Slide 1

Slide 2

S PECIFYING A UTHORITY T UTORIAL ( PLEASE CLICK ON SPEAKER ICON TO HEAR INSTRUCTIONS ON EACH OF THE FOLLOWING SLIDES )

Slide 3

What is a Specifying Authority? What does a Specifying Authority do? Specifying Authority Tutorial Specifying Authority (SA) & CMA Overview

Slide 4

What is a Specifying Authority (SA) ? The entity that specifies the fenestration products/systems and components, and identifies the suppliers to be used on a commercial or nonresidential project in order to meet design and performance requirements. The Specifying Authority enters into a license agreement with NFRC and obtains an NFRC label certificate for a project. This entity may be, but is not limited to, an architect, engineer, fenestration manufacturer, general contractor or supplier. Executes a project-specific license agreement with NFRC Legal entity owning the CMA Label Certificate Label Certificates will incur no fees in 2014! Specifying Authority Tutorial

Slide 5

Provides the ACE with detailed project specifications Logs into CMAST and opens the notification information Digitally signs the online NFRC License Agreement Accesses the LC publically on web site Specifying Authority Tutorial What does the SA do?

Slide 6

Provides the ACE with detailed project specifications This can be done via the Specifying Authority Project Data Form (see below) or by filling out a form provided by your ACE. Specifying Authority Tutorial What does the SA do?

Slide 7

Specifying Authority Project Data Form Specifying Authority Tutorial The Specifying Authority Project Data Form can be found on the NFRC website, on the Specifying Authority page (http://www.nfrc.org/CMA/SA.aspx).http://www.nfrc.org/CMA/SA.aspx This form is to help assist the Specifying Authority in providing all the pertinent information to the ACE org. The Specifying Authority Project Data Form has all the necessary data for the ACE, including the Specifying Authority & project information.

Slide 8

Specifying Authority Tutorial Specifying Authority Project Data Form The Specifying Authority Project Data Form will also have information regarding the ACE & IA.

Slide 9

Specifying Authority Tutorial Specifying Authority Project Data Form Frame, Glazing & Spacer Supplier information must also be filled out by the Specifying Authority.

Slide 10

Specifying Authority Tutorial Specifying Authority Project Data Form As the example here shows, youll need details of the framing sections to ensure your ACE has the proper components. Notice Frame Assemblies are numbered: CMA CPD ID # can be found in the CMA CPD at this link: http://cmast.nfrc.org/Component/FrameComponentFind.aspx

Slide 11

Specifying Authority Tutorial Specifying Authority Project Data Form As the example here shows, youll need details of the spacer sections to ensure your ACE has the proper components. Notice Spacer Edge Seal Assemblies are numbered: CMA CPD ID # can be found in the CMA CPD at this link: http://cmast.nfrc.org/Component/SpacerComponentFind.aspx

Slide 12

Specifying Authority Tutorial Specifying Authority Project Data Form As the example here shows, youll need details of the glazing sections to ensure your ACE has the proper components. Notice Glazing Assemblies are numbered: CMA CPD ID # can be found in the CMA CPD at this link: http://cmast.nfrc.org/Component/GlazingComponentFind.aspx

Slide 13

Specifying Authority Tutorial Specifying Authority Project Data Form As the example here shows, youll assemble your sections (along with width & height) to ensure your ACE has the proper components. Insert the Assembly Number as appropriate:

Slide 14

Logs into CMAST web and opens the notification information Specifying Authority Tutorial What does the SA do?

Slide 15

Digitally signs the online NFRC License Agreement Specifying Authority Tutorial

Slide 16

What does the SA do? Accesses the LC publically on web site Specifying Authority Tutorial

Slide 17

S PECIFYING A UTHORITY T UTORIAL -P ART 2

Slide 18

C OMPONENT M ODELING A PPROACH O VERVIEW CMA / ACE Training17

Slide 19

CMA Fundamental Concept CMA / ACE Training18 Glazing infill / Center of Glazing assembly Frame system / Frame assembly Spacer system / spacer assembly PRODUCT CONFIGURATION Overall product rating calculation Glazing component Spacer componentFrame component

Slide 20

W HERE DO C OMPONENTS C OME F ROM ? Frame Components simulated by NFRC accredited simulations labs Validation test by NFRC accredited lab IA reviews test and sim report, uploads to CMAST CMAST eliminates the need for detailed simulation! Great simplification for general use CMA Overview CMA / ACE Training19

Slide 21

W HERE DO C OMPONENTS C OME F ROM ? Spacer components simulated by NFRC accredited labs IAs review and upload to CMAST No validation testing NFRC offers 4 generic spacers Spacer component data are limited to date CMA Overview CMA / ACE Training20

Slide 22

G LAZING C OMPONENTS Manufacturers submit optical measurements to LBNL for initial review LBNL administers interlaboratory comparison to industry LBNL upload data to International Glazing database (IGDB) Manufacturers ask to participate with NFRC rating program Pay annual participation and annual component fee CMA Overview CMA / ACE Training21

Slide 23

CMA Program Terms CMA Software Tool (CMAST) CMA Product Certification Program (PCP) NFRC 705, download from www.nfrc.orgwww.nfrc.org Calculation Entity Approval Program (CEAP) NFRC 708, download from www.nfrc.orgwww.nfrc.org Governs CEAP Program, ACE activity ACE-Approved Calculation Entity ACE Organization-where ACEs employed Accreditation Policy Committee (APC) Reports to Board, manage CEAP CMA / ACE Training22

Slide 24

CMA Product Certification Program (PCP) Process Product certification occurs when a products ratings become part of a CMA Label Certificate Products certified for a particular project can be used in subsequent projects Will get new CPD IDs Approved components and certified products are maintained indefinitely in CMAST until they are de-listed either voluntarily or for cause CMA / ACE Training23

Slide 25

NFRC Ratings Available in CMAST From CMAST U-factor -Heat loss rating SHGC-Solar Heat Gain Coefficient rating VT-Visible Transmittance rating Not available in CMAST Air Leakage rating Condensation Resistance rating (CR) Could be in future CMA / ACE Training24

Slide 26

CMA / ACE Training25 CMAST DEVELOPMENT Manufacturers have components (glazings, frames, spacers) simulated, and submits to the IA CMA Process

Slide 27

CMA / ACE Training26 CMAST DEVELOPMENT The IA reviews and approves all components before they are available for use in CMA Once uploaded into the online CMAST database, components are available to all users CMA Process

Slide 28

CMA / ACE Training27 LABEL CERTIFICATE DEVELOPMENT During this phase, the Specifying Authority contacts an NFRC ACE Mfr. or Ind. Organization to generate CMA Label Certificate. The IA performs audits and spot reviews of CMA Label Certificates generated by ACE Organizations CMA Process

Slide 29

CMA / ACE Training28 FIELD INSPECTION PHASE Finally, the CMA Label Certificate is posted on-site for field inspection CMA Process

Slide 30

CMA Quality Assurance Process Documentation Trail Audits for SAs IA conducts a documentation (paper-trail) audit to ensure the label certificate systems match the actual systems Confirm LC calculations match actual product using drawings and BOMs 1 in 20 (5%) chance of Label certificates audit CMA / ACE Training29

Slide 31

CMA I TEMS CMA may not be used on residential projects NFRC 705, section 1.2.2.1 indicates an SA may request LCs for commercial only Limited product types, see NFRC 100, section 5.9.2 (may be updated soon) NFRC 704 has all CMA fees (updated annually, on web site) Many changes for manufacturers in 2014 Limited changes for ACE Orgs CMA / ACE Training30

Slide 32

CMA BID R EPORT CMA / ACE Training31 Used During Plan Review or Bidding process Not Valid For Code compliance

Slide 33

Overview, CMA Program NFRC CMA Label Certificate (cover page): CMA / ACE Training32

Slide 34

Overview, CMA Program NFRC CMA Label Certificate (page 2): CMA / ACE Training33

Slide 35

Overview, CMA Program Supplemental information report Now Optional! Must Select before LC request! CMA / ACE Training34

Slide 36

CMA / ACE Training35 http://www.nfrc.org/CMA/Default.aspx CMA Information

Slide 37

CMA AND THE B UILDING E NERGY C ODES Most states reference ASHRAE 90.1 and IECC NFRC 100 and NFRC 200 are in each of these codes exclusively Only defaults are alternative NFRC 100 and NFRC 200 reference are how codes make reference to CMAST and CMA program CMA / ACE Training36

Slide 38

CMA AND E NERGY C ODES AAMA 507 certificates not allowed per all energy codes Defeated at IECC about 3 years ago Encourage your clients to use LCs Discourage all other compliance methods Call NFRC for clarification CMA / ACE Training37

Slide 39

NFRC public site: www.nfrc.orgwww.nfrc.org NFRC Community Site: http://nfrccommunity.site-ym.com/http://nfrccommunity.site-ym.com/ CMA Webpage: http://www.nfrc.org/CMA/Default.aspxhttp://www.nfrc.org/CMA/Default.aspx ACEs: http://nfrccommunity.site- ym.com/default.asp?page=ACEshttp://nfrccommunity.site- ym.com/default.asp?page=ACEs NFRC Staff: Jen Padgett CMA Program Coordinator, 240-821-9515 Ray McGowan Senior Program Manager, 240-821-9510 CMAST Support Email: cmasupport@nfrc.orgcmasupport@nfrc.org CMA / ACE Training38 Additional Resources

Slide 40

S PECIFYING A UTHORITY T UTORIAL You have completed the NFRC Specifying Authority Tutorial. You may sign the Supplemental Registration Form now.