s10a. outline s10a overview s10a spec s10a option device target application
TRANSCRIPT
Semi-Rugged Tablet PC
S10A
Outline S10A overview S10A SPEC S10A Option deviceTarget Application
S10A Overview
213mm
18mm
264mmDimension
No. Component
1
Power LED• Off: Power off• Solid green: Power on / When in power off mode, lights green when charging.• Blinking green: AC power on and the battery is charging
2 HDD LED • Lights green to indicate hard disk drive activity.
3
WLAN LED• Off: No RF signal / No LAN connection• Solid green: WLAN connected• Blinking green: TX/RX transmission
4 Microphone
5
S1 / Brightness button• Functions as a barcode switch key when a barcode scanner is connected, otherwise, can be assigned as a function key (F4).• When mode is enabled, press to decrease brightness.
6S2 / Brightness button• Can be assigned as a function key (F5).• When mode is enabeld, press to increase brightness.
7 Rubber bumper indents • Lock the rubber bumpers
8 Touch-sensitive display
9 Speakers
10 Function keys
11 Fingerprint scanner
12 Keyboard button
13 Mode button
14 Enter button
S10A Front View
No. Component
1Left compartment• Holds the camera and the hard disk drive• Contains the barcode scanner connectors
2Middle compartment• WWAN connector• SIM card slot
3Right compartment• Contains connectors for MSR, RFID, or GPS module
4 External battery contacts / Power switch
5 External battery lock
6 Battery / Memory compartment
S10A Rear View
No. Component
1 Microphone jack
2 Headphone jack
3 VGA port
4 Serial port
No. Component
1 Power button
2 USB ports (2)
3 SD card slot
4 DC-in jack
Left ViewRight View
Desktop docking
No. Component Function1 LAN port Connect an RJ-45 cable to access LAN connection.
2 Serial Connect a serial cable to connect to another PC.
3 USB ports Connect USB connectors to transfer data.
4 DC-IN Connect the AC adapter to charge the battery.
Docking Connectors
Tablet PC DockingYou can use the docking stand to dock the tablet PC when you are at your home or on your office desk. When docked, you can charge both the internal and external batteries or transfer data from your tablet PC to another PC.Attach the S10A to the docking stand as shown.
External battery3800mA / 42.2W
Option: GPS Feature
U-blox 5 Modulesfor GPS and GALILEO Time To First Fix (TTFF): < 1 sec Best-in-class acquisition and tracking sensitivity Receives GPS and GALILEO signals GPS: Supports u-blox AssistNow Online and Offline High immunity to jamming UART serial port, COM2 / 9600 Precision Timing option External antenna connector: IPEX
Option: 1D Barcode Scanner Feature
A "Trigger Key " button on front side Light Source : 617 nm visible LED Optical System : 2,500 pixels CCD Depth of Field : 40 – 235 mm (UPC/EAN 100%, PCS=90%) Scan Rate : 100 scans per second Light Levels : Max. 10,000 Lux (fluorescence) Symbologies : UPC/JAM/EAN, Code 39,Code93,Codabar,Interleave 2 of
5,Industries 2 of 5,Standard 2 of 5,IATA,ISBN/ISSN,Chinese post code, Code 11,MSI/Plessy,EAN-128,Code 128
Option: MSR Feature
Reference Standards: ISO 7810, 7811 Recording Method: Two-frequency coherent phase (F2F) Decoding Method: ISO: Track1 – IATA / Track2 – ABA / Track3 – THRIFT Speed: Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s) Power Requirements: Low voltage operation: 3.3V Message Format: RS232C / TTL: Programmable baud rate, (8, N, 1), ASCII
(Default=19200 bps) ( COM 2 )
Option: WWAN Feature
HSDPA features: 3GPP Release 53.6 Mbps, UL 384 kbpsUE CAT. [1-6], 11, 12 supportedCompressed mode (CM) supported according to 3GPP TS25.212UMTS features: 3GPP Release 4PS data rate – 384 kbps DL / 384 kbps ULCS data rate – 64 kbps DL / 64 kbps ULGSM / GPRS / EGPRS features: Data transferUMTS/HSDPA: Triple band, 850//1900/2100MHzGSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz
Option: RFID Feature
The RFID 13.56Mhz MIFARE® /DESFire® read/write module is designed for fast integration into portable, stationary readers or payment system etc.Interface : 19200,N,8,1 (COM2).Serial Interface, CMOS-TTL.Frequency : 13.56MHzReading distance : 2~5 cmProtocol : GNET PLUSCard Type : ISO 14443A Mifare®1K / 4K / 8K Card TypeTransponders supported : Read/Write
• CPU:– Intel ATOM Z530 1.6G
• Chipset: US15W• BIOS:Award• Memory:
– 1G/2GB SO-DIMM (533MHz)• VGA chip: US15W (Intel® GMA500)• Display
– 10.4” LED panel , XGA 1024 x 768 • Touch Sensor
– 4-wire resistive touch option sunlight readable • Storage:
– CF CFIII 4G/8G/32G or 1.8 SSD• IO Port
– One PCMCIA slot– One 4-in-1 card reader ( External memory card ,SD1.0 )– One RS-232– Two USB 2.0 type A host port – One VGA output– Line-in x 1; Line-out x 1– One Docking connector– DC-IN jack
• Wireless Communication: – 802.11 b/g/n– Bluetooth V2.0
• O.S:– XP embedded / XP Pro embedded
• Standard Device:– CCD camera 2M – Fingerprint– TPM 1.2
• Option Device: – RFID 13.56M – WWLAN GPRS/3G/3.5G – MSR 1+2+3 track– GPS Module– VESA mount– Stand
• Battery– Hot Swappable Battery– Main battery 1900mA 3S1P– Second battery 3800mA 3S2P
• Operating Temperature:– 0 ~ +40℃ ℃
• Storage Temperature:– -20 ~ +60℃ ℃
• Dimension:– 264x 213 x 18 mm
• Weight: – 1.2Kg
• Rugged Grade– IP54 sealing 3-foot drop
S10A Specification
COUNTRY DOMAIN STANDARDS
USA
EMC FCC Part 15B DoC
Radio FCC ID
FCC Part 15C 15.247 (802.11 b/g)
Other SAR OET65C
Europe
RadioETS/EN 300328 - WLAN(11 b/g )
ETS/EN 301489-1,-17 - WLAN (EMC)
CB_Semko GS EN60950-1
Other SAR EN62311 (50360/361)
NB Notiyf Body (0681)
Taiwan EMC BSMI CNS 13438---None
Japan EMC VCCI V-3/02.04/V-4/02.04
Australia EMC C-Tick AS/NZS CISPR 22RF C-Tick AS/NZS 4268
WEEE 2002/96/EC
BatterySafety CE 60950 + EN 62133Safety UL 2054 Battery Pack---None
Air D0-160D ( Section 21- Category M)
Certification
EFB (Electronic flight bag)
Police officer System
THANK YOU