display. By pressing the RDS MODE/FREQ button once or more, you can change the display mode among the RDSmodes employed by the received station in the order shown below. (The RDS mode not employed by the station cannot beselected.) Illumination of the indicator on the head of a name of RDS mode shows that the corresponding RDS mode is nowselected.* When an RDS station is received, do not press the RDS MODE/FREQ button until one or some names of RDS modes light up on

the display. If the button is pressed before one or some names light up on the display, the mode cannot be changed. This isbecause the unit has not received all of the RDS data on the station yet.

* If no name of RDS mode lights up on the display, the mode cannot be changed.

PS mode The name of the station being received is displayed.If the station does not employ the PS data service, this modewill not be selected.

PTY mode The type of the program on the station being received isdisplayed. If the station does not employ the PTY dataservice, this mode will not be selected.(You can make this unit search for a station which isbroadcasting a program of your desired program type. Fordetails, refer to the next page.)

RT mode Information about the program on the station being receivedis displayed. Information is displayed by a maximum of 64Roman Alphabets including umlaut sign. If other charactersare used on the RT data, they are displayed with under-bars. If the station does not employ the RT data service, this modewill not be selected.

CT mode Current time is displayed in the following form. The CT datafrom the station being received changes every minute.

If the data is accidentally cut off, “CT WAIT” may light up. Ifthe station does not employ the CT data service, this modewill not be selected.

Frequency The frequency of the station being received is displayed.display mode

RDS MODE/FREQ

Notes• RDS data service cannot be utilized by this unit if the received signal is not strong enough. Especially, the RT (Radio Text mode)

needs much data to be received, so it may occur that RT mode cannot be displayed even if other RDS modes (PS, PTY, etc.) aredisplayed.

• There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the TUNING MODEbutton so that the “AUTO” indicator goes off from the display. Though the reception mode is changed to monaural by thisoperation, when you change the display to an RDS mode, RDS data may be displayed.

• If the signal strength gets weakened by external interference during receiving an RDS station, the RDS data service may be cut offsuddenly and “...WAIT” will light up on the display.

Hour Minute

36

1 Turn the unit into the PTY SEEK mode.

* The program type of the station now being received or“NEWS” flashes on the display.

2 Select the desired program type.

3 Begin searching all preset RDS stations.

* The “PTY HOLD” indicator lights up on the display.

• If a station which broadcasts a program of the programtype is found, the unit stops at the station and theprogram type lights up.

• If the called station is not the desired one, press the PTYSEEK START button once more.The unit begins searching for another station whichbrodcasts a program of the same program type.

• To stop the search, press the PTY SEEK START buttononce more.

To cancel this functionIf the PTY SEEK MODE button is pressed once more, thePTY SEEK mode is canceled.

Calling a program of your desired program typefrom among preset RDS stations (PTY SEEK)

By designating a program type, the unit automatically searches all preset stations for an RDS station which broadcasts a program ofthat program type.* There are 15 program types to classify RDS stations. For details, refer to page 34.

Flashes.

Flashes.

l620

28

40

60

l2

8

4

2

0–dB

31

2

DOWN TUNING UP

MODE START

PTY SEEKMODE START

PTY SEEK

AUTO PTY HOLD

PS RT CTPTY

37

En

glish

1 Make sure that the “EON” indicator is illuminated on thedisplay.

* If the “EON” indicator is not illuminated on the display,receive an (or another) RDS station so that the “EON”indicator lights up on the display.

2 Select a desired program type, NEWS, INFO, AFFAIRSor SPORT.

Press once or more.

The search is performed among all preset RDS stations inthe background. If a program is found, the program isautomatically received when its broadcast starts.

3 When the broadcast of the called program ends, thepreviously received program (or another program onthe same station) is recalled.

To cancel this functionPress the EON button once or more, so that no program typename lights up on the display.

Lights up.

EON

Making this unit call a program of your desired program type automaticallywhen its broadcast starts

This function uses the EON (Enhanced Other Networks) data service on the RDS station network.By only selecting a desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches all preset RDSstations for a station that broadcasts a program of that program type in the background, and, if found, receives a program when itsbroadcast starts in place of the program now being received.* This function can be used only when an RDS station that employs the EON data service is received. (When such a station is

received, the “EON” indicator lights up on the display.)

l620

28

40

60

l2

8

4

2

0–dB

2

PS EON NEWSRT CTPTY

PS EONRT CTPTY

kHzMHz


SLEEP

TAPE MON

STEREO

0 20 l00

ms dB

PRO LOGICENHANCED

CONCERTVIDEO

MONOMOVIE STADIUM


NORMWIDE

PHANTOMEFFECT OFF


RT CTPTY

Flashes.

kHzMHz


SLEEP

TAPE MON

STEREO

0 20 l00

ms dB

PRO LOGICENHANCED

CONCERTVIDEO

MONOMOVIE STADIUM


NORMWIDE

PHANTOMEFFECT OFF


RT CTPTY

38

Brief Overview of Digital Sound Field Programs

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most ofthese are precise digital recreations of actual acoustic environments. The data for these sound fields was recorded at actuallocations using sophisticated sound field measurement equipment.NoteThe channel level balance between the left and right rear effect speakers may vary depending on the sound field you arelistening to. This is due to the fact that most of these sound field recreations are actual acoustic environments.

PROGRAM FEATURE

This program is used for playback of sources encoded with Dolby Surround.PRO LOGIC The application of a sophisticated digital signal processing system reduces crosstalk and directs or steers

the sound source more smoothly and precisely, as compared to conventional types.

This program is also used for playback of sources encoded with Dolby Surround.

PRO LOGICEnhancing the “Normal” Dolby Pro Logic, the DSP technology simulates the multi-surround speaker

ENHANCEDsystems of a 35 mm movie theater. This effect creates a wide surround sound field, and expands thesound stage with an improved presence image. This program is used for musical based movies, as well asdrama and comedy based movies.

CONCERT VIDEOThis program is effective for music videos and gives excellent depth and clarity for vocals. For opera, theorchestra and stage are ideally recreated, letting you feel as if you were in an actual concert hall.

MONO MOVIE

This program is designed specifically to enhance mono source programs. Compared to a strictly monosetting, the sound image created in this mode is wider and slightly forward of the speaker pair, lending animmediacy to the overall sound. It is particularly effective when used with old mono movies, newsbroadcasts and dialog.

STADIUM This program gives you long delays between direct sounds and effect sounds, and extraordinarily spacious feel of a large stadium.

DISCO This program recreates the acoustic environment of a lively disco in the heart of a very lively city. Thesound is dense and highly concentrated. It is also characterized by a high-energy, “immediate” sound.

ROCK CONCERT This program is ideally suited for rock music. You will experience a very dynamic or lively sound field.

CONCERT HALLIn this program, the center will appear to be deep behind the main speakers, creating an expansive largehall ambience. Orchestra and opera music are suited for this sound field.

USING DIGITAL SOUND FIELD PROCESSOR (DSP)This unit incorporates a sophisticated, multi-program digital sound field processor. The processor allows you to electronically expandand change the shape of the audio sound field from both audio and video sources, creating a theater-like experience in yourlistening room. You can create an excellent audio sound field by selecting a suitable sound field program (this will, of course, dependon what you will be listening to), and adding desired adjustments.

In addition, this unit incorporates a Dolby Pro Logic Surround decoder for multi-channel sound reproduction of sources encoded withDolby Surround. The operation of the Dolby Pro Logic Surround decoder can be controlled by selecting a corresponding DSPprogram including a combined operation of the Yamaha DSP and the Dolby Pro Logic Surround.

39

En

glish

1 Follow steps 1 – 6 shown in “BASIC OPERATIONS” onpage 25.

2 Select the desired program that is suitable for thesource.

a)

Turn the DSP on so that aprogram name lights up onthe display.

b)

Select a desired programconfirming it on the display.

The selected program name is shown on the display.

3 If desired, adjust the delay time and the output level ofeach speaker. (For details, refer to the correspondingdescriptions on page 40 and 41.)

Notes● Program selection can be made to individual input sources.

Once you select a program, it is linked with the input sourceselected at that time. So, when you select the input sourcenext time, the same program is automatically called.

● If you prefer to cancel the DSP, press the EFFECT button.The sound will be the normal 2-channel stereo withoutsurround sound effect.

● When CONCERT VIDEO, MONO MOVIE, STADIUM,DISCO, ROCK CONCERT or CONCERT HALL is selected,no sound is heard from the center speaker.

● When a monaural sound source is played with DOLBY PROLOGIC or DOLBY PRO LOGIC ENHANCED, no sound isheard from the rear speakers.

● When this unit’s Dolby Pro Logic Surround decoder is used,if the main-source sound is considerably altered byoveradjustment of the BASS or TREBLE control, therelationship between the center and rear channels mayproduce an unnatural effect.

● To select a DSP program on the remote control transmitter,first turn the DSP on so that a program name lights up onthe display by pressing the EFFECT key. Next, select adesired DSP program by pressing the or side ofPROGRAM key.

* Pressing the PROLOGIC or ENHANCED key turnsthe DSP on and selects the corresponding programdirectly.

Playing a source with an effect of the digital sound field processor (DSP)

PROGRAM

PRO LOGIC

l620

28

40

60

l2

8

4

2

0–dB

2

EFFECT

ON/OFF

PROLOGIC ENHANCED

l620

28

40

60

l2

8

4

2

0–dB

2

2CH/6CH


DISC

VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

TUNER

CD

PHONO

VIDEOVCR

POWER /I



DISC

POWER /I VOLUME

PLAY




– +

SLEEP

TAPEA/B

ON/OFF

2CH/6CH

TUNER

CD

PHONO


DVD/LDVCR TV/DBS

22


PRO LOGIC

PRO LOGIC ENHANCED

EFFECT

PROGRAM

40

If desired, you can adjust the sound output level of the centerspeaker even if the output level is already set in “SPEAKERBALANCE ADJUSTMENT” on page 24.

1 Press once or more so that “CENTER” appears on thedisplay.

2 By continuously pressing the “+” or “–” side of theTIME/LEVEL button, the level value changes continuously.The value stops changing momentarily at the preset point(0 dB).

Control range: MIN, –20 to +10 dB

Notes● This adjustment can be made only when the digital sound

field program DOLBY PRO LOGIC or DOLBY PRO LOGICENHANCED is selected.

● Once the output level is adjusted, the level value will be thesame in all the digital sound field programs mentionedabove.

NoteThis adjustment is useful only when the digital sound fieldprogram DOLBY PRO LOGIC or DOLBY PRO LOGICENHANCED is selected.

Adjustment of the CENTER LEVEL

TIME/LEVEL


Adjustable

Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rearspeakers even if the output level is already set in “SPEAKERBALANCE ADJUSTMENT” on page 24.

1 Press once or more so that “REAR” appears on the display.

2 By continuously pressing the “+” or “–” side of theTIME/LEVEL button, the level value changes continuously.The value stops c

rx-v493rds rx-v393rds - yamaha corporation€¦ · 2 indoor fm antenna antenne fm intérieure...

Documents